I was in CWM, cleared cache and davlik. Forgot to load the newest ROM, so I rebooted and on restart, phone went into Android updating screen. What was processed? The update.zip file that was already on the phone? Or it reinstalled the last ROM processed in CWM?
Went ahead and installed the latest ROM, so far no issues. Just wondering if I need to restore nandroid and reinstall latest ROM, or no harm no foul.
Android is rebuilding the cache that you had just wiped in recovery. You should be okay but if you start to experience some issues, you can go back into recovery and clear the cache and dalvik again and let it rebuild with the new ROM installed.
Good thought
gbarayah said:
Android is rebuilding the cache that you had just wiped in recovery. You should be okay but if you start to experience some issues, you can go back into recovery and clear the cache and dalvik again and let it rebuild with the new ROM installed.
Click to expand...
Click to collapse
I hadn't thought of that method. Thanks.
Related
Just did a clean install of Anthem v2.1 and everything booted up fine. I went into recovery, wiped data, dalvik, and cache, and installed the latest gingertiny kernel. When I reboot from recovery, I get bootloop. What's wrong?
prinzmetal6 said:
Just did a clean install of Anthem v2.1 and everything booted up fine. I went into recovery, wiped data, dalvik, and cache, and installed the latest gingertiny kernel. When I reboot from recovery, I get bootloop. What's wrong?
Click to expand...
Click to collapse
Thats because you wiped data. You should only wipe dalvik-cache and the cache partition.
cmlusco said:
Thats because you wiped data. You should only wipe dalvik-cache and the cache partition.
Click to expand...
Click to collapse
Thank you!
cmlusco said:
Thats because you wiped data. You should only wipe dalvik-cache and the cache partition.
Click to expand...
Click to collapse
Just to add to this. NEVER wipe data after flashing a Sense 3 or Sense 3.5 ROM. Actually even some Sense 2.1 ROMs that is a bad idea.
This is because the way these ROMS are built as the storage in /system cannot hold the whole ROM so they have to build part of it in /data. So wiping data will clear the ROM components as well as the user data. If you have to wipe data, plan to reflash the ROM again. So I say don't wipe data AFTER flashing the ROM unless you plan on reflashing the ROM. You can and will probably need to wipe data before flashing the ROM though.
Is there a reason why Titanium Backup isn't working? When I try to restore the progress bar just doesn't do anything...I had this problem with my Galaxy Tab and I had to change the app processing mode but is there a different issue?
prinzmetal6 said:
Is there a reason why Titanium Backup isn't working? When I try to restore the progress bar just doesn't do anything...I had this problem with my Galaxy Tab and I had to change the app processing mode but is there a different issue?
Click to expand...
Click to collapse
Make sure USB debuggging is on. If it is, I don't know.
I think the problem is that I ran out of internal memory, I have a huge sd card so I think I can solve this problem. Thank you for replying though. I would've posted something on the actual rom page but I don't have enough thumbs up
Okay, I was on AOKP M4 and I wanted to upgrade to M5.
So I backup everything and make a backup of my ROM. I wipe the phone and caches and flash M5 with the GAPPS, with the latest CWM touch recovery. When my phone reboots I notice I have the same wallpaper as before and when I unlock my phone my pin is still requested and all of my apps and settings stayed exactly the same. I was never asked to sign into my Google account and the start up/set up screen never came up. I checked to see if I even updated and yes I was on M5. Now the ROM isn't very fast or smooth and I get a lot of force closes and things not working properly.
I tried the whole process again with the CWM non-touch recovery, and again my phone did not fully wipe and all my apps and setting remained exactly the same.
I tried it again with the TWRP touch recovery, and again my phone did not fully wipe and everything was the same and my phone remains kind of slow and I'm getting a lot of force closes.
Why is my phone not fully wiping? What can I do to fix this?
I would really appreciate some help!
you need to wipe factory / data.
wiping cache and dalvik doesn't wipe "/system/etc etc etc"
1. Wipe Factory
2. Wipe Data
3. Wipe Dalvik
4. Flash ROM
5. Flash Gapps.
6. Flash Kernel
for full wipe.
zephiK said:
you need to wipe factory / data.
wiping cache and dalvik doesn't wipe "/system/etc etc etc"
1. Wipe Factory
2. Wipe Data
3. Wipe Dalvik
4. Flash ROM
5. Flash Gapps.
6. Flash Kernel
for full wipe.
Click to expand...
Click to collapse
Yes, that is what I'm doing. I'm wiping factory/data and I'm still having the same problem
Like with the TWRP recovery, I went to wipe, I hit factory reset, then cache, then dalvik cache and then flashed the ROM and GAPPS and all my apps and settings stayed the same. It was like if I had dirty flashed it. I don't understand what's going on.
zephiK said:
you need to wipe factory / data.
wiping cache and dalvik doesn't wipe "/system/etc etc etc"
1. Wipe Factory
2. Wipe Data
3. Wipe Dalvik
***FORMAT /SYSTEM*** (under mount in CWM I believe)
4. Flash ROM
5. Flash Gapps.
6. Flash Kernel
for full wipe.
Click to expand...
Click to collapse
Try that additional step too. May or may not help
Sent from my Galaxy Nexus using XDA
killyouridols said:
Try that additional step too. May or may not help
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
What does that do exactly? Would I have to worry about my media and sd card being wiped?
SubyWill said:
What does that do exactly? Would I have to worry about my media and sd card being wiped?
Click to expand...
Click to collapse
No, all music, pictures ect will still be in place.
Sent from my Galaxy Nexus using XDA
Okay thank you, I guess this time in TWRP I'll do factory reset, cache, dalvik cache, and system and see if it works out
Okay, so I did factory reset, cache, dalvik cache, and format system.
I flashed M5 and GAPPS, rebooted and everything was still the same. My phone did not fully wipe.
I don't understand what's going. I'm so frustrated right now
SubyWill said:
Okay, so I did factory reset, cache, dalvik cache, and format system.
I flashed M5 and GAPPS, rebooted and everything was still the same. My phone did not fully wipe.
I don't understand what's going. I'm so frustrated right now
Click to expand...
Click to collapse
I would do a factory reset, if that doesn`t help flash a stock rom and root your phone again. BTW don`t you have a nandroid backup to revert to
gee2012 said:
I would do a factory reset, if that doesn`t help flash a stock rom and root your phone again. BTW don`t you have a nandroid backup to revert to
Click to expand...
Click to collapse
I have a nandroid backup, but that doesn't solve the problem of my phone not wiping.
I guess I'll unroot my phone and lock the bootloader and re-do everything to see. I don't understand why my phone isn't wiping correctly.
sometimes cwm just doesnt work with factory wipe. i've used it a few times now and sometimes it works and sometimes it doesnt. i have no idea why. you can try doing a factory wipe from the phone settings>backup and reset. ive only done that twice but it worked both times. if that still doesnt work just go with a fresh flash of google images using fastboot.
SubyWill said:
I have a nandroid backup, but that doesn't solve the problem of my phone not wiping.
I guess I'll unroot my phone and lock the bootloader and re-do everything to see. I don't understand why my phone isn't wiping correctly.
Click to expand...
Click to collapse
Init.d folders can only be wiped with a factory reset afaik, or manualy off course. By locking and unlocking the phone you perform a factory reset anyway, so i would flash a stock rom and start fresh. No chance on left files or scripts. You can do it with GNex Toolkit, option 8. Put the downloaded and not extracted .tgz file here C:\Galaxy Nexus ToolKit\put_google_factory_image_here and flash.
Thanks guys, I'll try that!
I Have TWRP 2.0 And When I Go To Install Any Other Rom Besides The Stock Backup I Made It Installs Fine But When I Boot Up The Rom It Stays In Bootloop Any Suggestions?
It sounds exactly like you didn't perform a "factory reset" before installing a new rom.
wipe wipe wipe
You should factory reset in twrp
the bootlooping u r facing is due to messed files of stock plus newly installed rom
first factory reset,wipe cache,dalvik cache install new rom then u will be fine
Adeel1234 said:
the bootlooping u r facing is due to messed files of stock plus newly installed rom
first factory reset,wipe cache,dalvik cache install new rom then u will be fine
Click to expand...
Click to collapse
ok thanks guys I'll try that out.
I want to update my Unofficial CM10 +3.x Kernel to the latest update from Hashcode.
UNOFFICIAL CM10 + 3.x Kernel for Kindle Fire [09/16 CHARGING+]
When you do an update like this, do you wipe everything like I did when I first flashed the ROM? I mean, when I installed, I wiped system, factory reset, cache and dalvik cache. Then I flashed the ROM and then I flashed gapps.
So now I just want to update the OS, what do I need to wipe? And will I need to flash gapps again?
CAn't ask this in the development thread 'cause my n00b hat it still too shiney.
Thanks!
A question like this doesn't belong in the development thread because it isn't development related.
If you're going from one ROM to a different one, you need to wipe System and Factory Reset (data and cache).
If the ROM is simply an update of an existing ROM, generally all you need to wipe is data and cache. There are always exceptions to this so it's always a good idea to make a backup in case things turn sour.
After installation of the ROM you have the option to wipe cache and dalvik. It isn't required but not wiping them has been known to cause some bugginess.
soupmagnet said:
A question like this doesn't belong in the development thread because it isn't development related.
If you're going from one ROM to a different one, you need to wipe System and Factory Reset (data and cache).
If the ROM is simply an update of an existing ROM, generally all you need to wipe is data and cache. There are always exceptions to this so it's always a good idea to make a backup in case things turn sour.
After installation of the ROM you have the option to wipe cache and dalvik. It isn't required but not wiping them has been known to cause some bugginess.
Click to expand...
Click to collapse
Thank you once again, soupmagnet. Yeah this is just an update to my current ROM. So .... I won't need to flash gapps again?
I'm slowly figuring this stuff out. hehehe... When I was 30 I picked this stuff up quick. Turning 60 on Thursday and stuff tends to need a little more pondering lately. hahaha
Anywho.... thanks
Oh, yeah. You need to flash Gapps if you wipe system.
soupmagnet said:
Oh, yeah. You need to flash Gapps if you wipe system.
Click to expand...
Click to collapse
OK, see, now you're messin' with the old man here... hehehe
On one hand I'm hearing if I am only updating my current ROM, I just wipe data and cache.
Then you tell me I have to flash gapps if I wipe System.
But prior you said I only need to wipe system if I'm going from one ROM to a different ROM.
So.... I'm just updating my current ROM. I wipe data and cache, flash the updated ROM, wipe dalvik.... done...
no flash gapps, right?
I need to look at TWRP again to see exactly how it presents the choices. Don't be hatin' on the old guy for bein' dumb now.
OK, booted to TWRP. When I select Wipe my choices are : Cache, Dalvik Cache, Factory Reset, System and then External Storage. So... in your first answer to me when you said to go to a different ROM I should wipe "System and Factory Reset (data and cache)" it appears you are telling me that "System and Factory Reset" is another way of referring to "data and cache". Is that correct?
Gapps go in the /system/app folder so if you wipe the system partition, Gapps will go along with it.
soupmagnet said:
Gapps go in the /system/app folder so if you wipe the system partition, Gapps will go along with it.
Click to expand...
Click to collapse
GAaaahhh..... I just wiped System and watched as it processed /system
and then I wiped Factory Reset and watched as it processed /data and /cache
So I guess that answers my confusion.
Hey all,
I've been searching for a while now and decided I should just post my question finally. I have the Galaxy SIII, rooted, and running CM10 stable. For the last 3 months or so, my SMS app, Messaging, has been randomly force closing and crashing. The only way to fix it is by rebooting the phone. I've tried re-flashing the mod 5 times, and even wiped data and done 2 factory resets. Still no luck.
And more recently my "phone" app has been doing it too. It crashes when I open up the dial pad and drops calls randomly and I have to restart my phone for it to work again.
Both of these will happen randomly. Sometimes I can go 4 hours without having to restart my phone, other times I have to restart my phone every 20 minutes. It's really starting to bug me.
Is there an app that's known to cause these crashes? Or is there a possibility that the mod file is corrupt? Thoughts? Questions? Any help is appreciated!!
When you flashed Cm10, did you come from stock or a custom rom? Did you also format /system?
If you made a nandroid while on stock, I would:
Wipe data, cache, dalvik and restore that. Then (assuming you still have Cm10 and gapps zips on your device) I would wipe data and caches again, format /system and flash rom/gapps. Wipe data/cache and reboot.
xBeerdroiDx said:
When you flashed Cm10, did you come from stock or a custom rom? Did you also format /system?
If you made a nandroid while on stock, I would:
Wipe data, cache, dalvik and restore that. Then (assuming you still have Cm10 and gapps zips on your device) I would wipe data and caches again, format /system and flash rom/gapps. Wipe data/cache and reboot.
Click to expand...
Click to collapse
When I flashed, it was from a previous CM10 ROM that worked fine. I reflashed because one of my apps was getting an "unknown" error, and now this crashing is happening. I don't think I have ever done "format /system". How do I go about that?
tango259 said:
When I flashed, it was from a previous CM10 ROM that worked fine. I reflashed because one of my apps was getting an "unknown" error, and now this crashing is happening. I don't think I have ever done "format /system". How do I go about that?
Click to expand...
Click to collapse
To have a completely clean install, you should always:
Wipe data
Wipe cache
Wipe dalvik (under advanced)
Format /system (under mounts and storage)
Flash rom
Flash gapps
Wipe data
Reboot
Be sure to have whatever you feel important backed up as this will wipe your system. Make a nandroid first if you don't already have one
xBeerdroiDx said:
To have a completely clean install, you should always:
Wipe data
Wipe cache
Wipe dalvik (under advanced)
Format /system (under mounts and storage)
Flash rom
Flash gapps
Wipe data
Reboot
Be sure to have whatever you feel important backed up as this will wipe your system. Make a nandroid first if you don't already have one
Click to expand...
Click to collapse
Thanks!! I'll try it tonight and post with the results tomorrow. Last time I flashed it took 2 days until the problems arose again.
tango259 said:
Thanks!! I'll try it tonight and post with the results tomorrow. Last time I flashed it took 2 days until the problems arose again.
Click to expand...
Click to collapse
There shouldn't be any issues if you have flashed correctly. Many users have also noted that a custom rom performs better when returning to stock and then flashing the new rom via the above procedures. Feel free to pm me your results
What the???
xBeerdroiDx said:
There shouldn't be any issues if you have flashed correctly. Many users have also noted that a custom rom performs better when returning to stock and then flashing the new rom via the above procedures. Feel free to pm me your results
Click to expand...
Click to collapse
To have a completely clean install, you should always:
Wipe data
Wipe cache
Wipe dalvik (under advanced)
Format /system (under mounts and storage)
Flash rom
Flash gapps
Wipe data <------------- ????
Reboot
I can't see this is a good thing, but I'm a noob.
You're saying after installing the new ROM and apps (Flash rom Flash gapps), you then go back into CWM and select 'wipe data/factory reset'??
Again, I'm a noob and maybe I'm reading this wrong!
Doing a wipe again right after installing a new ROM sounds so wrong to me.
What would that do?
RoidRulez said:
Wipe data <------------- ????
Click to expand...
Click to collapse
This step (step 7 in your list) isn't necessary.
When in doubt, follow the directions in the OP of the rom you are trying to flash, usually can't go wrong.