Develop Bugs

[Q] Please Help! Looping

Ok... here's the deal. I just decided to switch roms finally to see what is new out there. I had been running an old version of Uber Kingdom. Here is the problem I am having. It is boot looping. Relatively simple problem to fix usually. But wait, there's more! It is boot looping in every single rom I install. Sometimes it won't boot to clockwork properly either and I have to pull the battery. Is there someway I can fix this? Or is this a hardware problem (which I kind of doubt)? I just don't understand what the heck is going on. I have been flashing different roms left and right for the past few hours trying to get this thing to stabilize. Sometimes it will boot up into the rom, I will get mostly through the google accounts setup, and then it will restart, and then loop. Other times it won't even get past the white incredible screen, and then sometimes it will make it into the rom splash screen. I have attempted to install CM7 nightly, Uber kingdom, and Synergy so far. I can flash the new rom, I can mount the SD card in clockwork, but then it begins to loop again as soon as I leave clockwork.
Let me know if you need any other information.
Is there a way to just completely redo EVERYTHING, clockwork, rom, everything, just to make sure I have a nice clean slate?
Thanks a ton for reading through this novel. I am extremely frustrated.
~Will
PS, I may not get back to this thread until morning. I have to get to sleep for work. Sorry if I don't respond right away to information requests. Thanks again!

If you can mount the SD card, download the stock RUU from www.dougpiston.com, put it on the root of the SD card named exactly PB31IMG.zip, and boot into hboot to install it. Your phone should be restored to stock, a clean slate.

Tried a different SD?
Sent from my ADR6300 using XDA Premium App

How are you downloading and flashing the ROM? I had this problem when trying to do everything through Rom Manager. Even trying to flash in recovery with a ROM downloaded through ROM Manager would loop.

Update
Well, I was just getting ready to flash the original RUU when I tried one last time to restore my old Uber rom setup and it worked (whereas the last 3 times of doing exactly the same process didn't). It stopped looping at least, even though I am still running the same rom I was before. I think tonight I am still going to attempt to flash the RUU anyway and start over anew.
To answer the questions before, No, I did not try a different SD. I didn't know it could make that much difference. Still on the original one that came with the phone.
As the downloading and flashing process goes, I was downloading direct from the XDA forums on my laptop, then transferring the files via USB. I have never really liked using the Rom Manager. It cuts me out of the XDA loop and I don't get to see all the bleeding edge discussions, etc...
So I will try to flash everything new tonight, and then post my results for anyone who is curious. Thanks for the help guys!

[Q] how to resolve epic 4g custom rom flash fail boot loop?

ok im kind of a bit of a noob to rooting but ive been at it a few months, i tried to flash a custom rom today (first time) http://forum.xda-developers.com/showthread.php?p=17235986 everything went fine i did all the wipes x3 and followed the instructions and it makes it to the revolution boot screen then loops back to clockwork recovery mod so before i bring it back to stock with odin in a few hours, is there ANY way to resolve this?

Could be a # of problems. Ill try to help after I get some sleep and get t work. I just didn't want you to feel stranded.

ive decided to go ahead and use odin and try to install another custom rom later. maybe ill have some feedback by then

now i just have a phone picture an exclamation point and a computer showing up

ok nvm i managed to get it back to stock. i do want to figure out what went wrong to begin with though.

Probably a bad flash or a bad download.... re download it and try again.... Does cwm show any hint that something went wrong with the installation?

At a quick read is says it auto converts you to EXT4 so as long as that went OK it may be what Theduce said. It could also be bad data. You may have to do a factory data reset before flashing if you have everything backed up and can restore your apps and stuff. Sometimes a reflash when you are in the boot loop will work. As a tester I often have to factory data reset after getting boot loops. Probably why my SD card is littered with backups.

i used titanium backup and backed everything up before i used odin, afterward i checked my sd card and it looks like everything is still there, how do i get it back? also if i cant get my backup back can someone give me a link to a one click root file my computer keeps reading the ones i have already as bad so it wont even run them
EDIT: ok so after reading yet another guide on flashing roms it appears i did do everything right, probably a bad rom like everyones guessing also, should i even try to reinstall this rom or just try and find another one? (any suggestions? im on EC05)

sephiroth009 said:
i used titanium backup and backed everything up before i used odin, afterward i checked my sd card and it looks like everything is still there, how do i get it back? also if i cant get my backup back can someone give me a link to a one click root file my computer keeps reading the ones i have already as bad so it wont even run them
EDIT: ok so after reading yet another guide on flashing roms it appears i did do everything right, probably a bad rom like everyones guessing also, should i even try to reinstall this rom or just try and find another one? (any suggestions? im on EC05)
Click to expand...
Click to collapse
What rom? the file u have I would download a new copy of "said" rom check md5 and I bet u will find that the first rom zip file u have it bad.
As for TB and restoring ur apps and data. Just go in TB and restore user apps
Sent from the Drivers Seat of my Suby txting and Driving doing 100MPH+ in a school zone! Ha.

You will have to root again, download Titanium from the market and restore user apps. Redownload the ROM if you are dead set on trying that one. Once you know how to get everything working again after a failed flash the hard part is over. Just an inconvenience when stuff blows up.

kennyglass123 said:
You will have to root again, download Titanium from the market and restore user apps. Redownload the ROM if you are dead set on trying that one. Once you know how to get everything working again after a failed flash the hard part is over. Just an inconvenience when stuff blows up.
Click to expand...
Click to collapse
Way ahead of you XD. Rerooted, figured out titanium backup, and installed syndicate rom last night =P. E.R.A was just a bad rom/download I guess. As for zrom it was syndicate obviously >_>

odin is your best friend and its always good to make sure you back everything up

HELP! I rooted my phone and not touchwiz is gone

Hello,
Last night I rooted my device using this (http://forum.xda-developers.com/showthread.php?t=1265429) method and file from zedomax and everything worked great except when I booted my device there was a yellow triangle with a black “!” in it. I figured that just indicated the device was rooted or running a 3rd party kernel so I didn’t worry about it.
Today I launched my camera app and it failed to load the interface but showed the image from the camera momentary then crashed back to the home screen. I restarted my device and when the device restarted it was very slow and unresponsive and after unlocking it my live wallpaper was gone replaced with the last background I used before selecting a live background a couple weeks back. No icons or widgets loaded and I am unable to open the settings tray. The only things I am able to do with the phone is pull down the notification bar, respond to text messages, adjust the volume and hold power to restart the phone. All of which are very slow and delayed.
When I connect the device to my computer windows is no longer able to load the drivers and Kies is unable to connect with the device. I am not sure what caused this or how to resolve this issue so any advice or known fixes would be fantastic! I am unable to get to clockwork mod to restore my backup and I am unable to get to Kies or the phone settings to do a factory reset so I really don’t know what to do they were supposed to be a last resort and now I don’t even think I can do them. I am an experienced techie but I am new to android and this is the first device I have rooted so any advice would be great no matter how basic it may be.
UPDATE: I just connected the phone via USB to my laptop at work and it was able to discover and install everything it needed to connect with the phone. I am installing Kies now so at least there is hope of a factory restore, although I really hope it doesn't come to that!

Boot into download mode and flash the stock eg30 tar file from crawrj.
Sent From My Evo Killer!!!

Thanks Already started doing that waiting for it to download now

Still no touchwiz... great!

Try flashing a stock rom via clockworkmod.

efarley said:
Still no touchwiz... great!
Click to expand...
Click to collapse
You can root again and restore your backup, or go to this website www.lostandtired.com (midnight roms blog) click on android development and download and flash the sprint bloat and TW restore zip. Hope that helps.

I flashed the stock rom which didn't change anything so then I used clockworkMod to do a factory reset which ended up trapping me into a boot loop. I could use Odin to flash new roms but the device would never go past the 4G logo
I ended up taking the device back to Best Buy and since the loading screen showed the stock rom and they couldn't get past the 4G logo I just had to say it wasn't rooted and they gave me a new one.
I would love to know if anyone has any idea of what went wrong here so that I can feel comfortable rooting again. Also if anyone has some basic articles handy that teach basics of rooting that would be great, I didn't even know about clockwork mod until after I had this problem so knowing things like that earlier would have helped a lot I think. I'll be spending the weekend looking up everything I can find on the subject so any reading you guys can suggest would be fantastic.

efarley said:
I flashed the stock rom which didn't change anything so then I used clockworkMod to do a factory reset which ended up trapping me into a boot loop. I could use Odin to flash new roms but the device would never go past the 4G logo
I ended up taking the device back to Best Buy and since the loading screen showed the stock rom and they couldn't get past the 4G logo I just had to say it wasn't rooted and they gave me a new one.
I would love to know if anyone has any idea of what went wrong here so that I can feel comfortable rooting again. Also if anyone has some basic articles handy that teach basics of rooting that would be great, I didn't even know about clockwork mod until after I had this problem so knowing things like that earlier would have helped a lot I think. I'll be spending the weekend looking up everything I can find on the subject so any reading you guys can suggest would be fantastic.
Click to expand...
Click to collapse
If you a clockwork and "stock rom" you were still rooted...Doing a factory reset will send you into bootloop when rooted. Trying to flash other roms on a bootloop is not going to work. You need to have grabbed a backup such as Zedo has on his post and put the backup in clockwork folder on your phone. Then flash that in CWM. Would of brought you out of bootloop to a stock rom with his kernal. Now you can flash Roms and kernals or could of flashed crawf or anyone else FULL stock rom and been back to stock kernel and rom and not rooted.

dallastx said:
If you a clockwork and "stock rom" you were still rooted...Doing a factory reset will send you into bootloop when rooted. Trying to flash other roms on a bootloop is not going to work. You need to have grabbed a backup such as Zedo has on his post and put the backup in clockwork folder on your phone. Then flash that in CWM. Would of brought you out of bootloop to a stock rom with his kernal. Now you can flash Roms and kernals or could of flashed crawf or anyone else FULL stock rom and been back to stock kernel and rom and not rooted.
Click to expand...
Click to collapse
Ohhhh that's what happened! Awesome thanks. I will be much better prepared with backups out the wazoo this time haha.
Now if only I could figure out why Touchwiz died in the first place hmmm....

I hope you can figure it out, just postin here to say that when I saw this thread, it reminded me of the thread over in the EVO forums about the guy who claimed that sprint removed his Sense from his phone.

Khilbron said:
I hope you can figure it out, just postin here to say that when I saw this thread, it reminded me of the thread over in the EVO forums about the guy who claimed that sprint removed his Sense from his phone.
Click to expand...
Click to collapse
haha SPRINT removed it?! So that person thinks sprint monitors every device and has a team of techies on staff to hack your phone and brick it if you break their rules?... yeah that totally makes more sense than a file got corrupted when you were messing with the kernel.. some people maybe shouldn't be rooting their devices in the first place haha

please help! phone freezes after every app lounched- after trying to install cwm ...

hey guys!
i will realy appriciate any help on this one:
i am in a light panic attack as i might bricked my first phone..
today i have updated my t989 to ics 4.0.4 via kies, and then rooted it.
of course the root was so i can flash a rom. i chose to try cm9.
any ways, in order not to get the phone stuck in boot loop, i have tried to install the touch version of the cwm recovery.
i did it through the zip on sd option.
the version i used was: CWM6013-TOUCH-CM9-recovery (file size 4.201)
it seemed ok at first.
but then when i retsrted the phone, i noticed that every app i am trying to launch takes forever to respond (about a minute)...
i have tried to do factory reset and it did not help - the phone was sluggish even on the first setup screens..
now i am in the process of downloading the stock version again, to unroot. is this the way to go? did i miss something?
please let me know what info i can provide so you will be able to help me.
again, and i can't say it enough: every help will be very much appreciated. so, did i brick my phone?
thanks!
cvbn

Dude wrong section.

cvbn52 said:
hey guys!
i will realy appriciate any help on this one:
i am in a light panic attack as i might bricked my first phone..
today i have updated my t989 to ics 4.0.4 via kies, and then rooted it.
of course the root was so i can flash a rom. i chose to try cm9.
any ways, in order not to get the phone stuck in boot loop, i have tried to install the touch version of the cwm recovery.
i did it through the zip on sd option.
the version i used was: CWM6013-TOUCH-CM9-recovery (file size 4.201)
it seemed ok at first.
but then when i retsrted the phone, i noticed that every app i am trying to launch takes forever to respond (about a minute)...
i have tried to do factory reset and it did not help - the phone was sluggish even on the first setup screens..
now i am in the process of downloading the stock version again, to unroot. is this the way to go? did i miss something?
please let me know what info i can provide so you will be able to help me.
again, and i can't say it enough: every help will be very much appreciated.
thanks!
cvbn
Click to expand...
Click to collapse
What all did you do to install the ROM?

Something like this happened to me on my original Galaxy S when I updated it via Kies to the new stock version. Everything was running extremely sluggish. I don't remember what I ended up doing to fix it but I most certainly did not keep the stock update on there. I rebooted it and let it sit for about 30mins and then rebooted it again and tried using it. It was a bit better but still not good so I just flashed another Rom and then it was lightning quick.
The good news is you didn't brick it if you can still boot up and run stuff. I'd suggest updating your recovery to TWRP as that seems to be the preferred one now a days, it's the one I've been using to flash countless Roms without any problems, and most Devs recommend it. Apart from that, follow the install instructions precisely and you shouldn't have a problem. To be sure, after upgrading your recovery to TWRP, you could do the wipes (cache/dalvik/factory reset/system) 2-3 times before installing your new Rom, that seems to help some people coming from previous troublesome Roms.
I've noticed a few problems people seem to have around here come from the recovery, mainly those not using TWRP and/or using some form of outdated or beta CWM. Hopefully you can fix your problem, I know first hand how awful that sluggish feeling is. Good luck!

[Q] Help! Softbrick while going to CM10 or Lifeless

Hey all,
I'm trying to install either CM10 or the Lifeless ROM (links here and here: http://forum.xda-developers.com/showthread.php?t=2189788 and http://forum.xda-developers.com/showthread.php?t=2083320). I had tried CM10 in the past but it didn't work that well. Thought I'd give it a second go, and, failing that, I'd try out this "lifeless". Sounded like a cool idea.
Background: phone was already rooted, and as I mentioned, i did actually get this CM10 rom to load sucessfully in the past, though I wasn't fully satisfied with the results. i figured this time I'd give it more time to sort out any issues I found. Failing that, I was going to go with the Lifeless ROM (which, I have decided I'm going to do over an unoffical CM10, I love that installer, if I can ever get it to work!). Anyway, here's what happened: I formatted Cache, Data, Davlik, and System just to be safe (same as I did last time). I tried flashing the CM10 ROM along with GApps. I got a hang on boot... just a black screen after the LG screen disappeared (yes, i forgot to do the TeenyBin flashes at the end... more on that later). So, I took this as a sign to try Lifeless, and I installed it successfully. Still a hang on boot... just the LG screen, and I let it go for a good half hour or more. Decided to do a restore of my backup (always do backups!), and... same thing. Even with the stock backup it would hang on boot.
So, I did some digging and I remembered about the TeenyBins! So I flashed the original one, just as I had last time I got CM10 to work. No dice, and even worse, TWRP was changed somehow (I am not sure if it changed versions, or what, but the menus were different), and now for some reason it couldn't even see my backup, even though the file browser in TWRP shows it clearly in the TWRP folder. So, I tried to install CM10, and flashed every one of the three TeenyBins offered on that page. The first one, of course, did nothing. The second, gave me a Google logo instead of LG, and I can actually see the choices on the bootloader screen now (I assume becuase it's based on the Nexus?), but again, nothing. The third (ZVBin) gave me a stuck LG logo for 5 minutes, then a few screen flashes and a kernel panic! Now I'm utterly confused.
EDIT: After the kernel panic, I restarted into recovery, and after the ZVBin flash, i have TWRP 2.4.4.0. It now sees my backup! I'm attempting to run the backup to see if I can at least get my phone back! If this doesn't work, I'll re-flash the Original TeenyBin... and then go from there. I thought about flashing the modems as the link from the CM10 page says, but before I get into changing even MORE, I'll defer to a professional's suggestions, haha.
I've exhausted just about every single option I can think of, I hope someone out there can help me! I would love to just get my phone to boot in some way so I can flash my backup file right back on. Any ideas on what might be causing this?
Thanks!

Sucess! Kinda. With the ZVBin, I was able to restore my phone, and get it to boot. And for some reason, the restore took my /sdcard folder and moved it into sdcard/sdcard0... don't know what that's about.
Any suggestions on what might have happened, and why Lifeless didn't want to work? Does it have soemthing to do with the TeenyBins I had to flash to make CM10 work? What do the TeenyBins replace? Sounds like the boot partition. Is there a way to get a plain one, with just TWRP 2.5 and the LS970 stuff it needs?

Ok, last post for the night, I think... tried to install Lifeless again, and it just fails, right off the bat. it says "Error flashing zip" with no explanation.

VDub2625 said:
Ok, last post for the night, I think... tried to install Lifeless again, and it just fails, right off the bat. it says "Error flashing zip" with no explanation.
Click to expand...
Click to collapse
If it reads error or fail something in that nature it still flashes fine for lifeless ROM, he posted something bout on the first page so go ahead and enjoy

RubbleTea said:
If it reads error or fail something in that nature it still flashes fine for lifeless ROM, he posted something bout on the first page so go ahead and enjoy
Click to expand...
Click to collapse
No, it didn't even get to the flash stage, just when I swipe to flash, it instantly failed.
But, i got it working! Not sure why or how, but I re-downloaded the Lifeless ROM and it worked with a fresh file. The file I had on there originally worked at first, but something must have happened to make it not work afterwards.
However, I do still have the Google boot-up screen and the Bootloader screen shows me menu choices, unlike every other Optimus G. I'm also still on TWRP 2.4.4.0. I hope it's not a problem. And maybe my expirences could help enlighten others,or maybe someone can help explain why exactly I went down this road, haha. I'd love to understand how the bootloader works on this particular phone, because it seems different from my old HTC.
Sorry to seem a little skittish with this post... but I was figuring it out as I was going along, and understood about half of it, haha. Just typing it out I think helped me to figure out what I was doing.

VDub2625 said:
Ok, last post for the night, I think... tried to install Lifeless again, and it just fails, right off the bat. it says "Error flashing zip" with no explanation.
Click to expand...
Click to collapse
I just quoted you here cause your last entry was long anyways here's a flash able twrp 2.5,http://androidforums.com/boost-mobi...ry-twrp-2-5-touch-recovery-cwm-flashable.html just flash in your recovery!

VDub2625 said:
No, it didn't even get to the flash stage, just when I swipe to flash, it instantly failed.
But, i got it working! Not sure why or how, but I re-downloaded the Lifeless ROM and it worked with a fresh file. The file I had on there originally worked at first, but something must have happened to make it not work afterwards.
However, I do still have the Google boot-up screen and the Bootloader screen shows me menu choices, unlike every other Optimus G. I'm also still on TWRP 2.4.4.0. I hope it's not a problem. And maybe my expirences could help enlighten others,or maybe someone can help explain why exactly I went down this road, haha. I'd love to understand how the bootloader works on this particular phone, because it seems different from my old HTC.
Sorry to seem a little skittish with this post... but I was figuring it out as I was going along, and understood about half of it, haha. Just typing it out I think helped me to figure out what I was doing.
Click to expand...
Click to collapse
Well now I know I need to try that second teenybin... I miss having that Google bootloader screen and the menu options I wonder if that is the only way to get it?
Sent from my Lifeless Optimus G