Hi there,
I noticed noone seems to have ever bothered building cifs.ko (the Kernel module necessary to access Windows Shares) for
the Galaxy Note 10.1
So I build one. Actually it's two modules md4.ko and cifs.ko (md4.ko has to be loaded first).
I have successfully tested the module on my EU N8000 running XXALGA with CIFSmanager. Streaming a 720p mkv with
MXPlayer just works really nice.
Here you go:
http://www.mediafire.com/?5lteys7tj45zuw7
DISCLAIMER: I am providing these kernel modules as-is. Altough they have been tested by me I take no responsibility whatsoever
if you break or damage your device while installing and/or using the modules. I am also not going to explain the steps necessary to actually
use the module. You should already know how to do it...or at least be smart enough to find out what to do
Enjoy!
maui
Sounds like a very helpful piece of code.
I really think that i could need this, but for me as a non developer... how to use this kernel modules?
Could you build a kernel including this modules for flashing via CWM so anybody can use it?
Best regards,
Gery
Sent from my GT-N8000 using xda app-developers app
It does not work for me: no such device.
I have moved the files to /mnt/sdcard/cifs. I entered " /mnt/sdcard/cifs/md4.ko;insmod /mnt/sdcard/cifs/cifs.ko" in cifs manager
I'm Running GT-N8000 DR.AKRIM_ROM N8000DDALI1_v0.31 4.1.1 12-9-2012
Is jellybean a problem?
They work on 4.0.4 (Hong Kong version - n8000zsali1)!!! Thank you.
I have an non-rooted italian N8000 running the latest stock firmware, and can access all my windows shares using the samba client built in in EsExplorer, no problem for me. What exactly is this module meant to do?
Inviato dal mio GT-N8000 con Tapatalk 2
HowHigh said:
It does not work for me: no such device.
I have moved the files to /mnt/sdcard/cifs. I entered " /mnt/sdcard/cifs/md4.ko;insmod /mnt/sdcard/cifs/cifs.ko" in cifs manager
I'm Running GT-N8000 DR.AKRIM_ROM N8000DDALI1_v0.31 4.1.1 12-9-2012
Is jellybean a problem?
Click to expand...
Click to collapse
Does not work for me as well. I'm running JellyNote beta 1 rom. Could someone please recommend custom rom which is supporting cifs or where would work this modul.
Thanks!
What's the use of this module? I don't understand... I haven't installed the module but can access flawlessly all my windows shares using the samba client of es file exlorer. I can also play any shared media file through such client, using any player installed in my note!
GT-N8000 using Tapatalk
Pls compile for 4.1.1.
Hi,
I compiled the cifs modules for the JB-Kernel. I couldn't test them out as I had no time to update, yet. But I need the cifs-modules so I started with them.
So, if anyone wants to try it out, please go ahead.
This is the first time I've build a kernel for android, just that you know :silly:
Greetings,
Maz
supermaz said:
Hi,
I compiled the cifs modules for the JB-Kernel. I couldn't test them out as I had no time to update, yet. But I need the cifs-modules so I started with them.
So, if anyone wants to try it out, please go ahead.
This is the first time I've build a kernel for android, just that you know :silly:
Greetings,
Maz
Click to expand...
Click to collapse
Compile nls_utf8.ko pls)
Can you say how to compile modules because at start I get error that file not found smc.h
Sent from my GT-N8000 using XDA Premium HD app
It seems like nls_utf8 is already build in the kernel.
If someone tests the cifs modules, it would be great to post here if they work or not.
supermaz said:
It seems like nls_utf8 is already build in the kernel.
If someone tests the cifs modules, it would be great to post here if they work or not.
Click to expand...
Click to collapse
Module works but I need nls_utf8 -no in kernel!!!
Sent from my GT-N8000 using XDA Premium HD app
I've attached the nls_utf8 kernel module. Please check if this helps.
Or do you need the NLS_KOI8_R for Russia?
supermaz said:
I've attached the nls_utf8 kernel module. Please check if this helps.
Or do you need the NLS_KOI8_R for Russia?
Click to expand...
Click to collapse
All works) Thanks)
Can you say how to compile this??
GooG2e said:
All works) Thanks)
Can you say how to compile this??
Click to expand...
Click to collapse
Then hit the Thanks button
To compile you need the android ndk prebuilt environment. I followed the this howto: http://source.android.com/source/building-kernels.html (from Downloading a prebuilt gcc downwards).
Then you need your kernel sources (look at the android dev section here). In the package is a README_Kernel where you can get the make command to build the default config. From there on you just run make menuconfig and make to compile things.
Best regards,
Maz
Please compile for 4.1.2
Sent from my GT-N8000 using XDA Premium HD app
hey man, can you please compile xpad.ko and ff-memless.ko for 4.1.1 ? You would bring a new wave of gamer to the galaxy note 10.1.
thx in regard
GooG2e said:
Please compile for 4.1.2
Sent from my GT-N8000 using XDA Premium HD app
Click to expand...
Click to collapse
+1 i have: init_module '/sdcard/cifs/md4.ko' failed (Exec format error)
Or am i doing smthg wrong?
Hi,
the cifs.ko and md4.ko given lately does not work on 4.1.2 rom.
Is there a compiled module for 4.1.2 ?
come on...
it shouldn't be hard to compile it for someone who has the setup.
If I had the storage capacity on my disk for installing a linux VM, I would do it but I really don't have a setup.
Related
I did that for myself but it could be useful, so why not share it!
This is the standard Froyo JPM kernel build from sources
It contains the su binary which calls Superuser.apk
Download this app from the market, and you're all set ^^
If you want a Froyo phone rooted cleanly and still secure, that's it.
Kernel to flash as PDA using Odin with 803.pit
Kernel sources:
http://github.com/project-voodoo/samsung_kernel_sources_gt-i9000/tree/froyo
Superuser app:
http://forum.xda-developers.com/showthread.php?t=682828
If you need more info, just ask
PS: I'm not sure every apps are happy with the need to call su from /sbin, which is in the ramdisk.
At least you can do everything you want from adb, and once you're root there is no limit
thank you very much.
You're always so kind!!!
Great! Gonna try JPM tomorrow.
Sent from my GT-I9000 using XDA App
How is this different from Chainfire's method? What is the advantage of using this over that? Thanks
Sent from my GT-I9000 using XDA App
ed10000 said:
How is this different from Chainfire's method? What is the advantage of using this over that? Thanks
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
The difference is that Chainfire uses the Samsung compiled kernel, while this one is compiled from GPL sources. Should be no differences, but for some reason this kernel is a lot bigger than the Samsung one. Anybody know why? Compiler options?
RyanZA said:
The difference is that Chainfire uses the Samsung compiled kernel, while this one is compiled from GPL sources. Should be no differences, but for some reason this kernel is a lot bigger than the Samsung one. Anybody know why? Compiler options?
Click to expand...
Click to collapse
Interesting I also would like to know what's the difference before I try to flash it on my SGS.
By the way, thanks to supercurio, RyanZA and all the developers
main diff for me is this is just a rooted kernel. it doesn't come with other goodies like superuser, and more imptly the e2 recovery which means i cna't do apply update.zip from the recovery mode using this kernel.
but i look forward to supercurio on the voodoo fix
supercurio said:
PS: I'm not sure every apps are happy with the need to call su from /sbin, which is in the ramdisk.
At least you can do everything you want from adb, and once you're root there is no limit
Click to expand...
Click to collapse
So with this, su is in sbin instead of system/xbin. Can we not move it/copy it to xbin if necessary? Is this a big deal?
Tyxerakias said:
So with this, su is in sbin instead of system/xbin. Can we not move it/copy it to xbin if necessary? Is this a big deal?
Click to expand...
Click to collapse
Yes you can. In fact, CF-Root does exactly that... it also contains all files in /sbin and /res, but at first boot install them to /system.
Chainfire said:
Yes you can. In fact, CF-Root does exactly that... it also contains all files in /sbin and /res, but at first boot install them to /system.
Click to expand...
Click to collapse
Yes that's it
This kernel does no special action ^^ it's just JM2 compiled from sources (presumably the same as Samsung's compiled) with an added file in /sbin
It's a bigger because for some reason the modules are quite big once compiled, they're probably not fully stripped and... because I included the ext4 kernel modules
hey ...
did u use z4build to implement ext4 support?
or can i run it and then use update.zip (z4mod) for ext4?
quick reply would be great ... just flashed to http://forum.xda-developers.com/showthread.php?t=796987
ty and big up fi di work u done!!!
EDIT: z4mod still not available should have read more posts before posting lol ... sorry
is ur ramdisk compatible with froyo JPM?
dt9394 said:
is ur ramdisk compatible with froyo JPM?
Click to expand...
Click to collapse
Sorry i don't understand your question
Hi sir,
I download the ramdisk voodoo provide from http://project-voodoo.org/downloads/Voodoo-beta4-GT-I9000-ramdisk.tar.bz2 and compile it with official JPM source code. So far no problem during compilation. But I know the ramdisk /lib/module/ file is slightly different from what i extract from official zImage.
So my question is, is your ramdisk compatible with froyo source code from samsung?
thanks,
dt9394 said:
Hi sir,
I download the ramdisk voodoo provide from http://project-voodoo.org/downloads/Voodoo-beta4-GT-I9000-ramdisk.tar.bz2 and compile it with official JPM source code. So far no problem during compilation. But I know the ramdisk /lib/module/ file is slightly different from what i extract from official zImage.
So my question is, is your ramdisk compatible with froyo source code from samsung?
thanks,
Click to expand...
Click to collapse
Hello !
For Froyo stuff, now everything is on github http://github.com/project-voodoo .
I transformed Voodoo in a complete source-based distribution and you have all the tools included here to do so
Thanks you supercurio!!!!!!!!!!!! voodooo!!!!!!!!!!!!! git clone it now
dt9394 said:
Thanks you supercurio!!!!!!!!!!!! voodooo!!!!!!!!!!!!! git clone it now
Click to expand...
Click to collapse
I made a new thread after your request (and some on IRC too!)
http://forum.xda-developers.com/showthread.php?t=813955
#compiled new cifs.ko, md4.ko, nls_utf8.ko for the new
IMM76I build
kernel number
3.0.8-gda6252b
attachment "cifs_gda6252b.zip"
------------------------------------------------------------------
hi there, i have compiled modules for CIFS to work on the stock 4.0.4 kernel.
kernel number must match "3.0.8-g034fec9"
in the attached zip,
here are the list of files.
cifs.ko
md4.ko
#above 2 are required to have it work
#here are native language support.
nls_utf8.ko
nls_cp932.ko
nls_cp936.ko
nls_cp950.ko
#above cp9xx are support for chinese characters.
nls_euc-jp.ko
#above is support for japanese letters.
thank you.
additional notes.
apparently you do not need any other native language support apart from utf8
the trick is, during the mounting process, you will need to specify the "iocharset=utf8" under options.
eg
"mount //192.168.15.123/a /home/b/c -t cifs -o username=d,password=e,uid=f,gid=g,iocharset=utf8"
for cifs manager, just put "iocharset=utf8" under the Options, and you should be able to see all different charsets.
do remember you will need to load the nls_utf8.ko
once you have the module install,
you can use cifs manager to manage your mounts.
(you can also set cifs manager to load this module for you).
Thanks, I'll give it a try later today.
soloxp said:
Thanks, I'll give it a try later today.
Click to expand...
Click to collapse
make sure that you have the correct stock kernel.
must match "3.0.8-g034fec9" else insmod will fail.
if anyone of you are running other version of kernel, i can try compile if for you as well, but let me know your kernel version.
do note, i have not tried compiling for other version, it might and might not work.
qwerp_ said:
must match "3.0.8-g034fec9" else insmod will fail.
if anyone of you are running other version of kernel, i can try compile if for you as well, but let me know your kernel version.
Click to expand...
Click to collapse
I've got the ICS 4.0.4 OTA update (IMM76D) to my Nexus S and it says "kernel 3.0.8-g6656123".
Any chance of getting a build for this one?
http :// dl.dropbox.com/u/11754796/imm74d.png
chrkad said:
I've got the ICS 4.0.4 OTA update (IMM76D) to my Nexus S and it says "kernel 3.0.8-g6656123".
Any chance of getting a build for this one?
http :// dl.dropbox.com/u/11754796/imm74d.png
Click to expand...
Click to collapse
here you go.
give it a try.
for stock Nexus S kernel "3.0.8-g6656123"
files included are
cifs.ko
md4.ko
nls_utf8.ko
Samba (CIFS) kernel modules for ICS 4.0.4 (IMM76D) kernel 3.0.8-g6656123.
qwerp_ said:
give it a try.
for stock Nexus S kernel "3.0.8-g6656123"
Click to expand...
Click to collapse
Thanks!
I confirm these work great on ICS 4.0.4 with "kernel 3.0.8-g6656123"
Awesome!
On my galaxy Nexus stock doestn work cifs manager said cannot access a needed shared library
Noob question, what is CIFS?
Enviado do meu Galaxy Nexus usando o Tapatalk
Guto ViP said:
Noob question, what is CIFS?
Click to expand...
Click to collapse
Common Internet File System, is another name for SMB (Server Message Block) also known as Samba. It's most commonly used in Microsoft Windows networks for providing shared network access to files, printers and other services.
These modules allows you to mount a shared directory from your windows computer, on your phone.
I use it to watch movies and play Mp3 on my phone, which is stored on my (windows) media server.
aplatas said:
On my galaxy Nexus stock doestn work cifs manager said cannot access a needed shared library
Click to expand...
Click to collapse
this is the shared library cifs manager is complaining about.
hence you need to download and insmod it.
note. you will need to be rooted to do this.
qwerp_ said:
this is the shared library cifs manager is complaining about.
hence you need to download and insmod it.
note. you will need to be rooted to do this.
Click to expand...
Click to collapse
I am root, now the module is loaded but When i mount cifs manager said the error No such file or directory this is extrange because On my old Nexus S works
aplatas said:
I am root, now the module is loaded but When i mount cifs manager said the error No such file or directory this is extrange because On my old Nexus S works
Click to expand...
Click to collapse
did you load both
cifs.ko and md4.ko
?
both is required to have it work.
qwerp_ said:
did you load both
cifs.ko and md4.ko
?
both is required to have it work.
Click to expand...
Click to collapse
Thanks, the problem it was that the md4.ko it wasn't loaded
qwerp_ said:
did you load both
cifs.ko and md4.ko
?
both is required to have it work.
Click to expand...
Click to collapse
thanks, works well.
Any idea how to get CIFS running on Galaxy Nexus 4.1.1?
funkdified said:
Any idea how to get CIFS running on Galaxy Nexus 4.1.1?
Click to expand...
Click to collapse
In case you didn't see [OP] created a new thread for 4.1.1 here
qwerp_ said:
make sure that you have the correct stock kernel.
must match "3.0.8-g034fec9" else insmod will fail.
if anyone of you are running other version of kernel, i can try compile if for you as well, but let me know your kernel version.
do note, i have not tried compiling for other version, it might and might not work.
Click to expand...
Click to collapse
Hello,
could you compile it for the kernel version 2.6.34.
( I have a Zenithink ZT 280 C91 with ICS 4.0.3)
regards
-janez
cifs help
Hi,
hoping you can help me out. i have an android tv box that id love to get cifs running on so i can use mount manager and download direct to my nas disk. could you possibly compile these modules for the following kernel???
$ cat /proc/versionLinux version 3.0.8 ([email protected]) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50)
) #8 PREEMPT Wed Sep 12 11:07:28 CST 2012
[email protected]:/ $
Thanks in advance for your help!!!
(require root to work).
i have created cifs module for the new 4.1.1 kernel
3.0.31-g6fb96c9
use this in conjunction with cifs manager
the md5sum of file is
b9efd28e550bef8c89fe9bada3640561
both
md4.ko and cifs.ko must be loaded to work.
as for the native language support (nls_utf8.ko), its down to yourself.
to use it,
under cifsmanager (when creating a new share)
set options "iocharset=utf8"
Working great here, thanks!
any chance of compiling a version for kernel 3.0.31-ge8de0e2. thanks in advance.
Gonzalo1987 said:
Someone knows how compile it for 3.0.31-gd5a18e0 ??
Click to expand...
Click to collapse
I found them here http://zxvf.homeip.net/
Problem of empty folder =(...
Waiting for a solution xD!!
Thanks you in advance!
qwerp_ said:
(require root to work).
i have created cifs module for the new 4.1.1 kernel
3.0.31-g6fb96c9
use this in conjunction with
the md5sum of file is
b9efd28e550bef8c89fe9bada3640561
both
md4.ko and cifs.ko must be loaded to work.
as for the native language support (nls_utf8.ko), its down to yourself.
to use it,
under cifsmanager (when creating a new share)
set options "iocharset=utf8"
Click to expand...
Click to collapse
Any idea how to get CIFS running on Galaxy Nexus 4.2.2 with utf8?
Thanks.
My kernel and probably many others have cifs built in.
Sent from my Galaxy Nexus using Tapatalk 2
update, it's been a while and while I'm back, I noticed cifs and md4 are not available for the rom I'm currently running... so updated modules are below
Definitely not a developer. But I like to tinker and mod. Since I updated to JB I haven't been able to find cifs.ko or md4.ko
So I decided to compile them myself.
Hope this helps somebody. I'll try to keep these up to date as new kernel's become available.
cifs.ko & md4.ko when loaded allow cifs (aka samba, windows) network shares to be mounted and viewable as local media
Root is required
I recommend coping the files to /system/lib/modules
Modules can be loaded from cmd line
insmod /system/lib/modules/cifs.ko
insmod /system/lib/modules/md4.ko
These can also be used by cifs manager which is available in the app store
just tell the app where you have stored the files on your device
cifs.ko & md4.ko : Compiled for TF300 with JB Kernel 10_4_2_9
http://www.mediafire.com/?j71gn5ar7har90t
cifs.ko & md4.ko : Compiled for TF300 with JB Kernel 10_6_1_15_3
http://www.mediafire.com/?fp7kk3i82q998ey
cifs.ko & md4.ko : Compiled for TF300 with JB Kernel 10_6_1_27_1
Please note this set is untest, I'm not running this kernel yet
http://www.mediafire.com/?en4kun1rmmb1zsw
KAD
Im your guinee pig
Some people might not know how to install this, if you wanna update the OP.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
keynith said:
Im your guinee pig
Some people might not know how to install this, if you wanna update the OP.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Click to expand...
Click to collapse
Thanks, first post updated with a few instructions
Was just looking for this!!!! Thanked!
I've compiled the CIFS modules (cifs.ko and md4.ko) for 10.4.2.13 in case anyone is looking for them.
How about 10.4.2.17?
Kwen said:
How about 10.4.2.17?
Click to expand...
Click to collapse
I couldn't get the kernel source from Asus.
The .tar.gz file inside the .rar file seems to be broken.
EnF70 said:
I couldn't get the kernel source from Asus.
The .tar.gz file inside the .rar file seems to be broken.
Click to expand...
Click to collapse
I've been away from the community for a short time working on a sigma bassed project, I'll see if I can get the new source and compile new modules
KAD79 said:
I've been away from the community for a short time working on a sigma bassed project, I'll see if I can get the new source and compile new modules
Click to expand...
Click to collapse
I seem to be having some difficulty with the official source code for 4.2.17, seems there's a lot of stuff missing,
maybe I'll try the repository from untermensch
but the compiled modules from 4.2.9 still load just fine
Cifs & Md4 module from firmware 10.4.2.17....moved on : http://forum.xda-developers.com/showthread.php?t=1953808 !
this worked great on hydro (minus the occasional hiccup), which one should we be using on cm10 (i want to use Paranoid, know it's based off of cm10).
thanks guys
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
pendragon11 said:
this worked great on hydro (minus the occasional hiccup), which one should we be using on cm10 (i want to use Paranoid, know it's based off of cm10).
thanks guys
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
How about you try and let us know
the first set of modules I compiled has successfully loaded on verious kernel versions
official
Hydro
several Rom's from surdu_petru
and even with the kernel from untermensch
what I haven't tried is CM10 or AOKP
Going to make the jump soon, I'll keep you posted
Sent from my VS910 4G using Tapatalk 2
bump, updated modules above
So, i started building CM10.1 using androidarmv6 sources which are known for working with msm7x27a. I modified my device folder and it builds.
Any help would be apreciated.
If anyone is intrested in development please join #Lproj on freenode to exchange ideas
Current status:
- It boots to GUI [L5&L7]
- Camera works [L5&L7]
- ril partially works (no outgoing calls)
- sdcard works
TODO:
- outgoing calls
- video rec
- audio routing in calls (l7 only?)
And the thank you award goes to the following: @PecanCM @cybojenix @adfad666
device folders
here speaks of cm10.1, but I tried it and I can not figure out if there are any differences or not :/ :http://forum.android.com.pl/f759/cm10-avatar-rom-extreme-291710/
michelemascia7 said:
here speaks of cm10.1, but I tried it and I can not figure out if there are any differences or not :/ :http://forum.android.com.pl/f759/cm10-avatar-rom-extreme-291710/
Click to expand...
Click to collapse
Go to Settings > System > About phone and make a screenshot please.
I want to see if it really is CM10.1
CM10.1
It is not clear cm10.1 just my version of the beta, made by me cm10.1 and avatar rom from nexus 4 and firmware LG optimus G.
My version cm10.1 not publish.
crinca15 said:
Go to Settings > System > About phone and make a screenshot please.
I want to see if it really is CM10.1
Click to expand...
Click to collapse
I have now flashed the pac rom of Metallica, and can not do a screenshot :/
evidently it is not 10.1 as confirmed @szymel0
I just tryed RC7 of it! Works nice. I jumped from PACman Rom to Avatar CM10.1 without wipe cache or data...
But do I need CM10.1 gapps ?
crinca15 said:
I just tryed RC7 of it! Works nice. I jumped from PACman Rom to Avatar CM10.1 without wipe cache or data...
But do I need CM10.1 gapps ?
Click to expand...
Click to collapse
i had flashed cm10 gapps but careful not to go off topic :silly:
Please stay ontopic
michelemascia7 said:
i had flashed cm10 gapps but careful not to go off topic :silly:
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=0B2Yt4LYuF0UuNDdEUXZYSmtxTFU&usp=sharing
RC9 Exists (Just to say, sry for off topic, had to say it)
EDIT : And I think you should ask some experience users of this, because they can help you (or not xD), I can´t help you, Since I entered on xda, I just did a ROM for galaxy gio, so a little of experience.
friends, i didn't understand one thing, i can flash Avatar EXTREME RC7 CM 10.1 , for my LG P700? or not is for our phone this rom? question by the read in this topic.
sorry for offs topic
your logcat say you are using normal qcom_display folder not legacy one and that's created this problem and which kernel you are using ? because
E/hwcomposer( 4290): FATAL:vsync_loop:not able to open file:/sys/class/graphics/fb0/vsync_event, No such file or directory
PecanCM said:
your logcat say you are using normal qcom_display folder not legacy one and that's created this problem and which kernel you are using ? because
E/hwcomposer( 4290): FATAL:vsync_loop:not able to open file:/sys/class/graphics/fb0/vsync_event, No such file or directory
Click to expand...
Click to collapse
I use qcom legacy from android armv6 and still get this error. Also I tried to use a branch from legacy droid that user adfad666 pointed me to and still getting the same error. I use stock 3.4.0 cm10 kernel. Are there any modifications I should make to kernel?
second logcat http://pastebin.com/6JGw1fvy
Sent from my LG-P700 using xda app-developers app
Maybe a problem with the drivers adreno 200?
I am not a developer (yet) but maybe try porting files from a device silmilar to ours and start modifying from there ??
Good luck on your work and hope you succeed
Sent from my LG-P700 using xda app-developers app
tudorsirb said:
I use qcom legacy from android armv6 and still get this error. Also I tried to use a branch from legacy droid that user adfad666 pointed me to and still getting the same error. I use stock 3.4.0 cm10 kernel. Are there any modifications I should make to kernel?
second logcat http://pastebin.com/6JGw1fvy
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
so 1st logcat with adfad666 display folder and 2nd logcat with androidarmv6 display folder right ? and i asked because it's strange you using stock cm10 kernel and vsync_event node not created
PecanCM said:
so 1st logcat with adfad666 display folder and 2nd logcat with androidarmv6 display folder right ? and i asked because it's strange you using stock cm10 kernel and vsync_event node not created
Click to expand...
Click to collapse
First is from a bad build where I forgot to add legacy. Second is from adfad's repo. with legacy I get the same errors.
EDIT: I use adreno blobs from cm10 should i use different ones for cm10? i also tried referece blobs from Qualcomm
Sent from my LG-P700 using xda app-developers app
tudorsirb said:
If anyone is intrested in development please join #p700 on freenode to exchange ideas
Click to expand...
Click to collapse
is this channel not being used then?
this morning I uploaded my device config for l5 which seemed to solve the egl error, however I haven't tried it since the last kernel, so don't even know if it boots (I was messing with the boot.img from alpha firmware, and source of the l3 ii)
hope this helps
cybojenix said:
is this channel not being used then?
this morning I uploaded my device config for l5 which seemed to solve the egl error, however I haven't tried it since the last kernel, so don't even know if it boots (I was messing with the boot.img from alpha firmware, and source of the l3 ii)
hope this helps
Click to expand...
Click to collapse
thanks, i fixed egl with it Now i'm stuck at boot animation with some weird errors.
tudorsirb you are my god!! I pray to you and hope cm10.1 will be finnished after the summer vacations!!
Sent from my LG-P700 using xda premium
ubuntuh said:
tudorsirb you are my god!! I pray to you and hope cm10.1 will be work after the summer vacations!!
Sent from my LG-P700 using xda premium
Click to expand...
Click to collapse
Thank cybojenix beacuse i'm getting loads of help from him