allshare cast wireless hub for at&t - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

I have the 50 percent coupon for the samsung s3 accessories. I am currently Looking at the allshare cast for only $50 which is pretty good but it says that it is only compatible for t-mobile or sprint. I have been looking at some custom roms that are sprint or t-mobile based for our at&t and wondering anyones experiences in making these allshare cast wireless hub to work with our at&t phones. If it works can you list the rom you put in and what you had to make it work. Thanks!

Are you talking about the allshare cast dongle? If you are and you have an at&t galaxy s3 i747. Then your phone is already compatible. It should off been installed on your s3 with the latest update.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

do you see "Allshare Cast" in "more settings" under wifi and bluetooth settings?
Thats what you need. I believe it was enabled in one of the latest updates

I think what the OP is referring to is the fact that on Samsung's site, where you can use the 50% off coupon on an accessory, under the Allshare Cast it doesn't list it as being compatible with the AT&T GSIII. I have the same question since I've also got the 50% off coupon and I'd like to pick one of these up. But obviously we want to make sure it works with the AT&T version first.
It may be that Samsung just hasn't updated the page yet, since the AT&T GSIII just recently got the app in the updated firmware.

KentuckyHouse said:
I think what the OP is referring to is the fact that on Samsung's site, where you can use the 50% off coupon on an accessory, under the Allshare Cast it doesn't list it as being compatible with the AT&T GSIII. I have the same question since I've also got the 50% off coupon and I'd like to pick one of these up. But obviously we want to make sure it works with the AT&T version first.
It may be that Samsung just hasn't updated the page yet, since the AT&T GSIII just recently got the app in the updated firmware.
Click to expand...
Click to collapse
How are you guys getting these Samsung Coupons? Is there a promo code that you apply or a direct link that you use?

TBayTom said:
How are you guys getting these Samsung Coupons? Is there a promo code that you apply or a direct link that you use?
Click to expand...
Click to collapse
Here ya go. I followed the OP in this thread and had my coupon in an hour or so.
http://forum.xda-developers.com/showthread.php?t=1916943
*edit* I just realized there isn't much as far as instructions in that thread...lol. All you need to do is head over to Samsung's website and register. They'll send you a specific code a little while after that.

I'm already registered for Samsung.com, I looked through my e-mails and never received any coupons.

I am currently using a tmobile based leaked rom and it does have the setting but I need peoples input if custom roms will work. Would like to know also about the at&t update if it works with allshare cast.
My only reason for allshare cast is to use xbmc on my tv and controlling it wirelessly with my phone . Making it a complete multimedia phone. If the wireless charger came out also, ill be one happy camper lol.
Sent from my SGH-I747 using xda app-developers app

Ill go ahead and chat with one of the reps right now and keep u guys updated.
Sent from my SGH-I747 using xda app-developers app

I have now confirmed that allshare cast wireless hub will work with at&t now. I will be buying it for sure! Ill see if I can get a first impression when I get it. Also will test if custom leaked roms from tmobile and sprint will work with it also.

Just received mine yesterday and it works great on my att phone.
I did hear though that there are a lot of problems with custom roms.

Dual_Everything said:
Just received mine yesterday and it works great on my att phone.
I did hear though that there are a lot of problems with custom roms.
Click to expand...
Click to collapse
I am on AT&T too & I just ordered mine (the allshare cast), the samsung sales agent says that it might not work on AT&T Galaxy SIII. But I went ahead and ordered it looking at the info posted by you . Thank you.
Currently I am running 'NexusMod-Triune-II-(UX)-20120918' and I do see the 'Allshare Cast' switch in the settings. However, I could not get it to work with my samsung Blueray DVD player BD E7500 which does support allshare (I play videos from my PC onto TV via this DVD player using allshare...that confirmed that the DVD player is good). I also tried going back to 'Stock_rooted_Odexed_UCALH9' ROM, but still no luck.
Just hoping it would work with the 'allshare cast dongle'.
Could you please let us know what ROM are you on ? just in case if it doesn't work I can look around and flash the same ROM.
btw, here is a 50% off coupon if anyone wants to use it. 'rE155806p'.
Thank you in advance.

I am on lh9 stock and is working great to me, no lag and no disconnect
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

lthary said:
I am on lh9 stock and is working great to me, no lag and no disconnect
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thank you , appreciate your quick response. I am going to get mine tomorrow. Will test it out and post the results.

Just got mine and almost perfect. The audio is becomes grossly out of sync after a few minutes of play. I only tested using HBO GO for video playback and have not tried music play. I'm using sg3 stock rom rooted and heavily debloated, latest radio ucalh9...

Help with setingup Allshare Cast
john99teg said:
I have now confirmed that allshare cast wireless hub will work with at&t now. I will be buying it for sure! Ill see if I can get a first impression when I get it. Also will test if custom leaked roms from tmobile and sprint will work with it also.
Click to expand...
Click to collapse
Guys,
I bought an unlocked ATT Galaxy S3 and the Allshare Cast Dongle. But I dont see the Allshare cast option in settings. If there is an update how can I update my phone.
Any help is appreciated.

Got it yesterday..followed the steps .. it says connected ..but disconnects immediately.
So far I tried this with Stock lh9, NexusMod, ASTRIODS Jellybean ROMs with no luck.
Btw - I got the galaxy note 10.1 tablet yesterday & that works great with the allshare cast dongle.
Sent from my SPH-L710 using xda premium

Greatminds said:
Got it yesterday..followed the steps .. it says connected ..but disconnects immediately.
So far I tried this with Stock lh9, NexusMod, ASTRIODS Jellybean ROMs with no luck.
Btw - I got the galaxy note 10.1 tablet yesterday & that works great with the allshare cast dongle.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Finally !! got it to work by following the below steps.
1. Went back to UCALH9 Stock via OTA update after flashing back to Stock I747UCALG1 (http://forum.xda-developers.com/showthread.php?t=1896773)
2. Re-Set the counter using Traingle Away and reboot (http://forum.xda-developers.com/showthread.php?p=22463153#post22463153)
Further reading some threads, noticed that we have to be on Stock Radio/Modem in addition to having the Allshare Cast option inthe settings and the counter MUST be 0..

How to get allshare working?
pmkeitt said:
Are you talking about the allshare cast dongle? If you are and you have an at&t galaxy s3 i747. Then your phone is already compatible. It should off been installed on your s3 with the latest update.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Hi,
I have SAMSUNG-SGH-I747 unlocked att phone. I also got the dongle but I am unable to get it to work. How did you get it to work?

Just wanted to share my experience with this device so far.
I confirm it works on AT&T SGS-I747 UCDLK3 stock unrooted.
The very first time it had some difficulty connecting, but I don't recall exactly how I got it to connect. I remember playing with the reset button, plugging/unplugging the power cord, restarting the phone, turning wifi on/off for about 5 minutes until I got connection. Right away the firmware started updating using the "AllShare Cast Dongle S/W Update" app which got installed automatically from the Market a few days earlier.
Now the hub has FW version LJ02 and connects right away every time, and I don't loose connection.
So I've tried different programs to watch videos:
I streamed a 720p movie from my desktop PC, played it with the stock video player. It was a bit choppy but totally viewable.
Netflix: works really good.
Hulu: would be nice EXCEPT sound is lost everytime there's a commercial, so you have to re-sync with the hub everytime and then re-start the phone to regain media volume control.
HBO Go: The movie plays on both TV and phone at the same time (in all other cases the phone screen goes dark). Sounds lags big time and video quality is lower that the other options.

Related

[APP] Samsung Smart view Dual View

Works on Many Samsung TouchWiz based ROMs. Confirmed Working on Galaxy S2, S3, Tab 10.1
For some reason, beyond my comprehension, Samsung have this great app, but have yet to open it up to the SGS3. I have been resorting to downloading it and installing it on my HTC HD2 (Running CM9) backing it up with Titanium, and then copying the backup over to my SGS3, and restoring the backup. A bit round about, but works.
The App, for those that don't know, allows you, with a Samsung high-end TV or BR-Player, use the app to not only as a remote, but as a second mirrored screen, with audio. Great for trips to the kitchen, bathroom, outside, or in another room (although range is limited by your router).
[Supported TV Models]
- Samsung Smart TV released in 2011:
Models greater or equal to LED 7000, PDP 8000
- Samsung Smart TV released in 2012:
Models greater or equal to LED ES7500,(Models greater or equal to LED ES7000 in Europe, Models greater or equal to PDP E8000 Models(E7000 Models in North America)
[Supported Phone]
While technically only SGS2, it works with SGS3 stock rooted rom, but should work on most with a stock base. It will not work on CM9/10 and ASOP ROM's but you could give it a try and let me know.
Here is the actual app, I extracted it from my Titanium backup figuring someone could use it until Samsung get around to updating the Market to let you just download it. The only thing I can't get to work is Bluetooth power on. I can pair with my TV, but it just doesn't show up until I have turned it on. I also had an issue with it working over the the 5Ghz 802.11n band, but with 3.1.9 that doesn't seem to be an issue anymore.
Version 3.1.9 - 39MB - Confirmed Working for me with 2011 PDP51D8000 Model
Version 3.2.0 - 40MB - Also Confirmed working
Older Version 3.1.7 for those of you with issues
The Full description from Google Play:
[About the Application]
This application is Wi-Fi remote control for Samsung Smart TV. If both your phone and TV are connected to the same wireless Router, your phone will link to the TV automatically where you can use your phone like a remote control. The TV can also transfer live feeds to your phone.
[Main Features]
- Dual View
Enjoy TV and other multimedia right from your mobile device that’s connected to Samsung Smart TV. You can even send what you’re watching on your mobile device to TV and watch it from TV.
- Bluetooth PowerOn {I will add, never got this to work, despite pairing TV}
You can use your mobile device to turn on your TV using Bluetooth (available for certain TV and mobile devices only).
- Remote
Your mobile device can work as remote for your Samsung TV or BD products. Full remote screen is provided by default, and three tabs are provided at the bottom of the screen to help you control connected devices with ease. On screen keyboard shows up automatically when you need to enter text.
- Game Controller
With this feature, your mobile device can control games on TV. Full and Simple modes are available. Turn on Gyro function on your mobile device, and control games by tilting your mobile device.
- Movie Note (Models BD-E5900 or above, HTE4000or above (US only))
You can get information of DVD/BD title on your mobile, while you watching movies.
Ratings, synopsis, cast and director's information will be provided.
- Audio Settings (Models HT- E4000 or above)
You can control your speaker system by your phone.
Sound mode, distance of each speaker and sound level(dB) can be changed.
- Remote Scheduler (Models BD-E8000 series, STB-E7000 series EU/Australia/New Zealand Only)
Recording TV shows through your TV when you're outside.
- Settings
You can fine-tune control for TV and BD by adjusting gesture sensitivity in your mobile device.
[How to set up]
1.Check if Wireless Remote Control or Network Remote Control is enabled in your TV’s System or Setup menu. If you don’t see either of them in the menu, Samsung Smart View App can’t be used in your mobile device.
2.Connect wireless/wired router to TV LAN port, or connect Samsung Wireless LAN adapter to TV USB port.
3.Connect your phone to wireless/wired router.
Saving this potentially for a place to list the Rom's it works with. for now it is just:
T-Mobile Stock
T-Mobile Stock-Rooted
That, and isn't that what all the cool posts do
Thank you so much for this. I been lookibg for this app and its weird its not supported on samsungs flagship phone
Sent from my SGH-T999 using xda app-developers app
mastermindx85 said:
Thank you so much for this. I been lookibg for this app and its weird its not supported on samsungs flagship phone
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Glad it helped, It just doesn't make sense to not allow the direct download. It clearly works on the SGS3, so it makes no sense. They have also updated the app several times since the SGS3 release 3.17 was the version I first installed. So they are working on the app, just wish they would switch it on for us to access right from market.
P.S. If this app helped you, please hit thanks
Don't work for me with UE7000D! Galaxy SIII - stock no brand rom ITA no root- Any suggestions for me? Thank you...
Gio72_ said:
Don't work for me with UE7000D! Galaxy SIII - stock no brand rom ITA no root- Any suggestions for me? Thank you...
Click to expand...
Click to collapse
You may have to look around your TV menus for the option to turn on networked remotes. I had an issue where I somehow disabled my phone and could not get it to connect. Also are you using a 2.4ghz or 5ghz router, if using one, try the other. Finally check your router settings, to see if there is something there preventing connectivity.
nygmam said:
You may have to look around your TV menus for the option to turn on networked remotes. I had an issue where I somehow disabled my phone and could not get it to connect. Also are you using a 2.4ghz or 5ghz router, if using one, try the other. Finally check your router settings, to see if there is something there preventing connectivity.
Click to expand...
Click to collapse
Unfortunately, all this has already been verified. Consider that already use a Samsung Galaxy SII and it works great, therefore the router is fine. Among the other with the 'SIII the program works, but also sees the TV when the connection is disconnected after a few seconds by sending an error message that says: "the first use to connect to the internet" .... ideas?
Gio72_ said:
Unfortunately, all this has already been verified. Consider that already use a Samsung Galaxy SII and it works great, therefore the router is fine. Among the other with the 'SIII the program works, but also sees the TV when the connection is disconnected after a few seconds by sending an error message that says: "the first use to connect to the internet" .... ideas?
Click to expand...
Click to collapse
I am not exactly sure what you are seeing. Are you using a stock rom? If you see the TV in the list, but Dual View is not working, then it isn't seeing your phone as supported for Dual View. This could be a build.prop issue, or a necessary file is missing. If it isn't seeing your TV, then there is a connection issue. This is what I had with 802.11n 5Ghz. When on 5Ghz, I couldn't see my TV, back to 2.4Ghz and all was fine. I thought this issue resolved on 3.19.
You may try resetting your router, trying it insecure to see if you can get it to work, but I guess it can be a bit flakey for some. There is nothing inherent in the application, that I know of, that should prevent it from working on the SGS3, unless the ROM you are using is modified. In that case, make a Nandroid backup, install a stock (Rooted if you like) ROm and test again, if it works, it is your ROM, if it doesn't, it is your network.
nygmam said:
I am not exactly sure what you are seeing. Are you using a stock rom? If you see the TV in the list, but Dual View is not working, then it isn't seeing your phone as supported for Dual View. This could be a build.prop issue, or a necessary file is missing. If it isn't seeing your TV, then there is a connection issue. This is what I had with 802.11n 5Ghz. When on 5Ghz, I couldn't see my TV, back to 2.4Ghz and all was fine. I thought this issue resolved on 3.19.
You may try resetting your router, trying it insecure to see if you can get it to work, but I guess it can be a bit flakey for some. There is nothing inherent in the application, that I know of, that should prevent it from working on the SGS3, unless the ROM you are using is modified. In that case, make a Nandroid backup, install a stock (Rooted if you like) ROm and test again, if it works, it is your ROM, if it doesn't, it is your network.
Click to expand...
Click to collapse
As I wrote in my previous post using a stock ROM no brand ITA and my Galaxy SIII is not rooted. As for the router I do not think the problem here as with my Galaxy SII ICS 4.0.3 works perfectly! The Galaxy SIII see TV but while trying to connect it disconnects giving me this error: "connect for the first time you need to connect to the internet". Help me please!
Inviato dal mio Samsung Galaxy SIII
Gio72_ said:
As I wrote in my previous post using a stock ROM no brand ITA and my Galaxy SIII is not rooted. As for the router I do not think the problem here as with my Galaxy SII ICS 4.0.3 works perfectly! The Galaxy SIII see TV but while trying to connect it disconnects giving me this error: "connect for the first time you need to connect to the internet". Help me please!
Inviato dal mio Samsung Galaxy SIII
Click to expand...
Click to collapse
From the router side I would agree, if you see the tv in the app, router is fine. The only thing I can think of is if this is an ITALIAN version issue. I know that when upgrading to ICS some stock ROMs for the SGS2 stopped working. I think this may be the case and something in the localization is causing the connection issue.
In your case maybe try to port the app over from your sgs2 as it could also contain something specific. You can use my method from the first post. Otherwise I am afraid you may need another rom but that's also going to depend on what ROMs it runs on. I only know it works on US T-Mobile but with close to 300 downloads yours is the first time I have seen it not work so there is hopefully a stock based ROM for you with enough not removed to let this app work.
Sorry it isn't better news. As a last resort, you could try to factory reset, install only this app. That way you can ensure no other app is interfering.
Good luck, let me know how it works out.
Sent from my SGH-T999 using xda premium
nygmam said:
From the router side I would agree, if you see the tv in the app, router is fine. The only thing I can think of is if this is an ITALIAN version issue. I know that when upgrading to ICS some stock ROMs for the SGS2 stopped working. I think this may be the case and something in the localization is causing the connection issue.
In your case maybe try to port the app over from your sgs2 as it could also contain something specific. You can use my method from the first post. Otherwise I am afraid you may need another rom but that's also going to depend on what ROMs it runs on. I only know it works on US T-Mobile but with close to 300 downloads yours is the first time I have seen it not work so there is hopefully a stock based ROM for you with enough not removed to let this app work.
Sorry it isn't better news. As a last resort, you could try to factory reset, install only this app. That way you can ensure no other app is interfering.
Good luck, let me know how it works out.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Ok thanks for reply, I will try to extract the app from my SGSII and try it. Can I extract the app only with Titanium Backup? Is there another method? As I said before the terminal is not rooted...
Inviato dal mio Samsung Galaxy SIII
smartview not working on galaxy s3
I have downloaded the app from your previous post, however when I try to open it, it flashes on and off and I can see it discovered the tv but it flashes black before I can select it. Any one else experience this problem?
SuperStoner said:
I have downloaded the app from your previous post, however when I try to open it, it flashes on and off and I can see it discovered the tv but it flashes black before I can select it. Any one else experience this problem?
Click to expand...
Click to collapse
It's almost the same problem! Which device are you using?
Inviato dal mio Samsung Galaxy SIII con Tapatalk 2
Gio72_ said:
It's almost the same problem! Which device are you using?
Inviato dal mio Samsung Galaxy SIII con Tapatalk 2
Click to expand...
Click to collapse
Sprint Samsung Galaxy SIII unrooted running ICS
---------- Post added at 08:38 AM ---------- Previous post was at 08:33 AM ----------
Might I add this app was working previously with the un55c7000 and HTC evo 3d, and evo 4g. Previously working on SGSII before ICS update now flashes black in the same fashion as the SIII. All previous models were able to download from play store however none supported the dual view.
SuperStoner said:
Sprint Samsung Galaxy SIII unrooted running ICS
---------- Post added at 08:38 AM ---------- Previous post was at 08:33 AM ----------
Might I add this app was working previously with the un55c7000 and HTC evo 3d, and evo 4g. Previously working on SGSII before ICS update now flashes black in the same fashion as the SIII. All previous models were able to download from play store however none supported the dual view.
Click to expand...
Click to collapse
Have you tried both versions?
I love these kinds of apps I'll see if I can get it working.
Sent from my SGH-T999 using xda premium
nygmam said:
Have you tried both versions?
Click to expand...
Click to collapse
I will and will not work with either
Inviato dal mio Samsung Galaxy SIII con Tapatalk 2
Gio72_ said:
I will and will not work with either
Inviato dal mio Samsung Galaxy SIII con Tapatalk 2
Click to expand...
Click to collapse
Sorry to hear. Not sure what the issue is, I just updated my ROM, and it still works well for me, not that that helps you
nygmam said:
Sorry to hear. Not sure what the issue is, I just updated my ROM, and it still works well for me, not that that helps you
Click to expand...
Click to collapse
Oh how I wish this worked on LG smart tv's too....
civicvx94 said:
Oh how I wish this worked on LG smart tv's too....
Click to expand...
Click to collapse
+1
I know.. I have the 55" Cinema 3D LED and I'm kind of pissy that you have to have an LG phone to do this

what custom roms work with allshare cast?

Hi. I put my phone back to stock since the custom rom I was using (supposedly stock deodexed) was not working with allshare cast dongle.
I want to change roms again that has mobile hotspot (for those with unlimited plan) and still get it working with the allshare cast. NFS is awesome when played on your tv.
bangsters said:
Hi. I put my phone back to stock since the custom rom I was using (supposedly stock deodexed) was not working with allshare cast dongle.
I want to change roms again that has mobile hotspot (for those with unlimited plan) and still get it working with the allshare cast. NFS is awesome when played on your tv.
Click to expand...
Click to collapse
Most of them won't as they trip the flash counter, but you can always use Triangle Away to reset that. From personal experience, I've gotten mine to work on stock and DADr8's hybrid rom after flashing Triangle Away. Sadly I am seeing mixed results from other ppl not having the same luck as me so I would experiment and see what you can find. I've provided links to both the rom and program I use. Best of luck.
Rom
http://forum.xda-developers.com/showthread.php?t=2002960
Triangle Away
https://play.google.com/store/apps/...SwyLDEsImV1LmNoYWluZmlyZS50cmlhbmdsZWF3YXkiXQ..
db4d1988 said:
Most of them won't as they trip the flash counter, but you can always use Triangle Away to reset that. From personal experience, I've gotten mine to work on stock and DADr8's hybrid rom after flashing Triangle Away. Sadly I am seeing mixed results from other ppl not having the same luck as me so I would experiment and see what you can find. I've provided links to both the rom and program I use. Best of luck.
Rom
http://forum.xda-developers.com/showthread.php?t=2002960
Triangle Away
https://play.google.com/store/apps/...SwyLDEsImV1LmNoYWluZmlyZS50cmlhbmdsZWF3YXkiXQ..
Click to expand...
Click to collapse
has anyone found a fix or a list of tested custom roms that the allshare cast work on? Thanks.
Been trying to figure it out in jedi 12. Can't figure it out yet though.
I was under the impression that it was the custom recovery that caused problems. Completely stock works perfectly but once I injected root I have to flash triangle away. I know when I used Frosty JB it would work but I had to flash triangle away before I used it each and every time.
The biggest problem finding out where the trouble lies is in just trying to get that first connection to begin with. I'm sure a lot of people are having trouble just establishing a connection in the first place!
Any of the N7105 or custom roms with Tmobile modem and kernel plus stock recovery and the flash counter has to be zero.
1. flash the newest N7105 rom from development section via CWM or TWRP.
2. using MOBILE ODIN PRO App flash Tmobile Kernel, Recovery and Modem then phone is gonna reboot, Put your phone into download mode and see you flash counter, if it is Zero you are good to go if your flash counter 1 or 2 or 3 then boot back to your phone use Triangle away app to clear your phone counter back to zero and then the Allshare Cast will work for you.
if you want to try a different rom then you are gonna have to flash custom recovery again using mobile odin....
Yeah I really hope the custom ROM's manage to figure this out soon. I hate being on stock just to use my Allshare cast dongle with my T.V. and car stereo.
allshare dongle working with rooted s4
Mine works fine rooted. I had to use the pin connection method which was not listed anywhere in the booklet I got. When your phone sees the dongle long press on it, hit pin connection, an 8 digit pin will come up on your tv when it is set to the correct input for the dongle. You have 10 seconds to enter pin on phone and that is what finally connected my rooted s4 to dongle. Running Clean Rom 1.6.5. Now my question,
does anyone know of a rom that includes allshare cast for the galaxy tab 2? I want to use it with my dongle as well but it has no allshate cast or screen mirroring in it right now. Hoping it is possible. Thanks,
babydollnyroch said:
Mine works fine rooted. I had to use the pin connection method which was not listed anywhere in the booklet I got. When your phone sees the dongle long press on it, hit pin connection, an 8 digit pin will come up on your tv when it is set to the correct input for the dongle. You have 10 seconds to enter pin on phone and that is what finally connected my rooted s4 to dongle. Running Clean Rom 1.6.5. Now my question,
does anyone know of a rom that includes allshare cast for the galaxy tab 2? I want to use it with my dongle as well but it has no allshate cast or screen mirroring in it right now. Hoping it is possible. Thanks,
Click to expand...
Click to collapse
What an I supposed to long press? I tried this to no avail. Are you using an s4 or note 2?
Sent from my SGH-T889 using xda app-developers app
double1 said:
What an I supposed to long press? I tried this to no avail. Are you using an s4 or note 2?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
The reset button.
Also, anyone know exactly what that update today did?

[Q] hbo go screen mirroring

Hey I was wondering if you could screen mirror or wifi direct to your smart tv. I know after you root your phone the option no longer works, but does aosp or aokp or any google based roms allow you to do this? If I wanted these options back can I just use stock kernel to get this to work?
Aoe316 said:
Hey I was wondering if you could screen mirror or wifi direct to your smart tv. I know after you root your phone the option no longer works, but does aosp or aokp or any google based roms allow you to do this? If I wanted these options back can I just use stock kernel to get this to work?
Click to expand...
Click to collapse
Just throwing this out there....the Samsung MHL adapter works great for me on my rooted S4. It's not wireless, but still.
I wouldn't think that rooting alone would stop those services from working though. ?
Pinan said:
Just throwing this out there....the Samsung MHL adapter works great for me on my rooted S4. It's not wireless, but still.
I wouldn't think that rooting alone would stop those services from working though. ?
Click to expand...
Click to collapse
With the adapter you still get the message screen mirroring not allowed. At least with xfinity player. Hbo works fine with it.
Sent from my SGH-M919 using xda app-developers app
tylerholbrook said:
With the adapter you still get the message screen mirroring not allowed.
Click to expand...
Click to collapse
As I stated, it works fine for me, though I don't use xfinity player.

Screen Mirroring Rooted GS4

Does anyone know if a gs4 is rooted does screen mirroring stop working.. It connects then it turns off immediately.. I am using Darthstalker X for Tmobile.. Any fixes or maybe use another Rom.. No one seems to talk about it on these forms.. Searched like crazy...Using 4.3 mk2..Thanks any help would be appreciated...
I've tried to get people to talk about it but nobody seems to care. My s3 use to work when rooted and while tethering but not the s4. It sucks big time! The s4 will work when you are connected to WiFi but not if you use your mobile data. Allshare seems to automatically turn WiFi on when you tether so it turns off when you try to mirror your screen.
Sent from my SGH-M919 using xda app-developers app
Tried connecting to smart Samsung tv.. It says connected then screen mirroring turns itself off and you lose the connection.. Im surprised no one cares about this since its a really awesome feature.. If you lose it on a rooted device its a major handicap.. Hopefully someone out there can explain this to us...
robster71 said:
Tried connecting to smart Samsung tv.. It says connected then screen mirroring turns itself off and you lose the connection.. Im surprised no one cares about this since its a really awesome feature.. If you lose it on a rooted device its a major handicap.. Hopefully someone out there can explain this to us...
Click to expand...
Click to collapse
Have you tried using a stock rooted rom? The problem may be that the dev "debloated" this feature as most do not use it. I would make a nandroid and flash a stock rooted full bloat rom or just odin back to stock and root it, do not flash a rom. Then test this feature out. From there you can decide to figure out what files are missing or ask the dev to either include it in his next release or make a flashable zip that will add the necessary files back in.
Thanks sounds like a good Idea.. Will ask the the Dev on darthstalker x1, but I don't think I have enough posts yet..lol.. Thanks

[Q] Has anyone got FoxFi hotspot running on AT&T Note 2 after 4.3 update?

I see various devices on various carriers have had problems with the wifi hotspot on FoxFi after the 4.3 OTA update, and while some people have been able to get around the problem, I don't see that anyone has with the AT&T Note 2.
I've tried the trick of pressing the home button when the dialog box pops up saying "Mobile hotspot is unavailable ... To enable mobile hotspot on this device, go to att.com/mywireless or dial 611" and then opening FoxFi again. FoxFi shows the hotspot is active, but no device can see it.
I actually had PDANet installed (fully paid), and it showed that the FoxFi component was version 2.10. I uninstalled PDANet and reinstalled version 2.13.1 of FoxFi (not sure what the difference is between the PDANet and FoxFi versions of the app). Same problem.
The only other possible solution I've run across involved the Note 3 on Verizon -- accepting a new VPN certificate or forcing FoxFi to offer a new one up by getting rid of the existing one. But FoxFi has never offered me a certificate, and I don't see any old one (or any for that matter) in Settings > Security > Trusted Credentials > User.
Has anyone whose Note 2 is not rooted been able to get FoxFi functioning after updating to 4.3?
Alrighty! The thus far deafening silence leads inexorably to this query then: does anyone have FoxFi running on a rooted AT&T Note 2 and is also paired with a Galaxy Gear?
I opted for stock OTA 4.3 with my Note 2 primarily because of the Gear, but the FoxFi problem on 4.3 has proven to be a double-whammy -- not only have I lost the hotspot after taking 4.3 OTA, but I also can no longer Bluetooth tether -- which means I can't get a direct Internet connection to the Gear (and do all those things that the limited, stock Gear connection to one's phone cannot do).
Somebody... anybody? I'm at an airport right now using the abominable Boingo $5 for 24 hours of 2.8 Mbps d/l speed service on my tab. The hotel I stayed at had its wifi go down for 2 hours yesterday afternoon. I would root and find a way, but I don't want to have to mess (read: spend time) with the can of worms that would open with pairing my Galaxy Gear....
Sent from my Nexus 10 using Tapatalk
JasW said:
Somebody... anybody? I'm at an airport right now using the abominable Boingo $5 for 24 hours of 2.8 Mbps d/l speed service on my tab. The hotel I stayed at had its wifi go down for 2 hours yesterday afternoon. I would root and find a way, but I don't want to have to mess (read: spend time) with the can of worms that would open with pairing my Galaxy Gear....
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
I just PM'd you a solution. but you need to be rooted.
Same issue
I have the exact problem At&t and the note 2. Hopefully a work around is developed soon
dicksteele said:
I just PM'd you a solution. but you need to be rooted.
Click to expand...
Click to collapse
Why PM? Can you please post this publicly? I have the same problem. Thanks!
Most custom ROMs have it built it.
I don't know about cocheci, but as I indicated above, I'd need a custom ROM that also works with the Gear without problem. From what I've gleaned from its thread, the Sky Note Air 4.3 ROM may well fit that bill. I just have to find an empty space in my schedule for the potential time sink. (Got a wife and young kids and a more than full time job, so long gone are the days when I could spend all night dikking around with tech toys.)
JasW said:
I don't know about cocheci, but as I indicated above, I'd need a custom ROM that also works with the Gear without problem. From what I've gleaned from its thread, the Sky Note Air 4.3 ROM may well fit that bill. I just have to find an empty space in my schedule for the potential time sink. (Got a wife and young kids and a more than full time job, so long gone are the days when I could spend all night dikking around with tech toys.)
Click to expand...
Click to collapse
Sky note is an awesome ROM. Latest version is G2 I believe. It also comes with out the NOTE 3 stuff in the vanilla flavor. Very lickable. I mean likable.
Not much dikking required.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

Categories

Resources