Develop Bugs

Exercize with your HD

Just tried this cool program on my lunch break run and it works great. And it's free. Just thought I would share.
www.sportypal.com
SportyPal

Thank youuuuu

Does it work?

mcscooby said:
Does it work?
Click to expand...
Click to collapse
are we just tring to build you post count or cant read
does it work
read first post
just tried it out works great
is a good clue

thank you it seems good

thanks for the tip!!!!

Great find, thank you for sharing!

thanks sounds interesting!!

leggoman said:
are we just tring to build you post count or cant read
does it work
read first post
just tried it out works great
is a good clue
Click to expand...
Click to collapse
Thanks for that very useful reply! Despite the original posters claims I was trying to gather the opinions of others before I installed the software on my phone.
Clearly you're either new to the internet or have so much money that you can risk your expensive phone by installing unreliable software.

I also use sportypal, whenever i have a time to go cycling, i always keep record on the track with it, and till now i haven't had a problem with it. Plus now there is a newer version 1.0.2.

kekele said:
I also use sportypal, whenever i have a time to go cycling, i always keep record on the track with it, and till now i haven't had a problem with it. Plus now there is a newer version 1.0.2.
Click to expand...
Click to collapse
Found that new version is 1.0.4 on http://sportypal.com/Download

do i need a data package fo this to work ?

gjpax said:
do i need a data package fo this to work ?
Click to expand...
Click to collapse
what do you meen by data package?
This software is very easy to install, you can do it directly from http://www.sportypal.com, The application starts, acquires satellites connectivity, then you hit the “Start” button when you are ready to get moving. When you finish you need to connect to their web site to upload your exercize and that's it.

gjpax said:
do i need a data package fo this to work ?
Click to expand...
Click to collapse
kekele said:
what do you meen by data package?
This software is very easy to install, you can do it directly from http://www.sportypal.com, The application starts, acquires satellites connectivity, then you hit the “Start” button when you are ready to get moving. When you finish you need to connect to their web site to upload your exercize and that's it.
Click to expand...
Click to collapse
I believe he's asking if he needs the internet/data package from his carrier in order to use this. I believe the answer is no. The GPS in this software doesn't connect to the internet like google maps does.

Aha I understand, I was thinking about the same. The answer is no, you don't need internet/data package

Love this app, I have been using it as well.

thnks for this link. its a great s/w

Thanks looks good

Update
Software update to 1.0.6
http://sportypal.com/Download

Pandemoniumone said:
Software update to 1.0.6
http://sportypal.com/Download
Click to expand...
Click to collapse
Interesting. Will try later at gym

[Q] GPS again

Hello! I tried 9 different roms so far! The GPS takes forever to lock the sattelites signal!!!! What can I do???????

kompressorgpl said:
Hello! I tried 9 different roms so far! The GPS takes forever to lock the sattelites signal!!!! What can I do???????
Click to expand...
Click to collapse
I can't get a lock from gps in the place i'm staying with agps apps cuz none have this area mapped. but when i go in urban areas gps locks in like 10-15 secs. tested with iGO and stock 2.3.3-2.3.4-giopro 1.4-CM 7.1 rc2. so maybe its some hardware problem with your phone.

Ok! Yap. That what i'm thinking...

Mine works fine for a phone. I noticed a 10-15% decrease in signal when using the protective rubber case that might prevent the connction, so I always remove it before using nav programs. Firts I turn on GPS test to monitor the connection process and when it's done i close the app and start the navigation program.

Zaheyu said:
Mine works fine for a phone. I noticed a 10-15% decrease in signal when using the protective rubber case that might prevent the connction, so I always remove it before using nav programs. Firts I turn on GPS test to monitor the connection process and when it's done i close the app and start the navigation program.
Click to expand...
Click to collapse
Hello! I tried everything but no luck... I start to thing that is a hardware problem!
Another thing that i notice ist that with giopro 1.4 the lock is a little bit faster...

kompressorgpl said:
Hello! I tried everything but no luck... I start to thing that is a hardware problem!
Another thing that i notice ist that with giopro 1.4 the lock is a little bit faster...
Click to expand...
Click to collapse
true. its way more faster then the stock roms. it locks in just few secs

Hello,
i think it depends on the settings in gps.conf too. For example you should use european ntp server if you are in europe etc. and you can use an other supl_host - I prefere the one from sony ericsson. But I use a galaxy s with init.d support, hope it can be used for the gio. Please correct me if im wrong.
Sent using XDA App

gsichtl said:
Hello,
i think it depends on the settings in gps.conf too. For example you should use european ntp server if you are in europe etc. and you can use an other supl_host - I prefere the one from sony ericsson. But I use a galaxy s with init.d support, hope it can be used for the gio. Please correct me if im wrong.
Sent using XDA App
Click to expand...
Click to collapse
Hello! And how do i change that?

You can edit /system/etc/gps.conf on your internal storage but it depends on kernel or rom.
Sent using XDA App

gsichtl said:
You can edit /system/etc/gps.conf on your internal storage but it depends on kernel or rom.
Sent using XDA App
Click to expand...
Click to collapse
Ok! i´m using giopro v1.4 - Vodafone - Portugal

I'm sorry, never flashed this rom and i cant have a closer look atm. Search for the file and edit it (you can use es file explorer)
Sent using XDA App

Im having the same problem.. My GPS don't work

Did you try the general GPS-fix via gps.conf?
The thread can be found here:
http://forum.xda-developers.com/showthread.php?t=1239713

Thank you so much for the reply. But who do I do on Galaxy Gio? The instructions is for a different phone...

It works well on my Gio, just take the gps.conf from the example, adapt it to your country and replace the original in /etc folder using root explorer. Your phone needs to be rooted for this, obviously. Don't forget to set the correct permissions.
Sent from my GT-S5660 using xda premium

Hello! I can't edit the gps.conf. So what can i do?

The easiest way is to use the one from the thread mentioned above, edit it on your PC to your preference and then copy it to yout Gio. Rename the old one to gps.bak for safety, and then copy it the edited gps.conf to /etc.
Your Gio needs to be rooted and you need rootexplorer or simolar for this to work.

Try GPS on Cyanogenmod 7.2, on my Gio works fine
Written with Swype Beta on Cyanogenmod 7.2(GT-S5660)

Using http://particle.blurringexistence.net/samsung-gt-s5660/roms
I followed the tutorial here: http://forum.xda-developers.com/showthread.php?t=1239713
I copy pasted everything, fixed permissions (rw-r--r--) and changed COUNTRY and REGION like this:
NTP_SERVER=pt.pool.ntp.org
NTP_SERVER=0.pt.pool.ntp.org
NTP_SERVER=1.pt.pool.ntp.org
NTP_SERVER=2.pt.pool.ntp.org
NTP_SERVER=3.pt.pool.ntp.org
NTP_SERVER=0.europe.pool.ntp.org
NTP_SERVER=1.europe.pool.ntp.org
NTP_SERVER=2.europe.pool.ntp.org
NTP_SERVER=3.europe.pool.ntp.org
My gps still doesn't work, i've been waiting for half an hour for it to find a signal using GPS Status & Toolbox :\

I tried Cyanogen today (7.2) so far so good...

Testing help required!

Hey folks, I've had a report from the Play Store that my app is crashing on Glides, but I can't get a log from the users. If any of you would be so good to test out the function and see if you have issues, and then grab me a log of the crash, I would be really grateful.. Will increase your thanks meter of course.
My app thread is here and the latest release is in post #3
When the app opens there is the option at the top to go to Android TTS settings. Apparently, clicking on this causes a crash.
Thanks in advance
brandall

See below

Looks like photo didnt attach... Trying again
Sent from my SAMSUNG-SGH-I927R using xda premium

Aquethys said:
Looks like photo didnt attach... Trying again
Click to expand...
Click to collapse
Thank you. I'm wondering if the problem is only with stock, unrooted, but there aren't too many of those on XDA..!

brandall said:
Thank you. I'm wondering if the problem is only with stock, unrooted, but there aren't too many of those on XDA..!
Click to expand...
Click to collapse
Indeed. Right when I opened the app it requested su access.
Btw, good work
Sent from my SAMSUNG-SGH-I927R using xda premium

Aquethys said:
Looks like photo didnt attach... Trying again
Sent from my SAMSUNG-SGH-I927R using xda premium
Click to expand...
Click to collapse
Aquethys said:
Indeed. Right when I opened the app it requested su access.
Btw, good work
Click to expand...
Click to collapse
Thank you If root is detected, su access is requested for advanced functions. Full busybox commands by voice are in the making!

I downloaded the one from the appstore and that one is working well as well. Got it to learn my name and tell me the time and toggle WIFI on and off. Working fine so far. Yes it does ask for SU. No crashes so far. Is the beta any different?

No problems here. Runs smoothly and recognizes commands.
Running stock rooted.

Tested it on a used Glide I just bought and haven't had time to root yet. Running stock 2.3.5 that was factory reset a couple of days ago. No problems accessing any menu or sub-menu item. Guess I just haven't had time to put enough crap on it to make it unstable.

dudejb said:
I downloaded the one from the appstore and that one is working well as well. Got it to learn my name and tell me the time and toggle WIFI on and off. Working fine so far. Yes it does ask for SU. No crashes so far. Is the beta any different?
Click to expand...
Click to collapse
Pyho said:
No problems here. Runs smoothly and recognizes commands.
Running stock rooted.
Click to expand...
Click to collapse
oldnoob said:
Tested it on a used Glide I just bought and haven't had time to root yet. Running stock 2.3.5 that was factory reset a couple of days ago. No problems accessing any menu or sub-menu item. Guess I just haven't had time to put enough crap on it to make it unstable.
Click to expand...
Click to collapse
Thanks guys, it's appreciated - strange that the crash can't be replicated - there must be some other issues on the devices that are having problems.
The beta release is still a while away and will contain many more advanced features for full device control by voice. It's strange bug reports like this that slow me down! At least I can move on from this one now.
Thanks again, your thanks meters have increased.
brandall

Maybe the user who posted about the crash removed the Pico service

brandall said:
Thanks guys, it's appreciated - strange that the crash can't be replicated - there must be some other issues on the devices that are having problems.
The beta release is still a while away and will contain many more advanced features for full device control by voice. It's strange bug reports like this that slow me down! At least I can move on from this one now.
Thanks again, your thanks meters have increased.
brandall
Click to expand...
Click to collapse
1 one feature I would love to see is the ability to add something in the calendar via voice. I hear Siri can do that and would love to see that on Android.

Nardholio said:
Maybe the user who posted about the crash removed the Pico service
Click to expand...
Click to collapse
I should have code to catch that and stop the crash - Why I'm even more puzzled that a crash could happen at all....
dudejb said:
1 one feature I would love to see is the ability to add something in the calendar via voice. I hear Siri can do that and would love to see that on Android.
Click to expand...
Click to collapse
This feature is working well on my test devices - it'll make an appearance in a couple of releases time, after I've had chance to test it on multiple users calendars and multiple calendar apps.

Ok I just tested my theory. With Pico TTS uninstalled it tries to open settings, which freezes and FCs, and it dumps you right back in your app. Your app does not crash. Honestly if this is the bug, I'd say it's user error and not your fault.

Nardholio said:
Ok I just tested my theory. With Pico TTS uninstalled it tries to open settings, which freezes and FCs, and it dumps you right back in your app. Your app does not crash. Honestly if this is the bug, I'd say it's user error and not your fault.
Click to expand...
Click to collapse
Good work Thank you. I assume the crash also may extend to the Pico engine (or perhaps any other) having installation corruption of some kind.
Thanks again to everyone who replied and tested, it's really appreciated. I think I can safely say 'not guilty!'.
Cheers
brandall

Xperia S JB (.197,.200 )2G network problem

Ok, here's my problem , i recently upgraded to Jellybean pre rooted .200 version , my bootloader is unlocked, anyway, since i got an upgrade to jb , i am from india , and, it may be due to the new baseband version, my friends cant call me or reach me(GSM only), how should i put this, even when there's full signal level on my phone, my friends cant seem to reach me, and there was no such problem in ics .55 , anyway, this not only happens to calls, also to text messages as well, the message only reaches my phone after several minutes ,after the message has been sent from another phone,but sometimes its normal and heres the interesting thing,if i switch it to 3g signal(WCDMA only) i get it like normally, and because in my home there is little to no 3g signal at all ,i could only use GSM network, so i miss calls from my friends like 5 times a day , they shout at me, "i called you, its unreachable everytime" ,and so forth and so so, so, if theres any way i can solve this problem, like changing baseband (.55 one) if its possible? or any help would be deeply appreciated,

can someone help me with this ?

shyam2010 said:
can someone help me with this ?
Click to expand...
Click to collapse
We are in the same boat, Sony has messed up 2g gprs edge in this 200, 197 release. Maybe we need to wait for India baseband. For now went back to stable gingerbread ftf

dude_creative said:
We are in the same boat, Sony has messed up 2g gprs edge in this 200, 197 release. Maybe we need to wait for India baseband. For now went back to stable gingerbread ftf
Click to expand...
Click to collapse
i have no data connectivity issues, just the network problem, i have 3g and 2g working, but the problem is...well, the one i said before...well thanks for the reply dude !!

i also have same issue in 2g its slow like hell i from india i am back to ics plz solve this problem

uber_cool said:
i also have same issue in 2g its slow like hell i from india i am back to ics plz solve this problem
Click to expand...
Click to collapse
Try setting Google APN in Rom Toolbox and tick Override on mobile. Does the job for me

2g
kubekpop said:
Try setting Google APN in Rom Toolbox and tick Override on mobile. Does the job for me
Click to expand...
Click to collapse
how??? plz guide me

In order to do this you need to be rooted. Then open any root explorer, best would be Rom Toolbox with build.prop editor (Performance->build.prop editor). There you add these values: net.ppp0.dns1=8.8.8.8 and net.ppp0.dns2=8.8.8.4 on the bottom of the opened file or in editor tap "+" and add them via shell.

kubekpop said:
In order to do this you need to be rooted. Then open any root explorer, best would be Rom Toolbox with build.prop editor (Performance->build.prop editor). There you add these values: net.ppp0.dns1=8.8.8.8 and net.ppp0.dns2=8.8.8.4 on the bottom of the opened file or in editor tap "+" and add them via shell.
Click to expand...
Click to collapse
Thanks. will try this one mate

kubekpop said:
In order to do this you need to be rooted. Then open any root explorer, best would be Rom Toolbox with build.prop editor (Performance->build.prop editor). There you add these values: net.ppp0.dns1=8.8.8.8 and net.ppp0.dns2=8.8.8.4 on the bottom of the opened file or in editor tap "+" and add them via shell.
Click to expand...
Click to collapse
I tried but didnt worked On My Xperia s indian version!!
May be i didnt override mobile settings...how to do it??
Sent from my LT26i using xda app-developers app

There's no need. For some ppl it works for some unfortunately not. It needs to be deeper, coz it can establish connection. Now I don't know what is that but I'll keep looking.
PS. You can try to add same DNS on, these are net.rmnet.dns1=8.8.8.8 net.rmnet.dns2=8.8.4.4 And I have given you wrong DNS :/ All four lines should look like:
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
Check if it works But if it works, don't be so happy yet, test it for some hours before being sure - for me sometimes stops working :crying:

kubekpop said:
There's no need. For some ppl it works for some unfortunately not. It needs to be deeper, coz it can establish connection. Now I don't know what is that but I'll keep looking.
PS. You can try to add same DNS on, these are net.rmnet.dns1=8.8.8.8 net.rmnet.dns2=8.8.4.4 And I have given you wrong DNS :/ All four lines should look like:
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
Check if it works But if it works, don't be so happy yet, test it for some hours before being sure - for me sometimes stops working :crying:
Click to expand...
Click to collapse
Thanks for the help but hard luck for me!!
Sent from my LT26i using xda app-developers app

Hope so SONY solves All these bugs in the next release thats coming up

Did any one try these settings with baseband of ics
Sent from my Xperia S using xda premium

i am gonna do this right now and try it !! thanks for your help man !!

shyam2010 said:
i am gonna do this right now and try it !! thanks for your help man !!
Click to expand...
Click to collapse
so solved?
Sent from my Xperia S using xda premium

no,but atleast someone tried to help...and for that, i gave them thanks.. anyway, i dont have any data connectivity problems, 2g data works fine, its the network thats the problem, if i go out of signal range, then it takes a lot of time to get that 2g signal, so have to go manually search for networks everytime, even then, i always miss calls and messages !! i hope the new .211 firmware solves it !!

It didn;t work for me. I installes ROM Editor, set these values to prop file, but same issue persists.
Thanks for suggesting a try.
-Nandki
jinalvora said:
I tried but didnt worked On My Xperia s indian version!!
May be i didnt override mobile settings...how to do it??
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse

kubekpop said:
There's no need. For some ppl it works for some unfortunately not. It needs to be deeper, coz it can establish connection. Now I don't know what is that but I'll keep looking.
PS. You can try to add same DNS on, these are net.rmnet.dns1=8.8.8.8 net.rmnet.dns2=8.8.4.4 And I have given you wrong DNS :/ All four lines should look like:
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
Check if it works But if it works, don't be so happy yet, test it for some hours before being sure - for me sometimes stops working :crying:
Click to expand...
Click to collapse
Nandki said:
It didn;t work for me. I installes ROM Editor, set these values to prop file, but same issue persists.
Thanks for suggesting a try.
-Nandki
Click to expand...
Click to collapse
I tried all the stuff mentioned in this thread & other threads, too. Nothing worked. It happened after installing ICS in my phone. Now I installed GB in my phone hoping it'l resolve my issue. But even after installing previous version, same issue persists. Same is the issue if I install JB in my phone. No network in my phone. It is detecting SIM as it asks for SIM Lock password while starting a phone. WiFi is working fine. But 2g/3G doen't work at all. It shows cross sign on network bars with no signals. Please let me know what may be the issue so that I can try smthng new.
Please help.http://forum.xda-developers.com/images/icons/icon9.gif
-Nandki

[7T Pro STOCK] Permissions issues

Hello,
I need a bit of help on this, my phone has really weird permissions issues. For example, when I want to configure an app for the first time that tells me to go enable notification access and it sends me to the screen where you can toggle notification access for a lot of apps and you activate the access for the app in question, the app doesn't see that you turned the permission on when it is on (double checked). I'll link a YT video I made that shows the issue perfectly. (please take note that this happens on EVERY app that asks for permissions this way)
The video might be blurry due to YT taking its time to process the video in its full HD glory.
https://youtu.be/lPkQYS7XURo
I tried resetting the phone and clearing the dalvik cache to no avail... And I don't know if its related, but both the Facebook app and the Messenger App crash really easily while doing the most mundane stuff (sending an image is often too much). They both have full permissions enabled. Weird, huh ?
If you know how to fix this, don't hesitate to post your method in this thread

Allmightyusfame said:
Hello,
I need a bit of help on this, my phone has really weird permissions issues. For example, when I want to configure an app for the first time that tells me to go enable notification access and it sends me to the screen where you can toggle notification access for a lot of apps and you activate the access for the app in question, the app doesn't see that you turned the permission on when it is on (double checked). I'll link a YT video I made that shows the issue perfectly. (please take note that this happens on EVERY app that asks for permissions this way)
The video might be blurry due to YT taking its time to process the video in its full HD glory.
I tried resetting the phone and clearing the dalvik cache to no avail... And I don't know if its related, but both the Facebook app and the Messenger App crash really easily while doing the most mundane stuff (sending an image is often too much). They both have full permissions enabled. Weird, huh ?
If you know how to fix this, don't hesitate to post your method in this thread
Click to expand...
Click to collapse
That video is in spanish. Some people like me will have no idea what the first screen requested

v.konvict said:
That video is in spanish. Some people like me will have no idea what the first screen requested
Click to expand...
Click to collapse
Hello,
Sorry, I just edited the YT link, now the vid is in english

Hello,
I don't know if it's allowed but I'm desperate soooo... Bump.

Okay i just saw the video. Can you disable notifications during the setup just so that you finish setting up the buds then try again enabling notification access from within the app after finishing setting it up

v.konvict said:
Okay i just saw the video. Can you disable notifications during the setup just so that you finish setting up the buds then try again enabling notification access from within the app after finishing setting it up
Click to expand...
Click to collapse
I tried, it keeps asking for notification permissions and won't go forward. And it does that for other apps that rely on notifications (NotifyEdge for example).

Allmightyusfame said:
I tried, it keeps asking for notification permissions and won't go forward. And it does that for other apps that rely on notifications (NotifyEdge for example).
Click to expand...
Click to collapse
Let me download it as well and see. What version os are you running?

Wierdly its working fine on mine. Am on beta 8 by the way.

I'm on 10.0.9.HD01BA
It's a french phone. I may try to join the beta ^^

Allmightyusfame said:
I'm on 10.0.9.HD01BA
It's a french phone. I may try to join the beta ^^
Click to expand...
Click to collapse
Maybe something wrong with the European firmware. That BA at the end indicates that. Try global firmware. Either stable or beta

Thanks for the advice man, I'll try with the beta and I'll get back to youas soon as possible to let you know and maybe make a psa about EU fw if it's that.

Alright, I'm downloading the beta rn and I'll update you on that ASAP.
Thanks for your time !

Well, no dice, even after the beta install... I'll try wiping everything tonight. I'll keep you updated !

Allmightyusfame said:
Well, no dice, even after the beta install... I'll try wiping everything tonight. I'll keep you updated !
Click to expand...
Click to collapse
Wait before you continue. Do other apps that require notification access give u a hard time besides the notifyedge and bud app that i could try as well to make sure its phone not the app that has a problem

v.konvict said:
Wait before you continue. Do other apps that require notification access give u a hard time besides the notifyedge and bud app that i could try as well to make sure its phone not the app that has a problem
Click to expand...
Click to collapse
I tried to use NotifyBuddy and it has the same issue

Allmightyusfame said:
I tried to use NotifyBuddy and it has the same issue
Click to expand...
Click to collapse
Wierd coz that also definately works on mine. Must be a firmware issue

v.konvict said:
Wierd coz that also definately works on mine. Must be a firmware issue
Click to expand...
Click to collapse
Is there a good stock Android cfw for this device ?

Allmightyusfame said:
Is there a good stock Android cfw for this device ?
Click to expand...
Click to collapse
I am on beta 8 and i have no complaints