Related
In several places in the forums I see DSP manager mentioned as a way to change the sound output from the phone.
It is possible to use the .apk file or flash the .zip file to a stock firmware that is rooted (no other changes), or does it have to be applied to a custom rom?
Ta.
Here you go...
http://www.multiupload.com/7VS5O9KKQ0
Flash as you would a ROM
Hmm, I flashed it and the settings appeared, but they seem to make no difference to the sound output!
Trying via headphones? As I doubt you'd notice from the internal speaker
Other than that I can't help, have no issues personally
Yep, trying via headphones. Seems to make no difference at all. I am running a stock rooted HTC Rom.
Hi, I flashed the DSP from recovery and rebooted. Installation was successful but I can't find the app anywhere in my phone? where do I see it?
SOLUTION
ilya.glants said:
Hi, I flashed the DSP from recovery and rebooted. Installation was successful but I can't find the app anywhere in my phone? where do I see it?
Click to expand...
Click to collapse
For anyone else having this problem:
I didn't find the app I installed so I searched the net for other installation files, and found this:
h ttp://androidforums.com/1446319-post107.html
after I flashed this and rebooted, I got a 'force close' notification for the app. Than I went to /system/app/DSPManager.apk and installed it.
DSP Manager now working great ^^
I did as u said but it gives me a force close and when i try to install it i cant cause its already installed, cant uninstall it either, what should i do ? BTW I'm using AuraxTSense v7.4
did you install the one in the second post as well?
I'm using AuraxTSense 7.0
Yes, first I installed that one, it didn't work, then I installed the other. Is that the problem ? I thought so... so how should I fix it ?
good question..I'm not sure.. try installing the first again
Ok I did it, it removed the app from the app list. What now ? If I try installing it from /system/app it gives an error.
I don't know.. i just rebooted my device and it gave me the force close again. so I did what I did the previous time and ran that app from the location I wrote.. worked like a charm.. again..
ilya.glants said:
I don't know.. i just rebooted my device and it gave me the force close again. so I did what I did the previous time and ran that app from the location I wrote.. worked like a charm.. again..
Click to expand...
Click to collapse
I installed the other zip again, gave me a force close so went to system/app and tried to install it but I can't, only have the options uninstall and launch... No idea why is it working for you and not for me...
EDIT: Ok it works now, had to remove first the odex file and install the other zip again
Update DSP Manager
You can remove the DSPManager.apk file using the terminal emulator.
NOTE: You need to have a rooted phone, Superuser & Terminal emulator.
STEPS
1. Change to root user it is granted super-user permissions.
su -2. Then change to the system app directory.
cd /system/app3. Then move the DSPManager.apk to the tmp directory.
mv DSPManager.apk /tmp4. Move the new apk file to the system app directory.
NOTE: Change to the directory where the DSPManager_1.0.apk is.
cp DSPManager_1.0.apk /system/app5. Reboot the phone.
6. Check in the apps list and the new DSP Manager should be in there.
NOTE: If it all worked you can remove the DSPManager.apk from /tmp
rm /tmp/DSPManager.apk
Attached is the version I use on my rooted HTC Desire.
In order to work, DSP Manager also needs a file called libaudioflinger.so in the /system/lib directory in addition to the apk.
The easy way to get this done is to use an update zip for DSP Manager. Get it from one of these links (all links from this page):
FileServ
MultiUpload
My FTP
doesnt get android to work on my hd 2... i managed it once but since i updated my android build i dont get it anymore...
i think it because i dont have an root folder in the android folder where i can put the files in ????????
if i just install it from the zip via astro explorer it appears in the menue but there is no change in audio ?!?!?!
what can i do ???
B-Man2005 said:
doesnt get android to work on my hd 2... i managed it once but since i updated my android build i dont get it anymore...
i think it because i dont have an root folder in the android folder where i can put the files in ????????
if i just install it from the zip via astro explorer it appears in the menue but there is no change in audio ?!?!?!
what can i do ???
Click to expand...
Click to collapse
I don't think you can install the zip from Astro Explorer because it needs to copy files to the /system partition which is read-only when the phone is booted up. In other words, you must have a rooted phone to do this.
If you do have a rooted phone, then reboot into recovery mode and install the update.zip the usual way.
If you don't have a rooted phone, well that's a whole different story.
i , please help me.
I've installed it via recovery and I made backup with my original needly files: libaudioflinger and libaudio. Then i copied my files back (deleted new files and moved old files) . I restarted my phone and it didn't boot. Just show me the White window (T-mobile)... Can i repair my phone by myself? Please help me and sorry for my english.
maximus rus said:
i , please help me.
I've installed it via recovery and I made backup with my original needly files: libaudioflinger and libaudio. Then i copied my files back (deleted new files and moved old files) . I restarted my phone and it didn't boot. Just show me the White window (T-mobile)... Can i repair my phone by myself? Please help me and sorry for my english.
Click to expand...
Click to collapse
I'm sorry I don't really understand the problem. Normally, installing the update.zip should be all that you need to do. I don't understand why you copied the old files back and were those two files the only files that you backed up?
Hello,
I've removed the Gallery app (com.htc.album.apk) using the Titanium backup 'cause I wanted to replace it with another one. I do have the backup, but when I do a restore it just does the circle with restore in progress forever. Is there a way to restore the Gallery?
The only reason why I want to restore is that when I use the HTC Sense apps which cooperate with Gallery (for example the Camera), when I want to see the photos the apps crash - I thought it would be possible to choose another app like QuickPic for this photo browsing, but apparently not. Therefore I would be very grateful if somebody knows how to restore the app.
The phone has s-off and is rooted.
Thank you very much.
SOLUTION
OK, I've found a way how to do it, so just want to share with others, in case anybody gets into the same kinda trouble as I did ;-)
The steps:
1. Download the zipped RUU of the stock ROM and extract the APK and ODEX files of the app you want to restore (HTCAlbum.apk and HTCAlbum.odex in my case)
2. Using Root Explorer (or some other tool that can write into /system/app) copy the apk and odex files into it.
3. Again using the same tool set the permissions of the 2 files to rw-r--r-- and set the owner and group to 0 - root (both user and group)
4. What I did now was try to Install the apk in the /system/app, but it failed, so probably this step is not needed - just put it here in order to reproduce exactly all steps.
5. Reboot the phone -> after the reboot the app should appear in the app drawer and all HTC stock apps now work with using the Gallery.
Please if you try this method, write down your comment, whether you succeeded or not.
Cheers and good luck...
Didn't work for me. Tried apk and odex gallery from newest ruu.
I also accidentally removed the Gallery (com.htc.album.apk), and I've found a way out to do it.
First to do :
> Install the latest Java JDK.
> Install HTC Sync & drivers.
> Install the Android SDK.
> Open SDK Manager after installing the Android SDK successfully.
> Install every 'Available Packages' in SDK Manager.
> Edit 'Path' in Environmental Variables and put this behind the line
Code:
;C:\android-sdk-windows\platform-tools
> Enable USB Debugging on your HTC.
And after all this above..
1 -Connect your Wildfire to the PC.
2 -Reboot into CWM Recovery.
3 -Go to Mounts and Storage.
4 -Select Mount /system.
Then use adb :
Oh and make sure the HTCAlbum.apk is in the same map as adb.exe
Code:
adb push HTCAlbum.apk /system/app
-MAKE SURE YOUR DEVICE IS S-OFF- Otherwise it won't work.
Solar_ said:
MAKE SURE YOUR DEVICE IS S-OFF- Otherwise it won't work.
Click to expand...
Click to collapse
This doesn't need S-OFF. Just a Custom Recovery like Clockworkmod.
rocky7x said:
OK, I've found a way how to do it, so just want to share with others, in case anybody gets into the same kinda trouble as I did
The steps:
1. Download the zipped RUU of the stock ROM and extract the APK and ODEX files of the app you want to restore (HTCAlbum.apk and HTCAlbum.odex in my case)
2. Using Root Explorer (or some other tool that can write into /system/app) copy the apk and odex files into it.
3. Again using the same tool set the permissions of the 2 files to rw-r--r-- and set the owner and group to 0 - root (both user and group)
4. What I did now was try to Install the apk in the /system/app, but it failed, so probably this step is not needed - just put it here in order to reproduce exactly all steps.
5. Reboot the phone -> after the reboot the app should appear in the app drawer and all HTC stock apps now work with using the Gallery.
Please if you try this method, write down your comment, whether you succeeded or not.
Cheers and good luck...
Click to expand...
Click to collapse
It worked! Thank you:good:
What is it and why am I getting this prompt? I'm rooted with 2.3.4
Obviously I shouldn't accept this update but does anyone know what this is?
Sent from my Xoom using xda premium
Hi. I am new.
I just installed the ROM 2.3.4 last night that was posted in the xda forum(upgraded manually from 2.2 on a Unrevoked rooted Dinc).
I installed the 4.06 ROM and I am reading the official was 4.08...
Do I need another upgrade? Or is this 'the' upgrade that is for root users?
Not trying to steal your post ugxvibe. both of our questions might have similar answers.
if you update will you lose root control? What about all the apps? I'm most concerned about not being able to tether...
Just flash wildstangs 4.08.605.2 ota rom. It is the newest ota update, but already rooted.
how do I do that? Through rom manager?
Is there a way to stop the update reminder from popping up without actually installing it? I'm afraid I might mess up my phone and don't want to risk losing everything g on it.
Guys, to stop the prompt from appearing just press install and it will try to reboot but will just error and u will never see it again trust me .
Sent from my HTC Droid Incredible using xda premium
d-pabs said:
how do I do that? Through rom manager?
Is there a way to stop the update reminder from popping up without actually installing it? I'm afraid I might mess up my phone and don't want to risk losing everything g on it.
Click to expand...
Click to collapse
Yes thru rom manager.
You can dissable the notifications by editing your /system/build.prop file. Look for:
ro.config.htc.nocheckin = 0
and change the 0 to a 1. If you dont see that line add it somewhere in the file.
I went to make the nocheckin = 1 modification, but I already had it, and I'm still getting the update notifications. Not even sure how it got there. All I've done is root with Unrevoked, maybe that does the edit?
NetGoo said:
I went to make the nocheckin = 1 modification, but I already had it, and I'm still getting the update notifications. Not even sure how it got there. All I've done is root with Unrevoked, maybe that does the edit?
Click to expand...
Click to collapse
It should have worked, you may need to clear the cache partition. Or there is another method go to /etc/security and rename otacerts.zip to otacerts.zip.bak
Like what was said above...
If you have Clockwork or some other custom recovery, if you just allow it to update when prompted, it will not install and will cause no other problems. You must have the stock recovery in order for the update to install.
It CANNOT install if you don't have the stock recovery.
But, I would also go into the /cache directory and find the update file and zap it (It will be obvious). I just use ADB and "rm" it from my PC. You could use root explorer or something. Otherwise you will have a big update file just sitting there and hogging space.
cmlusco said:
It should have worked, you may need to clear the cache partition. Or there is another method go to /etc/security and rename otacerts.zip to otacerts.zip.bak
Click to expand...
Click to collapse
I found the file thru root explorer but cannot change it due to message that says it's read only. other options?
Thanks.
bgtruitt said:
I found the file thru root explorer but cannot change it due to message that says it's read only. other options?
Thanks.
Click to expand...
Click to collapse
At the top of the screen in Root Explorer, change r/o to r/w. Then make your change.
Sent from my ADR6300 using xda premium
im rooted n using the clockworld mod for roms, I attempted to run the 4.08 update from User wildstang following the instructions but after installing the update n rebooting it just sits at "Dorid incredible" white screen and never boots. I may be doing something wrong here, can someone break it down for me? suggestions?
NOTE: I use CWMR 5X. Some wipe options below are not included in earlier recovery versions. Still wipe what is available the best you can.
1. Put the Rom on the root of your SD Card
2. Compare MD5 Sum
Windows: MD5 Calculator
LINUX: Open Terminal and type: md5sum [path to the rom on your sd card]
Mac: Open a terminal and type: md5 [path to the rom on your sd card]
3. Reboot to Recovery
4. Wipe these:
Main Screen:
wipe data/factory reset - x2
wipe cache partition - x2
Advanced:
Wipe Dalvik Cache - x3
Wipe Battery Stats - optional
Mounts and Storage:
Format-
/boot - x2
/system - x2
/datadata - x2
/data - x2
/cache - x2
5. Install Rom from SD Card by going back and selecting install from SD card.
6. Reboot and enjoy!
followed each step to the letter but still wont boot : /
Ok i changed nothing in the method of installing the rom and for whatever reason it worked!! 4.08 now phone is 10X faster and im loving it. Only issue i see now is i cannot get back into clockworld mod! why is that? i hold down power and vol down for a long time and when release it just starts the boot sequence any suggestions?
clutchdroid said:
Ok i changed nothing in the method of installing the rom and for whatever reason it worked!! 4.08 now phone is 10X faster and im loving it. Only issue i see now is i cannot get back into clockworld mod! why is that? i hold down power and vol down for a long time and when release it just starts the boot sequence any suggestions?
Click to expand...
Click to collapse
Uncheck fastboot in menu > applications.
Thank you sir.
clutchdroid said:
Ok i changed nothing in the method of installing the rom and for whatever reason it worked!! 4.08 now phone is 10X faster and im loving it. Only issue i see now is i cannot get back into clockworld mod! why is that? i hold down power and vol down for a long time and when release it just starts the boot sequence any suggestions?
Click to expand...
Click to collapse
I had the same problem, but after two times running the install its still getting the hang. Hopefully I'll get better luck on try #3.
Did you figure out what caused the temporary issue?
spitzaf said:
I had the same problem, but after two times running the install its still getting the hang. Hopefully I'll get better luck on try #3.
Did you figure out what caused the temporary issue?
Click to expand...
Click to collapse
I may have missed a format inside mounts and storage make sure you hit them all.
cmlusco said:
Yes thru rom manager.
You can dissable the notifications by editing your /system/build.prop file. Look for:
ro.config.htc.nocheckin = 0
and change the 0 to a 1. If you dont see that line add it somewhere in the file.
Click to expand...
Click to collapse
OK I've found the file you're talking about and it doesn't have that line in it so I need to add it. I can't easily get access to a computer right now to run the command line on my phone so i have been trying to use the terminal emulator instead. It says I doesn't have a text editor...is there a way to edit via the emulator? Do you wkno which commands to use?
Thanks again
Yep, still having a minor issue with this. I have added the line suggested and I have cleared my cache yet I still get periodic prompts to install the update. I'm not really keen on doing so. Can anyone else suggest a way to stop the (weekly) prompts?
Thanks
Welcome
I wrote this post to help people get their Archos g9 tablet running custom roms. If you have any improvement ideas, please post them so I can make this better source of information.
List of content:
Post 1
What is recovery
What is SDE and how to install it
-Also SDE for 4.0.25
List of most commonly used roms
How to install custom roms
How to install offical rom
How to multiboot android 4.0 based roms
Installing 3G stick and Huawei modems support.
Post 2
Change symlinks/binds.
Installing ADB
Installing SuperCharger
Installing Chainfire3D
But why?
FAQ
Useful links
What is recoveryYou can boot to recovery menu by holding volume- while booting your device. From recovery meny you can calibrate your touchscreen, wipe data and do this kind of stuff. Installing SDE creates new entry to recovery menu, called Special Developers Edition. There you can remove android kernel, flash new, export hdd and data. In recovery move up and down with volume + and -. Select by pressing power button
What is SDE and how to install itSDE is shortened word from Special Developers Edition. After SDE is installed, your tablet is able to boot to official rom, recovery, and SDE rom. Most of the roms advice you to use "Remove android kernel" from SDE before you install kernel. When you remove your android kernel from there and install kernel from custom rom, your archos boots directly to custom rom. If you don't delete it, your device boots to official, but keeping volume - while booting gives you change to boot to SDE.
There are 3 guides how to install SDE. Official SDE watermarks your device for archos (there is no watermark on screen ), so they can detect you have installed SDE in some point. It stays even if you remove SDE. Official way is more safe. Also, it removes "only" software warranty. If your devices powerbutton, Usb-port or etc brokes, you can still send it to warranty. Link to official SDE install guide. Big thanks for Shano56.
Then there is unofficial, a bit more dangerous method. It doesn't watermark your device, but is more complicated. Guide tells that it's outdated, but it worked for me. I used official 4.0.4 version while installing. Link to the guide. Big thanks to Shano56.
4.0.25 Guide, by surdu_petru
surdu_petru said:
Hi !
I uninstalled SDE by mistake yesterday !
...so, you can enable (install) unofficially SDE following this path ( work 100% on firmware 4.0.25 ) :
On your tablet :
check on Settings-> Developer options -> USB debugging on !
connect USB cable ( PC to tablet )
On your PC :
> adb push 1 /data/local
> adb push 2 /data/local
> adb shell
$ chmod 0755 /data/local/*
$ ./data/local/1
$ exit
> adb reboot
> adb shell
$ ./data/local/2
$ exit
> adb reboot
> adb push zimage /data/local/tmp
> adb push initrd.cpio.lzma /data/local/tmp
> adb push abcbox /data/local/tmp
> adb shell chmod 755 /data/local/tmp/abcbox
> adb shell /data/local/tmp/abcbox kd_flasher -k /data/local/tmp/zimage -i /data/local/tmp/initrd.cpio.lzma
( now you have installed unofficially SDE ! )
Flash Root version or other Custom Rom :
> adb reboot
> adb shell rm /data/local.prop
> adb push archos.ext4(.update) /mnt/storage
Go to SDE -> ( check "Reboot" on power off menu , and after a while press & keep volume down until you see SDE menu !)
Go to Recovery System -> Developer Edition Menu -> Remove Android Kernel -> I Undestand -> OK -> Developer Edition Menu -> Flash Kernel & Initramfs -> copy here zImage and initramfs.cpio.lzo appropriate archos.ext4(.update) -> OK -> wait to boot !
Now you have Rot version installed !
Here you will find the necessary files : Enable_SDE.zip
Click to expand...
Click to collapse
List of most commonly used romsThese roms are most commonly used. Most of them are still being developed. I also included link to rooted official honeycomb, because some people have better touchscreen responsibility with it.
ParanoidAndroid 3
Cyanogenmod 10, 4.2 mockup
Cyanogenmod 10
AOKP ROM
[email protected]
Clean_Slim&Fast(Based on official 4.0.25!)
Ubuntu. This requires special kernel, which is compatible with official android 4.0.4Overclockable stock rom
Early CM9
Stock ICS rom with root & busybox
Stock honeycomb with root. (FYI, kernel requires renaming while installing)
How to install custom romsCustom roms have different installing methods, but basic idea is same. You move image file with specified name to specified location.
When coming from stock rom or whengoing to stock rom:
CyanogenMod 10, AOKP, CyanogenMod 9
surdu_petru said:
Installation : Now should be work on all devices Gen9 !!!
...connect USB cable to PC and ( you need to use a Rom with root access ) :
> adb shell
# stop
# rm -rf data/*
# mkdir data/local
# mkdir data/media
# exit
> adb push archos.ext4 /mnt/storage ( need to wait about ~150 seconds ) !
> at the same time do : adb reboot & press and keep volume down ; in SDE -> DEM-> Remove Android Kernel ( if exist ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.gz -> OK -> wait to reboot !
Click to expand...
Click to collapse
[email protected], Ubuntu, Root 4.0.7 Clean_Slim&Fast
surdu_petru said:
Install :
- copy archos.ext4.update(archos.ext4 in case of Clean_Slim&Fast) in /mnt/storage/ , you can use this command > adb push archos.ext4.update(remove .update if Clean_Slim&Fast) /mnt/storage/
- go to SDE -> Developer Edition Menu -> ( Remove Android Kernel if available ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.lzo -> OK! -> wait to reboot .....
- after everything was installed - please reboot your device !
Click to expand...
Click to collapse
Honeycomb
Install like Cyanogenmod and AOKP and others, but rename initramfs.cpio.gz to initramfs.cpio.lzo
How to install official romDownload official 4.0.7 rom from here.
Now boot to recovery (hold volume- while booting) and choose update firmware.
Now there should be noew drive in your pc. Drop the downloaded firmware_archos_it4.aos to there and press ok in recovery. Keep usb plugged in while installing. It should take around 30 seconds to 2 minutes. Now choose ok again. your tablet should now reboot to stock rom.
4.0.24 Official is owrking on some devices, but because it won't work on all, i won't cover it here(yet)
How to multiboot android 4.0 based romsInstall modified initfram from this topic. Use the zimage from the rom you want to multiboot. AFAIK you can multiboot with following combos:
[email protected], Ubuntu (download newer kernel from later pages.), Root 4.0.7
and
AOKP, CyanogenMod 9.
You cant use [email protected] and AOKP because they do not use same kind of data. That means that after you have run first rom, the second will bootloop. That is also why it requires wiping data when changing from stock to aokp and vise versa.
Detailed:
Download dmenu-0.3a.zip, and extract initframfs to desktop. Then download [email protected] and stock 4.0.7 rooted. Extract Image files and zimage from either one of the roms. Now just instal like described in earlier section, while using initframfs from multiboot and kernel from other rom.
Installing 3G stick and Huawei modems support.
Trevd made a package to add 3G stick and extra Huawei modems work for AOKP and generally all ICS ROMs. This guy is awesome because he also made some Huawei modems work.
trevd said:
Hi surdu_petru and AOKP fans.
Great work as always, It's not a rom i'll ever use but It's the first time I've loaded an AOKP Rom, I like notification layout, I'll be having that away for my own personal rom Anyway I was more just passing through and noticed 3G was not working yet. As seen as though that seems to be my speciality and preoccupation/addiction for the last 9 months I thought I do something to remedy that situation for you.
Here's an hotfile link to download the update [ 3g-archos-aopk.7z ] this should contain everything you need to get the Archos 3G Dongle, just for ****s and giggles as a extra bonus i've also included the huawei support file as well :good:
Installation:
From a command prompt / bash terminal
Code:
7z x 3g-archos-aopk.7z
adb push 3g /
adb shell reboot_into sde
extracting the 3g-archos-aopk.7z will give youu a 3g directory in you current directory, we then push the contents of the 3g directory to the root direcotry on the device. This operation is recursive.
Have Fun!
What follows is a detailed explanation of what files and modifications are required to add 3G support.
Archos 3G Stick
The changes / additions to add this functionality breaks down like this ; The following required binary's were on the device already:
** /lib/modules/hso.ko is insmod'd by the device specific init file /etc/init/init..rc
Code:
/lib/modules/hso.ko[B]**[/B]
/usr/bin/usb_modeswitch
/system/lib/libtcl-ril.so
/system/bin/rild
/system/bin/pppd
/system/xbin/chat
/etc/ppp/init_pppd_datakey
/etc/ppp/ip-up-datakey
/etc/ppp/ip-down-datakey
/etc/ppp/peers/datakey
/etc/chatscripts/datakey_start
/etc/chatscripts/datakey_stop
/etc/usb_modeswitch/1bbb_f000
The following required services were already defined in the device specific init.rc's located in /etc/init/init..rc ,
*** switch_ms_3g defined by /etc/init/init.archos.rc
Code:
service service switch_ms_to_3g[B]***[/B]
service pppd_secrets
service pppd_datakey
service ril-daemon
So what's missing? you may ask as this pretty much is everything that is needed by the Archos 3G Stick.
Standard Archos Roms use the UsbKeyManager.apk system service to start the switch_ms_to_3g and ril-daemon service's. I replace that with my own ueventd handling native service and add an additional to configuration file keep everything clean
Code:
/system/bin/hotplugd
/init.dongle.rc
I've added the following line to the top of the /init.rc
Code:
import init.dongle.rc
All that is left to do now is enable mobile networks on the rom. I used apktool to decompile the /system/framework/framework-res.apk and change the following values
res/values/bools.xml
Code:
true
true
res/values/arrays.xml
Code:
wifi,1,1,1,-1,true
mobile,0,0,0,-1,true
mobile_mms,2,0,2,60000,true
mobile_supl,3,0,2,60000,true
mobile_hipri,5,0,3,60000,true
mobile_fota,10,0,2,60000,true
mobile_ims,11,0,2,60000,true
mobile_cbs,12,0,2,60000,true
wifi_p2p,13,1,0,-1,true
"1,1"
"0,1"
"7,1"
"9,1"
res/values/strings.xml
Code:
ppp1
Huawei Support
The extend this functionality further I added the following files
Code:
/etc/ppp/init_pppd_gprs
/etc/ppp/ip-up-gprs
/etc/ppp/ip-down-gprs
/etc/ppp/peers/gprs
/etc/chatscripts/gprs_start
/etc/chatscripts/gprs_stop
/etc/usb_modeswitch/ [ numerous configurations files ]
/lib/modules/usb_wwan.ko
/lib/modules/option.ko
/system/lib/libhuaweigeneric-ril.so
We also need to chmod 6755 /system/bin/pppd but that is handled/checked in the /init.dongle.rc so there is no need to do that manually
Click to expand...
Click to collapse
Change symlinks/bindsTrevd wrote guide to let people know how to change binds. That way you can move large folders, like Gameloft games and navigator files to ExternalSD, saving InternalSD space.
trevd said:
If you after freeing up space, it is still possible with a bit of hacking voodoo . There are 2 ways I know of in fact.
METHOD 1 - SDCARD SERVICE
you can point the /storage ( /mnt/storage in reality ) to any directory you like. I've currently got mine pointing to an multi partitioned external 32gb sdcard. :0 all you need to do is change the sdcard service in the /etc/init/init.A101S.rc,
Currently it mounts /data/media to /mnt/storage, if you have an external sdcard card handy, try this as a quick and dirty test
From a terminal emulator or adb shell run the following commands
Code:
stop sdcard ;
sdcard /mnt/sdcard 1000 1015 &
ls /storage
You will now see that the external sdcard can be access through /storage. to kill the test run
Code:
pkill -9 sdcard
start sdcard
Everything should be back to normal. As I mentioned to make a more permanent change edit the following line in the /etc/init/init.A101S.rc
Code:
service sdcard /system/bin/sdcard /data/media 1000 1015
METHOD 2 - MOUNT BIND
The other, perhaps more straight forward method uses the bind argument on the mount to command to "mount an already visible filesystem elsewhere" .
In the example I'll bind the external sdcard to a directory in the internal storage
use the terminal emulator or adb once again to execute the following commands
Code:
mkdir /storage/sdcard
mount --bind /mnt/sdcard /storage/sdcard
To make this more parmanent, I would probably create a wrapper shell script for the sdcard service to make sure it all gets started together, that's just my preference, As we say in trade ( or maybe it's a saying i've just made up :silly: ) ; "there's more than one way to mount a file system!"
In Summary: I would go with method 2 as this effectively achieves the desired effect off "symlinking" an external directory in the /storage
Cheers
Click to expand...
Click to collapse
Installing ADBADB comes from word android development bridge, and it allows you to debug, move files and get shell access to your tablet.
Archos said:
First make sure you are running the latest ARCHOS firmware. Connecting by this method will give you user shell privileges. Learn more to know how to use ADB on Windows, Mac or Linux operating system:
Go to the Android SDK page and download the latest SDK for your operating system.
For Windows users only: Install the Archos ADB USB Driver for Windows. The driver is available at the ARCHOS support ftp (ftp://support.archos.com). Instructions how to install the driver are available at USB Driver for Windows site on Android Developers.
Add Archos vendor ID (0x0e79) to adb_usb.ini in .android folder in your home directory:
Windows: echo 0x0e79 >> "%USERPROFILE%\.android\adb_usb.ini"
Macos: echo "0x0e79" >> ~/.android/adb_usb.ini
Linux: echo "0x0e79" >> ~/.android/adb_usb.ini
For Linux users only: You need to add a udev rule if ADB only works as root:
Create a file /etc/udev/rules.d/51-android.rules that contains the following lines:
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device",
ENV{PRODUCT}=="e79/*", MODE="0666"
SUBSYSTEM=="usb", SYSFS{idVendor}=="e79", MODE="0666"
Make the rule known to udev with the following command:
udevadm control --reload-rules (or udevcontrol reload_rules on older systems)
Click to expand...
Click to collapse
Running adb from anywhere
steviewevie said:
We need to update your Path variable. This lets you run adb on your PC from a command window no matter which directory you are in (which makes things a lot easier). If you don't setup your Path, then every time you want to run adb, you will either have to type the whole long pathname where you put adb, or cd to where you've put adb and run it from there (which could be inconvenient if you are transferring files to/from your phone).
On your PC, right-click on "My Computer" and select "Properties". (on Vista, click on "Change Settings"). Go to the "Advanced" tab, then select "Environment Variables". Find the "Path" variable in the list of variables that it shows (you might need to scroll), and then double-click on that entry to edit it. Add the full path of the "tools" and "platform-tools" folders of the SDK to your path. e.g. if the SDK has been installed in "c:\Program Files\android-sdk-windows", then add to your Path "c:\Program Files\android-sdk-windows\tools;c:\Program Files\android-sdk-windows\platform-tools" (Please Note - don't put any spaces between the semi-colon and pathname, otherwise it won't work !)
Click to expand...
Click to collapse
sources:Archos, steviewevie
Installing SuperchargerSupercharger is a multiscript which makes the tablet work much better. Its created by Zeppelinrox, and its official topic is here. We are using also script manager in this guide. That way we can make MinFrees and OOM apply.
In this guide we'll use Apex launcher which is moved to /system/app for our default launcher.
We are also using adb to configure and run Supercharger.
Because stock launcher is odexed and i am not writing how to deodex, we are not using it.
First make sure apex is your default launcher. This can be tested by pressing home button in homescreen.
If it show mini previews of your homescreens, apex is your default launcher.
Now lets begin:
go to here and download newest file. At
the time of writing, it is Update 9_RC11_test6. Move it to your adb folder.
Then open commandline. This can be opened with windowskey + R and writing cmd. Navigate
to adb folder using cd command. I have made adb to run from anywhere, so i just navigate to the downloaded file.
Now use command "adb push v6* /mnt/sdcard" then use command "adb shell". Now you should have
shell access to your tablet. Now do following
su
cd /mnt/sdcard
sh V6* /remember capital V)
Supercharger script should open now. After presentation, script should print after telling your busybox version
"com.anddoes.launcher is the home launcher!" Now continue install. Supercharger will tell you everything you need to know.
So just follow the instructions. After choosing kernel tweak, you get bunch of permission denieds.
We can't help them, so lets just continue.I recommend on using all the tweaks that you can,
but it is your choise do you want to use or not. After all the selections are selected and your in
driver panel, choose number 32. It'll reboot your tablet and wipe dalvik. When the tablet has booted, lets run supercharger script again.
So write these again:
su
cd /mnt/sdcard
sh V6_Super*
After getting to drivers panel, you notice that minfrees are not in effect, and neither is OOM Grouping Fix BUT if they are, you can ignore this step..
Install script manager from market and open it. Give it root permissions and navigate to /system/etc/init.d
press SS99SuperCharger to open its settings. Now press the Su button and then Boot button.
Now press save, and then click it's name which appers to right. Then press back button and reboot.
Now Minfrees should work, and OOM too.
Now you can run 22 if you want to try it. Supercharger is now fully working.
Installing Chainfire3D
Chainfire said:
Chainfire3D is an intermediary OpenGL driver. What does that mean? It means that Chainfire3D sits between your apps and the graphics drivers, and can intercept and/or change commands between the two. It has some built-in functions, and can be further extended with plugins to provide extra functionality.
Click to expand...
Click to collapse
It is very useful for running gameloft games and other games too. I recommend buying it. There are some plugin for it, but i'm not going to tell you about it now.Play store link.
After downloading it, open it and choose "Chainfire3D Driver" and from there "install". Then confirm it and tablet should reboot. Now reopen it and choose "Default opengl setting". From there you can tweak 3D performance if some games lag. Also, if you install plugin, there you can apply them. I personally use "reduce texture quality".
But why?
This section is to point few reason why to follow these guides. Lets begin:
SDE
Well, you should install this if you want to customize your tablet. If your happy with your tablet running stock, you don't need this, or any other guides.
Custom roms/kernels
Custom roms allow you to use root, they make your tablet faster and add extra functionality. This "functionality" includes: Overclock, run init.d scripts, enable both cores with all governors, root and themes. The benefits are not limited to these, but I could name this quickly. If you wan't to try something which is close to stock, but still has root and some custom functionalities, i would recommend deodexed 4.0.7, or [email protected]
Install official roms
These roms do not require SDE, but will not include root or anything fun . Updating your official rom has many benefits. They include fixes and boost your tablets performance.
Multiboot
Multibooting allows you to have 2 or more roms, which you can choose which to boot on startup. I would recommend this if you want to test functions with root, but still have "backup plan" if testing rom renders unbootable.
3G support
Basicly this allowes some extra huawei 3G sticks to work. There is no list of working stick, you just have to try and hope.
Change symlinks/binds
These allow you to "move" eg. gameloft games to external sd, and allow you to acces your externalsd via internalsd folder.. That way your gamedata does not eat the valuable internalsd space.
ADB
You need this to transfer rom to your tablet. It is also required when you sent logcat reports to help remove bugs.
SuperCharger
This makes your tablet work more fluid. I personally install supercharger to all my android devices. It removes need for task killer, and makes the device work better. Everyone has different results, and it costs only time to install, so i would recommend installing it.
Chainfire3D
This tool allows you to play games made for other GPUs and it can tweak application graphics. You can make the game look worse, but run better or adjust the grphics for a bit higher, so the game looks nicer.
FAQ[/CENTER]
These questions and answers are collected from various sources.
surdu_petru said:
How to activate second core for all govenors in surdu_petrus roms?
To activate the second core, you need the following steps :
- copy /system/S1tweak in /system/etc/init.d/ or ( > adb shell ; # cp /system/S1tweak /system/etc/init.d ; # exit )
- open No-frills CPU Control :
- choose the desired Governor ( but not hotplug ) !
- choose the desired frequency , but not overclocked ! ( when the device will boot - will open with the selected frequency , so please choose max. frequency = your max. stock frequency )
- check "Apply on boot"
- check "Applay"
- check allow if superuser asked permission
- reboot your device !
- Now , both core will be used in any selected Governor ( other than hotplug ! ).
Click to expand...
Click to collapse
What modems does Trevds mod support?
trevd said:
The theoretical list of supportted devices come from those devices supportted by usb_wwan and option kernelp drivers.
Click to expand...
Click to collapse
Shano56 said:
Can I just drag the .zip file to the RAMDISK that appears when I flash zImage and initramfs?
No! Archos recovery cannot read ZIP files. You must first EXTRACT, then copy the contents of the extracted folder. NOT the folder itself. This means you will have two files on the RAMDISK, and no additional folders. If you don't know what a RAMDISK is, try Google or Wikipedia. If you get stuck in a boot loop because you forgot to extract archos.update.ext4 or drive.zip, you must follow the instructions below.
Help! I am stuck in a bootloop! Archos splash screen appears and keeps rebooting. I messed up when I was rooting, and now android will not boot! I accidentally formatted my device, and now I cannot boot into android.
This is a simple mistake and in 99% of cases it is easy to fix. Follow these steps:
Step 1: Download official Archos G9 firmware for ALL G9 tablets (aos file) HERE
Step 2: Boot into recovery turning your device off and then holding volume down + power at the same time
Step 3: Choose "Update Firmware"
Step 4: Connect USB cable to computer and tablet
Step 5: A removable device should appear (RAMDISK), copy the file you just download straight to that drive
Step 6: Press the power button once the file is done copying. DO NOT UNPLUG your device until it has finished updating and has booted back into android.
If you did not format your tablet or delete any personal media, your files should be uneffected.
Will I lose SDE menu if I update my tablet with official AOS or OTA update
As of the latest update (4.0.6) no official update from Archos has removed SDE menu. You should be fine, and your SDE menu should remain untouched.
Click to expand...
Click to collapse
[/quote]
Useful linksSome link i consider useful are here:
G9 101 16GB 1.5GHz Teardown! (Lots of Images)
XBMC for android
Want faster GPS? Follow this guide
3th just i remember something to add. Comment and give me some feedback. It helps me to make this topic useful for beginners, and for those who seek info.
I meant to edit first post... well, this works as 4th reserved then.
Hi there!
You have been busy! Thanks for kind words, Just an heads up really, you might want to update your post as I deleted the usb-modem-binary-redist github repo yesterday as it was a bit too clever for it's own good and I think a bit of abuse/misuse of the concept branching! Just because you can, doesn't always mean you should LOL, with that in mind I'd probably advise against linking to my github repos as they don't stay static for very long. I generally leave the hotfile links up "forever" so link away with them.
The Information and files included in the new AOKP post about 3G Dongles should be good across all ICS roms. Finally allow me to throw out this mini guide I wrote a while back which explains an "app-free" method of freeing up space, I noticed there been a bit of discussion about it, Using an app just seem like overkill, but that's just me I suppose.
Anyway good work. :good:
trevd said:
Hi there!
You have been busy! Thanks for kind words, Just an heads up really, you might want to update your post as I deleted the usb-modem-binary-redist github repo yesterday as it was a bit too clever for it's own good and I think a bit of abuse/misuse of the concept branching! Just because you can, doesn't always mean you should LOL, with that in mind I'd probably advise against linking to my github repos as they don't stay static for very long. I generally leave the hotfile links up "forever" so link away with them.
The Information and files included in the new AOKP post about 3G Dongles should be good across all ICS roms. Finally allow me to throw out this mini guide I wrote a while back which explains an "app-free" method of freeing up space, I noticed there been a bit of discussion about it, Using an app just seem like overkill, but that's just me I suppose.
Anyway good work. :good:
Click to expand...
Click to collapse
Thanks for the feedback.
I removed the part which had github link, and modified the AOKP section to tell it works with all ICS ROMs.
I'll included your mini guide. I might even have some use for it myself...
Sent from my GT-I9100 using xda app-developers app
help me for multi boot ubuntu ics bleuv03
hello I want to know is it possible to bleuv03 ics and multi boot with ubuntu and it is possible that what zImage and iniframts I should use.
desoler for my english I'm french and I go through a translator thank you.
muti642 said:
hello I want to know is it possible to bleuv03 ics and multi boot with ubuntu and it is possible that what zImage and iniframts I should use.
desoler for my english I'm french and I go through a translator thank you.
Click to expand...
Click to collapse
Download zimage, initfram and Ubuntu image from
http://forum.xda-developers.com/showthread.php?p=26000199
There is a high chance that touchscreen will not work if you have 101 G9 model in Ubuntu. You can still use USB OTG devices like mouse normally.
Sent from my GT-I9100 using xda app-developers app
julle131 said:
Download zimage, initfram and Ubuntu image from
http://forum.xda-developers.com/showthread.php?p=26000199
There is a high chance that touchscreen will not work if you have 101 G9 model in Ubuntu. You can still use USB OTG devices like mouse normally.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
thank you for answered. j've already managed to install ubuntu and I had no problem touch by cons I Can not get a dual boot ubuntu and bleuv03 ics. I shall therefore understands the multi boot flash I then I put two images but in the memory of the tablet and then I flash the kernel you gave me quote above and I should be able to boot on 2 rom and bleuv03 ubuntu?
muti642 said:
thank you for answered. j've already managed to install ubuntu and I had no problem touch by cons I Can not get a dual boot ubuntu and bleuv03 ics. I shall therefore understands the multi boot flash I then I put two images but in the memory of the tablet and then I flash the kernel you gave me quote above and I should be able to boot on 2 rom and bleuv03 ubuntu?
Click to expand...
Click to collapse
Download the this kernel https://docs.google.com/file/d/0BxgjsI4pMALheHZoVUdIYnVTN28/edit
It can dualboot [email protected] v03. If the ubuntu does not boot after flashing it, download this ubuntu image:
https://docs.google.com/file/d/0BxgjsI4pMALhVl9kek9SSFpKb2M/edit
THX
julle131 said:
Download the this kernel https://docs.google.com/file/d/0BxgjsI4pMALheHZoVUdIYnVTN28/edit
It can dualboot [email protected] v03. If the ubuntu does not boot after flashing it, download this ubuntu image:
https://docs.google.com/file/d/0BxgjsI4pMALhVl9kek9SSFpKb2M/edit
Click to expand...
Click to collapse
Thank you thanks you it works well, I do not use the right kernel or the good image of ubuntu. ps: the touchscreen does not work but using the OTG is perfect.
thank you again julie :good:
sorry for ignorance but for root i need to have adb sdk for do this steps??
"- copy archos.ext4.update to /mnt/storage/ , you can use this command > adb push archos.ext4.update /mnt/storage/
- go to SDE -> Developer Edition Menu ->( Remove Android Kernel if available ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.lzo -> OK! -> wait to reboot .....
- the first boot may be longer ! "
If my archos is untoot how i use this comand? with adb sdk ?!
solrakk6 said:
sorry for ignorance but for root i need to have adb sdk for do this steps??
"- copy archos.ext4.update to /mnt/storage/ , you can use this command > adb push archos.ext4.update /mnt/storage/
- go to SDE -> Developer Edition Menu ->( Remove Android Kernel if available ) -> Flash Kernel & Initramfs -> copy here zImage & initramfs.cpio.lzo -> OK! -> wait to reboot .....
- the first boot may be longer ! "
If my archos is untoot how i use this comand? with adb sdk ?!
Click to expand...
Click to collapse
Yes, you must use adb. I assume your "untoot" means unrooted. You use cd command to navigate to your adb folder and from there to platform-tools. Also drop archos.ext4.update to there. Then use the adb command to move the file. Moving file to that location does not require root.
Sent from my GT-I9100 using xda app-developers app
Archos G9 101 HD
Hi Surdu,
I tried to update after SDE install and then accidentally dont know what happened have lost android on my tablet G9 101 HD. I cant see my hd on pc and is not booting but only can see the rom image which appears on boot without animation. How can I transfer the update archos.ext4 into Internal Storage without seeing the drive on PC win 7. I have made mistake in steps may be.
Please help.
hondacity said:
Hi Surdu,
I tried to update after SDE install and then accidentally dont know what happened have lost android on my tablet G9 101 HD. I cant see my hd on pc and is not booting but only can see the rom image which appears on boot without animation. How can I transfer the update archos.ext4 into Internal Storage without seeing the drive on PC win 7. I have made mistake in steps may be.
Please help.
Click to expand...
Click to collapse
Go to the recovery menu, choose update firmware. When it prompts you to connect tablet to pc, cobbect it, but to different usb port than last time. That should cause the pc to reinstall usb drivers for the tablet.
Sent from my GT-I9100 using xda app-developers app
Archos G9 101 HD
julle131 said:
Go to the recovery menu, choose update firmware. When it prompts you to connect tablet to pc, cobbect it, but to different usb port than last time. That should cause the pc to reinstall usb drivers for the tablet.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks, for so fast reply Dear...
I did the same as you advised and a drive with name ending with "REC" with a capacity of 299 MB appeared. I tried to copy the Surdu's Deoedex update but it has more weight in MBS about 390. So it could not. I tried original Archos ROM with weight of 186 MB and it copied. Started update but returned with an error "Update failed: (221)".....
Please advise.
Note: I also tried in SDE menu to export data drive and got a drive 1.48 GB which I formated from win 7 and succeded in copying Stock and Surdu's ROMs one by one but always failed to get android and it always say failed update. Still get unanimated Archos logo on startup with no further bootup.
hondacity said:
Thanks, for so fast reply Dear...
I did the same as you advised and a drive with name ending with "REC" with a capacity of 299 MB appeared. I tried to copy the Surdu's Deoedex update but it has more weight in MBS about 390. So it could not. I tried original Archos ROM with weight of 186 MB and it copied. Started update but returned with an error "Update failed: (221)".....
Please advise.
Note: I also tried in SDE menu to export data drive and got a drive 1.48 GB which I formated from win 7 and succeded in copying Stock and Surdu's ROMs one by one but always failed to get android and it always say failed update. Still get unanimated Archos logo on startup with no further bootup.
Click to expand...
Click to collapse
Okay... So you have sde installed? Good. First, let's get the official firmware working. Download the latest official ROM from archos:
http://update.archos.com/9/gen9/gen9_4.0.26/firmware_archos_it4.aos
Drop this to the 300mb partition called REC. Then press power and let it install.
Now follow the install guide o. The ROM you want to install
Sent from my GT-I9100 using xda app-developers app
Archos G9 101 HD
julle131 said:
Okay... So you have sde installed? Good. First, let's get the official firmware working. Download the latest official ROM from archos:
Drop this to the 300mb partition called REC. Then press power and let it install.
Now follow the install guide o. The ROM you want to install
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks Julle..But Now I understand that official ROM is not installing because of unofficial kernel flash I have already installed and had flushed original one. I think if I get original kernel then I can arrive to original Android ICS which you have mentioned. Please advise if you have any address of original kernel for "firmware_archos_it4.aos".
THANKS and Best Regards...
Further to my above thread...I found the stock kernel and flashed it but still after installing kernel and then original firmware, its giving same error of update failed (221).
Please advise if any remedy you prefer.
Regards...
Hi Julle,
Sorry too many threads from me but very much annoyed but sure thanks Dear for your kind help.
On export of HDD from "Repair system" menu...>>>> A drive appeared in PC but not opening as it says " Insert disk into drive". I think it is the problem which is preventing from installing the AOS file to run Android.
Please advise.
Regards,
hondacity said:
Thanks Julle..But Now I understand that official ROM is not installing because of unofficial kernel flash I have already installed and had flushed original one. I think if I get original kernel then I can arrive to original Android ICS which you have mentioned. Please advise if you have any address of original kernel for "firmware_archos_it4.aos".
THANKS and Best Regards...
Further to my above thread...I found the stock kernel and flashed it but still after installing kernel and then original firmware, its giving same error of update failed (221).
Please advise if any remedy you prefer.
Regards...
Hi Julle,
Sorry too many threads from me but very much annoyed but sure thanks Dear for your kind help.
On export of HDD from "Repair system" menu...>>>> A drive appeared in PC but not opening as it says " Insert disk into drive". I think it is the problem which is preventing from installing the AOS file to run Android.
Please advise.
Regards,
Click to expand...
Click to collapse
To install the update I linked, you shouldn't need any kernel changes. Removing kernel from SDE removes the official kernel, but that does not prevent installing official update. Also installing custom kernel will not prevent installing official rom.
I just do not understand why you get the 221 error as most of the people get it when that have incorrect file there or already have newer stock ROM installed. It is possible that your windows format broke it, because windows formats it to wrong format. You should never format any other than sdcards in windows. You could try the format system in recovery and choosing reformat device. After that install the official update I linked.
Sent from my GT-I9100 using xda app-developers app
Archos G9 101 HD
julle131 said:
To install the update I linked, you shouldn't need any kernel changes. Removing kernel from SDE removes the official kernel, but that does not prevent installing official update. Also installing custom kernel will not prevent installing official rom.
I just do not understand why you get the 221 error as most of the people get it when that have incorrect file there or already have newer stock ROM installed. It is possible that your windows format broke it, because windows formats it to wrong format. You should never format any other than sdcards in windows. You could try the format system in recovery and choosing reformat device. After that install the official update I linked.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks again Dear,
I applied same as you say but ending on same 221 error. Any thoughts please.
Best regards.:crying:
Rooting Ascend P1 U9200 B315 EUI1.5 JB v4.1.1
----------------------------------------------------------------------------
Anyone wanting to root there Ascend P1 U9200 phone after the new firmware update, here are the files, and info you need, to do so...
First off, plug UR phone in switch it on and let Windows search for the driver, Then click "Let me choose..." or "browse for it..." or similar. Then select "Let me choose which driver to install", then click "list of drivers" or similar, Then click the one near the top that has adb or similar in the title, it don't matter if you choose the wrong one, it just means it wont connect and you'll have to redo this part again and pick a different driver.
Remember!! You MUST run these commands as Administrator.
1. Download the files below, extract them to a folder, preferably one without any spaces in the path, i.e.. C:\U9200Root\ should do perfect.
3. Right Click the "Click-To-Root-U9200.bat" file and under compatibility options click run as administrator or the like.
4. Run (Double Click) the Click-To-Root-U9200.bat (As Administrator!) (or right-click then, "run as administrator...")
4. Reboot your fone and click yes on your fone to install SuperUser.
that's it, your rooted
for those wanting to do the commands there self...
1. Download & extract the files to C:\U9200Root\
2. In the CLI type: "C:\U9200Root\adb reboot bootloader"
3. Then "boot TWRP.img"
4. Then Restart your fone and choose yes to install SuperUser
PS if you've not got much space left in your system partition you may have to delete something from /system/app/ to make space for the SuperUser files.
REMEMBER the space reported on your fone by android is the space on your data partition/memory & sd card and not the system partition!
You can check how much system data etc space you have left from terminal if u have it installed, or on the TWRP recovery which you will have just installed.To do this, Reboot the fone holding the Vol. Up Button, click on advanced then terminal then type "df -h" without quotes if system partition is less than say 10-20mb free then delete maybe, uneeded languages?, chrome.apk?, GSM_Maps.apk? or the like, then reinstall them to the /data/app part later. Since many of these apks get updated and the old ones left undeleted in /system/app/ anyways, I always move the system apks updates from /data/app to /system/app/, makes things a lot tidier and saves a lot of space both in /data/app and /system by not having two of every apk file youve ever updated just remember to copy the libs to /system/lib(s)
Anyways hope I helped someone with this...
cheers John -G-
PS Please Click on Thanks to Thank me as i have 0 in my Thanks Meter lol
PS I moved this to here as it was added to the end of an old un-related topic sooo.... John -G-
ask me any questions you have, do you like my multi color dos txt in my bat file (Coders will get it,its unusual and very hard to do with many colors )
sorry for been so long but i never knew no one would move it or stick it ???? and i was in jail for a while there so,,,
...Good Luck Rooting/Moding!!!
Software LOL
Heres The Software LOL..........
here all my drivers
the drivers------->>>>
shall stonri
sonnettie said:
the drivers------->>>>
Click to expand...
Click to collapse
Where can I find blaze driver?
Hi
After adb reboot bootloader you can also install CWM with fastboot :
fastboot flash recovery clockworkmod.XXXX.img
With CWM you can backup your phone (always a good idea )
After rebooted in CWM install SU with any zip file (ex : SU___Busybox_1.20.2_Flashable.zip )
phoenixpb said:
Hi
After adb reboot bootloader you can also install CWM with fastboot :
fastboot flash recovery clockworkmod.XXXX.img
With CWM you can backup your phone (always a good idea )
After rebooted in CWM install SU with any zip file (ex : SU___Busybox_1.20.2_Flashable.zip )
Click to expand...
Click to collapse
Worked like a charm.
It's what i did with my phone, ans cwm saved me a couple of times
Envoyé depuis mon U9200 avec Tapatalk 4
How to remove TWRP...? I want to update U9200-EM-UMTS-V100R00G411D00B336....thanx in advance.
Stuck
My U9200 is just stuck on the HUAWEI logo when you boot it...
And the cmd application just keeps saying < waiting for device >
Any help is appreciated...
with B336 this method doesn't work.
EDIT:
The problem is not in TWRP or CWM; the problem is that there is not enough space in folder /system/app.
From TWRP I went to "Advanced" and then "file manager"; here from the /system/app I deleted all the languages other than Italian-pack (my language), chrome.apk and gsm-map.apk. Then I flashed SU_flashable and after boot-up SU was finally installed.
It seems that the difficulty of obtaining root permissions in all stock roms from b105 onwards is precisely linked to the lack of space in the / system / app.
I hope to be helpful to those who find themselves with the same problem.
Ricolaa said:
My U9200 is just stuck on the HUAWEI logo when you boot it...
And the cmd application just keeps saying < waiting for device >
Any help is appreciated...
Click to expand...
Click to collapse
you need the fastboot drivers or install hisuite from hauwie
where what is a Blaze driver? It doesn't work!! It asks for the blaze driver which I cannot seem to find!!!!
How can I go back to the stock firmware from CWM ignore if I am posting on a wrong thread
cVinu said:
How can I go back to the stock firmware from CWM ignore if I am posting on a wrong thread
Click to expand...
Click to collapse
Just downloaded the stock rom and flash it with your recovery.
Sent from my U9200 using xda app-developers app
awaisthebest said:
Just downloaded the stock rom and flash it with your recovery.
Sent from my U9200 using xda app-developers app
Click to expand...
Click to collapse
I recovered stock recovery and flash with B123 but showing error msg installation failed!!!!!!
hi im having some issues trying to get the SU, i cannot erase the .apk contained in /system/app in order to gain more space.
- i cannot see any folder inside of system folder just one called /system/bin
i really dont know if that really would be the problem because i checked with "df" command and i see everything righ
but when i reboot even if i swipe to accept the configuration or install de SU.zip archive anything happend.
i will appreciate your help, thx!!
kannox said:
hi im having some issues trying to get the SU, i cannot erase the .apk contained in /system/app in order to gain more space.
- i cannot see any folder inside of system folder just one called /system/bin
i really dont know if that really would be the problem because i checked with "df" command and i see everything righ
but when i reboot even if i swipe to accept the configuration or install de SU.zip archive anything happend.
i will appreciate your help, thx!!
Click to expand...
Click to collapse
Sounds like you need to go to [mount] the check the unchecked boxes well at least [system]
sonnettie said:
Sounds like you need to go to [mount] the check the unchecked boxes well at least [system]
Click to expand...
Click to collapse
Done! Thank you all!
free space
please tell me how i free space to root android because it stuck in hawei logo it said you cant delete files tnx lot sorry for my bad english!
Thanks!
Thanks!
Worked on Linux:
Code:
> sudo apt-get install android-tools-fastboot android-tools-adb
> adb reboot bootloader
> sudo fastboot flash recovery TWRP.img
> sudo fastboot boot TWRP.img