Related
I think I did something wrong when I rooted my device. I just got it on monday, it's my first android lol so I rooted my GS3 and straight away flashed PA and the wifi doesn't connect, and data just drops down to edge or stops working after I try to do something... help?
what were the steps you took to flashing?
mt3g said:
what were the steps you took to flashing?
Click to expand...
Click to collapse
Rooted with a tutorial I found on youtube, then I installed rom manager and installed Clockwork Recovery, then flashed Bacon JB (stock jellybean) it worked ok but then I wanted to try stock android and installed paranoid, and the data and wifi just don't seem to work right
Sindox said:
Rooted with a tutorial I found on youtube, then I installed rom manager and installed Clockwork Recovery, then flashed Bacon JB (stock jellybean) it worked ok but then I wanted to try stock android and installed paranoid, and the data and wifi just don't seem to work right
Click to expand...
Click to collapse
I would odin back to stock. .. and follow the procedure you search out in this forum. ..
Sent from my SGH-T999 using xda app-developers app
majic12 said:
I would odin back to stock. .. and follow the procedure you search out in this forum. ..
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I odin back to stock with a root66, and installed PA again, and having the same issue? the connection says saved, but when I try to connect it doesn't connect. anybody knows whats wrong?
Sindox said:
I odin back to stock with a root66, and installed PA again, and having the same issue? the connection says saved, but when I try to connect it doesn't connect. anybody knows whats wrong?
Click to expand...
Click to collapse
Maybe dont use PA. See if it is working. That could be the issue.
Sindox said:
I odin back to stock with a root66, and installed PA again, and having the same issue? the connection says saved, but when I try to connect it doesn't connect. anybody knows whats wrong?
Click to expand...
Click to collapse
Did you lose your imei?
-Sent from my GS3 running CM10.-
phositadc said:
Did you lose your imei?
-Sent from my GS3 running CM10.-
Click to expand...
Click to collapse
No, I dialed *#06# and it still shows my IMEI, why?
ioitall said:
Maybe dont use PA. See if it is working. That could be the issue.
Click to expand...
Click to collapse
I tried with PA, Codename Android, and CM10. They all pretty much don't stay connected to the wifi. I installed a touchwiz based custom rom cause those are the only ones that don't seem to have that problem. help please!!!
I'd really suggest you try and narrow down the issue. Really Odin back to stock and set up your phone. Do some speed tests with the stock ROM. And trst the WiFi. Don't just flash to stock and flash a ROM right away.
Sent from my SGH-T999 using xda app-developers app
Hello,
My phone is rooted but ROM is stock. I don't generally flash anything and just stick to removing bloatware.
I installed TWRP and now I cannot get the latest official OTA AT&T update since the update load fails due to not having stock recovery. I have been searching online and cannot figure out how to get stock recovery.
I have been able to locate a supposed stock zip ROM for this phone. Can I just somehow flash this ZIP to return my phone to stock.
On previous phones I have been able to do a factory reset, which I have done several times on this phone today, in order to get it back to stock and accept OTA updates. This TWRP seems extremely invasive and I cannot get rid of it.
Thanks for any help
dave
Wrong section dude better move it before you get flamed to general
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Use this http://forum.xda-developers.com/showthread.php?t=2052779 and POST IN THE CORRECT SECTION
Sent from my SGH-I317 using xda premium
You can run cf-auto root and it will install stock recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Need help guys, can't get the update , I'm only rooted and tried changing the date trick and no luck .. funny thing my next retry is after 805 hrs , any ideas what to do ?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
chadiz said:
Need help guys, can't get the update , I'm only rooted and tried changing the date trick and no luck .. funny thing my next retry is after 805 hrs , any ideas what to do ?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I gave up and ended up just flashing cleanrom 3.5. Didn't wipe, kept all of my apps and data. I recommend this route if, like me, you want to keep stock kernel and tw.
-----
I would love to help you, but help yourself first: ask a better question
http://www.catb.org/~esr/faqs/smart-questions.html
I am the original poster. My phone would not flash the stock ATT rom that I downloaded somewhere. It could have been a bad ROM.
I could only end up getting into recovery and download mode. I did something to erase the entire operating system.
The guys over at TWRP or at least the guys on the message board got me through it. I ended up flashing the 3.5 clean rom. I never flashed a rom before only rooted. i also flashed the new modem zip as well. So far so good I guess.
Im going to have to figure out how to do an entire backup of my phone so that next time I can just restore it.
Thanks for the replies
livingaboard said:
Im going to have to figure out how to do an entire backup of my phone so that next time I can just restore it.
Thanks for the replies
Click to expand...
Click to collapse
Boot in to recovery (it's now an option from the power button) and follow the very easy buttons for backup. Select everything for an entire system backup (7 checks, I believe). Future backups can be just your data and apps if you want.
-----
I would love to help you, but help yourself first: ask a better question
http://www.catb.org/~esr/faqs/smart-questions.html
So guys wat u r saying is there isnt any way to unroot then do the official update im rooted with the exynos app just tryed to update and duh got the same thing everybody else got but was hoping i didnt have to flash any roms
Sent from my SAMSUNG-SGH-I317 using xda premium
I bought a T-Mobile Galaxy S 3 LTE with model number SGH-T999L. I used Odin V3 1.85 to flash TWRP recovery and CyanogenMod 10.0.0.
Everything went well but my camera doesn't work. On launching the camera, I get a "Can't connect to camera" error and it quits. The same behavior is observed when using other camera apps. I tried the instructions in this thread(http://forum.xda-developers.com/showthread.php?t=2239414) but it did not fix my problem. I now want to go back to my stock ROM. I successfully downloaded and flashed stock recovery using Odin. However, Odin fails when I try to flash the stock ROM obtained from the samsung website. It gives me a "write failed" error and stops. Any tips or suggestions to help me out would be appreciated. Thanks
Is it supposed to use T999 firmware?
Only odin flash T999L firmware. I dont see it released yet at samsing-updates.com though.
Maybe samfirmware.com? I can look later.
Sent from my SGH-T999 using xda premium
re: sure fix
newidforu said:
I bought a T-Mobile Galaxy S 3 LTE with model number SGH-T999L. I used Odin V3 1.85 to flash TWRP recovery and CyanogenMod 10.0.0.
Everything went well but my camera doesn't work. On launching the camera, I get a "Can't connect to camera" error and it quits. The same behavior is observed when using other camera apps. I tried the instructions in this thread(http://forum.xda-developers.com/showthread.php?t=2239414) but it did not fix my problem. I now want to go back to my stock ROM. I successfully downloaded and flashed stock recovery using Odin. However, Odin fails when I try to flash the stock ROM obtained from the samsung website. It gives me a "write failed" error and stops. Any tips or suggestions to help me out would be appreciated. Thanks
Click to expand...
Click to collapse
Why not reflash the stock ODIN flash rom and make sure it all works ok for you, that will tell you exactly what the problem is.
If the stock rom is working properly, then there is only one thing left which is the culprit and that is the CM10/AOKP/AOSP
or PORTED roms which many people seem to like flashing.
The CM10/AOKP/AOSP and ported roms are excellent if you are a developer or if you like to do a lot of experimentation with your phone.
So the thing to do now is reboot your phone to recovery mode, do a "Factory Reset", "Wipe Cache", "Wipe System" and "Wipe Dalvik".
When that's done Open Odin and put the stock rooted T999 Tmobile Jellybean 4.1.2 into Odin's PDA slot, go into download mode
and once you see Odin is connected to the phone start the flash. Have patience for the phone to boot after its done flashing.
Here is the stock rooted Odin flash T999 Tmobile Jellybean 4.1.2 rom that you can download if you like: T999_UVDMD5
Official JB Firmware - Latest JB 4.1.2 Firmware
My suggestion to you is to only flash Samsung T999 Tmobile stock based Jellybean 4.1.1 or 4.1.2 roms in the future.
But who am I to say whats best..... This is just my personal opinion...... Which usually is not worth a dime. LOL
Sorry, but untill we know more about it, I would not flash T999 firmware onto the T999L.
Its only been out a day and tgey are different model phones with different hardware.
If you decide to try anyway, please post your results
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Sorry, but untill we know more about it, I would not flash T999 firmware onto the T999L.
Its only been out a day and tgey are different model phones with different hardware.
If you decide to try anyway, please post your results
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I am a newbie. I thought the T999 was the same as the T999L. That would explain why Odin doesnt flash stock T999 onto my device. Can anyone here post a link to the stock SGH-T999L ROM?
Just did a quick check and I dont see that the firmware has been made available for download yet.
If you want stock I would flash one of the stock based custom roms via recovery for now.
Out of curiosity, what is your current baseband version?
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Just did a quick check and I dont see that the firmware has been made available for download yet.
If you want stock I would flash one of the stock based custom roms via recovery for now.
Out of curiosity, what is your current baseband version?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Baseband version is T999LUVAMB7. Still waiting for stock ROM to be released on samsung-updates or sammobile.
newidforu said:
Baseband version is T999LUVAMB7. Still waiting for stock ROM to be released on samsung-updates or sammobile.
Click to expand...
Click to collapse
I had the same issue with the same phone. Got it 2 weeks ago haha. Did you happen to make a backup first using CWM Recovery? If so, you can just restore that backup and you'll have your camera functionality back. It's pretty annoying switching back and forth from CM10.1 back to stock just to take pictures but Rom manager makes it pretty quick and effortless.
Actually now that I think of it, they prob wont release the original firmware. Seems like the first build is never available, only when an update is released do we get firmware we csn download.
I am working with another member on getting something going for the T999L, but right now we are stuck until a verified safe method of rooting is found. (Dont want to flash a recovery or cf autoroot w/o knowing it wont screw something up)
Itll happen, but we just gotta be patient.
Just reread the op and see that you say you flashed TWRP. So you were able to initially gain root without any problems?
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Actually now that I think of it, they prob wont release the original firmware. Seems like the first build is never available, only when an update is released do we get firmware we csn download.
I am working with another member on getting something going for the T999L, but right now we are stuck until a verified safe method of rooting is found. (Dont want to flash a recovery or cf autoroot w/o knowing it wont screw something up)
Itll happen, but we just gotta be patient.
Just reread the op and see that you say you flashed TWRP. So you were able to initially gain root without any problems?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I used Odin to flash Clockwork Mod recovery first. I did not like Clockwork Mod's interface and reflashed with TWRP. I had no problems to gain root with either of these methods. I also tried Cyanogenmod stable 10.0.0 and then 10.1 RC2 without any problems. As far as I can tell, all apps work except for the camera. One word of caution though. As you can see from my posts, I am new and dont know what I am doing. I might have just gotten lucky since my device is still unbricked. I had only one "scary" moment during the entire process. I used TWRP to wipe my phone clean and was stuck with no OS install file. ADB sideload did not work since it could not recognize the device at that point. Luckily, I had a micro SD card lying around and was able to put in a new OS install file using my laptop and then TWRP was able to handle it.
tsticge aye
faytx1 said:
I had the same issue with the same phone. Got it 2 weeks ago haha. Did you happen to make a backup first using CWM Recovery? If so, you can just restore that backup and you'll have your camera functionality back. It's pretty annoying switching back and forth from CM10.1 back to stock just to take pictures but Rom manager makes it pretty quick and effortless.
Click to expand...
Click to collapse
Wish I had made a backup! Could you zip up the files contained inside "/system/cameradata/" folder and post a link here? It would help me and anyone else with the same problem restore the camera's functionality. In case you want to try it out, follow the instructions in this link but using the files from your stock backup
http://forum.xda-developers.com/showthread.php?t=2239414
newidforu said:
Wish I had made a backup! Could you zip up the files contained inside "/system/cameradata/" folder and post a link here? It would help me and anyone else with the same problem restore the camera's functionality. In case you want to try it out, follow the instructions in this link but using the files from your stock backup
http://forum.xda-developers.com/showthread.php?t=2239414
Click to expand...
Click to collapse
Here is the cameradata folder from the T999L.
http://d-h.st/Ciy
Good Luck!
How did you get Cyanogenmod installed on the t999l every time i try it aborts with status 7
Mine was failing with this same error. I reverted back to stock, re rooted, then downloaded the flash directly to the phones internal storage. Worked like a champ. I think in my case, there is an issue with the SD card, its kind of old.
Sent from my SGH-T999 using xda app-developers app
Beefstew said:
Mine was failing with this same error. I reverted back to stock, re rooted, then downloaded the flash directly to the phones internal storage. Worked like a champ. I think in my case, there is an issue with the SD card, its kind of old.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
You reverted to stock on the T999L? please exspain how that was done
Re flashed stock ROM using Odin. I believe I got the file from Samsung's website, but I'm not positive of that. I do know its huge, over 1 gig. If you need help with the re flash I know there are already how to's on here about that, so I won't go into it here.
Sent from my SGH-T999 using xda app-developers app
You must be using a T999 as your sig indicates, not a T999L. Am I correct?
Sent from my SGH-T999 using xda premium
Don't I feel like a tool now. Yes Doc, plain old t999 here. Now that I read back through the whole thread here I see that I was being a bit redundant. Now I will return to my closet under the stairs.
Sent from my SGH-T999 using xda app-developers app
No worries! We all do stuff like that from time to time!
Sent from my SGH-T999 using xda premium
A while ago I rooted my phone with cwm. I remained on the stock rom for a while, but eventually moved to cm 10. No problems. I wanted more features so I'm currently running a pacman nightly. Everything seemed to work, but after I flashed it I had very, very little space left in my internal storage. I read that this was probably a bug in cwm that caused Android system files to be duplicated, possibly even multiple times times. This is what I believed had happened. So yesterday I flashed twrp with Odin, and after rebooting it asked me to activate my phone. I don't have any cell or data signal, only wifi. I've looked everywhere and I can't find any single solution. Does anyone know what may be wrong, and how to fix this? I can try and post more information about this problem if necessary. Please help, thanks.
Anyone? Restoring backups from when everything worked does not work, nor does flashing a modem. When I go to "About Phone" in settings, my phone number is no longer my number. It just says 000-000-0016 (not my number). Sometimes I can get a data signal, only in areas with high signal. It just says "searching for service" everywhere else. On each boot, it tells me to "activate my device" but that doesn't work. I have no idea what to do at this point, can anyone help?
And now I just saw on the lockscreen "no sim card - searching for service". Not sure if that helps, but I'm open to anything at this point
Aaron R said:
And now I just saw on the lockscreen "no sim card - searching for service". Not sure if that helps, but I'm open to anything at this point
Click to expand...
Click to collapse
Do you have Sprint version? Just curious because of the "no sim card". I guess some ported roms will show that, but if it's Sprint version, I would flash back to TW ROM, reactivate by the ## code(don't remember what it is) or call Sprint to reactivate. Better to be on TW stock Rom if you use dialer codes or call Sprint.
Edit: dialer code is ##72786# to reset APNs. Once on TW ROM, open up phone, type in code in dialer.
sent from my GalaxyS3
Do I need to be on the stock TW rom to use the dial code to reset? I've already tried to use it on my pacman rom and it didn't work, saying it had no signal when I tried to dial it. Also, yes I am on Sprint. Would screenshots of the "about phone" page in settings help? Like I said, it lists an incorrect phone number as my number.
Aaron R said:
Do I need to be on the stock TW rom to use the dial code to reset? I've already tried to use it on my pacman rom and it didn't work, saying it had no signal when I tried to dial it. Also, yes I am on Sprint. Would screenshots of the "about phone" page in settings help? Like I said, it lists an incorrect phone number as my number.
Click to expand...
Click to collapse
Yes, you need to be on TW to use the dialer. The reset is ##72786#. This will completely reset your phone, so make sure you have everything you want saved backed up to your pc. It will go through the activation process as if you just got it out of the box, but my advice,flash back to stock, unrooted, from scratch, and then do it. Sucks, I know, but that's what I'd do.
Sent from my SPH-L710 using XDA Premium 4 mobile app
So it'll restore my phone number and reset everything?
And how would I go about unrooting?
Aaron R said:
So it'll restore my phone number and reset everything?
Click to expand...
Click to collapse
Yes, it should do exactly that. It will self-activate with your carrier upon reboot and get you back to the original settings. And unroot by flashing a stock unrooted tar. I'm sure qbking77 has a video. There are a lot of tutorials about rooting/unrooting.
Sent from my SPH-L710 using XDA Premium 4 mobile app
So if I flash the stock unrooted tar, I assume that I'll lose the custom recovery (cwm) but I bought cwm touch. Am I going to have to buy that back again if I choose to root my phone again?
Aaron R said:
So if I flash the stock unrooted tar, I assume that I'll lose the custom recovery (cwm) but I bought cwm touch. Am I going to have to buy that back again if I choose to root my phone again?
Click to expand...
Click to collapse
I don't understand why you would buy CWM touch? It's free, and you can get a working, modified copy from Kennyglass123's post here. But yes, you will lose root, recovery, apps, internal storage, everything except what's in your sd card. So backup pics and such to your pc first!
http://forum.xda-developers.com/showthread.php?t=2391616
http://forum.xda-developers.com/showthread.php?t=2391616
Sent from my SPH-L710 using XDA Premium 4 mobile app
It's free...of course it's free. Anyway so I guess I'll try flashing the stock tar later, and we'll see if that works. It's been extremely inconvenient being off the grid for a couple days, I hope this works. Thanks for all your help so far
Aaron R said:
It's free...of course it's free. Anyway so I guess I'll try flashing the stock tar later, and we'll see if that works. It's been extremely inconvenient being off the grid for a couple days, I hope this works. Thanks for all your help so far
Click to expand...
Click to collapse
Good luck, let us know how it works out.
Sent from my SPH-L710 using XDA Premium 4 mobile app
And where again could I get the stock tar? And after obtaining it, I would just flash it with Odi, correct?
Aaron R said:
And where again could I get the stock tar? And after obtaining it, I would just flash it with Odi, correct?
Click to expand...
Click to collapse
I'm happy to help man, but XDA is also about learning. I think you'll have a greater sense of accomplishment if I don't spoon feed you the solution. Google your carrier, stock, Odin, tar, unroot, etc, etc, and you'll find everything you need(put xda on the end of any search string, that helps weed out the crap). As long as the OP thread and file name matches your phone(sphl710), you will be fine. If you're unsure, post the thread of the file you plan on flashing(yes, through Odin), and I'll confirm for you. Good luck, happy Googling!
Sent from my SPH-L710 using XDA Premium 4 mobile app
Did everything, flashed the tar, and now its stuck in the boot sequence. The screen just says "Samsung" and the notification light is pulsing blue to a bluish green, like it does on boot. It's been doing this for about ten minutes now...what do I do?
Aaron R said:
Did everything, flashed the tar, and now its stuck in the boot sequence. The screen just says "Samsung" and the notification light is pulsing blue to a bluish green, like it does on boot. It's been doing this for about ten minutes now...what do I do?
Click to expand...
Click to collapse
What tar did you flash?
Sent from my SPH-L710 using XDA Premium 4 mobile app
I flashed the tar found here:
http://forum.xda-developers.com/showthread.php?t=1737859
Aaron R said:
I flashed the tar found here:
http://forum.xda-developers.com/showthread.php?t=1737859
Click to expand...
Click to collapse
do you get a pass message or anything? try booting into stock recovery and wiping.
kaos420 said:
do you get a pass message or anything? try booting into stock recovery and wiping.
Click to expand...
Click to collapse
Wipe data/factory reset, okay. Do I wipe cache partition?
Hi guys, sorry if this is stupid. I've flashed ROMs to 3 or 4 phones before this one and didn't have any issues with them, but this time around it doesn't seem so easy. My phone is a virgin mobile galaxy s2 (d710)
My phone has been rooted for a while and my stock ROM started randomly freezing up on me 4-5 times/day, so I finally decided to flash a ROM. The stickied post says to use odin mobile to flash to GB - EL26 Stock w/ CWM then to flash the ROM I want. Any ROM I tried flashing gave a status 7 error and aborted, EXCEPT for one ROM, and on that one I didn't even have working 3G? I believe this thread implied doing it any other way would be a hard brick.
I finally ended up using samsung's official upgrade tool in download mode to flash back to stock ROM, but it would be nice to get a custom on now that I've put time into it.
Can anyone point me in the direction I need to go?
Thanks
EDIT: I'm currently on the 4.1.2 stock ROM
http://forum.xda-developers.com/showthread.php?p=50070702
I'm guessing you're trying to flash a KitKat ROM? Using Mobile Odin and EL26CWM will work when flashing 4.2.2 (and under) ROMs, but not KitKat. You'll need the last Blasphemy 6.6 kernel (just for the updated ClockworkMod), located in Original Development, for that.
In your case, you'll probably want to flash FJ12 or FL26 (if you can find it) modem zips, as you're on Virgin Mobile, and those are ICS Virgin Mobile modems, which you'll need to have working data/internet on Any AOSP ROM (JB modems won't work).
And this guide is assuming you're completely stock JB firmware, not rooted.
Sent from my SPH-D710 using Tapatalk
It looks like I'm on GB28 stock. I think agats caused a soft brick. I'm reflashing back to stock again now....I don't know what's going on with this phone.
Edit: Retried, got it to work this time. Thanks.
Is there a reason why you have to flash one recovery just to move onto another one? Would any recovery work installing any ROM? I'm a bit confused by all these different recoveries, since my last phone only needed one.
InfamousMyzt said:
It looks like I'm on GB28 stock. I think agats caused a soft brick. I'm reflashing back to stock again now....I don't know what's going on with this phone.
Edit: Retried, got it to work this time. Thanks.
Is there a reason why you have to flash one recovery just to move onto another one? Would any recovery work installing any ROM? I'm a bit confused by all these different recoveries, since my last phone only needed one.
Click to expand...
Click to collapse
On this device, recovery comes bundled with the kernel. When you flash a ROM or kernel, the recovery that was on gets overwritten by the recovery that comes with the ROM/kernel you're flashing.
The reason everybody started using EL26CWM (gingerbread kernel) was due to a bug in the stock ICS firmware that was causing some people's devices to be permanently bricked when doing a factory reset.
Status 7 error when flashing is usually due to using a recovery that's too old.
So to answer your question... No, there is no "be-all, end-all" recovery for this device. Sorry [emoji20]
Glad you got it working though
Sent from my SPH-D710 using Tapatalk
Thanks for the help. Now that I'm running CM11, I don't have visual voicemail and it looks like I can't receive MMS.
Serious props to the people that use custom ROMs that aren't driven insane by bugs, I'm irritated by it already.
Know of any fix?
I don't know about visual voicemail... I'm flashed to Cricket and just use the built-in voicemail statusbar notification. Have you tried pushing the apk manually? I'm pretty sure I've seen Virgin Mobile fixes here in the d710 forum.
As far as MMS goes, have you tried messing with the APN's? I don't think MMS will work as-flashed, out-of-the-box for you without modifying them for Virgin.
If you're getting annoyed by bugs, have you given stock, rooted deodexed GB28 a try? When i get the TouchWiz itch, I run deodexed GB28, along with Agat's 1.3 kernel, TD's AIO mod, and Missing Link mod (both found in Themes and Apps of this forum).
I'm currently running Slimbean build 7 (4.2.2) as it's super lightweight, stable, and has good battery-life.
Sent from my SPH-D710 using Tapatalk
Do you know where I could find the voicemail apk?
Also, where can I mess with the APNs/what would work there?
The only reason I want a custom ROM at all is to be on KitKat. It honestly disgusts me a bit that google hasn't standardized versions....I don't get why every phone needs it's own ROM and never gets updated....
Thanks man.
Edit: I did find a MMS fix and visual voicemail all in one zip, but flashing it screwed the phone and I had to restore in recovery.
As far as editing APN's, I use Nova Prime launcher to create a shortcut on my homescreen to access them. Create shortcut to Activities/Settings/APNs and make your edits there.
Have you tried extracting the contents of the zip and manually applying those changes? Sorry but I wouldn't know anything else about configuring for Virgin. Maybe you could ask in that respective ROM thread, as I'm sure there are Virgin Mobile users there that have everything working.
Sent from my SPH-D710 using Tapatalk
Thanks for the ideas, I'm a bit slow sometimes when it comes to android/linux. I pulled the apk out of the zip, installed it, that's working fine. I just need to find a fix for my MMS. I can send but not receive.
Edit: I found a way to open the APN settings using voice dialer, but it's blank and choosing to add one, it does not save.
InfamousMyzt said:
Thanks for the ideas, I'm a bit slow sometimes when it comes to android/linux. I pulled the apk out of the zip, installed it, that's working fine. I just need to find a fix for my MMS. I can send but not receive.
Edit: I found a way to open the APN settings using voice dialer, but it's blank and choosing to add one, it does not save.
Click to expand...
Click to collapse
I had that issue too on cm11. They appear just fine on Liquidsmooth 4.4.4
Sent from my SPH-D710 using Tapatalk
Just for clarification, if I want to flash a new ROM when I'm already on a custom, do I need to use odin mobile to flash back to that GB rom with CWM before I flash the recovery and new ROM? Or can I just wipe and flash new recovery from the one I have now?
InfamousMyzt said:
Just for clarification, if I want to flash a new ROM when I'm already on a custom, do I need to use odin mobile to flash back to that GB rom with CWM before I flash the recovery and new ROM? Or can I just wipe and flash new recovery from the one I have now?
Click to expand...
Click to collapse
If the new recovery you are talking about is safe to flash from...and the one you are currently using is safe to flash from...then you can just reboot recovery and wipe cache and dalvik, then flash new recovery and then reboot recovery. Now you will be on the new, safe, recovery. So do your wipes ( data, cache, dalvik cache and format system ) and flash the rom.
If you want to go the mobile odin way..in case the recovery you currently have cant flash the new recovery you need, in order to flash the rom of choice..which im assuming is kitkat. As it needs the most up to date recovery to flash properly.
Then i have a simple guide you can follow to flash a safe kernel/recovery, in which you can then flash the newer recovery for flashing the rom you have choosen.
Link to guide. Post 5 is what you need to read.
If this sounds complicated or confusing..please post a link to current rom you wish to install and i will read the op and point you down the correct path.
Thanks, I was looking to use either of these. I've had issues with ROMs so far because I'm on Virgin Mobile and lots of stuff is buggy. Not sure which of these will work best:
http://forum.xda-developers.com/showthread.php?t=2298221
http://forum.xda-developers.com/epic-4g-touch/orig-development/rom-liquidsmooth-v3-1-t2803683
I'm not normally confused by rooting/flashing, but I don't understand the whole "safe recovery" thing.
I'm currently on this ROM: http://forum.xda-developers.com/showthread.php?t=2540250
InfamousMyzt said:
Thanks, I was looking to use either of these. I've had issues with ROMs so far because I'm on Virgin Mobile and lots of stuff is buggy. Not sure which of these will work best:
http://forum.xda-developers.com/showthread.php?t=2298221
http://forum.xda-developers.com/epic-4g-touch/orig-development/rom-liquidsmooth-v3-1-t2803683
I'm not normally confused by rooting/flashing, but I don't understand the whole "safe recovery" thing.
I'm currently on this ROM: http://forum.xda-developers.com/showthread.php?t=2540250
Click to expand...
Click to collapse
I see. Im not too familiar with what works with virgin mobile.
But if you can flash a virgin modem and set your apns after a flash.. That will get your data working. I'm at work.. But let me refewsh my memory later about virgin mobile on this device and I'll hit ya back.
Fyi.. I think jdsingle made a virgin mobile rom a while back.
Gil81 said:
I see. Im not too familiar with what works with virgin mobile.
But if you can flash a virgin modem and set your apns after a flash.. That will get your data working. I'm at work.. But let me refewsh my memory later about virgin mobile on this device and I'll hit ya back.
Fyi.. I think jdsingle made a virgin mobile rom a while back.
Click to expand...
Click to collapse
Thanks, I looked for jdsingle and only found posts for 3D Evo I believe; no activity since 2011?
InfamousMyzt said:
Thanks, I looked for jdsingle and only found posts for 3D Evo I believe; no activity since 2011?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=39371960
It was made for JB but it's a start
Sent from my SPH-D710 using Tapatalk
Yeah, I tried that one, it continually crashed my launcher every 3 seconds, had to reflash the ROM. It did give me the voicemail apk I needed though! Really if I could just get flash instructions for going from one rom to another, I'd be set probably.
Have you tried applying the changes and setting permissions in the zip manually, like with Root Explorer?
Sent from my SPH-D710 using Tapatalk
Surj138 said:
Have you tried applying the changes and setting permissions in the zip manually, like with Root Explorer?
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
No, I'm honestly not sure how to do that. Linux's file structure is confusing to me. Granted I'm also having wifi problems on this rom too, it disconnects all the time.
InfamousMyzt said:
No, I'm honestly not sure how to do that. Linux's file structure is confusing to me. Granted I'm also having wifi problems on this rom too, it disconnects all the time.
Click to expand...
Click to collapse
It honestly isn't too difficult at all. All I see in the zip is a new apns-conf.xml (permissions are rw-r-r), 2 build.prop edits, and the deleting of telephony.db located in /data/data/com.android.providers.telephony/databases
Sent from my SPH-D710 using Tapatalk