Develop Bugs

[Q] Kindle fire boot freeze

I've recently rooted my kindle fire and it has twrp and fff, I wanted to be back in stock "unbrick" so I shut down my kindle fire to go into twrp. I plugged my usb cable and sent the "unroot" file ti my kindle drive to unbrick it, but after i done that, I go to install to find the file i downloaded to i could flash it, but it wasn't there. I notice too everytime i plug in my kindle to my computer theres no "check" mark next to kindle when i plug it in. And the other problem is that I try to go back to my normal rooted kindle fire, and its stuck at the orange and white animated boot screen and it doesnt even flash. it just sits there and do nothing.
Any help would be thankful.

Josepho1997 said:
Um... I didn't understand any of that. Did you rename the stock os files to update.zip? If you didn't, rename it to update.zip and then use TWRP to mount your Kindle Fire and transfer the file. Then do a wipe and flash the update.zip.
Click to expand...
Click to collapse
yes, i changed the file name to update.zip and went to wipe and did a factory reset. My kindle fire can't find the file :/ don"t know why, please help

Make sure you wipe system and all before u flash
Sent from my Amazon Kindle Fire using xda app-developers app

here here I just wonder how many times androidproblems will brick his device:silly:

Thepooch said:
here here I just wonder how many times androidproblems will brick his device:silly:
Click to expand...
Click to collapse
Seriously...look at his topics
Sent from my Amazon Kindle Fire using xda app-developers app

Unable to Root my Kindle Fire(6.3.1) using KFU

I tried to root my Kindle Fire using KFU 0.9.6. But am unable to root, only the TWRP got installed.
In almost all the websites I found that once TWRP got installed properly then the yellow triangle will appear during reboot. But am unable to see that during reboot.
But am able to see kindle fire with blue color, instead of the ellow Triangle
could someone help me out in this?
thx in advance.

snaveenraja said:
I tried to root my Kindle Fire using KFU 0.9.6. But am unable to root, only the TWRP got installed.
In almost all the websites I found that once TWRP got installed properly then the yellow triangle will appear during reboot. But am unable to see that during reboot.
But am able to see kindle fire with blue color, instead of the ellow Triangle
could someone help me out in this?
thx in advance.
Click to expand...
Click to collapse
how do you know that TWRP got installed if you can't see the bootloader icon? Maybe try a different version of KFU, 0.9.5 works for me. Also be sure that your KFU recognizes your kindle when it's plugged in. The ADB status should say ONLINE in the main menu window.

Try this video on how to root 6.3.1 it works for me perfectly fine just make sure you follow all of the steps word for word. Just go to YouTube and type in "how to root kindle fire nat3mil" I would have posted a link but I'm new so it won't let me post links.
Sent from my Galaxy Nexus using xda app-developers app

The yellow icon is the old version . The Kindle Fire with Fire in blue is the new version. It threw me off when I rooted mine for the 1st time too.
Sent from my LG-AS680 using xda app-developers app

UltraViolence74 said:
The yellow icon is the old version . The Kindle Fire with Fire in blue is the new version. It threw me off when I rooted mine for the 1st time too.
Sent from my LG-AS680 using xda app-developers app
Click to expand...
Click to collapse
Yeah, this should be the version of Fire Fire Fire (1.4a) that was installed with KFU 0.9.6. There is a slight bug in the load up that will require you to tap the power button a few times to be able to switch between loaders (Normal, Recovery, Fast). Hashcode knows of it but it's not really a priority at this point since it's not causing anyone issues getting in to Recovery. Just a couple extra taps of the power button does the trick.
If you're looking to do a full wipe of the stock rom, make sure you clear cache, dalvik cache and do a factory reset.

I got to know that its bcoz of firefirefire am unable to see the yellow triangle. Now I flashed using the prerooted stock Rom. Installed play store. Working gr8... thanks for all those replied...
Sent from my Kindle Fire using xda app-developers app

HELP
snaveenraja said:
I got to know that its bcoz of firefirefire am unable to see the yellow triangle. Now I flashed using the prerooted stock Rom. Installed play store. Working gr8... thanks for all those replied...
Sent from my Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
Men i have the same problem you have... and im unable to fix it... can you explian to me... step bye step how to... PLEASE.....
Thanx

Rooted Amazon Kindle Fire with KFU Utility
Hey guys just wanted to give a little input. I was able to use the KFU utility ( the newest version ) and it worked just fine. I now have the Recovery installed TWRP but flashed Clockwork Recovery and all works. I'm looking to flash a 4.0 ICS version but haven't found the right source or file. Maybe I can be lead in the right direction. Thanks in advance! !!! Also uploading pic:
Sent from my Kindle Fire using xda premium

I also had problems with the latest KFU. I was left with 'partially' rooted device. I installed superuser.apk after that and now it's OK. I can even temporary unroot it to using OTA RootKeeper. AFAIK the only way to watch Amazon Prime videos is to temporary unroot the device.
Sent from my Kindle Fire using xda app-developers app

Hey just wanted to reply about video player. I also was having problems playing videos after downloading videos like 3gp's and MP4's respectively. I downloaded a video player for those formats and now no longer have a problem viewing videos after download.
Sent from my SCH-I800 using xda premium

AndroidLover813 said:
Hey guys just wanted to give a little input. I was able to use the KFU utility ( the newest version ) and it worked just fine. I now have the Recovery installed TWRP but flashed Clockwork Recovery and all works. I'm looking to flash a 4.0 ICS version but haven't found the right source or file. Maybe I can be lead in the right direction. Thanks in advance! !!! Also uploading pic:
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
I highly suggest you do not use ClockWorkMod Recovery with the Kindle Fire. It has been known to cause the Kindle to brick. Stick with TWRP even if you don't like it.

Unable to root! Stucked on TWRPP 2.2.0 Screen with several options
Hello,
I've tried to root my Kindle fire using KFU 0.9.6)
However, when the KFU is processing the rooting, the kindle restarts and stucks itself on the TWRPP Screen with several options (Install, Backup, Restore...) and the KFU software shows a message of Please wait.
Does anyone know how to move on with the rooting?
Thanks in advanced

http://forum.xda-developers.com/showthread.php?p=25730650

Same problem except nothing shows on the kindle
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

androidGuy302 said:
Same problem except nothing shows on the kindle
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Really? Nothing shows on the Kindle at all? You get absolutely no graphics of any kind whatsoever?

I believe the my computer was getting in the way of KFU but I unpluged it started up and I tried again with success
sent from the Galaxy S3 i747

[Q] G-Apps on a new JB ROM

First of all, I'd like to thank you all that make this community so valuable to us. I read the forum since I got my KF, around 6 months ago, and all the tutorials are very well detailed.
Today I tried to install a new ROM on my Kindle for the first time. It all went well, and I successfully installed the stock Jelly Bean from Hashcode. But the problem now is: I don't know how to install the GApps on it.
I'm trying to use the ADB and Kindle Fire Utility but it doesn't find the device.
Anyone of you guys could give me a hand with that problem?
Thanks

Are you using twrp? You flash gapps onto it the same way you flash a Rom. Boot into twrp, go to install, locate the directory where you have the gapps.zip file stored and click on it, flash it. Then wipe cache/ and dalvik cache and reboot.
Sent from my Amazon Kindle Fire using xda app-developers app

jlshady00 said:
Are you using twrp? You flash gapps onto it the same way you flash a Rom. Boot into twrp, go to install, locate the directory where you have the gapps.zip file stored and click on it, flash it. Then wipe cache/ and dalvik cache and reboot.
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
I think the problem is with the adp drivers...I can not find my device so I can restart it with TWRP.

Ok but if you have fire fire fire and twrp installed already you should be able to bout into twrp by pushing the power button repeatedly during startup until it shows you voting into recovery mode.
Make sure you have the correct drivers installed,I believe the kf should show up as composite adb interface device on your pc with the right drivers. Someone else might be able to help you more but really the easiest way to flash gapps is to do it through twrp the exact same way you flash the new Rom minus the system wipe and factory reset.
Your device is a first gen kindle I assume?
Sent from my Amazon Kindle Fire using xda app-developers app

jlshady00 said:
Ok but if you have fire fire fire and twrp installed already you should be able to bout into twrp by pushing the power button repeatedly during startup until it shows you voting into recovery mode.
Make sure you have the correct drivers installed,I believe the kf should show up as composite adb interface device on your pc with the right drivers. Someone else might be able to help you more but really the easiest way to flash gapps is to do it through twrp the exact same way you flash the new Rom minus the system wipe and factory reset.
Your device is a first gen kindle I assume?
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
Yes, it is a first gen Kindle.
I'm trying to boot to TWRP pressing the power button during startup but either I'm doing it wrong or something went bad after I installed the ROM.
I also tried to install the ADB driver in another computer but after I connect the kindle the PC recognizes it only as "Amazon Kindle Fire", and not the ADB interface.
I don't know what to do. But thanks for your help!

Try using the pc that is recognizing it as a kindle fire, uninstall the kindle fire drivers through device manager and then install the Google adb drivers, then hook the kindle back up to it via usb and see if it shows up correctly then?
Is your boot screen showing kindle fire in blue and white or the stock orange or something else?
Sent from my Amazon Kindle Fire using xda app-developers app

jlshady00 said:
Try using the pc that is recognizing it as a kindle fire, uninstall the kindle fire drivers through device manager and then install the Google adb drivers, then hook the kindle back up to it via usb and see if it shows up correctly then?
Is your boot screen showing kindle fire in blue and white or the stock orange or something else?
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
jlshady00, I finally managed to install it! Thank you very much for the help!

No problem hope I made it a little easier on you, click thanks on my post if I did and you don't mind. Enjoy the new Rom!
Sent from my Amazon Kindle Fire using xda app-developers app

jlshady00 said:
No problem hope I made it a little easier on you, click thanks on my post if I did and you don't mind. Enjoy the new Rom!
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
The ROM is indeed much better than the stock one on the KF.

HELP! Cyanogenmod Broke My Kindle Fire!

Hello all,
Right now I am getting very pissed at my kindle. I rooted it with KFU and installed TWRP and then flashed it to twa_priv's CM10.1/SGT7 ROM. After flashing it and gApps it got stuck on the cyanogen boot screen/animation. I tried to reboot it but it doesn't even show the option to go into TWRP anymore. It shows the orange Kindle Fire logo then goes straight to cyanogen and the logo just keeps spinning. I am getting ADB status when I connect it to KFU but I can not do anything with it or put it into Fastboot. Any help would be greatly appreciated at this point!

Seriously no help?

stergmtl said:
Seriously no help?
Click to expand...
Click to collapse
Patience grasshopper
stergmtl said:
Right now I am getting very pissed at my kindle. I rooted it with KFU and installed TWRP and then flashed it to twa_priv's CM10.1/SGT7 ROM. After flashing it and gApps it got stuck on the cyanogen boot screen/animation. I tried to reboot it but it doesn't even show the option to go into TWRP anymore. It shows the orange Kindle Fire logo then goes straight to cyanogen and the logo just keeps spinning. I am getting ADB status when I connect it to KFU but I can not do anything with it or put it into Fastboot. Any help would be greatly appreciated at this point!
Click to expand...
Click to collapse
You shouldn't be mad at the Kindle, it didn't do anything wrong.
On the other hand, you probably failed to wipe system and factory reset before flashing the ROM (installation instructions are in twa_priv's SGT7 thread btw). Unfortunately, short of opening the case and list of other things that are outside the scope of this conversation, you're going to need a factory cable to get into fastboot.
Sent from my KFHD 8.9 using Tapatalk 2

Discourse wtorjt
soupmagnet said:
Patience grasshopper
You shouldn't be mad at the Kindle, it didn't do anything wrong.
On the other hand, you probably failed to wipe system and factory reset before flashing the ROM (installation instructions are in twa_priv's SGT7 thread btw). Unfortunately, short of opening the case and list of other things that are outside the scope of this conversation, you're going to need a factory cable to get into fastboot.
Sent from my KFHD 8.9 using Tapatalk 2
Click to expand...
Click to collapse
I have the wall charger if that's what you mean by factory cable. Any more instructions you can give me so I can get back into TWRP?

If you're getting adb and the Kfu works why cant you just change to fadtboot from there?or re install root from here, adb should be able to give command line to access twrp
Sent from my Kindle Fire using xda app-developers app

Vintage144 said:
If you're getting adb and the Kfu works why cant you just change to fadtboot from there?or re install root from here, adb should be able to give command line to access twrp
Sent from my Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
Because you need the shell to do so.
stergmtl said:
I have the wall charger if that's what you mean by factory cable. Any more instructions you can give me so I can get back into TWRP?
Click to expand...
Click to collapse
No, the factory cable is different. Look in the KF General forum for more information.
Sent from my KFHD 8.9 using Tapatalk 2

soupmagnet said:
Because you need the shell to do so.
No, the factory cable is different. Look in the KF General forum for more information.
Sent from my KFHD 8.9 using Tapatalk 2
Click to expand...
Click to collapse
Would you recommend buying one on ebay from china?

stergmtl said:
Would you recommend buying one on ebay from china?
Click to expand...
Click to collapse
Personally I would say go with Skorpn's. They are made in small batches with great quality, fairly inexpensive, fast shipping, and everyone who gets theirs from him seem quite pleased with it overall. He's got a pretty good reputation on XDA so you should probably look into it, if not for that reason alone.
Sent from my KFHD 8.9 using Tapatalk 2

[Q] kindle 6.3.3 how to root?

not 6.3.2

kindle fire utility boot status unknown
adb is online..how to looting?

Use Kindle Fire Utility to root.
Sent from my XT894 using Tapatalk

sd_shadow said:
Use Kindle Fire Utility to root.
Sent from my XT894 using Tapatalk
Click to expand...
Click to collapse
I've been trying last night and today, and it won't work. The version is 6.3.3. Drivers are fine, shows up as Android Composite ADB Interface in device manager on windows 7. I can access the Kindle as a drive on my PC. When I run Kindle Fire Utility 0.9.9, it reports
ADB Status: Online
Boot Status: Unknown.
If I try to either manually set fastboot with option 1 Bootmode Menu, or try to "Install Permanent Root with Superuser" option 2, it has
Installing Permanent Root
Activating Fastboot (4002)
5090 KB/s (510876 bytes in 0.09x) then this:
couldn't write bp1, panic!
finds twrp.img, and downloads fff.bin. Then the kindle reboots, KFU says "Installing FFF..." and <waiting for device>.
But then does nothing, even after I swipe the lock and go back into file transfer mode on the kindle.
Anything I try to do reports "couldn't write bp1, panic!" on KFU. I have another kindle that rooted fine, this one just refuses to.
Any ideas?

AviatorDave said:
I've been trying last night and today, and it won't work. The version is 6.3.3. Drivers are fine, shows up as Android Composite ADB Interface in device manager on windows 7. I can access the Kindle as a drive on my PC. When I run Kindle Fire Utility 0.9.9, it reports
ADB Status: Online
Boot Status: Unknown.
If I try to either manually set fastboot with option 1 Bootmode Menu, or try to "Install Permanent Root with Superuser" option 2, it has
Installing Permanent Root
Activating Fastboot (4002)
5090 KB/s (510876 bytes in 0.09x) then this:
couldn't write bp1, panic!
finds twrp.img, and downloads fff.bin. Then the kindle reboots, KFU says "Installing FFF..." and <waiting for device>.
But then does nothing, even after I swipe the lock and go back into file transfer mode on the kindle.
Anything I try to do reports "couldn't write bp1, panic!" on KFU. I have another kindle that rooted fine, this one just refuses to.
Any ideas?
Click to expand...
Click to collapse
You have another kindle that has 6.3.3 that rooted with no issues? Just curious. Planning on rooting mine as well and looking for any insight as I don't want to brick my device since it updated to 6.3.3 on me.

nathan.stanford said:
You have another kindle that has 6.3.3 that rooted with no issues? Just curious. Planning on rooting mine as well and looking for any insight as I don't want to brick my device since it updated to 6.3.3 on me.
Click to expand...
Click to collapse
Yes, I actually had 2 of them that rooted fine. They are all KF HD 7" First Generation. This one just won't. I'm now working with the KF First Aide tool kit, and I now get SU: ACCESS DENIED or something like that. Communication with ADB is fine, there's a permission issue somewhere I can't figure out.

Towelroot.com
Sent from my SCH-I545 using Tapatalk

joshuabg said:
Http://Towelroot.com
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2783157
Sent from my XT894 using Tapatalk
---------- Post added at 01:34 PM ---------- Previous post was at 01:33 PM ----------
Think your link has an extra http://
Sent from my XT894 using Tapatalk

sd_shadow said:
http://forum.xda-developers.com/showthread.php?t=2783157
Sent from my XT894 using Tapatalk
---------- Post added at 01:34 PM ---------- Previous post was at 01:33 PM ----------
Think your link has an extra http://
Sent from my XT894 using Tapatalk
Click to expand...
Click to collapse
Hmmm. Downloaded it, installed it. The "make it rain" button that says it will reboot my device does not.

Rooting Kindle running 6.3.3
so you have successfully rooted a kindle fire hd running 6.3.3? I have spent all day trying to figure out how to root mine and install a version of jelly bean. Could you point me in the direction of what versions of jellybean/kindle fire utility to use? i have tried using kf utility 0.9.9 and i have the same issue as you where it says the device is online but the boot status is unknown. Thx for the help.

Rob251 said:
so you have successfully rooted a kindle fire hd running 6.3.3? I have spent all day trying to figure out how to root mine and install a version of jelly bean. Could you point me in the direction of what versions of jellybean/kindle fire utility to use? i have tried using kf utility 0.9.9 and i have the same issue as you where it says the device is online but the boot status is unknown. Thx for the help.
Click to expand...
Click to collapse
Awww crapola. Nevermind. All I knew was that both of them were on 6.3.3, so I thought that was what they've always been on. Bzzzzt. The one that was working still has the adw launcher installed, but it doesn't have root any more. So THAT'S why KFU doesn't work on this new one.
They are my girlfriend's kids' kindles, and I told her not to ever update them, but I guess this one was pushed out.
So.... how long until theres a root kit for 6.3.3?

AviatorDave said:
Awww crapola. Nevermind. All I knew was that both of them were on 6.3.3, so I thought that was what they've always been on. Bzzzzt. The one that was working still has the adw launcher installed, but it doesn't have root any more. So THAT'S why KFU doesn't work on this new one.
They are my girlfriend's kids' kindles, and I told her not to ever update them, but I guess this one was pushed out.
So.... how long until theres a root kit for 6.3.3?
Click to expand...
Click to collapse
Hopefully soon, i heard towelroot this new program/website that roots a bunch of devices may work. have you heard anything about it? i dont want to brick my kindle.

Rob251 said:
Hopefully soon, i heard towelroot this new program/website that roots a bunch of devices may work. have you heard anything about it? i dont want to brick my kindle.
Click to expand...
Click to collapse
Didn't brick it, but didn't work either. The apk installs just fine, but when I click the "make it rain" button that says the device will reboot, nothing happens. The device does not reboot, and is not rooted. I tried rebooting the kindle and trying again with the same result. I guess I now fit the definition of insanity.

AviatorDave said:
Didn't brick it, but didn't work either. The apk installs just fine, but when I click the "make it rain" button that says the device will reboot, nothing happens. The device does not reboot, and is not rooted. I tried rebooting the kindle and trying again with the same result. I guess I now fit the definition of insanity.
Click to expand...
Click to collapse
And... tried V2 of towelroot this morning. Still no worky-worky.
Somebody get a straitjacket.

Old rooting methods not working yah...
What I have done -
1. fastboot using factory cable
2. install TWRP+FFF with KFU
3.flash modified pre-rooted ROM
If Amazon continues updating 1st gen, not sure there are lots of enthusiasts, who would continue rooting it. Thus decided to switch to alternative ROM. Well, stock is better for battery etc... etc... but as I do also have HDX and most of time use it, having stock ROM on 1st gen is not as crucial for me.

According to this post (and the post above^^), if you have a factory cable (special cable used to power on in bootloader mode), you can revert to a custom recovery and bootloader and then flash a 6.3.2 ROM. Problem then is avoiding another OTA.
http://forum.xda-developers.com/showpost.php?p=53532982&postcount=2

my fff said:
in cmd driver number showing.but in kfu boot status unknown...adb driver composit installed..
why that? kfu trouble?kindle version 6.3.3 is 6.3.2 same thing?
Click to expand...
Click to collapse
see firmware 6.3.3 -=Post your rooting progress here=-
---------- Post added at 08:37 AM ---------- Previous post was at 08:36 AM ----------
Please don't just start a new thread, when you don't get the answer you want.

my fff said:
Not Kfu. In cmd kindle fire tooting
Click to expand...
Click to collapse
no toot for 6.3.3, cmd other otherwise

To root new update 6.3.3, you need a fastboot/factory cable, adb/ fastboot.exe files, FFF bootloader.bin, twrp.img, and my prerooted 6.3.3 zip
Kindle Fire Utility does not work with 6.3.3 update
Sent from my XT894 using Tapatalk