Develop Bugs

ROM manager don't want to start new ROM

THIS POST IS COPY/PASTE FROM "DESIRE ANDROID DEVELOPMENT"...I THINK THIS IS RIGHT PLACE FOR THIS POST PERHAPS...
Hi there got some problems with ROM manager (latest version from Market)...
I put new LeeDroid on my SD card and when start ROM manager goes to "Install rom from sd card" RM asked me for directory and I "tell" him where the ROM is...when I tap on LeeDroid (.zip) ask me for ROM Pre-installation and I tick both options - OK - press Reboot into Clockwork Recovery and continue the installation. I press OK and nothing happened then
Then tried with untick both options - same thing...
Then I try Reboot into Recovery options and nothing happened again
Then download CyanogenMod 6.1.1. from ROM manager - same thing...nothing happened
But when I Reboot into Recovery mod (Hot reboot app) reboot was successfull and I was making System backup....
What is going wrong there
Please help me
Clockwork mode is 2.5.0.7.
P.S.
Sorry if my english is poor

If the ROM Manager is giving you problems, just install your ROM from the recovery menu

Ok...I'll try now
It's going on......and finished
What now?? Nothing happened after that....I have to put the battery out or what?
I was put the battery out and then start device...i'm in AlphaRev Recovery now and when press "Reboot system now" nothing happened??

You mean you have installed Leedroid from your SD card in Recovery?
Once successfully installed, you don't need to pull out your battery, you just need to find the option in your recovery to restart OR boot up your system.

eden2812 said:
You mean you have installed Leedroid from your SD card in Recovery?
Once successfully installed, you don't need to pull out your battery, you just need to find the option in your recovery to restart OR boot up your system.
Click to expand...
Click to collapse
Was but nothig happened just black empty screen is there and when i press power button show me menu for reboot...
I'll try to do it again (install from .zip)
Ok....now here's some options...
apply sdcard:update.zip
choose .zip from card
toggle signature verification
toggle script asserts
What have to do now?? I pressed APPLY UPDATE FROM SD CARD and said:
Finding update package...
Opening update package...
Installing update... and below is everything the same like when was installing Ledroid..
What now?? There's no any menu....
I put back Recovery from Nand backup and press "reboot system now" but there is just black screen on device and nothin' happened..
PLEASE HELP ANYONE!
Finally
Reboot to fastbot was my option and then reboot

you should be selecting [choose .zip from card], then navigate to whatever you named your Leedroid zip.
After this installs and completes, select the option to reboot system, and you're good to go.

eden2812 said:
you should be selecting [choose .zip from card], then navigate to whatever you named your Leedroid zip.
After this installs and completes, select the option to reboot system, and you're good to go.
Click to expand...
Click to collapse
I know that but after flashing LeeDroid need to go tu option Reboot to fastboot and then Reboot device
I wrote it in a post above
But thanks

Got new problem now...unbelivable...
Put LeeDriod on the device and don't like it....and want to back to my stock 2.2 backup...
But when in Recovery mod put Restore...said MD5 mismatch...and try again but now said: E: failed to seek in /cache/update.zip (invalid argument)
E: signature verification failed
Installation aborted
But how?? I was recover once today successfully...what's goin' wrong?

md5 mismatch could mean that the recovery is corrupted?
try turning signature verification off in your recovery to try to fix your signature verification failed problem.
OR try this http://forum.xda-developers.com/showthread.php?t=714114
But I have to ask, when you did you make that backup of that stock 2.2?

eden2812 said:
md5 mismatch could mean that the recovery is corrupted?
try turning signature verification off in your recovery to try to fix your signature verification failed problem.
OR try this http://forum.xda-developers.com/showthread.php?t=714114
Click to expand...
Click to collapse
Thanks for this link
eden2812 said:
But I have to ask, when you did you make that backup of that stock 2.2?
Click to expand...
Click to collapse
I don't really understand what you asked me
I found on xda forum 2.2 stock ROM (rooted) and put it on my phone and fixed all my problems

I recently installed LeeDroId using CWR.
Steps i followed >
1. Download LeeDroId onto SD card.
2. Boot into Recovery
3. BACKUP EXISTING ROM
4. Wipe old rom
5. Install LeeDroId, by navigating to the zip file
6. Reboot once installed
7. WAIT. 1st boot takes about 4 mins.
Done
That worked for me.

Install Custom ROM failed, show ANDROID only.

Erm, i just get mine HTC One X, but unfortunately i think i root fail, and ... install a custom ROM without backup previous official ROM, now my phone is DEAD Cannot be boot, just show the ANDROID on the screen ... help me T.T, sorry for my BAD EnGlIsh

You killed it! Whyyyyyy?

I think you will find an answer here: http://forum.xda-developers.com/showthread.php?t=1609190

Please help
when i tried to install custom rom on my galaxy y gt s5360 it failed .
i can't mount sd-ex and when i install zip in show INSTALLATION aborted what i do now?
i follow these steps:
Installation Instructions:-
Power off your galaxy Y and wait till it vibrates.
After it vibrates boot it in the recovery mode by pressing the three button combination (volume up + home + power button)
Then go to apply update from sd card and then choose CWM Recovery.zip
Now to select install zip from sd card>choose zip from sd card>kernel Bangprovn#1.zip
Wait till the installation completes and then go to advanced and then select reboot recovery.
Now it would boot in CWM Recovery v6.0.49 and would show a number of errors. No need to worry
Go to mounts and storage and format system, data and cache
Now mount all partitions (system, data, cache, storage/sd card and sd-ext)
Press the back button and select install zip>choose zip from storage/sd card
Choose cm-11-20140719-unofficial-totoro.zip
here it show error message:crying:
plz help thanx in advance

mr.rparmar said:
when i tried to install custom rom on my galaxy y gt s5360 it failed .
i can't mount sd-ex and when i install zip in show INSTALLATION aborted what i do now?
i follow these steps:
Installation Instructions:-
Power off your galaxy Y and wait till it vibrates.
After it vibrates boot it in the recovery mode by pressing the three button combination (volume up + home + power button)
Then go to apply update from sd card and then choose CWM Recovery.zip
Now to select install zip from sd card>choose zip from sd card>kernel Bangprovn#1.zip
Wait till the installation completes and then go to advanced and then select reboot recovery.
Now it would boot in CWM Recovery v6.0.49 and would show a number of errors. No need to worry
Go to mounts and storage and format system, data and cache
Now mount all partitions (system, data, cache, storage/sd card and sd-ext)
Press the back button and select install zip>choose zip from storage/sd card
Choose cm-11-20140719-unofficial-totoro.zip
here it show error message:crying:
plz help thanx in advance
Click to expand...
Click to collapse
1st this thread is almost 3 years old
2nd this the HTC One x forum, go to the galaxy Y forum !!

[Q] Which Clockworkmod to Install?

On the sticky thread there is a link for cwm thread, however I'm not quite sure which filesystem to choose, I'm going to install through recovery, seems safer for me. I want to install cwm for 2 purposes, first I'm planning to backup my stock rom so that I can always flash it back if I need my warranty and second I'm planning to flash cm9 to my phone. I'm not quite sure what is the diffrence between rfs and ext4 is Currently I'm on 2.2.1 stock rom.

Actually I found the proper version of CWM to install here http://forum.xda-developers.com/showthread.php?t=1414173
But I can't apply it, when I enter recovery mode the options I have are:
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe chace parition
Pheraps I should rename the zip file I downloaded to update.zip? I can't select any other zip from the sd card and if I press "apply sdcard:update.zip" it searches for update.zip and fails to find it.

Try to install final cwm 5.0.7
* I'm using now cwm 5.0.6
Sent from my GT-S5660 using Tapatalk 2

samgio said:
Try to install final cwm 5.0.7
* I'm using now cwm 5.0.6
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
But I can't seem to be able to install any cwm through recovery, as I just don't have this option, should I rename the package?

Can anyone help me please? :\

Eden3319 said:
Can anyone help me please? :\
Click to expand...
Click to collapse
''apply update from sdcard''
''apply update.zip''
something like that, and than select the cwm.

U have original recovery??!
If u have it do this steps:
Put the cwm file in (android) folder
1-go to recovery
2-apply update from sd card
3-go to android folder
4-chose the cwm file
5-flash it
6-wait while it finished
7-reboot your phone
I can't help more this is the all steps...it should works
Sent from my GT-S5660 using Tapatalk 2

This is the log I get when I click apply sdcard:update.zip:
-- Install from sdcard...
Finding update package...
Opening update package...
E:Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted.
Because the name of the zip is just not update.zip.

1.first copy the zip to the root of sdcard
rename the zip to update.zip and install as instructed
Press thanks if i helped u
Sent from my GT-S5660 using xda app-developers app

I flashed it but I can't seem to be able to enter to recovery now, power+home buttons just keep me on the samsung logo (not the flashing one, the first one) my phone works but just can't enter to recovery. When I flashed it, it seemed to work, but I don't know why I can't enter

Mates you have to help me!!! I ordered an order to reboot into recovery from rom manager and my device doesn't start now, I know it was stupid but I'm not sure what to do now, I can get it to download mode and to the first samsung logo but not past it

Eden3319 said:
Mates you have to help me!!! I ordered an order to reboot into recovery from rom manager and my device doesn't start now, I know it was stupid but I'm not sure what to do now, I can get it to download mode and to the first samsung logo but not past it
Click to expand...
Click to collapse
First you have to root and format to ext4, before installing CWM.
Download mode, remove battery, insert battery, press power, home, volume down, at the same time.

movfan said:
First you have to root and format to ext4, before installing CWM.
Download mode, remove battery, insert battery, press power, home, volume down, at the same time.
Click to expand...
Click to collapse
I'm still getting into download mode, my problem is that whenever it boots now it trys to get into recovery mode and I don't have recovery mode because applying it didn't work :\ The normal os worked before I clicked that button in rom manager

[CWM][Samsung Galaxy GT-I5510] CWM Touch Recovery

That's it, I present you CWM Based Recovery On-Screen Touch Navigation Controls by Team UtterChaos for our Galaxy 551 :laugh:
I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE BY FLASHING THIS ROM
DOWNLOAD
Code:
You can find it [URL="http://goo.gl/WFr5Q"]HERE[/URL]
Code:
OFFICIAL THREAD [URL="http://forum.xda-developers.com/showthread.php?t=1485829"]HERE[/URL]
Installation
Code:
1. Make sure you have got GingerBread bootloader.
2. Download Odin Multidownloader v4.34 for GT-I5510, Callisto_v1.ops and latest Clockwork Mod Recovery if you do not have them already.
3. Run Odin Multi downloader v4.34 and select the Callisto_v1.ops by clicking OPS button.
4. Select One Package Option and Click One Package button and select the recovery file name (CWM_5.0.2.7_touch_bebek15.tar.md5) file you downloaded.
5. Leave other settings to default (i.e. don’t change any other options/settings)
6. When you are done reboot your phone in download mode (Press Q + Power button to go to download mode)
7. Connect your phone in download mode to your computer via USB Cable.
8. When Odin detects your phone (If you see a com port number written in yellow background at the top left, then your phone is detected. View image.), click Start button.
9. Wait till Odin finishes the job (approx. 5-10 seconds:cool:) and when it reports ‘PASS’, you can disconnect your phone.
Credits
Code:
[B]Team UtterChaos
squadzone
willingmagic
didhiy
yagya
me[/B]
hint: you can't restore nandroid backup from other version of cwm with this.

thanks priyesh103 for this video​

Screenshot of CWM touch recovery
look at here,

Just asking, do we need an "Power Off" option on the recoveries?

sometimes a poweroff option is needed....
Sent from my GT-I5510 using xda premium

odin doesn't detect my phone !!
pls share the drivers for win 7 64 bit

help me !!!
can u provide drivers for win7 64 bit
i need to install cwm but odin doesnt detect my phone
pls give me the exact procedure to insall cwm
edit :successfully installed cwm

please help, wrong flashing this cmw cause my phone firmware is froyo, now I can not get to the download mode, try using a usb jig (with resistor 330k ohm) also can not help...

nasyiinhd said:
please help, wrong flashing this cmw cause my phone firmware is froyo, now I can not get to the download mode, try using a usb jig (with resistor 330k ohm) also can not help...
Click to expand...
Click to collapse
same problem here :crying:, any luck in resurrecting it

CWM errors
Hi,
Thanks for the great instructions! I followed them precisely but as I boot to the recovery mode (power+T) I get the following errors nor any commands work in CWM. I even tried to flash the CWM with ODIN again.
CWM-based recovery v.5.0.2.7
E: Can't mount /cache/recovery/Command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Please note that I had a stock Samsung Galaxy GT-I5510 with Android 2.3.6. So I have not rooted my phone in any way. Should I? How can I do it? Thank you for your support!
P.S. As I will get the CWM Recovery to work I will flash CyanogenMod 10.2.
http://forum.xda-developers.com/showthread.php?t=2438393

qrk said:
Hi,
Thanks for the great instructions! I followed them precisely but as I boot to the recovery mode (power+T) I get the following errors nor any commands work in CWM. I even tried to flash the CWM with ODIN again.
CWM-based recovery v.5.0.2.7
E: Can't mount /cache/recovery/Command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Please note that I had a stock Samsung Galaxy GT-I5510 with Android 2.3.6. So I have not rooted my phone in any way. Should I? How can I do it? Thank you for your support!
P.S. As I will get the CWM Recovery to work I will flash CyanogenMod 10.2.
http://forum.xda-developers.com/showthread.php?t=2438393
Click to expand...
Click to collapse
You want to put SD card with CyanogenMod 10.2 and gapps to your phone, then choose option install wipe data/factory reset, install zip from SD card and choose .zip file containing CyanogenMod 10.2, and then install gapps and restart the phone.

Phone doesn't reboot
Hi,
I hope anybody reads this.
I downloaded the .tar.md5 files and proceeded with the instructions.
Though Odin tells me that it's flashing the telephone this is the last message of the log "<1> Close serial port and wait until rebooting."
And nothing happens afterwards. I can only see that the phone switches on again, but the screen stays dark.
Can you help me with anything? I already spent hours because i just tried to get a custom recovery on the phone because I couldn't install CyanogenMod from the SD card.

H4NNE5 said:
Hi,
I hope anybody reads this.
I downloaded the .tar.md5 files and proceeded with the instructions.
Though Odin tells me that it's flashing the telephone this is the last message of the log "<1> Close serial port and wait until rebooting."
And nothing happens afterwards. I can only see that the phone switches on again, but the screen stays dark.
Can you help me with anything? I already spent hours because i just tried to get a custom recovery on the phone because I couldn't install CyanogenMod from the SD card.
Click to expand...
Click to collapse
Which version of odin are you using?

Hi,
It's 4.43
I also started it as administrator and tried different USB-Ports.
What does the .ops file contain? Some register adresses?

H4NNE5 said:
Hi,
It's 4.43
I also started it as administrator and tried different USB-Ports.
What does the .ops file contain? Some register adresses?
Click to expand...
Click to collapse
Try odin 4.34.
.ops file contains partition table of your phone.

So first I flashed the stock firmware back again to be safe that at least it's still working. That was successful.
Ok I forgot to install the GB bootloader, I didn't mention this. But from the links of the first page none is working anymore.
Can you provide me one?
Also now I can't get into the stock recovery anymore with "T + Power".

H4NNE5 said:
So first I flashed the stock firmware back again to be safe that at least it's still working. That was successful.
Ok I forgot to install the GB bootloader, I didn't mention this. But from the links of the first page none is working anymore.
Can you provide me one?
Also now I can't get into the stock recovery anymore with "T + Power".
Click to expand...
Click to collapse
Cwm and stock

Bootloader

Hi kac321,
Thanks but I need the bootloader. I already have the recovery.

H4NNE5 said:
Hi kac321,
Thanks but I need the bootloader. I already have the recovery.
Click to expand...
Click to collapse
Check post #18

[Q] Help needed, soft bricked i8150 Galaxy Wonder

Hey guys..
May need some help here as I've currently soft bricked my mum's device while trying to update to CM11 (2014-01-05: CM-11.0 20140105-UNOFFICIAL) from CM10 (2013-10-23: CM10 Final Release) for i8150 Samsung Galaxy Wonder. Below are the details how did I bricked it, what I've done and etc. Hope some one could help me.
What have I done to soft bricked it
Tried to update to CM11 from CM10 while still using CWM 6.0.1.2. Flashed CWM 6.0.4.5-ancora after that using ODIN but stuck at bootloop no matter what I do.
View attachment 2495891
What I've done trying to unbricked it
1. Reflashing back to stock rom (ODIN shows FAILED for some reason)
2. Reflashing between CM10 & CM11 (installing gapps for each version as well)
3. Installing different ROM version.
4. Taking the battery out for 1 whole night
5. Wiping delvick, restore factory settings / wupe user data, format data, format cache, format system, wipe cache partition
The situation now
Able to go into recovery & download mode, all buttons working
Not sure if this helps but when I try to charge the phone, the battery will show as below without any charging status. After 2 minutes the phone will be powered on automatically.
View attachment 2495890
Appreciate if someone could look into this for me as I feel really bad bricking my mum's phone leaving her phoneless to work.

Hello
I had the same problem, I reinstalled the Caribe; odin by the previous CWM, my back was v6.0.2.3 and installing the previous ROM and it worked!

Credit to : @arsradu, @keithross39
you can follow this link
http://forum.xda-developers.com/showthread.php?t=1941028
Here is the link for flashable CWM
http://forum.xda-developers.com/showthread.php?t=2510902
Also, if you want to install new ROM, do this step :
Go to CWM
select "wipe data / factory reset"
go to "mounts & storage" and select "format /system". This is extremely important!!
under the same menu, format /sdcard0 (be careful NOT to format /sdcard1 by mistake)
install the ROM (from the external sd)
install Gapps (from the external sd)
reboot your phone

houjiji said:
Hey guys..
May need some help here as I've currently soft bricked my mum's device while trying to update to CM11 (2014-01-05: CM-11.0 20140105-UNOFFICIAL) from CM10 (2013-10-23: CM10 Final Release) for i8150 Samsung Galaxy Wonder. Below are the details how did I bricked it, what I've done and etc. Hope some one could help me.
What have I done to soft bricked it
Tried to update to CM11 from CM10 while still using CWM 6.0.1.2. Flashed CWM 6.0.4.5-ancora after that using ODIN but stuck at bootloop no matter what I do.
View attachment 2495891
What I've done trying to unbricked it
1. Reflashing back to stock rom (ODIN shows FAILED for some reason)
2. Reflashing between CM10 & CM11 (installing gapps for each version as well)
3. Installing different ROM version.
4. Taking the battery out for 1 whole night
5. Wiping delvick, restore factory settings / wupe user data, format data, format cache, format system, wipe cache partition
The situation now
Able to go into recovery & download mode, all buttons working
Not sure if this helps but when I try to charge the phone, the battery will show as below without any charging status. After 2 minutes the phone will be powered on automatically.
View attachment 2495890
Appreciate if someone could look into this for me as I feel really bad bricking my mum's phone leaving her phoneless to work.
Click to expand...
Click to collapse
The important thing with the situation like this is to stay calm first Happens to me once b4, bootloop after reboot by deleting one .apk file and when i flashed stock ROM (5x i think) , i got stuck at samsung logo. Download mode only shoes the icon, no menu's and restarts after a few seconds. What I did, flash CWM 6.0.4.5 via odin. After that, reboot to CWM and did the following: credit to @arsradu
In CWM:
Select "wipe data / factory reset"
Go to "mounts & storage" and select "format /system". This is extremely important!!
Under the same menu, format /sdcard0 (be careful NOT to format /sdcard1 by mistake)
Install the ROM (from the external sd)
Install Gapps (from the external sd)
Reboot phone

dec0der said:
The important thing with the situation like this is to stay calm first Happens to me once b4, bootloop after reboot by deleting one .apk file and when i flashed stock ROM (5x i think) , i got stuck at samsung logo. Download mode only shoes the icon, no menu's and restarts after a few seconds. What I did, flash CWM 6.0.4.5 via odin. After that, reboot to CWM and did the following: credit to @arsradu
In CWM:
Select "wipe data / factory reset"
Go to "mounts & storage" and select "format /system". This is extremely important!!
Under the same menu, format /sdcard0 (be careful NOT to format /sdcard1 by mistake)
Install the ROM (from the external sd)
Install Gapps (from the external sd)
Reboot phone
Click to expand...
Click to collapse
Thanks for the help.
However I've done those that you've mentioned and I'm still stuck at the BootLoop. I've formatted cache, formatted data as well under "mounts & storage". Still no hope. :crying:

What error do you get when you flash stock firmware via odin?

dec0der said:
What error do you get when you flash stock firmware via odin?
Click to expand...
Click to collapse
It just says FAILED after 2 minutes even before it started flashing KERNEL & etc..
I've tried doing it 3-4 times already still same thing happen..

houjiji said:
It just says FAILED after 2 minutes even before it started flashing KERNEL & etc..
I've tried doing it 3-4 times already still same thing happen..
Click to expand...
Click to collapse
flashing kernel via odin?
Here is the link on [HowTo] Flash a firmware with ODIN
Kindly follow every steps strictly. Get needed files below and check md5 first.
Odin Multi Downloader v4.44
MD5 Sum: b8ce68edc61ad822733de676a6644185
Ancora.ops
MD5 Sum: 65831d136621d6d550d2a11a2e8111f3
Galaxy W GT-I8150 Firmware
Note: Do this steps before flashing stock ROM in CWM:
Select "wipe data / factory reset"
Go to "mounts & storage" and select "format /system". This is extremely important!!
Under the same menu, format /sdcard0 (be careful NOT to format /sdcard1 by mistake)
Turn off phone and flash stock kernel

dec0der said:
flashing kernel via odin?
Here is the link on [HowTo] Flash a firmware with ODIN
Kindly follow every steps strictly. Get needed files below and check md5 first.
Odin Multi Downloader v4.44
MD5 Sum: b8ce68edc61ad822733de676a6644185
Ancora.ops
MD5 Sum: 65831d136621d6d550d2a11a2e8111f3
Galaxy W GT-I8150 Firmware
Note: Do this steps before flashing stock ROM in CWM:
Select "wipe data / factory reset"
Go to "mounts & storage" and select "format /system". This is extremely important!!
Under the same menu, format /sdcard0 (be careful NOT to format /sdcard1 by mistake)
Turn off phone and flash stock kernel
Click to expand...
Click to collapse
Thanks.. Will give it a go and see whether this works or not later tonight.. :fingers-crossed:
UPDATE: completed reflashing to stock rom already. But currently no usb ports can detect the phone. Real headache lol~

Could be as simple as trying a different USB cable....they DO wear out / become loose over time. Very common problem over on the S2 forum, and both phones have the same connector.......
This might be my S2, or it might be my W...but it's definitely CM

keithross39 said:
Could be as simple as trying a different USB cable....they DO wear out / become loose over time. Very common problem over on the S2 forum, and both phones have the same connector.......
This might be my S2, or it might be my W...but it's definitely CM
Click to expand...
Click to collapse
I've tried connecting to 3 different PCs running on both Win8 and Win7 with 4 cables, all not working somehow.

Have you disabled firewalls and/or antivirus before connection.....also ended any kies processes in task manager.....
This might be my S2, or it might be my W...but it's definitely CM

keithross39 said:
Have you disabled firewalls and/or antivirus before connection.....also ended any kies processes in task manager.....
This might be my S2, or it might be my W...but it's definitely CM
Click to expand...
Click to collapse
Thanks for your reply. Yes all disabled, luckily I managed to find an old laptop running on Win7 and successfully rolled back to Touchwiz.
Now the phone boots normally but I could not re-flash it to CM10.1 any more, it will get stuck at the bootlop again. :crying: