SOMEONE PLEASE HELP! I RECENTLY FLASHED THE 2012-09-08 07:33:31 NIGHTLY AND THEN GOT BOOT LOOPED! I WAS ON CWM 6.0.1.1 AND NOW IM ON 6.0.1.3. I TRIED:
1. Factory Reset
2. Re Flashing CM10
BUT NOTHING
PLEASE HELP ME SOON!
THANK YOU
maybe you need to odin and start over.
Try re-downloading the ROM. Wipe system, data, and cache. Try to flash again. It's worth a try before using Odin to reset.
Sent from my SPH-D700 using xda premium
propjockey said:
Try re-downloading the ROM. Wipe system, data, and cache. Try to flash again. It's worth a try before using Odin to reset.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
How do I wipe system? there is wipe data/factory reset,wipe cache, and wipe dalvik cache
One thing i forgot to mention.
When i first flashed CM9 I was not on CWM 6.0.1.1 ( I was on a previous version).
Sometime after, when I flashed the Stable CM9, or something earlier, It got changed to 6.0.1.1. What I think might be the problem is that I need to go back to the previous versions of CWM and then flash the CM10 rom( not the ERA one)
samsungepicgeek said:
How do I wipe system? there is wipe data/factory reset,wipe cache, and wipe dalvik cache
Click to expand...
Click to collapse
Under mounts and storage, pick format system/
xboxfanj said:
Under mounts and storage, pick format system/
Click to expand...
Click to collapse
Thank You SO MUCH, It works now!
np.
Related
flashing through rom manager. wiped dalvilk, data and cache. when its finished installing, it just hangs at the white htc incredible splash screen. CWM 3.0.8
I never install thru rm anymore. Boot into recovery and try that. Wipe everything 3 times
Sent from my ADR6300 using XDA App
ive forgotten how to manually wipe and flash. its been so long. can anyone help me?
Boot into recovery
Wipe data/factory reset
Wipe cache
Advanced>wipe dalvik cache
Install zip from SD>choose zip from sd
Sent from my ADR6300 using XDA App
k_nivesout said:
Boot into recovery
Wipe data/factory reset
Wipe cache
Advanced>wipe dalvik cache
Install zip from SD>choose zip from sd
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Thanks.
I propose a toast to the 21st century.
Make sure to flash the GAPPS directly after flashing the ROM while in recovery....I've read that if you let the ROM boot up before doing this it can cause some problems later on
nate2830 said:
Make sure to flash the GAPPS directly after flashing the ROM while in recovery....I've read that if you let the ROM boot up before doing this it can cause some problems later on
Click to expand...
Click to collapse
I can attest to that. You must flash GAPPS before booting the ROM for the first time.
Hello all, I started off using the toolkit. I used the ALLINONE. Everything went perfect I rebooted and had root and all. Then went into Clockwork and that was there to. Everything was perfect. Choose a rom and now everytime I try to install it, it never opens. It just keeps boot cycle or does it take more then 10 mins to boot?
Please help
The backup I made now doesnt support the MD5? and I cant get any stock roms to flash in odin.
Please help
Thanks
Did you do a factory reset and wipe cache and dalvik cache prior to flashing the ROM? Sounds like you skipped that step. Do as I said above then flash rom, you should be golden.
Sent from my SGH-I747 using Tapatalk 2
corythug said:
Did you do a factory reset and wipe cache and dalvik cache prior to flashing the ROM? Sounds like you skipped that step. Do as I said above then flash rom, you should be golden.
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Pretty sure i did this but ill try again one sec!
just wipe data factory reset, and wipe dalvik cache and regular cache. it should work after that.
Hi All,
So I've just unlocked my bootloader, flashed .79 firmware and flashed DooMKernel v14
My question is what do i need to do before installing the ROM from my SD card
Format the phone "Factory Reset"?
Wipe dalvik cache?
Wipe cache partition?
Also if I'm wanting to try another ROM do I need to do any of the above before installing a different one?
Thanks
Re: Before installing ROM
Fraymond said:
Hi All,
So I've just unlocked my bootloader, flashed .79 firmware and flashed DooMKernel v14
My question is what do i need to do before installing the ROM from my SD card
Format the phone "Factory Reset"?
Wipe dalvik cache?
Wipe cache partition?
Also if I'm wanting to try another ROM do I need to do any of the above before installing a different one?
Thanks
Click to expand...
Click to collapse
Yes wipe data(factory reset), then wipe dalvik cache and cache. You need to do this when switching ROMs. If its an update of same ROM and OP say there is no need for wipes then dont, otherwise always wipe.
Sent from my GT-I9300 On Official JB
Re: Before installing ROM
Dalvik is contained in /data if I remember. I thought it was system, data, and cache that you had to wipe.
Sent from my SCH-I535 using Tapatalk 2
Default Re: Before installing ROM
brainard52 said:
Dalvik is contained in /data if I remember. I thought it was system, data, and cache that you had to wipe.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Yep I agree
I do the following:
(1) Wipe cache/data/advanced dalvik cache
(2) Mounts&Storage format cache/data/system
(3) Install rom.
Maybe you do not need to do all that but I do and don't get any bootloops
So i just got that custom rom (thread title) and when i boot on my lil Galaxy Gio, it stays where it says ANDROID. Help needed so i could use my phone. ROM located at: http://forum.xda-developers.com/showthread.php?t=2396690
PS. Forgot to
2. Wipe Data
3. Wipe Cache Partitions
4. Wipe Dalvik Cache
Christian101 said:
So i just got that custom rom (thread title) and when i boot on my lil Galaxy Gio, it stays where it says ANDROID. Help needed so i could use my phone. ROM located at: http://forum.xda-developers.com/showthread.php?t=2396690
PS. Forgot to
2. Wipe Data
3. Wipe Cache Partitions
4. Wipe Dalvik Cache
Click to expand...
Click to collapse
Wipe data/factory reset, wype cache partitions, wipe dalvik cache, install rom. It should work in this way
Sent from my GT-S5660 using xda app-developers app
jkoetsier said:
Wipe data/factory reset, wype cache partitions, wipe dalvik cache, install rom. It should work in this way
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Dont have ''wipe dalvik cache'' , trying to find reason why, maybe because i dont have cwm recovery?
Christian101 said:
Dont have ''wipe dalvik cache'' , trying to find reason why, maybe because i dont have cwm recovery?
Click to expand...
Click to collapse
It is under "advanced" and click on "Wipe Dalvik Cache" then "Yes - Wipe Dalvik Cache"
when you wipe the system or do a full wipe does that remove the TWRP recovery mode. I wiped to go to a new ROM before but I could not get back into TWRP recovery menu and had to re-install it all over again. IS this the case every time you wipe the system?
No, wiping system only wipe the ROM. I did run into the same problem once with an older version of TWRP. Haven't had any problems with TWRP 2.6.3.1 yet(knocking on wood)
josephh71 said:
when you wipe the system or do a full wipe does that remove the TWRP recovery mode. I wiped to go to a new ROM before but I could not get back into TWRP recovery menu and had to re-install it all over again. IS this the case every time you wipe the system?
Click to expand...
Click to collapse
Short answer, no. It is highly abnormal for the recovery image to be wiped/corrupted from a reset/wipe. But then again, twrp has seen its fairshares of hiccups. Maybe it was just a fluke, luck of the draw.
Sent from my SGH-M919 using XDA Premium 4 mobile app
thanks for the help
Thanks I thought I was doing something wrong. I had to start all over and since then I have never done a complete wipe only Davlik and Cache
josephh71 said:
Thanks I thought I was doing something wrong. I had to start all over and since then I have never done a complete wipe only Davlik and Cache
Click to expand...
Click to collapse
Whenever I flash roms or restore nandroid backups, I always do a factory/data reset, wipe cache, and wipe dalvik cache. Then I proceed to flash. Never had any problems. Sorry that you had to redo everything :-{
Sent from my SGH-M919 using XDA Premium 4 mobile app