hi all
after using PA and franco kernel for a while i decided to try out xenon hd + trinity kernel mostly cause i wanted to use the LG 4x lockscreen
so after downloading all the files needed i tried flashing it, the rom , kernel , and lockscreen and same as PA it entered a bootloop so i tried again thinking i might had flashed wrongly again another bootloop , so i tried codenameandroid again BOOTLOOP! i got a little traumatized and flashed back to PA and all is fine again and to be honest i don't know what went wrong and i am now using PA + trinity , is it cause the LG lockscreen is imcompatible with the roms? it's JR...something something ..so what am i doing wrong? i wasted about 2 hours with all these flashing and now i am scared as hell to enter cwm
http://forum.xda-developers.com/showthread.php?t=1626895
Related
I am a new user to the forums and I couldn't post this to the Development section yet.
I did not first ROM install with the Revolution 7.2 I tried us Bricked 3.0 but I got bootloop.
I switched to the Standard Rom for Revolution HD and now everything is working. However when trying to use a different kernel Bricked I get the Bootloop again.
Is this a problem with 7.2 or with the Kernel? Not sure I would like the Swipe to acess instead having to hit the on button all the time. Is it possible to get this without installing the Bricked Kernel?
Thanks
EdwardLotz said:
I am a new user to the forums and I couldn't post this to the Development section yet.
I did not first ROM install with the Revolution 7.2 I tried us Bricked 3.0 but I got bootloop.
I switched to the Standard Rom for Revolution HD and now everything is working. However when trying to use a different kernel Bricked I get the Bootloop again.
Is this a problem with 7.2 or with the Kernel? Not sure I would like the Swipe to acess instead having to hit the on button all the time. Is it possible to get this without installing the Bricked Kernel?
Thanks
Click to expand...
Click to collapse
have you installed the repacked one? and try fastboot erase cache?
EdwardLotz said:
I am a new user to the forums and I couldn't post this to the Development section yet.
I did not first ROM install with the Revolution 7.2 I tried us Bricked 3.0 but I got bootloop.
I switched to the Standard Rom for Revolution HD and now everything is working. However when trying to use a different kernel Bricked I get the Bootloop again.
Is this a problem with 7.2 or with the Kernel? Not sure I would like the Swipe to acess instead having to hit the on button all the time. Is it possible to get this without installing the Bricked Kernel?
Thanks
Click to expand...
Click to collapse
Search for the "repacked kernel for ARHD Rom" thread in the dev forum. You will find all kernels there... I bet there is one with s2w too. But it's not working well for me... Swipe for 2-3 times till the phone wakes up is annoying...
Gesendet von meinem HTC One X
One-X-master said:
have you installed the repacked one? and try fastboot erase cache?
Click to expand...
Click to collapse
I downloaded v.0.3.
Is this not the correct one?
I got the link form the Revolution HD forum under kernels. There was also abeta v0.35 but I didn't use that one. It said it was repacked.
I did erase cache.
I see a v 0.21 that says repacked should I use that. Since I am on the latest build of android 4.0.4 I didn't want to flash an older core.
Thanks
EdwardLotz said:
I downloaded v.0.3.
Is this not the correct one?
I got the link form the Revolution HD forum under kernels. There was also abeta v0.35 but I didn't use that one. It said it was repacked.
I did erase cache.
I see a v 0.21 that says repacked should I use that. Since I am on the latest build of android 4.0.4 I didn't want to flash an older core.
Thanks
Click to expand...
Click to collapse
try another repacked kernel because bricked is outdated and franco and faux's kernels are better or the stock kernel....
Hey, I recently installed the PACman v20.1.0 ROM (4.2.2) and everything's working fine except the bottom of my screen is unresponsive. No matter how much you touch is it doesn't work. The unresponsive space is the bottom half of the icon row on the homescreen dock, the top of the icon is still responsive. Can someone help me out here? (sorry if this is a noob question or mistake ) Thanks!
bramsubhag said:
Hey, I recently installed the PACman v20.1.0 ROM (4.2.2) and everything's working fine except the bottom of my screen is unresponsive. No matter how much you touch is it doesn't work. The unresponsive space is the bottom half of the icon row on the homescreen dock, the top of the icon is still responsive. Can someone help me out here? (sorry if this is a noob question or mistake ) Thanks!
Click to expand...
Click to collapse
Change the trigger area and make it to small...if you change it to none the screen would flicker.
Settings>toolbar>trigger area>small
Or
Toolbar>pie gravity>left/right/whatever you want
I just change the trigger area to small and it helps. No pie for me though
zxstyle07 said:
Change the trigger area and make it to small...if you change it to none the screen would flicker.
Settings>toolbar>trigger area>small
Or
Toolbar>pie gravity>left/right/whatever you want
I just change the trigger area to small and it helps. No pie for me though
Click to expand...
Click to collapse
It worked! Thanks so much :good:
pacman rom flash problem!!!!
I need some help here!!! I'm getting real frustrated trying to flash this pacman ROM....I keep getting stuck on the booting logo it just won't go through the logo...I guess its boot looped...I did everything right on installing it right...wipe/factory reset,flash ROM,flash gapps,reboot...even tried wiping/factory reset,wipe cache,install ROM,install gapps,wipe davlik,fix permissions n reboot...I even tried format system....I don't know what to do now...I have no problem flashing mr1 build 6 AOKP ROM,and one before that was mr1 build 5 AOKP...and also before that I had the cm10 ROM....can somebody help me out here...I really want to check this ROM out....do I need to update my CMW recovery cause I'm working with 5.0.2.6.....or do I need to flash it from my sdcard instead of my internal sdcard cause that's were I flashed the rest of my ROMs....I got the AOKP mr1 build 6 ROM now but like I said I really want to check out pacman ROM...somebody help if somebody can????
i posted in the other thread you had posted but yes do yourself a favor and update your CWM to the latest via Rom manager and you wont have to use those scripts anymore when you do flash roms
steve/pacman rom issue
GOODNEWS!!!! I ACTUALLY UPDATED THE CMW RECOVERY TO TEAM WIN RECOVERY N IT WORKED FLASHING THE PACMAN ROM...I GYES CMW RECOVERY 5.0.2.6 DOESNT WORK WITH THAT ROM....THANKSFOR REPLYING BACK....I got one more question if you can help mw with it...do you
know of any kernels i can flash with the pacman rom for my tmobile galaxy s2...also is there any lockscreen mods too out there that will work with
pacman...i have some aokp lockscreen mods for the different colore but i am not sure it would work w pacman rom...thanks bro!!!
dose8888 said:
GOODNEWS!!!! I ACTUALLY UPDATED THE CMW RECOVERY TO TEAM WIN RECOVERY N IT WORKED FLASHING THE PACMAN ROM...I GYES CMW RECOVERY 5.0.2.6 DOESNT WORK WITH THAT ROM....THANKSFOR REPLYING BACK....I got one more question if you can help mw with it...do you
know of any kernels i can flash with the pacman rom for my tmobile galaxy s2...also is there any lockscreen mods too out there that will work with
pacman...i have some aokp lockscreen mods for the different colore but i am not sure it would work w pacman rom...thanks bro!!!
Click to expand...
Click to collapse
I'd recommend the cerux kernel. I havent played with the lock screen on the 22.0.01 update yet, so i cant give you an answer on that. But make sure you do a backup before you try any mods, so you can always go back if you accidently messed it up.
Hello, I am new in this forum and have a question about Beanstalk.
I have rooted my phone, installed the Kernel from the zip of the rom and then flashed the rom. Mostly all is working, but my wifi is really really slow.
And this is since I installed the rom, before the speed was a lot faster. The search didn't help me very much and google either.
So maybe someone can help me here?
I have tested Wifi fixer but it didn't change anything.
Sorry if this question is stupid, but I am not really an expert about ROMs.
Yup,
Beanstalk run whit the darkkernel 20131024, like CM10.2 LX , i test Beanstalk, LX, Carbon and i can't turn on wifi even whit the dark kernel wifi module 20131024. I think it's a kernel problem ... just wait for the next version...
I now found a solution and it seems to work, but I can't promise ^^
Flashed the TWRP Kernel (http://forum.xda-developers.com/showthread.php?t=2075549) and all is working and wifi ist now a lot faster
falshing
hi
its the first time i'll be using TWRP...
is this ok to change between CWM and TWRP?
i mean, can i freely go back to CWM if TWRP wont work?
thank you...
dropsy1234 said:
hi
its the first time i'll be using TWRP...
is this ok to change between CWM and TWRP?
i mean, can i freely go back to CWM if TWRP wont work?
thank you...
Click to expand...
Click to collapse
I had no problem to change between them, but it's different from persom to person whyever.
well, just got my Gnex... and i really like accept for one issue... lots of random shutdown and reboot there is no pattern i can define..
how ever... fort the most part when it shuts down i am forced to pull the battery inorder to restart it... this is on an unlocked and rooted phone.. but it also happened on a completely stock rom... dang i really like this phone to... im wondering is its an issue with hardware, battery or rom right now im on Jellybean 4.2 rooted.. stock.. not really sure what else to do... perhaps try a different rom and kernel? bit lost here.. i just hope the phone is not defective... that would kinda suck..
any help is appreciated....
scuzzo said:
well, just got my Gnex... and i really like accept for one issue... lots of random shutdown and reboot there is no pattern i can define..
how ever... fort the most part when it shuts down i am forced to pull the battery inorder to restart it... this is on an unlocked and rooted phone.. but it also happened on a completely stock rom... dang i really like this phone to... im wondering is its an issue with hardware, battery or rom right now im on Jellybean 4.2 rooted.. stock.. not really sure what else to do... perhaps try a different rom and kernel? bit lost here.. i just hope the phone is not defective... that would kinda suck..
any help is appreciated....
Click to expand...
Click to collapse
Which kernel are you using and what params for that ( if any ?)...?
Ashtrix said:
Which kernel are you using and what params for that ( if any ?)...?
Click to expand...
Click to collapse
well, right now i have franko kernel installed , no params adjusted... not even sure where i would find the section in settings.. on a stock Verizion JB 4.2... im not even sure what would be the best rom to try
some one suggested MetalC.. but i cant find the Gapps that work with that one... so what i need is a solid ROM, Kernel and Gapps..
i was able to root via the Nexus Root Tool kit... that went well... but now i need to decide what Toro version rom i need to use.. and im keeping an eye out to see if the Franko kernel brings any joy for those random reboots and shutdowns... the guy i bought the Gnex from said he will do a full refund but i want to sort this out if possible... this little machine is too cool just to cash out on...
time to research on roms and stuff i guess..
scuzzo said:
well, right now i have franko kernel installed , no params adjusted... not even sure where i would find the section in settings.. on a stock Verizion JB 4.2... im not even sure what would be the best rom to try
some one suggested MetalC.. but i cant find the Gapps that work with that one... so what i need is a solid ROM, Kernel and Gapps..
i was able to root via the Nexus Root Tool kit... that went well... but now i need to decide what Toro version rom i need to use.. and im keeping an eye out to see if the Franko kernel brings any joy for those random reboots and shutdowns... the guy i bought the Gnex from said he will do a full refund but i want to sort this out if possible... this little machine is too cool just to cash out on...
time to research on roms and stuff i guess..
Click to expand...
Click to collapse
For 4.4 go for cMetal / Playfulgod / dhacker's CM builds, for a 4.3 experience i dunno any one for toro and for kernel i think you can try out MpoKang as it can be flashed on 4.3 and up just have a look in the official thread and you'll be able to find zips plus use trickster app for the kernel control :good: !!
well, a bit of a followup friday swapped out the stock kernel for Franko kernel... and i have had it on for about most of the day yesterday and zero random shutdowns and no SOD.. this little thing is great and its a lot more easy to have this around then a remote for 2 google tv a roku and an xbmc box... i have not delved into new roms, the JB stock seems to be working fine im getting at least 10 hrs out of the battery... this is be best micro tablet i could ever find for 70 bucks... and the screeen is quite nice.. im sure i will be moding soon enough... but for now just a kernel change seems to have put an end to the sleep of death and random shutoffs..
Hello everyone,
I'm posting on here because I can't find any solution to my dilemma which I am sure that other people in the AOSPA legacy community have also experienced. I have been using Paranoid Android on my T989 since the 4.4.3 update and I have regularly updated my roms since then. Somehow ever since I updated my phone to 4.5 beta 3, something prevents me from being able to hear or be heard during regular phone calls around an hour after I restart my phone.
I have tried everything to try to make my phone back to normal, I have updated my versions of AOSPA, I have downgraded to stable versions, I have gone to a debloated stock rom (which worked perfectly fine but who likes touchwiz android 4.1.2?) and back to AOSPA, I tried the latest Carbon nightly rom and the problem persisted, I have wiped my internal memory, cache, davlik, etc. multiple times. I am at a total loss as to what I should do to fix this issue. I'm currently running it on 4.6 beta 1 and I still have the issue.
I really love my GS2 and I don't want to part with it or have it running stock. Please help me.
I really appreciate it,
Chris
I've had the same issue , I was running the latest liquid smooth rom . I just flashed back to stock using Odin and all is fine on the stock rom . I just rooted again and am hesitant to install another kitkat rom for fear of this calling issue ........ Anyone else with this problem ?
Playnhooky said:
I've had the same issue , I was running the latest liquid smooth rom . I just flashed back to stock using Odin and all is fine on the stock rom . I just rooted again and am hesitant to install another kitkat rom for fear of this calling issue ........ Anyone else with this problem ?
Click to expand...
Click to collapse
I am also getting this problem on Slim 7.8....must be an audio-caf issue....Can someone go back to an old KK rom (one from earlier months) and see if they experience the same issue? Preferably cyanogenmod
I flashed to stock rom via oden and spent the weekend with the phone and all was good , I flashed to the latest cm-11 with no addons , stock cm-11 kernal and after an hour or so I lost call audio again . We must have done something to the phone in a previous rom cause not many people are having this issue . Now I have flashed about 75 different roms with no issue , I hope someone finds the problem cause I'm not to keen on the stock rom !
I've seen posted that snapchat was the cause of the no call audio problem we are having , I flashed the latest liquid smooth rom last night , download all my apps that I usually do except snapchat and I've had no issues with the calling bug . All is working great .