Related
I just rooted my incredible and I'm using the kernel that came with it stock. I disabled perflock and I left the max speed to 998 and the min speed to 245.
When I'm not doing anything on my incredible, I see that the speed constantly changes from the max to the min. Not even one second passes before it just goes back and forth, back and forth. Is this normal?
Coming from the d1 where it would stay at the min when idle, I'm not sure if what's going on with my incredible is normal.
Sent from my ADR6300 using XDA App
Yes that's normal. For better battery life, I'd try a kernel with smartass governor. It spends more time on the lower frequencies.
Sent from my ADR6300 using Tapatalk
Switching to a different kernel will give you the ability to overlook//underfoot the system needed.. this in turn increases battery life.. kingklick, ziggy's, chad's kernel are all well known kernels.. you will want to play with different kernels.. not every kernel will be stable to overlook to certain speeds on certain Rom's.. switching kernels is almost as addictive as switching roms.. always nandroid before flashing anything..
Sent from my ADR6300 using XDA App
Typos on my end.. underfoot = undervolt.. overlook = overlook.
Sent from my ADR6300 using XDA App
Will those kernels work on my rooted stock incredible?
Sent from my ADR6300 using XDA App
Yea! By stock i'm assuming all you did was root. I am currently running SkyRaider 3.5 Sense along with
"2.6.32.26-ubcredujuerbek-12082010 [email protected] #11"
I will edit with links to these two items.
SkyRaider 3.5 Sense - SkyRaider
Chad's Kernel - Incredikernel
My phone runs amazingly fast with sense but yet, even with heavy usage (Texting constantly, on the internet, gmail, even Fring) I can go an easy 24 hours on one charge. If my phone stays screen-off idle I could last at 95%-100% for several hours.
Yes, all I did was root.
Does the chad kernel provide wireless tether and will i still need to disable perflock in setcpu?
Sent from my ADR6300 using XDA App
the non stock kernels all disable perflock already, you do not need to do it..
flash the kernel via clockwork, and you are set.. jump into setcpu and adjust some settings and add profiles.. you'll be golden..
What he said ^^
Sent from my ADR6300 using XDA App
20twins10 said:
the non stock kernels all disable perflock already, you do not need to do it..
flash the kernel via clockwork, and you are set.. jump into setcpu and adjust some settings and add profiles.. you'll be golden..
Click to expand...
Click to collapse
Not quite. I believe Lou's has some tweaks within perflock, so disabling it would lose those.
And most kernel devs, particularly Lou and the ones who use HAVS, advise against using SetCPU. I'd check with your chosen kernel thread for details.
Sent from my ADR6300 using Tapatalk
Also, I wouldn't 'set on boot', at least till you find frequencies that your phone can handle safely. Otherwise, you'll get a 'crash' loop, where your phone starts up just fine, but once you go past the initial lockscreen it'll crash and reboot. Very annoying...
Sent from my Incredible using XDA App
what rager said... ive put on kernels and ran em high only to get a "boot loop".. its tuff to get out of cause you need to get back into setcpu to scale back otherwise it keep on going.... i learned to put the setcpu app icon on my main screen so i can get there fast to scale back..
http://forum.xda-developers.com/showthread.php?t=866736 can you install these with the stock rom. i wanted to experiment to get better battery life but didnt really want to install a different one.
keith4321 said:
http://forum.xda-developers.com/showthread.php?t=866736 can you install these with the stock rom. i wanted to experiment to get better battery life but didnt really want to install a different one.
Click to expand...
Click to collapse
Some. Make sure it's a sense version if you're using stock sense.
Sent from my ADR6300 using Tapatalk
Mr. Rager said:
Also, I wouldn't 'set on boot', at least till you find frequencies that your phone can handle safely. Otherwise, you'll get a 'crash' loop, where your phone starts up just fine, but once you go past the initial lockscreen it'll crash and reboot. Very annoying...
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
That exact thing happened to me...pissed me off like crazy at first I was clueless then I just did a restore
Sent from my ADR6300 using XDA App
Yeah, if you let it boot loop too long it'll hard boot, which is where the phone cuts off completely. That has happened to me, and it ruins apps.
Sent from my Incredible using XDA App
I have found this link but it doesn't say anything about being "beta 8"...
http://forum.xda-developers.com/showthread.php?t=848453
Can anyone assist?
Thanks!
Page 298, Chad posted a download link.
Sent from my ADR6300 using XDA App
Thanks! I would have never found that. Unfortunately, the link is broken or (more likely) the server is down. I'll give it a try later.
Thanks!
I have it, if you hold on a sec I'll try to get it uploaded or a link. Not used to uploading from my phone.
Sent from my ADR6300 using XDA App
k_nivesout said:
I have it, if you hold on a sec I'll try to get it uploaded or a link. Not used to uploading from my phone.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I FOUND IT. It's actually linked at the bottom of the first page of this thread. I thought it would be the old one but it's updated.
Thanks!!!!
http://db.tt/b1YMeKf
Ah, and I signed up for dropbox, uploaded it and everything. Haha oh well, there's another link.
Sent from my ADR6300 using XDA App
Very cool of you.
Now trying to see if it actually worked and then see if it actually produces any benefits.
No problem! I've been running beta 8 for most of today and its been nice. My settings are 128/1113, smartass governor. Chad's new ingenious governor is coming along nicely, I just find smartass to be a bit more stable for CPU intensive apps.
Sent from my ADR6300 using XDA App
k_nivesout said:
No problem! I've been running beta 8 for most of today and its been nice. My settings are 128/1113, smartass governor. Chad's new ingenious governor is coming along nicely, I just find smartass to be a bit more stable for CPU intensive apps.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
You just stepped about 2 jumps ahead of where I am. I have SetCPU and I assume that's where you find the smartass governor. So it's wise to switch to that?
I had a fail here. None of my SD card app's icons loaded. I had the same problem when I upgraded to CM#90. I think I know how to fix it...
Sorry about the lingo haha, yes, I believe you can set the governor in setCPU. I'm using cyanogenmod which has built in performance settings and I've heard using that WITH setCPU can cause conflicts. I was just saying that I set my minimum to 128mhz and max to 1113mhz and use the smartass governor. As I understand it, the governor controls how the CPU scales for certain tasks, etc. I think the smartass governor is made for performance and efficiency (I.E turning CPU usage down when screen is off then increasing CPU with usage). Chad's new "ingenious" governor also does this but is new and improved, however does have some issues and thus still a beta kernel. Hopefully that made some sense!
Sent from my ADR6300 using XDA App
I haven't played around with the CM performance settings. I might just uninstall setCPU for now and use those. I don't need any more conflicts!
All you need is in that performance menu, the governor you choose takes care of what you would use profiles in setCPU for.
Sent from my ADR6300 using XDA App
Well... b8 does not install correctly for me. I don't get my icons for apps on the SD card. I tried clearing my cache, battery, dlavik first then installed. No icons. Rebooted again too.
I had the same problem on the update to CM#90 but clearing all those caches resolved it.
I would go report this on the main thread but it won't let me post. I'll have to wait and let Cyanogenmod update its kernel along the way.
So you're missing icons for apps that are installed on SD? Did you install them directly to SD or move them later? Where is it that the icons are missing from, the app drawer, home screen, etc? I have some apps on my sd and I've never heard of that happening, I'd be interested to see what's causing it.
Sent from my ADR6300 using XDA App
I installed them normally then moved them to the SD card. Its the icons on the home screens. They appear normally in the app drawer. I have no clue why they won't load. I know that clearing all those caches and manually installing the ROM eliminates the problem.
I am just assuming it's the apps on the SD card. I guess I should pay a lot closer attention next time. It is a great deal of the icons. Maybe it's just the apps I moved that apps2sd did not suggest but I moved them anyway.
Still waiting for build #91 thinking maybe it addressed the problem.
I have read before that any apps with widgets need to be on internal storage.
Sent from my ADR6300 using XDA App
me too. But these aren't widgets. They all come back when I perform that ritual of deleting all the caches. Just not with b8.
Weird, I thought you said icons but that was the only thing I could think of that might cause that issue. If you flash another kernel, the icons come back though?
Sent from my ADR6300 using XDA App
anw, is this kernel works on [sense 2.1] gingersense remix b4 by wdfowty?
I'm running back into the problem of custom Roms freezing on me, no FC's, just the phone freezing and requiring a battery pull to re-boot. I odin EC05 plus, let it boot and sit for a few minutes, reboot, let it convert, flash cwm purple, wipe, then flash whatever rom, and eventualy they all freeze.
The only roms to never give me that problem is CM7, MIUI and true stock.
Tried everything, except for not using the stock cable, but even still, cm7 and miui have no problem.
Sent from my SPH-D700 using XDA App
I've had the same problem with SRF 1.2...and I linked the problem to certain SetCPU settings like on demand and userspace and to undervolting to much in the higher OC'd frequency ranges...even though I've experimented wih these settings and found a somewhat stable medium...I still get the random freezes once in a blue...I don't know what else it could be.
Sent from my rooted, suited, & booted Epic 4G kno dat!
Right now I'm on SRF with the 1.1.1 Kernel, using setCPU 200-1000, cfq, and no undervolting at all. I was on the 1.1.0 Kernel using voltage control when I had it freeze. I've uninstalled voltage control and galaxy tuner. Oddly enough setcpu dosent fc when I go into the voltages, which it did a few flashes back.
Sent from my SPH-D700 using XDA App
What problems do you think Galaxy tuner was giving you...I'm using it right now?
Sent from my rooted, suited, & booted Epic 4G kno dat!
I wasn't sure, but I figured with using setcpu it would be best to uninstall it so there wasn't any sort of conflicts between the two.
Sent from my SPH-D700 using XDA App
I'm not sure I follow where the conflict btwn those 2 apps would be...once controls cpu speed, governing, and voltage...and the other controls screen brightness and sound attributes...not trynna be a smart ass I'm just trynna make the connection?
Sent from my rooted, suited, & booted Epic 4G kno dat!
In galaxy tuner there is some options for overclocking, as well as IO scheduling.
Sent from my SPH-D700 using XDA App
At any rate. Ill sell you my phone fully uv and tweaked for max battery and speed
Sent from my SPH-D700 using XDA Premium App
You didn't read my OP, I have no problems at all with FC's, my problem is the phone freezes and I have to pull the battery to restart.
Custodian said:
At any rate. Sounds like your phone is garbage. Make sure you enable journaling to help mend the fc's.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA App
Skimp Killah said:
You didn't read my OP, I have no problems at all with FC's, my problem is the phone freezes and I have to pull the battery to restart.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
If you aren't undervolting and are having this issue on multiple ROMs, it sounds like a conflict between some apps like you suspected. That or something is not right with your phone. Freezes happen to me when undervolting too much but you aren't doing that....edit...maybe your phone just doesn't like the 200 minimum that well. If I remember right, stock values are 1000 max and 400 min.
Sent from my SPH-D700 using XDA Premium App
I'm wondering if maybe the 200mhz is whats doing it then, I always figured 200-1000 was stock, and the phone would only freeze when the screen was off. Right now I'm using setCPU with it set at 200-1000 with cfq IO scheduling. If I have more freezes I will try bumping up to 400-1000.
JohnCorleone said:
If you aren't undervolting and are having this issue on multiple ROMs, it sounds like a conflict between some apps like you suspected. That or something is not right with your phone. Freezes happen to me when undervolting too much but you aren't doing that....edit...maybe your phone just doesn't like the 200 minimum that well. If I remember right, stock values are 1000 max and 400 min.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
im currently undervolted with the aosp rom from dub with genocide's final kernel...200mhz is perfectly fine...if 200 is underclocked too low or other frequencies are too low...sod or freezes will happen with the frequency with the wrong voltage is reached..i have setcpu and voltage control together but mainly use the new setcpu...when idling, i see a 1 percent draw in 2 hours and 6 minutes...and use stability test whenever you underclock to see if it safe to use...just my 2 cents...
So I have cm7 with samuri (sp) kernal. My gprs automatically turns on when ever it feels like. My phone is alwyas on airplane mode, ALWAYS, yet gprs turns on and starts killing battery.
Any ideas?
Sent from my SPH-D700 using XDA
SubCool said:
So I have cm7 with samuri (sp) kernal. My gprs automatically turns on when ever it feels like. My phone is alwyas on airplane mode, ALWAYS, yet gprs turns on and starts killing battery.
Any ideas?
Sent from my SPH-D700 using XDA
Click to expand...
Click to collapse
Use the latest CM7 nighty build cm-7-20120617-NIGHTLY-epicmtd.zip
Also stick with the stock kernel the rom comes with.
SubCool said:
So I have cm7 with samuri (sp) kernal. My gprs automatically turns on when ever it feels like. My phone is alwyas on airplane mode, ALWAYS, yet gprs turns on and starts killing battery.
Any ideas?
Sent from my SPH-D700 using XDA
Click to expand...
Click to collapse
Yeah I got one....post questions in Q&A!
Thread moved
FNM
Sent from my PantechP4100 using xda premium
Thanks for the move.
I was looking for help without going stock.
Sent from my SPH-D700 using XDA
No he means reflash the latest nightly and stick with the kernel it comes with. If that don't work you will have to Odin.
Sent from my SPH-D700 using xda premium
kennyglass123 said:
No he means reflash the latest nightly and stick with the kernel it comes with. If that don't work you will have to Odin.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I understood, but i dont want stock kernel. Im using samurai for OC.
SubCool said:
I understood, but i dont want stock kernel. Im using samurai for OC.
Click to expand...
Click to collapse
Stock kernel has oc.
Sent from my SPH-D700 CM9 ANDROID 4.0.4
Zeinzu said:
Stock kernel has oc.
Sent from my SPH-D700 CM9 ANDROID 4.0.4
Click to expand...
Click to collapse
I have yet to flash my comp and OC without paying for an app.
SubCool said:
I have yet to flash my comp and OC without paying for an app.
Click to expand...
Click to collapse
Cm7 has both overclock to 1.2ghz and built in performance settings to enable overclock.
Sent from my SPH-D700 CM9 ANDROID 4.0.4
Zeinzu said:
Cm7 has both overclock to 1.2ghz and built in performance settings to enable overclock.
Sent from my SPH-D700 CM9 ANDROID 4.0.4
Click to expand...
Click to collapse
When i look in settings, under tweaks.. and OC- i see it set no higher or allowing higher than 1000.
My Question remains- WHY is my GPRS automatically turning on, especially with Airplane mode on. I thought it was connected to my WIFI, but it turns on even if i have wifi off.
Do you actually mean gprs the gsm technology or do you really mean gps?
I doubt gprs is turning on since this is a cdma phone that doesn't support it.
Sent from my SPH-D700 using Tapatalk 2
SubCool said:
When i look in settings, under tweaks.. and OC- i see it set no higher or allowing higher than 1000.
My Question remains- WHY is my GPRS automatically turning on, especially with Airplane mode on. I thought it was connected to my WIFI, but it turns on even if i have wifi off.
Click to expand...
Click to collapse
Well eliminate one factor by flashing the latest nightly with stock kernel which allows you to OC within by going to settings/cyanogenmod settings/performance/ there will be a setting to allow for 1200 OC.
OR
Now that you have over 10 post ask in your kernels thread.
The software says gprs. I still basically mean data, not wifi. It appears to use a lot of power.
It is always on.
Sent from my SPH-D700 using XDA
I just flashed with the new nightly, I still have data issues, and I don'tsee the option to OC. I'll do a fresh format and image to remove doubt.
Sent from my SPH-D700 using XDA
I've been having issues backing everything up so i can do a fresh flash. But- does anyone have anything on this?
Ok- I just formatted my phone and
Flashed it. Upon flash of nightly - without recovering any apps or anythjng' my phone did not show the oc of anything. After installing go apps, my phone showed mobile data on and in use.
After that I installed my samuri kernel and fully recovered my pps. I thought that maybe go switch widget was initiating the mobile data... but it isn't. Any ideas?
Sent from my SPH-D700 using xda app-developers app
Once again, formatted fresh. Rc2, no oc, mobile data persistent on, home button doesn't work until reboot and install of some apps.
Help please.
Sent from my SPH-D700 using xda app-developers app
So, after messing with my issue a bit further. I have come to notice that the Mobile Data turns it's self on in either timely increments (once every 5-10 mins) Or It is scheduled to turn on every time the device is unlocked. My "Go Power" thing has reported that the Mobile data a lone is using up about 1/4 the power.
Also, i STILL have no seen ANY Over Clock option in ANY stock variable of this installation.
I HAVE noticed that every time i clean flash my phone, the home button does not work until at least a reboot of the device.
What is the latest version of gapps. available? I went to the IRC- and everyone pointed over to the ICS package, which i did try and it really killed my phone. I Have to stick with the Gingerbread.
Bump
SubCool said:
So, after messing with my issue a bit further. I have come to notice that the Mobile Data turns it's self on in either timely increments (once every 5-10 mins) Or It is scheduled to turn on every time the device is unlocked. My "Go Power" thing has reported that the Mobile data a lone is using up about 1/4 the power.
Also, i STILL have no seen ANY Over Clock option in ANY stock variable of this installation.
I HAVE noticed that every time i clean flash my phone, the home button does not work until at least a reboot of the device.
What is the latest version of gapps. available? I went to the IRC- and everyone pointed over to the ICS package, which i did try and it really killed my phone. I Have to stick with the Gingerbread.
Click to expand...
Click to collapse
So. anyone? -
Don't some power saving apps cycle data off and on on a schedule, rather than "always on"? If the problem started after you installed go power, or other battery saving apps/tweaks, I'd try uninstalling them.
ive been running ICS since i got my phone, the battery life was horrible until i fixed the power profile, but even after that my phone's battery was not that good. i decided to flash CM10, then i switched to AOKP, both of them are awesome, but i noticed that the battery wasnt that good either, i got the ktonnsez kernel. i tried other governors, they all stay at maximum (1512MHz) after about 5 minutes of a reboot. i tried basically everything, reflash every thing, wiped everything possible. I need help plz, i wanna enjoy my S3 without worrying about the battery dying.
its all normal when i start my phone, but after 5 minutes it just stays at maximum CPU...idk why plz help im on galaxy s3 ATT i747M...i searched everywhere but still didnt find the answer
If you flashed kt747 you need to use the ktweaker app that comes with the kernel. When you find this app you need to check the two boxes into general settings
Sent from my SGH-I747 using xda app-developers app
http://db.tt/vANjN5VP
Sent from my SGH-I747 using xda app-developers app
Have you solved this yet?
Try a different governor. Personally I use on demand and noop for the scheduler.
Make sure you don't have any other overclocking programs which may be conflicting. I used to use SetCPU but with the toonz kernel I get Ktweaker. So I got rid of SetCPU.
Funny yours is locking at maximum. Mine used to lock at 96Mhz and run like crap. The above method worked for me. Don't forget to make sure your running the most updated kernel, wipe cache/dalvik/fix permissions.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
liltitiz said:
If you flashed kt747 you need to use the ktweaker app that comes with the kernel. When you find this app you need to check the two boxes into general settings
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Tyvm, i did what u told me and its working for now, i was using ktweaker the whole time, but i like to check my current speed in ROM control, idk why maybe cuz the numbers are bigger? ;P im still not sure if its going to work for a long time, i did a reflash yesterday, i charged my phone at 100 percent last night, and it was sitting on low frequency, when i woke up, i was suprised to see a 6% drop of the battery, leaving me 94% left. but the speed was at 1512. and cell standby was using most of the battery.
g2tegg said:
Have you solved this yet?
Try a different governor. Personally I use on demand and noop for the scheduler.
Make sure you don't have any other overclocking programs which may be conflicting. I used to use SetCPU but with the toonz kernel I get Ktweaker. So I got rid of SetCPU.
Funny yours is locking at maximum. Mine used to lock at 96Mhz and run like crap. The above method worked for me. Don't forget to make sure your running the most updated kernel, wipe cache/dalvik/fix permissions.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
TY, ive tried switching governors before and it didnt work. But when i tried this morning, it worked... really strange.
Idk if it will last long, my phone likes to jump around from normal to maximum without me even touching the phone
Use ktweaker instead of the rom settings. Go to the performance section in settings and disable set on boot. Then, go to ktweaker and set as "apply settings immediately after boot". Once you're done, set to whatever you want it to be.
Sent from my SGH-I747 using Tapatalk 2