Related
Hello,
I find things very funny on my phone let me describe. This happens on both opendesire 4.0.25 and defrost 4.9 . I am downloading defrost 4.7 now to see if the problem solves. This is it, my phone clock speed is always at 998MHZ and the CPU usage is always at 100% . I realised that is why my phone always got hot and the battery drains fast. I hope someone could give me a solution, or is it the new kernal that is giving the problems?
Thank you.
On Defrost you can try a different kernel directly from the Defrost setup.
I am now using HAVS 1113and the phone works great and the battery life has increased significally
Thank you for your reply
but that is not the problem. This is, my CPU usage is always at 100% (checked with many apps) also the CPU setting is ondemand which means my usage being at 100%, makes the clockspeed always at 998. The process that took up 76% of the CPU was named android.process.media or something like that. Anyone knows what it means and what I am supposed to do now? How am I to disable the process and what process is that? How can I disable it?
Thank you and I'm hoping for more replys its quite upsetting to have your processor running high all the time
Sounds like a background app is stopping the Desire going into a sleep state...you might have to reset the phone and add 1 app at a time to see what it is...
install Android System Info on your Desire and take a look at the tasks list.
There press the menu button to sort the list by CPU load.
The total CPU load should be around 10%, which gets consumed by the Android System Info process itself, and a small amount by Android System Info.
ok so im running the STOCK GB but im rooted and have been running gingertiny 9/29 ran into rebooting issues.. phone constently reboots after 20 mins of use. usually when this happened before like on stock kernels the battery temp would rise up to 104 but i kept eyes on the temp and it never goes over 78.4 F
not overclocking cpu im actually running at about 625 mhz but issue still occurs
SO with that being said i need help finding either a better kernal or trying to find solutions with this one.
i went back to complete stock and rooted to see if i still have this issue
any help will do thanks!
These questions belong in the Q/A section. This has zero relevance to development.
Now:
1) pull the battery then place it back into your phone.
2) Charge it awhile to make sure you haven't dropped a considerable charge during the bootloops.
3) Turn your phone on and move your clock speed towards 998400 (stock clock speed) via setcpu or however you underclocked.
This bootloop is likely due to you being underclocked so low. If you want, flash Tiny's latest kernel from 9/29/2011 to bring yourself up to date.
Was your min clock speed underclocked below the stock 245000? I had random reboot issues when I underclocked my min to 128000.
Having your max_freq set at 628 or whatever it was shouldn't cause reboot issues. You're phone should be rock-solid stable at a speed like that. I'd suggest taking a look at your voltages.
I've never run that kernel so I'm not familiar with what the voltage table looks like, but it might very well be that your voltage is too low. If your max_freq were higher, the transition through that clock freq would probably be too brief to cause an issue. I don't know if that kernel has sysfs enabled, but if it does, upping the voltage at that step .25 volts should cure it.
Min speed was at 628 even switching back to stock kernel still having issues I'm not sure what can be the issue I only last few mins playing any games or watching anything all speeds are stock
Sent from my ADR6300 using XDA App
Sounds like it's time to start wiping stuff.
Hi All,
After being a long time iPhone user i recently purchased htc one x, as a result my android skills are almost non-existent; so please bear with me.
I managed to flash clockworkmod recovery and rooted with SuperSU with no issues.
Purchased setCPU after reading the reviews and enabled. However the phone would reboot randomly a few times a day. Ususally when the screen was off.
After disabling setCPU there was no rebooting issue.
Has anyone got this app to work on the OneX, and if so which settings did you use?
Also has it been confirmed to work with all 4 cores?
FYI I had the following profiles setup.
Screen Off
Freq:640Mhz-51Mhz
Gov: conservative
Temp > 44.5
Freq:880Mhz-51Mhz
Gov: conservative
Battery < 30%
Freq:1000Mhz-51Mhz
Gov: powersave
Charging Any
Freq:1500Mhz-51Mhz
Gov: ondemand
Please note these profiles are based on no evidence, just on what I estimated to be about right...
Cheers
I did not start using SetCPU on my phone yet because it's not rooted, but first I would check if SetCPU doesn't require some kernel support? and if that's implemented in the custom ROM you're using? (if it's needed, I'm not sure).
Or maybe SetCPU needs an update to properly support our phones?
That Temp > 44.5 Profile, wouldn't that interfere with gaming? I have never used Temp profiles before (is it really needed?), only the other ones, like battery and screen-off and charging.
my one x has unlocked bootloader, recovery and root. I was running into some serious intermittent lagging issues, the phone in any app would just stall for 5+ seconds. after hours restoring after failure , it came down to the problem that using ANY cpu controll app, messed my phone up... BADLY! it seems at the moment (im assuming) apps like setcpu and cpu master are not quad core ready...
thanks for the responses guys.
I guess ill just wait until one of the devs can confirm this as working...
The reason is simple. We don't have rooted kernels yet. Until then stay away from messing with CPU speeds or under volting. Etc.
Sent from my HTC One X using xda premium
skywalker1970 said:
The reason is simple. We don't have rooted kernels yet. Until then stay away from messing with CPU speeds or under volting. Etc.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
+1
DO NOT mess with your CPU speeds yet. Undervoltage is causing reboots!
the software is not up to the hardware capability, i dont think the cpu control apps can handle quad core yet. and there is a lot of apps (esp. games) that lag a lot, and amazingly the cores are too lazy to work... im hoping for a better kernel that will address this issues.
If you want to at least see what's going on with the cores, I can confirm that Tablet CPU Usage Monitor works on HTC One X
It shows 2 icons in notification bar, each icon showing usage of 2 cores. Not sure how accurate it is, but so far had no problems with it and it seems to be reporting correctly. Developer is working on single icon with all 4cores in it, to save space.
I had the same problem, but if you delete your profiles you won't get reboots.
I'm just running default profile Max: 1500, Min: 760 Ondemand gov. and it has been a straight line for 6 hours when I was sleeping and no reboots.
jakejay said:
Hi All,
After being a long time iPhone user i recently purchased htc one x, as a result my android skills are almost non-existent; so please bear with me.
I managed to flash clockworkmod recovery and rooted with SuperSU with no issues.
Purchased setCPU after reading the reviews and enabled. However the phone would reboot randomly a few times a day. Ususally when the screen was off.
After disabling setCPU there was no rebooting issue.
Has anyone got this app to work on the OneX, and if so which settings did you use?
Also has it been confirmed to work with all 4 cores?
FYI I had the following profiles setup.
Screen Off
Freq:640Mhz-51Mhz
Gov: conservative
Temp > 44.5
Freq:880Mhz-51Mhz
Gov: conservative
Battery < 30%
Freq:1000Mhz-51Mhz
Gov: powersave
Charging Any
Freq:1500Mhz-51Mhz
Gov: ondemand
Please note these profiles are based on no evidence, just on what I estimated to be about right...
Cheers
Click to expand...
Click to collapse
I was having that problem too... In my opinion, I don't think that the phone can handle the Conservative governor setting. I set my governor to Interactive (On Demand works too)
Right now, I have my profile set to 1000mhz max and 475mhz min, with screen off profiles set to 475mhz max and min. I have not had any problems with the phone rebooting at all since setting those freqs. (And I don't want to quite go any lower yet). And I have it Set on Boot.
im now using rooted HTC One X(HOX) and installed RD-MIUI ROM quite sometimes. my kernel is still in stock. Im using setcpu and NO random reboot happen like what you have said. Yet, i am still confuse whether setcpu is good for my phone. based on my review, in the leading rom developer thread they not mention setcpu for their choice. they play alot with kernels to govern their hox cpu-s. could anyone do some comment.
I've been noticing something with my cpu that seems strange to me. I run an app called system panel to monitor my phone for various things and I've noticed for the past few days that my second core is constantly sleeping, even under a full load it stays at 100% idle and system panel says that cpu 1 is asleep. I downloaded kernel tuner and it says that cpu 0 is active but cpu 1 is offline. Was running stock rooted with no tweaks or other things added so i tried using odin to go back to stock but I still get the same info. The first screenshot is from kernel tuner with root and the sceond is from system panel with no root. Could my phone be defective?
Sent from my SGH-T989 using xda premium
Try system tuner in the play store. It has an option in settings to force the second core online, all the time. Set it to always on, and set it to boot that way. At least you can test it to see if it can be forced online. It is normal for the second core to be sleeping most of the time. In your first screenshot I see a toggle for cpu1 on/off at the bottom. You accidently toggle that?
Also, what's up with your CPU temp being 32°F? Are you in the arctic tundra?
You could also try flashing a new kernel. I believe there are a few for touchwiz based ROMs. IMO you should go aosp based ROMs. Slimbean4.1.2 with asdk kernel is the best performing rom/kernel combination I've ever flashed
there is no spoon.....
I tried flashing other kernels when my phone was rooted but it kept giving me the same thing. I tried the toggle in kernel tuner to see if I could turn the second core on after noticing the issue but it did nothing. System tuner was able to force the second core on for a bit but about 30mins after boot, the core went offline and has not come back on since.
Update: found out why core went offline. Apparently, if I touch any frequency settings such as core speed or governor for either core, the processor doesn't like it and shuts down the second core. Not sure if that's normal or not. Once phone is charged enough, gonna try flashing a different kernel to see if the same thing happens when I try to change the speed and governor.
Sent from my SGH-T989 using xda premium
Here is a long story, but please read it all as I really think it will help explain how the two cores work together.
I had/have the same thing. Exactly as you described it. Here is what I found (What I think anyway). I ODIN'd to stock, rooted, and installed Trickster MOD. That app showed only one core working. From reading up on Trickster MOD changing any CPU settings will apply to both cores. I changed the speed, and check the info panel. It showed both cores at the same speed that I changed it to, but the second core was still not moving. I reset Trickster MOD to default, uninstalled it, and installed Kernel Tuner. Same thing. Only one core was working. I started to think it was the stock kernel, so I flashed Tiberius, Jedi, and am now on Faux123. All kernels are doing it. It's not a kernel issue, but a kernel/Stock ROM function. Here is why I say that. I installed CPU Stats, and enabled it to display the CPU cores in the status bar. 99.9% of the time only one core was working (When I mention "99.9% of the time" I mean only one core would be working for about five minutes at a time. Which would lead a person to think somethings wrong since they normally wouldn't stare for ten minutes at the phone's kernel stats trying to catch the second core come on, and think only one was working.). I did catch the second core come on very briefly, so I knew it was working even for a split second. When I did see the second one on I tried to quickly open whatever kernel tuner I had to see what the cores were set to, and what they were doing, but by the time I opened the app only one core was working. I did some thinking, and I opened Lookout and ran a full scan, opened a couple more apps that use a lot of CPU. Then I opened, and kept on top my kernel tuner. To my surprise again 99.9% of the time only one core was working. Even if the CPU load was at 100%. The second core never came on, BUT it was because the first core wasn't at 100%. The CPU load would get to 90% when the first core would hit 100% under heavy load, but no second core was working at all. I finally watched it long enough to see a pattern (Like 15 minutes). The second core will only come on when the first core is at 100% AND the CPU load is at 100%. Then the second core kicks in. Once both cores were working at the same time the CPU load quickly dropped back under 100%, and once it did the second core shut right off to leave the first core do the work. So long story short your phone is not broken. That's the way it's meant to work. In my finding anyway. I'm running the stock ROM from ODIN with Faux123 JB release 1 kernel. That's all my mods are, and running quadrant I get an average score of 3730, so I'm thinking both cores have to be working to get a score like that. Here is the Play link to the CPU Stats app: https://play.google.com/store/apps/details?id=jp.takke.cpustats
And here is what it looks like in the status bar (The last icon on the left showing both cores at max in one screen shot, and the second screen shot showing only one core working. Just to show it does show both cores working separately.):
Thanks for the explination. I watched everything like you did and same results as you. I'm grateful for everyone's input. It puts my mind at ease knowing that everything is like it should be.
Sent from my SGH-T989 using xda premium
That's a good score. What frequency and governor you running?
there is no spoon.....
ctrlaltdeln said:
That's a good score. What frequency and governor you running?
there is no spoon.....
Click to expand...
Click to collapse
It's easier to show in pics that type all the stats. Here you go:
Not sure if me forcing my second core to be on constantly did something or what but I just ran quadrant twice and I got a score of 5661 the first time and 5981 the second.
Sent from my SGH-T989 using xda premium
damn dude. Now that's a score. Obviously your battery life will suffer with that kind of performance. If still using system tuner u definitely want to turn that second core back to default. You dont need all that muscle. I run at 1.18ghz/ lag free governor monday - Friday and 1.67ghz on the weekend. Battery life is more important to me. And everything is still buttery smooth. Glad all is well, your phone is back baby.
there is no spoon.....
since i cant post this in the dev for cm10 i have to post this here. i installed it last night on my phone and everything has been running pretty good. i understand its still a wip so im not complaining. what has come to my attention is the fact that my phone now likes to run at 1026 no matter how low i set it at. if its sitting there itll change to 384. when i was on stock rom rooted and unlocked, it would never change speed on powersave. now if i go into antutu or just performance under settings minimum will always change to 1026. i havent had a chance to really test if its affecting my battery life but i can let someone know. im bringing it up so maybe the devs can have their way with it. if theres any way i can help, just let me know.
0328 update
with the latest update the speed issue is still there and the camera has been improved although i havent tried video yet. but on 0327 it has like a staircase set up on the upper lefthand side of the screen. did a wipe and fresh 0328 so ill see how that goes. keep up the great work and as always let me know if there is anything i can do to help.
update:recorded video still has issue but nexus7 camera apps work perfectly to get to camera here. flash or the camera worked once and hasnt worked since. still a great rom.
It looks like you're not using the latest cm10 builds, you need to hit the "next" thing on the top right of the download page.
I recommend taking a spin with the houcha kernel. It's pretty much fixed the cpu stuff, and intellidemand governor is amazing; Turns off 3 cores when nothing is taxing and idles at correct minimums.
They are always up to date with the cm10 kernel commits as well.
I get amazing battery life.
Sent from my LG-LS970 using xda app-developers app
0429 update
yeah. its running pretty good. the video recording is fixed so that helps me out at work. with all the phones and tablets i have, i havent installed another kernal so thats the only thing im a little sketchy on doing. but since you recommend it i think i have to give it a look. if theres anything i should know about it, just let me know.
I was on the latest update but I just fat fingered my posts and wasn't double checking it. Just had to install a keyboard that better suites me.
update-flash on the camera work only when i use touch to focus. does that kernal help with that?
clean install of 5/5
Did a clean install last night with standard 4.2.2 gapps. Camera icon has has appeared without the need to install a 3rd party app to access it. Battery life is about the same as before with installing a different kernel. As my daily driver I would recommend it all the way. Follow the forums specific to the ROM and you can't go wrong. I'll keep updating about the progress until I can post on there.
powersave for cm10.1
If you want to get powersave to work correctly; 1.set both speeds to the same number 2.must be below 1026.
If you set them both to 1026, they will stay at that speed. If you set them to two different numbers the minimum and maximum will default to 1026 and1350, respectively, when the system feels it needs the power above 384 and will stay there. Hopefully this will help someone out.
The reason the cpu speed gets raised to 1026 is due to mpdecision. It boosts the cpu speed on touch to increase the interactivity and decrease the lag. mpdecision is a qcom blob and since we are trying to stay as close to mako as possible these is nothing I can do about that blob.
Then I guess my question is why on stock I can run at 384 min with max at 1512 on powersave and it'll actually run at 384 but this cant?
fine for me
I have not really had this problem at all weird
harrybear25 said:
I have not really had this problem at all weird
Click to expand...
Click to collapse
So what min and max speeds is your phone set at? What speed does it end up at after using it for 5 mins on the net?
5/14
my powersave settings with the max at 1512 and min at 384 seemed to stick longer than normal with this rom. im going to backup everything, revert back to zvb and then do a clean install of the latest and see how that fairs.
Did a full restore of my phone back to zvb. Did all the GPS stuff I needed to, rooted and unlocked. Proceeded to do a full wipe and install of 5/27 ROM. Speed issue still there but as noted before I found a small workaround and randomly today I got a message that maps had stopped working.
I did play around with the ROM before install gapps and found some interesting things. None really stuck out except Bluetooth not working at all.
After installing gapps, everything seems to work perfectly. Downloading 5/28 right now and dont expect much to change. Some updates hold my speed settings and some dont. Not really an issue.
6/1 build
powersave function was working correctly with the max at 1512 and the min at 384 right after initial update. using antutu the temp and battery level would be displayed incorrectly. after the first reboot though, everything went back to "normal." but on the brightside if you set the max to 918 and the min at 384 on powersave, it appears to now stay that way. no more having to set them both at the same speed. i will continue to play with the speed settings and see if anything else comes up.