Need help quick! black screen after kernel flash =( - Sprint Samsung Galaxy S III

Okay, I tried to take the easy route to get my phone rooted and over clocked. I should also mention i'm on US T-mo
I was able to gain route via samsung toolkit. I searched around for an easy overclock method. I searched and found a youtube vid for Perseus and ended up using alpha 11 as linked in the video via Odin. Shortly after the task was completed, my phone attempted to restart. However, it was only a black screen although I did hear a vibrate. I quickly searched around and tried flashing Perseus's newer alpha20. Still same thing. I have no clue what I'm doing at this point and fear I have bricked my phone.
I can access download mode as well as custom recovery. But I don't know what to do at this point. Help please! I need my phone to work tomorrow for work! ack! I just got this phone 2 days ago. =(

I've tried wiping data/factory reset through custom recovery. Nothing. I've really screwed this one up. Is there something I can download and flash through Odin? Seems like I can only get in download mode and recovery mode which is pretty useless.

liberalswine said:
I've tried wiping data/factory reset through custom recovery. Nothing. I've really screwed this one up. Is there something I can download and flash through Odin? Seems like I can only get in download mode and recovery mode which is pretty useless.
Click to expand...
Click to collapse
#1 - This is the sprint forums
#2 - Just odin back to stock using the toolkit....make sure you use the t-mobile rom.

shiftr182 said:
#1 - This is the sprint forums
#2 - Just odin back to stock using the toolkit....make sure you use the t-mobile rom.
Click to expand...
Click to collapse
Oh man, I was such in a panic I didn't even notice.
Hmm, is there a step by step process for #2..samsung toolkit isn't working for me as I cannot pass the turn on "usb debugging mode" step given my phone cannot even load up at this point. It's either black screen with intermittent vibrations, custom recover, and download mode

liberalswine said:
Oh man, I was such in a panic I didn't even notice.
Hmm, is there a step by step process for #2..samsung toolkit isn't working for me as I cannot pass the turn on "usb debugging mode" step given my phone cannot even load up at this point. It's either black screen with intermittent vibrations, custom recover, and download mode
Click to expand...
Click to collapse
Check out this thread http://forum.xda-developers.com/showthread.php?t=1737855. you might try one of this first http://faux.androidro.ms/SGS3-ATT-TMO-kernel-tw-013m.zip

Related

Stuck on Samsung screen

I saw a couple people had the same issue that im now having but none of there solutions solved my problem
i wiped my GS3 for ATT tried to go back to a stock with root rom and when it rebooted it now just hangs at the samsung logo at boot tried re-flashing via odin with no luck also tried flashing a CWM.tar since i cant get into stock or CWM recovery to flash from there is there something im missing i know its late and maybe my brain isnt working like it should
Solved the problem myself.....and rather then just say i figured it out ill share how i did this since i watched countless videos and read endless amounts of threads and since none of them helped mem
First also try t put your phone into stock recovery mode and wipe your phone then flash this should take care of things if it doesnt try what i tried below
and i hope this can help someone else out there who has the same problem that i had all you have to do is the following i did this with obviously an AT&T model should work with others but as always try at your own risk.....
First make sure your battery has a charge even if its stuck on the boot screen its still charging....
then download KIES from samsung update it and make sure you have the latest version.
Next plug in your phone if your stuck at the samsung screen your computer will recognize your phone still at least it did with mine.
Once your done with the above open up KIES goto the top and then TOOLS and Firmware upgrade click on that enter your phone model (ATT SGH-I747) i dont get this part but next it will ask you for your SN and for some reason it doesnt recognize the SN use your IMEI
Now it should ask you a couple questions tell you its wiping your device and you will lose everything etc.....but then it will download the latest FW and begin to install everything and in about 20-25 mins everything will be back to stock
Nvm.. misread.
I'm stuck too...and Kies can't find the phone. Anyone have any other ideas? I can't even get into recovery...only download mode.
dbdynsty25 said:
I'm stuck too...and Kies can't find the phone. Anyone have any other ideas? I can't even get into recovery...only download mode.
Click to expand...
Click to collapse
your computer is not seeing your phone when you plug it in or its just KIES that doesnt see it??
also im guessing you have all the correct drivers installed??
yearziro said:
your computer is not seeing your phone when you plug it in or its just KIES that doesnt see it??
also im guessing you have all the correct drivers installed??
Click to expand...
Click to collapse
Yes, all drivers are installed because that's how I ODIN flashed it in the first place! Just stuck on the damn Samsung screen and I can't get Kies to connect to the phone. Not in Download Mode or when it's just stuck on that screen.
you can just hold VOL UP, HOME , POWER same time enter stock samsung recovery mode and scroll down select wipe data and cache and reboot u should good to go....
whit3gh0szt said:
you can just hold VOL UP, HOME , POWER same time enter stock samsung recovery mode and scroll down select wipe data and cache and reboot u should good to go....
Click to expand...
Click to collapse
Worked, thanks! I appreciate it.
it doesnt work on mine
dbdynsty25 said:
Worked, thanks! I appreciate it.
Click to expand...
Click to collapse
my cellphone reboots by itself on the samsun screen and i cant get on the recovery mode! any ideas!"
me neither
mkstf said:
my cellphone reboots by itself on the samsun screen and i cant get on the recovery mode! any ideas!"
Click to expand...
Click to collapse
Yeah I can't get into recovery either, and its getting really annoying.
indieslap said:
Yeah I can't get into recovery either, and its getting really annoying.
Click to expand...
Click to collapse
With the phone off, hold down VOL UP + HOME + POWER until the phone vibrates. Then let go of the power button. When you see the blue text in the top left corner of the samsung boot screen, let go of the other 2 buttons
xBeerdroiDx said:
With the phone off, hold down VOL UP + HOME + POWER until the phone vibrates. Then let go of the power button. When you see the blue text in the top left corner of the samsung boot screen, let go of the other 2 buttons
Click to expand...
Click to collapse
Okay, this brought the menu up for me, but I removed the data,cache, and reset the phone and it is still not working. Also, my phone just goes black after the Galaxy Samsung S3 logo, but the blue light in the top left is still on. Can anyone help me out?
P.S. Sorry for reviving this thread if it is too old.
Edit: I should also mention that I can still hear the sound of the phone booting up (the sound that typically occurs when the phone is on the white loading screen). However, the screen is black at this point.
cabato said:
Okay, this brought the menu up for me, but I removed the data,cache, and reset the phone and it is still not working. Also, my phone just goes black after the Galaxy Samsung S3 logo, but the blue light in the top left is still on. Can anyone help me out?
P.S. Sorry for reviving this thread if it is too old.
Edit: I should also mention that I can still hear the sound of the phone booting up (the sound that typically occurs when the phone is on the white loading screen). However, the screen is black at this point.
Click to expand...
Click to collapse
You're going to have to tell us what you did (changed, flashed, etc) before all this so that we can help you
xBeerdroiDx said:
You're going to have to tell us what you did (changed, flashed, etc) before all this so that we can help you
Click to expand...
Click to collapse
Ah, sorry about not providing enough information. Please keep in mind that I am very inexperienced and I may get some things incorrect just due to that. To my understanding, I went to try and root my phone, but beforehand I used the guides below to get my phone ready for the root (yes I do realize at this point that using these outdated guides was a clear mistake and I should have come to XDA instead). I flashed my phone to the stock kernel using the file that site provided, and then encountered the problem above. In my panic I have tried to restore the phone through several methods, but every time I try to load anything onto it with Odin, it doesn't complete until my phone restarts (and my phone won't boot up completely) so I can't get the pass message. Interestingly enough I did manage to get clockwork mod installed as that is what shows up when I try a secure boot using the methods that you described.
Ah, I am unfortunately not allowed to post links. The guides were off of Android Authority.
If there is any other information needed to help me please let me know and I will do my best to obtain it.
cabato said:
Ah, sorry about not providing enough information. Please keep in mind that I am very inexperienced and I may get some things incorrect just due to that. To my understanding, I went to try and root my phone, but beforehand I used the guides below to get my phone ready for the root (yes I do realize at this point that using these outdated guides was a clear mistake and I should have come to XDA instead). I flashed my phone to the stock kernel using the file that site provided, and then encountered the problem above. In my panic I have tried to restore the phone through several methods, but every time I try to load anything onto it with Odin, it doesn't complete until my phone restarts (and my phone won't boot up completely) so I can't get the pass message. Interestingly enough I did manage to get clockwork mod installed as that is what shows up when I try a secure boot using the methods that you described.
Ah, I am unfortunately not allowed to post links. The guides were off of Android Authority.
If there is any other information needed to help me please let me know and I will do my best to obtain it.
Click to expand...
Click to collapse
Sounds like you need to clear your cache partition and clear your dalvik cache. There are several guides on this site to help you. Choose the one that is most appropriate to what you are trying to do and follow it EXACTLY. There is one to start. Follow it from the beginning.
http://forum.xda-developers.com/showthread.php?t=2042775
When nothing else works start over from search. You cab use download mode? First make sure you got right drivers as that can mess up Odin. Use one in my Sig if you want. Then flag stock recovery with root someone nice will part a link to it I'm on my phone can't do it. Well fix your phone
Sent from my SGH-I747 using xda premium
allow rldcess
Okay now I am running into another problem. I have tried downloading the drivers from many different places and they always seem to be correctly downloaded. That being said, I can't install the drivers after I plug my phone into the computer (after downloading and installing Samsung USB drivers). Therefore, I cannot access my phone storage to put the root zip file on it. I was still able to download the custom recovery.
Now I have gone to a different computer, and the drivers seem to install correctly, but the phone still does not appear under my computer.
Edit: I do already have a root zip file on my phone from my earlier attempt, but I install it and my phone still doesn't load up. Also, Odin still recognizes the phone.
Edit 2: Windows says that the drivers cannot recognize the device. Edit 3: "Hardware ID Missing"
Bump
Sorry, I really need help for this. I can't install the MTP drivers even through using some of the tips on this site. That seems to be the problem with me accessing the phones storage from my computer. Does anyone have an ideas for what else I could do? Should I just take it to the store and hope they can fix it?
cabato said:
Okay now I am running into another problem. I have tried downloading the drivers from many different places and they always seem to be correctly downloaded. That being said, I can't install the drivers after I plug my phone into the computer (after downloading and installing Samsung USB drivers). Therefore, I cannot access my phone storage to put the root zip file on it. I was still able to download the custom recovery.
Now I have gone to a different computer, and the drivers seem to install correctly, but the phone still does not appear under my computer.
Edit: I do already have a root zip file on my phone from my earlier attempt, but I install it and my phone still doesn't load up. Also, Odin still recognizes the phone.
Edit 2: Windows says that the drivers cannot recognize the device. Edit 3: "Hardware ID Missing"
Click to expand...
Click to collapse
go to your device manager on your computer, locate samsung drivers for your device, uninstall them
restart your computer
then plug in the phone and lets it reinstall by itself
Use my drivers in my signature
They are last good damaging drivers. Don't update them but install them and plug phone in with no internet. after install plug internet in. There good stable drivers
Sent from my SAMSUNG-SGH-I747 using xda premium

[Q] boot loop after using mobile odin...please tell me not hard brick

Hey everyone, first time posting, but followed this forum for a while now.
Ok, so I had been running CM10 on my ICS S3 for a while, but wanted to start fresh and upgrade to JB, and see how I liked it. I followed this link:
androidrootz.c o m/2012/10/how-to-unroot-samsung-galaxy-s3-no.html
to flash my stock ROM back to the phone. (Hope linking is permitted, if not I apologize). I am on Mac and therefore used Mobile Odin Pro to help me achieve a fresh S3. I started at step 4, bc I didn't care to reset my flash counter. Everything was going smoothly until I hit step 15. It's here that the phone will flash the Samsung boot screen momentarily, then show the "blue droid" running script for less than a second, and repeat over and over again.
I've attempted to put it in recovery/download(is there a difference between the two) mode, but the phone repeatedly does what was just described. What options do I have to get this phone back in working order?
Please help me, King Newb, if there is actually any help that can be given. I really don't like using my old iPhone as my primary again. I just want my S3 back, preferably running JB and rooted. Please and thanks guys.
Out.
HungJury said:
Hey everyone, first time posting, but followed this forum for a while now.
Ok, so I had been running CM10 on my ICS S3 for a while, but wanted to start fresh and upgrade to JB, and see how I liked it. I followed this link:
androidrootz.c o m/2012/10/how-to-unroot-samsung-galaxy-s3-no.html
to flash my stock ROM back to the phone. (Hope linking is permitted, if not I apologize). I am on Mac and therefore used Mobile Odin Pro to help me achieve a fresh S3. I started at step 4, bc I didn't care to reset my flash counter. Everything was going smoothly until I hit step 15. It's here that the phone will flash the Samsung boot screen momentarily, then show the "blue droid" running script for less than a second, and repeat over and over again.
I've attempted to put it in recovery/download(is there a difference between the two) mode, but the phone repeatedly does what was just described. What options do I have to get this phone back in working order?
Please help me, King Newb, if there is actually any help that can be given. I really don't like using my old iPhone as my primary again. I just want my S3 back, preferably running JB and rooted. Please and thanks guys.
Out.
Click to expand...
Click to collapse
Actually, you can't post links cause you're a new user.
Here's what you should follow: http://forum.xda-developers.com/showthread.php?t=1822308
To get in download mode: Hold Vol down+Home + Power button
To get in recovery mode: Hold Vol up+Home + Power button
Instead of getting CWM, I would suggest getting TWRP, which can be done by downloading goomanager from the play store. (After you're done flashing stock rooted JB from the link above).
I am on Mac, is there an alternative to Odin, or a version that runs on OS X?
Thank you for putting me on the right track
HungJury said:
I am on Mac, is there an alternative to Odin, or a version that runs on OS X?
Thank you for putting me on the right track
Click to expand...
Click to collapse
Mobile Odin or Heimdall.
OK, I need a little more clarification. My phone doesn't boot, so are you saying that I can use Mobile Odin right on my Mac, and is it possible to link me to a proper copy of Heimdall? Also, is there perhaps a step by step instruction set for getting me back to a functioning phone? I clicked your link and found a ton of information, but still unsure which set of steps I need to follow.
Thanks again for your patience.
HungJury said:
OK, I need a little more clarification. My phone doesn't boot, so are you saying that I can use Mobile Odin right on my Mac, and is it possible to link me to a proper copy of Heimdall? Also, is there perhaps a step by step instruction set for getting me back to a functioning phone? I clicked your link and found a ton of information, but still unsure which set of steps I need to follow.
Thanks again for your patience.
Click to expand...
Click to collapse
Oh my bad, I replied fast (covering a lot of threads right now). Mobile Odin won't work.. And I haven't seen Heimdall around here. Sorry.
The easiest way would be to use a PC. I'll keep looking for what can be done on Macs (you should do the same )
I followed the steps to the link (used virtual machine) but when I get to the step where you press start, Odin just says "all threads completed. (succeeded 0/failed 0). So I think I'm getting close but not quite there yet.
Would it have something to do with the boot loader option? Just curious because of the boot loop I've been stuck in. Btw, I can't get my phone into recovery mode, however download mode still works fine, if that matters.
Another quick update. I've now been able to get into the phone by holding both volume buttons and the power button. Phone boots normally with cm boot logo. However the phone is completely wiped except for stock apps it comes with. This gives me a little more hope but still not sure where to go from here.
Bump. Can't anyone point me in the right direction? My situation is quite unique, as I have found another person explain it happening to them during my search. Want to get this fixed ASAP.
Thanks!
HungJury said:
Bump. Can't anyone point me in the right direction? My situation is quite unique, as I have found another person explain it happening to them during my search. Want to get this fixed ASAP.
Thanks!
Click to expand...
Click to collapse
Download this if you are us using AT&T and if not use the drop down menu on the top left and pick your device and download the latest jellybean update:
http://samsung-updates.com/device/?id=SGH-I747
Flash this download via mobile Odin. Read mobile Odin's directions carefully. You can so keep root of you wanted to through this app. This download will bring you back yo complete stock and will work for you.
HungJury said:
Hey everyone, first time posting, but followed this forum for a while now.
Ok, so I had been running CM10 on my ICS S3 for a while, but wanted to start fresh and upgrade to JB, and see how I liked it. I followed this link:
androidrootz.c o m/2012/10/how-to-unroot-samsung-galaxy-s3-no.html
to flash my stock ROM back to the phone. (Hope linking is permitted, if not I apologize). I am on Mac and therefore used Mobile Odin Pro to help me achieve a fresh S3. I started at step 4, bc I didn't care to reset my flash counter. Everything was going smoothly until I hit step 15. It's here that the phone will flash the Samsung boot screen momentarily, then show the "blue droid" running script for less than a second, and repeat over and over again.
I've attempted to put it in recovery/download(is there a difference between the two) mode, but the phone repeatedly does what was just described. What options do I have to get this phone back in working order?
Please help me, King Newb, if there is actually any help that can be given. I really don't like using my old iPhone as my primary again. I just want my S3 back, preferably running JB and rooted. Please and thanks guys.
Out.
Click to expand...
Click to collapse
I'm having the exact same problem. Is there a solution I need one so bad
I have the same problem as the OP.
I CAN NOT get it into recovery mode.
I CAN get it into download mode.
Is my only option to use ODIN on a windows PC? Does anyone have any clue of what software to download and from where?
Oli
Yeah, I would try that. I'm not to familiar with mobile Odin. I do know that after running certain roms, if you Odin to stock you need to do a factory reset from recovery after the Odin flash.
You're not going to be able to flash stock via odin if you can't get into download mode.
What OS did you come from? What did you do just before this all happened?
Try recovery mode again (vol up + home + power). Release only the power button when the phone vibrates and you see the blue script in the top left corner. Report back
He can get dl mode, not recovery
mrhaley30705 said:
He can get dl mode, not recovery
Click to expand...
Click to collapse
I stand corrected. I should wake up more before I hop on the boards. Cheers
Maybe you don't have cwm installed anymore since you wiped your phone. Try downloading rom manager and flashing cwm recovery then see if you can get into recovery mode.
Sent from my SAMSUNG-SGH-I747
Phone won't boot, can't use Rom manager to flash cwm. I stand by what I said. Flash to rooted stock, use goo manager (or Rom manager) to install custom recovery. Dl and flash Rom.
Mobile Odin works much like the desktop version. The Odin package usually has a recovery so CWM or TWRP will be replaced by stock recovery. Although mobile Odin does have the ability to exclude recovery from the flash. So you will have to get back into down load mode use the desktop version of Odin to stock then flash cfroot with Odin. Now you should be able to get into recovery as cfroot has CWM
Sent from my SAMSUNG-SGH-I747 using xda premium
enewman17 said:
Mobile Odin works much like the desktop version. The Odin package usually has a recovery so CWM or TWRP will be replaced by stock recovery. Although mobile Odin does have the ability to exclude recovery from the flash. So you will have to get back into down load mode use the desktop version of Odin to stock then flash cfroot with Odin. Now you should be able to get into recovery as cfroot has CWM
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
My way has one less Odin flash

Bricked s4

so i tried rooting my phone and it bricked...i had the "recovery in kies " error but now i got the screen blocked in boot ..than i tried to install costum roms using odin but aparently odint doesn't work....i had this same problem on my s2 and i solved it but now i cant solve this anymore...i have read about this on other threads but i couldnt fix it...i can only put my phone on download mode ...i dont know what to do anymore since odin doesnt work at all ( it keeps saying fail) ..i got the drivers installed ..please some1 help me i've spent 5 hours trying to solve this ..and now again i get the firmware upgrade encountred an issue .....but as i said cant solve it with samsung kies
smeen23 said:
so i tried rooting my phone and it bricked...i had the "recovery in kies " error but now i got the screen blocked in boot ..than i tried to install costum roms using odin but aparently odint doesn't work....i had this same problem on my s2 and i solved it but now i cant solve this anymore...i have read about this on other threads but i couldnt fix it...i can only put my phone on download mode ...i dont know what to do anymore since odin doesnt work at all ( it keeps saying fail) ..i got the drivers installed ..please some1 help me i've spent 5 hours trying to solve this ..and now again i get the firmware upgrade encountred an issue .....but as i said cant solve it with samsung kies
Click to expand...
Click to collapse
If you can put your phone in download mode you're not bricked.
Use Odin to get back to stock
http://forum.xda-developers.com/showthread.php?t=2258628
Once that is done use CF Root to root with Odin
http://forum.xda-developers.com/showthread.php?t=2294005
baseballfanz said:
If you can put your phone in download mode you're not bricked.
Use Odin to get back to stock
http://forum.xda-developers.com/showthread.php?t=2258628
Once that is done use CF Root to root with Odin
http://forum.xda-developers.com/showthread.php?t=2294005
Click to expand...
Click to collapse
i still get fail from odin....thats actually the thing i dont get....can it be from drivers?
Are you using the cable that came with the phone? I had the same problem and its because I was using another cable. If Odin isn't working. Kies should work as well. P.m. me if you need more help.
Sent from my SGH-M919 using XDA Premium 4 mobile app
eddies92 said:
Are you using the cable that came with the phone? I had the same problem and its because I was using another cable. If Odin isn't working. Kies should work as well. P.m. me if you need more help.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yes i am using the cable....and my problem keeps switching from firmware issue to stuck at boot....i tried with kies but it doesnt recognize my phone when i try emergency firmware recovery and when i try firmware upgrade and initialisation it says that it need 6gb free and i dont have enough space....i installed kies in another partition where i have 43gb free and still that error
smeen23 said:
yes i am using the cable....and my problem keeps switching from firmware issue to stuck at boot....i tried with kies but it doesnt recognize my phone when i try emergency firmware recovery and when i try firmware upgrade and initialisation it says that it need 6gb free and i dont have enough space....i installed kies in another partition where i have 43gb free and still that error and btw when i connect my phone to kies it says connecting... and i et to troubleshot the error and when i do it replace the driver over and over...thats why i assumed it from drivers..i already inatlled the drivers from different places but still nothing
Click to expand...
Click to collapse
smeen23 said:
yes i am using the cable....and my problem keeps switching from firmware issue to stuck at boot....i tried with kies but it doesnt recognize my phone when i try emergency firmware recovery and when i try firmware upgrade and initialisation it says that it need 6gb free and i dont have enough space....i installed kies in another partition where i have 43gb free and still that error
Click to expand...
Click to collapse
If you are stuck in a bootloop after running the recovery file in odin (it's 1.6 GB unzipped), which is the way things sound, pull the battery and go into stock recovery. Do this by replacing the battery, holding volume up, home, and power button until the ble recovery shows in the upper left then let go. In stock recovery, scroll down 9using volume button) to wipe data/factory reset. Coose that option with the power button. You will lose ALL data on your phone and you will have to go thru setup again. When it's done choose reboot in the menu and let it reboot. Don't freak if it takes a while. In a minute or 2 you will see the screen dim and it will boot. Go thru setup, root again, install custom recovery, and if you were wise enough to have done a backup tp your SD card, you can get it back.
Good luck, there are tutorials on Youtube if you care to search for them. Here's a good one -
http://youtu.be/yEJSv9MrVAg
@getsum
Good suggestion :good:
I think the issue is that he's making things more complicated than he needs to.
A step by step by the op would be helpful if your suggestion doesn't resolve the issue
---------- Post added at 01:51 AM ---------- Previous post was at 01:39 AM ----------
Op, you're a little confusing.
Are you able to successfully use ODIN and flash stock firmware, but get stuck in a boot loop or freeze on Samsung splash?
Or ODIN fails?
From you're posts it sounds like both issues are occurring, but I think it's a posting conflict, and your issue is one or the other, unless I'm wrong, which I've been before
when i try recovery it goes to boot saying loading recovery than it goes full off and after boot screen again...i tried twrp and still nothing but the good thing is that odin passed that ..the only thing it didnt fail....maybe i didnt have the right rom ...i am downloading the official i9505 rom and i hope it will work this time....but plz if any1 can help i would apriciate it
Odin problem
I am also having a odin problem. I have tried jdownloader2 as well. Everything is giving me an error on extraction. My phone is stuck on the pulsing T-Mobile 4G LTE. Please help...my wife is looking at me like I just wasted money on a useless brick :silly:
Make sure you guys ODIN the correct Stock Firmware for your model device.
Make sure you ODIN the correct Custom Recovery for your model device.
And if you're Rooting, for example with CF-AUTO-ROOT by Chain fire, make sure you ODIN the proper version for your device.
In addition, check your USB cable to ensure it's working properly 100% of the time and have enough battery juice to perform the above procedures.
Odin problem
I have double check all the stock firmware. Got the files from 247extreme.com, given to me by DarkMenace. Several downloads of the same files...nothing seems to pass the MD5 check. The USB cable is 100%.
Biker1 said:
Make sure you guys ODIN the correct Stock Firmware for your model device.
Make sure you ODIN the correct Custom Recovery for your model device.
And if you're Rooting, for example with CF-AUTO-ROOT by Chain fire, make sure you ODIN the proper version for your device.
In addition, check your USB cable to ensure it's working properly 100% of the time and have enough battery juice to perform the above procedures.
Click to expand...
Click to collapse
jtcovington said:
I have double check all the stock firmware. Got the files from 247extreme.com, given to me by DarkMenace. Several downloads of the same files...nothing seems to pass the MD5 check. The USB cable is 100%.
Click to expand...
Click to collapse
I used the file from here to Odin back to stock when soft bricked.
http://forum.xda-developers.com/showthread.php?t=2258628
☞Sent from here☜
baseballfanz said:
I used the file from here to Odin back to stock when soft bricked.
http://forum.xda-developers.com/showthread.php?t=2258628
☞Sent from here☜
Click to expand...
Click to collapse
I have tried all of those. Everyone is an MD5 error. I feel like I may be missing something. My recovery screen has a android on his back with a red triangle. I can get to the Tmobile screen, should it stay there longer than 5 minutes?
jtcovington said:
I have tried all of those. Everyone is an MD5 error. I feel like I may be missing something. My recovery screen has a android on his back with a red triangle. I can get to the Tmobile screen, should it stay there longer than 5 minutes?
Click to expand...
Click to collapse
Go into Stock Recovery
Wipe data and Factory Reset option
Boot
And everything will be good
I had the same happen to me regarding the Android on his back with a Red X.
I had to research to find what this mmeant and what to do.
After ODIN, I would freezeion Samsung splash twice.
Pull battery
Install battery
Press Power and Vol up buttons till you see the upper left hand blue script, andtrelease buttons to get into Recovery.
I went into Stock Recovery and chose the option where it says Factory Reset.
I then Booted Successfully.
Afterwards, I ODIN'd Custom Recovery, TWRP 2.5.0.2
Biker1 said:
Go into Stock Recovery
Wipe data and Factory Reset option
Boot
And everything will be good
I had the same happen to me regarding the Android on his back with a Red X.
I had to research to find what this mmeant and what to do.
After ODIN, I would freezeion Samsung splash twice.
I went into Stock Recovery and chose the option where it says Factory Reset.
I then Booted Successfully.
Afterwards, I ODIN'd Custom Recovery, TWRP 2.5.0.2
Click to expand...
Click to collapse
How long should it sit in the Tmobile 4G LTE screen?
jtcovington said:
How long should it sit in the Tmobile 4G LTE screen?
Click to expand...
Click to collapse
Could be several minutes, and a little longer.
Just wait it out after you choose Factory Reset/wipe option and Boot.
Biker1 said:
Could be several minutes, and a little longer.
Just wait it out after you choose Factory Reset/wipe option and Boot.
Click to expand...
Click to collapse
I am now stuck on the samsung logo with the blue writing on the top. What the hell have I done? PLEASE HELP! I probably need instructions like I am 2 years old...at least that is how this process is making me feel. I did read that as long as I can get to download mode it is okay. But I can't seem to get a good file for odin to work with.
jtcovington said:
I am now stuck on the samsung logo with the blue writing on the top. What the hell have I done? PLEASE HELP! I probably need instructions like I am 2 years old...at least that is how this process is making me feel. I did read that as long as I can get to download mode it is okay. But I can't seem to get a good file for odin to work with.
Click to expand...
Click to collapse
Pull battery
Install battery
Press Power and Vol up buttons together
When you see tiny blue script in upper left, immediately release buttons
See if you boot into Recovery.
If you can't boot into recovery and stuck with the tiny blue letters
Then......
Start again.
ODIN Stock Firmware
Make sure only the Auto Reboot and F reset boxes are checked
Click the PDA box and load the tar file
It will take a couple of minutes for the md5 checksum match
Then the file will auto load into the PDA box
Press Start
Will take about 8 minutes to complete
Your will see the upper left ODIN box turn Blue and Pass
Let the device boot
Wait several minutes
If stuck on Samsung Splash
Pull battery
Install battery
Don't power on device
Press Power and Vol up buttons
Enter Recovery
Scroll to Factory Reset/ option with Vol toggle
Press Power once Factory reset is highlighted
Let device Boot
Could take 10 minutes or so
Have Patience
If above successful
ODIN your Custom Recovery
Also Root if needed, but do the ODIN first tossee if it gets done.
Good luck
Biker1 said:
Pull battery
Install battery
Press Power and Vol up buttons together
When you see tiny blue script in upper left, immediately release buttons
See if you boot into Recovery.
If you can't boot into recovery and stuck with the tiny blue letters
Then......
Start again.
ODIN Stock Firmware
Make sure only the Auto Reboot and F reset boxes are checked
Click the PDA box and load the tar file
It will take a couple of minutes for the md5 checksum match
Then the file will auto load into the PDA box
Press Start
Will take about 8 minutes to complete
Your will see the upper left ODIN box turn Blue and Pass
Let the device boot
Wait several minutes
If stuck on Samsung Splash
Pull battery
Install battery
Don't power on device
Press Power and Vol up buttons
Enter Recovery
Scroll to Factory Reset/ option with Vol toggle
Press Power once Factory reset is highlighted
Let device Boot
Could take 10 minutes or so
Have Patience
If above successful
ODIN your Custom Recovery
Also Root if needed, but do the ODIN first tossee if it gets done.
Good luck
Click to expand...
Click to collapse
Okay, I was stuck on the recovery at first followed instructions.
ODIN to PASS...yeah!
Reboots...stuck on Tmobile 4G LTE
Pulled battery...got to recovery
Wipe/factory reset
says complete....reboot now
Stuck on Tmobile 4G LTE screen.
I am following instructions to the letter! I can only think that the file I using for ODIN is wrong.
Wife is getting very suspicious...uh oh!

[Q] Galaxy Note 2 i317 Won’t Boot After Update

Issue
1. Phone won’t boot beyond the Samsung Logo.
2. It won’t boot into recovery (download mode works).
3. Can flash rom using Odin but phone still won't boot.
Type of Phone
Type: AT&T Samsung Galaxy Note 2
Model: i317
Ownership: Bought in Nov 2012 brand new. Warranty is up but it is insured through AT&T.
History: Rooted and then un-rooted and returned to stock in January 2014.
Actions leading up to Issue
Updated to Samsung’s newest firmware Android 4.3 but didn’t like it. I rooted my phone and tried a custom rom but wasn’t happy. Un-rooted by flashing original stock rom via Odin 3.07. Worked great and I was back in business. But then the phone went through an update and never booted back up.
Detail
I’ve rooted all my other phones but never felt the need to root this one until I updated to Samsung’s new Android 4.3. I wasn’t happy with the decreased battery life and poor performance. So I used the method at http://forum.xda-developers.com/showthread.php?t=2004650 to root my phone using “root66_ATT_I317UCALJ2.tar.md5” with Odin 3.07 and it worked. I then tried a custom Cyanogen Mod rom but it still left something to be desired.
After more research I flashed the original stock rom “KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5” via Odin 3.07 and my phone worked beautifully, at least for a day. Then I started getting the AT&T update window for Android 4.3 and the only way to get rid of it was to pull my battery. It was happening so much that I couldn’t even make a phone call. Out of pure frustration I decided to accept the update.
After the update installed it rebooted and never made it past the Samsung logo. So I figured I would just go into recovery and perform a factory reset as well as wipe the cache. The problem here is that it won’t boot into recovery. Only download mode works. I’m also seeing a red LED which I’ve read is a sign of SDS.
I’ve tried re-flashing the original stock rom again. Every time I do I get the green “Pass” display but my phone still won’t boot. The binary count is now at 21 since I’ve tried flashing so many times. I’ve been working on this and researching for 3 weeks. I’ve never had an issue that I couldn’t resolve when it comes to any of my past phones but this is beyond my skill or understanding. I also tried Samsung keys but it says my device is not supported.
Short of digging a hole in my back yard and burying it, is there anything I can do to fix this?
(Note) My wife has the same phone and also didn’t like the update so I flashed the same original stock rom to her phone via Odin and it has been working just fine. Only difference is I never rooted hers. I should have gone that route with mine.
Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Zen Arcade said:
Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks I'll give it a try. I had thought about it but was afraid to mess things up even more. Is there one that you would recommend?
josh3josh3 said:
Thanks I'll give it a try. I had thought about it but was afraid to mess things up even more. Is there one that you would recommend?
Click to expand...
Click to collapse
Here's the link to TWRP (you want the Odin link toward the bottom):
http://teamw.in/project/twrp2/124
Here's the direct link to the latest philz cwm (you want the md5 file):
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt
I prefer philz, but you will likely need TWRP to follow the dicksteele guide. You should also track down a CWM flashable recovery package for MH3 recovery to flash back should you need to return the phone for repairs. You can get this by following the i317 link in my sig.
If flashing this in Odin doesn't work that would tend to support the emmc fail scenario. (i.e. you flash it, Odin behaves as if it flashed ok, you power off, attempt to boot recovery with home-VolUp-power and it still doesn't boot). If it does boot recovery, you can try the guide as I mentioned before. Good luck!
Zen Arcade said:
Have you tried flashing, via Odin, just a custom recovery?
If that works, you may be able to follow this guide, starting at post #2.
http://forum.xda-developers.com/showthread.php?t=2618447
If that doesn't work, it is possible you have an emmc issue.... Your symptoms are similar to what others have reported here recently. You might be able to get a repair covered if you can get them to look past the custom counter ... You are running stock firmware... Maybe kies tripped the counter... Stranger things have happened...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried each of those just now and they both flashed fine however there is no change. I guess before I break out the shovel I'll try to see if AT&T will fix it since I do pay for the insurance. Thanks for the help that was good stuff. I wish it could have worked.
josh3josh3 said:
I tried each of those just now and they both flashed fine however there is no change. I guess before I break out the shovel I'll try to see if AT&T will fix it since I do pay for the insurance. Thanks for the help that was good stuff. I wish it could have worked.
Click to expand...
Click to collapse
if you have nothing else to lose, can you try flashing the boot loader on this link
http://d-h.st/Krs from this thread
http://forum.xda-developers.com/showthread.php?t=2589891
then try one of the official odin package or this:http://d-h.st/DGZ
So, there appear to be many people who see this update as a bad joke. Like me.
I had a thread a couple days ago about how to kill the notification from att
Without root. Nothing can be done as far as ive heard/seen. Im a bit confused
About needing a battery pull to remove pp note, I have been just reboot and it
Goes away until next data use/net access. When my 8 hrs is up I turn data on
(Data off as 8hrs expires) and immediately get note and then I hit home- get
another 8 hrs. Im sorry to hear they wore you down with the note- im going to
fight and resist for the duration. And keep stock. Its a game now!
R, john
qkster said:
if you have nothing else to lose, can you try flashing the boot loader on this link
http://d-h.st/Krs from this thread
http://forum.xda-developers.com/showthread.php?t=2589891
then try one of the official odin package or this:http://d-h.st/DGZ
Click to expand...
Click to collapse
Tried it and it failed to flash. Now I have the yellow triangle. At least its something different. Still no good though. Reflashed stock rom and I'm back to the Samsung logo. Was worth a shot. Thanks.
Try param and tz package mentioned in post #3 here.... Might be something
http://forum.xda-developers.com/showthread.php?t=2596256
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
josh3josh3 said:
Tried it and it failed to flash. Now I have the yellow triangle. At least its something different. Still no good though. Reflashed stock rom and I'm back to the Samsung logo. Was worth a shot. Thanks.
Click to expand...
Click to collapse
You flashed LJ2 Stock ROM from ODIN?
And you are back to the Samsung Logo that flashing/pulsing blue???
If so .....
Pull the battery and let the phone sit for a few seconds, pop the battery in and boot into stock recovery (HOLD VOL UP+HOME+POWER) and do a FACTORY RESET then reboot.
I had to do the same thing an hour ago....
dicksteele said:
You flashed LJ2 Stock ROM from ODIN?
And you are back to the Samsung Logo that flashing/pulsing blue???
If so .....
Pull the battery and let the phone sit for a few seconds, pop the battery in and boot into stock recovery (HOLD VOL UP+HOME+POWER) and do a FACTORY RESET then reboot.
I had to do the same thing an hour ago....
Click to expand...
Click to collapse
Have tried that many times with no luck. Wish it were that simple.
josh3josh3 said:
Have tried that many times with no luck. Wish it were that simple.
Click to expand...
Click to collapse
Have you tried this yet ?
http://forum.xda-developers.com/showpost.php?p=49826416&postcount=9
Zen Arcade said:
Try param and tz package mentioned in post #3 here.... Might be something
http://forum.xda-developers.com/showthread.php?t=2596256
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I can't believed it worked. Flashed this and suddenly I have recovery. Then I re-flashed the original stock rom, did a reset and wiped the cache and I'm back up and running. Brilliant I say. Genius! Thank you for the great post and thanks everyone for your help. Seems like there should be a like button or something so that you get credit but I don't see one. This was my first time ever posting on any forum so I'm a little ignorant.
josh3josh3 said:
I can't believed it worked. Flashed this and suddenly I have recovery. Then I re-flashed the original stock rom, did a reset and wiped the cache and I'm back up and running. Brilliant I say. Genius! Thank you for the great post and thanks everyone for your help. Seems like there should be a like button or something so that you get credit but I don't see one. This was my first time ever posting on any forum so I'm a little ignorant.
Click to expand...
Click to collapse
That would be the Thanks button by the Quote...
OUTSTANDING !!!
Glad you're back among the living.
This will get you back to 4.1.2
http://forum.xda-developers.com/showpost.php?p=49616718&postcount=2
EDIT:
I just did this and it worked perfectly .....
I'm actually doing that step right now also. I flashed back to stock testing the ATT update server.
EDIT #2:
At this step when the phone reboots the script will run. When it completes you want to boot to system. The next prompt will be do you want to install ROOT. If you do the swipe it will install ROOT, there is a DO NOT INSTALL button on the middle of the screen. Just a heads up, don't know if you are turning your phone back in or not now.
- Second step is:
You will need to download TWRP 2.6.3.1 and flash it in ODIN.
http://goo.im/devs/OpenRecovery/t0lt...lteatt.img.tar
This is necessary for an openrecovery script to run that is stored in the /cache directory from the update.
- Put your Note 2 in Download Mode.
- Open ODIN, put openrecovery-twrp-2.6.3.1-t0lteatt.img.tar in PDA slot. Click Start and let the phone reset.
- Your phone will reboot in TWRP. If not, pull battery and enter recovery mode boot into TWRP recovery (HOLD VOL UP+HOME+POWER). The script will run by itself.
sgh-i317 EFS seems like its gone
could anybody help me out with my note 2. ive tried just about everything i can think of. im getting pretty desperate. i can get everything to work fine (recovery,download mode,) but something is keeping it from booting up to the main screen, it will just hand at the boot animation, or the att logo. in twrp it tells me failed to mount efs. ive looked around in the file folders and its like it got wiped out? im not sure how though. could that be why its not booting up?
any ideas??

Question about tmobile G95TUVU3DOI1

Hi, I'm kinda new to rooting android phone.I just got a galaxy s6 edge from tmobile and I would lIke to root the phone. Searching around the forum but still doesn't ubderstand how's it work. So I got a galaxy s6 edge, baseband version G95TUVU3DOI1, come with 5.1.1 SMG 925T. Question is if I'm root the phone will i able to restore back to stock firmware, will tmobile able to find out if I rooted or not? Because I'm in Jump! Program and plan to switch new phone next year. And its there any easy step by step guide to root the phone. I don't really care about Samsung pay, would like to have fingerprint sensor if possible. Thank you
Before you do anything, understand that you WILL TRIP KNOX AND BREAK SAMSUNG PAY. Also, it is your choice to modify your device and this process seems to work differently for differnt people, so if anything happens, it's on you. However, there are several threads here that can help you if anything goes wrong
Okay, make a backup of all your stuff on SmartSwitch
You're going to want to download ODIN 3.10.7 from here: http://forum.xda-developers.com/showthread.php?t=2711451
Then you're going to want to download UniKernel v8 from here: http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
Open ODIN on your computer and don't touch anything yet
Then you're going to put your phone into download mode by turning it off, then holding POWER+VOL DOWN+HOME until a blue screen appears.
Press VOL UP to enter download mode and connect your phone to your computer with the cable that came with your phone
Wait for the little box at the top left to turn blue
On ODIN, click the AP button and locate the UniKernel v8 file that you downloaded before
Once you've found it, double click it to fill in the AP field with the file
Click START and do not touch anything until it's done.
Your phone will restart and once it comes back up, you'll be rooted. It can take several minutes for it to fully boot, so give it time.
Now, this is optional, but if you want a custom recovery to flash custom ROMS, download TWRP onto your computer from here: http://forum.xda-developers.com/tmo...recovery-twrp2-8-6-0-g925t-5-1-1-of6-t3143002
Flash that file through ODIN using the same process as you used to flash UniKernel.
This recovery will let flash custom ROMs. I recommend XstreStoLite as it is very good on battery life, but you will not be able to use WiFi calling or VOLTE. You can download it here: http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
Let me know how it goes.
Can I unroot in the future if I want to go back to stock?
Osui818 said:
Can I unroot in the future if I want to go back to stock?
Click to expand...
Click to collapse
Yes. You'll just have to download the latest firmware from here or Sammobile.com and flash it using ODIN
Thank you. One last question, any chance using Odin will brick the device?
Osui818 said:
Thank you. One last question, any chance using OdinYes there will brick the device?
Click to expand...
Click to collapse
Yes. There is a small chance, but the method I described is the exact same method I used on my device and I've had no issues. Even if you do, there is almost a 0% chance of a hard brick unless you touch something you're not supposed to touch, and if you do soft brick, there are a few threads here that should be able to help. More than likely flashing stock firmware will fix any problems you have.
thanks akw for the run through, I've been away from android for 4 months and ran back to it. just got this phone and wanna quickly root it.
eruscool said:
thanks akw for the run through, I've been away from android for 4 months and ran back to it. just got this phone and wanna quickly root it.
Click to expand...
Click to collapse
No problem, buddy. Hope it goes well for you.
Akw6190 said:
No problem, buddy. Hope it goes well for you.
Click to expand...
Click to collapse
i need help too. i am trying to use smart switch as my last resort but its not working(ish). after installing the factory firmware it says the device will restart, unplug and plug it again. on the phone it reset itself and then with the green android logo saying installing system then 1/3 of the loading bar it just says erasing then blacked out then back on bootloop. i can still boot to recovery mode and download mode.
godefroy28 said:
i need help too. i am trying to use smart switch as my last resort but its not working(ish). after installing the factory firmware it says the device will restart, unplug and plug it again. on the phone it reset itself and then with the green android logo saying installing system then 1/3 of the loading bar it just says erasing then blacked out then back on bootloop. i can still boot to recovery mode and download mode.
Click to expand...
Click to collapse
Where are you getting the firmware from? What version of ODIN are you using? What port are you using in ODIN to flash the firmware?
There is a Mega download of the DOI1 firmware somewhere around here. I recommend downloading that and flashing using the AP port in ODIN 3.10.7, using the cable that came with your phone. This is the exact method I used to return to stock with no issues.

Categories

Resources