Develop Bugs

New Epic owner question

My brother just got a sprint epic. He wants me to root it and flash a custom rom for him. I have been reading as much as I can and I have downloaded the oneclick root version 3. I have also downloaded the midnight rom 4.0 and 4.1 update. I have a quick question before I start. Does the epic modem need to be flashed with an update before flashing this rom?

Yes, either update it with Odin or the EB13 modem. Zip

What if the Epic I bought is already rooted and I want a different rom or stock? Same thing?
Sent from my SPH-D700 using XDA App

judoka209 said:
What if the Epic I bought is already rooted and I want a different rom or stock? Same thing?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Before you do this, You may want to learn the following terms from the Development area...
Odexed/Deodexed
RFS/EXT4
CWM 3/CWM 2.0.5/6
Reading about these will lead to to a lot of the answers you need to successfully flash a ROM to your brothers Epic.

what version firmware do you have....check in the about phone category on it.
i didnt use odin...i used the samsumg update which was very simple and worked well for me...had no problems updating my phone.
you need froyo to use the 1click root method with clockworkmod3 thats why im mentioning it.
the 1 click method was easy...just make sure you have the rom on your sd card so you can flash it....with that rom you get the kernel whic hyou need as well - it makes it easier since it does it in one step.
make sure you dont reboot the phone after you root but flash the rom first, otehrwise your phone iwl lget stuck and you will have to revert it.

I will wait to do anything until I get some details like what the phone currently has on it.

Here is the phone info:
FW 2.1-update 1
Baseband dk28
kernel 2.6.29
build number sph-d700 eclair di18
hw version d700.0.5
So it would be best to update to EB13 and then download the one click method for eb13 found here:
http://forum.xda-developers.com/showthread.php?t=897612
Then flash the midnight rom?

MrNybble said:
Before you do this, You may want to learn the following terms from the Development area...
Odexed/Deodexed
RFS/EXT4
CWM 3/CWM 2.0.5/6
Reading about these will lead to to a lot of the answers you need to successfully flash a ROM to your brothers Epic.
Click to expand...
Click to collapse
You do know the person you replied to wasn't the OP, and may not even have a brother at all?

Odin vs CWM

Hey guys. Ive been using this forum for a long time. Just recently registered to start actively participating. Ive rooted and used roms before, so i am not completely green.
Anyway i got a sprint samsung epic 4g touch yesterday. I have already rooted once using odin and gone back to stock.
What i cant find anywhere is why certain roms can apparenly be flashed onto the phone with odin and others require cwm. I have not been able to get cwm installed yet.
This is my first post so thanks and please be gentle.
Sent from my SPH-D710 using xda premium

In theory any ROM that can be flashed in CWM can be flashed in ODIN. It just takes different setup work.
In practice, it is easier to flash ROMs through CWM if that is all you are updating.
Personally I only use ODIN if I want to update many different components (for example modem, kernel, and ROM) to a known state as it is more convenient to use a single package.
For day to day stuff usually use CWM.

garradalexanderkiss said:
I have not been able to get cwm installed yet.
Click to expand...
Click to collapse
You may know this already, but easiest way I've found to install CWM is by following the instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=1342728

How to?: GB to cyan9; cyan9 to GB.

I just need a link or some information on how to install cyanogenmod 9 from EL29, I'm currently running Calkulin's EL29 v3.0, and then I was wondering how do I come back from ICS without bricking?
I'd appreciate the response so i don't screw up my wonderful new phone! ^^
Sent from my SPH-D710 using XDA

Always check stickies.
http://forum.xda-developers.com/showthread.php?t=1525495

Nabbu said:
I just need a link or some information on how to install cyanogenmod 9 from EL29, I'm currently running Calkulin's EL29 v3.0, and then I was wondering how do I come back from ICS without bricking?
I'd appreciate the response so i don't screw up my wonderful new phone! ^^
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
To go back to GB just flash the EL26 kernel with CWM through Odin. When rebooting hold power + volume up until it boots into recovery and flash from there.
Sent from my SPH-D710 using Tapatalk 2 Beta-6

FYI - OP on the CM9 page for the rom the very first post has it notated that for the CM9 install guide which is the link that has been posted above. I commend you on being careful but just so you know this forum has more than enough info in it to ensure you do everything correct and minimize your chances of bricking..
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
http://forum.xda-developers.com/showthread.php?t=1525495
http://forum.xda-developers.com/showthread.php?t=1504808
Just a few links which have helped me stay away from issues to date..

nitro_c4 said:
http://e4gtcm.blogspot.com/p/cm9-install-guide.html?m=1
To go back to GB just flash the EL26 kernel with CWM through Odin. When rebooting hold power + volume up until it boots into recovery and flash from there.
Sent from my SPH-D710 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
I've heard to odin just the el26 kernel + cwm and also the whole el26 rom before flashing ICS, more specifically the AOsP variations so which is it? Or which is safer? It would kind of make sense to Odin the whole rom to restore a gb nandroid. There's just so many conflicting methods its cornfuzzling
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
I've heard to odin just the el26 kernel + cwm and also the whole el26 rom before flashing ICS, more specifically the AOsP variations so which is it? Or which is safer? It would kind of make sense to Odin the whole rom to restore a gb nandroid. There's just so many conflicting methods its cornfuzzling
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
No not really conflicting if you look at them slowly. Its basically get back to a GB kernel at the end of the day. They say to odin it since you do not want to or have any other way to get a GB kernel on your phone if you are on ICS. Now you could flash from ICS but that is what people are trying to avoid since it could cause a brick.
Basically: When on ICS
1. Odin a GB CWM recovery(now others have used EL29 and Rogue recoveries as well) I personally use a stock CWM recovery from CM7 and Miui
2. From there you can wipe and flash and do nandroids as normal.
Option: Safest bet
1. One Click Odin your choice of any of the GB stock roms by sfhub
I have used both methods so far with no problems. I had CM9 on my phone then used odin to go back to the recovery used with CM7 and then I nandroid back my UnNamed Rom. I did this a few times without issue. I have never heard of any issues with anyone using any of the above two methods I mentioned. If someone has please inform us

playya said:
No not really conflicting if you look at them slowly. Its basically get back to a GB kernel at the end of the day. They say to odin it since you do not want to or have any other way to get a GB kernel on your phone if you are on ICS. Now you could flash from ICS but that is what people are trying to avoid since it could cause a brick.
Basically: When on ICS
1. Odin a GB CWM recovery(now others have used EL29 and Rogue recoveries as well) I personally use a stock CWM recovery from CM7 and Miui
2. From there you can wipe and flash and do nandroids as normal.
Option: Safest bet
1. One Click Odin your choice of any of the GB stock roms by sfhub
I have used both methods so far with no problems. I had CM9 on my phone then used odin to go back to the recovery used with CM7 and then I nandroid back my UnNamed Rom. I did this a few times without issue. I have never heard of any issues with anyone using any of the above two methods I mentioned. If someone has please inform us
Click to expand...
Click to collapse
I was more confused about whether to Odin(mobileodin) just the kernel + cwm or the entire rom, all the install instructions say Odin kernel with cwm(usually el26) which is what I'm using for ics, I use rogue gunslinger for GB, but then I've seen ppl say to Odin the entire rom before restoring/upgrading/changing roms so i was like
Wtf which is it do I Odin the kernel or the whole rom when i upgrade :-| I've been trying to figure that out for a cpl days b4 I upgrade my AOKP to build 31, cuz I really don't want a paperweight
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
I was more confused about whether to Odin(mobileodin) just the kernel + cwm or the entire rom, all the install instructions say Odin kernel with cwm(usually el26) which is what I'm using for ics, I use rogue gunslinger for GB, but then I've seen ppl say to Odin the entire rom before restoring/upgrading/changing roms so i was like
Wtf which is it do I Odin the kernel or the whole rom when i upgrade :-| I've been trying to figure that out for a cpl days b4 I upgrade my AOKP to build 31, cuz I really don't want a paperweight
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I've searched around and I don't know how to just odin a kernel, so I use sfhubs one-click back to el26 then I use autoroot to install el26 +cwm.
I would like to just odin a kernel and flash from there, but i am unsure of the procedure, do you do this:
phone to download mode and connect to odin, use PDA slot and browse to kernel, hit start or GO or whatever it is, then when it starts to reboot, pwr+vlm up to get into recovery, then get my flash on from there?

I use mobile Odin for the kernel alone but I believe in PC Odin you can just select PDA and choose the kernel. Tar and flash it that way then when it starts to reboot either catch the volume up + power on the splash screen or do like I do and snatch the battery real quick and the boot to recovery, everytime I try to hit it while its rebooting Im too slow
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
I use mobile Odin for the kernel alone but I believe in PC Odin you can just select PDA and choose the kernel. Tar and flash it that way then when it starts to reboot either catch the volume up + power on the splash screen or do like I do and snatch the battery real quick and the boot to recovery, everytime I try to hit it while its rebooting Im too slow
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I havent used mobile odin, but I hear nothing but good things, so I think I am gonna grab it and try it out. That way I wont need to be at a PC to get my flash on.
With mobile odin, do I keep the kernel on my sdcard, same place I put roms and such? And when using mobile odin, if the file is *.tar.md5, do I remove the .md5 from the file name first? Do I use the flash firmware option?

I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..

krook250 said:
I havent used mobile odin, but I hear nothing but good things, so I think I am gonna grab it and try it out. That way I wont need to be at a PC to get my flash on.
With mobile odin, do I keep the kernel on my sdcard, same place I put roms and such? And when using mobile odin, if the file is *.tar.md5, do I remove the .md5 from the file name first? Do I use the flash firmware option?
Click to expand...
Click to collapse
Yea u can keep em in a folder on internal SD that's what I do and just open the location it will find all tar files in that location then just select and follow directions, mOdin works really good its quick and no flash counter in crease or yellow triangle. Its alot easier to flash ics than having to go to the PC cuz u can just Odin el26+cwm kernel boot to recovery and get ur flash on without all the hassle of drivers and connecting a USB etc
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
Yea u can keep em in a folder on internal SD that's what I do and just open the location it will find all tar files in that location then just select and follow directions, mOdin works really good its quick and no flash counter in crease or yellow triangle. Its alot easier to flash ics than having to go to the PC cuz u can just Odin el26+cwm kernel boot to recovery and get ur flash on without all the hassle of drivers and connecting a USB etc
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
sweet thanks, gonna grab the app and go grab the kernel as well. can't wait!!!
If I just cut my 30 min. flashing time down to 10 mins, that means I can flash 3x more, frick yeah!! Now I just need the new cna to drop so I can flash that girl.

wase4711 said:
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
Click to expand...
Click to collapse
My question was for when going back to gb from ics if I needed to Odin the whole rom, I had seen both kernel+cwm only and whole rom and just wanted to make sure if I just flashed the kernel only I'd be OK more for clarification than an actual how to for me since I know how to Odin both, just wanted to make sure I was odining the right things b4 I jumped and landed on a brick after I had seen someone say to Odin the whole rom I wanted to be sure I was doing it right since I had seen both ways mentioned. Its a little more confusing than my damn evo where I'm always on the same recovery no matter what, and a bit scary with the bricks flying around like a construction site filled with monkeys on meth
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
My question was for when going back to gb from ics if I needed to Odin the whole rom, I had seen both kernel+cwm only and whole rom and just wanted to make sure if I just flashed the kernel only I'd be OK more for clarification than an actual how to for me since I know how to Odin both, just wanted to make sure I was odining the right things b4 I jumped and landed on a brick after I had seen someone say to Odin the whole rom I wanted to be sure I was doing it right since I had seen both ways mentioned. Its a little more confusing than my damn evo where I'm always on the same recovery no matter what, and a bit scary with the bricks flying around like a construction site filled with monkeys on meth
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
[email protected] monkeys on Meth!!!
Yeah, flashing with this phone is different from the htc stuff, but once you get the hang of it, its just as easy!

wase4711 said:
[email protected] monkeys on Meth!!!
Yeah, flashing with this phone is different from the htc stuff, but once you get the hang of it, its just as easy!
Click to expand...
Click to collapse
Yea ur post cleared it up for me, just gets confusing when. Theres multiple methods recommended I was 99% sure I just needed to Odin the kernel only but wanted the clarification before I jumped off that bridge, not too comfortable jumping off a bridge when I'm not sure how deep the water is
Sent from my SPH-D710 using xda premium

well, like the asshole who pushed me in the deep end of the pool when I was 12 and didn't know how to swim told me, "figure it out or else", sometimes you gotta just go for it!!
Actually, I am nervous too when I try something new the first time, but, once you figure out who really knows what they are talking about, its easy to just pm them and ask them how they do it..
You obviously know your stuff man, so you will be an expert with this phone in no time!!

I did this going from Blazer 4.1 to CM9 with out any issues.
wase4711 said:
I've done this at least 25 times recently; so easy, I'll post instructions here again.
1. get Mobile Odin(time saver to the max)
2. Get EL26 kernel (TAR version)
3. flash EL26 kernel in Mobile Odin (takes 10 seconds)
4. Boot into recovery(you will have the proper one now!)
5. Flash away
if you do this either coming from A GB rom to ICS, or going back to one, Guaranteed success...
Simple as can be; not sure why this keeps getting asked.....
The kernel is 8.1 mb, which exceeds the attachment size, so I can't post it here, but its all over this forum..
Click to expand...
Click to collapse
Quick question.. I can flash EL26 kernel again in mobile odin and should be able to restore my Blazer backup without any issues, correct? Blazer was backed up using Rogue EL29 kernel. Thanks!

Plus there's 5 android devices in my house all with different flashing methods it gets confusing keeping em all straight, got the evo4g, et4g, kindle fire, MoPho, and a gNote the et4g is the first Sammy I've used with Odin, my first android was an intercrap I mean intercept and it used the patched swupdater instead of Odin, so I'm still getting the hang of this method. I can flash the evo, kindle, intercept and photon blindfolded and drunker than a slut on prom night
Sent from my SPH-D710 using xda premium

Nico^APEX said:
I did this going from Blazer 4.1 to CM9 with out any issues.
Quick question.. I can flash EL26 kernel again in mobile odin and should be able to restore my Blazer backup without any issues, correct? Blazer was backed up using Rogue EL29 kernel. Thanks!
Click to expand...
Click to collapse
yes sir, that is correct!
---------- Post added at 04:03 PM ---------- Previous post was at 04:01 PM ----------
-EViL-KoNCEPTz- said:
Plus there's 5 android devices in my house all with different flashing methods it gets confusing keeping em all straight, got the evo4g, et4g, kindle fire, MoPho, and a gNote the et4g is the first Sammy I've used with Odin, my first android was an intercrap I mean intercept and it used the patched swupdater instead of Odin, so I'm still getting the hang of this method. I can flash the evo, kindle, intercept and photon blindfolded and drunker than a slut on prom night
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I don't know how you keep all that **** straight; in my house, we ALL go with one "brand" of product, just to avoid that nightmare!!
If someone doesn't like it, I tell them that they get no tech support from me if they don't go with "the flow"!

[Q] Coming from OG Evo to E4GT

I purchased this phone yesterday after a great year with my Evo and two with a Hero before that. Even though I haven't posted alot I've been rooting and customizing my phones for years. I was even to the point with the file system and stuff that I would add and remove things from roms before I flashed them so I feel like I know what I'm doing with an Android phone.
This thing is a whole other animal though as far as I'm concerned. I've searched, I've read and I still don't understand half the lingo used here. I don't even know how to ask the questions I want to ask honestly. I hate having to jump through hoops just to flash a ROM.
I am rooted. Baseband is el29, kernel is 2.6.35.14-rogue_ET-1.4.1+ and build is Calkulin 3.0. I installed Rom Manager from the market and got the official Clockwork Mod Recovery because I didn't like the recovery that was put on my phone when I rooted.
So from here with the setup I explained what roms can I just place on my sd card and flash through recovery after a wipe? I don't want downgrade to a previous anything or change a modem or use Odin because I don't know what any of that stuff means and there is no where I can find that it's explained very well.
I appreciate any help that is offered and I know I come off as negative but so far this phone is extremely intimidating to do anything with and I don't want to brick it. I never worried about bricking my Evo cause I'm not sure that's even possible anymore
Sent from my SPH-D710 using Tapatalk

I worked on a friends EVO once and didn't understand half of what you guys had to do to root and flash so the feeling is mutual, lol. First off if you're going to switch to ICS start on the EL26 kernel with CWM. Anything else and you risk a hard brick. Odin is actually the easiest to flash with. Sfhub has Odin one-click that makes it easy as hell.
http://forum.xda-developers.com/showpost.php?p=23478866&postcount=869
And here's a really good how-to: http://forum.xda-developers.com/showthread.php?t=1391732
And download mobile Odin, DON'T use ROM Manager. That will almost certainly brick your phone. Just delete it to be safe.

one of the things you're going to have to get used to with this phone, is that the kernels and recoveries are tied together. Its not like any other android phone i ever used that you could swap out kernels and use whichever recovery you wanted.

You have a Samsung phone now. You are in the promised land. Samsung phones are a lot easier to work with than HTC phones.
Basically any ROM here can be flashed using Clockwork Mod Recovery unless it says otherwise. I'd like to point you over to QBKing77's youtube channel. He has a ton of "how to's" and reviews for a lot of ROMs on the E4GT.
http://www.youtube.com/user/qbking77
I'm sure you'd appreciate that. My family uses HTC phones and whenever they want something done to their phone, I tear up and hope that QBKing77 got an EVO since the last time I needed him.
Also the great thing about Samsung is that if you do happen to brick your phone, Odin will save your life.
If you have any question feel free to PM me or something

You cannot use a GB kernel with an ICS ROM and you cannot use an ICS kernel with a GB ROM.
Coming from stock EL29 you can use the Oneclicks to upgrade to the newer FD ROMs or just flash most through CWM unless they state otherwise.
If you do decide to go ICS(FD24 FD26 etc) and want to go back to GB ROMs, you need to flash the EL26+CWM through Odin(which isn't as complicated as you think) and go right to recovery as the phone tries to reboot, then flash the GB rom.
Seriously check out qbking though, he is the biggest help and his videos are phenomenal. Hope that helps a little.
Sent from my SPH-D710 using xda premium

fearwillkeepus said:
You cannot use a GB kernel with an ICS ROM and you cannot use an ICS kernel with a GB ROM.
Coming from stock EL29 you can use the Oneclicks to upgrade to the newer FD ROMs or just flash most through CWM unless they state otherwise.
If you do decide to go ICS(FD24 FD26 etc) and want to go back to GB ROMs, you need to flash the EL26+CWM through Odin(which isn't as complicated as you think) and go right to recovery as the phone tries to reboot, then flash the GB rom.
Seriously check out qbking though, he is the biggest help and his videos are phenomenal. Hope that helps a little.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Sorry to thread jack. im a new sammy owner from the htc evo line. I know how to flash htc's with my eyes closed, but with sammy im all concerned.
So i have to be connected to PC to Odin flash EL26+cwm then flash the roms/kernels?
I got the phone on sunday, rooted it with one click with EL29 +cwm. can i use that instead of el26?
super confused also...

nzaw4 said:
Sorry to thread jack. im a new sammy owner from the htc evo line. I know how to flash htc's with my eyes closed, but with sammy im all concerned.
So i have to be connected to PC to Odin flash EL26+cwm then flash the roms/kernels?
I got the phone on sunday, rooted it with one click with EL29 +cwm. can i use that instead of el26?
super confused also...
Click to expand...
Click to collapse
You need to used Odin to flash EL26+cwm.tar. However, you do not need a computer, I use mobile odin android app religously. It is definitely worth the 5 bucks. For mobile odin just keep the EL26+cwm.tar on your phone, when you want to leave a rom open mobile odin app, point it to that .tar and flash. Then you will have the best copy of cwm on your phone and can start wiping/flashing any roms, kernals, or modems.

Mastershake725 said:
You need to used Odin to flash EL26+cwm.tar. However, you do not need a computer, I use mobile odin android app religously. It is definitely worth the 5 bucks. For mobile odin just keep the EL26+cwm.tar on your phone, when you want to leave a rom open mobile odin app, point it to that .tar and flash. Then you will have the best copy of cwm on your phone and can start wiping/flashing any roms, kernals, or modems.
Click to expand...
Click to collapse
Thanks !!!!
Last noob question.... I cant find the tar, i only see .exe files and zips to have it flashed in CWM......
Edit: Found it!, but i have 2 files one i found that was StockCWM-EL26.tar.md5 which is like 8megs, but i did d/l SPH-D710.EL26_CL839620_ROM_ROOTED-sfx.exe, and extracted it via 7zip, then found the 400 meg .tar... which one should i use?
Btw, thanks for your help!

MeWarning said:
I worked on a friends EVO once and didn't understand half of what you guys had to do to root and flash so the feeling is mutual, lol. First off if you're going to switch to ICS start on the EL26 kernel with CWM. Anything else and you risk a hard brick. Odin is actually the easiest to flash with. Sfhub has Odin one-click that makes it easy as hell.
http://forum.xda-developers.com/showpost.php?p=23478866&postcount=869
And here's a really good how-to: http://forum.xda-developers.com/showthread.php?t=1391732
And download mobile Odin, DON'T use ROM Manager. That will almost certainly brick your phone. Just delete it to be safe.
Click to expand...
Click to collapse
SORRY JUST WANT TO REPEAT SOME GREAT WORDS... DO NOT USE ROM MANAGER... that is all

So say I wanted go from Calk's gb to his ICS, if I make a nandroid of the gb rom then install the ICS one and don't like it for some reason I can't just nandroid back?

Jakeup96 said:
So say I wanted go from Calk's gb to his ICS, if I make a nandroid of the gb rom then install the ICS one and don't like it for some reason I can't just nandroid back?
Click to expand...
Click to collapse
You can nandroid right back! You will have to have a kernel that will let you use CWM such as FD02 or EL26 to get to recovery for the nandroid.
Sent from my SPH-D710 using xda premium

Thanks for all the helpful tips and links. I too am switching from the OG EVO to the Galaxy S2 tomorrow and was concerned about flashing. I feel better now.

davidboyd said:
Thanks for all the helpful tips and links. I too am switching from the OG EVO to the Galaxy S2 tomorrow and was concerned about flashing. I feel better now.
Click to expand...
Click to collapse
Any additional questions, feel free to PM me.
Sent from my SPH-D710 using xda premium

Thanks for all the help but I'm strongly considering returning this phone. I've read till my head hurts and the most common words I see here is brick. I don't want to take that chance. How anyone could think dealing with an Evo is worse than this I don't understand. With the Evo you put the rom on the sd card, wipe, and flash. No worrying if you have the right modem/kernel/cwm combination. It's a nice phone, but I really regret buying it now. 3g is also slooooooow.

Jakeup96 said:
I purchased this phone yesterday after a great year with my Evo and two with a Hero before that. Even though I haven't posted alot I've been rooting and customizing my phones for years. I was even to the point with the file system and stuff that I would add and remove things from roms before I flashed them so I feel like I know what I'm doing with an Android phone.
This thing is a whole other animal though as far as I'm concerned. I've searched, I've read and I still don't understand half the lingo used here. I don't even know how to ask the questions I want to ask honestly. I hate having to jump through hoops just to flash a ROM.
I am rooted. Baseband is el29, kernel is 2.6.35.14-rogue_ET-1.4.1+ and build is Calkulin 3.0. I installed Rom Manager from the market and got the official Clockwork Mod Recovery because I didn't like the recovery that was put on my phone when I rooted.
So from here with the setup I explained what roms can I just place on my sd card and flash through recovery after a wipe? I don't want downgrade to a previous anything or change a modem or use Odin because I don't know what any of that stuff means and there is no where I can find that it's explained very well.
I appreciate any help that is offered and I know I come off as negative but so far this phone is extremely intimidating to do anything with and I don't want to brick it. I never worried about bricking my Evo cause I'm not sure that's even possible anymore
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
I came from the Hero myself...and my first post in this forum looked much like yours. I even went and installed ROM manager thinking I was doing the right thing...lol
Take your time and read up before you do anything...Odin/mobile Odin is actually very easy to use and the safest, even without the one click files. As with others on here if you need some help feel free to PM.

Jakeup96 said:
Thanks for all the help but I'm strongly considering returning this phone. I've read till my head hurts and the most common words I see here is brick. I don't want to take that chance. How anyone could think dealing with an Evo is worse than this I don't understand. With the Evo you put the rom on the sd card, wipe, and flash. No worrying if you have the right modem/kernel/cwm combination. It's a nice phone, but I really regret buying it now. 3g is also slooooooow.
Click to expand...
Click to collapse
I also recently moved to this phone from the evo. The epic touch blows the evo away in every way possible! There is definitely some studying to be done but its worth it! Once you get the hang of things its a breeze.

Same here. I've had the phone since latter part of December and have not rooted it yet ...mostly because my laptop has the screen of death.But noticed the slight difference in the method in flashing roms on the E4GT. But after seeing some video on that AOKP rom I'm getting antsy and need to get my computer fixed!!
Sent from my SPH-D710 using XDA

Why would you buy a wimax phone if sprint is changing to lte? I would ha even gotten galaxy nexus or waited for another phone just my two cents
Sent from my SPH-D710 using xda premium

Need help updating

Okay so i'm only familiar with flashing on the epic 4g and I just got a E4GT tdy which was already rooted and its on Calkulins E4GT.2.ROM v1.5. The kernel says FD26 with some other letters with it but i doubt important. So yeah I was gonna start with the flashing but i've been reading about people bricking their E4GT and I just wanna be on the safe side and ask how can I update to CM9 or calkulin's 3.0 from this point on? when I go to recovery it just says team rogue's recovery but looks like I can easily flash roms. Just don't want to flash the wrong thing in the wrong provedure and get a brick. Any help will be GREATLY appreciated. Thank You Very Much!!!

y2bangali said:
Okay so i'm only familiar with flashing on the epic 4g and I just got a E4GT tdy which was already rooted and its on Calkulins E4GT.2.ROM v1.5. The kernel says FD26 with some other letters with it but i doubt important. So yeah I was gonna start with the flashing but i've been reading about people bricking their E4GT and I just wanna be on the safe side and ask how can I update to CM9 or calkulin's 3.0 from this point on? when I go to recovery it just says team rogue's recovery but looks like I can easily flash roms. Just don't want to flash the wrong thing in the wrong provedure and get a brick. Any help will be GREATLY appreciated. Thank You Very Much!!!
Click to expand...
Click to collapse
Odin back to el26 with cwm and start over from there would be my advice
sent from my SGS2 running AOKP, eh...

Read the stickies in general, that's why they're there
Sent from my SPH-D710 using xda app-developers app

Venomusdragon said:
Odin back to el26 with cwm and start over from there would be my advice
sent from my SGS2 running AOKP, eh...
Click to expand...
Click to collapse
yeah I read everything.. just trying to be a bit cautious since I was also reading that it's probable to brick e4gt when on an ics rom.. i was able to get my hands on mobile odin so i can just flash the el26 safe cwm from there right?

(1) Grab the stock el29 tar, install the desktop version of odin and drivers on your computer, and verify odin works. Flash el29. This phone is very soft brick happy, but in almost all cases odin'ing back to stock will fix things. So it is good to have them handy.
(2) Find a rom you think you might like and flash it. Only flash roms intended for the epic touch 4g, international roms will brick your phone. Follow any rom specific instructions in the thread. In general, a zip file must be flashed in a custom recovery, a tar file must be flashed in odin, and an exe file must be flashed in Windows. If it is a zip file, be sure you are flashing from a safe recovery. In general, as long as you have the newest version of chris' or agat's recovery, then it has been patched to be safe.
(3) If your phone doesn't boot or work right after the rom flash, repeat step 1
Sent from my SPH-D710 using Tapatalk 2

y2bangali said:
yeah I read everything.. just trying to be a bit cautious since I was also reading that it's probable to brick e4gt when on an ics rom.. i was able to get my hands on mobile odin so i can just flash the el26 safe cwm from there right?
Click to expand...
Click to collapse
Bingo, nailed it
sent from my SGS2 running AOKP, eh...