Hey everyone!
One of the cases that I'm considering for my GS3 is the Otter Box Defender. I know that it has a built in screen protector, but I was wondering if anyone could tell me what the quality of the built in screen protector is like? ie, clear, glossy, matte, scratch and fingerprint resistant, absolute crap, etc...? Does anyone have the Defender and use a different screen protector with it? The more information, the better. Thanks!
The feel of it as they have always been more like a clear glossier plastic. Its not Matte or smudge proof thats for sure. Is it the best screen protector out? Most certainly not, but its not really meant to be removed but doesnt mean you can rip it off cause i have done so with other phones I had. Mostly because I have always been a big supporter and user of the ZAGG Protectors which in my opinion are the best in terms of quality and build. But you really dont want to have a screen protector on and then use the otterbox with the added screen protector. Two to me is too many and can cause some interference with touch controls. I know there is prolly a million people on here that will say otherwise and they have done it without issues just my honest opinion when i had one on phone then used otterbox case with attached protector as well I hated it. The touch for me was way off. But if you dont end up liking it just get you a good screen protector and then when you buy the defender just pop off the one that comes with it. No worries.
I just got the Defender last week for GS3 and Love it! Its an amazing case and love the holster. I always end up buying one of these cases for my phones cause they just LAST.
Cheers!:highfive:
Case is good but the screen protector makes everything pixilated. Really hard to get past for me. So I tore out the screen protector and had a zagg hd put on. Works out well.
Sent from my SCH-I535 using xda premium
It, sux it makes the screen look grainy, i sold it and got the commuter instead, i just bought the defender because the screen protector, and since it sux i rather have the bit slimmer commuter.
I love the commuter btw.
I took the screen protector out also. Don't let that be what steers you away from the defender. The case is awesome, the product support is awesome. I keep thinking about getting a stick on protector but haven't yet. I use the holster so the screen is protected by that most of the time. I have scratched and scuffed the outer rubber of the case however. I emailed otter support asking if I could buy replacement outers in the future and explained that I scratched the case... No defect of the product. They asked for pictures and the next thing I know I have an invoice in my email... They are sending me a whole new replacement! You can't beat that service.
Got the Black Defender and the screen protector is utter crap. Invested in a ZAGG HD and never looked back.
The quality of the built-in screen on the Defender made everything look so blurry and pixelated.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Yea, I agree with the replies, it does make the screen look ugly, but it's good protection for your phone, I work construction, so I didn't take it off
Sent from my SGH-T999 using xda app-developers app
g2uzer said:
Yea, I agree with the replies, it does make the screen look ugly, but it's good protection for your phone, I work construction, so I didn't take it off
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Disagree - it's not good protection, in fact is bad for it.
Buddy of mine had a defender for his phone before. Over time dust, grit and what have you worked it's way in between the otter screen guard and the screen itself. Then everytime you touch it has the same effect as rubbing sandpaper on your screen. His got murdered from it.
You need a screen protector that adheres to the screen itself to prevent fine grains of dust, dirt, sand or what have you from turning it into a piece of sandpaper every time you touch it.
After seeing the destruction wrought on his screen, was in the defender from day one, and now owning a defender myself, I fully understand why the most common mod to the case is to take an Xacto knife and cut the screen guard out.
Do that and use a quality shield on the screen, you will be very happy you did.
^ I usually take my case off every other week to clean it, and I was surprised to see that barly any dust got in at all, the only places I saw was around the top where the little hole is at and around the camera/flash /speaker área , maybe his case was defective? Over all I'm impressed to see how clean my phone is every time I take off the case.
Sent from my SGH-T999 using xda app-developers app
Related
I've been considering getting a screen protector for a while now. The problem I have is my hands sweat very badly (gross I know) and then the touch screen on my phone goes crazy from the water on the screen. I have never had this problem with any phone I've had before now. I think it is because the Atrix touch screen is more sensitive than any other phone I've had. I was wondering if a screen protector would fix this problem and what some good brands were to try. Thanks
Sent from my MB860 using XDA App
You should always have a screen protector on any smart device you care about. One grain of sand in your pocket can ruin your screen (and your day). That said....
A screen protector will likely NOT fix your problem, as water (sweat) registers as a capacative touch. For a screen protector to "fix" the registration of sweat, it would have to also "fix" the registration of a desired capacitive touch (finger, stylus, or otherwise).
The only manner in which a screen protector could help is if you could find a very hydrophobic one (the repells and beads water), though you would still need to soak up that water with your shirt or a handkerchief or something. I'm not sure they even sell these. Google is your friend, here. Use keywords hydrophobic and/or water-repellent. Good luck, my friend, and let us know if you find anything interesting!
-omni
I tried few of a kind and decided to go with Otterbox Defender case which has a transparent front panel.
Refurbished case is about $20-25 and as good as a new one.
No need for screen protector. No mess with applying one...
What if I put on an average screen protector and then sprayed it with some form of water repellent?
Sent from my MB860 using XDA App
jadwv2210 said:
What if I put on an average screen protector and then sprayed it with some form of water repellent?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Water repellent spray wouldn't work because the screen protectors are vinyl or polyurethane and are not absorbent. Those hydrophobic sprays only work with an absorbent material like cloth or real leather.
Use car wax, something like the rain-x.
jamesc760 said:
Use car wax, something like the rain-x.
Click to expand...
Click to collapse
That's what I was talking about. It works on car windshields so it should work on a screen protector right?
Sent from my MB860 using XDA App
jadwv2210 said:
That's what I was talking about. It works on car windshields so it should work on a screen protector right?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
only one way to find out...!
I have to disagree with the statement that you have to have a screen protector, we have gorilla glass! I have never had a protector and my screen looks great! As for this situation, a protector that has a little rubberized feel might work well. I would read reviews on Amazon and buy the one that people complain the most about it sticking!
Sent from my MB860 using XDA App
FWIW, my wife has been w/o a screen protector since April and I've been with / without one on and off since June.
Still not a single scratch on either phone, however, without one the screen is too smooth, so I'm thinking of going back installing one.
Hope this helps...
I went without a screen protector for a few months. I took the phone outside and noticed TONS of very fine scratches. You could only see them in direct sunlight, but it bothered me enough that I got a screen protector shortly thereafter.
I was thinking to buy a Vikuiti ADQC27. Has anyone tried it?
Thanks
I have to second the rec for the Otterbox Defender case. Having the screen protector built in is pretty awesome and in my experience, it has withstood all kind of liquidy stuff on it and plenty of goopy stuff as well. Like those technical terms?
It hasn't hampered my touch screen through various roms with various sensitivities and my glowing review hasn't even hit all the protection benefits it gives.
Best part? I got mine for about $10 'used' on ebay and while the silicone part was a little loose, a quick email to Otterbox got me a free placement in the mail without any hassle.
I haven't used one myself, but if they make one for the Atrix and if it's what you are really looking for, Zagg stuff has made some of my friends really happy.
You should look into a Matte one where is almost smudge free
altho it looks slightly foggy and scratch easily, but its worth it
make sure u get like a few togehter on ebay so you have backup ones
I have to second the rec for the Otterbox Defender case. Having the screen protector built in is pretty awesome and in my experience, it has withstood all kind of liquidy stuff on it and plenty of goopy stuff as well. Like those technical terms?
It hasn't hampered my touch screen through various roms with various sensitivities and my glowing review hasn't even hit all the protection benefits it gives.
Best part? I got mine for about $10 'used' on ebay and while the silicone part was a little loose, a quick email to Otterbox got me a free placement in the mail without any hassle.
I haven't used one myself, but if they make one for the Atrix and if it's what you are really looking for, Zagg stuff has made some of my friends really happy.
Click to expand...
Click to collapse
I was looking for something less "bulky"
You should look into a Matte one where is almost smudge free
altho it looks slightly foggy and scratch easily, but its worth it
make sure u get like a few togehter on ebay so you have backup ones
Click to expand...
Click to collapse
Can you suggest any brand? Something like the GreatShield Ultra Anti-Glare (Matte)?
I have one on mine, steinheil (SGP), while the protector gets scratched its better than the screen getting scratched.
Can't really tell the SGP ultra crystal protector is on the screen either, other than the few scratches that are on the protector now. Comes with 2 in a package if you get them.
They have an oleophobic one that is suppose to be oil resistant, maybe that one might be ideal? The ultra fine is their matted one.
If you look at the product on their webpage the 'Select a Color' changes the type of protector they have (took me a min to find the different versions they had when I looked again).
Last while the corning glass is tough, with a vickers hardness of 622kgf/mm2 in the unstrengthened and 701 in the strengthened stuff is pretty impressive.
Spec sheet for the glass can be found from corning's site using a google search, made me curious to check it.
While pretty hard something as simple and common as sand can scratch it which has a vickers hardness of about 1000....
Keys, lighters and the like are unlikely to scratch it though as unless its hardened tool steel its hardness will likely be below 650, an edge on a tungsten ring could probably do the trick though.
Anyhow I keep one on my phone, though maybe not really necessary I'd rather have a scratched screen protector than see the glass get scratched.
I'd rather have a scratched screen protector than see the glass get scratched.
Click to expand...
Click to collapse
I am of the same mind.
Thanks for the opinion.
beaver6d9 said:
I haven't used one myself, but if they make one for the Atrix and if it's what you are really looking for, Zagg stuff has made some of my friends really happy.
Click to expand...
Click to collapse
Zagg and Skinomi are quite nice. I like the Skinomi on my tablet maybe even a bit better than the Zagg on the Atrix, but the difference is very minimal. I'd say the Skinomi may slide slightly better than the Zagg, but you're splitting hairs.
I agree with BeakHill. SGP is great except they scratch easier than Zagg. The Ultra crystal is so clear that they don't even have a cut out for the front camera. The Ultra fine is their matte model and it is good and smooth, the crystal is nicer IMO..
The problem with SGP is they spoil you to the other brands, and they are more expensive.
ive always put a total body skin on my phone in addition to a case
http://www.bestskinsever.com/motorola-atrix-4g-skin
I got a free on with my tpu case. I'm wondering if it is nice enough to use.
For reference I removed the zagg from my moment because it made the screen grainy.
I removed the zagg from my epic 4G for the same thing
I removed the sprint on from my galaxy s2 because it made the screen blurry. And the feel of the plastic sucked for swype.
Sent from my SPH-L710 using xda app-developers app
I just installed the Zagg HD on my phone. So far it seems nice. I just worry that it may peel easy.
i installed the one from diztronic and didnt really like the feeling for swype.
I'm using one. It does not seem to impact the quality of the screen as it's perfectly clear and shiny (no grain). Mine is a little too wide and it lifts a little bit on the sides (top and bottom are good). Feel is alright, but it does not feel as good as the glass. If anyone knows of a screen protector that has better feel but is as clear as the Diztronic, let me know. You have nothing to lose by trying it for yourself. If you do, let us know how I compares to the others you have used. Which Zagg did you try on your S3? The HD or non-HD?
I just got it in the mail mail today (I work 3rd shift so it came Monday, I ordered it at 1am last thursday Thursday.), I installed it it was perfectly clear. I now use SwiftKey so swyping is no longer an issue. The only screen protector fit perfectly. I did take it off because it had too many bubbles.
Not going to blame Diztronic for this.
I would recommend it for sure.
I never used a protector for the s3 I don't really plan to. I had no protector on my s2 for the entire year I had it. Did the s2 have gorilla glass.?
Sent from my SPH-L710 using xda app-developers app
I have it installed but don't like it. It covers the front camera and smudges super easy. Covering the front camera might be considered a feature but I'd rather it was uncovered along with the light sensors. It doesn't cover the edges if that is improtant to you. Overall, Yes it should protect your screen and is fine enough for free, but I've got a different model on order.
Not a fan of the Diztronic screen protector. Too many bubbles, rough surface to swipe over, and the cleaning cloth they give you actually sheds material if you try to use it.
I love my new Diztronic case but don't like the screen protector. Applied it and took it off in a matter or minutes. Even took some Scotch tape and tried to get the stuff on the screen off and it still had bubbles. Case is great though.
Sent from my SAMSUNG-SGH-I747 using xda premium
Hi,
Does anybody knows what is the bulk/size difference between the 2 cases?
same with trident aegis.
I bought my bro the commuter, but the store didnt have the defender to feel.
I think that the commuter is slick and nice, and hope the the defender is doing so as well.
Thanks!
BADtoBONE said:
Hi,
Does anybody knows what is the bulk/size difference between the 2 cases?
same with trident aegis.
I bought my bro the commuter, but the store didnt have the defender to feel.
I think that the commuter is slick and nice, and hope the the defender is doing so as well.
Thanks!
Click to expand...
Click to collapse
I have the defender case and I love it. It does add bulk to the phone. It actually makes the phone look huge, but I love it. It feels save and secure. I feel like if I were to drop my phone 5 feet down onto concrete, my phone would be fine. If you like the slick feel of the commuter, then I suggest you stay with that case. :good:
I have the commuter and I have to say that I love it and after dropping my phone from shoulder height which is prob around 5 ft high I can honestly say that this case does a great job protecting the phone.
A second thought is that there are cases like the commuter series that have a stand clip. Which is great if your going to use your phone as a media device. my sister just got the casemate pop which looks awesome.
Sent from my SCH-I535 using xda app-developers app
ergibson83 said:
I have the defender case and I love it. It does add bulk to the phone. It actually makes the phone look huge, but I love it. It feels save and secure. I feel like if I were to drop my phone 5 feet down onto concrete, my phone would be fine. If you like the slick feel of the commuter, then I suggest you stay with that case. :good:
Click to expand...
Click to collapse
I use a generic very bulky case right now.
I dont care about thickness, and i ment slickness - i like the feel of the material in the commuter.
anyway, what is the size difference between them?
The size difference is not much. I have both cases. I am no longer using the Commuter case because the back is hard plastic and very slippery. The button plastic is very hard. I use the Defender case now because the silicone cover give me a better gripe and buttons are easy to press.
Sent from my SGH-I747 using xda premium
Thanks, thats basically the answer i was looking for.
what is you opinion regarding the plastic screen protector compared to a sticker?
It's not bad, it will probably protect it better but isn't optically as good as a high end shield.
Sent from my SPH-L710 using Tapatalk 2
contradude said:
It's not bad, it will probably protect it better but isn't optically as good as a high end shield.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
such as?
zagg shields are the typical goto screen protector.... There are cheaper ones, but you typically get what you pay for.
Commuter: 5.61 in x 3.10 in x 0.56 in / 142.5 mm x 78.84 mm x 14.28 mm
Defender: 5.88 in x 3.47 in x 1.41 in / 148.84 mm x 88.14 mm x 35.81 mm
Hey badtobone. I'll give you my experiences with the cases i've bought and the zagg shield cover i purchased. At first i had a tpu case with the zagg shield and the corners started coming up where the tpu case would rub on it. Scratch that idea. Then i bought the casemate phantom. The screen protector for the case pops on the front of the phone and then you cram the phone inside the outer shell of the case. Snapped the screen protector part putting the phone in the case one day and to boot the case is huge compared to the defender series but it was on backorder of course and i couldn't wait. So scratch that idea. I've always been an otterbox fan so i was finally able to order the defender for it. Awesome to a point. The case is somewhat smaller than the phantom which is awesome and great protection but i just don't like the screen protector. I've always liked the commuter cases screen protector because it was crystal clear on my other galaxy s phones and you can appreciate the screen more. If otterbox still offers the seperate screen protector for the commuter i'll probably use that along with the defender for the ultimate case. Just my 2 cents. Hope i could help.
Sent from my GT-I9300 using Tapatalk 2
I've never had an otterbox before a few days ago, but went with the defender model.
For previous Androids i've gone with the trident cases, and like them. The ones i've had are not comparable to the defender version of the otterbox, but i'll say now that any non-slide phone in the future for me will take into consideration defender case availability as part of the purchase decision.
It just feels safe now, the device.
Some things that could be better - the trident cases I've used have covers for speaker/mic with a filter behind to keep the dust out. This is decidedly lacking on the otterbox.
The holster is awesome, though. It's like the final stage of usefulness/protection. It makes a hard plastic shield over the screen and is an extra structural reinforcement of the protection level to the device.
Already i've turned it around in the holster, screen out, and clipped it to my visor in my car. Improv GPS mount.
In the same way you can just put something in the clip for back support and have a desk/tabletop mount for the device anywhere. Sitting in a hotel room watching a movie off the nightstand is much easier with this case.
My first impression of the clip on the holster was to cut it off and make a smooth outer shell for pocket carry. I may very well buy another case to try this out. The clip being on the case has literally proven it's case not to be cut off by how immediately useful it's been.
Another drawback, my only other complaint, the built-in screen protector.
Here again is another reason to buy a second case. Beyond trying it out without the belt clip, is trying it out without the screen protector.
I've seen a lot of threads where people mention cutting the on-board screen protector out of the defender with an xacto knife or something. Owning one, I now see why. I sit here debating the ramifications of the overall case structure if I do cut it out, because I would very much like to.
The silicon shell should still hold the case together, as well as the clips underneath that hold the case together, but I do worry about separation of the front of the case to the sides without the screen protector to hold them together. Especially given the holster clip will encourage that separation through use.
When the phone came in at the verizon store, I made sure that the first thing done to the device was to put a screen protector on it. Few days later I got the otterbox. It's whole life after unboxing, it's had a screen protector adhered to it's face. That part is important, as the otterbox screen protector just sits on the face, not adhered to it. This, to me, is an unacceptable level of compromise in protection of the device.
Without being adhered, the screen is subject to dust and oils getting between the screen protector and the screen itself. Once that happens, you are looking at the overlaid 'protector' acting like a piece of sandpaper with the dirt under it every time you touch it.
All in all, I can't see myself using anything but a defender to protect the SGSIII - a few slight modifications to the case and I will be completely satisfied.
I never played with a commuter model, but here are some thoughts on the defender.
Blue6IX said:
Another drawback, my only other complaint, the built-in screen protector.
Here again is another reason to buy a second case. Beyond trying it out without the belt clip, is trying it out without the screen protector.
I've seen a lot of threads where people mention cutting the on-board screen protector out of the defender with an xacto knife or something. Owning one, I now see why. I sit here debating the ramifications of the overall case structure if I do cut it out, because I would very much like to.
When the phone came in at the verizon store, I made sure that the first thing done to the device was to put a screen protector on it. Few days later I got the otterbox. It's whole life after unboxing, it's had a screen protector adhered to it's face. That part is important, as the otterbox screen protector just sits on the face, not adhered to it. This, to me, is an unacceptable level of compromise in protection of the device.
Without being adhered, the screen is subject to dust and oils getting between the screen protector and the screen itself. Once that happens, you are looking at the overlaid 'protector' acting like a piece of sandpaper with the dirt under it every time you touch it.
Click to expand...
Click to collapse
You don't need an xacto knife to remove the built-in screen protector. The screen is adhered to the case by a strip of removable glue. Just push the screen protector in with a little force and it pops right off. You can then remove the glue around the edges by simply pulling the one long strip up around the edge.
The built-in screen protector does suck. It makes the screen very pixalated and dust does get trapped under the screen protector.
Try this out... Remove the built-in screen protector and buy a best skin ever wet protector. Apply that wet protector, let it dry completely, now place you defender case (with built-in protector removed) on the phone. This is the setup I have and it is absolutely perfect. I promise you'll love this setup. I'm extremely anal about my screen protector and case combinations for my phones and I've tried 5 different combinations before going with the BSE/defender combination. Trust me, it doesn't get better than this combination. My screen quality is perfect and my phone is secure and safe.
Sent from my SGH-T999 using xda app-developers app
Thanks to all the repliers!
so buying the case knowing that youre gonna take of the screen might be a good idea?
anl links or clips from people who did it?
anything in youtube?
BADtoBONE said:
Thanks to all the repliers!
so buying the case knowing that youre gonna take of the screen might be a good idea?
anl links or clips from people who did it?
anything in youtube?
Click to expand...
Click to collapse
You don't need any videos or anything. All you're gonna need to do is pop the screen protector off by pushing it away from the case. It's actually really simple and doesn't require much effort at all. U won't break the case doing it. Just know that once u remove the screen protector, you can't reapply it. So u may want to see what the screen clarity looks like before removing the built in screen protector. You may think the screen quality is ok with it.
Sent from my SGH-T999 using xda app-developers app
had a chance to check out both the other day.
imo there's no real comparison between the two..and the commuter is almost useless to choose over the defender
its harder to take the commuter on and off imo...
it doesn't feel as nice as the defender..and its slippery..
the buttons are hard to press.... no where near impossible or anything like anyone really says when they complain but it's definitely not convenient and its fairly annoying...I actually had the phone try to slip out of my hand a few times while squeezing the phone to press the buttons.
and....the defender for the SG3 isn't as big as you'd think it is (especially in comparison to the commuter)
best part....the silicone otterbox uses on there defender has always been my main complaint...but they've used some stiffer stuff, doesn't flop off at all (or really stretch like at all) and it doesn't feel like it will collect a ton of lint or snag too much coming out of a pocket. It's just the right amount of grip
Can anyone post pic of the 'improved' defender (without plastic screen)?
I am loving my commuter. Buttons are fine for me even the power being hard to press Is not a deal breaker. My main gripe is screen protectors seem to be an issue if they are full like the curved crystal. Lesson learned, I am going to try the one that came with the case today.
Sent from my SPH-L710
alexyaz said:
I have the commuter and I have to say that I love it and after dropping my phone from shoulder height which is prob around 5 ft high I can honestly say that this case does a great job protecting the phone.
Click to expand...
Click to collapse
Definitely. I was thinking of getting a thinner case, but I drop my phone often enough that Commuter is worth it. I have the green one and I imagine it can get quite dirty in the future.
Buttons are definitely hard to press, but I can get used to it I guess. Definitely worth it for the protection alone.
BADtoBONE said:
Can anyone post pic of the 'improved' defender (without plastic screen)?
Click to expand...
Click to collapse
It looks exactly like the defender.. Just without the plastic screen protector. Think of it as a window with no glass. The window will still look the same, it just has no glass. U will be using a wet screen protector instead of the builtin screen protector.
Sent from my SGH-T999 using xda app-developers app
I finally broke down and got an S3 today and also picked up a pack of the ridiculously expensive stick-on screen protectors that Verizon sells as I didn't want to take any chances in between buying the phone and getting some cheap ones. Anyway, the screen looks very grainy with the protector, especially when displaying lighter images. I really don't mind that much but when I'm taking pictures it really bugs me. I was wondering if anyone knows of a screen protector for the S3 that is durable but doesn't make the screen look all grainy.
Thanks!
The screen protector that comes with the otter box case is perfect. You really don't even notice it at all. It's the best screen protector that I have personally used
Sent from my SPH-L710 using xda premium
Ah damn I already bought a case.
Raillery said:
Ah damn I already bought a case.
Click to expand...
Click to collapse
I'm not a big fan of the otterbox defender screen protector. As a matter of fact I am not even using it. I think there are a lot of protectors that don't look grainy, I wish I could find one that didn't show fingerprints.
Zagg HD all the way
Sent from my SPH-L710 using xda premium
mnhertz26 said:
The screen protector that comes with the otter box case is perfect. You really don't even notice it at all. It's the best screen protector that I have personally used
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
right on, couldnt agree more. i was gunna say the same thing.
Just applied this, went on easy, no bubbles, crystal clear, dry application
Sent from my SPH-L710 using xda app-developers app
Verizon replaced them with some clear ones. I guess I had gotten the anti glare ones. Having trouble getting an air bubble out though.
Sent from my SCH-I535 using xda app-developers app
I'm not a fan of cases in general, so I bought an Armor Shield full-body protector - essentially it's like screen protector film, but they send precut pieces to protect all of the phone rather than just the screen.
I'm really really impressed with the whole package - the body parts are cool in that they really just give a great grip (the stock phone is really slippery), but the screen protector is really impressive in all the ways screen protectors have disappointed me in the past.
This one doesn't feel rubbery (interestingly, since the body parts add grip), in fact my finger glides on it better than the glass surface. That was surprising.
And, this one doesn't collect fingerprint grease.
I'm betting armor shield sells the screen protectors solo... and probably affordable, I think the whole body package with the screen protector was only $15.
And it's clear, I think for your original question, just avoid "matte finish" screen protectors. Those are the ones with the hazy/grainy finish.
I recently won a bid on ebay for a note II so naturally i want to protect it the best i can. I am the type of person who can be a bit hard on phones. I drop them, sometimes things can fall on them and so on so i need good protection. I pretty much have an otterbox on everything i own so i figured i would order one for my note II. Im wondering if i made a mistake because the reviews im reading arent very good. Can anyone comment about the case on the note II? Most things im reading is the outside stretches quickly and the plastic screen protector really diminishes the quality of the screen. If this is a bad case, can someone recommend the best solution for protecting the phone AND the screen, even if its two seperate parts.
I have the otterbox for note 2. Hasn't stretched at all. It's a chore to get it off really.
My wife's gs3 otterbox has stretched. But this one is much better.
It's great for falls, but it's not sealed as much as the evo otterbox. Not sure this case would save the note 2 from a fall in the dog water bowl like evo did.
Sent from my SPH-L900 using xda app-developers app
Smidgers said:
I have the otterbox for note 2. Hasn't stretched at all. It's a chore to get it off really.
My wife's gs3 otterbox has stretched. But this one is much better.
It's great for falls, but it's not sealed as much as the evo otterbox. Not sure this case would save the note 2 from a fall in the dog water bowl like evo did.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
How bad does the screen protector deminish screen quality?
GMcD said:
How bad does the screen protector deminish screen quality?
Click to expand...
Click to collapse
Not any more than the evo or gs3 cases. Any time you put a screen protector on, it's not going to be quite the same.
Sent from my SPH-L900 using xda app-developers app
GMcD said:
I....reviews im reading arent very good. ...[the] the outside stretches quickly and the plastic screen protector really diminishes the quality of the screen. ...
Click to expand...
Click to collapse
Not trying to pick on you. But statements like this make me shake my head. Big deal the case scratches. It's better the case than the phone, right? Not that I'm ignorant, and know you don't want some case that's going to look like a cat scratching toy after a month. From what I read, usually the shinny slick cases tend to show more scratches.
As for the screen, I don't think you'll notice much if any deminished screen output from the screen protector if you've been using the Otterbox Defender on previous phones. I don't think it's that likely the screen protector is that much different from other Defenders for other phones.
My guess, I think you're psyching yourself out.
When I had my otterbox, I removed the built in "screen protector" and had a zagg on it. I dont like the built in one as sand and small particles can get inbetween screen and the "protector" and when you use it. Your mashing thos into the screen. I would advise you to remove the screen protector and install your own directly onto the phone. Other than that great case.
Sent from my SPH-L900 using xda app-developers app
With the evo, it was so sealed I didn't want to change screen protectors. With the note 2, that may be an option. But I think that would be the case with any note 2 case
Sent from my SPH-L900 using xda app-developers app
lovekeiiy said:
Not trying to pick on you. But statements like this make me shake my head. Big deal the case scratches. It's better the case than the phone, right? Not that I'm ignorant, and know you don't want some case that's going to look like a cat scratching toy after a month. From what I read, usually the shinny slick cases tend to show more scratches.
As for the screen, I don't think you'll notice much if any deminished screen output from the screen protector if you've been using the Otterbox Defender on previous phones. I don't think it's that likely the screen protector is that much different from other Defenders for other phones.
My guess, I think you're psyching yourself out.
Click to expand...
Click to collapse
Apparently you are ignorant. I said stretches, as in the rubber stretches quickly causing it not to stay on the phone, no scratches.
JamesChilds said:
When I had my otterbox, I removed the built in "screen protector" and had a zagg on it. I dont like the built in one as sand and small particles can get inbetween screen and the "protector" and when you use it. Your mashing thos into the screen. I would advise you to remove the screen protector and install your own directly onto the phone. Other than that great case.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I like this idea and think ill do this. Can you recommend a good screen protector that doesn't degrade the quality much?
GMcD said:
Apparently you are ignorant. I said stretches, as in the rubber stretches quickly causing it not to stay on the phone, no scratches.
Click to expand...
Click to collapse
Well, as lovely of compliment that is, either I don't know know the difference between stretch and scratch, or I wasn't paying close enough attention. Given what I wrote, the safer bet is the later. Thus, my most of drabble was not on point. But I digress....
Back to the topic at hand, As for screen protectors, I suggest checking out this thread, Screen Protector Reviews in the international GN2 subforum. It's 28 pages of this morning. I stopped reading it about a month or so ago. There was another thread, even longer, but it got removed.
Personally, I use the Just Like Glass screen protector. It's a wet application. Covers all viewable screen, but doesn't go to the edge. So cases that go over the edge won't push on it, like TPU cases with lips don't play nice with screen protectors that do go the edge. I'm not sure how the defender sits on the phone off the top of my head, so not sure if the JLG would work well or not. Since you're so rough on phones, it may be. JLG uses similar tech to hurricane glass, and claim it adds 35% shatter resistance; their numbers, not mine. It's stiff, really thin, and it feels very similar to the actual glass. I like it.
It's not perfect. It will get small scratches. I have a couple, but I rarely notice them. There is a rainbow effect that can be seen under halogen lights and the screen off. When the screen is on, you don't see it, at least I never have. It's a side effect from the UV protection the protector has. Some complain that screen protector scratches easily. I don't know how easily, but I have a few, but I don't see them when the display is on. I'm not sure if they came with one or not, but I know JLG owner was looking into getting a dry application model. Plus, unless something has changed, JLG goes give good customer service. Shoot an email to the ower, some guy named Scott, and he'll work with you as much as possible. He knows screen protector isn't for everyone.
It also works very well with the Spen. Others have had issues, from what I read, with Zagg Invisishield. The Spen sticks, unresponsive, to actaully scratching the screen protector. Some have said the Zagg's HD works well. But from what I gathered, for the Spen to work well, you'll want to get the thinner protects, which end up being less scratch resistant.
Here a picture of my GN2 shortly after I put it on:
if you click the picture, you can see a really big picture. But you can see how much of the GN2 it covers. I use a Cruzerlite TPU clear case. I'm still using the same screen protector and case, which has been close to six months.
For me, as long as the flaws are noticeable when the screen is on, it doesn't bother me. It's currently being sold for $13.50, so it's one of the more reasonable priced protectors. It only comes packaged with one protector.
Hopefully that helps.
lovekeiiy said:
Well, as lovely of compliment that is, either I don't know know the difference between stretch and scratch, or I wasn't paying close enough attention. Given what I wrote, the safer bet is the later. Thus, my most of drabble was not on point. But I digress....
Back to the topic at hand, As for screen protectors, I suggest checking out this thread, Screen Protector Reviews in the international GN2 subforum. It's 28 pages of this morning. I stopped reading it about a month or so ago. There was another thread, even longer, but it got removed.
Personally, I use the Just Like Glass screen protector. It's a wet application. Covers all viewable screen, but doesn't go to the edge. So cases that go over the edge won't push on it, like TPU cases with lips don't play nice with screen protectors that do go the edge. I'm not sure how the defender sits on the phone off the top of my head, so not sure if the JLG would work well or not. Since you're so rough on phones, it may be. JLG uses similar tech to hurricane glass, and claim it adds 35% shatter resistance; their numbers, not mine. It's stiff, really thin, and it feels very similar to the actual glass. I like it.
It's not perfect. It will get small scratches. I have a couple, but I rarely notice them. There is a rainbow effect that can be seen under halogen lights and the screen off. When the screen is on, you don't see it, at least I never have. It's a side effect from the UV protection the protector has. Some complain that screen protector scratches easily. I don't know how easily, but I have a few, but I don't see them when the display is on. I'm not sure if they came with one or not, but I know JLG owner was looking into getting a dry application model. Plus, unless something has changed, JLG goes give good customer service. Shoot an email to the ower, some guy named Scott, and he'll work with you as much as possible. He knows screen protector isn't for everyone.
It also works very well with the Spen. Others have had issues, from what I read, with Zagg Invisishield. The Spen sticks, unresponsive, to actaully scratching the screen protector. Some have said the Zagg's HD works well. But from what I gathered, for the Spen to work well, you'll want to get the thinner protects, which end up being less scratch resistant.
Here a picture of my GN2 shortly after I put it on:
if you click the picture, you can see a really big picture. But you can see how much of the GN2 it covers. I use a Cruzerlite TPU clear case. I'm still using the same screen protector and case, which has been close to six months.
For me, as long as the flaws are noticeable when the screen is on, it doesn't bother me. It's currently being sold for $13.50, so it's one of the more reasonable priced protectors. It only comes packaged with one protector.
Hopefully that helps.
Click to expand...
Click to collapse
I appreciate the reply. After doing a ton of searching, I found just about everyone who bought a SGP Ultra Oleophobic seemed to love it so I'm gonna try that. I wanted to get the just like glass but the wet application sort of scared me away. I'll report my findings when I get it and the phone.
JamesChilds said:
When I had my otterbox, I removed the built in "screen protector" and had a zagg on it. I dont like the built in one as sand and small particles can get inbetween screen and the "protector" and when you use it. Your mashing thos into the screen. I would advise you to remove the screen protector and install your own directly onto the phone. Other than that great case.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I agree with this.
Sent from my SPH-L900 using xda premium
I really like zagg. They give you lifetime warranty so if protector begins to peel you can get another for free.
Sent from my SPH-L900 using xda app-developers app
JamesChilds said:
I really like zagg. They give you lifetime warranty so if protector begins to peel you can get another for free.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Not really free. You have to return the original and pay for shipping. Now Otterbox's warranty is second to none. Just send it pics of damage and they will send you out a replacement completely free of charge. Now when I bought the first black Defender I had a pretty nice gap between the built in screen protector and the phone's screen. It really was annoying especially playing games or texting. I ended up giving that one to my wife and buying the grey/white one off Amazon for $35. This one has no gap and fits like its supposed to. It's been a few months and I've had no problem with dust in screen or silicone stretching. This one seems to be built correctly. Not so much for the Defender for my EvoLTE. Been a year and I'm on my 5th one.
Sent from my SPH-L900 using Xparent Skyblue Tapatalk 2
Otterbox Warranty: they didn't even request a picture when my evo case broke. Just took down the info and sent me a new one and told me to discard the old one.
I was amazed. Shows how much they stand behind their product.
Sent from my SPH-L900 using xda app-developers app
I bought the white glacer outer box with holster and only used it one day....its too big any one wants to buy it send me a pm.
Sent from my SPH-L900 using Tapatalk 2
I popped out the screen protector part as dust kept getting in the stupid hole they cut in it. My phone stays in my pocket with nothing else so no scratches on the screen. If I'm going to throw my phone in my wife's bag when traveling or something like that I bring the clip to protect it. Worked for me so far..
I'm a contractor and I've put my otter box through hell, I remove it every night and have for six months and it hasn't stretched a bit. My phone is still cherry because of this case, I've dropped it 10 feet gotten concrete on it and it's coated in crap every day. Once you get used to all the iPhone kids making fun of the size it's awesome!
Sent from my SPH-L900 using xda app-developers app
They make fun because they are jealous.
Sent from my little Note2
maybe. I think it's more from ignorance and being mindless Apple-drones.