Develop Bugs

[Q] MTP Driver failed to install

Hello
I have a rooted note 2 and the mtp drivers wont install, anyone else have this problem?

tyfting said:
Hello
I have a rooted note 2 and the mtp drivers wont install, anyone else have this problem?
Click to expand...
Click to collapse
Reinstall the drivers again in Kies, reboot the pc and try again mate. Or install these driver`s https://www.dropbox.com/s/qvvtkwaqc6uqt4p/SAMSUNG_USB_Driver_for_Mobile_Phones.exe and reboot.

How about for mac? Its no working with the android file transfer i have to put my sdcard out everytime i want to transfer big files
Envoyé depuis mon GT-N7100 avec Tapatalk

Done that but still not working.

tyfting said:
Done that but still not working.
Click to expand...
Click to collapse
Well appearently they are not quite installed correctly, or it would work I would uninstall all the drivers and Kies if you have it installed, reboot and connect your phone and force Windows to install the drivers.

Still fails

i know what we have to do to get mtp drivers working

And that is? factory reset phone?

Remove files wpdmtp.inf and wpdmtp.PNF from the folder Windows/inf/ make sure u do a backup
If this works dont forget to press thanks

Still not working

im having the same issues here

Me too...Installation of MTP failed...
I have tried almost everything.And i said ''almost'' cause the answer is somewhere around...
So, i used fresh kies installation - failed
I unistalled Kies and drivers, reboot, install only drivers - failed
I unistalled drivers, reboot, connect my phone to find MTP auto - failed
I reinstall all previous for 2nd time - failed
I install microsoft MTP drivers - failed
I tried in all usb ports in my PC - failed
I tried previous samsung drivers - failed
The last solution is to format PC but i want to avoid this if its possible...
If someone google the problem can find lot of people with this but not a clearly answer.We are not alone in this universe!!!
If someone, master of windows 7 (64) can help, will be my hero!!!!!!!

I ended up factory restoring my phone and the it finally works, sad but true it seems to be the only fix.

tyfting said:
I ended up factory restoring my phone and the it finally works, sad but true it seems to be the only fix.
Click to expand...
Click to collapse
Oh man ... I had MTP working flawlessly yesterday ... but today I can't get it to work. Bone stock SGH-i317 (the AT&T version of the Galaxy Note 2)
In Windows Device manager:
MTP USB Device:
"This device cannot start. (Code 10)"
Just using stock Windows 7 x64 bit drivers -- had no Samsung software installed at all. And then on the phone sometimes after unplugging from the phone "MTP" force closes on the phone. Maybe if I clear Media Storage on the phone.... clearly this is a phone issue and not something on my PC>
---------- Post added at 03:24 PM ---------- Previous post was at 03:23 PM ----------
Yes, that worked. Go to Settings -> Application -> All and find "Media Storage."
Then hit clear data. MTP will work again.
You will need to rebuild the database, which will happen automatically. May take a while depending on how much stuff you have on the phone. There are tools on the Play store to help you look at the status of this process.

I had this problem from day 1. And no matter what I do I couldnt get it to work, I think I tried every solutions on the net already. I reinstall windows and been working since. Of course that's the last resource if you cant get it to work.

Make sure you haven't froze the "mtp application"in titanium or a similar program.
I couldn't get my note connected to my PC until I unfroze that app.
Sent from my Galaxy Note 2 using Tapatalk 2

I am having this issue with all drives, I have windows 8 MTP and PTP both won't work. My computer at home and work get the exact same issue.

eliashadow said:
Me too...Installation of MTP failed...
I have tried almost everything.And i said ''almost'' cause the answer is somewhere around...
So, i used fresh kies installation - failed
I unistalled Kies and drivers, reboot, install only drivers - failed
I unistalled drivers, reboot, connect my phone to find MTP auto - failed
I reinstall all previous for 2nd time - failed
I install microsoft MTP drivers - failed
I tried in all usb ports in my PC - failed
I tried previous samsung drivers - failed
The last solution is to format PC but i want to avoid this if its possible...
If someone google the problem can find lot of people with this but not a clearly answer.We are not alone in this universe!!!
If someone, master of windows 7 (64) can help, will be my hero!!!!!!!
Click to expand...
Click to collapse
Try restarting your phone. I had the same issues with my Galaxy Note, Galaxy Tab 10.1, and Galaxy Note II. It should work. It did for me

mentalcase87 said:
I am having this issue with all drives, I have windows 8 MTP and PTP both won't work. My computer at home and work get the exact same issue.
Click to expand...
Click to collapse
Don't factory default your phone.
Like in my post above, just go to Applications -> All and select 'Media Storage' ... Hit clear data. Problem solved.
I just had this happen again -- and this fix worked perfectly -- again.

MTP Driver Fails
Same problem here, Stock Rom.
Tried all recommendations above and still mtp fails

Windows doesn't "see" note 2.

Good Evening folks,
I'm posting here after spending the better part of 2 days trying to figure out why this doesn't work.
So, i have the following:
model: GT-N7100
Version: 4.1.1
Build: JRo03C - ALJ1
I run a PC with windows 7 and also have a laptop with windows 8.
Now, initially i only wanted to root my device to install an addblocker on it and get rid of some bloatware. so i went and got samsung note2 toolkit here on XDA. (also tried others)
but no matter how i tried the pc (nor laptop) would see the note 2. it would plug in, it would charge... but windows ignored it otherwise.
i have tried al 8 of my USB ports on the desktop, and all 3 on the laptop. none of them work
3 different USB cables.
re-booted more then times then i can count.
i have manually installed the samsung drivers.
i have tried installing the windows MTP Porting kit
all to no avail.
So before i can even START to root... i need it to to play nice with my machines... anyone have ANY suggestions on what the hell is going on here.

If your main priority is to root then use exynos abuse
Sent From Samsung's Galaxy Note II Using Internet

UtkarshGupta said:
If your main priority is to root then use exynos abuse
Click to expand...
Click to collapse
hi,
Thanks for that! found the APK file and got it on the phone through email and it's rooted, so my mission is accomplished...
but my problem still persists:
why oh why wont windows just play nice with the phone?

Did you install Kies on your PC? That program needs to be open when you connect your phone and then it will install the needed drivers.
Sent from my GT-N7100 using xda app-developers app

el_roy1985 said:
Did you install Kies on your PC? That program needs to be open when you connect your phone and then it will install the needed drivers.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Or install the drivers using the Note Toolkit http://forum.xda-developers.com/showthread.php?t=1923956

Does it show as an unknown device in windows under device manager?
I'm having the same issue but I have a suspicion that its the USB port on the phone itself as my gnex can use the same cable/USB port and show up as mtp.
Sent from my GNote 2 using xda premium

my windows is same

My Note 2 N7100 is 'seen' by my windows 8 machine, but it doesnt seem to copy/ paste anything. Pops up with an error. The same happens on a Mac Lion machine. Installed the Android File Transfer app, but the moment I connect my phone, it pops up a message saying please restart your device so that it can be detected. I am tired of transferring individual files over AirDroid Any help?

anirudh412 said:
My Note 2 N7100 is 'seen' by my windows 8 machine, but it doesnt seem to copy/ paste anything. Pops up with an error. The same happens on a Mac Lion machine. Installed the Android File Transfer app, but the moment I connect my phone, it pops up a message saying please restart your device so that it can be detected. I am tired of transferring individual files over AirDroid Any help?
Click to expand...
Click to collapse
What's the error message?

Happened to me before, un install kies on your pc reboot, download from Samsung website and install again, should work
Sent from my GT-N7100 using xda app-developers app

first of all I forgot to mention that this should've been posted in Q&A section
for the problem try the following steps. after each one of them try connecting again. keep net disconnected while you follow the steps.
if it starts working then stop other wise continue.
1)use a diff comp, but you already did that , use a different cable, you didn't mention it
2)try uninstalling drivers via programs and features.
3)try installing drivers - preferably via mskip's toolkit
if you have windows 7, then directly install it
if you have windows 8, then first disable driver signature enforcement via this guide's last question.
4)try re installing windows. if you don't wanna do that then
open device manager
in view -> show hidden devices
delete each one that says samsung, note ii or note 2, android, google, adb, gt-n7100, n7100
this will ensure that you truly remove drivers
follow step 3) after this.
Hope I helped

All the usual and helpful ideas have been listed and you should definitely work thru those to make sure you are not missing something obvious but critical. I also use Win8 (64) and all was well with my Note2 showing up as an MTP device and wll working then one day, seemingly spontaneously, it suddenly didnt! When I would plug my Note2 in, Windows would give me a USB error telling me it could nto recognise the device! To cut a long story short, I tried my wife's S2 and IT appered fine as an MTP device happily enough, so that ruled out the cable, the port and the computer/OS.
I then tried my Note2 on my laptop, and once again it came up as USB error, so the problem was following the DEVICE around....
After a lot of googling, I tried on thing that fixed it instantly:
On the phone, go into Settings, Security and delete all the "Device Administrators" which in my case was just my Email app. That did delete my email account from my phone (contacts, email etc) but didnt matter as phone is just a dumb client to the mail server so no loss of any real data.
Once removed, I then plugged phone in and BOOM! MTP device happily appeared! I then went back in and just re-added my email account and re-activated Device Administrator when asked. Working ever since.
Not saying this is your problem, but it was an eye opener to me that the Device Administrator could 'lock out' the USB connection of the device....
Hope this helps.

APK
Temko Firewing said:
hi,
Thanks for that! found the APK file and got it on the phone through email and it's rooted, so my mission is accomplished...
but my problem still persists:
why oh why wont windows just play nice with the phone?
Click to expand...
Click to collapse
Did the APK file automatically root your note2?

Arikara said:
Did the APK file automatically root your note2?
Click to expand...
Click to collapse
Yup it do
Sent from my GT-N7100 using xda premium

i have problem in xp .it doesnot install driver properly but gud in win 7.first uninstall all drivers then installed drivers without connecting phone.when instal done then connect phone

nabilsweet007 said:
i have problem in xp .it doesnot install driver properly but gud in win 7.first uninstall all drivers then installed drivers without connecting phone.when instal done then connect phone
Click to expand...
Click to collapse
I would also recommend checking your Windows Update log - especially if you have it set to automatic updates. After I installed the drivers off of the Samsung website, Windows Update tried to "Update" my drivers to an older version (I do manual Windows Updates). The first time it asked, I let it, and my phone couldn't connect anymore. Once I stopped that silliness I stopped having problems.

same problem usb not conecting with my pc windows7
all this is my same problem which I facing help me about how to slove this matter
Temko Firewing said:
Good Evening folks,
I'm posting here after spending the better part of 2 days trying to figure out why this doesn't work.
So, i have the following:
model: GT-N7100
Version: 4.1.1
Build: JRo03C - ALJ1
I run a PC with windows 7 and also have a laptop with windows 8.
Now, initially i only wanted to root my device to install an addblocker on it and get rid of some bloatware. so i went and got samsung note2 toolkit here on XDA. (also tried others)
but no matter how i tried the pc (nor laptop) would see the note 2. it would plug in, it would charge... but windows ignored it otherwise.
i have tried al 8 of my USB ports on the desktop, and all 3 on the laptop. none of them work
3 different USB cables.
re-booted more then times then i can count.
i have manually installed the samsung drivers.
i have tried installing the windows MTP Porting kit
all to no avail.
So before i can even START to root... i need it to to play nice with my machines... anyone have ANY suggestions on what the hell is going on here.
Click to expand...
Click to collapse

I was having the same problem, but I was using a USB cord that I had from my old phone. Switched to the white one that came with my Note 2 and it started working.

Having problems with connecting phone to computer

Whenever I connect my phone to the computer to put music on it i get a error message saying "Hardware Id Missing Windows cannot identify the device plugged into the SAMSUNG Mobile USB Composite Device." Is there any way to fix this?

I believe, if you are on Windows, you can search for and download the Samsung drivers for your phone. You will have to choose 32 or 64 bit. Then it should show up as an extra storage device under the my computer program

Download kies, it will install the Samsung drivers. After installation connect your phone and let it connect. It'll take about 5 minutes then you'll be good to go.
Sent from my SAMSUNG-SGH-I317 using xda premium

Still wish there was a Mac solution. Couldn't get my S3 to connect and neither my Note 2. I'm stuck using Windowz whenever I want to file transfer. .
And yes I've tried absolutely everything, but install Parallels on my Mac lol
Sent from my SGH-I317 using xda app-developers app

Unknown Device on any PC

Hi all,
I have a problem that i can't work out
I tired connecting my note to any pc but it just doesn't recognize it
I tried windows xp 7 and 8
Desktop and laptop
Tried changing the cables
Tried lots of different drivers and different usb ports 2 and 3
Just Don't know what to do
Pleaseeeee helllllpppp
Sent from my GT-N7100 using xda app-developers app

MaorHassan said:
Hi all,
I have a problem that i can't work out
I tired connecting my note to any pc but it just doesn't recognize it
I tried windows xp 7 and 8
Desktop and laptop
Tried changing the cables
Tried lots of different drivers and different usb ports 2 and 3
Just Don't know what to do
Pleaseeeee helllllpppp
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Check whether you've firs installed Samsung USB Drivers in computer. Install KIES and it'll automatically install the drivers.
Also check the USB Debugging mode is not checked in your phone. It'll be there in Developer Options

adb non detect.
Yeah. I am having similar problem. Pc wont detect my phone even when usb debugging is on or off. Installed all necessary drivers and still wont detect. In fact my note 8.0 having the same problem. It was ok a few days back. Is it the phone or pc that is causing the problem? Note 2 was derooted and 8.0 original fw. Can anyone help?

yes i have the same issue as well
i have no idea why

Try to do everything from the begining. Uninstall all previous drivers that you have installed. Restart your computer. You could download and install Samsung drivers pack only if you don't use Kies (search on Google for the latest pack) or download and install latest Samsung Kies suite and install drivers that come with it. After that connect your phone to the PC using your USB cable. When it starts to search for drivers open that notification and you will see something like >> Skip obtaining drivers from internet<< Then it will automaticaly install drivers from PC (the one that you have installated previously) or it will prompt you to point to the folder where drivers were instalated. I can't remember exactly how it goes but this is the solution that worked for me...And you must click on skip for every single item (on driver list) or it will not be instalated properly...
Sent from my GT-N7100

i just connected now the phone to a brand new windows 7 installation that has no drivers at all
after 2 seconds i get USB DEVICE not recognize and thats it from there i cannot do anything

MaorHassan said:
i just connected now the phone to a brand new windows 7 installation that has no drivers at all
after 2 seconds i get USB DEVICE not recognize and thats it from there i cannot do anything
Click to expand...
Click to collapse
Install drivers first and than follow all the steps that I have mentioned in the post before...
Sent from my GT-N7100

I have it 2 just connect a couple times on the same port and then he connects by me
Sent from my GT-N7100 using xda app-developers app

No, it's useless to reinstall driver, just buy a new usb sync/charge cable, that works for me.
Sent from my GT-N7100 using xda app-developers app

i tried 10 cables

i tried installing new drivers on a fresh windows installation
and connect the device but after 2 seconds i get unknown device and red X and thats it
i just dont understand what else can i do to solve this issue its driving me CRAZY!!!!

[Q] i9250 brick with a twist

Hello, I have a bricked i9250, no matter which button combination i use it doesnt boot up, just stays dark whole time.
It was bricked some years ago by a flashing mistake and now I decide to try and unbrick it.
I read the many threads here and stumbled upon tuna omap flasher, and here is the twist, my computer cant recognize the phone as it was never plugged in this computer (win 8.1 64bit btw) while the phone was still ok, and i dont have drivers for the phone installed, i mean, i have samsung drivers installed that come with kies, but every time i connect the phone without battery to the pc i get a message that the last connected usb device has malfunctioned and windows doesnt recognize it. I did install the omap 4460 driver under device manager -> add legacy driver from the tuna omap flasher package, but i still get the same message everytime i connect the phone to pc.
Does any have the omap 4440 driver maybe that other people speak of in other similar threads?
PS in this thread htt p:// forum.xda-developers.com/galaxy-nexus/development/guide-unbrick-guide-galaxy-nexus-maguro-t2146790 ath the 3rd step, when i double click adb-windows and fastboot-windows, are these two cmd windows supposed to stay open or run some stuff and then immediatelly close?

n7100xda said:
Hello, I have a bricked i9250, no matter which button combination i use it doesnt boot up, just stays dark whole time.
It was bricked some years ago by a flashing mistake and now I decide to try and unbrick it.
I read the many threads here and stumbled upon tuna omap flasher, and here is the twist, my computer cant recognize the phone as it was never plugged in this computer (win 8.1 64bit btw) while the phone was still ok, and i dont have drivers for the phone installed, i mean, i have samsung drivers installed that come with kies, but every time i connect the phone without battery to the pc i get a message that the last connected usb device has malfunctioned and windows doesnt recognize it. I did install the omap 4460 driver under device manager -> add legacy driver from the tuna omap flasher package, but i still get the same message everytime i connect the phone to pc.
Does any have the omap 4440 driver maybe that other people speak of in other similar threads?
PS in this thread htt p:// forum.xda-developers.com/galaxy-nexus/development/guide-unbrick-guide-galaxy-nexus-maguro-t2146790 ath the 3rd step, when i double click adb-windows and fastboot-windows, are these two cmd windows supposed to stay open or run some stuff and then immediatelly close?
Click to expand...
Click to collapse
Start with disabling driver signature enforcement, dunno if it's related but it's quite a hassle on win 8
Sent from my GT-I9100 using XDA Free mobile app
---------- Post added at 02:47 PM ---------- Previous post was at 02:45 PM ----------
totalnoob34 said:
Start with disabling driver signature enforcement, dunno if it's related but it's quite a hassle on win 8.
Also,try a jig to try to boot the thing in download mode
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA Free mobile app

HI

totalnoob34 said:
Start with disabling driver signature enforcement, dunno if it's related but it's quite a hassle on win 8
Sent from my GT-I9100 using XDA Free mobile app
---------- Post added at 02:47 PM ---------- Previous post was at 02:45 PM ----------
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
HI, I did disable the driver enforcement, and i did try jig, no response :/
however, I have new information, my friend whose phone this is and bricked it in 1st place said that at first his computer did recognize the phone as it was connecting and disconnecting the phone every few sec, and he didnt know better and made a usb jig, and after jiging the phone, the computer didnt recognize the device anymore, any ideas what this could mean?

n7100xda said:
HI, I did disable the driver enforcement, and i did try jig, no response :/
however, I have new information, my friend whose phone this is and bricked it in 1st place said that at first his computer did recognize the phone as it was connecting and disconnecting the phone every few sec, and he didnt know better and made a usb jig, and after jiging the phone, the computer didnt recognize the device anymore, any ideas what this could mean?
Click to expand...
Click to collapse
Nope, no idea.. Try following the process with the battery disconnected and plugging it in after connecting the USB cable
These are just general pieces of advice, I have no clue on how does the tool actually works in the first place