Background:
I ordered the XGear Spectre Tempered Glass Screen protector back on August 16th (1st Version). Upon receiving it I noticed the infamous dots (which didn’t bother me really), the rainbowing and most annoying of all, the proximity sensor issue. Since then the protector has gone through 2 revisions, I will be talking about the latest one. I dealt with the very first one for about 5 days and finally I got fed up and took it off because I couldn’t end a phone call in the dark without holding it directly in front of a light or pulling the battery.
Pics of first version notice small dots for proximity sensor:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Shortly after returning the XGear product, Spigen released their Glas screen protector which is very similar, they actually cut out the glass and also use clear glass around the “SAMSUNG” logo so it shows through (nice touch) also they include bumpers to raise up your home button (its still recessed but the colors match, Im using the white screen protector on a blue phone). However theirs is plagued by an insensitivity on the screen, as if it doesn’t sit perfectly flush, the only complaint but a HUGE ONE. I use swift key for those curious and I had to slow down my text speed to a hunt and peck method basically. They finally acknowledged the fault in their product and I am in the process of getting a refund.
Spigens version (notice "SAMSUNG" is "cut out" on theirs:
Unboxing:
After unboxing the newest iteration of the XGear Spectre I immediately noticed that the proximity sensor is now a cutout in the glass per se, its actually still covered but its all clear now instead of two small holes, also there are no dots on it what-so-ever.
Installation:
I installed it in a steamed room to calm the dust and after doing this about 3 times ive learned how to apply it near flawlessly.
Results:
I can say that so far I am more then pleased with the protector. There are NO sensitivity issues (Im back to texting full speed), NO proximity sensor issues (Tested in a dark room, called myself from the my home phone, proximity sensor worked flawlessly), there are NO dots (looks like a solid piece of glass) and there is NO rainbowing. I recommend this one over Spigen's.
Another small tidbit, XGear’s protector actually covers more of the screen. It may be difficult to see in the pictures but it almost touches my Spigen case, whereas the Spigen screen protector left a few millimeters all the way around (not a huge deal but something I thought I would mention because I prefer it covering as much of the screen as possible).
Final XGear Spectre:
Thanks again pmoradi2002 for giving me one of the first looks at this newest Spectre.
so with the spectre brand redone one is there any issues at all? I'm so fed up with these flimsy screen protectors and polyuerathane(?) types.
Thanks for the comparison. Waiting for the revised pebble blue to be released.
So they have this new rev.2 product in stock? I was going to order one but noticed the product images are still rev.1
Sent from my GT-I9300 using Tapatalk 2
zen0s said:
So they have this new rev.2 product in stock? I was going to order one but noticed the product images are still rev.1
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
The white is already out and they said it will be a few weeks before the blue will be available.
http://forum.xda-developers.com/showthread.php?t=1792619&page=45
---------- Post added at 09:58 PM ---------- Previous post was at 09:54 PM ----------
Look at the post from "pmoradi2002"
The new spectre looks great, from the picture facing top of it , looks just like a white s3. Where can we order the new ones? DId it come with the home button or was that from your old one?
Thanks man! Just ordered one from amazon I can't wait to get it.
http://www.amazon.com/XGear-Spectre...&qid=1347682313&sr=8-1&keywords=spectre+xgear
Sent from my GT-I9300 using Tapatalk 2
Any problems accessing the home button? Does it still sit flush or was there a sticker included like the ones from Spigen?
Sent from my SGH-T999 using xda app-developers app
Just got a new puregear px260 case and was wondering if it would work with this screen protector? It covers the edges of the phone on the front around the screen and screws together. Didn't know how much thickness it added. Thanks
Sent from my SCH-I535 using Tapatalk 2
Great review and really nice photos.
I'll definitely give this a go for the second time after I see a few more users opinions of it.
Thanks again!
Sent from my SGH-I747M using Tapatalk 2
I forgot to ask, do you have any problem taking screenshot with palm swipe gesture? With SGP GLAS I have to press pretty hard to get it working.
Sent from my GT-I9300 using Tapatalk 2
Because it needed it :good:
Email to xgear for BLUE
Message:
*I am interested in the Spectre Tempered Glass Screen Protector For Samsung Galaxy S III in Blue.
Is the one you currently sell the v3 with proximity sensor and no dots?
Reply:
Thank you for contacting us, the Pebble Blue Spectre that is currently offered does not have any proximity sensor issues, however it does contain the dots. We will be releasing a new version within the next week or two
yoyoche said:
Email to xgear for BLUE
Message:
*I am interested in the Spectre Tempered Glass Screen Protector For Samsung Galaxy S III in Blue.
Is the one you currently sell the v3 with proximity sensor and no dots?
Reply:
Thank you for contacting us, the Pebble Blue Spectre that is currently offered does not have any proximity sensor issues, however it does contain the dots. We will be releasing a new version within the next week or two
Click to expand...
Click to collapse
Hey I just sent that!
littleguevara said:
Shortly after returning the XGear product, Spigen released their Glas.t screen protector which is very similar, they actually cut out the glass and also use clear glass around the “SAMSUNG” logo so it shows through (nice touch) also they include bumpers to raise up your home button (its still recessed but the colors match, Im using the white screen protector on a blue phone). However theirs is plagued by an insensitivity on the screen, as if it doesn’t sit perfectly flush, the only complaint but a HUGE ONE. I use swift key for those curious and I had to slow down my text speed to a hunt and peck method basically. They finally acknowledged the fault in their product and I am in the process of getting a refund.
Click to expand...
Click to collapse
wait, they do have the Glas.T or just the Glas? I am getting so darn confused! I can't find the .T anywhere!
pmoradi2002 said:
Hey I just sent that!
Click to expand...
Click to collapse
What about RED? or any colors. ETA?
pmoradi2002 said:
Hey I just sent that!
Click to expand...
Click to collapse
Yes you did that was me. Thanks
Paramount X said:
What about RED? or any colors. ETA?
Click to expand...
Click to collapse
Red will be 1-3 weeks.
Would also like to say that i decided to get this over spigen because of this review
If we buy directly from the website, it shows the earlier version, with the small holes, if we get it through the site, is it going to be the newest version, lets say V3?
Thanks,
JP
Related
FYI - Spigen's long-awaited Curved Crystal screen protector is now available at Amazon for $16 with free shipping, but won't actually be in stock until August 9th, so with 2-day shipping (Prime) it'll be in my hands by next Monday.
EDIT: Back In Stock again (Aug 9)
I've gone through three crappy screen protectors already:
1) SGP Ultra Crystal (dry; discontinued due to edges peeling up; returned it; curved crystal fixes it)
2) Skinomi (wet; TPU case peeled the edges up; feels funny)
3) Incipio's free protector that comes with their Silicrylic DualPro case (dry; oily-looking; peeling up at the edges and there's gunk under it already)
Comes with 2 in the pack. Can't wait to finally replace my cheapo protector with this full-coverage glassy-feeling version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please let us know what this is like to install. I dread installing just flat ones always getting bubbles and dust...
i wonder if my tpu case will peel it off when you remove it or put it on
Sent from my SPH-L710 using xda premium
w4d3 said:
Please let us know what this is like to install. I dread installing just flat ones always getting bubbles and dust...
Click to expand...
Click to collapse
If you use the hinge method (two pieces of tape) to apply it, then it should only take one attempt to put on perfectly, limiting the amount of time for dust to drift under it to a minimum.
"Currently Unavailable"
msgnyc said:
"Currently Unavailable"
Click to expand...
Click to collapse
http://www.spigen.com/cell-phone/sa...creen-protector-steinheil-curved-crystal.html
I know I can order straight thru Spigen, but the topic says they are now available at Amazon while Amazon says they are not available... Thank you tho.
Hell even the OP says they aren't available now as the title says... misleading, topic is misleading.....
zmore said:
If you use the hinge method (two pieces of tape) to apply it, then it should only take one attempt to put on perfectly, limiting the amount of time for dust to drift under it to a minimum.
Click to expand...
Click to collapse
Wouldn't the hinge method be hard to use, since this is a curved cover?
msgnyc said:
I know I can order straight thru Spigen, but the topic says they are now available at Amazon while Amazon says they are not available... Thank you tho.
Hell even the OP says they aren't available now as the title says... misleading, topic is misleading.....
Click to expand...
Click to collapse
It was available for buying when the OP posted it. When I checked it last time, it said 9 in stock. So it went out of stock later on. Not OP's mistake.
Just ordered one off of the SGP website. Can't wait to get it!
By the way, does anyone else think the display on the S3 is WAY smoother than the S2? Without a screen protector I mean.
VirtuaPirate said:
It was available for buying when the OP posted it. When I checked it last time, it said 9 in stock. So it went out of stock later on. Not OP's mistake.
Click to expand...
Click to collapse
My apologizes to the op then. Was out when I checked about an hour after he posted it.
I've been looking for a screen protector with this type of cut out for the speakers and home button for the longest time.. If only it covered the camera too
Powered by Samsung Galaxy S3 via Tapatalk2
I've been hearing a lot of bad news lately about the quality of sgp cases and protector. Hope you can make a review once you got yours
Sent from my GT-I9300 using xda app-developers app
lee.asid said:
I've been hearing a lot of bad news lately about the quality of sgp cases and protector. Hope you can make a review once you got yours
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I love my Ultra Nano Clear and can barely see its even on there. Only reason its noticeable is because its cut short so at angles u can see the edges. Just wish the it covered the whole screen like this one does.
I've never had issues with Spigen screen protectors in the past, but I can't speak for the quality of their cases. I'm not a fan of cases in general. Only reason I've got one on my SIII is to hide the purple..... XD
Can anyone comment as to whether a case will cause the edges of this protector to lift?
Powered by Samsung Galaxy S3 via Tapatalk2
Any insight into the clarity of the screen afterwards? I am looking to really get away from the rainbow grain effects of this otterbox built in protector.
Sent from my SAMSUNG-SGH-I747 using xda premium
If its anything like their Ultra Nano Clear which I'm hoping it is, its crystal clear and you'll only notice its there because of the slight visible edge from the cutouts around the speaker, camera and home button.
I kind of wish they covered the camera and only cut out the speaker n home button tho.
msgnyc said:
If its anything like their Nano Ultra Clear which I'm hoping it is, its crystal clear and you'll only notice its there because of the slight visible edge from the cutouts around the speaker, camera and home button.
I kind of wish they covered the camera and only cut out the speaker n home button tho.
Click to expand...
Click to collapse
This is if you have the white SGS3. If you have the blue one, the screen protector is very noticeable.
ComradeNF said:
This is if you have the white SGS3. If you have the blue one, the screen protector is very noticeable.
Click to expand...
Click to collapse
Are you referring to this new curved crystal from spigen? If so that's slightly disappointing. Makes some sense tho since the U.N.C. is thinner while this one is supposed to be slightly thicker which would make the edges around the cam, speaker n home stand out more.
I do have the Pebble "Purple" GS3 btw. lol
My current screen protector (U.N.C. not this new one yet) is only noticeable around the edges. I can see the edge line. Aside from that line, the covered area looks identical to the non covered areas. Sometimes I can't even tell its there at all.
seonny said:
Can anyone comment as to whether a case will cause the edges of this protector to lift?
Powered by Samsung Galaxy S3 via Tapatalk2
Click to expand...
Click to collapse
I have a Nillkin case and do not have this problem. There is some clearance between the edge of the protector and the edge of the screen but I think it'll depend on what case you have.
AHHHHHHHH Im so excited!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Alright here are some few pictures of it. I dont have the best camera in the world since I never had the reason to buy one so I apologize ahead of time.
Package contents
Note: It does include 4 colors home button for your choosing
Here is the tempered glass fully applied. If you look closely it doesnt fully cover the ENTIRE phone screen. It does leave 0.2ish cm space gap. It does have holes punched for the proximity sensors/LED display/FFC
Spacing and thickness
Another one
Sucky ass camera does not do this justice but I assure you the clarity is super sharp and beautiful color. Its like using nothing on your phone. There are NO dot matrix crap that was on Xgear tempered glass.
Cheap bumper from amazon. It fits and doesnt add extra bulge to it.
Conclusion: Its a must get item if you arent into the plastic and/or polyurethane style. Installation was a breeze and it took me a bit longer because I am extremely anal about dust and the super tiny lint. I had to use the alcohol swab because I saw 3-4 lints so I had to lift it up and reapply the protector. All in all Im super happy with mine.
open that badboy and give us a review!! Hopefully it doesnt have those dot grid that the xgear has.
hypertek said:
open that badboy and give us a review!! Hopefully it doesnt have those dot grid that the xgear has.
Click to expand...
Click to collapse
+10000000000000000000000000000000 Do it asap, also dont forget to check if it curved slightly at the edge of the screen.
agreed!
Been holding out for something like this without the dot grid.
cant stand the plastic or rubber ones.
hypertek said:
open that badboy and give us a review!! Hopefully it doesnt have those dot grid that the xgear has.
Click to expand...
Click to collapse
It has already been confirmed by other users that it does not have the dot grid that the Spectre one has
JSale said:
+10000000000000000000000000000000 Do it asap, also dont forget to check if it curved slightly at the edge of the screen.
Click to expand...
Click to collapse
Its not. I got mine today as well n it doesn't cover the entire screen. It has spaces around the screen exposed to make it case friendly which it is since I've tested a few cases on them
Sent from my SCH-I535 using Tapatalk 2
Let's see some more pics. Does it have those dots, or grid pattern that others are talking about on the other branded protector? Does it come in both blue and white options? does it interfere with the proximity sensors? Thanks
Sushimoto said:
Let's see some more pics. Does it have those dots, or grid pattern that others are talking about on the other branded protector? Does it come in both blue and white options? does it interfere with the proximity sensors? Thanks
Click to expand...
Click to collapse
Why don't people read the posts or search for info?!?
It's already stated by aly19 that it doesn't have the dots, also by many others.
Only white version, as stated on SGP website...
Uploading pictures now.
Done. See above!
I got a free Modello case with mine
Sent from my SCH-I535 using Tapatalk 2
xXJay_RXx said:
I got a free Modello case with mine
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Awesome! Did you pay for expedited shipping? Mine was ordered while "in stock" but now it's saying it won't ship until 9/10. Weak.
---------- Post added at 02:00 PM ---------- Previous post was at 01:58 PM ----------
Sushimoto said:
Let's see some more pics. Does it have those dots, or grid pattern that others are talking about on the other branded protector? Does it come in both blue and white options? does it interfere with the proximity sensors? Thanks
Click to expand...
Click to collapse
http://www.amazon.com/gp/product/B00925X510/ref=oh_details_o00_s00_i00
Please refer to this ^ and this:
Technical Details
Excellent Clarity: Transparent Tempered Glass (NO DOTS)
Perfect cutout for sensors: NO interference of sensor responsiveness
Strong Surface Hardness (8H-9H)
Glossy and Oil-Resistance to easily wipe smudges and fingerprints
Compatible to use with a CASE (NO lifting with cases)
NICE! i like the SGP stuff... my Neo Hybrid is on the way :good:
xXJay_RXx said:
I got a free Modello case with mine
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Aww im jelly. But I got mine from Amazon and shipped from SGP itself so I didnt get any free case. Availability was 9/5 and it left the warehouse on 9/4. Just got it today so they exceed my expectation. I will recommend SGP to everyone now.
That does look very good, with a case it would be hard to tell there is one on there. Might look decent on a pebble blue s3 since they include the home button. with a case wrapping everything else.
Is the adhesive all over the screen, or just around the colored border like the xgear one?
I wonder how long will it be til they come out with other colors, this would look great to cover my corner crack. https://sphotos-b.xx.fbcdn.net/hphotos-ash4/296752_10151086342373557_657668591_n.jpg
thacounty said:
Awesome! Did you pay for expedited shipping? Mine was ordered while "in stock" but now it's saying it won't ship until 9/10. Weak.
---------- Post added at 02:00 PM ---------- Previous post was at 01:58 PM ----------
http://www.amazon.com/gp/product/B00925X510/ref=oh_details_o00_s00_i00
Please refer to this ^ and this:
Technical Details
Excellent Clarity: Transparent Tempered Glass (NO DOTS)
Perfect cutout for sensors: NO interference of sensor responsiveness
Strong Surface Hardness (8H-9H)
Glossy and Oil-Resistance to easily wipe smudges and fingerprints
Compatible to use with a CASE (NO lifting with cases)
Click to expand...
Click to collapse
Haha yea I paid to get mine faster. It was shipped on Tuesday n I got it today. I couldn't wait to get this n man its really worth the $35. Looks n feels just like glass. If it wasn't for the outlining (since it doesn't cover the entire screen) you wouldn't even know its there.
Sent from my SCH-I535 using Tapatalk 2
aznknightz17 said:
Aww im jelly. But I got mine from Amazon and shipped from SGP itself so I didnt get any free case. Availability was 9/5 and it left the warehouse on 9/4. Just got it today so they exceed my expectation. I will recommend SGP to everyone now.
Click to expand...
Click to collapse
Haha I did order from Amazon. The case has the SGP Amazon sticker asking to leave feedback. But yea same as you. Was shipped on the 4th n got it today. I ordered two. One for me n one for my sister. I told her how great these things were but she was skeptical. Now she's in love with the thing lol
Sent from my SCH-I535 using Tapatalk 2
jal3223 said:
Is the adhesive all over the screen, or just around the colored border like the xgear one?
Click to expand...
Click to collapse
Just around the colored part. The glass itself has no adhesive.
Updated pic with a cheap bumper from amazon. Wish I was a lucky winner like xXJay_RXx :crying:
Can you verify that those Spigen Neo Hybrid cases will fit with the glass protector? I have the GLAS.t screen protector at home because I haven't had time to put it on. But in an email I got from Spigen, they said their case and glass protector will work together. I want to order the case asap but I want to make sure.
Thanks in advance.
Sent from my SCH-I535 using xda premium
I ordered the new Yellow Glasszone Glass Screen Protector and an Aluminum home button sticker.
GlassZone came from Korea in around 8 Days not bad! From here: http://www.ebay.com/itm/HOT-Deal-LC...738&pid=100015&prg=1006&rk=1&sd=190732428935&
The home button cover came from Honk Kong in around 7 Business days! Not bad at all from here: http://www.ebay.com/itm/16087807105...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Pictures:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PROS:
The button adds much needed pop and allows for better home button response!
Home button is made of good materials.
Home button helps with the small gap the glass makes.
Glass is better than plastic
Glass has a nice fit
Glass is very sturdy feeling
Glass has great INDOOR viewing angles
Glass has nice touch response no lag
Glass is THIN!
Glass works with my Otterbox Defender Case!
CONS:
None with button love it
Glass came in yellow but did NOT mention it had Sparkly flakes in it (photos don't really show it because camera sucked).
Glass does have some horizontal pattern only visible in bright light from manufacturing.
Overall Impression:
I like the fit and finish of the glass and love the button. Shipping was fast. The cons are that the glass is sparkly but the advert was mostly KOREAN. So maybe my bad. Not sure if all colors are like that but YELLOW is. SUPER clean screen only time you see the sort of manufacturing cross hatch pattern is in SUPER BRIGHT almost blinding sun. I can live with it. Indoors it looks good but still hate the sparkles lol. I will live with it.
I will probably get the Glass.t screen next and compare.
Overall price and shipping was good. Quality is good on both minus some taste issues with colors.
Hope you enjoyed this review!:good:
is it possible for you to retake pictures of the phone without the case so I can see the edges? the picture is so out of focus that it's hard to tell how big/small the gap is from the edge.
mputtr said:
is it possible for you to retake pictures of the phone without the case so I can see the edges? the picture is so out of focus that it's hard to tell how big/small the gap is from the edge.
Click to expand...
Click to collapse
Camera is super crummy. Maybe later tonight I will borrow my GF's iFail and retry.
your camera just wasn't focused. Not sure how old your camera is, but there should be some sort of autofocus or halfpress to force a focus attempt.
Hopefully that helps.
EDIT: fixed a stupid homonym fail on my part.
mputtr said:
is it possible for you to retake pictures of the phone without the case so I can see the edges? the picture is so out of focus that it's hard to tell how big/small the gap is from the edge.
Click to expand...
Click to collapse
The gap is around .01-.05 mm theres another thread about the glasszone and the op has pics and my pics should be in that thread too
Sent from my SCH-I535 using xda app-developers app
Edit: found it
http://forum.xda-developers.com/showthread.php?t=1875717
The op in that threAd has black and I have pics of my yellow one. Ill post pics of my lime one if you need
looks sweet. Now i just have to try and decipher the korean to see what kind of red is in that auction.. and if it's some sort of pinkish red or actual scarlet/deep red.
Thanks for the review, the yellow does look good and stands out quite well, I think all the glasszone are glittered.
Hey just curious is proximity sensor area cutout or just not painted?
Sent from my GT-I9300 using Tapatalk 2
I ordered the same one in white about 2 weeks ago, how long did it take to come in?
I now have the SGP on and I think it's a little too thick for my Defender case, it doesn't really "snap" together like it did with the plastic, stock protector.
zen0s said:
Hey just curious is proximity sensor area cutout or just not painted?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
It is clear glass and not a cut out I really like it. It is starting to grow on me. :laugh:
KeithSr said:
I ordered the same one in white about 2 weeks ago, how long did it take to come in?
I now have the SGP on and I think it's a little too thick for my Defender case, it doesn't really "snap" together like it did with the plastic, stock protector.
Click to expand...
Click to collapse
Yea I removed the stock screen protector from my otterbox and the Glasszone fits perfect. It took me like 8 business days to arrive and the seller was really helpful had a tracking number and a personalized not that was really cool. Recommend the sellers of both products. :good:
Is the colour paint work on the underside of the glass, also can you update the photo''s with some close up to show the edge coverage on all four sides.
thanks
kms108 said:
Is the colour paint work on the underside of the glass, also can you update the photo''s with some close up to show the edge coverage on all four sides.
thanks
Click to expand...
Click to collapse
The paint is good quality and is under the glass. It looks and feels like it was the original screen! I love it. I forget it is on top of my current screen. I will update photos later tonight when I have a better camera.
SpyFi said:
It is clear glass and not a cut out I really like it. It is starting to grow on me. :laugh:
Click to expand...
Click to collapse
You don't have any proximity sensor issue? Xgear's spectre is like that and many people are having that issue.
Would you mind downloading "proximity sensor finder" on play store? And check if it's detecting with glasszone on? Also try in pitch black environment.
Thanks in advance
Sent from my GT-I9300 using Tapatalk 2
Do these just sit on top or is there adhesive?
Sent from my SGH-T999 using xda app-developers app
zen0s said:
You don't have any proximity sensor issue? Xgear's spectre is like that and many people are having that issue.
Would you mind downloading "proximity sensor finder" on play store? And check if it's detecting with glasszone on? Also try in pitch black environment.
Thanks in advance
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
No issues what so ever. Tested it with my hand by covering it during a call. I own a cell phone repair shop so I am VERY familiar with issues related to proximity sensors. I even went in the bright sun and it had no issue.
The screen has adhesive that is not too gummy and can be cleanly removed without having to pry too hard or leave residue. The adhesive covers all the colored areas to keep dust out and a snug fit.
Proximity sensor with no light black room.
NO HAND COVERING IT:
WITH HAND COVERING:
How does this compare with the SGP glas offering? They seem to get good reviews?
Thanks
I couldn't get used to not being able to pull down the notification bar, and having the back button work after hitting it 3 or 4 times with the SGP.
Sent from agent SGS III via Tapatalk
SpyFi said:
No issues what so ever. Tested it with my hand by covering it during a call. I own a cell phone repair shop so I am VERY familiar with issues related to proximity sensors. I even went in the bright sun and it had no issue.
The screen has adhesive that is not too gummy and can be cleanly removed without having to pry too hard or leave residue. The adhesive covers all the colored areas to keep dust out and a snug fit.
Proximity sensor with no light black room.
Click to expand...
Click to collapse
Cool thanks you so much for the reply.
I just noticed something, on my proximity sensor it says 8.0mm max distance, but on yours I see 5.0mm? Maybe not all S3 are calibrated the same? Could this be the reason why I had proximity sensor issue with xgear spectre? Very strange :/
Sent from my GT-I9300 using Tapatalk 2
SpyFi said:
I ordered the new Yellow Glasszone Glass Screen Protector and an Aluminum home button sticker.
GlassZone came from Korea in around 8 Days not bad! From here: http://www.ebay.com/itm/HOT-Deal-LC...738&pid=100015&prg=1006&rk=1&sd=190732428935&
The home button cover came from Honk Kong in around 7 Business days! Not bad at all from here: http://www.ebay.com/itm/16087807105...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Pictures:
PROS:
The button adds much needed pop and allows for better home button response!
Home button is made of good materials.
Home button helps with the small gap the glass makes.
Glass is better than plastic
Glass has a nice fit
Glass is very sturdy feeling
Glass has great INDOOR viewing angles
Glass has nice touch response no lag
Glass is THIN!
Glass works with my Otterbox Defender Case!
CONS:
None with button love it
Glass came in yellow but did NOT mention it had Sparkly flakes in it (photos don't really show it because camera sucked).
Glass does have some horizontal pattern only visible in bright light from manufacturing.
Overall Impression:
I like the fit and finish of the glass and love the button. Shipping was fast. The cons are that the glass is sparkly but the advert was mostly KOREAN. So maybe my bad. Not sure if all colors are like that but YELLOW is. SUPER clean screen only time you see the sort of manufacturing cross hatch pattern is in SUPER BRIGHT almost blinding sun. I can live with it. Indoors it looks good but still hate the sparkles lol. I will live with it.
I will probably get the Glass.t screen next and compare.
Overall price and shipping was good. Quality is good on both minus some taste issues with colors.
Hope you enjoyed this review!:good:
Click to expand...
Click to collapse
great review.
i'd love to buy this, the yellow looks great on the phone..but not sure about the sparkly flakes for a guy tho..lol
NOTICE: THE GLAS IS NOW DISCONTINUED!
Hey everyone, welcome to my very thorough and in-depth review on Spigen SGP's GLAS, tempered glass screen protector, for the Samsung Galaxy S3.
Purchase at: Cretouch.com
Installation
- Easy as hell. No air bubbles and fuss. *Just make sure to thoroughly clean the screen and read the instructions.* Tape works well for getting rid of dust.
Also go from edge towards the center not vice versa. The edges of the protector(colored bezel/frame) is thicker than the clear glass area, so going from center out can cause sensitivity issues.
Clarity
- No clarity loss at all whatsoever. Looks like the stock screen.
Fingerprints
- The oleophobic coating really does work. I have noticed less fingerprints with the GLAS.
Feel/Texture
- Honestly feels just like the original glass screen. Very smooth and glass like.
Cutouts
- Cutouts are done well. There are physical cutouts for the sensors, speakers, and home button. Sensors work just fine and the cutout for the home button is a bit recessed. Spigen includes epoxy buttons that add a slight raise for the home button. They're also great for some more personalization.
- Internal, clear cutouts for the LED light, front facing camera, and capacitive menu buttons.
Coverage
- Does not go edge to edge. Leaves a few mm of space between the GLAS and the bezel.
Sensitivity:
- So after having installed the protector and using it, I have negative things to say about the GLAS. The responsiveness of the screen is lost by quite a bit. Swipes often make accidental clicks and touch often does not register. According to Spigen, installing from edge to center should fix the problem many were having, but this was not the case.
Here's a pic with the Neo Hybrid:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Case comptability(from the cases I have):
Spigen Neo Hybrid - works, still some gap left between case and screen protector
Spigen Lumi/Color Series bumpers - same as neo hybrid
Draco S3 Bumper - works
Cruzerlite Clone Army - works
Spigen Modello - works
Acase Super Leggera Pro - works
Overall works with every case from what I can see that doesn't obtrude or come around the edge of the phone too much.
Comment if you have a case that is compatible with the GLAS.
Video Reviews:
Part 1 - Installation review(my thoughts as I install the protector and tips)
Part 2 - Conclusion
Part 2 - Review
Not available yet.
High res. pics
Pictures with the phone are on the way.
Awesome review :good:
I like the Packaging and the Home Button stickers that come with it
no more GLAS
This product has been discontinued, and there is thread about it http://forum.xda-developers.com/showthread.php?t=1875115
gjang:
It has been notified by Spigen SGP that Samsung Galaxy S3 GLAS Premium Tempered Glass Series have been discontinued. Due to the many complaints of the product, they have decided not to sell it anymore.
Sincerely,
CreTouch Customer Service
zen0s said:
This product has been discontinued, and there is thread about it http://forum.xda-developers.com/showthread.php?t=1875115
gjang:
It has been notified by Spigen SGP that Samsung Galaxy S3 GLAS Premium Tempered Glass Series have been discontinued. Due to the many complaints of the product, they have decided not to sell it anymore.
Sincerely,
CreTouch Customer Service
Click to expand...
Click to collapse
I was looking forward to getting it. Glas. T is still available?
Sent from my GT-I9300 using Tapatalk 2
I believe Spigen is still selling the GLAS. CreTouch is an authorized reseller. If you want to purchase it you can go to spigen.com
Works with Otterbox Defender if you knock the Defender's stock (crappy) screen protector out
Product has been discontinued. Hope they are making a replacement.
Damn.. Why exactly was it discontinued.. What were the complaints about?
Sent from my SGH-T999 using xda premium
Been reviewed a few times. Anyways, since the protector doesnt go edge to edge, dust/particles/hair get stuck on the side of the protector. I plan on removing mine tonight, way to much crap stuck to the sides.
Crisisx1 said:
Damn.. Why exactly was it discontinued.. What were the complaints about?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Also a lot of people seemed to have experienced sensitivity issues. missed keystrokes when typing, missed inputs when playing games etc.
Mine only arrived after this issue was reported, and I applied it by the same way the OP did, pressure from outside towards centre, (as per statement from sgp) but I still had the issues, it was really annoying, I had to purposely slow down my typing in order to prevent having so many errors.
Does anyone know if they're going to be releasing a new version of the GLAS screen protector?
To the op, thanks for the review and very detailed.
I have a alternative to the spg, looks identical, I have no issue with it and the quality is very good, mine is using japanese material, item made in korea and package in china.
the way i install it is just put pressure along the sides a few times, not even touching the center.
I'm wait for the release of the blue version.
You shouldnt buy ANY product from Spigen. Ive bought 3 products from them and got burned all 3 times. I did get a replacement for one of them though. First was the neo hybrid. The volume rocker didn't work. After numourous emails (in which they already knew this product had this problem) I got a replacement. I was happy. Next was this glass screen protector, the sensitivity was awful and the thing collected so much dust on the sides of the screen protector it was a joke. The sides of the protector were covered in lint and were black lol. Now I order their ultra thin air case and the stupid thing doesn't even stay on the case. Even their website reviews say the same thing. So all 3 accessories I've bought from SPIGEN were terrible. Good luck if you take the chance. I'm currently using my old otter box defender, looking for a new case though.
Sent from my SCH-I535 using xda premium
this looks amazing! how does it go after a couple weeks use? It is possible to have a drop test on the glass?
Cynofield said:
this looks amazing! how does it go after a couple weeks use? It is possible to have a drop test on the glass?
Click to expand...
Click to collapse
why don't you buy one and test it out, no one is going to do that on purpose.
Anywhere to get these still?
Sent from my SCH-I535 using Tapatalk 2
kms108 said:
To the op, thanks for the review and very detailed.
I have a alternative to the spg, looks identical, I have no issue with it and the quality is very good, mine is using japanese material, item made in korea and package in china.
the way i install it is just put pressure along the sides a few times, not even touching the center.
I'm wait for the release of the blue version.
Click to expand...
Click to collapse
Where did you find that? Link?
Hi all,
Starting this thread to see which tempered glass protector is best for the u11 plus.
The phone apparently, from what I’ve read, has a flat front display which should make it easier to find good protection.
I have mine preordered with HTC in the UK and am patiently awaiting delivery for me to be able to test some I bought from Amazon.
Please feel free to add any of your own experiences and opinions.
Thanks all!
Sent from my iPhone using Tapatalk Pro
Ive pre ordered the phone but already brought a screen protector from ebay, as its a flat front with no finger reader it looks pretty simple. Once I get the phone I will post some pics but only cost £3 so cant moan if it not perfect.
Mine came with a tempered glass. It seems official from HTC. Haven't placed it yet though so I wouldn't know about quality.
Sent from my Nexus 6P
The one i got off ebay was crap, it just fills the screen itself rather than all the little bezels.
Got one from Brotec, it's crap, too small and it's peeling at the top, bought another brand from amazon.
Bought the below linked one and it's pretty much perfect for me.
https://www.amazon.co.uk/gp/aw/d/B07799J3ZH?psc=1&ref=yo_pop_mb_pd
Full screen coverage and full adhesive too! I'm definitely impressed.
Sent from my HTC U11 plus using Tapatalk
ronak47 said:
Bought the below linked one and it's pretty much perfect for me.
https://www.amazon.co.uk/gp/aw/d/B07799J3ZH?psc=1&ref=yo_pop_mb_pd
Full screen coverage and full adhesive too! I'm definitely impressed.
Sent from my HTC U11 plus using Tapatalk
Click to expand...
Click to collapse
I bought this too, wouldn't stick, acted like it was flat and the screen was curved. It's in the bin now awaiting a replacement...
got this one and was a load of crap, fine for a day then started peeling on each edge
https://www.amazon.co.uk/gp/product/B0777MH2C4/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Got another one on order so will come back when i get it.
You might have been unlucky I guess or I was lucky lol.
Pics attached
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 1
Sent from my ONEPLUS A5010 using Tapatalk
Another 1 not to buy, fits really well, sticks well but the glass part as no sticky bits which means there is a tiny gap between glass and protector which makes a oily like bubble in the the middle of the screen
https://www.ebay.co.uk/itm/2-Pack-H...022543&hash=item5d78a1760e:g:li8AAOSwfVhaO9Zh
---------- Post added at 01:33 PM ---------- Previous post was at 01:33 PM ----------
Another 1 not to buy, fits really well, sticks well but the glass part as no sticky bits which means there is a tiny gap between glass and protector which makes a oily like bubble in the the middle of the screen
https://www.ebay.co.uk/itm/2-Pack-H...022543&hash=item5d78a1760e:g:li8AAOSwfVhaO9Zh
Phil750123 said:
got this one and was a load of crap, fine for a day then started peeling on each edge
https://www.amazon.co.uk/gp/product/B0777MH2C4/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Got another one on order so will come back when i get it.
Click to expand...
Click to collapse
I bought the same but I have the same problem, edges are white as if the screen is curved.
I asked the company to give me the other screen protector they have but it`s even worst: it doesn`t even cover the panel and it`s still white on the edges.
Link:
https://www.amazon.co.uk/gp/product/B077176ZP7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
What`s the other one you bought?
Karas1988 said:
I bought the same but I have the same problem, edges are white as if the screen is curved.
I asked the company to give me the other screen protector they have but it`s even worst: it doesn`t even cover the panel and it`s still white on the edges.
Link:
https://www.amazon.co.uk/gp/product/B077176ZP7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
What`s the other one you bought?
Click to expand...
Click to collapse
best one I have brought so far, considering ive brought 4 is https://www.ebay.co.uk/itm/2-Pack-HT...8AAOSwfVhaO9Zh
I'm not 100% happy with it but its staying on. I had to give it about 3/4 days for the middle to bed down properly but not it has its not too bad at all.
Phil750123 said:
best one I have brought so far, considering ive brought 4 is https://www.ebay.co.uk/itm/2-Pack-HT...8AAOSwfVhaO9Zh
I'm not 100% happy with it but its staying on. I had to give it about 3/4 days for the middle to bed down properly but not it has its not too bad at all.
Click to expand...
Click to collapse
Thanks for the reply but the link doesn`t work
Bought this one: https://www.amazon.es/Protector-Oly...8&qid=1515012199&sr=8-2&keywords=htc+u11+plus
It's much better than Brotec, but it's not perfect, can see the residue from the glue on the corners.
Thinking in buying this one from ultimateshield: https://www.ultimateshield.co.uk/co.../htc-u11-plus-tempered-glass-screen-protector
It sucks so much trying to find a decent screen protector that works with a case! I tried the beyeah one and it didn't work with my case, the edges lifted. Tried the more cut out version just to find out that it doesn't even cover the whole screen horizontally wtf? I'm just thinking about giving up
Meowzen said:
It sucks so much trying to find a decent screen protector that works with a case! I tried the beyeah one and it didn't work with my case, the edges lifted. Tried the more cut out version just to find out that it doesn't even cover the whole screen horizontally wtf? I'm just thinking about giving up
Click to expand...
Click to collapse
Yes same situation here. Tried both of Beyeah screen protector but they are really bad, one is too big and the other is too small.
I don`t know why is so difficult to cut the screen protector correctly, it should be easy
the best one I found is this one : https://www.ebay.co.uk/itm/2-Pack-H...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649
its pretty much full coverage with slight gaps for a case, its stayed stuck down for nearly a week now! The main downside is there's sometimes a gap in the middle as it doesn't have sticky stuff on the glass itself. this displays as a oily like tiny part but it hardly noticeable, only really see it in certain light conditions. The longer I've had it on the better its got so not really an issue for me.
Ugh, this is a pain to find a decent screen protector for the device. I'm considering Ultimate Shield Tempered Glass Screen Protector, however that ADDS big bezels onto the side bezels of the phone; as seen in videos of Ultimate Shield Screen Protectors. There is a good one by Olixar but that is for Pre-Order only, and waiting for it to come out but have been waiting for a while. Any suggestions anyone?
ronak47 said:
Bought the below linked one and it's pretty much perfect for me.
#had to remove the link as XDA wouldn't allow me to write it in the reply!#
Full screen coverage and full adhesive too! I'm definitely impressed.
Sent from my HTC U11 plus using Tapatalk
Click to expand...
Click to collapse
I bought this same one on the day you posted this and I've had no issues with it. Is a good fit and hasn't caused any issues with my case.
Originally bought that terrible beyeah one that didn't even fit the screen and that went back for an immediate refund.
Phil750123 said:
best one I have brought so far, considering ive brought 4 is https://www.ebay.co.uk/itm/2-Pack-HT...8AAOSwfVhaO9Zh
I'm not 100% happy with it but its staying on. I had to give it about 3/4 days for the middle to bed down properly but not it has its not too bad at all.
Click to expand...
Click to collapse
Just ordered this one, lets see how it functions.
As for the list "not to buy" https://www.belsimpel.nl/accessoire-detail/mobilize-safety-glass-screenprotector-htc-u11-plus
Its from a dutch company. The screen protector is WAAY to small for the screen.