Is creating an exfat partition necessary these days? - Sprint Samsung Galaxy S III

Recently changed to a 32gb class 10 micro sd the other day and noticed in the latest TWRP that the option to format isn't there any more. Haven't partitioned a memory card since my og evo and was curious if things changed.

twrp format
twrp and cwm wont recognize memory cards in exfat format. it will only recognize ones in fat32 format. I used a program to convert my 64gb card to fat 32. There is a post on android central with link to the program. Its free too. Hope this helps.
munsterrr said:
Recently changed to a 32gb class 10 micro sd the other day and noticed in the latest TWRP that the option to format isn't there any more. Haven't partitioned a memory card since my og evo and was curious if things changed.
Click to expand...
Click to collapse

Related

My arc cannot recognize formatted SD cards, help?

I've tested two sandisk class 4 SD cards.
If I format it to fat32 and partition the space(to use link2SD), my phone refuses to use the SD card and says it's not there. I use minitools for partition and the official SD card maker software for formating. I did everything by the book and tried multiple options(different labels, ntfs, ext2, etc.)
A fresh, unallocated space card works perfectly fine however.
My phone is rooted and unlocked bootloader running softMIUI rom with a modfied power saving blend kernel.
Please help! This is confusing the hell out of me.
Was looking at your post and I decided to grab a few of my MicroSD card 1gb, 2gb, 4gb, 8gb and 16gb....
I formated all of them on windows .... right click format, all default settings... Fat32. These are MicroSD cards that have had information on them... they all run fin on my arc. All different brands.
This leads me to believe that there's possibly either something wrong with the MsD card or the reader on the phone.
fluxgfx said:
Was looking at your post and I decided to grab a few of my MicroSD card 1gb, 2gb, 4gb, 8gb and 16gb....
I formated all of them on windows .... right click format, all default settings... Fat32. These are MicroSD cards that have had information on them... they all run fin on my arc. All different brands.
This leads me to believe that there's possibly either something wrong with the MsD card or the reader on the phone.
Click to expand...
Click to collapse
Solved it
Did this:
Changed the partition id to this:
"0*06 fat16,greater than 32 mb"
and made the second partition fat32 as well.
Removed the 100mb linux swap file partition I created....not sure if that was necessary.

SanDisk Ultra 64GB microSDXC Class 10 Only $54.51

Found this really nice deal on Amazon.
Just ordered one
http://www.amazon.com/gp/aw/d/B007WTAJTO/ref=redir_mdp_mobile?redirect=true
I'd say be careful. If you check some reviews, I heard when they sell out, they replace it with Class 6.
Sent from my SGH-T999 using xda app-developers app
You don't have to worry if you buy from Amazon. If you buy from a third party make sure it says "fulfilled by Amazon", you'll get super saver shipping and it will be exactly as described.
It's Sold by Amazon and
Fulfilled by Amazon,
so I'm not too worried about it.
If they ship something other than what I ordered, I'll just return the item
I've always had good experiences with Amazon, as long as the Items are Sold by Amazon directly, or if the Seller's Return Policy is the same as Amazon's.
I read through All 12 pages of Amazon reviews.
This Is a Class 10 Card.
The 4th reviewer was only stating his opinion. Every Reviewer (111 of 112) received a Class 10.
And the 4th reviewer most likely also received a Class 10.
I'm actually using this card right now. Ordered it Saturday, got it Wednesday. Works like a champ.
From Amazon, of course. The price was cheaper than ebay, with none of the risk.
Bought this card last night...hope it works in a 16 GB verizon s3...
I would live to get one of these but I'm in Canada. Anyone want to order one for me?
Sent from my SGH-I747M using xda app-developers app
got this card today and it does not work...does anyone know if you need to do anything special?
bearklaws said:
got this card today and it does not work...does anyone know if you need to do anything special?
Click to expand...
Click to collapse
What ROM are you using? Did you format the card?
senergy rom, and yes i formated it. i also transferd from old card to new card and still a no go.
went into setting /then to storage and tried to mount it that way also. it might be bad.
bearklaws said:
senergy rom, and yes i formated it. i also transferd from old card to new card and still a no go.
went into setting /then to storage and tried to mount it that way also. it might be bad.
Click to expand...
Click to collapse
I can't see pics at work if you uploaded a pic with that, but does your computer read it? Does your phone say its corrupt? If everything says it's corrupt you can probably go to control panel -> hardware and do a full format (25/30 minutes). If nothing recognizes it at all, it's bad and you should request a replacement/refund.
had a hard time formatting the very first time. I am going to do a full format now, if that doesnt work, its going back. Thanks for the help.
Tried everything i know how...i am sending it back...thanks
Just received mine, and installed it in my S3.
Working Perfectly
This is what I did:
- I removed my SanDisk 32GB Class 6 card from my S3 after 'Unmounting' it.
- I saved All data on the card to a Folder on my pc
*the 32GB card is FAT32
- I installed the 64GB card into my S3, Formatted it, and Removed it after 'Unmounting' the card.
I transferrerd All data onto my New 64GB Card via my pc
- I installed the 64GB card into my S3 and Everything is Working Fine
*the 64GB card is exFAT
The 64GB card had 59.47GB Usable memory beforing transferring my folders over to it.
Biker1 said:
Just received mine, and installed it in my S3.
Working Perfectly
This is what I did:
- I removed my SanDisk 32GB Class 6 card from my S3 after 'Unmounting' it.
- I saved All data on the card to a Folder on my pc
*the 32GB card is FAT32
- I installed the 64GB card into my S3, Formatted it, and Removed it after 'Unmounting' the card.
I transferrerd All data onto my New 64GB Card via my pc
- I installed the 64GB card into my S3 and Everything is Working Fine
*the 64GB card is exFAT
The 64GB card had 59.47GB Usable memory beforing transferring my folders over to it.
Click to expand...
Click to collapse
Nice...I could not even get my phone to see it...I did the same thing you did also...just a bad card,waiting for another.(thanks for the write up.)
bearklaws said:
Nice...I could not even get my phone to see it...I did the same thing you did also...just a bad card,waiting for another.(thanks for the write up.)
Click to expand...
Click to collapse
Your card arrived in the cardboard/blister packaging?
Don't know what the odds are of getting a defective card, taking into consideration the Seller, packaging, etc. But hopefully your replacement card will have no issue.
Have you tried to install the card into another device, if one is available?
Biker1 said:
Just received mine, and installed it in my S3.
Working Perfectly
This is what I did:
- I removed my SanDisk 32GB Class 6 card from my S3 after 'Unmounting' it.
- I saved All data on the card to a Folder on my pc
*the 32GB card is FAT32
- I installed the 64GB card into my S3, Formatted it, and Removed it after 'Unmounting' the card.
I transferrerd All data onto my New 64GB Card via my pc
- I installed the 64GB card into my S3 and Everything is Working Fine
*the 64GB card is exFAT
The 64GB card had 59.47GB Usable memory beforing transferring my folders over to it.
Click to expand...
Click to collapse
+1
I did exactly the same (my old 32GB FAT32 card to new 64GB exFAT one).
And everything is going fine...
Sent from Tapatalk 2
key_r said:
+1
I did exactly the same (my old 32GB FAT32 card to new 64GB exFAT one).
And everything is going fine...
Sent from Tapatalk 2
Click to expand...
Click to collapse
Sounds good to me
My S3 now has a capacity for 96GB of frigg'n
memory
That's a lot of memory!
does a 64gb card HAVE to be exfat? or can i make it fat32?
diz_dizane said:
does a 64gb card HAVE to be exfat? or can i make it fat32?
Click to expand...
Click to collapse
You can but you can't format it using the Windows formatter. I used easeus software to format mine so that the card would be visible in clockwork recovery. exFAT is not supported there. Had a bit of a scare after formatting with the HP utility. Repartitioned in easeus but it would only read on the computer and it would FC system apps on my phone. Figured out that the partition needs to be primary not logical (what easus defaults to for new partitions) to work on the phone. All you have to do is pop the card in the computer, open easeus and format fat32. Don't mess with partitions
Sent from my SPH-L710 using Tapatalk 2
nacron said:
You can but you can't format it using the Windows formatter. I used easeus software to format mine so that the card would be visible in clockwork recovery. exFAT is not supported there. Had a bit of a scare after formatting with the HP utility. Repartitioned in easeus but it would only read on the computer and it would FC system apps on my phone. Figured out that the partition needs to be primary not logical (what easus defaults to for new partitions) to work on the phone. All you have to do is pop the card in the computer, open easeus and format fat32. Don't mess with partitions
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
I didn't realize that Clockwork didn't read exFAT.
I just did a backup to my Internal storage cause as you say, CWM didn't see the ext. SD card.
I'm gonna reformat the card now.
Thanks.
Is this what I need to use to convert to FAT32?
http://en.kioskea.net/download/download-380-easeus-partition-master
I'm going to do the following:
- format 64GB card in my S3, which will delete all data
- install Easeus onto my pc
- put 64GB card into my pc
- open Easeus Utility, and format 64GB card to FAT32.
- reinstall Folders previously saved on my pc from my 32GB FAT32 card to the newly formatted 64GB card
- install card into my S3, and I should be good to go?
UPDATE:
- Formatted 64GB card to FAT32
- CWM recognizes card
All is well in the neighborhood

[Q] 64GB SD card unformattable in AOSP & AOKP

I have had my GS3 for a little over a month, rooted and had no issues, I installed another rom with no issue. Unfortunately when I tried to install a CM10 or AOKP rom, each say my ext sd card is damaged and needs to be formatted. I try to format, but it hangs and then just quits without completing the task.
I have tried formatting to fat32 on my PC, downloaded EaseUS Disk utility to format, but none seem to work. When I restore back into the previous rom, it still says damaged and then I can format and start over only in that non AOSP/AOKP rom.
I boot into recovery when the AOSP/AOKP roms are loaded and it wont even mount or format in recovery either.
Any ideas?
stretch0r said:
I have had my GS3 for a little over a month, rooted and had no issues, I installed another rom with no issue. Unfortunately when I tried to install a CM10 or AOKP rom, each say my ext sd card is damaged and needs to be formatted. I try to format, but it hangs and then just quits without completing the task.
I have tried formatting to fat32 on my PC, downloaded EaseUS Disk utility to format, but none seem to work. When I restore back into the previous rom, it still says damaged and then I can format and start over only in that non AOSP/AOKP rom.
I boot into recovery when the AOSP/AOKP roms are loaded and it wont even mount or format in recovery either.
Any ideas?
Click to expand...
Click to collapse
I think I read somewhere that in CM10/AOKP that it won't read/understand exFat very well.
So, formatting to Fat32 is definitely the way to go.
When I used some other programs it would say the same thing... that my card was damaged and had to be fixed.
I had a heck of a time finding a program that would do it for me on my 64gb sdxc SanDisk card!
But I found a free one called GUI Fat 32 Format that actually worked.
Click this link and it will start to download:
http://www.ridgecrop.demon.co.uk/guiformat.exe
It didn't work immediately, for me at first, but after a few tries it actually worked very well.
I think that once you get it into Fat32 all of your problems will go away. Hope so anyway.:cyclops:
Let us know if it works!
This seems to have corrected the issue, finally
stretch0r said:
This seems to have corrected the issue, finally
Click to expand...
Click to collapse
Glad it worked for you!
Sent from my SPH-L710 using xda app-developers app
I had a similar issue... I flashed an AOSP ROM on my phone n it corrupted my sd card and wouldn't format. before formatting I went back to a touchwiz ROM and it still said it was a bad sd card and needed to format I ended up formatting my card in my phone and lost all my data. I put music on my sd card and removed the sd card from my phone before flashing another AOSP ROM. After I installed another AOSP ROM I re-inserted the sd card and it again said it was bad and needed to be reformatted...
So my question is...How can you use a 64gb sd card on an AOSP ROM...I'm back on touchwiz for now. Sd card works fine.
Does formatting the sd card in your phone format it to exfat and not fat32?
Sent from my SPH-L710 using xda app-developers app
iomega311 said:
I think I read somewhere that in CM10/AOKP that it won't read/understand exFat very well.
So, formatting to Fat32 is definitely the way to go.
When I used some other programs it would say the same thing... that my card was damaged and had to be fixed.
I had a heck of a time finding a program that would do it for me on my 64gb sdxc SanDisk card!
But I found a free one called GUI Fat 32 Format that actually worked.
Click this link and it will start to download:
http://www.ridgecrop.demon.co.uk/guiformat.exe
It didn't work immediately, for me at first, but after a few tries it actually worked very well.
I think that once you get it into Fat32 all of your problems will go away. Hope so anyway.:cyclops:
Let us know if it works!
Click to expand...
Click to collapse
Wait, so you're saying that AOKP/CM10 don't have the necessary drivers to handle exFAT formatted sd cards?
Do you remember where/how you came upon this information? Was this issue particular to 64gb SDXC cards vs smaller SDHC cards or maybe to certain classes of cards?
I find this shocking, but I can't say it isn't unfounded.
I have a 64gb uhs-1 sandisk card coming from newegg in a few days, so I'm obviously concerned.
Any insight you could provide is greatly appreciated!
Hey guys... after doing some fooling around I've found out some (useful) information for people with 64 gb sd cards...
1. When you format an sd card while its inside your phone it will format it to exFat.... which is fine if you plan on only staying on TW ROMs. This format is not compatible with TWRP Recovery and has given me issues (causing me to loose all my data on my card) just by flashing an AOSP ROM
2. If you use the program posted in the second post(thanks iomega311) you can format your sd card to Fat32 and it will now work on TW ROMs, TWRP, and AOSP ROMs.
Hope this helps for anyone with SD Card Questions/issues.
In my opinion... Never program sd cards on phone... Always use a computer. Especially if you want it done right!!!!
kdepro said:
Wait, so you're saying that AOKP/CM10 don't have the necessary drivers to handle exFAT formatted sd cards?
Do you remember where/how you came upon this information? Was this issue particular to 64gb SDXC cards vs smaller SDHC cards or maybe to certain classes of cards?
I find this shocking, but I can't say it isn't unfounded.
I have a 64gb uhs-1 sandisk card coming from newegg in a few days, so I'm obviously concerned.
Any insight you could provide is greatly appreciated!
Click to expand...
Click to collapse
CM 10 which all the AOSP roms are based off does not support exFAT since it is a proprietary format and they don't want any legal trouble. The best way to format a 64GB gard is with GUI formatter
What allocation size did you guys use? Just got my 64GB SDXC and need to format it so that I can use it on CM10.

CWM instead of TWRP

I have a 64GB sdcard that TWRP won't recognize. What is the easiest way to transition to CWM?
Same here. ..I was wondering the same thing
Sent from my SPH-L900 using xda app-developers app
Just format the card to Fat32. I used a program called fat32format. Took 2 minutes and was very easy. My card is still super fast and I havent had any issues. I used CWM on my evo, but TWRP is now my preferred recovery.
Sent from my Note II
I am still curious why there is no CWM thread for the sprint note II? anyone know why?
JD
I think this will delete all of your data on your card if you reformat to fat32. My 64gb sd card was already formatted to fat32 and I changed it to exfat because I thought it is supposed to be better for 64gb cards. So I copied all 48gb of info on my computer, formatted to exfat then copied my data back on my card. This took almost 3 hours to transfer all of the data back to my card. It was a slooooow process. Now I have TWRP recovery and now I find out that you cant even flash roms from your extsdcard! So if I reformat back to fat32, will it delete everything, and will I have to go through that slow process again?
roofus3000 said:
I think this will delete all of your data on your card if you reformat to fat32. My 64gb sd card was already formatted to fat32 and I changed it to exfat because I thought it is supposed to be better for 64gb cards. So I copied all 48gb of info on my computer, formatted to exfat then copied my data back on my card. This took almost 3 hours to transfer all of the data back to my card. It was a slooooow process. Now I have TWRP recovery and now I find out that you cant even flash roms from your extsdcard! So if I reformat back to fat32, will it delete everything, and will I have to go through that slow process again?
Click to expand...
Click to collapse
Yes. Sorry.
i used fat32gui (google it)..and formatted my 64gb sdxc card to fat32..and now twrp DOES see my card...it only took 10 seconds...

[Q] New 64GB micro SDXC card not working in Galaxy S4

I just purchased a new 64GB SanDisk SDSDQX-064G-A46A micro SDXC card from Newegg:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820171773
The card works fine in my S3 and in my PC, but it will not mount in my S4, not even from Clockwork Recovery. Both my S3 and S4 are running the stock ROM, but the S4 is rooted where the S3 isn't. I went to the local T-Mobile store and while they didn't have an S4 to test my new card in, they did have a Note 3 which mounted my new card just fine. Additionally the 32GB card that was in the Note 3 mounted just fine in my S4.
What is going on here?
Format the card to Fat32 on your PC and see if that works.
dynospectrum said:
Format the card to Fat32 on your PC and see if that works.
Click to expand...
Click to collapse
There is no option to format to FAT32, only exFAT. Additionally, from what I read here Windows cannot format FAT32 volumes lager than 32GB.
http://www.ntfs.com/exfat-comparison.htm
A bit more reading and it seems the kernel that removes the SetUID restriction causes issues with exFAT formatted cards. Thankfully the fix is easy, just needed to install this exFAT module from recovery. The entire process is described here.
re: fat32 formatter
typoknig said:
There is no option to format to FAT32, only exFAT. Additionally, from what I read here Windows cannot format FAT32 volumes lager than 32GB.
http://www.ntfs.com/exfat-comparison.htm
A bit more reading and it seems the kernel that removes the SetUID restriction causes issues with exFAT formatted cards. Thankfully the fix is easy, just needed to install this exFAT module from recovery. The entire process is described here.
Click to expand...
Click to collapse
Here is a free windows utility which will format any size sdcards using FAT32.
Give it a try. Here is the direct download link: http://www.ridgecrop.demon.co.uk/download/fat32format.zip
Good luck!
typoknig said:
There is no option to format to FAT32, only exFAT. Additionally, from what I read here Windows cannot format FAT32 volumes lager than 32GB.
Click to expand...
Click to collapse
There's plenty of software to format the 64gb card to Fat32. I'm running a 64gb card in Fat32 format right now.
☞ Sent from here☜???
shouldnt need to format to fat32 i have 2 diff sandisc 64g cards in tmobile s4's and they are exfat and work fine.. are you sure you are on stock kernel.. if you change it lots of kernels do not work for exfat.
I found guiformat made mine work. Same card and I was having issues, too.

Categories

Resources