Develop Bugs

[KERNEL][MARVELC][A510c][SENSE] 2.6.35 Jmz Wildfire S OC Kernel 18FEB12

Disclaimer: Flash this kernel at your own risk. I am not responsible for what you do on your device. Please remember to give credit where credit is due.
This is forked from simonsimons34 OC kernel, just with many more features added in.
Features:
-Under/Overclock from 120MHz to 806MHz
-Governors: lazy, smartass, smartassv2, interactiveX, interactive, conservative, ondemand, userspace, powersave, and performance.
-Speed tweaks
-Works with EXT2, EXT3, EXT4 filesystems
-Support Swap.
-Many other changes but I forget.
WARNINGS: 806MHz is only an option. If you choose to use it at that level for extended periods of time that is your fault.
Download
First kernel listed in Rom Manager
Thanks:
Adrynalyne: helped me a lot
simonsimons34: for source
Utkanos: helped me figure out how I kept breaking boot.img

Thanks going to try it.
Edit: running great full blast. No issues yet. Camera and video, WiFi, data, apps and market works great. Will keep testing ;-)
Marvel Custom

Thank you finally some more people are working on our phones thank you very much
Sent from my HTC_A510c using Tapatalk

Hey ive seen you forked it. Mind if i take a look at your config. I keep getting problems with wifi. Ive tried almost everything besides a new config file. Do plan to give credit. Im only using it for my wifi actually. Thanks for giving credit btw. Heads up if you left my source the same, 800mhz is over volted too. slots 1-3 undervolt 4-6 normal volt slot 7 (800) is overvloted

simonsimons34 said:
Hey ive seen you forked it. Mind if i take a look at your config. I keep getting problems with wifi. Ive tried almost everything besides a new config file. Do plan to give credit. Im only using it for my wifi actually. Thanks for giving credit btw. Heads up if you left my source the same, 800mhz is over volted too. slots 1-3 undervolt 4-6 normal volt slot 7 (800) is overvloted
Click to expand...
Click to collapse
I built your kernel as soon as I forked it. I had no issues with WiFi. You just have to use the modules from the kernel. I changed up the oc also. But that's why its there. For people to use.
Sent from my HTC_A510c using xda premium

okay thanks. Its strange i used the modules and it didnt work. I think it has to do with the .config im using i was messing with settings a while back. PS i found some iteresting things you can do in the boot.img you have on your flashable zip. PM me and i can send you a ramdisk to compare. Believe it or not usb tether is enabled at this lowest level

simonsimons34 said:
okay thanks. Its strange i used the modules and it didnt work. I think it has to do with the .config im using i was messing with settings a while back. PS i found some iteresting things you can do in the boot.img you have on your flashable zip. PM me and i can send you a ramdisk to compare. Believe it or not usb tether is enabled at this lowest level
Click to expand...
Click to collapse
I don't believe I changed anything in the config. Except to add my governors. Just check out my commits and you will see all the changes I made.

will do thanks

im installing this on simonsCM7 rom, it seems like its taking forever on the bootanimation screen. How long does it usually take to boot up after flashing this kernel? Its probably been about 5 mins so far.

djthebogan said:
im installing this on simonsCM7 rom, it seems like its taking forever on the bootanimation screen. How long does it usually take to boot up after flashing this kernel? Its probably been about 5 mins so far.
Click to expand...
Click to collapse
Yeah that is totally my fault. I should have mentioned this was a Sense kernel and not a AOSP kernel. You will need to flash the CM7 kernel again.

djthebogan said:
im installing this on simonsCM7 rom, it seems like its taking forever on the bootanimation screen. How long does it usually take to boot up after flashing this kernel? Its probably been about 5 mins so far.
Click to expand...
Click to collapse
I tried the same :/ it won't work but at least now we know its for sense
Sent from my HTC_A510c using Tapatalk

Haha, no worries. I was thinking that might be the case. What sense roms has this been tested and working on?

djthebogan said:
Haha, no worries. I was thinking that might be the case. What sense roms has this been tested and working on?
Click to expand...
Click to collapse
Mine which hasn't been released yet but it should work on any GB 2.1 or 3.0 sense rom

cool, I'm testing it with insink's euro port beta right now. Definitely feel a speed improvement right away, will post results after testing. Thanks to all involved in marvelc development

thanks! works great and good to see work on the a510c
cheers

would be great support for cm7

effry said:
would be great support for cm7
Click to expand...
Click to collapse
I agree, I was thinking the same thing
Sent from my HTC Wildfire S using xda premium

Is this voodoo sound capable ??? My frnd with a wildfire s needs a kernel with the same... he using marvelc rom...

sbnaul said:
Is this voodoo sound capable ??? My frnd with a wildfire s needs a kernel with the same... he using marvelc rom...
Click to expand...
Click to collapse
No it isn't. I thought that was a Samsung thing
Sent from my HTC_A510c using xda premium

Yeah I had that when I had the vibrant.
Marvel Custom

[Q] [ROM] Black Notes Hybrid 2nd Gen Gets lagger and lagger as time passes

My black note seems gets lagger and lagger as time passes. It was pretty fast after rebooting but after a couple of times it becomes very very lag, when i check, the ram was 312/356. Anybody experiencing the same problem? or anyone could provide solution regarding this? your help is much appreciated

Run the engine flush..every two hours....in V6
Sent from my GT-I8150 using Tapatalk 2 Beta-5

I have the same problem i think its a bug...

andynroid said:
Run the engine flush..every two hours....in V6
Sent from my GT-I8150 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
where can I find the script?
thanks

yuxiann said:
My black note seems gets lagger and lagger as time passes. It was pretty fast after rebooting but after a couple of times it becomes very very lag, when i check, the ram was 312/356. Anybody experiencing the same problem? or anyone could provide solution regarding this? your help is much appreciated
Click to expand...
Click to collapse
It is smooth and stable for me. I suggest using Engine Flush and ssclean in V6 script.

yewsiong said:
It is smooth and stable for me. I suggest using Engine Flush and ssclean in V6 script.
Click to expand...
Click to collapse
1. What is engine flush for?
2. Do we need to do the engine flush & Superclean every certain time of interval?

SyzwnFrzRdz said:
1. What is engine flush for?
2. Do we need to do the engine flush & Superclean every certain time of interval?
Click to expand...
Click to collapse
Engine flush every 2 hours, superclean once a day should be enough.. read that afew times but dont know

snwman said:
Engine flush every 2 hours, superclean once a day should be enough.. read that afew times but dont know
Click to expand...
Click to collapse
Every 2 hours? WOW!
For how long have u use this ROM?
Using Cow's kernel right?
Experience any lag?

SyzwnFrzRdz said:
Every 2 hours? WOW!
For how long have u use this ROM?
Using Cow's kernel right?
Experience any lag?
Click to expand...
Click to collapse
For me, I have been using it since it was released. It is still lag if u play temple run after a long time of using w/o restart. We still need a better GPU management.
Yup. it is using cow's kernel.

yewsiong said:
For me, I have been using it since it was released. It is still lag if u play temple run after a long time of using w/o restart. We still need a better GPU management.
Yup. it is using cow's kernel.
Click to expand...
Click to collapse
Loads of people complaint that Cow's kernel is lag, even with V6 enabled but Cow's Slim Shady's kernel suffers lag-free.
Do you know EXACTLY why the reason is so?

SyzwnFrzRdz said:
Every 2 hours? WOW!
For how long have u use this ROM?
Using Cow's kernel right?
Experience any lag?
Click to expand...
Click to collapse
Used the rom for about 2days gone back to cows geth rom.(bionic 2)
But might move to to gingerice2.1 as it was using cows old kernal and was one of the best roms i used uintill cows bionic 2

try to use kezra rom man... its awesome!

SyzwnFrzRdz said:
Loads of people complaint that Cow's kernel is lag, even with V6 enabled but Cow's Slim Shady's kernel suffers lag-free.
Do you know EXACTLY why the reason is so?
Click to expand...
Click to collapse
CWG's Slim n V4 ROM uses two diff kernel from arco68 GitHub n is not that aggressive designed for none OC n OC respectively.
I have declared that if you want stable no FC go for these.
If you want OC for V4 running at 1.6GHz 24x7....I certify it is stable but the one thing lack is that Neo Instructions integrated in Bionic V2 which drives the quality of the graphics display but the kernel made by CWG is too aggressive of which some users may face BS etc.
Sent from my GT-I8150 using xda premium

andynroid said:
CWG's Slim n V4 ROM uses two diff kernel from arco68 GitHub n is not that aggressive designed for none OC n OC respectively.
I have declared that if you want stable no FC go for these.
If you want OC for V4 running at 1.6GHz 24x7....I certify it is stable but the one thing lack is that Neo Instructions integrated in Bionic V2 which drives the quality of the graphics display but the kernel made by CWG is too aggressive of which some users may face BS etc.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
BTW, what is BS?
Even in Hybrid 2, many experience lag. Is it because of the kernel or V6 script which has high LMK? I just wanna ensure MOST PEOPLE what the main problem would be.
One more thing, are u using Hybrid 2?
Because i wanna ask you how can i re-supercharge it?
The V6 that Rio put is integrated with init.d as well as build.prop, that's why i do not know how to re-supercharge in this case.

lag?
I been using the Blacknote 2nd Gen since it release, and it is 1st time I flash a custom rom.
its v6 default set to Super UL (125mb ram) which really smooth, but too high so me, so I re-supercharge it into multitasking which is 75mb free ram since I flashed and restore app+data from TB. Everything went smooth.
even 3-4days ram always maintain at 65-80mb ram. quite ok for me.
I also hear in FB galaxy W forum many face lag in blacknote 2nd but not me.
maybe I re-supercharge it? hrm ...
and in the FB galaxy W forum group got developer makes some tweak using latest stock kernel and many use it and commented bring better improvement and stability.
you can go check it out. join the group.
https://www.facebook.com/
groups/galaxyw/
* sorry for any bad english grammar.

andrew_wang916 said:
lag?
I been using the Blacknote 2nd Gen since it release, and it is 1st time I flash a custom rom.
its v6 default set to Super UL (125mb ram) which really smooth, but too high so me, so I re-supercharge it into multitasking which is 75mb free ram since I flashed and restore app+data from TB. Everything went smooth.
even 3-4days ram always maintain at 65-80mb ram. quite ok for me.
I also hear in FB galaxy W forum many face lag in blacknote 2nd but not me.
maybe I re-supercharge it? hrm ...
and in the FB galaxy W forum group got developer makes some tweak using latest stock kernel and many use it and commented bring better improvement and stability.
you can go check it out. join the group.
https://www.facebook.com/
groups/galaxyw/
* sorry for any bad english grammar.
Click to expand...
Click to collapse
Bro,
How did u re-supercharge it??
Because the V6 in Hybrid is integrated with init.d but not just with build.prop alone.
In the Samsung W group, what did the "developer" did when tweaking the latest stock kernel?
Because in my view, the "developer" DID NOT tweak any kernel but he just replace Hybrid's kernel with stock kernel. That's it.

SyzwnFrzRdz said:
Loads of people complaint that Cow's kernel is lag, even with V6 enabled but Cow's Slim Shady's kernel suffers lag-free.
Do you know EXACTLY why the reason is so?
Click to expand...
Click to collapse
May I know which rom is using cow's slim shady kernel? I notice i can't use cow's latest kernel, a lot of fc and wifi error.

-storm- said:
May I know which rom is using cow's slim shady kernel? I notice i can't use cow's latest kernel, a lot of fc and wifi error.
Click to expand...
Click to collapse
There's ONLY one, Slim V2 ROM. You can refer the FB group above.
Seeeee, you TOO experience such things BUT some people like me DIDN'T. LOLzz.

snwman said:
Engine flush every 2 hours, superclean once a day should be enough.. read that afew times but dont know
Click to expand...
Click to collapse
How do you make flush running every 2 hours?

mambro said:
How do you make flush running every 2 hours?
Click to expand...
Click to collapse
With script manager from the market

Disadvantages of using custom kernel

What are they? I really want to use it because since my arc s is updated to ICS, it became turtle, but using custom kernel, I really afraid it cause my phone becomes a rock in the future!! So please ! Thank you
Sent from my LT18i using xda premium

not an expert on custom kernels, but you can most definitely flash a custom rom to increase your phone's performance

jman2131 said:
not an expert on custom kernels, but you can most definitely flash a custom rom to increase your phone's performance
Click to expand...
Click to collapse
yes, i really want to use custom rom, but there are bugs! so i prefer use stock rom with some mod

If I may, I recommend Jelly sandwhich. It's essentially almost bug-free according to posts on the thread - as for me however, I haven't encountered any bugs on version 7.3
Wouldn't hurt to try

What abt battery?
Sent from my LT18i using xda premium

kimkeoangkea said:
What are they? I really want to use it because since my arc s is updated to ICS, it became turtle, but using custom kernel, I really afraid it cause my phone becomes a rock in the future!! So please ! Thank you
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
Compared to stock kernel you might experience higher performance but at a cost. It might include bugs and make the phone unstable. There could be memory leaks which mean you would have to reboot the phone very often to keep it functional, it will begin to lag after a few days of use.
The memory tunings can increase user interface performance but also often at cost of poor multitasking and higher battery drain as Android continuously in the background swaps apps in and out of memory. A general higher battery drain is also normal for many of the kernels or at least used to be half a year ago.
Stick to stock kernel unless you really need the extra performance or try to find a custom kernel with only very small modifications. Overclock and undervolt are two "safe" modifications that does not change the behavior of the kernel, that is as long as it is not overdone. The success rate of undervolt and over clock depend allot on your handset and can differ allot. Some can safely overclock to 1.8Ghz, others can hardly keep it at 1.4Ghz for the old Xperia Arc.
If you have root access, you can install "MinFreeManager" app to manually tune memory parameters, these are reset at reboot of your phone and it is safe to try different values. If you find stock ICS slow, you can increase the memory limits for Hidden, Content and Empty apps to improve user interface experience. It will be at a cost worse multitasking, and could cause higher battery drain if you have too many widgets and services installed to fit in the memory after updating the memory settings.

Thank you so.much for your information
Sent from my LT18i using xda premium

jman2131 said:
not an expert on custom kernels, but you can most definitely flash a custom rom to increase your phone's performance
Click to expand...
Click to collapse
+1
---------- Post added at 04:24 PM ---------- Previous post was at 04:22 PM ----------
jman2131 said:
If I may, I recommend Jelly sandwhich. It's essentially almost bug-free according to posts on the thread - as for me however, I haven't encountered any bugs on version 7.3
Wouldn't hurt to try
Click to expand...
Click to collapse
yep!

[REQUEST] Gingerbread Kernel

Hi everybody. I cannot understand why this community finally ended developing gb kernels. Yes I know, we like to have latest features, we like to see the number 4 in our build description, but let's be realistic... There's nothing compared to gb in our Arc / s... I have been thinking differently until a month, but now it is impossible to think in another way...
- I go to bed after 18h having 50% of battery...
- With some tweaks I have the same smoothness or MORE than in JB.
- Extreme good RAM usage. Amazing for games
- Gb is the most stable firmware for our device. No reboots, NEVER. a very few fc..
And now think... is there any fw that IN STOCK has all this features? The answer is no...
We have only two kerneles for GB
- DoomKernel v22
- Advanced Stock Kernel (also by DoomLord) v1
I request developers to continue working in kernel development in GB. People still use gb, and u can notice that by entring in the dev section. There still are gb roms and people use them!
Please, don't give up, continue it and we will get the best results in our phone.
Thanks

When can we expect your first kernel release?
Sent from Myushi

XperienceD said:
When can we expect your first kernel release?
Sent from Myushi
Click to expand...
Click to collapse
No, I am not a kernel developer. I don't know how to. I don't have too much free time since I am finishing law career. This is a REQUEST. I am requesting any developer to work on gb kernel.

luiseteyo said:
No, I am not a kernel developer. I don't know how to. I don't have too much free time since I am finishing law career. This is a REQUEST. I am requesting any developer to work on gb kernel.
Click to expand...
Click to collapse
He's trying to say that if you want it, you make it.
Sent from my LT15a using xda app-developers app

DdcCabuslay said:
He's trying to say that if you want it, you make it.
Sent from my LT15a using xda app-developers app
Click to expand...
Click to collapse
Yes, I know what he's trying to say. I am answering that I CANNOT do it because I don't have much free time and I don't have kernel knowledge. I was requesting (as a lot of times has been done) in this forum anybody to continue gb kernel development.

Sure, I'll start whenever I get a new PC and some free time.
Most likely, not in the next few months. But who knows.

Someguyfromhell said:
Sure, I'll start whenever I get a new PC and some free time.
Most likely, not in the next few months. But who knows.
Click to expand...
Click to collapse
Thank you! That's good tho hear that! It is a very sensible decision!

Sv: [REQUEST] Gingerbread Kernel
Don't forget Blend kernel that is made for being used together with stock based 2.3.x ROMs
Sent from my GT-I9300 using xda app-developers app

AW: [REQUEST] Gingerbread Kernel
Why?
Isn't doomkernel enough
GB is outdated from 2010 ^^

jader13254 said:
Why?
Isn't doomkernel enough
GB is outdated from 2010 ^^
Click to expand...
Click to collapse
No, I would request a more powersaving kernel. It is battery-stable enough but I would suggest more and more development. Always more if it is possible.

[KERNEL][GT-N8013]Cubed Kernel 1.0.3[02.15.03]OC to 1800, Patching

Okay folks, no fancy graphics or information here. Searching this site will tell you any of the generic information you may be interested in. I am not going to clutter up things any more than I normally do. Which is already enough.
I need to make something very clear here. I'm sure it's just me, but I feel like I need to say it out loud, rather than just leaving it in my source. At least 90% of what I give you is other peoples original work, modified by me to run on whatever device I have. I don't do it to look smart, or be important, I do it 9 times out of 10 because there isn't something already out there. The vast majority of the options I give you are from amazing coders like show-p1948 and faux123. There are random snippets from others too. I just wanted to make that clear. If you ever wanna know exactly who did something I put into a kernel, go look at the source. If I cannot get the original commit, with them as author, they are listed in the comment. If nobody is there but me, I actually did it.
So, here you go:
GT-N8013 Cubed Kernel 1.0.3​
Installation:
Flash the zip in Clockwork. Pretty easy right?
Change Log:
02.14.03: Initial release, version 1.0.1
Overclock to 1.6GHz
Voltage control
SIO Scheduler
ROW Scheduler
LulzactiveQ Governor
Boeffla Sound support - Control App HERE
YankasusQ Governor
Zen Scheduler
CIFS/NTFS support
Turned on stock governors
Patched up to Linux 3.0.63
02.15.03: Increased version to 1.0.3
Increase OC to 1.8
Patch to Linux 3.0.64
Few fixes
Downloads:
GT-N8013 Cubed Kernel 1.0.3
MD5: 00c9c79e12ee7cbffe2d11ad22d13196
GT-N8013 Cubed Kernel 1.0.1
MD5: 375dd644351ba6ab81c105c81a84a1b0
Enjoy!
D
.
My Git

I've only had the tablet for a few hours, so give me time to see what all can be done.
I DO NOT KNOW IF THIS WILL WORK ON ANY OTHER MODEL!!!!!
D
.

Re: [KERNEL][GT-N8013]Cubed Kernel 1.0.1[02.14.03]Initial Build
Heck yeah custom kernel for 8013 awesome. Thanks man will be testing this as soon as I can.
Also just to clarify, is this for tw or aosp
Sent from my SCH-I535 using Tapatalk 2

pimpmaneaton said:
Heck yeah custom kernel for 8013 awesome. Thanks man will be testing this as soon as I can.
Also just to clarify, is this for tw or aosp
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
TW, I just got the thing! :laugh:
D
.

Words can not even express how happy I am right now.. just..thank you:angel:

Re: [KERNEL][GT-N8013]Cubed Kernel 1.0.1[02.14.03]Initial Build
Well welcome dsb, glad to have another kernel dev.
Sent from my SCH-I535 using Tapatalk 2

Feel free to let me know how it does. I kinda built it last night before I had the tab. It seems good to me, but I'm not as hard on things as others can be.
D
.

THANKS SO MUCH man!!!! Super excited to see a custom kernel on the Note 10.1!!!!!!!

Now lets hope I do it right! :cyclops:
D
.

Works on gt n8000 but without 3g network does not detect sim card. it would be possible to make the gt n8000 with 3g.
Thank you very much.

Re: [KERNEL][GT-N8013]Cubed Kernel 1.0.1[02.14.03]Initial Build
Well played, sir. I have a sexy smooth tablet that is actually stable now. I did have to do a full wipe due to it freezing and starting over, even after clearing cache/dalvik/fix permissions. It was totally worth it though, thank you for your hard work!
Sent from my GT-N8013 using XDA Premium HD app

Any fore N8000?? ;/

just flashed and stuck on black screen on startup......

Re: [KERNEL][GT-N8013]Cubed Kernel 1.0.1[02.14.03]Initial Build
Kernel working great so far will give more feedback at the end of the day thanks
Sent from my GT-N8013 using xda premium

Re: [KERNEL][GT-N8013]Cubed Kernel 1.0.1[02.14.03]Initial Build
So far kernel working great on my n8010. Shall update you if I have any issues.
Keep up the great work.
Sent from my GT-N8010 using Tapatalk HD

Works great on N8013, Thanks again man, really happy to have a custom kernel!!

Patched up to Linux 3.0.64, upped the OC to 1.8, and patched a few other things.
Mine does not run long at 1.8, does anybody's?
D
.

dsb9938 said:
Patched up to Linux 3.0.64, upped the OC to 1.8, and patched a few other things.
Mine does not run long at 1.8, does anybody's?
D
.
Click to expand...
Click to collapse
Thank you! Downloading now:laugh:

dsb9938 said:
Patched up to Linux 3.0.64, upped the OC to 1.8, and patched a few other things.
Mine does not run long at 1.8, does anybody's?
D
.
Click to expand...
Click to collapse
Nope my it just reboots after a while at 1.8
Sent from my GT-N8013 using xda premium

Dsmforlife92 said:
Nope my it just reboots after a while at 1.8
Sent from my GT-N8013 using xda premium
Click to expand...
Click to collapse
I'm sure somebody will be able to use it.
I've been very stable at 1.7 so far.
D
.