Related
Any one tried this.
Im installing it now
http://incredibleroms.com/roms/jager/
I'll give it a try.
Failed on install in Rom Manager.
Reverting to leaked 2.2 now.
Bummer it looked great without sense.
Jager : Update
I got it up and running well. I installed it using ROM Manager, wiped the cache and let it do its thing. Something odd though. I cant seem to get the "Checking phone storage" icon in the status bar to go away. 720p recording, 8mp camera, wireless tether and adw launcher are all included and working. Im going to try to get ahold of the developer, seems like some good work.
-Craig
Edit
Sent from my ADR6300 using XDA App
Its 2.2 through and through. Im giving it another shot and reinstalling it to troubleshoot the "Checking phone storage" error.
also failed for me in rom manager, coming from 2.2 sense leak
SR3TLAW said:
I got it up and running well. I installed it using ROM Manager, wiped the cache and let it do its thing. Something odd though. I cant seem to get the "Checking phone storage" icon in the status bar to go away. 720p recording, 8mp camera, wireless tether and adw launcher are all included and working. Im going to try to get ahold of the developer, seems like some good work.
-Craig
Click to expand...
Click to collapse
Checking on that right now not sure about the rom manager issue will have to check with koush on that... Working on an update now with more fixes and changes...
CJ
CaptainJager said:
Checking on that right now not sure about the rom manager issue will have to check with koush on that... Working on an update now with more fixes and changes...
CJ
Click to expand...
Click to collapse
Fantastic rom although it took me a few time to get it to work. Here is what i did. (Tried it from rom manager and no go)
In recovery,
1. to wipe/factory reset.
2.wipe cache partition,
3. then go to advanced options at the bottom and format cache.
4. Format dalvik cache (not sure if this was necessary but i did it just in case)
5. Reboot
After a couple of minutes you will be good to go.
So far no real bugs in fact it less buggy than the stock froyo and skyraider and quicker it seems
Performance- Linpack results
Peak so far - 40.707 MFLOPS, .13 secons
avg - 38-39 MFLOPS .14 seocnds
Fully de-odexed and slim
I like it a lot so far but just my opinion but you should def try it out
jgrimberg1979 said:
Fantastic rom although it took me a few time to get it to work. Here is what i did. (Tried it from rom manager and no go)
In recovery,
1. to wipe/factory reset.
2.wipe cache partition,
3. then go to advanced options at the bottom and format cache.
4. Format dalvik cache (not sure if this was necessary but i did it just in case)
5. Reboot
After a couple of minutes you will be good to go.
So far no real bugs in fact it less buggy than the stock froyo and skyraider and quicker it seems
Performance- Linpack results
Peak so far - 40.707 MFLOPS, .13 secons
avg - 38-39 MFLOPS .14 seocnds
Fully de-odexed and slim
I like it a lot so far but just my opinion but you should def try it out
Click to expand...
Click to collapse
Oh haha didnt know i was responding to the creator of the rom duh/ Anyways while i got you thanks for the rom, i like all of your roms. also right now i have the 2.2.4 version installed but when i go to the site it shows the previous one and not the 2.2.4?
...
Thanks dude. Let me know what the deal is. Also, something to look into, when you answer your phone, the htc sense slide up slide down is appearing, not the slide deal. Looking forward to trying out your work.
-Craig
Is ADW really the way to go, Ive played with Launcher Pro; its pretty bad-ass.
jgrimberg1979 said:
Fantastic rom although it took me a few time to get it to work. Here is what i did. (Tried it from rom manager and no go)
In recovery,
1. to wipe/factory reset.
2.wipe cache partition,
3. then go to advanced options at the bottom and format cache.
4. Format dalvik cache (not sure if this was necessary but i did it just in case)
5. Reboot
After a couple of minutes you will be good to go.
So far no real bugs in fact it less buggy than the stock froyo and skyraider and quicker it seems
Performance- Linpack results
Peak so far - 40.707 MFLOPS, .13 secons
avg - 38-39 MFLOPS .14 seocnds
Fully de-odexed and slim
I like it a lot so far but just my opinion but you should def try it out
Click to expand...
Click to collapse
I just cant get this installed....followed your steps. Anything else maybe you left out? I tried rom manager already.
santana11981 said:
I just cant get this installed....followed your steps. Anything else maybe you left out? I tried rom manager already.
Click to expand...
Click to collapse
Which version are you using, because i am using 2.2.4 but when i tried the previous one which was 2.2 it didnt work. when i check about 45 mins ago the old one 2.2 was back up and the version i am on 2.2.4 was taken down for some reason. I just checked a second ago and the latest one is back up, so try that one if you havent yet, but dont use rom manager because it doesnt work for some reason and follow the steps that i put up
installed this rom and I had no data connection. Rest the phone and no luck, also did a battery pull and still no data. Did *228 and let it reset after programming and all seems to be working fine. Thanks for a great rom.
jgrimberg1979 said:
Which version are you using, because i am using 2.2.4 but when i tried the previous one which was 2.2 it didnt work. when i check about 45 mins ago the old one 2.2 was back up and the version i am on 2.2.4 was taken down for some reason. I just checked a second ago and the latest one is back up, so try that one if you havent yet, but dont use rom manager because it doesnt work for some reason and follow the steps that i put up
Click to expand...
Click to collapse
I clicked the link in your original post and that still shows 2.2.0....but when i went to main page i see updated version...thanks dude
Wow, I had no idea people would have this much trouble with it. I can post my 2.4 version of it up if anyone wants to give that a try. Hit me up if your interested.
I can post the 2.24 version if anyone is interested.
SR3TLAW said:
I can post the 2.24 version if anyone is interested.
Click to expand...
Click to collapse
its back up now
This is an unusal situation but eventually everyone should be able to get it, like i said it took me a couple of trys. Its deferent than most roms because this on actually forces a full wipe, which is def unusual. Also one thing i noticed when i put it in the cooker just to see the specs and it show "unsecured boot" which is unusal for roms to have
Yea it is back up.
Some bugs I found:
Search feature is not working from home screen.
At first install the messages app doesent seem to be installed correctly and for some reason their is no phone app in the launcher home row.
MMS does not work
couldn't get teh wireless tether in AP mode working
Hello XDA-Forum
As of today this is my first day and post here.
As a noob ( I watched the video on reg, i found it funny yet noobfriendly D: ) i would like to ask some questions that the all-mighty search button could not find me, or atleast i could not find
I whacked my head all day searching for a way to root my HTC Wildfire S a520e running on 2.3.3 stock marvel s-off phone
and after by mistake factory reseting it, twice....
I finally managed to root it with OneClickRoot or something.
Then i tried to to what i originaly wanted to root for, Overclock.
But after downloading the rom i got from a youtube video, it f**ked me up good.
Now my phone is overclocked, but is slower. and the menu's are all glitchy and white and wrong.
I would like to ask how to return to the stock rom of 2.3.3 that i so much desire.
Meanwhile while i await your answears of joy, i am downloading Cyanogen 7.2 Rom that i found on the interwebs and should so-fit my tiddy little wildfire s.
Toodles.
I installed Cyanogen... and .... well i don't like it (Q_Q)!
i want my old 2.3.3 back (cry)
It feels slower, i don't like the UI
EDIT:
Now that i look at it again.. it's not that bad qq
but where's the android market/google play ?
You need to flash Google apps package from clockwork mod recovery:http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip for market to work.
If you want to go back to stock, download a ruu installer for your region eg euro, Asia etc from here:http://forum.xda-developers.com/showthread.php?t=1074445
Install from a windows pc
As un-adaptable to new stuff i am and as much i hate change.
I find this cyano-genic blue colour to be semi attractive.
and i decided i'll keep it.
I read that cyanogen has built in overclocking.
Where can i see the hardware? i try'd in about settings but it doesn't say there.
For overclocking go:
Settings
Cyanogenmod
Performance
Cpu
I find this slightly more complicated than the normal android sense, but herpyderpderp atleast i'll be the only one in my class with a custom rom 8D
All the others are iOS/IceCreamSandwich richbishes D:
Is there something Cyanogen can't do that the original android stock can do?
intel007 said:
You need to flash Google apps package from clockwork mod recovery:http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip for market to work.
If you want to go back to stock, download a ruu installer for your region eg euro, Asia etc from here:http://forum.xda-developers.com/showthread.php?t=1074445
Install from a windows pc
Click to expand...
Click to collapse
Nevermind, worked D: I'm a potato.
I know i ask a lot of questions but i'm stuck at "Touch the android" after i flashed this thing
i touch the android and nothing happens... this happens on boot
I find myself in a position where i cannot procceed, this "touch the android" is stopping me ._.
hawp...
You might need to reflash.
Clear your data and dalvik in cwm
Flash cm7 latest nightly
Flash gapps
On first start take your time DONT press the android right away.
Give all background apps and SD time to load, maybe 30-60 seconds then press it and continue setup.
I have had that issue in the past.
Hope it helps you.
CM7 is a great rom, so customisable enjoy and make it your own.
intel007 said:
You might need to reflash.
Clear your data and dalvik in cwm
Flash cm7 latest nightly
Flash gapps
On first start take your time DONT press the android right away.
Give all background apps and SD time to load, maybe 30-60 seconds then press it and continue setup.
I have had that issue in the past.
Hope it helps you.
CM7 is a great rom, so customisable enjoy and make it your own.
Click to expand...
Click to collapse
I factory reseted.. i hate having to do that.....
it got stuck at cyanogen 7 loading boot, will this happen again if i use the thing you gave me for android?
damN! factory reset didn't fix it, how do i reflash when i deleted the file from the SDCard? now i can't put it back on the SDcard
EDIT: I got the file on again, but this software is way too fragile...
http://pockethacks.com/htc-wildfire-s-custom-rom-android-2-3-3-gingerbread/
Is that older or new'r ?
And can i get THAT interface on my now installed rom?
EDIT:
Stuck at HTC, still wown't load after re-flash
Did you wipe data and dalvik?
Its important you do!
Use this cm7, latest nightly build http://cm7-wildfire-s.googlecode.com/files/update-cm-7.2.0-RC1-marvel-03_29_2012.zip
I'm thinking of getting this http://code.google.com/p/cm9-wildfi...rc0-unofficial_rom-alpha0-signed.zip&can=2&q=
So far so good, it has minor problems i don't like
but what can i do -sigh-
there's an option called "Data Enable"
Does that take like money or anything?
also how can i use Voice Speech in this rom?
i wanna be able to talk on skype and it turns out as text
just as a question, could there be a problem during the installation, becouse the clock on the start seems to not be visible, it said some kind of error and i removed it from the screen. also it has 90mb free now
feels like first time i installed it it had like 110
THe clock on the lockscreen? You probably changed a setting. Or a clock widget? You probably deleted it. Just hold on the home screen and re add it form there.
bingzz said:
THe clock on the lockscreen? You probably changed a setting. Or a clock widget? You probably deleted it. Just hold on the home screen and re add it form there.
Click to expand...
Click to collapse
Yes that worked, it wasn't deleted i guess.
I pretty much set up my phone overnight. (now my body hurts from exhausture)
I'm still haveing problems setting things up like voice to text on skype and other stuff.
Overclocking crashes my phone a lot. I know that happens but it happens like every 20 mins or something.
Also can i UPDATE from 7 to 9 without having to start over.
just update?
UPDATE: Also, i loose some files from sdcard (games installed) when it crashes when overclocked sometimes.
What the... i restarted my phone and all the stuff on SDCard is deinstalled, gone D:
EDIT: It came back after 5 mins
EEK!
I was putting some stuff on my SDCard when suddenly i open proccess list and on SC card it says No applications, 1.4 used, 431free but nothing QQ Hawp
all my icons are now with the android pic on them D: helppp
I'm starting to hate this already D:
Also my google play went back to market
If you want to downgrade to 2.3.3, check this tutorial
http://forum.xda-developers.com/showthread.php?t=1540952
I was viewing the most recent CM9 nightly changes and noticed a link to the CM10 development log for our p930. No clue when the nightly builds will start though but its nice to be able to keep up to date on the progress!
http://cm10nightlies.nechko.com/index.php?device=p930&translations=
nice, i'll bet they release a cm10 nightly before the stable cm9, unless that stable v is coming out in the very very near future.
regardless of the official "we ain't working on cm10 until we release the stable cm9" it looks as if they dove right in. good work.
:good:
I dunno, I could see nightlies being at least 2-3 weeks away. There's a chance we could see an RC2 followed closely by a final right around the same time the first official CM10 nightlies are up.
waitng
Patiently waiting for the dev to finish this up enough for a release. hoping it's soon, i want some buttery goodness.
might want to take a peek in the dev forum.
Any picture of cm10
SergioFern said:
i want some buttery goodness.
Click to expand...
Click to collapse
There's no battery goodness for unofficial build at all. drained battery overnight by just laying lazy in airplane mode, all apps stopped. :sigh:
returning to CM9
Billy Madison said:
There's no battery goodness for unofficial build at all. drained battery overnight by just laying lazy in airplane mode, all apps stopped. :sigh:
returning to CM9
Click to expand...
Click to collapse
did you turn the governor from the default performance mode to ondemand mode? that kills the battery pretty hard. i lost 12% overnight connected to HSPA+ in the CM10 preview.
Anyone know where i can find some custom kernels to go with my CM10 ROM? I tried Semaphore 2.6.0 and 2.6.5 (found out later .5 is for Jelly Bean 4.2) and both looked like they installed, but About Phone > Kernel was CM10 still, and Devil Kernel 1.9.5 (failed in TWRP).
Help!
LG P930 - CM 10 (stable) issues
Hi, I am new to the forum so sorry if I am posting at the wrong place. I have CM 10 installed on my LG P-930 (along with built in kernel) and last night suddenly phone rebooted and has been in the bootloop since then. It wont even let me go into recovery to restore from back up, when I press power+vol down, it just starts normally showing LG logo and then CyanogenMod log and is stuck there indefinitely. I have even left it there for about 30 mins but nothing happens. Any ideas?
Thanks
cm-10.1-20130228-NIGHTLY-p930.zip major problems
1- power button dont turn off the screen for sleep mode
2- touch keys lights dont turn on
3- voice typing dont work after flashing gapps-jb-20121212-signed ( it shows force close )
nss007 said:
cm-10.1-20130228-NIGHTLY-p930.zip major problems
1- power button dont turn off the screen for sleep mode
2- touch keys lights dont turn on
3- voice typing dont work after flashing gapps-jb-20121212-signed ( it shows force close )
Click to expand...
Click to collapse
I'm on the same one without those problems... it sounds like a bad flash. Go back to recovery, wipe cache/dalvik, flash the nightly, then Fix Permissions. If not, try a full wipe. Also, the thread for CM10.1 nightly discussions is over here.
mpsantiago said:
I'm on the same one without those problems... it sounds like a bad flash. Go back to recovery, wipe cache/dalvik, flash the nightly, then Fix Permissions. If not, try a full wipe. Also, the thread for CM10.1 nightly discussions is over here.
Click to expand...
Click to collapse
i did all wipes before flashing cm10.1 . new version released i'll try that
i'm new to cm10.1
what is fix permissions ? what should i do in this menu ?
i'm using default CWM flashed via rom manager . is it important to use newer version of CWM TOUCH ?
where can i download and flash cwm touch Recovery?
what is this new KERNEL and GPU driver ? dose it improve the performance and battery usage ?
nss007 said:
cm-10.1-20130228-NIGHTLY-p930.zip major problems
1- power button dont turn off the screen for sleep mode
2- touch keys lights dont turn on
3- voice typing dont work after flashing gapps-jb-20121212-signed ( it shows force close )
Click to expand...
Click to collapse
I flashed it last night and haven't had any problems with it.
nss007 said:
i did all wipes before flashing cm10.1 . new version released i'll try that
i'm new to cm10.1
what is fix permissions ? what should i do in this menu ?
i'm using default CWM flashed via rom manager . is it important to use newer version of CWM TOUCH ?
where can i download and flash cwm touch Recovery?
what is this new KERNEL and GPU driver ? dose it improve the performance and battery usage ?
Click to expand...
Click to collapse
Fix Permissions can be found in the Advanced menu in CWM. Just choose it and let it do its thing... takes about 30sec usually.
I have gotten into the habit of running it after every flash, especially dirty ROM flashes.
The GPU Driver is supposed to fix some graphic glitches in 10.1. I haven't noticed much change in battery with it. As for the kernel... probably best to read the OP in the Wind thread for the details on that.
mpsantiago said:
Fix Permissions can be found in the Advanced menu in CWM. Just choose it and let it do its thing... takes about 30sec usually.
I have gotten into the habit of running it after every flash, especially dirty ROM flashes.
The GPU Driver is supposed to fix some graphic glitches in 10.1. I haven't noticed much change in battery with it. As for the kernel... probably best to read the OP in the Wind thread for the details on that.
Click to expand...
Click to collapse
I hadn't noticed if 'fix permissions' had been fixed.. but I remember learning the hard way (around GB-era p930) that using it in cwm bricked my phone.. It works fine now?
Edit:
Here's a quote from a CM9 rom:
Warning:
Please do not fix permission via new CWM, it screw some files permission! I'm not tried older version. I will set permission if necessary on every files i provide, so please don't fix permission.
For every additional / patch files you don't need to wipe cache / dalvik or fix permission, i will do if necessary.
Click to expand...
Click to collapse
Just want to confirm that this is not an issue now (or maybe if it never was..?) before I end up putting my p930 into bootloop again.. lol
on BB8 using the LTM app with the full!screen app on market for my gnex, worked fine till phone rebooted while navbar was hidden and afte reboot my top status bar came back but not the bottom navbar...
I dont have a back up handy, yes I know noobish, I promise no more late night fiddling...
Can someone help me figure this one out?? Is there something that needs to be replaced in the system?? Can I get away with a "dirty flash"?? Never done that before, what could happen??
Or is there a quick fix I am missing?
I am guessing this may have something to with the framework apk?? Would replacing that fix the issue? How would I "re-do" the framework?
heckyhec5881 said:
on BB8 using the LTM app with the full!screen app on market for my gnex, worked fine till phone rebooted while navbar was hidden and afte reboot my top status bar came back but not the bottom navbar...
I dont have a back up handy, yes I know noobish, I promise no more late night fiddling...
Can someone help me figure this one out?? Is there something that needs to be replaced in the system?? Can I get away with a "dirty flash"?? Never done that before, what could happen??
Or is there a quick fix I am missing?
Click to expand...
Click to collapse
I ran into this issue when I went from stock to a ROM that had a customized NAV BAR then I changed to another ROM without this mod. I would backup my SD Card, do a nandroid of the current setup, factory reset, then reflash the desired ROM. Dirty flashing causes problems like these.
Ya I see, but thats the thing I never dirty flash so I was wondering how to fix it, I can start over. Thanks for your time
you could try dirty flashing over what you have now just to see if it comes back. worst case, clean flash
In this thread you can post your experience, questions, and all other stuff that is not directly related to the RE-FLEXxx rom.
I do this to keep the dev thread clean.
Thank you for your understanding.
I will take a look into this thread from time to time but the main goal is so that users of the RE-FLEXxx rom can help out each other and that they can find help from each other in one place.
Regards, civ.
I installed 2.0 on my N5110 (coming from 1.9) and it is working well but the top of my tablet is non-responsive to touch. Happened on other releases but a reboot always fixed it. This time the problem remained, so I tried wiping cache, dalvik, fixing permissions, reboots, and all sorts of combinations. I did finally manage to fix the issue yesterday after one of those reboots but now the problem just reappeared and won't go away. Any suggestions?
Edit: Finally got it resolved with a full wipe of data, cache, and dalvik through cwm recovery. Then I flashed Civz reflexx Rom 2.1 and rebooted. The top of the screen still did not respond to touch, so I rebooted and now everything works perfectly. :thumbup:
anybody else still having SNote FC on them in 2.0? also the extended menu items will not work for me...setting fc
dpaik said:
anybody else still having SNote FC on them in 2.0? also the extended menu items will not work for me...setting fc
Click to expand...
Click to collapse
no snote and extended menu all working for me. Maybe you had a bad download? Otherwise try wiping and installing fresh.
dpaik said:
anybody else still having SNote FC on them in 2.0? also the extended menu items will not work for me...setting fc
Click to expand...
Click to collapse
yes, hd happened to me, I re downloaded and reflashed it again and is OK now..
well, I finally installed twrp, and backed up my stock rom, so I am getting ready to flash the first custom rom on any tablet I have had!
one quick question; I am a very experienced rom flasher; I see in TWRP, there are several options under the wipe menu, and, I know to check the first 4 options before flashing this rom; then, there are 2 more options, wipe internal card, and wipe external card.
I know not to wipe my external card, since all my "stuff" is there...should I wipe the internal card before flashing, or is that not necessary when flashing this rom from a stock rom?
I apoligize if this belongs in the the TWRP thread, but I thought since others have probably gone through this, I wanted to post the question here as well. I guess I should post it in the TWRP thread as well...
thank you!
wase4711 said:
well, I finally installed twrp, and backed up my stock rom, so I am getting ready to flash the first custom rom on any tablet I have had!
one quick question; I am a very experienced rom flasher; I see in TWRP, there are several options under the wipe menu, and, I know to check the first 4 options before flashing this rom; then, there are 2 more options, wipe internal card, and wipe external card.
I know not to wipe my external card, since all my "stuff" is there...should I wipe the internal card before flashing, or is that not necessary when flashing this rom from a stock rom?
I apoligize if this belongs in the the TWRP thread, but I thought since others have probably gone through this, I wanted to post the question here as well. I guess I should post it in the TWRP thread as well...
thank you!
Click to expand...
Click to collapse
This is my opinion on it.....I usually only wipe the internal card if I am starting completely over with flashing a device. Wiping data/cache is usually all that is needed but if there are a lot of apps that get installed over time their folders get left and every so often I like to wipe it to get rid of all the "orphaned" folders. If you are going to just restore all those apps anyways then it won't make a difference either way. If you are going from the stock rom to a TW custom based on the stock it shouldn't be necessary to flash internal.
thanks man, that is what I thought, but, since I have never flashed a custom rom on to any tablet I have owned, I wasnt sure if there was other "stuff" on the internal card that might be needed no matter what; and, yes, since I will just be restoring all of my apps pretty much once I flash this custom rom, I might as well just leave the internal card alone...
I appriciate your fast reply!
wase4711 said:
thanks man, that is what I thought, but, since I have never flashed a custom rom on to any tablet I have owned, I wasnt sure if there was other "stuff" on the internal card that might be needed no matter what; and, yes, since I will just be restoring all of my apps pretty much once I flash this custom rom, I might as well just leave the internal card alone...
I appriciate your fast reply!
Click to expand...
Click to collapse
Please take my advice with caution...I did not take your point into consideration because I have yet to do it on this particular tablet (only had the Note for 1 day). Never had a problem on any other tablets/devices but who knows. I wouldn't think there would be an issue. However, like you say probably no reason to wipe internal if you will just be restoring them back anyways.
CCallahan said:
Please take my advice with caution...I did not take your point into consideration because I have yet to do it on this particular tablet (only had the Note for 1 day). Never had a problem on any other tablets/devices but who knows. I wouldn't think there would be an issue. However, like you say probably no reason to wipe internal if you will just be restoring them back anyways.
Click to expand...
Click to collapse
no probs, it worked like a charm!!
just trying to figure out the easiest way to get a nav bar to show up, without having to lower the screen dpi, or to maually edit the buildprop..
thanks!
wase4711 said:
no probs, it worked like a charm!!
just trying to figure out the easiest way to get a nav bar to show up, without having to lower the screen dpi, or to maually edit the buildprop..
thanks!
Click to expand...
Click to collapse
Use the terminal command on my rom
su
softkey_on
all info is in rom thread OP.
thanks, I thought I had read every terminal command in the thread, but I guess I didnt!
tun.ko or tap.ko?
I'm trying to get openvpn to work on REFLEX2.0 in tap mode. Looks like I need a tap.ko kernel module for either the stock kernel or the CivZ-StormBorn_Rev2.0-OC kernel. Anyone know where I might find such a thing?
---------- Post added at 03:59 PM ---------- Previous post was at 03:54 PM ----------
I notice the CivZ-StormBorn_Rev2.0-OC kernel has no /proc/config.gz file. That means the kernel was not compiled with the CONFIG_IKCONFIG option. Is there a way to see what options are baked in to the kernel?
Problem with softtouch Key "back"
hi everyone. I enebled softtouch Keys, but softtouch Key "back" doesn't work correctly. sometimes, it doesn't work, and i must tap it a lot of times.
Why i have with problem?
thanks in advance.
USB Mass Storage Unexpectedly Removed Loop
Hi,
Not sure if I am posting this in the right spot but I am getting a mass storage device unexpectedly removed loop message whenever I attached my USB flash drive? I am using the V2.1 ROM and kernel so wondering if anyone else is facing this same issue? Thanks!
MrAlexey said:
hi everyone. I enebled softtouch Keys, but softtouch Key "back" doesn't work correctly. sometimes, it doesn't work, and i must tap it a lot of times.
Why i have with problem?
thanks in advance.
Click to expand...
Click to collapse
i have better luck if i tap at the bottom of the softkey. it's almost as if the icon is bigger than the actual location that the press registers.
Chrome screen bug solution
Basically the problem is the notification bar, combined with the lack of on-screen softkeys. In order to fix it, you need the following:
Xposed Framework:
http://mohammadag.xceleo.org/public/Android/XposedInstallerDownloadUnsigned.apk
How it works:
http://forum.xda-developers.com/showthread.php?t=1574401
App Settings manager:
http://mohammadag.xceleo.org/public/Android/Xposed/AppSettings_0.4.apk
I've been using this combination on my tablet for a while now. It lets me change the resolution for individual apps. For instance, I want the tablet mode of Gmail, but I want my tablet to run in phablet mode so that I get the top notification bar and no softkeys.
The Chrome fix is simple. The app settings for the Chrome executable should have the fullscreen option toggled, the DPI set to 160, and the screen resolution set to 800x1200. It then hides the notification bar on top while you're in the browser, and shifts the screen that quarter of an inch where it is offset due to the Chrome bug on tablets without softkeys. If you need to access the notification bar, simply swipe down on the screen from the top edge and it will pop up.
If the print size is too small, you can use the accessibility settings in Chrome to scale up the font size.
acfc81 said:
Hi,
Not sure if I am posting this in the right spot but I am getting a mass storage device unexpectedly removed loop message whenever I attached my USB flash drive? I am using the V2.1 ROM and kernel so wondering if anyone else is facing this same issue? Thanks!
Click to expand...
Click to collapse
Hi,
Please ignore my last message as the issue was using the wrong kernel on my part. Thanks!
Question
I'm thinking of flashing a new ROM having used stock for month or so now. My concern is regarding the apps I have installed and am currently using, specifically FolderMount.
If I flash a new ROM (either civs older 4.1 build or his newer 4.2 one depending on how he is progressing), will I lose the links?
I have about 25GB worth of game obb and data transferred over from my internal memory to my micro SD. I dont fancy using up all my download allowance having to re- download and install all of those (plus the time it takes to transfer them all over). I dont mind losing the layout of my homescreens as I'm thinking of shaking that up anyway.
I've only one past experience of flashing a Rom and that ended up with me having to reinstall and set up all my apps (jump from ICS to JB on my Asus TF101)
flex beam 4.2.2 download unsuccessful
flex beam 4.2.2 download unsuccessful
Please upload