Hi
One X stuck in bootloop and i can't launch fastboot. My pc can't see phon but Led is lit. I use this rom http://forum.xda-developers.com/showthread.php?t=1562603 and i try this mod's http://forum.xda-developers.com/showthread.php?t=1814785 and http://forum.xda-developers.com/showthread.php?t=1645142
Please Help Me
Why can't you load fastboot? You can't enter the bootloader screen by holding Power button and Vol down button for more than 10 seconds?
Thank so much You have right i must hold Power button and Vol down button for more than 10 sec
Related
My desires volume down button was not working for a ling time. Two days before i flashed a file and it crashed and my phone got stucked in HTC logo. Now i cannot able to go to recovery as my Power and Volume down button is not working. Is there any alternative method to enter recovery other than the usual way. Pls help
Pull battery out then back in then press and hold back button + power
thanks bro..now i can go to recovery...
So I flashed SuperSU in recovery hit reboot and my phones in this dark backlight is on but it wont power off. Im really freaked out because i press down power and it will not power off. all help is appreciated
Connect it to your computer and reboot it via adb fastboot.
Sent from my HTC One_M8 using Tapatalk
Hold power + vol up for several seconds to force a reboot.
But if the phone did not properly reboot after flashing something, you will likely have to do something more than power off or reboot.
While the phone is rebooting (as the screen goes dark, and before the boot splash screen shows), let go of power + vol up, and hold vol down to get into bootloader. From there, see if you can get into recovery.
Now i booted the boot.img file to get out of recovery mode as it wasn't out of that mode
and now i am stuck in white screen with HTC logo and can't even shutdown the device or log to boatloader mode !!
Any help please
Try to hold volume up and power keys for 10 seconds or more,It should restart the phone BUT before the phone turns on and while you see an OFF black screen (You only have 1-3 seconds until your phone turns on again) you should hold volume down and power keys to enter bootloader...
press vol up+voldown +power for 15 sec
After black screen
Press voldown + power
Then flash boot image again (fastboot)
Hi guys! So my aunt´s HTC Desire 816 had a problem with the power button. But I tried to shut it down by pressing VOL UP + Power button down to check if it really was the problem. It actually did shut down but it got into fastboot mode. Okay i went into the fastboot tab and pressed restart. It started up but it was in safe mode. So I shut it down but in the normal way, so power down and pressed on restart. But after I started it again it, again, went into fastboot mode. But this time I can´t restart it because the phone just wont get into the fastboot tab. The VOL UP button works but I can´t get into any other tabs like "show barcode" or "recovery" and so on.
BUT if I press the power button for 12 seconds the screen gets black but it just re-opens in the fastboot mode.
Anyone can help?
hello friends i have a Problem my htc one m8 stuck on White htc Screen i dont can boot in the bootloader menu what i can do now ? My dvice is rooted , unlocked and it have the trwp installed. When i press power + vol-down Buttons nothing Comes and the vol-down key works.
greets marvin
power + vol down doesn't work if the phone is already on (even "stuck" on the boot splash screen). That button combo only works when powered off, or during a reboot.
Do the following:
1) Hold power + vol up to force a reboot. You may need to hold the buttons for a minute or so, in the current "stuck" condition.
2) When the screen goes black to reboot, but before the HTC logo screen appears (you have about 3 seconds) let go of the power and vol up buttons, and only hold the vol down button. Do not let go until you see the bootloader screen.
3) If you fail to get into bootloader, it's always due to getting the timing wrong. You either started pressing vol down too late, or let go too early. Just repeat Steps 1 and 2 above, until you get it right.