Hello forum Seniors
I have a problem with my a100 device, I searched for days a solution, but had no success.
I bought this device with original HC and updated with ACER_AV041_A100_0.002.00_ww_GEN1 ICS rom, to this point everything working.
everything worked, boot recovery/gps/games/ics/ everything
And I used it for a long time. Then I reseted the device.
And the problem began.
the device does not turn over.
I can START fastboot, but it dont sync with pc (I got drivers instaled)
I can START recovery, but dont install nothing ( I think my recovery is damaged)
I hope that there is a solution. But have not found any yet.
my recovery does not install or mount sdcard and external sd
when I enter, I see a red triangle with a dead android
I PRESS HOME key and recovery list this
Android system recovery <3e>
Android system recovery utility
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
________________________________________
E:/dev/block/mmcblk1 does not exist
Finding update package...
E:failed to mount /mnt/sdcard (No such file or directory)
E:Can't mount /mnt/sdcard/update.zip
Instalation aborted.
----end----
I can navigate with VOL keys but i CAN'T select any option
Device not unlocked in fastboot (unluck mode) dont listed
I have the number of ADB connect, is this a CPUID to use in EUU_SBK????
There is a guide to using the EUU_SBK??? link please?????
This is my last hope.
sorry my bad inglish im a brazilian noob
thank all
E:/dev/block/mmcblk1 does not exist
That's recovery. Its saying recovery doesn't exist. If you can wait for a bit I'm working on fixing this but its going slow as some people aren't as clear about whats happening as you are, I was chasing a fix that didn't even need fixing, thank you. Its either something different and new, or its something thats been happening this whole time, but no one mentioned the error output aside from the update.zip failure.
I'll begin work on this new issue, and hopefully it can be fixed with the rest. The other devices seem to have recovery, however it seems it only works in CWM or TWRP, you seem to have stock recovery. I would suggest maybe trying to install CWM from HERE. Follow the instructions exactly and see if you can flash the CWM recovery and get into that. Please report back if this works or not, and what happens when you try.
Hi pio_masaki
Device not BOOTup, freeze in acer logo and I never root this device only apply official update
fastboot can't sync with pc for install a recovery and fastboot is locked
Fastboot display
"Bootloader v0.03.06-ICS: Starting Fastboot USB download protocol"
but fastboot no running any commands
fastboot erase
fastboot flash recovery.img
I try now a new SDcard formated with FAT32 clean, root directory with update.zip, renamed Acer_AV041_A100_1.014.00_WW_GEN1 to update.zip
boot in recovery
------------------------------------------
Erasing cache before SD update...
SD update cmd: recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
----end-----------------------------------
now display dead android with RED TRIANGLE (!), press HOME key
-------------------------------------------
Android system recovery <3e>
Android system recovery utility
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
________________________________________
E:/dev/block/mmcblk1 does exist
Finding update package...
E:failed to mount /mnt/sdcard (No such file or directory)
E:Can't mount /mnt/sdcard/update.zip
Instalation aborted.
------------end-------------------------
note now display E:/dev/block/mmcblk1 does exist<<<<<<<<<<<<<
but I can't select any option in recovery only VOLUME keys work and HOME hide text
I can make Hard Reset with keys
(VOL-)+Power on vibrate swift lockscreen
display
-------------------------------
Erasing cache...
Erasing data...
--------end--------------------
restard and freeze in acer logo.
thank you and sorry my inglish
Your english is fine, don't worry
Ok, so previously mmcblk0p1 was NOT found, now it IS found? Well thats better then nothing. I've seen this on another device, though it was cache that was mounting and not mounting at almost random times.
I've been tracking this as far as I can, and it appears the A100 shares an issue with the A500 (and maybe A200?) that results in a bad sector(s) and must be partitioned around. If this is the actual cause, its a hardware failure, not software, and isn't anything you did, it just died.
This explains the string of bricks that seem to occur out of nowhere.
My original method was to DD a working image to the device, completely restoring the partition with a clone of my working system, cache, recovery, etc. However if its a damaged EMMC, this will not work either. This also explains why past attempts have failed on other devices that I've tried helping with off the forum.
As I can emulate a "bricked" device, I don't have a device with this actual issue to diagnose and attempt to fix, my device doesn't have this problem. I'm not real sure I can proceed much farther until either my device does this bad sector thing, or I get my hands on a device that is already bricked and begin finding the method to repair it.
Ok..now dealing with what DOES work...
==========================================================
Android system recovery <3e>
Android system recovery utility
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
=========================================================
have you tried selecting any of these options? Highlight with volume, and hit power to select, try from
apply update from external storage and record what it says (hopefully it just installs and your're good to go)
then
apply update from cache and again record what it says, hopefully it works fine.
then
wipe data/factory reset and again record what it says
then
wipe cache partition and record what it says
Do these in the order I mentioned, only doing the next if it fails. If it does install, don't do the rest, just report back success and what you did, in the order you did it, to get it going again.
Edit: Oh and reboot after each selection if it fails, and reboot into that menu again.
This is the problem, can't select any option
I select a option with VOLUME key, put cursor on apply updade from external storage so i hit power
And nothing happens.
If i hold power, device force power off...
Power key work perfect, only in recovery dont work...
Thank you
My friend have the same device with the same update 0.002.0_WW_GEN1, his device work normaly, when i go into recovery, I cant select any option too
I think if i reset his device, this cant boot to...i dont try it
I can upload video in youtube for you, if it help u see my case.
Ok, if power doesn't work on either device, try the home button. It's been so long since I ran stock recovery I may have gotten the buttons mixed up with CWM recovery, which uses Power as Enter. And good call on not doing anything on the other device, you never know. It shouldn't cause issues, but just in case, don't. We don't know exactly what is causing this, and if its anything like the hardbrick bug in some Samsung devices, anything can trigger it if it happens in the right order or time.
pio_masaki
Recovery does not select options when press power /home/reset/volumes
I need a guide for use EUUs_SBK rom, I have my CPUID
And in my friend's device, how i back to original hc?
Recovery have the same problem does not intall update.zip, if I install the CWM, Can I do official update to back original state? I really need back to factory rom and recovery.
Thank you for help
If the device is having issues, I wouldn't suggest going back to HC, it can only cause more problems. If you run the official update.zip it returns back to how it came from Acer, stock recovery, locked bootloader and unrooted stock ICS.
The EUU and SBK stuff has been attempted before and failed. Its in various threads with the same bricking issues, and doesn't seem to help, or work. At this point I think NVFLash is about the only option we have left to try to bring these back from a bricked state. Sadly Acer decided to try to lock out NVFLash, so it'll take some time to see if it will work with our A100s. Vache has the NVFlash config files, so its a start, it may work it may not, however I can't test much as my device doesn't have this bricking issue, so any testing on my a100 doesn't really mean anything.
I've actually looked around locally for a bricked a100 to see if I can get and begin working on a method to repair it, but either there are none locally bricked, or none are up for sale (sent back to Acer for repair).
I'm working on it, but I have a couple roadblocks preventing me from really trying, time, and no bricked device.
Ok doing some more digging around, I've come across a thread with some posts that seem to lead me to believe that (non stock) our bootloaders don't respond to the correct SBK, mine doesn't either, and I think it's because our method for unlocking the bootloader uses the A200 bootloader, which will NOT accept the SBK, even if correct, because its wrong for that bootloader.
This leaves out NVFlash, it can't authenticate with the bootloader so it gets blocked, so while it would fix the bricks (outside of hardware failure) it's not an option for us until we find out the correct SBK for our bootloaders.
For those on stock, the update.zip failures seem to be common, however I have a few things for you to try (I think you're stock ICS right?)
download this update.zip
Its ICS 014, should work.
It seems people had issues with it working because it originally came encrypted, and had to be decrypted to work. If it wasn't, you got update.zip not found or various other errors like you did. Thanks to azmode for this.
Take your external SD card, insert it into your PC however you can, and format it FAT32. Before doing this, copy any and all files you wish to keep safe to the PC as this will erase the card completely. If your card reader has a light, wait for it to stop flashing before moving on.
Take the update.zip file you downloaded and place it on the card. Nothing else, no folders or pics or music or anything else. Again wait for the activity light to stop for a few seconds BEFORE hitting eject. Also verify the file is named update.zip nothing else, and not update.zip.zip which can sometimes happen. All lowercase letters.
Once that is done make sure the tablet is OFF, completely, not sleeping but off. Leave it off for at least 30 seconds (or if its been off the whole time don't worry about it) then insert the SD card. Hold Volume Down (closest to lock switch) then press and hold Power and hold for about 3 seconds until the text FIRST comes up, immediately release the buttons as soon as you see any text coming up.
This should once again attempt to read update.zip from the external sd card, and hopefully finds it, or gives a different error then before.
These instructions aren't much different from before, as various other users have outlined this procedure before, in particular blackshinobi who has spent alot of time on the bricked threads.
That update.zip should be decrypted which should allow it to pass the bootloader checks. I think this is where some of the issue is coming from, its that stupid bootloader encryption blocking even valid attempts to restore the tablet to working condition or updating.
If anyone is willing, could they pull their 100% official stock bootloader and stick it somewhere to play around with? Or, I suppose, someone with a 100% official stock ICS system try NVFlash on their system and see if it allows or gives permission denied? If the 100% official still denies, then our SBK generation is wrong, if it does, then its our bootloaders, and we can attempt to fastboot flash the correct bootloader to pass SBK for EUU.
Have you a alternative link? For update.zip
Error 509
Im upload video now, I'm using update.zip from this link http://forum.xda-developers.com/showthread.php?t=1611696
ACER_AV041_A100_0.002.00_ww_GEN1 is the rom instaled and freeze from here http://vache-android.com/v1/index.php?site=files&file=139
--I think if you install it, you will have the same problems.
and i try this link too http://vache-android.com/v1/download.php?fileID=109 and http://vache-android.com/v1/download.php?fileID=116
-------------------Edit----------------
This is a video for try update with recovery in a100
same problem with 2 devices, but my a100 freeze in normal boot
http://youtu.be/CWFlA1W08wE
Im using a formatted microSD with only update.zip file
I tried all the links above.
thank you for help
Did you ever have any luck getting your tablet running again?
It looks like I am having the same issue as you are. with a couple of minor variations. I've tried all the recommendations in this thread and the ones linked from here but I'm not making any progress. I fear there is nothing I can do and that the device is now a fancy brick does anyone have any other ideas on getting this fixed?
1. When I boot to recovery, get to the dead Android I see the following messages in yellow
E:Can't open /dev/block/mmcblk0p5 (No such file or directory)
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/command
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_install
E:Can't open /cache/recovery/last_install
E:Can't open /dev/block/mmcblk0p5 (No such file or directory)
E:failed to mount /cache (No such file or directory)
2. When I try to unlock the bootloader in fastboot mode (fastboot oem unlock) the screen blinks off and back on and I never get the lock.
wperry1 said:
Did you ever have any luck getting your tablet running again?
It looks like I am having the same issue as you are. with a couple of minor variations. I've tried all the recommendations in this thread and the ones linked from here but I'm not making any progress. I fear there is nothing I can do and that the device is now a fancy brick does anyone have any other ideas on getting this fixed?
1. When I boot to recovery, get to the dead Android I see the following messages in yellow
E:Can't open /dev/block/mmcblk0p5 (No such file or directory)
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/command
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/last_install
E:Can't open /cache/recovery/last_install
E:Can't open /dev/block/mmcblk0p5 (No such file or directory)
E:failed to mount /cache (No such file or directory)
2. When I try to unlock the bootloader in fastboot mode (fastboot oem unlock) the screen blinks off and back on and I never get the lock.
Click to expand...
Click to collapse
Those errors have been identified as a dead emmc, which is currently unrecoverable. And is happening on quite a few of iconia's. This thread was prior to the devs and users finding thee issue. See all the brick threads here.
Ajuda em portugîes
rollidark said:
Hello forum Seniors
I have a problem with my a100 device, I searched for days a solution, but had no success.
I bought this device with original HC and updated with ACER_AV041_A100_0.002.00_ww_GEN1 ICS rom, to this point everything working.
everything worked, boot recovery/gps/games/ics/ everything
And I used it for a long time. Then I reseted the device.
And the problem began.
the device does not turn over.
I can START fastboot, but it dont sync with pc (I got drivers instaled)
I can START recovery, but dont install nothing ( I think my recovery is damaged)
I hope that there is a solution. But have not found any yet.
my recovery does not install or mount sdcard and external sd
when I enter, I see a red triangle with a dead android
I PRESS HOME key and recovery list this
Android system recovery <3e>
Android system recovery utility
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
________________________________________
E:/dev/block/mmcblk1 does not exist
Finding update package...
E:failed to mount /mnt/sdcard (No such file or directory)
E:Can't mount /mnt/sdcard/update.zip
Instalation aborted.
----end----
I can navigate with VOL keys but i CAN'T select any option
Device not unlocked in fastboot (unluck mode) dont listed
I have the number of ADB connect, is this a CPUID to use in EUU_SBK????
There is a guide to using the EUU_SBK??? link please?????
This is my last hope.
sorry my bad inglish im a brazilian noob
thank all
Click to expand...
Click to collapse
Ola Amigo parece que você resolveu esse problema, sou brasileiro como você. Estou com o mesmo problema, como voce resolveu isto?
help
Dear All i have the issue with my Skyvega A 800s that whenever i start my phone its open in recovery mode and when i check log it says " dev/block/mmcblk1p1"
Cant format unknown volume: /emmc
Actually before this everything i going smoothly i flashed the rom and the tried to update from sky station when its complete and phone restart the problem comes please help me out please.....
leitejr said:
Ola Amigo parece que você resolveu esse problema, sou brasileiro como você. Estou com o mesmo problema, como voce resolveu isto?
Click to expand...
Click to collapse
adnandani said:
Dear All i have the issue with my Skyvega A 800s that whenever i start my phone its open in recovery mode and when i check log it says " dev/block/mmcblk1p1"
Cant format unknown volume: /emmc
Actually before this everything i going smoothly i flashed the rom and the tried to update from sky station when its complete and phone restart the problem comes please help me out please.....
Click to expand...
Click to collapse
Well this isn't a forum for that device, and not being familiar with it I can only guess. mmcblk1p1 is usually external SD card, if one is inserted, remove it, if one is not, insert one. See what it does on each try. It may be internal SD card too, hard to say since I don't know that device, although a link to it's recovery.fstab would help there, or just /system/etc/vold.fstab.
Sorry,
I'm one concept
This possible installed replicant recovery?
Just for '' flash img'' option
I'm test replicant os for my gtab2 3110, i'm look this option, i'm just copie img for my device and selected '' flash image'' this installed os
( my problematic for my a100 is i'm manually wipe,problem i'm erase file system ( etc,block,bin etc...)) yes i'm stupid men
Sent from my GT-I9305 using XDA Premium HD app
winny57 said:
Sorry,
I'm one concept
This possible installed replicant recovery?
Just for '' flash img'' option
I'm test replicant os for my gtab2 3110, i'm look this option, i'm just copie img for my device and selected '' flash image'' this installed os
( my problematic for my a100 is i'm manually wipe,problem i'm erase file system ( etc,block,bin etc...)) yes i'm stupid men
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
AFAIK it hasn't been made for the a100, so other then that, I dunno.
Sent from my Galaxy Nexus using Tapatalk 2
Ok thanks
You not any solution for me?
Sent from my GT-I9305 using XDA Premium HD app
winny57 said:
Ok thanks
You not any solution for me?
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
Besides making that recovery not really, though you can fastboot flash images also.
I'm test this
My device reboot fastboot, this working
I'm flash not working
Sent from my GT-I9305 using XDA Premium HD app
---------- Post added at 02:45 AM ---------- Previous post was at 02:43 AM ----------
I'm not at home but try to remember but as I flash with fastboot
Sent from my GT-I9305 using XDA Premium HD app
Hi Guys....
Once sory my bad english ı am turke in turkiye.
MY ACER İCONİA TAB İS UNLOCK BOOTLOADER.
I AM OPENED MY A100 THİS SCREEN WRİTE
"Bootloader version 0.03.05-ics (unlock mode)"
after ACER ACER ACER ACER Logos and not opened. not booting. not bootanimation.
I AM PUT THE MY SDCARD Update.zip...
opened in recovery mod.
recovery mod opened but screen write
"e: can't mount recovery/command
e: can't mount recovery/logs
..........
.........
I AM FASTBOOT MODE AND INSTALL ACER DRIVER - ADB SDK MANAGER... put the platform-tools in recovery.img
fastboot erase recovery
fastboot flash recovery recovery.img
success recovery cwm but recovery mod opened screen write
"e: can't mount recovery/command
e: can't mount recovery/logs
I AM FASTBOOT MODE AND put the platform-tools in update.zip (hc - ics leak - ics stock ı am trying all roms)
fastboot update
not success is fastboot cmd.exe screen write
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
I AM Put the my scdard update.zip
recovery mod opened
update zip all from update.zip sdkart (cant mount sdcard)
update zip internal sdd (cant mount emmc)
wipe data (wipe aborted mount data)
format system (formatting aborted cant mount system)
QUESTIONS...
My acer iconia tab a100 bricked ?
what should ı do ?
THANKS FOR ALL ALREADY
Merhaba Abi!
Sounds like the Bootloader is not in Download mode. Try these instructions, they worked for me: http://forum.xda-developers.com/showthread.php?t=1608152
DJ_SpaRky said:
Merhaba Abi!
Sounds like the Bootloader is not in Download mode. Try these instructions, they worked for me: http://forum.xda-developers.com/showthread.php?t=1608152
Click to expand...
Click to collapse
Honestly I don't think there's hope, its showing the signs of emmc failure. Never know though, don't give up until you've tried everything twice! Still searching for a brick to work with but still no luck.
Tapatalked from my Galaxy S II.
Pio, Ouch, you would be the one who would know.
OP, Sorry to hear.
Sent from my Acer Iconia Tab A100 using xda app-developers app
DJ_SpaRky said:
Pio, Ouch, you would be the one who would know.
OP, Sorry to hear.
Sent from my Acer Iconia Tab A100 using xda app-developers app
Click to expand...
Click to collapse
Well I'm basing this solely on his reported errors, history has shown once those mount errors show up its pretty much done for until we can come up with something new. But, dead hardware is dead hardware.
I hope I'm wrong of course, and OP please continue trying some of the methods in other brick threads.
Tapatalked from my Galaxy S II.
Please help me
I unlocked the bootloader last night
then I flash the kernel , then the rom
http://forum.xda-developers.com/showthread.php?t=1719746
But when I reboot the play , it stayed in "Sony Ericsson"
then I take off the battery and reboot
Still existing
What can I do?
The situation of my phone now is that , whenever i turn on my phone normally, It doesn't show sony erricison but only a black screen.
alexwai1996 said:
Please help me
I unlocked the bootloader last night
then I flash the kernel , then the rom
http://forum.xda-developers.com/showthread.php?t=1719746
But when I reboot the play , it stayed in "Sony Ericsson"
then I take off the battery and reboot
Still existing
What can I do?
Click to expand...
Click to collapse
what kernel and rom did you flash?
yukarundeng said:
what kernel and rom did you flash?
Click to expand...
Click to collapse
Well why don't you check the link he posted then you would know what rom he flashed. Simple as that!
Sent from my R800a using XDA App
alexwai1996 said:
Please help me
I unlocked the bootloader last night
then I flash the kernel , then the rom
http://forum.xda-developers.com/showthread.php?t=1719746
But when I reboot the play , it stayed in "Sony Ericsson"
then I take off the battery and reboot
Still existing
What can I do?
Click to expand...
Click to collapse
Did you flash the right kernel for that rom? And when you booted into cwm did you do a factory reset?
Sent from my R800a using XDA App
thatsupnow said:
Well why don't you check the link he posted then you would know what rom he flashed. Simple as that!
Sent from my R800a using XDA App
Click to expand...
Click to collapse
my bad, didnt notice that..
full wipe will do that i think
thatsupnow said:
Did you flash the right kernel for that rom? And when you booted into cwm did you do a factory reset?
Sent from my R800a using XDA App
Click to expand...
Click to collapse
yes i do flash the right kernel.
And i think i did factory reset
However i think i didnt clear the cache.
I'm so careless....
alexwai1996 said:
yes i do flash the right kernel.
And i think i did factory reset
However i think i didnt clear the cache.
I'm so careless....
Click to expand...
Click to collapse
So now the situation is that ,
i try to use a tool to get into recovery as i cant start the OS
and in recovery , i can see :
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
And other parts are okey.
alexwai1996 said:
So now the situation is that ,
i try to use a tool to get into recovery as i cant start the OS
and in recovery , i can see :
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
And other parts are okey.
Click to expand...
Click to collapse
Just flash the firmware from flashtool again then start all over
Remember to do a full wipe when in recovery then clear cache then dalvik cache then install zip from sd card
Sent from my R800i using Tapatalk 2
af230 said:
Just flash the firmware from flashtool again then start all over
Remember to do a full wipe when in recovery then clear cache then dalvik cache then install zip from sd card
Sent from my R800i using Tapatalk 2
Click to expand...
Click to collapse
Which firmware should i flash?
BTW i tryed to flash a 2.3.4 offical HK rom
however it said error ...
alexwai1996 said:
Which firmware should i flash?
BTW i tryed to flash a 2.3.4 offical HK rom
however it said error ...
Click to expand...
Click to collapse
just flash the original firmware with flashtool, then start it all over again without forgetting full wipe (cache and dalvik cache included)
make sure you put the zip file needed into your sd card
and to enter recovery mode
doomlord/keiren = tap back button
cm7/cm9/ICX/MIUI = tap the vol down button
hope that'll help
yukarundeng said:
just flash the original firmware with flashtool, then start it all over again without forgetting full wipe (cache and dalvik cache included)
make sure you put the zip file needed into your sd card
and to enter recovery mode
doomlord/keiren = tap back button
cm7/cm9/ICX/MIUI = tap the vol down button
hope that'll help
Click to expand...
Click to collapse
There's another problem.
When i try to flash the 2.3.4 firmware ,
01/034/2012 09:34:25 - INFO - Flashing system.sin
It suddenly stop at 45% and not moving anoymore.
So what shall i do now......
alexwai1996 said:
There's another problem.
When i try to flash the 2.3.4 firmware ,
01/034/2012 09:34:25 - INFO - Flashing system.sin
It suddenly stop at 45% and not moving anoymore.
So what shall i do now......
Click to expand...
Click to collapse
CAn you give me a link of the offical fireware that should work and fix my phone?
Check the dev section everything you need is over there
Sent from my R800a using XDA App
thatsupnow said:
Check the dev section everything you need is over there
Sent from my R800a using XDA App
Click to expand...
Click to collapse
I try to flash this...
http://forum.xda-developers.com/showthread.php?t=1696233
But .......
It errored.
alexwai1996 said:
I try to flash this...
http://forum.xda-developers.com/showthread.php?t=1696233
But .......
It errored.
Click to expand...
Click to collapse
Try downloading a different ftf file and see if that works any better. Its possible that the download could be corrupted
Sent from my R800a using XDA App
That's it, I present you CWM Based Recovery On-Screen Touch Navigation Controls by Team UtterChaos for our Galaxy 551 :laugh:
I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE BY FLASHING THIS ROM
DOWNLOAD
Code:
You can find it [URL="http://goo.gl/WFr5Q"]HERE[/URL]
Code:
OFFICIAL THREAD [URL="http://forum.xda-developers.com/showthread.php?t=1485829"]HERE[/URL]
Installation
Code:
1. Make sure you have got GingerBread bootloader.
2. Download Odin Multidownloader v4.34 for GT-I5510, Callisto_v1.ops and latest Clockwork Mod Recovery if you do not have them already.
3. Run Odin Multi downloader v4.34 and select the Callisto_v1.ops by clicking OPS button.
4. Select One Package Option and Click One Package button and select the recovery file name (CWM_5.0.2.7_touch_bebek15.tar.md5) file you downloaded.
5. Leave other settings to default (i.e. don’t change any other options/settings)
6. When you are done reboot your phone in download mode (Press Q + Power button to go to download mode)
7. Connect your phone in download mode to your computer via USB Cable.
8. When Odin detects your phone (If you see a com port number written in yellow background at the top left, then your phone is detected. View image.), click Start button.
9. Wait till Odin finishes the job (approx. 5-10 seconds:cool:) and when it reports ‘PASS’, you can disconnect your phone.
Credits
Code:
[B]Team UtterChaos
squadzone
willingmagic
didhiy
yagya
me[/B]
hint: you can't restore nandroid backup from other version of cwm with this.
thanks priyesh103 for this video
Screenshot of CWM touch recovery
look at here,
Just asking, do we need an "Power Off" option on the recoveries?
sometimes a poweroff option is needed....
Sent from my GT-I5510 using xda premium
odin doesn't detect my phone !!
pls share the drivers for win 7 64 bit
help me !!!
can u provide drivers for win7 64 bit
i need to install cwm but odin doesnt detect my phone
pls give me the exact procedure to insall cwm
edit :successfully installed cwm
please help, wrong flashing this cmw cause my phone firmware is froyo, now I can not get to the download mode, try using a usb jig (with resistor 330k ohm) also can not help...
nasyiinhd said:
please help, wrong flashing this cmw cause my phone firmware is froyo, now I can not get to the download mode, try using a usb jig (with resistor 330k ohm) also can not help...
Click to expand...
Click to collapse
same problem here :crying:, any luck in resurrecting it
CWM errors
Hi,
Thanks for the great instructions! I followed them precisely but as I boot to the recovery mode (power+T) I get the following errors nor any commands work in CWM. I even tried to flash the CWM with ODIN again.
CWM-based recovery v.5.0.2.7
E: Can't mount /cache/recovery/Command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Please note that I had a stock Samsung Galaxy GT-I5510 with Android 2.3.6. So I have not rooted my phone in any way. Should I? How can I do it? Thank you for your support!
P.S. As I will get the CWM Recovery to work I will flash CyanogenMod 10.2.
http://forum.xda-developers.com/showthread.php?t=2438393
qrk said:
Hi,
Thanks for the great instructions! I followed them precisely but as I boot to the recovery mode (power+T) I get the following errors nor any commands work in CWM. I even tried to flash the CWM with ODIN again.
CWM-based recovery v.5.0.2.7
E: Can't mount /cache/recovery/Command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Please note that I had a stock Samsung Galaxy GT-I5510 with Android 2.3.6. So I have not rooted my phone in any way. Should I? How can I do it? Thank you for your support!
P.S. As I will get the CWM Recovery to work I will flash CyanogenMod 10.2.
http://forum.xda-developers.com/showthread.php?t=2438393
Click to expand...
Click to collapse
You want to put SD card with CyanogenMod 10.2 and gapps to your phone, then choose option install wipe data/factory reset, install zip from SD card and choose .zip file containing CyanogenMod 10.2, and then install gapps and restart the phone.
Phone doesn't reboot
Hi,
I hope anybody reads this.
I downloaded the .tar.md5 files and proceeded with the instructions.
Though Odin tells me that it's flashing the telephone this is the last message of the log "<1> Close serial port and wait until rebooting."
And nothing happens afterwards. I can only see that the phone switches on again, but the screen stays dark.
Can you help me with anything? I already spent hours because i just tried to get a custom recovery on the phone because I couldn't install CyanogenMod from the SD card.
H4NNE5 said:
Hi,
I hope anybody reads this.
I downloaded the .tar.md5 files and proceeded with the instructions.
Though Odin tells me that it's flashing the telephone this is the last message of the log "<1> Close serial port and wait until rebooting."
And nothing happens afterwards. I can only see that the phone switches on again, but the screen stays dark.
Can you help me with anything? I already spent hours because i just tried to get a custom recovery on the phone because I couldn't install CyanogenMod from the SD card.
Click to expand...
Click to collapse
Which version of odin are you using?
Hi,
It's 4.43
I also started it as administrator and tried different USB-Ports.
What does the .ops file contain? Some register adresses?
H4NNE5 said:
Hi,
It's 4.43
I also started it as administrator and tried different USB-Ports.
What does the .ops file contain? Some register adresses?
Click to expand...
Click to collapse
Try odin 4.34.
.ops file contains partition table of your phone.
So first I flashed the stock firmware back again to be safe that at least it's still working. That was successful.
Ok I forgot to install the GB bootloader, I didn't mention this. But from the links of the first page none is working anymore.
Can you provide me one?
Also now I can't get into the stock recovery anymore with "T + Power".
H4NNE5 said:
So first I flashed the stock firmware back again to be safe that at least it's still working. That was successful.
Ok I forgot to install the GB bootloader, I didn't mention this. But from the links of the first page none is working anymore.
Can you provide me one?
Also now I can't get into the stock recovery anymore with "T + Power".
Click to expand...
Click to collapse
Cwm and stock
Bootloader
Hi kac321,
Thanks but I need the bootloader. I already have the recovery.
H4NNE5 said:
Hi kac321,
Thanks but I need the bootloader. I already have the recovery.
Click to expand...
Click to collapse
Check post #18