Anyone know if the Note 2 will support video out? HDMI or other..
720p if you want to see the phone ui, 1080p in full screen videos.
Via MHL at the resolutions kersh mentions (probably via the Allshare Cast Dongle too).
Probably using the 11-pin adapter used in the S3 I would think, rather than the standard 5-pin MHL adapter.
This one works on my Note. Should work with Note 2 too.
If you need analog - you can use this adapter + this RCA exit-adapter if you have old TV.
Sounds good, thinking about picking one of these up when they hit the stores.
anonymous572 said:
This one works on my Note. Should work with Note 2 too.
If you need analog - you can use this adapter + this RCA exit-adapter if you have old TV.
Click to expand...
Click to collapse
I'm actually expecting that one will NOT work. Samsung went to an 11- rather than 5-pin arrangement for MHL in the S3, meaning that older adapters did not work with the S3, I would expect that they will use the same connection with the Note 2. I would hold off buying an MHL adapter for the Note 2 until it is confirmed one way or the other.
Related
I have Galaxy note 2 tmo usa version.
I tried to use tv out with following item
1) sony bravia xbr9 tv
2) Micro USB to HDMI® MHL Adapter (http://www.monoprice.com/products/p...=10833&cs_id=1083314&p_id=8675&seq=1&format=2)
3) Note 2
4) standard hdmi cabel
I tried to connect but there is no signal on tv. all connection was proper and power was on to tv and the adapter.
I tired to diff hdmi cable - connection between TV and Adapter. but no luck .Also changed hdmi port on tv.
is there specific adapter i need to buy fr note 2 or hdmi cabel?
uhs74 said:
I have Galaxy note 2 tmo usa version.
I tried to use tv out with following item
1) sony bravia xbr9 tv
2) Micro USB to HDMI® MHL Adapter (http://www.monoprice.com/products/p...=10833&cs_id=1083314&p_id=8675&seq=1&format=2)
3) Note 2
4) standard hdmi cabel
I tried to connect but there is no signal on tv. all connection was proper and power was on to tv and the adapter.
I tired to diff hdmi cable - connection between TV and Adapter. but no luck .Also changed hdmi port on tv.
is there specific adapter i need to buy fr note 2 or hdmi cabel?
Click to expand...
Click to collapse
Had the same problem..there was nothing wrong with my connection as I switched to my old GS2 and HTC One S and both worked..
ellac49 said:
Had the same problem..there was nothing wrong with my connection as I switched to my old GS2 and HTC One S and both worked..
Click to expand...
Click to collapse
thanks fr reply. but i didnt get you how to make it work?
The note 2 and the s3 have different hml adapters. You will also need a converter.
On the monoprice link you posted, youll notice ab asterisk next to the s3. Same applies to the note 2.
http://www.monoprice.com/products/p...=10833&cs_id=1083314&p_id=9716&seq=1&format=2
Sent from my SGH-T889 using xda app-developers app
cholepuree1 said:
The note 2 and the s3 have different hml adapters. You will also need a converter.
On the monoprice link you posted, youll notice ab asterisk next to the s3. Same applies to the note 2.
http://www.monoprice.com/products/p...=10833&cs_id=1083314&p_id=9716&seq=1&format=2
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I just got a Samsung HDTV Adapter Tip (5 to 11 Pin) Model EPL-FU10BEBSTD, which has micro-USB female to male; it enabled my TMobile "HDMI connection kit" that had worked with Galaxy S2 Hercules to work now with my Galaxy Note II. The connection kit was expensive, but has a 10' cable from the MHL adapter body to the male micro-usb plug, as well as a 5' cable to the TV HDMI, and a wall charger to power the adapter body. So the arrangement is quite flexible once installed.
I was hoping someone could help me with this problem also. I have a hdmi capable monitor that I would like to hook my note2 up to but for whatever reason the monitor will not detect the signal. i have tried rebooting and connecting it various ways but no dice.
the only thing i can think of is that its the rom im using which is myrom's latest version
Do you have 5pin or 11pin mhl cable? Note2 requires 11pin one.
Sent from my SGH-T889 using xda app-developers app
SolaceKane said:
the only thing i can think of is that its the rom im using which is myrom's latest version
Click to expand...
Click to collapse
I was told you need an S3 cable. Here's the one I use.
http://www.ebay.com/itm/310491287097?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2648
Yea you guys are right you need 11 pin for the note 2. the sgs2 used 5 pin so if you have one for your older phone you need a new one or I think they make a converter too. I would suggest getting right from samsung. it may cost more but you get what you pay for usually and samsung makes the best stuff when it comes to that. Also another thing to consider while you are on samsungs website they have a multimedia dock that is on backorder right now but for a 100 dollars it turns your note2 into a pc basically. It has 3 full size usb ports so you can hook up a mouse keyboard and external hard drive and it has the hdmi port and an auido port so you can hook it up to a hdmi tv/ monitor and multimedia speaker system. I was going to get a new computer but I found this thing. So basically I can have an android desktop. It dont get better than that. Now wit dropbox and mobile odin and this exynos exploit we really dont need to hook up to a pc to root so there is no real reason for it. Just something to think about.
This is really helpful. My question is will this charge your phone while you are connected to the tv? Also, I see some of the description on ebay says it might not work if you are rooted.
safeplayer22 said:
This is really helpful. My question is will this charge your phone while you are connected to the tv? Also, I see some of the description on ebay says it might not work if you are rooted.
Click to expand...
Click to collapse
I am rooted; The MHL/HDMI system works well, if that is your concern. The charger that I use for the MHL adapter is much lower amperage than the one that came with the Galaxy Note 2, so I would guess that charging might be slow if you are watching a movie that way, or maybe not even keep up, but I don't have the patience to do the test (or watch movies that way).
Hmmmm!!!!
I just got the Samsung dock and can't connect with HDMI on rooted stock.
The phone detects the dock and charges up, but no signal to the screen. Also tried hooking it up with the TV and projector using two different custom rom and separate HDMI cables and no dice.
Guess the dock is defective.
hi folks
Is it possible to screen mirror image from my phone (SII 4.0.4 ) to a Samsung 32C5000 TV via LAN ? I'm looking for fomething like screenshare or smartview , btw these do not working with my tv. Allshare doesn;t have any of these options just playing files. It would be really cool to play virtua tennis / nes games with usb controller on the tv.
I'm also interested in this. But I have a Samsung Smart TV Series 8. I have tried searching all over, but I never found a way...
Sent from my GT-I9500 using xda premium
You could just get an mhl cable???
The idea is to use the gamepad in the microUSB port with an OTG adapter so MHL isn't an option. Also wireless offers some form of freedom meaning I'm not limited to using cables.
https://play.google.com/store/apps/details?id=com.dancingpixelstudios.sixaxiscontroller bluetooth ps3 controller and mhl?
Currently I have a Logitech Dual Action which is USB cabled but I am considering about buying that ps3 controller.
Can you tell me what's the difference between these two adapters?
1. www.ebay.com/itm/MHL-Micro-USB-Male...Phone_PDA_Cables_Adapters&hash=item2a1e2ed2ac
2. http://www.ebay.com/itm/New-Black-M..._MobilePhoneDataCables_JN&hash=item41729ff31c
Number 1 looks right
Number 2 is an adapter to turn the s3's micro USB port into an s2's, as Samsung changed the way mhl worked on s3 so you couldn't use s2 mhl cable
Just so you're aware mhl requires stock ROM and the cable must be connected to a power source as well to work.
Hmm ,.I think I'll buy the first but what if I decide to change my phone? Will it work with another Android S3 or maybe some HTC dunno ?
No problem regarding firmware as I am not a fan of custom roms.
The cable won't work on s3 as the cable is 5 pins and s3 is something like 12 but there's adapters available like number 2
Screen mirroring is possible
screen mirroing is capable in phones Galaxy s3 and above and it can be easily ported in galaxy s2 if neatROM develpoers thinks its a worthy feature like they did in feature (Multi - Window) which was also supported in phones Galaxy s3 and above...
Has anyone one bought a micro usb to HDMI adapter that actually work with their tablet? I bought one and did not work so I'm hoping people can recommend a working one. I'm wondering about the MHL 2.0 To HDMI 1080P HDTV Adapter but have not seen any reviews mentioning whether it works on the Note 10.1 2014 edition. Thank you.
Kimo49 said:
Has anyone one bought a micro usb to HDMI adapter that actually work with their tablet? I bought one and did not work so I'm hoping people can recommend a working one. I'm wondering about the MHL 2.0 To HDMI 1080P HDTV Adapter but have not seen any reviews mentioning whether it works on the Note 10.1 2014 edition. Thank you.
Click to expand...
Click to collapse
I am not sure if this option would work. But maybe Google chromecast would be a better solution. Wirelessly send media to TV through your network with it possibly.
Kimo49 said:
Has anyone one bought a micro usb to HDMI adapter that actually work with their tablet? I bought one and did not work so I'm hoping people can recommend a working one. I'm wondering about the MHL 2.0 To HDMI 1080P HDTV Adapter but have not seen any reviews mentioning whether it works on the Note 10.1 2014 edition. Thank you.
Click to expand...
Click to collapse
The Samsung One should Work with this tablet
Sent from my SM-P600 using Tapatalk 4
You'll need an 11 pin MHL connector... We discussed it here.
http://forum.xda-developers.com/showthread.php?t=2480791
And there is a link to the one that I know works.
Dedline said:
I am not sure if this option would work. But maybe Google chromecast would be a better solution. Wirelessly send media to TV through your network with it possibly.
Click to expand...
Click to collapse
chromecast is a great, inexpensive product but very limited compared to allshare or just using hdmi out.
i've rooted my chromecast and put it back in it's box in storage. that's all i've used it for so far.
I'm using the Samsung Galaxy Note 10.1 (2014 Edition) to give lectures (using the LectureNotes app to write during the lectures). I need to be able to connect it to typical VGA projector. Thought it might help others to know what accessories worked to do this:
Samsung MHL to HDMI adapter (model ET-H10FAUWE)
HDMI to VGA + Audio Converter (made by Neet, bought on amazon)
Optional: MoKo Samsung Galaxy Note 10.1 2014 Edition Case - Ultra Slim Lightweight Smart-shell Stand Case
The MHL to HDMI adapter is great. It did not come with a power supply but takes the same micro usb as the Note. It produces a beautiful image on an HDMI display (tested on both 720p and 1080p) and did not require any settings to make it work. In all cases it has worked without needing a power supply - presumably because it is drawing sufficient power from the hdmi port with the devices I have tried. If a power supply is connected it passes through to the Note (charging it if the power supply gives sufficient current). Connecting the adapter makes no impact on the speed of the device. Unfortunately none of our lecture theatres have hdmi connections.
The HDMI to VGA converter needs to be active (so needs power). The "Neet" one above had good reviews from people who had struggled to make this work with other devices. For me it worked straight out of the box. On a 1024 x 768 device it uses the full height of the display but not the full width: ileaves a narrow black band on the right. It is showing the full tablet image which is slightly distorted on the projector screen. The projector detected the display without problems.
For the case, I wanted one that works upside down in landscape mode so the return button is at the top left. This prevents accidentally closing the app while writing on the tablet. It also means the display cables run away from you. You need to switch off the auto brightness on the display because your hand will cover the front camera as you write and so the display will periodically dim - not that this makes any difference to the projector display but is just a distraction when writing.
The alternative method I tried to project the display was using a VNC server. I bought the VMLite VNC Server app. (The developer was very helpful and responsive.) By connecting this to a computer/laptop with a VGA connection, you can project the screen. However the VNC server significantly slowed down the tablet and made writing on the tablet less than pleasant. So I abandoned that in favour of the hardware method above.
Hope this helps someone - though your mileage may vary. (Sorry about the lack of links - not enough posts it seems so I had to strip them out).
you might also consider getting something like this, I tested it a few months back and it worked fine. Need external power , but besides that worked out of the box. Got recognized as a HDMI adapter.
http://dx.com/p/micro-usb-male-to-vga-female-audio-mhl-adapter-cable-for-samsung-htc-white-233333
Dumb question, but how do you supply the power?
Sent from my SM-P600 using Tapatalk
filologen said:
Dumb question, but how do you supply the power?
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Standard Micro USB charger, you can use the one that comes with your Note.
No support of the device for Galaxy Note 10.1 2014
Hello, are you sure that it works for this model of tablet? I tested this microUSB-VGA adapter with the Galaxy Note 10.1 ed 2014 and with 2 Sansung smartphones: Galaxy SIII, SIV, and no VGA neither audio signal is produced.
It worked for me with the one l linked. Tested on note 2014 and s3 both needed ext power
Sent from my GT-I9300 using xda app-developers app
Personally I would eliminate the MHL to hdmi adapter and replace that with the netgear PTV 3000. That paired with the OP's hdmi to vga converter would result in a nice wireless solution so you don't have to be physically tied to the projector.
Sent from my SM-P600 using Tapatalk
just_luc said:
Personally I would eliminate the MHL to hdmi adapter and replace that with the netgear PTV 3000. That paired with the OP's hdmi to vga converter would result in a nice wireless solution so you don't have to be physically tied to the projector.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Have you actually tried the PTV3000 with the 2014 Note? Cause I have and it doesn't work properly, specially when streaming video. For a simple powerpoint presentation it's ok, but nothing more
paraklas said:
Have you actually tried the PTV3000 with the 2014 Note? Cause I have and it doesn't work properly, specially when streaming video. For a simple powerpoint presentation it's ok, but nothing more
Click to expand...
Click to collapse
Worked fine for me but YMMV I guess.
Sent from my SM-P600 using Tapatalk
I recently bought a Galaxy Note 10.1 2014 to use mostly as a business tool, so that I could run presentations and workshops in various locations. I did quite a lot of research about how to do this and finally selected the correct cable, an 11 pin MHL 2.0 micro USB to HDMI cable with a USB to power adapter. I was very disappointed to find out that I could not get the tablet to display on my Sony Bravia TV, but this setup works fine on other non Sony displays in the house such as the Panasonic one I have in my bedroom. Unfortunately this means I cannot reliably use my new tablet as intended in case I encounter a Sony TV or projector when I'm at a venue or on location. I wish I'd known this before I bought my tablet. A device such as a chromecast dongle isn't much use either since I don't always have a Wi-Fi connection.
I have noted that the OP is using an HDMI to VGA cable - does anybody know if this works on Sony displays or is the Sony/Samsung incompatibility universal?
The PTV3000 miracast device does not require separate WiFi connection after the initial setup. This and the Samsung AllShare Cast dongle worked well for me.
Sent from my SM-G900A using XDA Free mobile app
Hi can anyone help? I'm trying to find a HDMI adapter for my tab s2. Samsung recommends the et-h10fauweguj adapter but I've read I need the et-h10fauwegww adapter.has anybody tried any of these and did they work? I've heard aswell that the aspect ratio doesn't quite fit the TV so it has black Bars around the picture. Is that true. Thanks in advance. Mark
markale said:
Hi can anyone help? I'm trying to find a HDMI adapter for my tab s2. Samsung recommends the et-h10fauweguj adapter but I've read I need the et-h10fauwegww adapter.has anybody tried any of these and did they work? I've heard aswell that the aspect ratio doesn't quite fit the TV so it has black Bars around the picture. Is that true. Thanks in advance. Mark
Click to expand...
Click to collapse
I got a fake one that works with Note 4. If it works with Note 4, it will work with the Tab S2. It's also true that you'll see black bars, but if you root and change the device resolution it will work perfectly, but you need to root.
lcmazza said:
I got a fake one that works with Note 4. If it works with Note 4, it will work with the Tab S2. It's also true that you'll see black bars, but if you root and change the device resolution it will work perfectly, but you need to root.
Click to expand...
Click to collapse
My unofficial adapter outputs low resolution 4:3 picture to my 1080p displays, I'm rooted and would love to figure out how to get the appropriate AR/resolution working!
Ubelsteiner said:
My unofficial adapter outputs low resolution 4:3 picture to my 1080p displays, I'm rooted and would love to figure out how to get the appropriate AR/resolution working!
Click to expand...
Click to collapse
Use SecondScreen from the play store.
Worked for me. Good Luck!
MicroUSB to HDMI
I have a Galaxy Tab S2 (SM-T815NZWENEE ) which I am trying to connect it to a TV with an HDMI cable.
I have the ET-H10FAUWESTA (original Samsung) MicroUSB - HDMI adapter and when I plug in a HDMI-VGA adapter, I can display screen through a projector.
As soon as I plug in a HDMI cable instead of the VGA adaptor and connected it to a TV there was no picture.
I looked at Chromecast or other wifi dependent methods is not an option
Any ideas?
pmenzies said:
I have a Galaxy Tab S2 (SM-T815NZWENEE ) which I am trying to connect it to a TV with an HDMI cable. I looked at Chromecast or other wifi dependent methods is not an option
Click to expand...
Click to collapse
@pmenzies ... I connect my Chromecast directly to the TV with HDMI connector. Works perfectly with my S2 T810.
pmenzies said:
I have a Galaxy Tab S2 (SM-T815NZWENEE ) which I am trying to connect it to a TV with an HDMI cable.
I have the ET-H10FAUWESTA (original Samsung) MicroUSB - HDMI adapter and when I plug in a HDMI-VGA adapter, I can display screen through a projector.
As soon as I plug in a HDMI cable instead of the VGA adaptor and connected it to a TV there was no picture.
I looked at Chromecast or other wifi dependent methods is not an option
Any ideas?
Click to expand...
Click to collapse
I think the Tab S2 don't have the MHL connection as the Note 4 (look in the Specs at the Connectivity topic) .
My Note 4 works but my new TaB A 10.1 doesn't. With MHL feature you can connect your MicroUSB - HDMI adapter and plug in the TV. To connect the Tab S2 mostly use the Chromecast device or Ezcast device (Miracast).
WiFi Direct could work with some smart TVs.
Edit: Surprise me that http://www.gsmarena.com/samsung_galaxy_tab_s2_9_7-7438.php shows : USB microUSB v2.0 (MHL TV-out)
But Samsung web site doesn't show MHL in specs like it shows for Note 4 smartphone.
lcmazza said:
I got a fake one that works with Note 4. If it works with Note 4, it will work with the Tab S2. It's also true that you'll see black bars, but if you root and change the device resolution it will work perfectly, but you need to root.
Click to expand...
Click to collapse
How do you do this ?
Plase let us know, this would add so much more functionality to the tab.