Develop Bugs

Help bricked my phone

i flashed an international rom not knowing it wasnt gonna work
now my phone wont boot back up someone please help
is there any way can recover my phone?

Can you get into download mode?
Hold the volume down button, power, and home.
Sent from my SGH-T999 using xda app-developers app

ayeitschris said:
Can you get into download mode?
Hold the volume down button, power, and home.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
nope i tried it.. it wont boot at all

when i plug it into my computer the connection sound goes on but that about it
nothing boots up i cant go into download mode or recovery

Sorry bud, you've hard bricked your device... You're going to need to get it fixed by someone who can JTAG it

adslee said:
Sorry bud, you've hard bricked your device... You're going to need to get it fixed by someone who can JTAG it
Click to expand...
Click to collapse
but the usb connection still reads it through my computer
when i plug it in the red notification light turns on but that it after

What does your computer identify it as?

aNYthing24 said:
What does your computer identify it as?
Click to expand...
Click to collapse
sadly nothing..when i plug it in just the sound
goes on but nothing pops up on my computer

just buy a new device.........
Sent from my Nexus 7 using Tapatalk 2

Its dead. Sorry
Sent from a Galaxy 3759295 light years away.
Thank me if I helped

How long ago did you get the phone...
Call your carrier and tell them that the phone is defective and it was overheating and doesn't even boot up. See what they tell you cuz' they may give you a discounted phone or a brand new... who knows!
If you have been a good customer and tell a good story they may give you a new one!

marcviado said:
but the usb connection still reads it through my computer
when i plug it in the red notification light turns on but that it after
Click to expand...
Click to collapse
Jeez, the guy told you its brick and you still ask the same damn question, your wasting time looking for the answer, IT IS BRICKED....JTAG BUD.

Run kies and see if it recognizes ur device
Sent from my SGH-I897 using XDA Premium App

TheAxman said:
Jeez, the guy told you its brick and you still ask the same damn question, your wasting time looking for the answer, IT IS BRICKED....JTAG BUD.
Click to expand...
Click to collapse
jeez i wanna know where in there did i ask the same question? lol i didnt ask anything besides say that my computer makes a
sound when i plug the phone in

to everyone who tried to help me out thanks
i used my warrenty and ordered a new phone
that will be coming in the mail

I'm glad you got one through the warranty dude. Many people don't have that option and just have to buy another phone or continue to try to resolve it. Your curiosity to see if there is anything else that can be done can annoy some people but this is how everyone learns. Props to you my man, glad you got a replacement.
Can you try something for me? Before you do anything to your phone in the dial pad put in ##rtn# see if it's a refurb and share with us bruh.
Sent from my SGH-T999 using xda app-developers app

not to make op feel bad, but why do people think its ok to flash any rom?

Sorry to hear.

That's what happens when you flash before reading.

G1_enthusiast said:
not to make op feel bad, but why do people think its ok to flash any rom?
Click to expand...
Click to collapse
Better yet why do people think their entitled to a new phone at no cost to them when they ruined it all by themselves?

Bricked (complicated)

My Galaxy s3 is now what appears to be a hard bricked phone. The only response I get is a red light when I plug it in and a bing when I plug it into the usb port. No recognition by the computer though.
This was caused by me trying to flash the kernel to a very common one (siyah) and after it completed successfully I did a reboot, now it won't turn on or go into CWM recovery or basic android recovery.
I've exhausted every possibility I can think of /googled to solve it such as.
1) Taking the battery out
2) Trying to make Odin recognize it
3) Trying to boot into the various recoveries
4) Trying many a different button combos
5) Leaving it to charge for a while
The only think I can think of that I haven't tried is a USB jig.
My question is, what now? Help me, please.

Well your first issue is that we don't have a siyah kernel for the i747. So, yeah.
You might need to try a jig. I if that doesn't work then you will need to send it off to get jtag fixed.
Sent from my SGH-I747 using xda premium

d3athsd00r said:
Well your first issue is that we don't have a siyah kernel for the i747. So, yeah.
You might need to try a jig. I if that doesn't work then you will need to send it off to get jtag fixed.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
+1 with sending the device to jtag
Sent from my SGH-I747 using Tapatalk 2

Since you flashed an i9300 kernel, likely with bootloaders, and it won't do anything you will need to send it off for JTAG repair.

JTag time. You've flashed a kernel not meant for our device.

Thanks guys, I figured that was probably my only option. And I feel really dumb now. I'm used to jailbreaking, rooting it seems, requires you to be much more vigilant.
Thanks again.

kshawn123 said:
Thanks guys, I figured that was probably my only option. And I feel really dumb now. I'm used to jailbreaking, rooting it seems, requires you to be much more vigilant.
Thanks again.
Click to expand...
Click to collapse
I'd say it requires common sense. Don't flash something that's not meant for your phone!

mbc663 said:
I'd say it requires common sense. Don't flash something that's not meant for your phone!
Click to expand...
Click to collapse
ding ding ding
Sent from my SGH-I997 using xda premium

mbc663 said:
I'd say it requires common sense. Don't flash something that's not meant for your phone!
Click to expand...
Click to collapse
Not helpful.
task650-JTag time. You've flashed a kernel not meant for our device.
Helpful

kshawn123 said:
Not helpful.
task650-JTag time. You've flashed a kernel not meant for our device.
Helpful
Click to expand...
Click to collapse
What is jtag and what does it do? Just curious lol
Sent from my SAMSUNG-SGH-I747 using xda premium

Smittyzz said:
What is jtag and what does it do? Just curious lol
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Youtube and research my friend. Nearly can fix any phone no matter how bad you mess it up. Very rare that a JTAG can't fix a phone.

xThe Enforcer said:
Youtube and research my friend. Nearly can fix any phone no matter how bad you mess it up. Very rare that a JTAG can't fix a phone.
Click to expand...
Click to collapse
sure you can't get into download mode? try this? http://forum.xda-developers.com/showthread.php?t=1727443 (that link is for AT&T only)

xThe Enforcer said:
Youtube and research my friend. Nearly can fix any phone no matter how bad you mess it up. Very rare that a JTAG can't fix a phone.
Click to expand...
Click to collapse
Thanks for the reply, shouldn't have been so lazy lol, headed to youtube now
Sent from my SAMSUNG-SGH-I747 using xda premium

Whats the trick for a Hard Brick??

I can get Qhsusb_dload to show up from time to time on my PC when it connects. but I went to try and flash the Slim Rom from the original android section and it bricked my phone. no screen light up or anything. no LED flashing. i just get Qhsusb_dload when i connect to a PC.
What tricks can i do to get odin to see this.

Did you try the 3 button combination ? Volume down, home key?
Sent from my GT-N7100 using xda premium

[email protected] said:
Did you try the 3 button combination ? Volume down, home key?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
yes i did. idk if im doing it right tho.

And power on button,What phone you using?
Sent from my GT-N7100 using xda premium

billard412 said:
removal of moderated material
Click to expand...
Click to collapse
You need an attitude check. This was posted in Q&A, he had a question and needs help. If this was posted in the wrong forum, I could MAYBE see this kind of attitude but not here. You were helpful in giving him a link to get his device repaired, but the rest of it was just uncalled for.
kyhassen said:
I did research and no one gave a straight answer anywhere. i googled countless places. a lot of them said to do these button combinations and none worked. some say the only way to do it is through a jig. as you say Jtag. i do everything the way i usually do it by reading the posts before flashing.. idk what went wrong here.
Click to expand...
Click to collapse
As far as I know, he is right about JTAG being your only repair option. This may sound like an obvious question, but I have seen this happen before. Are you sure you were downloading from the right forum? (i.e. not accidentally downloading a ROM meant for another carrier.)

I'm kind of curious how this happens. Never heard of bricking from simply flashing a rom.
Sent from my SPH-L710 using xda app-developers app

mulhiny said:
I'm kind of curious how this happens. Never heard of bricking from simply flashing a rom.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
If rom is for another carrier or the international version of the S3 (i believe the I9300) then it'll brick it quick.

I thought the i9300 is the sprint version. i had looked it up... but oh well. I did more research i missed one step which may have caused it, or my download corrupted. But my next option is to find someone with a Jtag in my area.

kyhassen said:
I thought the i9300 is the sprint version. i had looked it up... but oh well. I did more research i missed one step which may have caused it, or my download corrupted. But my next option is to find someone with a Jtag in my area.
Click to expand...
Click to collapse
Sprint is the SPH-L710. So yeah.. may have flashed the wrong rom.. Always double check.. and if your in doubt.. ASK! lol

Use a jig. Will boot up into download mode. You need to use Odin and flash stock. Qbking video is really helpful. Good luck.
Sent from my SPH-L710 using xda app-developers app

kyhassen said:
I thought the i9300 is the sprint version. i had looked it up... but oh well. I did more research i missed one step which may have caused it, or my download corrupted. But my next option is to find someone with a Jtag in my area.
Click to expand...
Click to collapse
Yup you flashed the wrong ROM. I had this happen on my Evo 3D, I don't remember which ROM it was but someone had linked to it from the CDMA forum and I took their word for it being a CDMA ROM. It was GSM. Fortunately I was still able to load hboot and loaded clockwork mod via fast boot. I'm sure you've tried going into download mode or recovery a hundred times by now, but one hundred and one wouldn't hurt. Make sure you are pressing the right buttons in the right combination and letting go at the right time. Honestly I think the SIII is a pain to get into D/L or recovery mode. It always takes me a few tries. If you can do that, you won't need to JTAG it. Good luck!
---------- Post added at 10:41 AM ---------- Previous post was at 10:37 AM ----------
smokeadrians said:
Use a jig. Will boot up into download mode. You need to use Odin and flash stock. Qbking video is really helpful. Good luck.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Ah that's right, he has some really nice instructional videos. Here is his YouTube page. I would also suggest looking him up on XDA.
Http://youtube.com/user/qbking77

smokeadrians said:
Use a jig. Will boot up into download mode. You need to use Odin and flash stock. Qbking video is really helpful. Good luck.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
jig wont work its done for. Only hope is jtag

evo4gnoob said:
jig wont work its done for. Only hope is jtag
Click to expand...
Click to collapse
Thats what i was thinking. i cant even get the thing to turn on.

kyhassen said:
Thats what i was thinking. i cant even get the thing to turn on.
Click to expand...
Click to collapse
these guys do wonders http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/

evo4gnoob said:
these guys do wonders http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Click to expand...
Click to collapse
so i have heard. Im gonna look for one near by my area. if not i will use those guys. i have heard they are good form several of you guys here and other sites. thank you. At least i have my Nexus 7 and free txting app lmao. quite a giant cell phone if you ask me...

Q&A is for questions
No one should be vilified for asking a question, in the proper place, after researching - and no one should be made to feel worse than they already do when they've got an expensive paperweight they're trying to resurrect. We were all new once. Have patience and teach - especially to those who really seek to learn from their mistakes.

Bummer! good to see a lot of evo guys making thier way over.
Sent from my SPH-L710 using xda app-developers app

At least the plus side is i got to play stupid and get a replacement for 35$ bucks from sprint. screw that 60 bucks and I get it with in a 2-3 days. this time im gonna make sure i dont flash a i9300 rom lol.... oops

[Q] Phone won't turn on

Hi
My T989 won't turn on
before it won't turn on , i was on odin , failed on a flash.
from this moment it won't turn on , i pull the battery , put it on charge , tried again same ..

Uppp

Have you tried to get back into download mode? That's the only chance you have at this point...

won't go to download mode ... no reply

Looks like its hard bricked if Nothing will turn on, only way to fix would be to send it to jtag repairs, or you can wait for this thread http://forum.xda-developers.com/showthread.php?t=2646310 we are pretty close to unhard bricking both the T989 and T989D we need to find a user with a working T989D

Trozzul said:
Looks like its hard bricked if Nothing will turn on, only way to fix would be to send it to jtag repairs, or you can wait for this thread http://forum.xda-developers.com/showthread.php?t=2646310 we are pretty close to unhard bricking both the T989 and T989D we need to find a user with a working T989D
Click to expand...
Click to collapse
hmmm i see , thank you for the reply
hope you find the solution for hard bricking...

paranoxxx said:
won't go to download mode ... no reply
Click to expand...
Click to collapse
have you tried a usb jig to enter download

Fasted12 said:
have you tried a usb jig to enter download
Click to expand...
Click to collapse
no , didn't tried...

paranoxxx said:
no , didn't tried...
Click to expand...
Click to collapse
most of the time Jigs dont work with Hardbricks, its worth a try, you can make one in under $10.

Trozzul said:
most of the time Jigs dont work with Hardbricks, its worth a try, you can make one in under $10.
Click to expand...
Click to collapse
apart from ebay, a good site where I can buy one ? (international shipping)

Like trozzul said, you can make one cheap if you can solder. Search Google for instructions, then hit up radio shack.
Sent from my SGH-T989 using xda app-developers app

they are overpriced here http://mobiletechvideos.mybigcommerce.com/ but just a idea of what your looking at. they are incredibly easy to make by hand.

Trozzul said:
they are overpriced here http://mobiletechvideos.mybigcommerce.com/ but just a idea of what your looking at. they are incredibly easy to make by hand.
Click to expand...
Click to collapse
yes i see some tutorial its easy , but the jigs are for the phones that can access to download mode ? mine do not acces at all

Actually it forces it into download mode, and resets the flash counter. Doesn't always work but you might get lucky
Sent from my SGH-T989 using xda app-developers app

Fasted12 said:
Actually it forces it into download mode, and resets the flash counter. Doesn't always work but you might get lucky
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
ok thanks , hope it will work...

4.4.2 Hard Brick HELP!!!!

I was running slimkat 4.4.2 decide to try a new kernel and hard bricked my phone!!! Its unresponsive now, if I take out the battery the red light stays on for a few seconds then goes off......my computer wont recognize the usb and I'M stuck!!! I havent a clue what to do now if any one knows how or what I should do please tell me.

Can you get into recovery or download using buttons?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

tallsilver said:
Can you get into recovery or download using buttons?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
If he or she is unable to do this, a JTAG will have to be done and not everyone has that skill set.

I am not sure if a USB jig would work but it may be worth a try before going the jtag route.

audit13 said:
I am not sure if a USB jig would work but it may be worth a try before going the jtag route.
Click to expand...
Click to collapse
if it's a hard brick, the jig won't work.

jig
Not sure if its going to work but I bought a USB jig to try and force download mode,I will post when I get it the out come.

muherd said:
Not sure if its going to work but I bought a USB jig to try and force download mode,I will post when I get it the out come.
Click to expand...
Click to collapse
Please let us know what the outcome is. Thank you.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

codemonkey98 said:
Please let us know what the outcome is. Thank you.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
I will no problem.... It should be here Fri/Mon......If I pull the battery and plug the USB jig in I'm hoping it will work. Like I said I get a red light for about 30 seconds like its charging then it goes out, we'll see I guess.

Jig did nothing......I really didn't know a wrong kernel could mess it up so bad. Can a kernel remove the bootloader completely? I am guessing it can. Next step new phone or send it off.

I had thought about trying the sdcard boot method but I'm guessing if the jig didn't work it won't either?

What kernel did you try? I'm freaking out now since I'm going to install a custom ROM on my cousin's s3 lol

muherd said:
I had thought about trying the sdcard boot method but I'm guessing if the jig didn't work it won't either?
Click to expand...
Click to collapse
I guess jtag should work...