ROM Control different 'profiles' on AOKP - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Is there a way to set different voltages and MHZ values on two different 'profiles' ie battery saving (regular everyday use) vs performance (streaming hd movies) using Rom Control on AOKP?

I recommend flashing ktoonsez kt747 aosp kernel if your going to be undervolting. Then in ktweaker you can save and load voltage setting profiles.

i'm on that kernel right now. no option. to be fair i haven't updated since mid august.

zetsui said:
i'm on that kernel right now. no option. to be fair i haven't updated since mid august.
Click to expand...
Click to collapse
ktweaker was added around build 8/30.

If you are still on an old kernel try out setcpu.
Sent from my SGH-I747 using xda premium

d3athsd00r said:
If you are still on an old kernel try out setcpu.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
SetCPU profiles are exactly what I wanted...but that doesn't seem to be the case with the tkoonsez rom and kernel? Or is that not the case anymore? When I used it a while back I remember specifically reading NOT to use SetCPU

You can always try system tuner in the play store
Sent from my SGH-I747 using xda app-developers app

Related

Fauxclock

I know there have probably been hundreds of threads about this but I can't find them so I'm starting another one. What is faux clock? Is it a kernel or script or what? And what does it do?
Sent from my SGH-T989 using XDA
hiz99 said:
I know there have probably been hundreds of threads about this but I can't find them so I'm starting another one. What is faux clock? Is it a kernel or script or what? And what does it do?
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
It's an app developed by Romanbb that enables you to OC/UC your speeds and undervolt your voltages, look in the faux kernel thread for additional reference, here is the link:
MODERATOR EDIT - LINKS REMOVED
Do I flash it through cwm or what?
Sent from my SGH-T989 using XDA
Fauxclock from my experience is horrible. I have had it on multiple roms and every time I set it on boot and come back in to the app it auto changes the settings to max on low and high and make my phone reboot because the processor is maxed out all the time. I have tried downloading the latest version over and over again and have other things. I don't recommend it till it comes out with another version.

Blazer 4.1 Kernels

What kernels are people using when running Blazer 4.1? I'm using the FC24 modem as well.
Im using the stock one that came with it. EL29. Everything working so smooth, no need to change it.
bds120 said:
Im using the stock one that came with it. EL29. Everything working so smooth, no need to change it.
Click to expand...
Click to collapse
Yeah I have no complaints, mine is running smooth as hell as well. Was just wondering if there are any kernels out there that are worth flashing.
I am running rogue 1.4.1 OC'd to 1400 and all is fast and stable as hell! Battery has been awesome too...
ROM: Blazer v4.1
Kernel: 2.6.35.14-rogue_ET-1.4.1+ http://forum.xda-developers.com/showthread.php?t=1341564
Modem: FC24 http://forum.xda-developers.com/showthread.php?t=1352310
Theme: Dark Fire Blue X v2.1.1 http://forum.xda-developers.com/showthread.php?t=1427215
PRL: 11115 http://forum.xda-developers.com/showthread.php?t=1267893
Sent from my SPH-D710 using xda premium
Using rogue as well 1.4.1 underclocked and undervolted. Even better battery life
Sent from my iPhone killer.
CyberpodS2 said:
I am running rogue 1.4.1 OC'd to 1400 and all is fast and stable as hell! Battery has been awesome too...
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Rule of thumb for xda. If you are going to mention a kernel you like it is good etiquette to also provide a link to it.
http://goo-inside.me/kernels/TeamRogue/E4GT-/Gingerbread/Source_Built/rogue_ET-1.4.1-gunslinger-cwr.zip
Sent from my SPH-D710 using Tapatalk
Thanks for the link... I kept getting fc's when using the copy URL function in the xda pro app. I was just waiting to get to a PC to fix the post. All is updated now.
Sent from my Epic 4g Touch running Blazer 4.1 using xda premium
Rogue UC'd with SetCPU profiles
For some reason the Gunslinger kernel just does NOT like my phone. Every time I have tried it my phone overheats and crashes. Oh well, others swear by it. Each phone is different.
I_FLY_Z3R0 said:
Using rogue as well 1.4.1 underclocked and undervolted. Even better battery life
Sent from my iPhone killer.
Click to expand...
Click to collapse
No lag then?
What are exact settings for it and what app are you using to do that... SetCPU?
Sent from my SPH-D710 using xda premium
nibrwr said:
Rogue UC'd with SetCPU profiles
Click to expand...
Click to collapse
What are your exact SetCPU settings?
Sent from my SPH-D710 using xda premium
alwaysbelieve1 said:
What are your exact SetCPU settings?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I'd like to know the settings as well.
I use Calk's UV script from 3.0. SetCPU in screenshots.
Edit: don't know what happened there. Screens won't show.
Running 1200/200 conservative.
Undervolted using Calk's script from 3.0.
Profiles (in order of priority): Screen off=500/200, Battery <60%=800/200, Battery <80%=1000/200.
Governor: Sampling rate=35000, SDF=1, Up Threshold=85, Down Threshold=35
nibrwr said:
I use Calk's UV script from 3.0. SetCPU in screenshots.
Edit: don't know what happened there. Screens won't show.
Running 1200/200 conservative.
Undervolted using Calk's script from 3.0.
Profiles (in order of priority): Screen off=500/200, Battery <60%=800/200, Battery <80%=1000/200.
Governor: Sampling rate=35000, SDF=1, Up Threshold=85, Down Threshold=35
Click to expand...
Click to collapse
What's with the Governor settings? I'm new to setcpu and I'm curious.
Here's some info on governors:
http://setcpu.com/documentation_mobile.html#governor
If you do a Google search, you'll find some good explanations of each setting
mitchellvii said:
For some reason the Gunslinger kernel just does NOT like my phone. Every time I have tried it my phone overheats and crashes. Oh well, others swear by it. Each phone is different.
Click to expand...
Click to collapse
No crashes, but it definitely doesnt like my phone either.
nibrwr said:
I use Calk's UV script from 3.0. SetCPU in screenshots.
Edit: don't know what happened there. Screens won't show.
Running 1200/200 conservative.
Undervolted using Calk's script from 3.0.
Profiles (in order of priority): Screen off=500/200, Battery <60%=800/200, Battery <80%=1000/200.
Governor: Sampling rate=35000, SDF=1, Up Threshold=85, Down Threshold=35
Click to expand...
Click to collapse
Where is the script and what do I need to do? I did not see the options to set up that app like you mentioned. Your numbers are not conducive to what is available.
Sent from my SPH-D710 using xda premium
Ttrain721 said:
What kernels are people using when running Blazer 4.1? I'm using the FC24 modem as well.
Click to expand...
Click to collapse
I'm using the gunslinger kernel....undervolted using set cpu everything runs smooth and great battery life
Sent From My SAMSUNG GALAXY S II
The UV script is in /system/etc/init.d. You need the paid app to unlock all SetCPU settings. You'll find the app for free on XDA
alwaysbelieve1 said:
Where is the script and what do I need to do? I did not see the options to set up that app like you mentioned. Your numbers are not conducive to what is available.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Here's a link to the uv script: UV Script

Franco kernel?

I just flashed the Franco kernel. Its pretty dang smooth. I think I'll enjoy it and since it is my first kernel on any device I'm very impressed to see the difference between this and stock.
My question is how do I actually use the kernel? I've got setcpu so I believe the first step is done. I know how to use it to over clock, but what about voltages?
How do y'all have it set up?
Sent from my Galaxy Nexus using xda app-developers app
Stock Franco
You can control your kernel with the franco kernel updater app or with terminal commands. Setcpu will indeed also allow to control parts of the kernel's functionality.
As for undervolting: differs per device. Try values that work for you and don't set them on boot before you know they are stable (prevent bootloops). Also, do a bit of reading on smartreflex voltage calibration.
Sent from my Galaxy Nexus using Tapatalk 2

jokers kernels 3/8/13

Disclaimer: Not stock stuff, brick risk. Phone explodes, etc etc!
JB kernels
Stock kernel -
Plain ol stock
stock optimized -
Built with 4.7 compiler along with krait/snapdragon optimizations.
-the compiler lg uses cant build for krait due to it being old. I fix it.
Stock Optimized with battery fixes - coding
icssource
jbsource
thanks
thalamus
motley
faux123
more later
ICS Kernels
Stockish
Stockish v1
Code:
Added code aurora wakelock fixes for msm hsic along with some fixes from faux123
addd optimized AES and SHA1 routines
updated lzo compression
tweaked deadline
use glibc version of memcopy and string
modified makefile for more optimized compiling(incomplete)
-added pipe
-changed O2 to O3
-modified cpu config to build for neon and ftree-vectorize optimizations
changed vfp from softvfp+vfp to neon
added usb fast charge support if ma=1000+ (most are 500)
Use get_random_int() to implement AT_RANDOM while avoiding depletion of the entropy pool.
increased readahead to 2048
added mmc tweaks and fixes
Other stuff i forgot.
Stockish v2
Code:
Change HSIC reset sequence
Modified touch screen for better response
more wakelock code changes
Sysfs UV code for more control
Many tweaks I'll have to update when I get home.
stockishv2.1.1
Code:
Modified slave cpus to follow the 0 core max clock,(fix for only 1 cpu underclocking in stock kernel)
added oc code framework for testing
added init.d for loki support
Stockish will discontinue soon, once i get rid of qualcomms mpdecision and make enough code changes
Overclocking kernels -v2.11
mocv2.1.1 - oc'd to 1.62 may not work for everyone
bocv2.1.1 - oc'd to 1.8 may not work for everyone
Same as stockish but with oc/uv code.
Test everything. post results. If you wish to flash this. also wipe dalvik and cache
also mine
Woooo can't wait to see some awesome jellybean kernels
Sent from my LG-LS970 using Tapatalk 2
Nice!
So far stock optimized is very nice! Well done
Look forward to flashing this tonight. You rock!
Sent from my LG-LS970 using xda app-developers app
Ok since we are now on 3.4 i plan to go full swing on this kernel and fix a ton.
Major issues include
Msm_hsic_host wakelocks- this wakelock happens on both wifi and 3g, essentially it stays on and keeps the kernel from sleeping after data use is done. It cant really be completely fixed but it can be greatly reduced. However there is a draw back, this process if improperly fixed will cause data issues. So report report report that way i can revert patches that cause data issues.
Wifi cutting off during deep sleep/random cutoffs- issue with 4.0+ android and arp offload bugs
Gps issues
Heat issues
Mpdecision issues with racing, unneeded extra cores running, stuck on 1ghz, etc
3g random cutting off
Graphic issues- tearing, full buffers, unneeded reloads after rotate, scrolling buffer issues, home reload after rotate, video codec issues, etc
Memory leaks - common with all software, but its nice to seal some up.
Linux kernel issues in 3.4.0- might as well fix some of these too.
Also i plan to add some neat features into one of the branches. Obviously undervolting, but others may include sweep2wake and other nice stuff.
Sent from my LG-LS970 using xda app-developers app
Flashed optimized this morning...so far so good. Is the thermal mod ok to use with this? I installed that file earlier this week.
Awesome, running smoothly...
THANKS!
Any chance youre working on an overclock 3.4 kernel to use with ZVB?
evodev said:
Any chance youre working on an overclock 3.4 kernel to use with ZVB?
Click to expand...
Click to collapse
Overclock? Smdh :banghead: lol
Sent from my LG-LS970 using xda app-developers app
No reason for an overclock. After a few minutes of a game the phone gets hot and throttles down to 1.2, and you don't even notice. An underclock/undervolt kernel would be more beneficial.
Sent from my LG-LS970 using xda premium
Barshalen said:
No reason for an overclock. After a few minutes of a game the phone gets hot and throttles down to 1.2, and you don't even notice. An underclock/undervolt kernel would be more beneficial.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
I agree. Undervolt would be beneficial but I'm a wuss and get nervous doing that.
Sent from my LG-LS970 using xda app-developers app
JeauxAdam said:
I agree. Undervolt would be beneficial but I'm a wuss and get nervous doing that.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
I'm pretty sure it's safer to undervolt than overclock seeing as there's more of a potential to overvolt and destroy the device in the process of overclocking as opposed to losing some software related functionality/potential to cause system instability related to undervolting if that's what's causing your nervousness
Sent from my LG-LS970 using xda premium
evodev said:
Any chance youre working on an overclock 3.4 kernel to use with ZVB?
Click to expand...
Click to collapse
+1 I would love to see overclock.
scottndville said:
Overclock? Smdh :banghead: lol
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Barshalen said:
No reason for an overclock. After a few minutes of a game the phone gets hot and throttles down to 1.2, and you don't even notice. An underclock/undervolt kernel would be more beneficial.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
JeauxAdam said:
I agree. Undervolt would be beneficial but I'm a wuss and get nervous doing that.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
hoslayer13 said:
I'm pretty sure it's safer to undervolt than overclock seeing as there's more of a potential to overvolt and destroy the device in the process of overclocking as opposed to losing some software related functionality/potential to cause system instability related to undervolting if that's what's causing your nervousness
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Maybe you guys should go check out faux123 kernels for the n4 if the right governors are used then OC is not that bad. I would love to see some of the tweaks faux123 made brought in to our kernels.
Either way keep up the great work joker!!!!
beezy420 said:
+1 I would love to see overclock.
Maybe you guys should go check out faux123 kernels for the n4 if the right governors are used then OC is not that bad. I would love to see some of the tweaks faux123 made brought in to our kernels.
Either way keep up the great work joker!!!!
Click to expand...
Click to collapse
Already planned out.
Sent from my LG-LS970 using xda app-developers app
hoslayer13 said:
I'm pretty sure it's safer to undervolt than overclock seeing as there's more of a potential to overvolt and destroy the device in the process of overclocking as opposed to losing some software related functionality/potential to cause system instability related to undervolting if that's what's causing your nervousness
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
I know I shouldn't be a wuss about it since you can have settings revert back after rebooting. I just don't have a lot of experience with it.
Sent from my LG-LS970 using xda app-developers app
JeauxAdam said:
I know I shouldn't be a wuss about it since you can have settings revert back after rebooting. I just don't have a lot of experience with it.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Dont set on boot if youre worried
Sent from my LG-LS970 using xda app-developers app
Been running got a couple days now. Seems solid. Great work.

Neighborhoodhacker's Kernel: 3.4 CM based Kernel w/ Overclock and more

This is a kernel I have made based off of the Gproject kernel for CM.
Features:
10/25
Added wheatley and smartmax governors. As many TCP congestion options as one could ask for. A couple other small things.
10/24-4
Fix CM compatibility break. Bye bye LSD effect
10/24-3
The kernel package is now using an implementation of koush's anykernel.
I suggest for those who are having any issue to flash back to their ROM image (don't delete data). Then reflash using this. It uses the ramdisk already present on the device so it might break less things
10/24-2
Reset the GPU min freq to stock so that we don't lose battery
10/24
GPU OC extended for to 585Mhz. Woot woot.
10/23
1.89Ghz if you dare MWAHAHAHA
10/22
162Mhz was a little bit hopeful so I got rid of the frequency because without that we seem to lose the HW resets. Overclock still seems to work fine Antutu 20200.
10/21
Overhauled the CPU frequency range. We now have stable OC to 1.81 and UC to 162Mhz. Depending on the application you can toy with intellithermal settings to get the best performance from that situation.
Edit: not so stable at 1.81 I lied go for 1.72 for now (always forced to eat my words)
10/17
Quite a few changes. We have an updated wifi driver as well as an updated graphics driver. I added gamma control. Simple GPU governor is now set to default for battery savings and by that one can imply obviously it is working now. FIOPS scheduler added. A few minor things.
9/30-2
removed knock knock by farbuggy
9/30
Okay so I am really really really hoping this one rids SOD's good. Also I added a knock on interface. Until it gets implemented into the systemui of a rom though it will only work while screen is off. (It's a work in progress and the knock on ability is disablable though the file /sys/kernel/knock_knock/knock_knock_enabled[1 = on, 0 = off]) This I believe is the first custom kernel to have any kind of knock on type interface. So far it's just been made up for by showp-1985's s2w.
9/29
Tweaked undervolt so hopefully we can say goodbye to SOD's. I have had success with lower settings but this should cover a broader base. If anyone get's an SOD with these settings, let me know and I will update the kernel ASAP.
9/28
Added undervolt by default and faux123 mako's implementation of sweep2wake. It doesn't show in tricksters mod but you can turn it on and off in sysfs through the file /sys/kernel/s2w_parameters/s2w_switch. (1 = on, 0 = off)
9/27
Ummm let's see... Today we got: GPU Overclock to 487Mhz, intelli-thermal from faux123, and a couple little things here and there .
Edit: I added a little more there is now an adjustable voltage table and the phone defaults with intelliplug and intellithermal
9/26
Intellidemand doesn't control hotplugging anymore. That functionality is moved to intelliplug. I think we have hotplugging and performance now let me know all! (mpdecision still enabled by default, go to trickster and see the new additions )
9/25
Faux sound control.
Intellidemand. (mpdecision should be turned off to utilize this feature properly)
Extended CPU frequency range (192Mhz - 1728Mhz)
Download Links:
Now on codefi.re female dogs!
http://fs1.codefi.re/neighborhoodhacker/
Old links:
10-22-2013
10-21-2013
10-17-2013
9-30-2013-2
9-30-2013
9-29-2013
9-28-2013
9-27-2013
9-26-2013
9-25-2013
And, of course, my GPL/XDA compliant github.
XDA:DevDB Information
[KERNEL]Neighborhoodhacker's Kernel, a Kernel for the Sprint LG Optimus G
Contributors
neighborhoodhacker
Kernel Special Features:
Version Information
Status: Stable
Created 2013-09-26
Last Updated 2013-11-02
Downloading ... I've been hearing your name around the forums so this has to be good.. Thanks for your hard work
Dude excellent work on this. Have it flashed and intellidemand is an awesome addition. Thanks for your hard work, I'll let you know if I run into anything.
Sent from my LG-LS970 using xda app-developers app
Thanks for the kind words gentlemen let me know of any issues definitely
Sent from my LG-LS970 using XDA Premium 4 mobile app
Edit: also please excuse the edify text. I didn't get around to editing that yet
I'm having major speed issues. My overclock used to work so much better. Something keeps forcing the CPU down. Idk what it is....
Sent from my LG-LS970 using XDA Premium 4 mobile app
Any projections on what this should do for battery? Is it likely to improve battery life or improve performance?
Thanks for the hard work.
Sent from my LG-LS970 using Tapatalk 4
Is undervolting possible with this kernel?
Sent from my LG-LS970 using Tapatalk 4
neighborhoodhacker said:
I'm having major speed issues. My overclock used to work so much better. Something keeps forcing the CPU down. Idk what it is....
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maybe it has something to do with MPDecision or temp throttling? I know in the past I've seen other kernels have some issue at first with fully disabling it, causing it to continue to interfere with some settings.
Awesome work..... With faux
Thank you for cooking it
neighborhoodhacker said:
I'm having major speed issues. My overclock used to work so much better. Something keeps forcing the CPU down. Idk what it is....
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm not an expert on governors but with intellidemand (on our other roms) my optimal freq and sync freq were usually like 702mhz. Stock this kernel puts it at 192mhz. Correct me if I'm wrong, I'm not sure what these fields even mean. I'd like to know if anyone has any info.
I'm running the kernel anyway and so far so good. Thank you NeighborhoodHacker for this great kernel.
edit: I just tested Asphalt 8 and so far this kernel holds frame rates really well!! I don't if I was doing something wrong before, but for the longest time this game was unplayable for me.
mobius1484 said:
Maybe it has something to do with MPDecision or temp throttling? I know in the past I've seen other kernels have some issue at first with fully disabling it, causing it to continue to interfere with some settings.
Click to expand...
Click to collapse
So you think I might have to pull mpdecision out of the kernel? Uggg I was afraid of that.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Mightve messed with trickster too much, but after flashing I ran antutu, bricked
Sent from my N850 using xda app-developers app
Maestertk said:
Mightve messed with trickster too much, but after flashing I ran antutu, bricked
Sent from my N850 using xda app-developers app
Click to expand...
Click to collapse
Ummmm try wiping cache/dalvik/ I highly doubt you are anything but slightly softbricked.
Having great success with with newest kernel. I even got an antutu of over 19000 with a hotplugging driver enabled! I'm pretty happy so I hope your guys experieces will mirror mine.
Well originally I ran antutu, then the phone went off, and notification light and capacitive lights flashed. I couldn't access recovery do I attempted a lgnsp. Now it won't even charge or turn on
Sent from my N850 using xda app-developers app
I assume this is a4.3 compatible kernel? Work with PAC man?
Sent from my LG-LS970 using xda app-developers app
Maestertk said:
Well originally I ran antutu, then the phone went off, and notification light and capacitive lights flashed. I couldn't access recovery do I attempted a lgnsp. Now it won't even charge or turn on
Sent from my N850 using xda app-developers app
Click to expand...
Click to collapse
All you had to do was wipe caches after your cash. Since you ran out your battery you made things so hard on yourself
Sent from my LG-LS970 using XDA Premium 4 mobile app
Also if you want good performance and hotplugging go to tricksters mod enable intelliplug and temperature throttle
Sent from my LG-LS970 using XDA Premium 4 mobile app
JeauxAdam said:
I assume this is a4.3 compatible kernel? Work with PAC man?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Should be
Sent from my LG-LS970 using XDA Premium 4 mobile app
Well now I feel silly lol thanks for the pointers though!
Sent from my N850 using xda app-developers app

Categories

Resources