Related
AT&T Galaxy S3
Mac OSX 10.8
I know I can get my device back, I'm just not sure how. I successfully rooted using CASUAL, no problems there. Got the normal root applications installed, did the Clockwork backup, everything was great.
I then decided to try a custom ROM - the Cyanogen 10.1. It downloaded fine, and I selected to also install Google Apps, then it rebooted and the Cyanogen boot screen with the spinning circle came up. However, this lasted way longer than I thought it should, so I looked it up, and what I got from the research is that I had the wrong gapps on there.
So, I followed the instructions in this thread (same problem as me), and wiped the system. However, I believe I used the wrong list item, and now everything I had is gone. I can't boot from recovery because it doesn't exist, and when booting into CM I just get the same error message that setup has stopped working. I thought maybe I could put a new ROM on the sd card or phone harddrive and boot from that, but both are inaccessible through USB on my Mac.
I can get it into ODIN mode (where it says "Downloading... Do not turn off target!"), which I'm thinking is what I want, and I have Heimdall installed and it runs and recognizes my device, but I cannot for the life of me find a tar.gz file to use.
If anyone can offer any sort of help, I would super appreciate it.
chazbot7 said:
AT&T Galaxy S3
Mac OSX 10.8
I know I can get my device back, I'm just not sure how. I successfully rooted using CASUAL, no problems there. Got the normal root applications installed, did the Clockwork backup, everything was great.
I then decided to try a custom ROM - the Cyanogen 10.1. It downloaded fine, and I selected to also install Google Apps, then it rebooted and the Cyanogen boot screen with the spinning circle came up. However, this lasted way longer than I thought it should, so I looked it up, and what I got from the research is that I had the wrong gapps on there.
So, I followed the instructions in this thread (same problem as me), and wiped the system. However, I believe I used the wrong list item, and now everything I had is gone. I can't boot from recovery because it doesn't exist, and when booting into CM I just get the same error message that setup has stopped working. I thought maybe I could put a new ROM on the sd card or phone harddrive and boot from that, but both are inaccessible through USB on my Mac.
I can get it into ODIN mode (where it says "Downloading... Do not turn off target!"), which I'm thinking is what I want, and I have Heimdall installed and it runs and recognizes my device, but I cannot for the life of me find a tar.gz file to use.
If anyone can offer any sort of help, I would super appreciate it.
Click to expand...
Click to collapse
Your recovery shouldn't be affected by a wipe (unless you flashed something over it) as ROMs don't flash recovery, therefor vol up + home + power should get you in it. If you success to, You should be able to mount through recovery.
As for Heimdall, it just got S3 support (last week I believe), therefor it might not be easy to find a stock file for it. That being said, if you have access to any Windows pc, that'd be the easiest solution here (using Odin).
Yes, I can still get into the recovery menu, but when I use "backup and restore>restore" it says No files found. Is there anything I can do to just get a working OS running? Or am I just doing it totally wrong, I'm new to the rooting stuff. The Windows computer will be my last resort haha.
BWolf56 said:
Your recovery shouldn't be affected by a wipe (unless you flashed something over it) as ROMs don't flash recovery, therefor vol up + home + power should get you in it. If you success to, You should be able to mount through recovery.
As for Heimdall, it just got S3 support (last week I believe), therefor it might not be easy to find a stock file for it. That being said, if you have access to any Windows pc, that'd be the easiest solution here (using Odin).
Click to expand...
Click to collapse
Yes, I can still get into the recovery menu, but when I use "backup and restore>restore" it says No files found. Is there anything I can do to just get a working OS running? Or am I just doing it totally wrong, I'm new to the rooting stuff. The Windows computer will be my last resort haha.
chazbot7 said:
Yes, I can still get into the recovery menu, but when I use "backup and restore>restore" it says No files found. Is there anything I can do to just get a working OS running? Or am I just doing it totally wrong, I'm new to the rooting stuff. The Windows computer will be my last resort haha.
Click to expand...
Click to collapse
Windows pc is definitely the easiest option here but you try mounting your SD from recovery, redownload the ROM and Gapps you wanna use, put them on your device and flash them after a factory reset.
If you wiped your SD card, it's normal that you don't have a backup anymore.
BWolf56 said:
Windows pc is definitely the easiest option here but you try mounting your SD from recovery, redownload the ROM and Gapps you wanna use, put them on your device and flash them after a factory reset.
If you wiped your SD card, it's normal that you don't have a backup anymore.
Click to expand...
Click to collapse
It's aaaliiiiiiive! Grabbed an extra micro SD I had, threw Cyanogen 10.1.0 RC4 on it, and installed it just fine. Now updating to RC5. My only question now is how to get Google Apps on there. Does this need to be done beforehand, or can it be done after?
chazbot7 said:
It's aaaliiiiiiive! Grabbed an extra micro SD I had, threw Cyanogen 10.1.0 RC4 on it, and installed it just fine. Now updating to RC5. My only question now is how to get Google Apps on there. Does this need to be done beforehand, or can it be done after?
Click to expand...
Click to collapse
You usually flash the Gapps right after flashing the ROM, before rebooting.
P.S.: fully reading the instructions helps before flashing
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
You usually flash the Gapps right after flashing the ROM, before rebooting.
P.S.: fully reading the instructions helps before flashing
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Gotcha, sorry about that. Thanks for all the help good sir. This is actually way faster than my stock ROM, I'm pretty stoked on it, Google Apps or not.
chazbot7 said:
Gotcha, sorry about that. Thanks for all the help good sir. This is actually way faster than my stock ROM, I'm pretty stoked on it, Google Apps or not.
Click to expand...
Click to collapse
No need to apologize. Glad you got it back up! And it was mostly to keep you from making similar mistakes in the future
Sent from my SGH-I747 using xda app-developers app
also one thing you need to know
First boot after you flash will always take longer than normal. After that, it's fine
Like I'm sure this topic hasn't come up before, but I've searched for hours and I'm probably just making things worse. I also just accidentally deleted this post halfway through. It's too late and I'm too tired and I have no working phone.
Bought an SGH-I747 on E-Bay. Got a Straight Talk SIM card kit, activated it, so far so good.
Rooted it with CF-Auto-Root. Worked pretty well, took a lot of reboots, upgraded the SU from the Play Store and it got rid of Knox. So far so good. Got everything all set up the way I like it. Happy.
It was running 4.4.2. I'm assuming it was the release prior to the November 12th OTA release, but I can't say for sure.
Phone downloaded and installed an upgrade automatically. Now, it won't boot. I get the SAMSUNG logo, then the Samsung Galaxy S III logo then nothing.
I retried the CF-Auto-Root, no change.
I booted into recovery (volume up, home and power on), did factory reset, no change.
Started looking around for a way to return it to stock. Found an upgrade43.zip file somewhere (I'm sorry I can't find where I got that now). Put it on the sdcard card and tried installing it with the recovery and it fails part way through.
At this point, I think I probably need to completely overwrite everything with something stock. I just don't know how to do that. I see posts on such subjects but they all have warnings that make me think I'm going to totally brick the phone, so I'm hoping someone can point me the right way. I'm not all that Android savvy, as you can tell.
Help.
Since your phone was running 4.4.2, do not attempt to flash any ROMs using that attempt to downgrade your bootloader to anything prior to 4.4.2.
Try this to get your phone up and running:
download the latest CM11 for the d2lte and save it to an external SD card: https://download.cyanogenmod.org/?device=d2lte
dowload the latest tar.md5 version of Philz Touch for the d2lte from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
boot phone in download mode, open Odin 3.07, do not check anything except f.reset.time, flash Philz via PDA box, remove USB cable when you see the word Reset appear in the status window, remove battery, replace battery, boot into recovery, format system, Dalvik, data, and cache, flash cm11, and reboot.
Thank you for your reply. There are a few things in there I don't quite understand, but I think I can figure it out.
I was going to attempt this...
http://forum.xda-developers.com/showthread.php?t=2658486
In fact, I did attempt it with TWRP last night after I posted here and new I still wasn't going to sleep. I kept getting an error about a bad ZIP file.
Is that stock restore a bad idea?
Do not attempt to flash an older bootloader. The mjb bootloader is from 4.3 and attempting to flash it could hard brick your phone.
I suggest doing what I suggested so you can confirm the bootloader and modem installed on your phone.
OK. Thanks. Probably a good thing I couldn't get it to work then.
Thank you so much. I have a working phone again. Now I just have to get it all set back up the way I like it.
I have to say, and it's probably words straight from the devils mouth, that I kind of wish I could have restored the Samsung stock software. It's just what I'm used to. But I will take what I can get.
A few questions. I like having root. But root is what got me in trouble in the first place. Is this going to be rooted now, or will I have to do that or am I better off just leaving it alone.
Second, I'm probably going to have questions since this is so different than what I'm used to (like I already can't find the Play store). Where is the best place to ask?
If you want root, one of the easiest ways to get it is to flash supersu from your custom recovery. Most ROMs are pre-rooted.
Many custom ROMs do not include Gapps. Just download and install the Gapps version for your ROM.
If you like the TW look, flash a TW-based ROM. Check out the development threads for different ROMs.
here is a thread for Q's that has some pretty good/friendly helpers on it if you need.
http://forum.xda-developers.com/showthread.php?t=2257421
"all i can really do , is stay out of my own way and let the will of heaven be done"
How to save in to external SD card
How do you save the file into the external SD card? I am having the same brick issue with my GS3.
To save a file to an external SD card, just put the card into a card reader and save the ROM to the SD card.
So yesterday I was using the Font Installer app on my HTC One M8 (AT&T) and I was trying to delete a font I downloaded. But on accident, I deleted the Clockopia font and Robotto font (two system necessary fonts). So I thought it would be fine, but it wouldn't let me do anything on my phone so I reboooted it. It now will only start in recovery (TWRP) and bootloader. If I try to boot the system, it says I have no OS, and I get stuck on the boot screen. I have wiped the data, and tried everything I could think of. I can't find a way to fix this problem and the phone is not going to work unless I get something done. I am going to the store to buy a MicroSD card for the phone, in case that is a way to help. Please, any help would be appreciated! I am generally new to the rooting world, so this was a dumb mistake, but please help if you can. I have found threads similar to this but none helped because this phone is different so certain ways to fix this won't work. Again, please help if you can!
What ROM are you using? You can try dirty flashing that ROM again. If you're in ATT stock, just download the ruu and run that. It's going to wipe everything on your internal storage, so copy the things you want to a microsd card before you do
The problem is that I already wiped everything, but it says I have no OS anymore. Like I said, I am no pro with this stuff so I basically just have a phone sitting in recovery. I am currently trying to use ADB to load a file to the device but its a whole ROM (hoping that will help put the fonts back where they were) so I can flash it when it's on the phone. When I slide to start the adb sideload, it disconnects and won't pop up in the Device Monitor, but as soon as I stop the sideload I can see all of the files in my computer. So I'm not sure what I can do with this. Thank you for the reply, but I was on Android Revolution HD before I accidentally deleted the font. Now I'm trying to download it again!
Ligammari said:
The problem is that I already wiped everything, but it says I have no OS anymore. Like I said, I am no pro with this stuff so I basically just have a phone sitting in recovery. I am currently trying to use ADB to load a file to the device but its a whole ROM (hoping that will help put the fonts back where they were) so I can flash it when it's on the phone. When I slide to start the adb sideload, it disconnects and won't pop up in the Device Monitor, but as soon as I stop the sideload I can see all of the files in my computer. So I'm not sure what I can do with this. Thank you for the reply, but I was on Android Revolution HD before I accidentally deleted the font. Now I'm trying to download it again!
Click to expand...
Click to collapse
Put the ROM onto your extSD, and flash it in recovery. Your phone will work again.
Hey guys thanks again for the help, I fixed it all with the flashing of a ROM again and I'm now posting this with my phone! You guys helped really quick, I appreciate it!
Long story short, I haven't done any of this stuff for a long time.
I did stuff here: .teamandroid.com/2016/03/08/update-tmobile-galaxy-note-2-t889-android-601-resurrection-remix-marshmallow-custom-rom/2/
I followed the instructions but I think where my hiccup happened was for whatever reason, CWM didn't install it's custom recovery system even though it said it had. So I'm stuck at 3e restore. However, in my stupidity and haste, I already wiped the data because I thought I was already in the CWM menu and didn't realize the 3e system would look so similar to the screen shots. Now I can't install the custom roms because they're not signatured, and I can't install a way to bypass the signature because that stuff is also not signatured. The only access I currently have to my phone is now through an ADB Sideload functionality using my PC.
Trying to at least get back to square one, or is there a way I can flash the CWM recovery system from this location?
Thanks for any help, not sure how to proceed from here (phone has no OS on it)
Nevermind, it restored the old OS
EDIT: For future reference and for those wondering what happened, the root didn't take correctly the first time so the CWM didn't flash properly. After verifying the root and updating SuperSU to kill knox, it was no problem. Flashed 100% perfect like it should have the first time. Dumb user error on my part.
****** Would really appreciate some help here...
I've tried to install quick reboot (zips), magik, (zips) and busybox, on 3.4 0-0 twrp, and it won't work to boot to system, still says on this version it cannot mount the system. I don't have the perma-recovery file as I cannot find it online, and nexus root toolkit doesn't download it in the dispensaries, latest version.
Hope I haven't knacked it, i also have some screenshots but it doesn't matter as I cannot access the system itself, unless i am missing something it should just boot back to system, I don't understand what I am doing wrong, or have done wrong. Got the img and everything with it.
That said, the mount storage issue is the only thing red, or wrong in the flash, everything else worked apparently, said it installed without a hitch. Which was different that with the standard NRT downloaded twrp, with supersu, as that didn't work.
It just goes back to twrp constantly, can't boot. Help. Really wish I just waited for a response here first. Also I don't believe this is a bootloop, as it just goes back to twrp not bootloader or anything else, probably wrong.
I have been using this vid from the start: realizing that wasn't doing it, magik and a new bionic busybox zip eventually did the trick on 3.4 0-0 twrp, but it sitll won't boot to system. It is probably something obvious, I have been on this for hours today and yesterday, no luck.
only thing i can think of is something to do with: fastboot flash recovery twrp-3.2.1-0-fbe-4core-bullhead.img
basically i flashed the latest version, i dunno if it's supported by nexus 5x.
thanks. uh just please say it ain't bricked.
Anyone?!
edit:
hi all, after immense pain, stress and struggle to get the thing to mount, and trying everything suggested online, it eventually just like "soft-bricked" or whatever, like it was just perma-stuck on the google screen and wouldn't boot to system. i am guessing it's because after a mistake it wiped the system.
i have managed to flash it back to stock, everything is there, and/or redownloading. no way am i gonna bother again, like if it ain't broke don't fix it at this point that would be foolish thought it was perma broke. i'm gonna get a profressional to do it or something, or to give me one to one support to try it again. in the meantime i am going to learn more about rooting and the NRT and all the fundamentals of that.
if anyone here has advice about this still, or articles where I can read about it online, where to learn etc. I'd appreciate that as well, thanks.
Cam3333 said:
****** Would really appreciate some help here...
I've tried to install quick reboot (zips), magik, (zips) and busybox, on 3.4 0-0 twrp, and it won't work to boot to system, still says on this version it cannot mount the system. I don't have the perma-recovery file as I cannot find it online, and nexus root toolkit doesn't download it in the dispensaries, latest version.
Hope I haven't knacked it, i also have some screenshots but it doesn't matter as I cannot access the system itself, unless i am missing something it should just boot back to system, I don't understand what I am doing wrong, or have done wrong. Got the img and everything with it.
That said, the mount storage issue is the only thing red, or wrong in the flash, everything else worked apparently, said it installed without a hitch. Which was different that with the standard NRT downloaded twrp, with supersu, as that didn't work.
It just goes back to twrp constantly, can't boot. Help. Really wish I just waited for a response here first. Also I don't believe this is a bootloop, as it just goes back to twrp not bootloader or anything else, probably wrong.
I have been using this vid from the start: realizing that wasn't doing it, magik and a new bionic busybox zip eventually did the trick on 3.4 0-0 twrp, but it sitll won't boot to system. It is probably something obvious, I have been on this for hours today and yesterday, no luck.
only thing i can think of is something to do with: fastboot flash recovery twrp-3.2.1-0-fbe-4core-bullhead.img
basically i flashed the latest version, i dunno if it's supported by nexus 5x.
thanks. uh just please say it ain't bricked.
Click to expand...
Click to collapse
issues such as what youve experienced are usually caused by version mismatches. I dont have this device and am unfamiliar with the root process for it, but it shouldnt be too different from any other phone. what is the baseband version of your actual phone?
look at this specific reply in this thread
GUIDE - Fix bootloop with locked bootloader via ADB/Fastboot (Android M, N, O)
Hi, Here is fix for those, who have problem with bootloop on 5X with locked bootloader and OEM unlock disabled. This tutorial works for Beta Android O bootloop too. You will need: ADB + drivers installed...
forum.xda-developers.com