I recently installed jellybomb domination version 3 and the cell signal isnt that good is there anything i can do to help me get better service? Do I change the kernel and if I do what kernel can i use? I tried to download a new modem but it bricked my phone ... help me get better signal please.
O. K
What model or baseband are you on?
Why you said it brick your device.
MIUI Jellybean 2.8.31 ALPHA
I've been there. Step one, slow down and take a deep breath. Step two, see if this thread will help you. Take your time and read it all.
http://forum.xda-developers.com/showthread.php?t=1766308
redline57 said:
O. K
What model or baseband are you on?
Why you said it brick your device.
MIUI Jellybean 2.8.31 ALPHA
Click to expand...
Click to collapse
im on jellybomb dom version 3.0 LG8 the baseband is L710VPLEN....phone model is SPH-L710...when i tried to install a modem the phone was stuck and I couldnt do anything had to go to sprint after I flashed back to stock...
Upgrade to jellybomb 4.0, he uses wicked sensations rom as a base now. Much better than version 3.0.
bernmed2005 said:
im on jellybomb dom version 3.0 LG8 the baseband is L710VPLEN....phone model is SPH-L710...when i tried to install a modem the phone was stuck and I couldnt do anything had to go to sprint after I flashed back to stock...
Click to expand...
Click to collapse
Related
Hi guys, I got my glide sent over from the u.s (I'm in the u.k) a few months ago, it was already rooted for me, and as such, I'm wondering what rom and kernal I'm using?
The details I can retreive are:
Android ver 4.0.4
Baseband : I927RUXKJ5
Kernal : 3.1.10-I927UCLG9-CL970642
Build. : IMM67D
Does this give anyone any clues?
Is this the stock ota ics update from at&t?
The phone is a rojers one.
Stock kernal?
Just wondering as was thinking about flashing the litekernal, and not sure if it would work ok with the rom I am using, as this rom is very stable..
Btw cwm is installed etc..
Thanks..
James.
jmpcrx said:
Hi guys, I got my glide sent over from the u.s (I'm in the u.k) a few months ago, it was already rooted for me, and as such, I'm wondering what rom and kernal I'm using?
The details I can retreive are:
Android ver 4.0.4
Baseband : I927RUXKJ5
Kernal : 3.1.10-I927UCLG9-CL970642
Build. : IMM67D
Does this give anyone any clues?
Is this the stock ota ics update from at&t?
The phone is a rojers one.
Stock kernal?
Just wondering as was thinking about flashing the litekernal, and not sure if it would work ok with the rom I am using, as this rom is very stable..
Btw cwm is installed etc..
Thanks..
James.
Click to expand...
Click to collapse
Correct, that's the UCLG9 Samsung stock rom with stock kernel and you should have no problems installing the ICS version of litekernel.
kick buttowski said:
Correct, that's the UCLG9 Samsung stock rom with stock kernel and you should have no problems installing the ICS version of litekernel.
Click to expand...
Click to collapse
Cheers kick butt
First rom was slim bean
second was liquid smooth
Since it's happening on both, I know I'm doing something wrong
I just don't know what exactly it is.
Do the custom roms use different frequencies?
Would flashing a new modem(i know nothing about them) help?
this might help
http://forum.xda-developers.com/showthread.php?p=43293134
Sent from my SPH-L900 using Tapatalk 4 Beta
mrmondaynight said:
First rom was slim bean
second was liquid smooth
Since it's happening on both, I know I'm doing something wrong
I just don't know what exactly it is.
Do the custom roms use different frequencies?
Would flashing a new modem(i know nothing about them) help?
Click to expand...
Click to collapse
Need to go back to a TW based rom, reprovision, ##72786# in dialer
Then you will have 4g back
If going to flash any aosp rom after this- most have lost 4G capability past 5/28 versions
I am using the 5/28 slimbean with fine 4G
bjrmd said:
Need to go back to a TW based rom, reprovision, ##72786# in dialer
Then you will have 4g back
If going to flash any aosp rom after this- most have lost 4G capability past 5/28 versions
I am using the 5/28 slimbean with fine 4G
Click to expand...
Click to collapse
sorry for not updating
went back to stock then flashed the 5/28 build
Got LTE back :good:
Okay so I have a question I am hoping someone can help me with. I am on t mobile, I have an S4. Currently I am rooted and I have android 4.2.2 Alpha 11.0 Bioshock kernal 3.0. I installed it when it first came out and since then I have been MIA at work. I want to install "the Sickness" on my phone. But I wasn't sure if the procedure was the same as usual. I saw something about "safestrap" and I just wanted to make sure I can load the rom as I would normally. Thanks for any assistance, I did look around before I posted this but could find anything about tmobile. I probably miss somethings.
No safestrap, you can flash it normally but you'll also need to update your modem to NB4
Update the modem first?
ENOEKIM said:
Update the modem first?
Click to expand...
Click to collapse
No after
~Sent From My Insane S4~
Hello,
Is there any kit kat touchwiz ROM available which is somewhat stable? I would like to be able to use tap n pay. I have a Verizon NOte 2 with such a ROM and it works great. I am upset that it is so hard to find a ROM for the tmobile phone.
I guess Tmobile never released kitkat for this phone?
Lol .. :sly:
Use S.W.A.R.M (Stock) or Test Rom 1.2 (it has some S5 apps - does not have wifi calling) follow all instructions for installing.
Sorry SWARM isnt KitKat. Rom of Thrones is - which is the base for my Test Rom 1.2 - Good Luck.
Double0EK said:
Use S.W.A.R.M (Stock) or Test Rom 1.2 (it has some S5 apps - does not have wifi calling) follow all instructions for installing.
Sorry SWARM isnt KitKat. Rom of Thrones is - which is the base for my Test Rom 1.2 - Good Luck.
Click to expand...
Click to collapse
Thanks,
I did try test ROm and my wifi wasn't working. I now know that its because I needed to update my baseband .. Which I have now done. SO ill give one of those a try.
I also understand that we can load AT&T roms on this phone as long as we are using the T889 Radio,,, so I am looking at those roms as well
ilmar72 said:
Thanks,
I did try test ROm and my wifi wasn't working. I now know that its because I needed to update my baseband .. Which I have now done. SO ill give one of those a try.
I also understand that we can load AT&T roms on this phone as long as we are using the T889 Radio,,, so I am looking at those roms as well
Click to expand...
Click to collapse
Yes. You can also try AGNi Kernel if Wifi still isnt working. From my experience 4.3.0 is the best so far.
Double0EK said:
Yes. You can also try AGNi Kernel if Wifi still isnt working. From my experience 4.3.0 is the best so far.
Click to expand...
Click to collapse
I had to flash the wifi fix. Im not sure if flashing a kernel would have fixed my wifi problem. As I understand; the issue is that my phone has the original bootloader that it was shipped with. it doesnt have the 4.3 OTA bootloader therfore I had to install this wifi fix.
SO now I have a Tmobile T889 running an ATT touchwiz rom... I have working LTE(LTE worked with Tmobile roms too). To get the LTE to work I had t flash the latest tmobile radio. My Google wallet tap n pay works again. I am extremely happy about this setup!
Oh... and I am using AT&T go as the service... not Tmobile
ilmar72 said:
I had to flash the wifi fix. Im not sure if flashing a kernel would have fixed my wifi problem. As I understand; the issue is that my phone has the original bootloader that it was shipped with. it doesnt have the 4.3 OTA bootloader therfore I had to install this wifi fix.
SO now I have a Tmobile T889 running an ATT touchwiz rom... I have working LTE(LTE worked with Tmobile roms too). To get the LTE to work I had t flash the latest tmobile radio. My Google wallet tap n pay works again. I am extremely happy about this setup!
Oh... and I am using AT&T go as the service... not Tmobile
Click to expand...
Click to collapse
Yes flashing a kernel would have fixed the wifi. Flashing the patch wouldve probably made things worse to be honest..now the only way to revert the patch is to odin back to the original firmware...
Im on 4.1.2 Bootloader myself. Havent upgraded to anything above that..i only flash kernels and the modems. Works fine for me. Only issue is the charging while phone is off doesnt work.
Which Rom did you use?
I need help in installing the factory Touchwiz ROM for my Galaxy SIII. I don't know where to get it and I don't know which one I need.
The reason is because CyanogenMod is not working correctly with my FreedomPop (Sprint) network. I can't update PRL or profile. The camera app doesn't work either, because it constantly crashes and I have to reboot the phone. Various other issues, but those stand out as priority. Any help would be greatly appreciated, thanks!
Here's my phones specs:
Current CM version: 11-20150222-NIGHTLY-d2lte
SPH-L710
Android version: 4.4.4
Baseband version: L710VPUDND8
adabo said:
I need help in installing the factory Touchwiz ROM for my Galaxy SIII. I don't know where to get it and I don't know which one I need.
The reason is because CyanogenMod is not working correctly with my FreedomPop (Sprint) network. I can't update PRL or profile. The camera app doesn't work either, because it constantly crashes and I have to reboot the phone. Various other issues, but those stand out as priority. Any help would be greatly appreciated, thanks!
Here's my phones specs:
Current CM version: 11-20150222-NIGHTLY-d2lte
SPH-L710
Android version: 4.4.4
Baseband version: L710VPUDND8
Click to expand...
Click to collapse
If you don't have a touchwiz backup, go to the Android development section and download a rom to flash. You can get either the stock or Wicked X roms there. They will let you update PRL and profile.
@ivpre Thanks for the response! Any suggestion which version to get? Would the latest one work? Reason I'm asking is I used to have a Verizon Galaxy SIII and once you took the update, it locked the bootloader. Is this something I should be concerned about?
adabo said:
@ivpre Thanks for the response! Any suggestion which version to get? Would the latest one work? Reason I'm asking is I used to have a Verizon Galaxy SIII and once you took the update, it locked the bootloader. Is this something I should be concerned about?
Click to expand...
Click to collapse
One you upgrade to a firmware with Knox you can't revert back to one without it. Not a problem for most folks. I currently use ND8 bootloader with NDC modem. I hear NJ2 has a fair performance boost tho.
adabo said:
@ivpre Thanks for the response! Any suggestion which version to get? Would the latest one work? Reason I'm asking is I used to have a Verizon Galaxy SIII and once you took the update, it locked the bootloader. Is this something I should be concerned about?
Click to expand...
Click to collapse
You are probably good since you were running CM. But to run the latest TouchWiz, you need to be on ND8 or NJ2. If not on either of those, read the stuff below.
MAKE UP A NANDROID BAKCUP OF YOUR CURRENT SET UP
To update to NJ2: http://www.sammobile.com/firmwares/d...10SPRDNJ2_SPR/
Flash a recovery via ODIN, it is the program you used in the above step: http://forum.xda-developers.com/show....php?t=2201860
There is also TWRP somewhere, but even though Philz isn't being developed, I haven' t had any issues with it. But if you want to recover your previous setup, it is probably best to use the same recovery as before.
The latest WickedX or Wicked S5 should work just fine. If you are unsure of your current firmware, I would just follow the directions above. Then you can flash a rom or root.