Hey this may sound like a silly question but seeing as i am a new comer to the world of the Epic 4g Touch (previously live in the world of the OG Evo) some of this is a little new to me.
current set up is as follows
baseband version s:d710.10 s.el29
kernal version: 2.6.35.14-rogue_et-1
4.1+
build number : calculins.e4gt.rom.v3.0
i was looking at installing the super galaxy rom but wanted to know if it is safe to flash a rom that is based off of ff11 when im currently on el29.
again only reason i ask is because i could not find mention of this in the op for that rom.
that and i never really had to worry about sow many different builds when i was on my OG Evo. any help would be greatly appreciated.
Mastergrimm28 said:
Hey this may sound like a silly question but seeing as i am a new comer to the world of the Epic 4g Touch (previously live in the world of the OG Evo) some of this is a little new to me.
current set up is as follows
baseband version s:d710.10 s.el29
kernal version: 2.6.35.14-rogue_et-1
4.1+
build number : calculins.e4gt.rom.v3.0
i was looking at installing the super galaxy rom but wanted to know if it is safe to flash a rom that is based off of ff11 when im currently on el29.
again only reason i ask is because i could not find mention of this in the op for that rom.
that and i never really had to worry about sow many different builds when i was on my OG Evo. any help would be greatly appreciated.
Click to expand...
Click to collapse
You have to flash the el26 kernel then copy the rom to your internal or external sd then you are all set just flash the rom in cwm.
Zero Night said:
You have to flash the el26 kernel then copy the rom to your internal or external sd then you are all set just flash the rom in cwm.
Click to expand...
Click to collapse
ah, thank you for the fast reply man.
and the kernal can also be flashed in cwm just like i used to do on the OG Evo? or would it have to be done through ODIN?
Yes it is safe. Youre baseband aka modem can be different from your kernal or rom base (super galaxy rom is based on FF11 stock rom). Just be extra careful flashing ICS roms so read up before doing anything.
And you don't need to go back to EL26 before you flash. Just use a custom recovery and flash Calk's Format All instead of wiping using the recovery. You don't need to do the extra work of going back to el26.
Hi guys,
I'm running stock 4.1.2 Jelly Bean on my d2tmo Galaxy S3. When I look up kernels and whatnot, they are labelled many different ways. Some have JB in the name, some with AOSP in the name. I'm wondering: what types of kernels can I flash if I'm running a rooted stock ROM? I don't want to flash any custom ROMs because I'm a musichead and I like the stock music player
Thank you!
First of all you can get then stock music player with a custom rom
Second you can only run aosp kernels with an aosp rom. Aosp stands for android open source project. Aosp is not stock.
You can only use kernels labeled stock or touchwiz if you are using stock based rom
Sent from my SGH-T999 using Tapatalk 2
3rd of all, what in the heck do you want? Haha, you say you are running a 4.1.2 rom (only aosp available on TMO) so AOSP... but you want a kernel for stock (4.1.1) touchwiz rom? The stock music apk is great and works on all stock touchwiz based roms, and in my resource guide I have a huge list of what is available and what is what, if the kernel says 4.1.1 TouchWiz then it is for 4.1.1 TouchWiz. if it says 4.2 AOSP it is for 4.2 AOSP, if it says 4.1 AOSP then it is for 4.1 AOSP... Look in my resource bible in my signature, or in the dev sections for [kernel].
See, that's where I get confused. Sorry for the noob questions. I've been looking around but can't find clear, precise answers.
I'm running the stock TouchWiz, out of the box, 4.1.1 Jelly Bean (updated while not rooted to 4.1.2). That stock ROM is not the same as an AOSP ROM or an AOKP ROM, is it? I have another Android device that runs CM10.1 so I know a bit here and a bit there about ROMs and whatnot, but I'm not so confident when it comes to my S3.
Simply put, I want to keep that stock ROM, but get a custom kernel, because the stock kernel SUCKS. I need to know what kernels I can flash, and clninja already said I can only flash kernels labelled stock or TW. Am I correct, so far?
Thank you!
Well here's a Kernel that is supposed to be supported for STOCK rooted : http://forum.xda-developers.com/showthread.php?t=1785466 :highfive: But seriously you should get a custom ROM, the performance improvement is incredible and power management too ! :laugh:
There is a 4.1.2 stock ota ROM?!? I suck lol.
Sent from my SGH-T999 using xda premium
kruse1944 said:
Well here's a Kernel that is supposed to be supported for STOCK rooted : http://forum.xda-developers.com/showthread.php?t=1785466 :highfive: But seriously you should get a custom ROM, the performance improvement is incredible and power management too ! :laugh:
Click to expand...
Click to collapse
That ROM is labelled Jelly Bean in the title but underneath that it says it's only compatible with ICS. Question mark.
Question: when you're running a custom ROM, if there's an update for it, say from 1.0.0 to 1.0.1, you can just flash the update right over and not worry about problems right? Or do you need to factory reset through recovery and wipe the caches all over again?
seokhun said:
That ROM is labelled Jelly Bean in the title but underneath that it says it's only compatible with ICS. Question mark.
Question: when you're running a custom ROM, if there's an update for it, say from 1.0.0 to 1.0.1, you can just flash the update right over and not worry about problems right? Or do you need to factory reset through recovery and wipe the caches all over again?
Click to expand...
Click to collapse
There are a couple of touchwiz kernal's around, Ktoonsez is one that I would recommend, http://forum.xda-developers.com/showthread.php?t=1871946
Usually the general rule of thumb with upgrading custom rom is full wipe and flash, but some users has dirty flashed and had no problems so it depends whether your phone likes you or not.
mt3g said:
There is a 4.1.2 stock ota ROM?!? I suck lol.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I see what you did there. :highfive:
seokhun said:
Question: when you're running a custom ROM, if there's an update for it, say from 1.0.0 to 1.0.1, you can just flash the update right over and not worry about problems right? Or do you need to factory reset through recovery and wipe the caches all over again?
Click to expand...
Click to collapse
Most of the times when you flash a ROM that is built off itself, you can "dirty flash". Example--> That means if you are already on a RootBox Nightly 2/17 with a clean install and RootBox 3/6 comes out, all you have to do is wipe /cache and /dalvik-cache and then flash the new version of the ROM. If any bugs creep up, then if you dirty flashed, chances are that is why.
If you are going to go from a TWiz ROM to an AOSP/AOKP ROM then I suggest a full factory reset and wipe accordingly. That way you have a clean install.
Read the OPs of the ROMs
TieDye21 said:
Usually the general rule of thumb with upgrading custom rom is full wipe and flash, but some users has dirty flashed and had no problems so it depends whether your phone likes you or not.
Click to expand...
Click to collapse
Yup. Thankfully my phone likes me, plus I kind of know what I am doing with regards to diagnosis.
@OP Can you please post exactly what your Build Number says in Settings>About Phone?
seokhun said:
That ROM is labelled Jelly Bean in the title but underneath that it says it's only compatible with ICS. Question mark.
Question: when you're running a custom ROM, if there's an update for it, say from 1.0.0 to 1.0.1, you can just flash the update right over and not worry about problems right? Or do you need to factory reset through recovery and wipe the caches all over again?
Click to expand...
Click to collapse
You could install the update, but seriously I never do updates. I manual flash the whole new ROM. ( and I never had any accidents or bugs)
For the kernel, its was a example kernel chose the one you prefert ( THAT SUPPORT TOUCHWIZ STOCK ROM ) or just flash a new ROM with build-in kernel like the ParanoidKANGdroid 10.2 ROM !
I flashed the FrostyJellybean ROM with Xone kernel and it's been good so far. I'm a religious person when it comes to battery, but so far it's about the same as the normal drainage on the stock ROM, no noticeable improvements.
Another question (whoop): if I run a Nandroid backup, does that backup include the ROM itself? In other words, if I'm running the Frosty ROM, and there's a ROM I want to test, will creating a Nandroid include the Frosty, or will it just backup the system image excluding the ROM itself? I'm asking this because I have wanted to restore my Nandroids but didn't know if that backup may overwrite my existing ROM with the previous ROM.
Thank you guys for taking your time to help me out, I really appreciate it!
Woody said:
@OP Can you please post exactly what your Build Number says in Settings>About Phone?
Click to expand...
Click to collapse
I have flashed a new ROM, so I no longer have the stock Build Number. It now says FrostyJellybean v11.6. I can tell you for a fact that I was previously running 4.1.1 rooted but without any customization or mod whatsoever outside the phone's original settings, so as stock as you can get.
A Nandroid is essentially a snapshot of your ROM at that point in time. You can back it up, try a new ROM and if you don't like it, then restore your Nandroid. A Nandroid should be done before you flash anything. You don't necessarily have to keep them all except your latest, but at least have one for when you try something out.
You can flash and restore just fine from ROM to ROM. Only thing is, you can't restore across platforms. Meaning, if you are on JB 4.1.1, you couldn't restore to ICS 4.0.4. Likewise you can restore a JB 4.1.1 if you are on a JB 4.2.2 ROM because of the file structure. There are ways to do it, but I won't go into that right now. Moral of that story is you can flash and restore laterally as far as builds go, but you cannot restore across different base builds.
*************
I just wanted to see your Settings>About Phone>Build Number because in your OP, you stated that you were running "stock 4.1.2 Jelly Bean". We don't have a stock 4.1.2 ROM, so I was making sure you didn't have another phone. Sure, could be a T999 but there are Canadian versions out there that require different things.
Oh, about the Android version, yes, it's 4.1.1. I wrote 4.1.2 because I thought there was some stuff going on, like wireless and whatnot, and had previously read somewhere that 4.1.2 was rolling out and my phone was doing the "Android is upgrading" thing when it booted up and I didn't check the version before writing that. No worries, it was the stock 4.1.1.
Thank you so much for answering my questions, you guys are awesome!
Hello and thank you for taking your time in reading, I will start by letting you know my samsung captivate glide is already rooted, android version 4.0.4 and stock kernel 3.1.10-I927ICLJ3-CL970642, now I found this wonderful thread in the development forums:
http://forum.xda-developers.com/showthread.php?t=1892538
mostly im interested in having more available RAM, but it does have a lot of good perks, after reading thru all 32 pages I could not find instruction on how to flash a kernel so here are my questions.
1) how do i flash a new kernel on my phone ?
2) Do i need to flash a rom as well or can i keep the stock ICS with the new kernel ?
Download and install clockworkmod .. the rest will make sense after that
yohan4ws said:
Download and install clockworkmod .. the rest will make sense after that
Click to expand...
Click to collapse
Oh I forgot to mention I already have clockwork mod
not sure if you can keep the stock rom with the kernel (bone stock.) I don't see why not ... I used Dman's UCLJ3 pre-rooted rom and flashed litekernel onto it so you should be able to.
in CWM, install zip from sdcard, browse to your download folder on your phone and install it.
MAKE SURE you do a full backup first so you can revert if something doesn't pan out.
yohan4ws said:
not sure if you can keep the stock rom with the kernel (bone stock.) I don't see why not ... I used Dman's UCLJ3 pre-rooted rom and flashed litekernel onto it so you should be able to.
in CWM, install zip from sdcard, browse to your download folder on your phone and install it.
MAKE SURE you do a full backup first so you can revert if something doesn't pan out.
Click to expand...
Click to collapse
ty yohan, i see that flashing a kernel is pretty much the same as flashing a rom, I like the stock rom, how stable is Dman's ?
There's crashing issues with his AOKP lockscreen version but it could be because I installed thegreatergoods litekernel. So if you're going to download the pre-rooted debloaded deodex. etc etc.. go with the one that doesn't have the lockscreen. the 14 toggles mod will work and can be configured by quickpanel settings in apps.
One thing that shouldn't be overlooked is ICE Pop, it has a themed dialer (big plus) ... Thegreatergoods literom will be good as well, but personally I dont like the cyan and yellow colors in the messaging app.
I flashed the kernel with success but after testing it for a week I decided to go back to stock, tho speeds were amazingly fast the device was alot more unstable and I couldent handle all the crashes and reebots
How well does the phone work with CMRom ? ive been reading in this thread of some happy and some unhappy user
http://forum.xda-developers.com/showthread.php?t=2109774&highlight=best+rom
I recomend to you icePop ROM 1.3
HexbladeInc2 said:
How well does the phone work with CMRom ? ive been reading in this thread of some happy and some unhappy user
http://forum.xda-developers.com/showthread.php?t=2109774&highlight=best+rom
Click to expand...
Click to collapse
Hi! I probe CM10rom but it do not have still audio in recording video, and for me is important.
Now, I have IcePop ROM 1.3 and I like it. Stable and with theatering, video record with audio and my car bluetooth link OK.
Rgrds
koximo
Hello all
I have an s3 running 4.0.4 that I am going to update sans TWRP and AOKP and just want to make sure I dont have to ODIN a stock 4.1.2 tar before installing TWRP and a custom ROM on a new android version.
Thanks so much guys!
hapticxchaos said:
Hello all
I have an s3 running 4.0.4 that I am going to update sans TWRP and AOKP and just want to make sure I dont have to ODIN a stock 4.1.2 tar before installing TWRP and a custom ROM on a new android version.
Thanks so much guys!
Click to expand...
Click to collapse
That's really not needed, but you still need to update your firmware/bootloader before installing a 4.2.2 AOSP ROM. If you read the CM10.1 thread, it was discovered that older (ICS) bootloaders do not play nice with JB 4.2 AOSP and will cause random reboots. CM10.1 (don't know about others) also won't install unless you're on a compatible bootloader.
To get the latest bootloader/firmware, you need to:
a) Odin to the latest AT&T JellyBean package
or
b) Download the I747 firmware package from here http://invisiblek.org/sgh-i747/ and flash it in recovery.
lol which part was uneeded thanks that is the EXACT answer i was looking for. i did find the smaller bootloader update package so i didnt have to install the full firmware..............and now i realize thats exactly what you linked to as well LMFAO sorry but thanks!!
Sorry I didn't see I was in a wrong forum
zethanas said:
Hello guys. I flashed hyperdroid 7 androidmeda then been with it for a year till I decided to flashed to Cyanogenmod 10.2 yesterday but some problem popped up. My GS2 can't find any signal, IMEI disappeared from "About phone". I tried many ways to solve it but all had failed so I flashed again with 4.0.4 base rom (I9100DXLPF - Thailand) successfully and planning to flash it to ERobot version 24(android 4.0.4) since it's quite popular in my country and that leads to my question
1. Since I flashed 4.0.4 base rom does that mean my device got unrooted?
2. If it's unrooted then should i flash Siyah kernel 5.0.1 to get it root again?
3. Does Siyah kernel already has CWM? or do I have to flash CWM in later?
4. In the case that ERobot rom can't function like I expect it to and I might want to go back to hyperdroid 7 which has android version 2.3.6 can I just use "install zip from SDCard in CWM" because at the time I should have CWM in already and with Siyah kernel.
Thank you in advance
Click to expand...
Click to collapse
WRONG FORUM
This is N2 forum and not S2!