hey. just now i unlocked my device and want toflashe rom cm10 in this forum,i didnt do root ,i flashed the kernal faux 0010b4 and flashe the rom and the gapps,i did all this ,iand not its in boot loop alot of time,i tried to restore to hwat i backed up- ,and still in boot loop... what i can do? pliz help.
Can you get into recovery? You can charge it there.
Sent from my HTC One X using xda app-developers app
you sure?
you sure in that? because i dont see red light when i am in recovery...
bardahan123 said:
hey. just now i unlocked my device and want toflashe rom cm10 in this forum,i didnt do root ,i flashed the kernal faux 0010b4 and flashe the rom and the gapps,i did all this ,iand not its in boot loop alot of time,i tried to restore to hwat i backed up- ,and still in boot loop... what i can do? pliz help.
Click to expand...
Click to collapse
Did you repack the kernel for the ROM.
Dude, I got to where you are a couple of weeks ago and I panicked. 10 minutes later I was sorted.
Download the rom and kernal again (prolly best to use a kernel already packed for the ROM you want to take a variable out of the equation). May I recommend Tripndroids CM10 ROM and the kernel that comes with it. This will be fast to flash before your battery dies and I am very familliar with flashing it so I'll be able to help more easily. You can always start again when you've charged. Alternatively, Use the boot.img from any ROM you like. Stick to a matching ROM and kernel for now as it saves the repack and a couple of steps in flashing.
Copy ROM zip to your SD (using ADB is easy: adb push yourfile.zip /sdcard/yourfile.zip)
Extract the boot.img from the rom zip (on your PC)
Go into fastboot and connect USB
fasboot flash boot boot.img
fastboot erase cache
Full wipe in recovery
erase cache and dalvik in recovery
Flash the ROM in recovery
Reboot - First boot will take a while.
very ty
hey, ty for the good explain ,now i tried another kernal and its worked,mabey the kernal just was fail,but now the phone is work ,very ty.
just 1 question,which rom is good and stable? and if good life battery that you can tell me? because i saw all the roms in this forum and i dont know which one is the best
ty for the help
bardahan123 said:
hey, ty for the good explain ,now i tried another kernal and its worked,mabey the kernal just was fail,but now the phone is work ,very ty.
just 1 question,which rom is good and stable? and if good life battery that you can tell me? because i saw all the roms in this forum and i dont know which one is the best
ty for the help
Click to expand...
Click to collapse
That's very subjective but I like TripNRaVeRs CM10 Endeavour Unleashed. It comes with a completely stable 2.x kernal and there is an almost totally stable 3.x kernel and an experimental (not at all stable) 3.x kernel. All cna be flashed without the re-pack.
BTW. If you ever get to panic stations again you can charge by going into fast boot and choosing power down. Then you can charge for a while before starting again.
BTW agian, there is a thanks button. You could click it if you wanted!
if you want to use other kernel (faux, ncx) than the one supplied in rom you should always repack it using online repacker http://nibble.cc/repack/
if not you will be 90 % stuck in bootloop
Related
Currently i have been sat here for about half an hour waiting for RunnyMede AIO V6.0.4.3 too boot, and im just sat looking at the boot animation
Ive Checked MD5 Sums on the file and they are correct
I have been running Sandvold ICS and Cyanogenmod 7 for the last year and felt moving back too sense and so far i cant boot into any sense rom for some reason
I am on Stock Hboot
1gb EXT4 Partition
I have done a full whipe and i also use 4EXT Recovery Touch
Any Idea's?
Probably a very basic Answer to this but i cant find it >.<
Just pull the battery then boot into recovery, do full wipe, dalivik ect.. and try again.
Sent from my HTC Desire
Ive done that so many times >.<
Lol happened to me before when i tryed runny rom, took like 8 goes just to download it then bout 4 times to try and install it, it just kept on freezing when booting up. Why not try runnymede aio 6.1.1 s/e. Its very good.
Sent from my HTC Desire
Hi, I had similar problem with installing slim ICS for Desire [based Sandvold]. After couple of tries I notice, that problem seem be in boot.img, recovery didn't flash boot.img. Manual flash boot.img from your ROM zip archive over fastboot may resolve your problem too.
Thanks, may give it a go but just flashed cm7.2 and fallen back in love with it so ill take the knowledge on board again
..
stefi.com said:
Hi, I had similar problem with installing slim ICS for Desire [based Sandvold]. After couple of tries I notice, that problem seem be in boot.img, recovery didn't flash boot.img. Manual flash boot.img from your ROM zip archive over fastboot may resolve your problem too.
Click to expand...
Click to collapse
i want to try and see if this works but i dont understand what you mean. im having the same problem
Ryno101 said:
i want to try and see if this works but i dont understand what you mean. im having the same problem
Click to expand...
Click to collapse
He is saying you unzip the rom that you are trying to flash, then go into Fastboot and then use the command: fastboot flash boot.img
Personally never done it as i just gave up and moved onto cyanogenmod kangs, and there amazing currently
Not 100% sure about the command but someone will correct me if im wrong
My friend is currently running Arconium ICS on his Xperia, and now when I tried to install CM9 (Did full wipe > install CM > install gapps in CWM) it just gets stuck at the boot logo (SONY). After recovering the backup of Arconium in CWM it boots up fine again.
Since the boot logo didn't change, I'm thinking CM9 maybe didn't install a new kernel or something? Is there something I can do to make sure that CM9 fits as well as possible? If kernel switching is on the table I'd like to be able to do this from CWM.
Thank you!
bajsmumsaren said:
My friend is currently running Arconium ICS on his Xperia, and now when I tried to install CM9 (Did full wipe > install CM > install gapps in CWM) it just gets stuck at the boot logo (SONY). After recovering the backup of Arconium in CWM it boots up fine again.
Since the boot logo didn't change, I'm thinking CM9 maybe didn't install a new kernel or something? Is there something I can do to make sure that CM9 fits as well as possible? If kernel switching is on the table I'd like to be able to do this from CWM.
Thank you!
Click to expand...
Click to collapse
you must install the kernel "boot.img" through flashtool
is inside the zip file
krattos said:
you must install the kernel "boot.img" through flashtool
is inside the zip file
Click to expand...
Click to collapse
Do I have to do this via flashtool? No way to do it from inside CWM? Please excuse if this is a stupid question, I'm not still a 100 % sure what boot.img, recovery, kernel and all these are and how they fit together.
bajsmumsaren said:
Do I have to do this via flashtool? No way to do it from inside CWM? Please excuse if this is a stupid question, I'm not still a 100 % sure what boot.img, recovery, kernel and all these are and how they fit together.
Click to expand...
Click to collapse
Yes, through the FlashTool is safer.
For all your doubts see this link, is a little extended but very complete.
http://forum.xda-developers.com/showthread.php?t=1133650
bajsmumsaren said:
Do I have to do this via flashtool? No way to do it from inside CWM? Please excuse if this is a stupid question, I'm not still a 100 % sure what boot.img, recovery, kernel and all these are and how they fit together.
Click to expand...
Click to collapse
Boot.img is the kernel in a compiled file, which needs to be installed via fastboot. Flashtool includes fastboot aswell, so you can install the kernel(boot.img) using it.
Recovery is a certain 'program' used to install custom stuff, make full backups(Nandroid backup) and restore them, wipe/format partitions and some other stuff. Recovery can be included already inside the kernel, but there is also possibility to install it on /system partition for those who can't unlock bootloader and/or install custom kernel.
My recommendation - Don't do it if you don't understand anything. You should go and learn about the whole Android first, get yourself familiar with how to recover the phone(install stock firmware etc), what are the terms that we use, what is what etc, then come back. Else...you might get yourself a nice (temporary) brick and then you have another problem, how to get back the phone.
bajsmumsaren said:
My friend is currently running Arconium ICS on his Xperia, and now when I tried to install CM9 (Did full wipe > install CM > install gapps in CWM) it just gets stuck at the boot logo (SONY). After recovering the backup of Arconium in CWM it boots up fine again.
Since the boot logo didn't change, I'm thinking CM9 maybe didn't install a new kernel or something? Is there something I can do to make sure that CM9 fits as well as possible? If kernel switching is on the table I'd like to be able to do this from CWM.
Thank you!
Click to expand...
Click to collapse
Obviously you didnt flash the kernel..and before doing that u need to make sure if ur bootloader is unlocked..if it is unlocked then only you can proceed with flashing the kernel and then installing the ROM.
Same Here!!
but Nothin seems to b workin for me!! Ive Done everything as per da instructions!
I flashed the boot.img file which i unzipped from the cm9 nozomi.zip file!!
I formatted the data, the cache and the dalvik cache and then installed the cm9 and gapps files as well and then when i reboot my device from the recovery menu it just gets stuck at the boot screen of free xperia!!
(
pleasehelp!!
Assistere said:
Same Here!!
but Nothin seems to b workin for me!! Ive Done everything as per da instructions!
I flashed the boot.img file which i unzipped from the cm9 nozomi.zip file!!
I formatted the data, the cache and the dalvik cache and then installed the cm9 and gapps files as well and then when i reboot my device from the recovery menu it just gets stuck at the boot screen of free xperia!!
(
pleasehelp!!
Click to expand...
Click to collapse
Dude, nozomi is only for Xperia S device. You installed the wrong ROM!
Go check the supported devices list to find your device's codename.
Someguyfromhell said:
Dude, nozomi is only for Xperia S device. You installed the wrong ROM!
Go check the supported devices list to find your device's codename.
Click to expand...
Click to collapse
Dude mine is Xperia s is only!!
sorry i frgt to mention bout my phone earlier!!!
Assistere said:
Dude mine is Xperia s is only!!
sorry i frgt to mention bout my phone earlier!!!
Click to expand...
Click to collapse
Then you are at wrong forum.
I'm looking to root my HTC One X but I'm a bit confused by Kernals and Roms
I'm aware that a Rom is essentially the Android distro that the Phone will run of such as Cyanogen Mod or Viper, however I don't really understand the use of a Kernal and what it's function is.
Also How would I go about flashing Kernals and Roms via Clockworkmod Recovery?
Thanks in advance for the help
(it's a lot more complicated than flashing with the Desire)
This may help
OKay lemme see how much i can explain though i am not very good at this.
Suppose ur phone is a car..then the rom is tthe body of the car but the kernel is the engine.
The kernel(AKA Boot.img) tells the phone what to do how to interact wid applications etc.
Now to the flashing part.When u have rooted the Phone and installed clockwork recovery u copy the ROM files to ur SD card(Extract the Boot.img of the ROM using Winzip).
Till the time ur using the stock boot.img of the ROM(Which i recommend for begineers) u just need to flsah the boot.img using fastboot and then install ROM using recovery but if u wanna use a custom Kernel then u have to flash the boot.img and the modules also.
Anything else Do let me know
Or you can go to this place
http://forum.xda-developers.com/showthread.php?t=1832891
And check things out, read a lot first so you know where to begin and understand what you have to do exactly ... and in what order
Help is always around the corner
I can't thank you two enough, the explanations are really clear and I actually understand it now!
hi... , after I upgraded my XAS from ICS to JB using Sony updater. I rooted and unlocked the bootloader and after it installed Cabratos Adv Stock kernel. however now I'm not sure the right way to install ROMS, why each one speaks to one different way (flashing boot.img or install using CWM ...) however I do not have the slightest idea what I'm doing ... someone help me
DvDwx. said:
hi... , after I upgraded my XAS from ICS to JB using Sony updater. I rooted and unlocked the bootloader and after it installed Cabratos Adv Stock kernel. however now I'm not sure the right way to install ROMS, why each one speaks to one different way (flashing boot.img or install using CWM ...) however I do not have the slightest idea what I'm doing ... someone help me
Click to expand...
Click to collapse
well for one you already flashed cobrato's kernel so you're ready to flash a stock based ROM like Trinity Vengeance...
if you want to flash an AOSP or CM based ROM like PACMAN or CM10.1 just download the ROM package, extract the boot.img that's inside the package, fastboot flash the boot.img, reboot to recovery [they already have their own recovery with the kernel], wipe data and cache and then flash the ROM package
if anyone knows the right way to install the Forzaferrileo Kernel v4 with Wifi Module (chmod 644) i thanks
DvDwx. said:
if anyone knows the right way to install the Forzaferrileo Kernel v4 with Wifi Module (chmod 644) i thanks
Click to expand...
Click to collapse
just fastboot flash boot the kernel..or you can also use flashtool, like i do :laugh:
I'm using the 2.9 ROM Trinity put this giving a monetary errors besides be draining the battery ... I would like to do something like we do on computers... make a master reset(Format) and give write new ROM... I have all CMW/TWDR BACKUPS before i start Modifing my XAS
... the wifi works fine flashing this way?
DvDwx. said:
... the wifi works fine flashing this way?
Click to expand...
Click to collapse
yes it should
4 years ago I modified my S.E. C905 ... I developed drivers (Audio / Display / Camera) however only 4 months I bought my XAS ... and I'm trying to recovery the lost time .. sorry for the english, brazilian here xD
what is the best installation configuration of Trinity 2.9 ROM (Acro S) with Kernel Forzaferrileo? better, what do you think best, the first rewrite. FTF .200 original and then install over the Trinity ROM?
DvDwx. said:
4 years ago I modified my S.E. C905 ... I developed drivers (Audio / Display / Camera) however only 4 months I bought my XAS ... and I'm trying to recovery the lost time .. sorry for the english, brazilian here xD
Click to expand...
Click to collapse
i think you mean you want to fully wipe everything in your phone and do a clean install?have you tried wiping data/factory reset and format partitions?
That's right, I want to make a Clean Install, even from scratch, see if some of the bugs disappear
DvDwx. said:
That's right, I want to make a Clean Install, even from scratch, see if some of the bugs disappear
Click to expand...
Click to collapse
bugs will always be there bro, what with all the modding and scripting that developers do on a ROM..you just have to find the right workarounds in my opinion
i really understand that... but this "bugs" about i'm saying is from based source(Installation conflicts)... i just will do a clean re-installing to be sure... maybe when sony release new Update some bugs disappear...
I'll do it tomorrow ... enough for today(1:10 AM here) ... Thanks for help me (I still have to re-format my PC today ... another thing is full of bugs)
...
If you can pass me the setup order to install the trinity ROM with Forzaferrileo kernel i will enjoy it
bye :highfive:
I have a doubt now ... to flash the. TFT file, making a clean re-installation, what i need wipe, format or do the factory restore? in what order?
and after that.. I'll have to do the root again? ... neither the unlock the bootloader? ...
DvDwx. said:
i really understand that... but this "bugs" about i'm saying is from based source(Installation conflicts)... i just will do a clean re-installing to be sure... maybe when sony release new Update some bugs disappear...
I'll do it tomorrow ... enough for today(1:10 AM here) ... Thanks for help me (I still have to re-format my PC today ... another thing is full of bugs)
...
If you can pass me the setup order to install the trinity ROM with Forzaferrileo kernel i will enjoy it
bye :highfive:
Click to expand...
Click to collapse
what i did when i flashed trinity was:
flash cobrato kernel
reboot to recovery
wipe data/factory reset and cache
flash trinity rom
reboot to system
if you wanna flash forzaferrarileo kernel after flashing the rom just fastboot flash it or use flashtool..i dunno if you can use forzaferrarileo kernel to flash the rom, but i beleive you can do so since it has cwm recovery already
Make sure you have the latest version of Flashtool.
Guys i really need help, I'm using an xperia play and i had just unlocked the bootloader and then flashed a the trueancestors ics rom and the LuPuS_zeus_Stock-gB+iCsv7-full kernel. Now it turns out that i didnt like the rom so i put it back to stock, still with the lupus kernel. Everything was working however i wanted to have the doomkernel v14. So i flashed the doomkernel and it was working however the wifi had erroros so i changed back to the lupus kernel. Again everything was working fine now. I then found out how to fix the wifi problem on doomkernelv14 so refrlashed that kernel. Before i reflashed the kernel i deleted the trueancestors isc rom as i didnt like it so i thought it would be ok. After the flash i tried to reboot the device, and it was stuck on the bootloader for doomkernel, not in a bootloop just stuck at doomkernel bootloader. I tried to fix this by going to recovery (clockwork mod) and then did a factory reset, wiped the cache and data and the dalvik cache as i saw these online for instructions on how to fix this problem. Still i had the same problem, stuck at bootloader. So i tried somthing different and reinstalled the trueancestors ics rom, and tried to reboot the xperia play, again stuck at bootloader. Im sorry if this was a bit long but I AM LITTRALLY BEGGING FOR SOME HELP! Please make a suggestion as to how i can fix this ASAP. Can it be fixed?Thank you for you Advice it is very much aprecciated. Ive posted this somewhere else in which i couldnt find but i really need help on this, please can anyone help. :crying:
you shouldn't post a like or not like any developer handmake. try back to a stock..
Mushtaqs said:
Guys i really need help, I'm using an xperia play and i had just unlocked the bootloader and then flashed a the trueancestors ics rom and the LuPuS_zeus_Stock-gB+iCsv7-full kernel. Now it turns out that i didnt like the rom so i put it back to stock, still with the lupus kernel. Everything was working however i wanted to have the doomkernel v14. So i flashed the doomkernel and it was working however the wifi had erroros so i changed back to the lupus kernel. Again everything was working fine now. I then found out how to fix the wifi problem on doomkernelv14 so refrlashed that kernel. Before i reflashed the kernel i deleted the trueancestors isc rom as i didnt like it so i thought it would be ok. After the flash i tried to reboot the device, and it was stuck on the bootloader for doomkernel, not in a bootloop just stuck at doomkernel bootloader. I tried to fix this by going to recovery (clockwork mod) and then did a factory reset, wiped the cache and data and the dalvik cache as i saw these online for instructions on how to fix this problem. Still i had the same problem, stuck at bootloader. So i tried somthing different and reinstalled the trueancestors ics rom, and tried to reboot the xperia play, again stuck at bootloader. Im sorry if this was a bit long but I AM LITTRALLY BEGGING FOR SOME HELP! Please make a suggestion as to how i can fix this ASAP. Can it be fixed?Thank you for you Advice it is very much aprecciated. Ive posted this somewhere else in which i couldnt find but i really need help on this, please can anyone help. :crying:
Click to expand...
Click to collapse
When switching kernels with different partition layout you have to delete data and system partition in fastboot mode.
I'm lazy to type again so here is a link where it is explained already:
http://forum.xda-developers.com/showthread.php?t=1849536&page=100
You can prevent future problems by wiping data and system partittion from CWM and THEN flash new kernel that have different partittion layout
Bakisha said:
When switching kernels with different partition layout you have to delete data and system partition in fastboot mode.
I'm lazy to type again so here is a link where it is explained already:
http://forum.xda-developers.com/showthread.php?t=1849536&page=100
You can prevent future problems by wiping data and system partittion from CWM and THEN flash new kernel that have different partittion layout
Click to expand...
Click to collapse
I havent tried this yet,becuase i need my dad to allow flash tool to work (Parental controls ffs -.-") however i saw the thread and i saw this part saying enter these commands "fastboot erase userdata and fastboot erase system i undestand how to get the command thing open but how do u enter these in, and what i mean is do you just open the command thing and just paste these in or do u have to right click somthing open comand promt here and all the stuff then enter them? Also these steps u listed, everything is fine its just my lack off knowladge for some of these things which i do apologize for
" Fully working steps, that is 100% working:
1.flash ftf with unlocked vendor partition (.62 or .79)
2.flash lupus gb kernel
3.erase system and data from fastboot
4.enter recovery and flash your rom "
Where do you get the unlocked vender partition, and which one is better .62 or .79 and if u could send me a link as your helping me i think ur choice of links for this is more reliable than mine, and again this is greatly appreciated.
" Fully working steps, that is 100% working:
1.flash ftf with unlocked vendor partition (.62 or .79)
2.flash lupus gb kernel
Download file name R800i_4.0.2.A.0.79.ftf from Xperia Play Index - ROM'S, FIRMWARE, KERNEL'S, GUIDE'S, THEMES, MOD'S second post have firmware files
Guide how to use flashtool you can find at [GUIDE][18th Dec][4Noobs] Flashing A FTF File Using Flashtool
Flashing .79 or .62 firmware is necessary if you are planning to use lupus gb or icd/gb kernel - and you only need to do it once.
Flashing kernel is same, but when pressed on lighting icon, choose "fastboot"
3.erase system and data from fastboot
Ok, i made a zip for you. Download it from attachment, unpack to anywhere you like and double-click file named "start". Power off phone, press search and while keeping it pressed, plug in usb. I don't think you need admin rights for that, but:
MAKE SURE YOU HAVE ROM PLACED ON YOUR SD CARD! Just in case, because that program will erase everything from your phone.
You should be able to enter recovery and/or flash your rom/restore your backup.
4.enter recovery and flash your rom "
Also, read some sticky threads, they are there for a reason
Again im really sorry to bother you with this, but what if i dont want to flash the rom, becuase i didnt like it in the first place so i went back to stock, however this method of returning to stock was to flash the R800i_4.0.2.A.0.62_(1253-4437).ftf file. Now what it did was return it to stock rom (AFTER i tried the rom i didnt like) and unrooted the phone, i dont know if it returns the phone to stock firmware, and if the method of the system data wipe thing with the command prompt deleted everything, what can i flash? Little more explaination as to why im asking. Before this boot stuck thing hapenned i had used that same ftf file to return it to stock and unrooted. I re-rooted the phone and then flashed the lupus kernel. Everything was fine. I wanted to flash the doomkernel because like a dum nut i wanted to show off that i could overclock to 2ghz ( if i wanted to) as if alrdy stated before and did so. I think you can only flash zip files from your SD card so the ftf file wont be able to be flashed while on the device. So what do i flash? Should i just flash the rom i dont like and try return it to stock, then flash the ftf .79 firmware again after re-rooting the phone, then flash the doomkernelv14. In short i want to stay with the normal gingerbread 2.3.4 with doomkernelv14. Again i havent tried this yet and also sorry for these long rambly posts, i just want to give you as much info as possible in order for you to help me. Thank you so much for your solution btw much appriciated.:good:
And almost forgot i also want it back to rooted but i can do that myself, i just thought i'd specifiy it just incase its worth anything.
Try this
http://forum.xda-developers.com/showthread.php?t=2408688
Sent from my R800i using xda app-developers app
Bakisha said:
Try this
http://forum.xda-developers.com/showthread.php?t=2408688
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Alright ive had the chance to try it out and i just got started on the firmware flash, problem is that its stuck at 16/033/2013 14:33:15
- INFO - Preparing files for flashing
16/033/2013 14:33:53 - INFO - Please connect your device into flashmode.
16/033/2013 14:33:54 - INFO - Opening device for R/W
16/033/2013 14:33:54 - INFO - Reading device information (stuck here)
Any sugessions to what i should do?
Alright i fixed the firmware flash problem and have made it all the way to the the part where you flash your custom rom and the phone should magicly work again. Ive got past the doomlord booting screen, thats good, now im stuck at a black screen, any ideas on whats going on?
K so i fixed all the above problems, by using a different kernel, and repeating all the previous steps, THE XPERIA PLAY IS BACK DUDE THANK YOU( hit the thanks button like 100 times).
Mushtaqs said:
K so i fixed all the above problems, by using a different kernel, and repeating all the previous steps, THE XPERIA PLAY IS BACK DUDE THANK YOU( hit the thanks button like 100 times).
Click to expand...
Click to collapse
Glad to helpfull
Remember, kernel must much rom. Gb stock kernel for gb sony based rom, you'll get stuck agan in kernel logo if if you flash kernel that don't match rom/firmware
Just read in kernel thread for info on wich roms it works
Sent from my R800i using xda app-developers app
Everythings fine at the moment and i dont want to make any more dumb mistakes so im just going to ask if wiping the data and system partitions in CWM still deleted everything. I just recently got all of my apps back and all that good stuff, i just want to know if they will get erased if i do this. My deepest appologies for bothering you with something so minor and selfish.
Sorry another selfish request (Damit) but when ever i flash the doomkernel v14 my wifi gets error, i was wondering if u knew how to fix this, if u dont and have the free time or feel like it, direct me to somone who does?
Mushtaqs said:
Everythings fine at the moment and i dont want to make any more dumb mistakes so im just going to ask if wiping the data and system partitions in CWM still deleted everything. I just recently got all of my apps back and all that good stuff, i just want to know if they will get erased if i do this. My deepest appologies for bothering you with something so minor and selfish.
Click to expand...
Click to collapse
Mushtaqs said:
Sorry another selfish request (Damit) but when ever i flash the doomkernel v14 my wifi gets error, i was wondering if u knew how to fix this, if u dont and have the free time or feel like it, direct me to somone who does?
Click to expand...
Click to collapse
Yes, if you wipe data and system then EVERYTHING is deleted. All your apps (data) and even android OS itself (system). You'll have to either flash new rom or restore backup after wiping system
Doomkernel need wifi modules to be installed from CWM recovery to have working wifi
I'll attach it
Im wondering about my battery life, because it seems to be draining faster. Im using no frills cpu with the lupus kernel alowing me to overclock to 1.6 ghz. I set my higest on 1613 mhz and lowest on 249mhz using the smartassv2 governer. any idea to whats going on ?
ok...i screw up my xperia play... dunno what to do.
hi guys, been a noob after i fed up with my xperia x8 now i having a xperia play f or 2 years and try to install a custom kernel and roms but i end up brick my phone. it just stuck at logo "xperia free play". it still can enter cwm recovery mode but when i use the method press the arrow thing then plug in the usb cable to pc , it seems my pc did detect my phone but cant show up my memory card in 'my computer' window. The i try to use fastboot & flashtool both can detect my phone after plug in. Here is what i do before brick:
first thing i did on my phone was to upgrade the stock kernel 4.0.2.a.0.42, then i unlock the bootloader, root it, and start download the custom rom without download the requirement kernel. after that, i install CWM using fast boot, put the custom rom to sd card, wipe user data, bla bla bla, then install the custom rom, the next thing i see is the problem i talking about earlier. So i try to using the service update from SCE but it just say im using a modified kernel hence i unable recover it using that method. so, i try to use flash tool x10 (i cant get any working download it keep saying error 404 link, this is the best i have now) when i press the flash it come out red words with error usb ...the thing is my phone cant get detected by my computer.... What to do or it is over? (p/s : i download the flash tool & adb package winrar file & the custom rom i mention is close 2 perfection)
I know is a bit long but I really need help on my phone, i still have a x8 here from my mom and mine is xperia play brick for 3 days now i still cant find a way to solve it. PLEASE HELLLLLLLLLLPPPPPPPPPPPP. THANK YOU FOR THOSE RESPONSE~!
Bakisha said:
Glad to helpfull
Remember, kernel must much rom. Gb stock kernel for gb sony based rom, you'll get stuck agan in kernel logo if if you flash kernel that don't match rom/firmware
Just read in kernel thread for info on wich roms it works
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Mushtaqs said:
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Click to expand...
Click to collapse
For most part, you are doing it right, but, to solve problem with recovery, you should use "eraser" AFTER you change kernel
Sent from my R800i using xda app-developers app
---------- Post added at 01:23 PM ---------- Previous post was at 01:18 PM ----------
Mushtaqs said:
Im wondering about my battery life, because it seems to be draining faster. Im using no frills cpu with the lupus kernel alowing me to overclock to 1.6 ghz. I set my higest on 1613 mhz and lowest on 249mhz using the smartassv2 governer. any idea to whats going on ?
Click to expand...
Click to collapse
Naturaly, it will drain more battery BECAUSE it's overclocked.
Sent from my R800i using xda app-developers app
Mushtaqs said:
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Click to expand...
Click to collapse
I think you should repeat the fastboot process once again, so:
fastboot erase userdata
and fastboot erase system
then just flash the kernel you prefer.
I had exactly the same problem with my play bootlooping after flashing some kernels. and this solved the problem for me :victory:
sorry for my bad English, :crying: