Related
My Samsung Galaxy S2X was working fine after the ICS update, but since two days I,m unable to connect the phone to my laptop. It tries to install the software automatically and after a while it give out an error saying that Samsung Mobile MTP Device failed. Earlier, the phone directly gave the option in the notification bar to connect as an USB storage but now it shows up Connected as a Media device.
I've tried every option available, from deleting files with 16 characters to re-installing Kies and the USB drivers. I tried connecting the phone to different computers but the problem still persists.
Another issue after the update was that the Bluetooth transfer rate is very slow with ~30kbps transfer rate which earlier in GB was 3Mbps+.
I'm wondering if its got something to do with the new ICS update or am I the only one with this issue? The device is on stock ICS and is not rooted.
Thanks for any HELP...
EDIT:
Solved the problem by doing a factory reset.
abhilash_ksh said:
My Samsung Galaxy S2X was working fine after the ICS update, but since two days I,m unable to connect the phone to my laptop. It tries to install the software automatically and after a while it give out an error saying that Samsung Mobile MTP Device failed. Earlier, the phone directly gave the option in the notification bar to connect as an USB storage but now it shows up Connected as a Media device.
I've tried every option available, from deleting files with 16 characters to re-installing Kies and the USB drivers. I tried connecting the phone to different computers but the problem still persists.
Another issue after the update was that the Bluetooth transfer rate is very slow with ~30kbps transfer rate which earlier in GB was 3Mbps+.
I'm wondering if its got something to do with the new ICS update or am I the only one with this issue? The device is on stock ICS and is not rooted.
Thanks for any HELP...
Click to expand...
Click to collapse
Download the drivers from official Samsung website. The phone is SGH-T989
@alphadog32
No luck with installing the drivers. I've re-installed the drives available on Samsung's website.
Delete ALL the drivers for Samsung phones. And re-install them. But delete them ALL
Same God damn problem for me (what the hell.... ???) currently uninstalling Kies and Samsung drivers, downloaded the one on samsung webpage, will give update after re install
Update -*> Uninstalled everything, re installed still didnt work, updated Kies, still didnt work
I tryed the debug USB mode still didnt work
i Tryed differents usb cables
Tryed Differents usb connections
Still doesnt work !!
I dont know if theres any issues with the fact that I have a non-legit Windows 7 tho...
If anyone else got any ideas please share
Uninstalled the divers, deleted registry entries and re installed the drivers.Hate to say that it still won't work.
Sent from my SGH-T989D using XDA
It's not the phone guys. Cause if you re-install windows it will work. The phone connection. Have you guysbtried Linux?
I've tried on three different computers but it shows up the same way. Tomorrow I'll try on a different computer and report back.
Sent from my SGH-T989D using XDA
abhilash_ksh said:
I've tried on three different computers but it shows up the same way. Tomorrow I'll try on a different computer and report back.
Sent from my SGH-T989D using XDA
Click to expand...
Click to collapse
Have you tried using the connect to pc from top of drawer? If it still doesn't work. It is cable.
I will also try Kies Air via Wi-Fi once I get home.. currently so pissed damnit...lol
alphadog32 said:
Have you tried using the connect to pc from top of drawer? If it still doesn't work. It is cable.
Click to expand...
Click to collapse
After connection the only option in the notification bar is "connected as a media device-touch for more USB options"and this opens the MTP settings.
Sent from my SGH-T989D using XDA
Well i finally flashed mine i installed Mr.X custom rom and everything work flawlessly now !! Just a heads up ;-)
How is Mr. X's ROM compared to stock? Any inputs on that?
Sent from my SGH-T989D using xda app-developers app
Restoring the system is the only fix
Sent from my SGH-T989D using XDA
firebane said:
Restoring the system is the only fix
Sent from my SGH-T989D using XDA
Click to expand...
Click to collapse
Which system? Windows or android? and what do you mean by "restoring"? Factory settings?
I have been having the same problem for 2 months now. I don't know what's wrong. I have tried EVERYTHING! Nothing works!
I even installed the drivers while the phone is turned off, turned on with debug mode and when battery is taken off while connected: the OMAP4430 drivers: and still it didn't work, lol. I don't know what the hell is wrong with that f***er, lol? It won't give in!
I removed all Kies with all drivers many times, like 6 or 7 times, connected the phone to pc while it's off then turned the pc on, changed cable, usb port, tried different computers, tried this *#7284# thing, etc... The only thing i didn't try is black magic and voodoo! Or maybe i should try hypnosis? Or electric DC shock?
Anyway, if you have found a solution, please let me know
MagnumJoe said:
Which system? Windows or android? and what do you mean by "restoring"? Factory settings?
I have been having the same problem for 2 months now. I don't know what's wrong. I have tried EVERYTHING! Nothing works!
I even installed the drivers while the phone is turned off, turned on with debug mode and when battery is taken off while connected: the OMAP4430 drivers: and still it didn't work, lol. I don't know what the hell is wrong with that f***er, lol? It won't give in!
I removed all Kies with all drivers many times, like 6 or 7 times, connected the phone to pc while it's off then turned the pc on, changed cable, usb port, tried different computers, tried this *#7284# thing, etc... The only thing i didn't try is black magic and voodoo! Or maybe i should try hypnosis? Or electric DC shock?
Anyway, if you have found a solution, please let me know
Click to expand...
Click to collapse
Wow...2 months is quite some time. Please do a factory reset on your Android by going to settings-> backup and reset-> factory data reset.
Your phone should reset back to factory settings and you're good to go.
Sent from my SGH-T989D using xda app-developers app
abhilash_ksh said:
Wow...2 months is quite some time. Please do a factory reset on your Android by going to settings-> backup and reset-> factory data reset.
Your phone should reset back to factory settings and you're good to go.
Sent from my SGH-T989D using xda app-developers app
Click to expand...
Click to collapse
Factory settings mean that I will lose all apps and stuff? So how do I back up that when I can't connect to kies?
MagnumJoe said:
Factory settings mean that I will lose all apps and stuff? So how do I back up that when I can't connect to kies?
Click to expand...
Click to collapse
If you are rooted use Titanium backup else you may have to re download all the apps.
abhilash_ksh said:
If you are rooted use Titanium backup else you may have to re download all the apps.
Click to expand...
Click to collapse
Just so you would know, i restored my phone, and still it was not detected by my pc
so all that you get after a reset is the MTP error is it?
Sent from my SGH-T989 using xda app-developers app
I have upgraded to an S3 from having a Vibrant for years. I rooted and flashed several OS's to my Vibrant in those years without an issue ever. I have been trying to get files transferred to my S3 from my computer for 2 weeks now. The computer has the drivers installed correctly. It is recognized by name when I plug it in (it comes up as SGH-T999, Kies will recognize it too). whenever i try to transfer ANYTHING it stops in the middle of the transfer. just sits there with no further progress to be achieved. This is insanely frustrating. I am unable to root this thing because of the inability to actually transfer.
Things I have tried:
Uninstalling/reinstalling Kies multiple times
Uninstalling all USB device drivers multiple times
Reinstalling drivers through Kies and through Samsung's website multiple times
Factory reset on the phone multiple times (****ing aggravating btw)
Using my old Vibrant cable
Changing between MTP and camera mode... several times
Yelling at it
I have been trying to research how to fix this garbage for weeks now. there is no concrete way to remedy this problem that i have found. every thread about this is littered with the usual "uninstall your driver and reinstall it" nonsense that is the most generic response to anything tech related ever.
What I can tell you is that my phone is definitely getting recognized by anything that can do so. Odin, Kies, My computer, etc etc... it appears that the issue lies in the actual data transfer. As I mentioned, transfers initiate but will lock up mid-process and just hang there infinitely. Same goes with Odin when I try to get it to flash into CWM recovery.
Please, help. any time spent trying to fix this issue is greatly appreciated.
Are you uding the usb cable thst came with the phone?
Have you tried different cables? Or on another computer?
Im guessing your not rooted then?
Try installing the drivers ONLY. get them here:
http://forum.xda-developers.com/showthread.php?t=1728605
Uninstall previous versions of everything first.
What version odin are you using? Use 3.07 from above post if you're not already.
Also try this app
http://forum.xda-developers.com/showthread.php?t=1711009
If you are rooted try SwiFTP or another wireless transfer app.
Sorry to mention drivers again but if you're relying on kies to do that for you it could be the issue.
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 01:41 PM ---------- Previous post was at 01:40 PM ----------
Sorry I missed the part where you mentioned drivers and cable. Damn choppy xda app!
Sent from my SGH-T999 using xda app-developers app
Since you've tried everything else might as well follow this guide and install the drivers through the toolkit.
http://forum.xda-developers.com/showthread.php?p=28175575
I'd also run windows update and check if there's a new bios/drivers for your mobo and usb controller.
If you plug another "foreign" usb device does it install fine?
May not have any bearing whatsoever here but do you have usb debugging checked? And I think I mentioned it in the other post but try a different computer if possible.
You said that this happens when using odin too? As in you start the flash with Odin but it doesn't complete? Or it wont even start? Does it give you any message?
When plugged in in download mode, does Odin show your COM port in the upper left?
Plug in the phone and open device manager. Does it show any errors or anything?
Sent from my SGH-T999 using xda app-developers app
I recommend an app called airdroid. I had issues transferring stuff to and from my Mac and haven't had any problems since I started using the program. Besides it's wireless so I don't have to worry about the wires being a problem
psykhotic said:
Since you've tried everything else might as well follow this guide and install the drivers through the toolkit.
http://forum.xda-developers.com/showthread.php?p=28175575
I'd also run windows update and check if there's a new bios/drivers for your mobo and usb controller.
If you plug another "foreign" usb device does it install fine?
Click to expand...
Click to collapse
everything else works fine from my 6 USB ports (2 USB 3.0 ports as well). The tool kit solution still needs Odin to root. The problem is not detecting the device. it is the transferring of data. Data transfers begin but that's about it. Odin gets to "firmware update start" and then "boot.img" and just hangs there forever. no change. nothing else.
Is there a wireless way to do this? I have purchased Rom Manager but since i can't achieve root it is just useless now. The phone is brand new from the Tmobile store. Not once has it been dropped (to put into perspective how careful i am with my devices, I managed to drop my Vibrant once in ~3 years, which caused no damage, what a great phone that was). I have not been able to read about this same issue anywhere else either...generally its an issue with the PC not recognizing the device but when someone gets it to link up correctly, it works. this is the opposite.
thank you for your ideas so far.
DocHoliday77 said:
May not have any bearing whatsoever here but do you have usb debugging checked? And I think I mentioned it in the other post but try a different computer if possible.
You said that this happens when using odin too? As in you start the flash with Odin but it doesn't complete? Or it wont even start? Does it give you any message?
When plugged in in download mode, does Odin show your COM port in the upper left?
Plug in the phone and open device manager. Does it show any errors or anything?
Click to expand...
Click to collapse
Odin shows the "0:COM" like it should, which means it is able to read that the device is there, it just is unable to do anything after "boot.img", everything that is needed for this to work via the toolkit method is checked (USB debug and unknown sources).
I just got the s3 and had transfer issues too. Turns out my s2 drivers wasn't perfect for it even though it recognizes the device. I used the s3 drivers instead and that helped things a bit with accessing my phone's storage. So i ended up formatting my internal storage and that seems to do the trick for me.
If that doesn't work and odin still gets stuck then try different usb ports also try different wires
Sent from my SGH-T999 using xda app-developers app
Try connecting without the external sdcard in.
What build are you currently on. Since you haven't roited or anything im assuming you're still on either UVALEM or UVALG1. If so try initiating the software update. It should download the ota thatll take you up to UVALH2. Maybe that'll help.
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Try connecting without the external sdcard in.
What build are you currently on. Since you haven't roited or anything im assuming you're still on either UVALEM or UVALG1. If so try initiating the software update. It should download the ota thatll take you up to UVALH2. Maybe that'll help.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Currently do not have an external SD.
Baseband version T999UVLH2 is what i have running after a fresh phone reset.
Teo032 said:
So i ended up formatting my internal storage and that seems to do the trick for me.
Click to expand...
Click to collapse
Did you do that through terminal? doesn't the single partition mean that it would wipe everything?
Make sure the drivers you are using are the same ones that are in my comment (version).
What are you trying to flash through Odin? If the permissions of the files inside the tar file are not correct, the transfer will hang, and do nothing but give a timeout message after a couple minutes. I learned this the hard way.
In summary:
Use a different USB cable.
Download drivers, Odin, and CWM from my signature. After uninstalling the old drivers manually through devman (be sure to delete them during uninstall), reinstall them from the package you downloaded. Then use Odin to flash CWM. All three of these packages are tested and known to be 100% working. Please don't ignore this step. If I can't verify the validity of your installation sources, I can't rule this out for troubleshooting purposes.
If this doesn't work, it is most likely your computer. Are there any BIOS firmware updates that improve USB compatibility, or USB controller driver updates? The USB 3.0 isn't natively supported on =< Win7, so those are third party drivers. But I will assume you are connected to a USB 2.0 port.
Aerowinder said:
Make sure the drivers you are using are the same ones that are in my comment (version).
What are you trying to flash through Odin? If the permissions of the files inside the tar file are not correct, the transfer will hang, and do nothing but give a timeout message after a couple minutes. I learned this the hard way.
In summary:
Use a different USB cable.
Download drivers, Odin, and CWM from my signature. After uninstalling the old drivers manually through devman (be sure to delete them during uninstall), reinstall them from the package you downloaded. Then use Odin to flash CWM. All three of these packages are tested and known to be 100% working. Please don't ignore this step. If I can't verify the validity of your installation sources, I can't rule this out for troubleshooting purposes.
If this doesn't work, it is most likely your computer. Are there any BIOS firmware updates that improve USB compatibility, or USB controller driver updates? The USB 3.0 isn't natively supported on =< Win7, so those are third party drivers. But I will assume you are connected to a USB 2.0 port.
Click to expand...
Click to collapse
None of that worked. I did find a BIOS upgrade for my mobo that i didnt know was released, flashed it, and transfers still hang. i tried everything from your sig to no avail. i DON'T have access to another computer... BUT i do have Ubutnu running on my comp in conjunction with Win 7 Ultimate 64. can't seem to find too much on non-international S3 stuff for linux.
this has consumed my entire day and i am so frustrated.
Try in safe mode? This sounds really frustrating. I gave up when this happened with my mac. I think someone said it already but I always recommend Airdroid. It's just simpler.
psykhotic said:
Try in safe mode? This sounds really frustrating. I gave up when this happened with my mac. I think someone said it already but I always recommend Airdroid. It's just simpler.
Click to expand...
Click to collapse
airdroid for music transfers, got it. im screwed on the root thing though.
I didn't do it through terminal. I just connect it to the computer. Right click phone's internal storage and clicked format. It was a very quick format.
Sent from my SGH-T999 using xda app-developers app
Teo032 said:
I didn't do it through terminal. I just connect it to the computer. Right click phone's internal storage and clicked format. It was a very quick format.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
so let me get this straight... you plugged the phone in, right clicked on it in a browser window, clicked on format, selected yes to the "hey, this is going to erase everything on the device" warning pop up, and you were able to transfer files no problem after that? no adverse side effects came from this? it sounds like it would brick the phone...
Spaldino said:
so let me get this straight... you plugged the phone in, right clicked on it in a browser window, clicked on format, selected yes to the "hey, this is going to erase everything on the device" warning pop up, and you were able to transfer files no problem after that? no adverse side effects came from this? it sounds like it would brick the phone...
Click to expand...
Click to collapse
Yep that's what i did. That's only the storage partition. There's a system partition that isn't viewable on window explorer
Sent from my SGH-T999 using xda app-developers app
Teo032 said:
Yep that's what i did. That's only the storage partition. There's a system partition that isn't viewable on window explorer
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
didn't work either. i give up. MTP is garbage.
Different computer?
Sent from my SGH-T999 using xda app-developers app
I had these frustrations as well. I finally move where I was connecting the cables. First instinct was the easiest access on my computer. It always failed. I finally decided to try my back usb and it worked it also picked up as a mass storage as well.
Sent from my SGH-T999 using xda app-developers app
Yeah I'm starting to think you might need to use a different computer. Odin detects so it's not drivers.
From my experience with the hangs when i was on the s2. Many also reported this but what helped was different usb ports, wires, or an entirely different computer.
Sent from my SGH-T999 using xda app-developers app
Hello everyone,
I've searched around the forums but have yet to come across anyone with my exact set of problems.
Phone is a Samsung t999v on the Wind network.
I believe the problem started when a restore was done from a back up with no system information. TWRP tells me there is no OS on the phone.
As there isn't an OS zip file on the hard drive I cannot flash from internal card.
Odin 3.04 fails to add tar file of stock rom after repeated attempts.
drivers will not load with G s3 toolkit allowing phone to be recognized.
Connecting the phone to PC while in TWRP or even in download mode and the PC (Windows 7 ultimate wink wink) will show in devices as a modem but doesn't show up in "my computer". Drivers failed to load is the message after connecting the phone.
Last working OS was the latest AOKP build two.
I hoping someone can help me out. I do feel that this information is probably on here somewhere but I've searched with no luck.
I really trying to get an OS onto this phone and hope I haven't screw it up for a friend of mine. These forums have helped do some good works with my phone and phones of my friends that I guess I ended up thinking I knew more than I did. I should have stock with clockworkr which didn't have the option to back up without system. safer for a dummy.
I appreciate any and all comments.
nur.
Did you don't download the drivers from Samsung website?
Sent from my SGH-T999 using xda premium
vopezy said:
Did you don't download the drivers from Samsung website?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yes I can download them from the website but at times the device is still not recognized. For some reason this happens with all my Samsung products. My PC often time does not recognize them. It started months ago with my 10.1 Tab and them my i727 and this t999v. I have to contect the usb and disconnect several time before they'll connect even changing ports. But now they don't connect at all.
Since you have twrp, why don't you just flash a ROM?
Sent from my SGH-T999 using xda premium
serio22 said:
Since you have twrp, why don't you just flash a ROM?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I would love to but how do I get the ROM on to the phone? The phone is not being recognized by computer. I have an sd car but my other samsung phone isn't recognized by the pc either.
Uninstall the drivers you have installed (the Samsung ones) and uninstall Kies if you have that installed.
Install the drivers from my signature. They are an older version. I use them because all of the newer ones do exactly what you are describing. The PC won't see the device, etc.
If all else fails buy a card reader. One of the 10+ in 1 sd card readers. Probably should have one of those anyway; just a thought.
Aerowinder said:
Uninstall the drivers you have installed (the Samsung ones) and uninstall Kies if you have that installed.
Install the drivers from my signature. They are an older version. I use them because all of the newer ones do exactly what you are describing. The PC won't see the device, etc.
If all else fails buy a card reader. One of the 10+ in 1 sd card readers. Probably should have one of those anyway; just a thought.
Click to expand...
Click to collapse
Thanks for the advise. I'm going to go grab a micro sd reader now, hopefully. The drivers from your signature didn't fail to install as well. Can anyone think of what the source of the issue is. My drivers failing to install is happening on both of my PC's. I didn't try to install the older drivers on my second pc however.
nurlord said:
I would love to but how do I get the ROM on to the phone? The phone is not being recognized by computer. I have an sd car but my other samsung phone isn't recognized by the pc either.
Click to expand...
Click to collapse
You can download the ROM on another phone and transfer it to an SD card, after that you can swap it to the one with no os and flash it
Sent from my SGH-T999 using xda premium
The card reader fixed it. Thanks everyone for helping me out. No more lurking for me.
P.S
If anyone has any additional insight into my driver issues I'm all ears.
I have the same problem with my phone being recognized. I will sit there and plug and unplug the cable into the same usb port repeatedly, and eventually it'll be recognized.
Sent from my SGH-T999 using Tapatalk 2
Did the drivers fail to install from the installation package or when you plugged the device in after that installation? Also, are you in MTP or PTP mode?
nurlord said:
The card reader fixed it. Thanks everyone for helping me out. No more lurking for me.
P.S
If anyone has any additional insight into my driver issues I'm all ears.
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
Follow ALL the steps in order EXACTLY.
You will see it works for you. It has for every other person that I worked on their machines for...
If it does not, you did something wrong in following the steps.
if you do it exactly, it WILL work!
Good Luck!
Aloha
ports amethyz
bfranklin1986 said:
I have the same problem with my phone being recognized. I will sit there and plug and unplug the cable into the same usb port repeatedly, and eventually it'll be recognized.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
That is what I use to do but that no longer works.
Aerowinder said:
Did the drivers fail to install from the installation package or when you plugged the device in after that installation? Also, are you in MTP or PTP mode?
Click to expand...
Click to collapse
It says MTP mode failed so I guess that's the mode. Both have happened but usually the fail happens after I plug in the device.
bobolinko said:
Go here:
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
Follow ALL the steps in order EXACTLY.
You will see it works for you. It has for every other person that I worked on their machines for...
If it does not, you did something wrong in following the steps.
if you do it exactly, it WILL work!
Good Luck!
Aloha
Click to expand...
Click to collapse
Appreciate it. I'll try it out now.
I'd get a new cable
Sent from my SGH-T999 using xda premium
nurlord said:
P.S
If anyone has any additional insight into my driver issues I'm all ears.
Click to expand...
Click to collapse
Sometimes peoples use port locate on the front panel of their PC.... Always use the usb on the back...... Thoses on the motherboard.
If it's not your case.... Try to switch port..
Sent from my SGH-T999 using Tapatalk 2
damn it im in the same position as you
i wiped my phone as well no os
i put the sd card into my blackberry copied the rom on to the phone but he phone wont pick it up
wont recongize my phone when i plug it in as well -_-
bobolinko said:
Go here:
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
Follow ALL the steps in order EXACTLY.
You will see it works for you. It has for every other person that I worked on their machines for...
If it does not, you did something wrong in following the steps.
if you do it exactly, it WILL work!
Good Luck!
Aloha
Click to expand...
Click to collapse
I followed all the steps exactly and the problem still persists. KIES fails at installing drivers and same happens when I connect the phone. The only place I can there being an error was that I replaced and copied the files in Windows INF as the new files had the same names as the old ones. As for that everything else I followed the steps exactly with no luck.
Android_Monsters said:
I'd get a new cable
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Might be worth a shot but it doesn't seem likely that it's a cable issue. The cable is effectively new and PC does recognize that I'm connecting a device.
cuzmonote said:
Sometimes peoples use port locate on the front panel of their PC.... Always use the usb on the back...... Thoses on the motherboard.
If it's not your case.... Try to switch port..
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Trying that now but we'll see.
sky14 said:
damn it im in the same position as you
i wiped my phone as well no os
i put the sd card into my blackberry copied the rom on to the phone but he phone wont pick it up
wont recongize my phone when i plug it in as well -_-
Click to expand...
Click to collapse
What recovery are you using to try and read the SD card?
I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?
jconway1968 said:
I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?
Click to expand...
Click to collapse
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
bmg002 said:
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop
If you flashed TWRP 2.6.3, that's your problem.
Flash 2.6.1
This is the wrong section because it has nothing to do with ROM development.
With that being said if you can still boot into twrp you still have hope. Try loading a different ROM into an SD card using a converter and slide back in the phone to properly wipe first then re flash.
I don't understand why you can't get a proper USB connection going but above suggestion may solve it.
Sent from my SGH-T989 using xda app-developers app
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
jconway1968 said:
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop
Click to expand...
Click to collapse
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.
bmg002 said:
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.
Click to expand...
Click to collapse
Thanks for your help. Here are the answers to your questions:
I think there is something wrong with the micro USB input on the phone. I have reinstalled the drivers several times. I have tried different cables and different computers. I even tried the toothpick trick. No luck.
I do have a GN2. The SG2 is for my daughter...
It is a genuine SGH-T989 I checked under the battery.
soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...
jconway1968 said:
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...
Click to expand...
Click to collapse
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?
soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.
jconway1968 said:
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.
Click to expand...
Click to collapse
In twrp settings change it to use rm instead of formatting
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
jconway1968 said:
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?
Click to expand...
Click to collapse
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app
soupysoup said:
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???
jconway1968 said:
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???
Click to expand...
Click to collapse
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.
bmg002 said:
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.
Click to expand...
Click to collapse
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.
jconway1968 said:
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.
Click to expand...
Click to collapse
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.
bmg002 said:
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.
Click to expand...
Click to collapse
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.
jconway1968 said:
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.
Click to expand...
Click to collapse
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.
bmg002 said:
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.
Click to expand...
Click to collapse
You were great!!! Thanks again...
UPDATED**** 1-23-2014
The USB issue was due to the port malfunctioning. I ordered a replacement part via Ebay for about 7 bucks and fixed it. Now I have PC access. As far as in updating the firmware...after 12 failed attempts via AT&T I just manually did it via Odin and now it is updated. Thanks for everyone trying to help me out. Hated it was a hardware issue and not just a tech/Soft problem :/
The past week I have noticed my Note 2 charging slower than normal. Sometimes randomly disconnecting and connecting when plugged into the ac adaptor. I figured it could have been the cable or the adaptor itself...so I replaced it. It seemed to work...but then it was acting buggy again. Then...lastnight I noticed when I was wanting to transfer a few file from my laptop to the phone...it would charge the phone but would not allow it to connect to the file system at all. I scoured the net for solutions and tried just about everything I could find...as well as the more simpler options as try a different cable...but nothing worked. I also tried it on 2 other laptops...no luck.
My phone was rooted...but never used a custom rom and so I decided to just unroot and do a clean slate in case there was something that borked. Everything went smooth...but now, after doing the unroot and factory reset...the usb still charges...but no connection at all. I went through all the settings and set them as they should and nada. On top of that while I do have my phone service...I have no data at all. I have called att and they were no help. Samsung passed me off to android customer service and they were no help. So now what can I do?
Problems:
-No mobile data available
-No USB to PC file transfer ability (kies air works...but not usb to pc)
-I also cannot update past 4.1.1. The updater says I can check again in 24 hours....lol
Ok...so I fixed one issue already. Found a solution to the mobile data network issue. It would appear that due to the factory reset...it lost all of the APN info for linking with at&t. I found how to restore it here: http://forums.att.com/t5/Android-Di...-Phone-APN-Settings/td-p/3467513#.Ustjil8e-Co
To fix the USB connection to your computer
You need to connect USB. Then, in dialer, dial *#7284#
Go to Qualcomm settings
Select MTP+ADB
Done."
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
ShrekOpher said:
To fix the USB connection to your computer
You need to connect USB. Then, in dialer, dial *#7284#
Go to Qualcomm settings
Select MTP+ADB
Done."
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Tried that...before I unrooted and even after unrooting. Still doesn't work
Try installing Samsung Kies on your computer and updating your drivers.
Or try a different cord it might be a bad cord.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Have you tried putting the phone into download mode amd see if it will read your phone that way?
Sent from my GT-N7105 using XDA Premium 4 mobile app
ShrekOpher said:
Try installing Samsung Kies on your computer and updating your drivers.
Or try a different cord it might be a bad cord.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I have done both...even tried 3 other cords...one of which is my extra/spare Samsung galaxy note 2 cable. no luck with any as well as the Kies route
terpin32 said:
Have you tried putting the phone into download mode amd see if it will read your phone that way?
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Didn't think about trying that. I just attempted though and no luck either
This is irritating because ever since I unrooted and restored to original fw the usb charge works perfectly fine...no longer cutting in and out like it used too. But just cannot connect to the PC via USB for file transfers. Kies works fine doing that...but USB is no long an option
Have you tried uninstalling the old USB drivers for it then reinstalling them?
Sent from my GT-N7105 using XDA Premium 4 mobile app
takean2k said:
Didn't think about trying that. I just attempted though and no luck either
This is irritating because ever since I unrooted and restored to original fw the usb charge works perfectly fine...no longer cutting in and out like it used too. But just cannot connect to the PC via USB for file transfers. Kies works fine doing that...but USB is no long an option
Click to expand...
Click to collapse
try different usb slot.
terpin32 said:
Have you tried uninstalling the old USB drivers for it then reinstalling them?
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes...no luck
So I did a factory reset again just in case...still the same issues. USB will charge...but no connect. Kies and PC will not see it. Only kies air works. On top of that I have now attempted to update the firmware via at&t through settings and it fails EVERY time. It downloads 100% and after reboot and goes into at&t installation it always fails at 24 or 25%. 5 times in a row...for 5 days is ridiculous. Any more ideas?
At this stage I wish I could re-root it and then flash the original stock rom again to make sure that it didn't bork the first time. But I cant I'm assuming because I need to be able to connect via USB. Am I wrong? Am I wasting my time?
takean2k said:
So I did a factory reset again just in case...still the same issues. USB will charge...but no connect. Kies and PC will not see it. Only kies air works. On top of that I have now attempted to update the firmware via at&t through settings and it fails EVERY time. It downloads 100% and after reboot and goes into at&t installation it always fails at 24 or 25%. 5 times in a row...for 5 days is ridiculous. Any more ideas?
At this stage I wish I could re-root it and then flash the original stock rom again to make sure that it didn't bork the first time. But I cant I'm assuming because I need to be able to connect via USB. Am I wrong? Am I wasting my time?
Click to expand...
Click to collapse
Since USB is charging. Can you check under device manager, what name it is showing for your device? May be you are missing drivers therefore your phone is not recognized by PC.
A_youu said:
Since USB is charging. Can you check under device manager, what name it is showing for your device? May be you are missing drivers therefore your phone is not recognized by PC.
Click to expand...
Click to collapse
It doesn't show anything. The only thing that stops the phone charging when I disable or uninstall is what is labeled Renesas electronics USB 3.o root hub and host controller. 2 separate items. BUT...its not plugged into a 3.0 port anyway...even though in the past it has worked fine...for over a year no less. I have uninstalled that item...as well as uninstall the Samsung drivers before...rebooted while phone is NOT plugged in...re-installed the Samsung drivers...then plugged the phone back in and it still doesn't work. Still charges...and the item comes back...but no usb to pc file exploring capabilities. Same for other computers too. Have tried another computer as well...one that my phone has never plugged into. It charges...but no connectivity. The computers just don't even see it for some reason.
Is there a way I can root the phone without USB to pc support? I'm hoping to try and update it once rooted with ODIN.
You don't need root access to flash a stock rom. I was having usb-charging issues, and a return to stock 4.1.1 cured the issue. I replaced the USB board but that didn't fix it. So, stock would be my advice.
You could put the stock package on your SD card using an adaptor and your PC. But I don't know if you have a custom recovery.
rangercaptain said:
You don't need root access to flash a stock rom. I was having usb-charging issues, and a return to stock 4.1.1 cured the issue. I replaced the USB board but that didn't fix it. So, stock would be my advice.
You could put the stock package on your SD card using an adaptor and your PC. But I don't know if you have a custom recovery.
Click to expand...
Click to collapse
My only thing is I have no usb to pc file sharing capabilities unless I use Kies Air. Otherwise I cannot. I have tried now 8 times so far to update the phone and I cannot. It downloads fine...but upon rebooting to install it fails everytime at 24 to 25%. All I want to do is update the phone. It is a simple as that.
Take your SD card out of your phone.
Put it in an adapter.
Put that in a PC with an SD card slot.
Copy the stock ROM to the SD card.
Remove the SD card from the PC and adaptor, then insert it in your phone.
Boot into recovery and flash the ROM.
rangercaptain said:
Take your SD card out of your phone.
Put it in an adapter.
Put that in a PC with an SD card slot.
Copy the stock ROM to the SD card.
Remove the SD card from the PC and adaptor, then insert it in your phone.
Boot into recovery and flash the ROM.
Click to expand...
Click to collapse
When you say boot into recovery...are you talking about where I load rom from sd card...adb or something like that? And...can I do this for 4.3? I have 4.1.1 already. I was trying to update to 4.1.2 to see if it will fix the usb issue as well as the updating issue. But if I just had the 4.1.2 and flashed it would that do the same thing as updating?