Related
http://forum.xda-developers.com/showpost.php?p=8406167&postcount=223
So this already has a home. But I'm seeing that it works, very likely in ALL galaxy S cousins, and in fact possibly even in all 2.1 and 2.2 android phones. This is NOT the joeykrim method but it's related (but simpler and better, and obvious to most of you devs). Sadly this slowly gets rediscovered somewhere about once every two weeks for the past couple of months . There's a thread in epic started a few days later with the same trick, and a thread on droid forums:
http://www.droidforums.net/forum/re...08-multiple-phones-root-them-unroot-them.html
a couple of weeks earlier with the same trick. And a page on cyaongenmod where they show it for just one of the cousins.
It's nice for anyone who doesn't want to flash, and/or doesn't have a fully working recovery mode needed to use some of the one click methods (update.zip). Moreover... it probably works on pretty much EVERYTHING. The one clicks distract attention from the fundamental solutions because they don't always work on everything and new phones come out like popcorn.
Also I've included some useful related information about how to setup some of the popular initial root tools (with some personal bias, but not unlike a custom ROM), and how to undo it all. Making it a whole package custom ROM alternative (albeit a very lite alternative ). I haven't seen another post with all of this in one place.
I don't know where I should post this though because there is no general forum that I guess is likely to get read much that connects all the devices this may work on. But since it's working on more devices now and probably on froyo too, it seemed it might be helpful to someone to expose it a little beyond the shw-m110s sticky on issue 6. (even it has already been exposed before).
isnt this the same as superoneclick lag fix?
this didnt work for me on my i9000 froyo rom.
Ok.. well, does rageagainstthecage still work? Do you know? Did you try just that? the information "it didn't work" isn't very helpful. But then when you have one button you tend to get one response, and that's partly my point.
If you can get root with rageagainstthecage, the rest can all be worked out. And much more easily if more people in the community start to fear less the internals cause they're given information about what's going on, and it's VERY simple, as you can see in my post.. there's only ONE thing (properly installed su) you need to have root on ANY device. (getting root is a different issue, but the hard part is done) And there's no reason not to be explaining that in the BIG FAQ.
Indeed.. it looks like it probably is the same thing (but it's not really documented) . That did not exist when I first posted it.. hence why I worked it out myself. Personally I'm not a fan of one click anything, not as the primary reference at least. Because, ok.. it seems rageagainst the cage probably works on anything. A decent faq somewhere actually EXPLAINING what's required for root, and what rageagainstthe cage does (losely) and at least an example of how to use it on some device then is a good starting place for new phones.. new froyos.. good reference info.
However instead what happens is somebody else comes out with their latest method.. releases it as the mysupermagiconeclick method.. or even if it's script, without any explanation (and most people wouldn't understand, but maybe a few would). And then what happens?
Joeykrims script gets adopted on like 5 diferent devices where it isn't even needed(no offense to him.. he provided what he knew and got some people going who wouldn't have been otherwise). Multiple problems are created because of it. and that's not even a one click. That's a script for people who aren't too afraid to type script and still nobody noticed it wasn't needed?
Now a big one click comes out and someone just says "this doesn't work".
I see so many people saying "I don't know how to use adb" (even after you just told them "type adb push". It's very different that the winmo atmosphere a few years ago.
Anyway, I rageagainsthecage is the only alternative I know of to flashing or update.zip so it would be good if it got a little more attention I think and if people stopped treating the task of copying in 3 little files with permissions like some mystery work for "devs" to handle and folks to praise on high. I mean it's nice if someone can make a gui(and it takes work).. but it's amazing how hard it is often to just find an explanation of the very simple thing that's actually being done. (edit: even in Clshortfuses superoneclick thread.. he links to an older thread with the commands, but it's in page 49 or so.) There's like 5 commands needed with about 2 slight variations (nand unlocking and the setuserid joeykrim problem) that will root anything without flashing or destroying data, and that's not explained in a simple faq around here.)
By the way another reason it might not work is the rageagainsthecage exploit doesn't always (usually though) work the first try, and works better on some usb ports than others.
elsewhere:warlordxp said:
I have a problem with rooting my JP6
The Odin version seems to get well. But after reboot no root.
Then i tryed the SuperOneClick version.
I get this msg.
Pushing rageagainstthecage...
failed to copy 'rageagainstthecage' to '/data/local/tmp/rageagainstthecage': No such file or directory
OK
Click to expand...
Click to collapse
and I found the same thing on some german site.
maybe /data/local/tmp doesn't exist on froyo for I9000. If anyone was playing with a prompt and had instructions that point out that you only to need to copy it to ANY place where you can write and execute, they might figure out what's going on in one minute, and find another place to copy it to like just /data/local or wherever tmp got moved to. In every case I've seen problems, it was never that the exploit didn't work.
Now ok.. it's possible that somehow they've figured out a way to completely block writing new executable files anywhere from a shell. In which case it would need to get installed through an apk maybe, but it's still possible. Applications do run, all the time; so can this. Knowledge is power... not one click buttons.
ok then ill give you a bit more detail.
you are right, i cant see why it is failing although i can see where it is failing. if i had access to the script to see the steps its trying to take i could work it out but its compiled into a binary as far as i am aware.
the script pushes the file to the device, and it runs for the first loop. it installs the su command and superuser.apk, then loops back to make further changes (i.e. it kills adb and reestablishes a connection). when it loops back it tries to mount something, and fails saying "failed to find mount point" or something similar.
the su command works in shell/terminal until the phone is rebooted, then it is lost. the superuser doesnt work at all (i.e. no superuser requests are generated by apps requiring it, they just fail saying root not available).
kanemari said:
ok then ill give you a bit more detail.
you are right, i cant see why it is failing although i can see where it is failing. if i had access to the script to see the steps its trying to take i could work it out but its compiled into a binary as far as i am aware.
the script pushes the file to the device, and it runs for the first loop. it installs the su command and superuser.apk, then loops back to make further changes (i.e. it kills adb and reestablishes a connection). when it loops back it tries to mount something, and fails saying "failed to find mount point" or something similar.
the su command works in shell/terminal until the phone is rebooted, then it is lost. the superuser doesnt work at all (i.e. no superuser requests are generated by apps requiring it, they just fail saying root not available).
Click to expand...
Click to collapse
Great it sounds like you basically understand what is going on and aren't afraid of a tiny bit of typing. I think MANY people fit that description including myself a few weeks ago. But... the steps are not usually explained as you say. So... click the link in my first post again. It's all explained there. I've started a section there on exceptions.. including what I think might be going on with yours, but your description is a little different from the ones I copied in, so we don't know yet. So go at it, and good luck. I'll be glad to help if I can but my crusade is to get more people who want to to be able to play with it themselves (and to be able to ask questions too, though especially when getting new devices/roms rooted)
I assume you know about adb and and how to run it by hand in the first place. I don't describe that and there are faqs that do, including I think the Big FAQ. That obviously must work first.
P.S. I may add some linux/mac scripts shortly... piece of cake to do.. already did it for the joeykrim method. CLShortFuse is adding linux support but it involves 175 MB of cross-platform compatibality libraries and is at least almost as hard to setup as it is to just use adb. To each his own. It's a neat accomplishment if it works.
For me I push the unroot script to my phone and can unroot when I walk in a store if I want to. I like Rynza's apk for that, but it doesn't work with my phone (3 button, yes... update option, no )
too much verbage for me daddybear...
but anyway ill give it a shot next time i need to root my device and let you know if i come up with anything useful.
The first to admit to cracking the code . But you only get full credit if you know the reference too!
the su command works in shell/terminal until the phone is rebooted, then it is lost.
Click to expand...
Click to collapse
actually.. if this is really true.. it's almost certainly a joeykrim style problem. The other symptoms are harder to follow, especially depending if superuser never worked or only didn't work after reboot. Anyway, this will certainly get resolved in time I'm sure. If you had su working at all.. then it's just a matter of applying the right tweaks/work arounds (which are likely already known).
Ok before I begin I want to say I am not a total noob at this stuff, although I am not a master. I have rooted and installed roms, radios and Kernels on three different phones and I've also used adb to do some random things. I have only used them on windows pc's but never on an apple pc.
I got the HTC G2 to play around with, since I am not brave enough to do it on my SGS 4G. The first thing I did was install VISIONary+. I was able to acquire temp root but after tinkering with it I broke my R/W access(just an assumption). I decided to give up and go the good old ADB way.
I searched the forums and found solutions but they are only for intel based macs. I am running a PPC mac. I scoured the interwebz and have lucked out and found a guy who modified the files to works on PPC architecture's. He also stated that this was done on a Leopard laptop, Mine is tiger(yes i am to cheap and to fork out 150 bucks for a new OS) OS X 10.4.11.I am starting to feel my problem is the Tiger OS. When I connect my phone I enable debugging and connected it to my laptop. I open my terminal and type:
-------------
""/Users/brianjaqua/desktop/android_ppc/adb""
-------------
when I do that It gives me a bus error. I have also tried just double clicking the file to start adb that way and it gives me:
-------------
""Last login: Tue Jul 26 13:10:59 on console
/Users/brianjaqua/Desktop/android_ppc/adb; exit
Welcome to Darwin!
brian-jaquas-ibook-g4:~ brianjaqua$ /Users/brianjaqua/Desktop/android_ppc/adb; exit
Bus error
logout
[Process completed]""
-------------
I am stumped I have tried everything I can think of. When I did give up i tried installing the original rom that came with it to try and fix the R/W problem that VISIONary gave me. I tried a modified version that came with root already something that I was able to supposedly just do without rooting. The phone didn't even pick it up from the boot loader as being on my sd card, seemed to me like it just ignored the fact that it even existed. so i ditched it and went with a totally fresh pc10img.zip one that hadn't been tinkered with, yup same damn issue just ignored it's existence. Then I got Super excited when I found a leaked release of gingerbread on the interwebz. Every single darn person said boot loader acknowledged its existence and started to install it(even on unrooted phones) without an issue. But what did i get? a big **** slap to the face! once again my phone ignored its existence!!! WTF?!?!? So now I am stuck in the mudd while everyone else is enjoying the party. And yes Its on the root of my sd card.Any clue as to why it seems my phone doesnt want to install a pc10img.zip file? or why i cant use VISIONary+ or even why ADB is telling "**** you"? Any help would be greatly appreciated, even maybe just a nudge in the right direction or a "Hey Bro your not a total ****ing retard" would be greatly helpful. Thank you for reading my ramblings and such.
Make sure the pc10img.zip is all caps. If the mods were created on leopard I'm pretty sure you are SOL if running tiger. Don't use visionary for the exact reasons you mentioned above. Lion is only like 50 bucks.
Tiger is super outdated ya know
Sent from my HTC Desire Z using XDA Premium App
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Penley94 said:
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Click to expand...
Click to collapse
The key here is going to be getting back into recovery. Have you tried getting into Download Mode? If you saw the LG logo then you SHOULD be able to get into download mode. Make sure the phone is completely powered off. Connect the USB to your pc but before you connect the other end to your phone, hold volume up then connect it. You should see "Download Mode" on the screen. You will see other directions for download mode but for me this always works, usb to pc, hold volume up then plug the phone in while still holding the volume up. If you can get into Download Mode you can flash a teenybin to get back into recovery following the guide in this thread here.
Currently even if you can get into Download Mode adb might not recognize your phone(at least it never did for me). Once you flash a teenybin using LGNPST, you should be able to get into Recovery. Once in Recovery you can use adb to pull your files off of the phone and onto your computer. I use it from a linux terminal but there are guides available for Windows if that's what you use. The adb guide should be easy to find on xda(just search) so I haven't linked to it. Once adb is set up on your computer AND you can get into Recovery you can use the command 'adb pull /data/media' without quotations and it will copy the contents of your internal storage to your pc. However if you can get into recovery you do have other options for just getting the phone back up and running. This guide here should also help.
If you are familiar with irc(internet relay chat) you can hop onto freenode and enter the #lg-optimus-g channel. As soon as you enter the channel you will see "Need Help? You won't read this but..." followed by a link. All the files for LGNPST, teenybins, and in depth tutorials on fixing a soft brick will be found there. I hope this helps you and hooray for me because this is my 200th post!
PS - If you can't get into Download Mode then your secondary bootloader is gone and there isn't anything you can do(to my knowledge). However, like I said, if you saw the LG logo at all, Download mode should still be an option. Also keep in mind these instructions are for the Sprint(ls970) lg optimis g. I believe the keys are flipped on AT&T/International models(Volume Down when you plug it in to get to Download Mode).
HPTesla said:
The key here is going to be getting back into recovery. Have you tried getting into Download Mode? If you saw the LG logo then you SHOULD be able to get into download mode. Make sure the phone is completely powered off. Connect the USB to your pc but before you connect the other end to your phone, hold volume up then connect it. You should see "Download Mode" on the screen. You will see other directions for download mode but for me this always works, usb to pc, hold volume up then plug the phone in while still holding the volume up. If you can get into Download Mode you can flash a teenybin to get back into recovery following the guide in this thread here.
Currently even if you can get into Download Mode adb might not recognize your phone(at least it never did for me). Once you flash a teenybin using LGNPST, you should be able to get into Recovery. Once in Recovery you can use adb to pull your files off of the phone and onto your computer. I use it from a linux terminal but there are guides available for Windows if that's what you use. The adb guide should be easy to find on xda(just search) so I haven't linked to it. Once adb is set up on your computer AND you can get into Recovery you can use the command 'adb pull /data/media' without quotations and it will copy the contents of your internal storage to your pc. However if you can get into recovery you do have other options for just getting the phone back up and running. This guide here should also help.
If you are familiar with irc(internet relay chat) you can hop onto freenode and enter the #lg-optimus-g channel. As soon as you enter the channel you will see "Need Help? You won't read this but..." followed by a link. All the files for LGNPST, teenybins, and in depth tutorials on fixing a soft brick will be found there. I hope this helps you and hooray for me because this is my 200th post!
PS - If you can't get into Download Mode then your secondary bootloader is gone and there isn't anything you can do(to my knowledge). However, like I said, if you saw the LG logo at all, Download mode should still be an option. Also keep in mind these instructions are for the Sprint(ls970) lg optimis g. I believe the keys are flipped on AT&T/International models(Volume Down when you plug it in to get to Download Mode).
Click to expand...
Click to collapse
Thank you for the response, i just tryed to get in to download mode and it went in to it fine. I would try to do all that to repair it but I dont want sprint to see that its rooted and it I cant have it be fixed when the new phone comes in, the only thing that i want is to get my files from it. Is there any way that I can just do that but leave the phone the way it is? (Not booting up passed the lg logo) I want the new phone because my current Optimus G's battery is going pretty bad I think and I would like a new one.
Penley94 said:
Thank you for the response, i just tryed to get in to download mode and it went in to it fine. I would try to do all that to repair it but I dont want sprint to see that its rooted and it I cant have it be fixed when the new phone comes in, the only thing that i want is to get my files from it. Is there any way that I can just do that but leave the phone the way it is? (Not booting up passed the lg logo) I want the new phone because my current Optimus G's battery is going pretty bad I think and I would like a new one.
Click to expand...
Click to collapse
There are plenty of ways to get it stuck at the lg logo, sometimes it happens just from dirty flashing a rom, sometimes because you install a rom without wiping dalvik/cache. But you should know if you are on Sprint, one of the reasons I stick with them(even though their coverage is horrible in my area) is because rooting DOES NOT void your warranty with Sprint. They will warn you against it but they are the only carrier that allows rooting and will still fix your phone. Here is some info on that here. They won't advertise it but it's the truth. But bricking your phone intentionally is pretty easy I think. After getting back your data, just go into recovery and start deleting stuff you normally wouldn't. It's similar to opening up your car's hood and saying "This looks important" and ripping it out, lol. At this point that's what I would do, fixing your rooted phone is within their warranty, replacing it(which is what you want) I'm not 100% on. Although the post I linked to, says even ordering a replacement on a rooted phone is covered. Its in a reply on that page, you'll see another link. So you could get your info, use a different LGNPST file to set your phone back to factory(which will relock the bootloader and lose root) and then you can do what you did to get there in the first place or root it and start deleting important files with a root explorer to get it back to being stuck. Hope this helps.
HPTesla said:
There are plenty of ways to get it stuck at the lg logo, sometimes it happens just from dirty flashing a rom, sometimes because you install a rom without wiping dalvik/cache. But you should know if you are on Sprint, one of the reasons I stick with them(even though their coverage is horrible in my area) is because rooting DOES NOT void your warranty with Sprint. They will warn you against it but they are the only carrier that allows rooting and will still fix your phone. Here is some info on that here. They won't advertise it but it's the truth. But bricking your phone intentionally is pretty easy I think. After getting back your data, just go into recovery and start deleting stuff you normally wouldn't. It's similar to opening up your car's hood and saying "This looks important" and ripping it out, lol. At this point that's what I would do, fixing your rooted phone is within their warranty, replacing it(which is what you want) I'm not 100% on. Although the post I linked to, says even ordering a replacement on a rooted phone is covered. Its in a reply on that page, you'll see another link. So you could get your info, use a different LGNPST file to set your phone back to factory(which will relock the bootloader and lose root) and then you can do what you did to get there in the first place or root it and start deleting important files with a root explorer to get it back to being stuck. Hope this helps.
Click to expand...
Click to collapse
Oh wow I never knew that but that helps a lot thanks for the help, the sprint guy said theydid a master reset or hard reset or soemthing like that, does that mean it deleted all my pictures and everything? And i understand what you mean to rebrick it that's pretty simple. When i get my new optimus is there a new root out for the update? And what roms do you prefer?
Penley94 said:
Oh wow I never knew that but that helps a lot thanks for the help, the sprint guy said theydid a master reset or hard reset or soemthing like that, does that mean it deleted all my pictures and everything? And i understand what you mean to rebrick it that's pretty simple. When i get my new optimus is there a new root out for the update? And what roms do you prefer?
Click to expand...
Click to collapse
If they did a hard reset it is possible that it wiped everything but not a definite. I purchased my phone from Best Buy and was on zvb. When the zvc update came through it messed my phone up(which is why you don't take OTA's once rooted without further knowledge/modifications) so I took it to Best Buy and they said they did a hard reset to fix it. It worked, my phone booted back up and my internal was fine. However, that's Best Buy and they barely know what they are doing so it may have been a soft reset, I am not 100% sure. As for a new root for the update, I received another phone shortly after because the glass back on mine broke and Best Buy replaced it with a whole new phone. It was on zvc and I used an app named Framaroot with the Gandalf exploit option and it worked fine for me. I have heard of others having issues with that method but for me, it worked and has stuck.
Fiddy619's universal root method seems to be the preferred way for our phone, look in the general section here for a thread by engine95 to see what I mean. After I rooted with Framaroot I then used FreeGee and unlocked the bootloader then made a total nandroid backup of my stock in TWRP before going further. I also copied the backup to my PC just in case.
As for my preferred roms, if we are talking about Android 4.4 both Vanir and PSX are my personal favorites. However as you can tell from my signature I am still using stock zvc android 4.1.2. I have flashed just about every rom available for our phone but my daily driver is stock that I have modified manually(different kernel, removed bloat ware, minor modifications and tweaks, etc). For android 4.3 I have had the best experience with CM10.2 and cfxe. I have not tried CM11(based on 4.4) for awhile but it seems to have overwhelming support - Cyanogenmod usually does.
Really when it comes to roms it's personal preference. They are all very similar with different tweaks/additions. As for which one is the most stable that is also a tricky question. Even though we have the same model of phone, I have seen how picky they can be from one to the other. My roommates have the EXACT same phone, installing CM10.2 worked fine for two of us, but one lost GPS and I had to fix it.
My best advice for when you get your new phone is to backup your working stock and then have fun flashing different things making sure you follow the instructions per rom exactly. It's always a good idea after making your backup(if planning to install another rom) to wipe everything except your internal storage and do a clean install of the rom and gapps. Then, test it for a day or so because sometimes it takes time to settle in. It's a shame that Optimus DE gave you issues, it was rock solid for me, again, these phones are picky! But one of the main reasons I stayed with stock is because the AOSP based cameras leave much to be desired when compared to the LG camera. Again it's just personal preference because some don't like the lg camera.
If you have any other issues or questions I will be glad to help if I can. A lot of the people you see who are active on the forums are very knowledgeable, as long as you ask politely most will be glad to help.
HPTesla said:
If they did a hard reset it is possible that it wiped everything but not a definite. I purchased my phone from Best Buy and was on zvb. When the zvc update came through it messed my phone up(which is why you don't take OTA's once rooted without further knowledge/modifications) so I took it to Best Buy and they said they did a hard reset to fix it. It worked, my phone booted back up and my internal was fine. However, that's Best Buy and they barely know what they are doing so it may have been a soft reset, I am not 100% sure. As for a new root for the update, I received another phone shortly after because the glass back on mine broke and Best Buy replaced it with a whole new phone. It was on zvc and I used an app named Framaroot with the Gandalf exploit option and it worked fine for me. I have heard of others having issues with that method but for me, it worked and has stuck.
Fiddy619's universal root method seems to be the preferred way for our phone, look in the general section here for a thread by engine95 to see what I mean. After I rooted with Framaroot I then used FreeGee and unlocked the bootloader then made a total nandroid backup of my stock in TWRP before going further. I also copied the backup to my PC just in case.
As for my preferred roms, if we are talking about Android 4.4 both Vanir and PSX are my personal favorites. However as you can tell from my signature I am still using stock zvc android 4.1.2. I have flashed just about every rom available for our phone but my daily driver is stock that I have modified manually(different kernel, removed bloat ware, minor modifications and tweaks, etc). For android 4.3 I have had the best experience with CM10.2 and cfxe. I have not tried CM11(based on 4.4) for awhile but it seems to have overwhelming support - Cyanogenmod usually does.
Really when it comes to roms it's personal preference. They are all very similar with different tweaks/additions. As for which one is the most stable that is also a tricky question. Even though we have the same model of phone, I have seen how picky they can be from one to the other. My roommates have the EXACT same phone, installing CM10.2 worked fine for two of us, but one lost GPS and I had to fix it.
My best advice for when you get your new phone is to backup your working stock and then have fun flashing different things making sure you follow the instructions per rom exactly. It's always a good idea after making your backup(if planning to install another rom) to wipe everything except your internal storage and do a clean install of the rom and gapps. Then, test it for a day or so because sometimes it takes time to settle in. It's a shame that Optimus DE gave you issues, it was rock solid for me, again, these phones are picky! But one of the main reasons I stayed with stock is because the AOSP based cameras leave much to be desired when compared to the LG camera. Again it's just personal preference because some don't like the lg camera.
If you have any other issues or questions I will be glad to help if I can. A lot of the people you see who are active on the forums are very knowledgeable, as long as you ask politely most will be glad to help.
Click to expand...
Click to collapse
Okay Im going to try some new roms out when I get my new phone, I would like to try out an AOSP Kitkat Rom but I couldnt get one to flash last time I tryed but I will figure that out later when I get it. Now back to my Bricked Optimus, I want to try the teenybin method although I dont understand the directions... the second step tells me to flash but how can I do that without recovery? and it doesnt say anything about entering in download mode which is the only thing I can do, am I forgetting something? And thank you for the help Tesla I really appreciate it, Ive had more assistance from you than anyone else.
Penley94 said:
Okay Im going to try some new roms out when I get my new phone, I would like to try out an AOSP Kitkat Rom but I couldnt get one to flash last time I tryed but I will figure that out later when I get it. Now back to my Bricked Optimus, I want to try the teenybin method although I dont understand the directions... the second step tells me to flash but how can I do that without recovery? and it doesnt say anything about entering in download mode which is the only thing I can do, am I forgetting something? And thank you for the help Tesla I really appreciate it, Ive had more assistance from you than anyone else.
Click to expand...
Click to collapse
Are you a windows user? The teenybin isn't flashed from recovery it is flashed from a tool called LGNPST which is a Windows program. I am going to private message you a link. It will have links for downloading and installing LGNPST on your PC. It says that you will lose all your data but if you are using the teenybin you shouldn't. It's LG's tool for flashing firmware and gives that warning regardless of what you flash. And you're welcome, coming from an EVO 4G this phone is very different and plenty of people have helped me - just paying it forward.
HPTesla said:
Are you a windows user? The teenybin isn't flashed from recovery it is flashed from a tool called LGNPST which is a Windows program. I am going to private message you a link. It will have links for downloading and installing LGNPST on your PC. It says that you will lose all your data but if you are using the teenybin you shouldn't. It's LG's tool for flashing firmware and gives that warning regardless of what you flash. And you're welcome, coming from an EVO 4G this phone is very different and plenty of people have helped me - just paying it forward.
Click to expand...
Click to collapse
Hey I got in to recovery through the Teenybin although the reset that they did deleted all of my stuff so Im kinda bummed:/ but its okay cause I got my new Optimus today and its brand new so Im happy with it. Thanks again for all of the help. Thats funny that you used to have an EVO 4G because I had it for so long and thats the phone I switched back to when my LG got bricked, but let me tell you Im glad to be back to the Optimus haha the EVO 4G is just way to slow anymore. Now that I have this new Optimus which root method should I go with? Its currently runnning ZVB (4.1.2) should I update the software? It says theres a software update available but I know that sometimes they dont have roots out for those updates so how should I start with this process again with the new phone in your opinion? I havnt done this in forever (going on a year) so I cant really remember everything that I had to do.
Penley94 said:
Hey I got in to recovery through the Teenybin although the reset that they did deleted all of my stuff so Im kinda bummed:/ but its okay cause I got my new Optimus today and its brand new so Im happy with it. Thanks again for all of the help. Thats funny that you used to have an EVO 4G because I had it for so long and thats the phone I switched back to when my LG got bricked, but let me tell you Im glad to be back to the Optimus haha the EVO 4G is just way to slow anymore. Now that I have this new Optimus which root method should I go with? Its currently runnning ZVB (4.1.2) should I update the software? It says theres a software update available but I know that sometimes they dont have roots out for those updates so how should I start with this process again with the new phone in your opinion? I havnt done this in forever (going on a year) so I cant really remember everything that I had to do.
Click to expand...
Click to collapse
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Exactly what he said, framaroot was quick and easy for me, but the lgog is so damn picky and fiddy seems to be the preferred method so use it just to be safe. I had zero issues with framaroot but I think I've just been lucky. And definitely update to zvc before doing either. I'd also update prl and profile for good measure.
That sucks that you lost all of your data, they must have actually did a hard reset where as BestBuy told me they did a hard reset and actually did a soft reset. But it's BestBuy so I never expect much. I softbricked my lgog the day after I got it using the GAIO tool(before finding out about FreeGee) and they fixed it with a soft reset. The guy called the manager over and the manager asked me if I tried unlocking the bootloader and I played dumb. My exact words were "What the hell is a bootloader?" and he immediately fixed it. But I was shocked anyone at BestBuy would even know that. Lmao.
As for my EVO, the micro usb port broke so I was charging it for two months like MacGyver, literally stipped the usb charging wire and hooked it straight into the positive/negative terminals in the battery while turned off! It was a fire hazard but it did the trick, lol. And luckily it had external sd(my one big gripe about the lgog) so I could still get my stuff off of it even without usb. I did love that phone, but you're right, it's incredibly slow now compared to the wonderful lgog.
And as always you are quite welcome!
---------- Post added at 07:39 PM ---------- Previous post was at 07:30 PM ----------
Penley94 said:
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
Click to expand...
Click to collapse
I think the reason I say framaroot is bc its also super easy, install the app, pick gandalf exploit and it will do it's thing - done without ever connecting to a pc. But @engine95 is right, fiddy is more stable so use that. As for TWRP, I love 2.5.0.0 but for KK roms you have to use the one that comes with updated FreeGee, TWRP 2.6.3.x because of the SELinux changes Google made with 4.4. TWRP 2.6 was unstable originally but has since become just as stable as 2.5 according to most. OpTimuS DE was rock solid for me, as for getting some of the G2 apps, I'm not certain. It's doable but I don't know how difficult it would be because I've never tried to install them elsewhere. And I already gave you my choice of best current KK roms but today I found out a few guys are trying to get OMNI official for us. When that happens I think I will be switching to OMNI because they have been producing some impressive commits/tweaks that you won't find elsewhere. Just look through xda news to see what I mean, OMNI is on a roll!
Penley94 said:
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
Click to expand...
Click to collapse
I prefer TWRP just because that has always been our best one since the beginning. Now that all the versions of the OG are coming together though both are fine.
I like stock, but Lrod's OpTimuS 5.0 is my daily. The G2 adds he made got me hooked.
If your gonna try to pull some stuff from DE, check with Lrod. He's made alot of changes to a lot of files making it difficult. For me at least.
I've ran all the KK Roms and I liked them all. PSX is probably my favorite though. I liked Liquid in its early days, pre KK. I'm not sure it's up to KK yet.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
I prefer TWRP just because that has always been our best one since the beginning. Now that all the versions of the OG are coming together though both are fine.
I like stock, but Lrod's OpTimuS 5.0 is my daily. The G2 adds he made got me hooked.
If your gonna try to pull some stuff from DE, check with Lrod. He's made alot of changes to a lot of files making it difficult. For me at least.
I've ran all the KK Roms and I liked them all. PSX is probably my favorite though. I liked Liquid in its early days, pre KK. I'm not sure it's up to KK yet.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Again, I think you're right on all fronts. Liquid was smooth(heh) but it hasn't been long since we received an official 4.3 so I don't think they're up to 4.4. And same goes for the G2 apps, sometimes it's as simple as pulling an apk out of a zip and pushing it to system/apps and changing permissions but I think Lrod did a lot of work to get the G2 apps working on our phone because they required certain dependencies/modified frameworks.
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Okay so I rooted it through fiddys universal root but when I try to go on to FreeGee it just doesnt want to open for me? Ive tryed a lot of times and I get nothing it will either send me to the playstore to an app called busy box or will sometimes restart my phone, Im confised I have no clue what to do? I tryed to uninstall and reinstall and nothing I installed the busybox app but it said I didnt have root permission or there was a problem getting the root or something like that.
Penley94 said:
Okay so I rooted it through fiddys universal root but when I try to go on to FreeGee it just doesnt want to open for me? Ive tryed a lot of times and I get nothing it will either send me to the playstore to an app called busy box or will sometimes restart my phone, Im confised I have no clue what to do? I tryed to uninstall and reinstall and nothing I installed the busybox app but it said I didnt have root permission or there was a problem getting the root or something like that.
Click to expand...
Click to collapse
You have to root before unlocking.
Make sure your phone has at least 70 percent charge or more!!
Go to Settings: Settings>Security>Unknown sources checked: Settings>Developer Options>USB Debugging checked, Settings> Display>Screen Timeout - at least 5 min
from fiddy thread.
Directions
1. Unzip the zip file
2. Make sure USB Debugging is on, and you are in Charge only Mode
3. Run the CurrentRoot.bat, wait for the prompt. (Can now be run as admin if you wish, Still works running as regular user tho. Thanks robisodd)
4. Change to MTP Mode
5. Just ignore when your computer asks how to view files on your device.
6. Press enter in the CMD prompt to continue.
7. Done.
You shouldn't have any issues.
If you do, then try Framaroot. http://forum.xda-developers.com/showthread.php?t=2130276 and follow those directions.
Follow this. http://forum.xda-developers.com/showthread.php?t=2050582 It has all the info on rooting and unlocking
Edit. You may have to root as admin/not admin, try both.
Edit #2 Also, do not use USB 3.0 ports. They are iffy for this stuff. LGNPST included
engine95 said:
You have to root before unlocking.
Make sure your phone has at least 70 percent charge or more!!
Go to Settings: Settings>Security>Unknown sources checked: Settings>Developer Options>USB Debugging checked, Settings> Display>Screen Timeout - at least 5 min
from fiddy thread.
Directions
1. Unzip the zip file
2. Make sure USB Debugging is on, and you are in Charge only Mode
3. Run the CurrentRoot.bat, wait for the prompt. (Can now be run as admin if you wish, Still works running as regular user tho. Thanks robisodd)
4. Change to MTP Mode
5. Just ignore when your computer asks how to view files on your device.
6. Press enter in the CMD prompt to continue.
7. Done.
You shouldn't have any issues.
If you do, then try Framaroot. http://forum.xda-developers.com/showthread.php?t=2130276 and follow those directions.
Follow this. http://forum.xda-developers.com/showthread.php?t=2050582 It has all the info on rooting and unlocking
Edit. You may have to root as admin/not admin, try both.
Edit #2 Also, do not use USB 3.0 ports. They are iffy for this stuff. LGNPST included
Click to expand...
Click to collapse
Okay i will try this later when i have access to a computer, but the last root i tryed told me it was successful although it didnt restart my phone or anything it just said it was in the command prompt. I will try again cause i dont think it did anything. But i have a question about roms, i am most likely going to flash the DE 5.0 again because i like it with the g2 keyboard and i kind of like the lg feel to it but the only problem is google play music always gives me an error when im playing songs and it always has. I heard aosp roms dont have that problen so in your opinion what is the most stable aosp rom with all features working like gps and everything??
Penley94 said:
Okay i will try this later when i have access to a computer, but the last root i tryed told me it was successful although it didnt restart my phone or anything it just said it was in the command prompt. I will try again cause i dont think it did anything. But i have a question about roms, i am most likely going to flash the DE 5.0 again because i like it with the g2 keyboard and i kind of like the lg feel to it but the only problem is google play music always gives me an error when im playing songs and it always has. I heard aosp roms dont have that problen so in your opinion what is the most stable aosp rom with all features working like gps and everything??
Click to expand...
Click to collapse
AOSP SuperNexus has been getting good reviews here in the forums but I haven't tried it yet. I would give that one a shot though. I'd flash GAPPS standard with it instead of GAPPS core as well. This is just generally speaking with any of the AOSP roms.
The directions @engine95 gave you for fiddy are spot on(as usual ), specifically having the phone in charge only mode instead of mtp. I think a lot of people have missed that step and it won't work in mtp. Using usb 2.0 is another good tip.
And if your phone didn't reboot, you probably arent rooted. Easiest way to check that you are rooted is by going into the app drawer and seeing either Superuser or SuperSu app. If it's there, you're rooted, if not, it didnt work. If it said it worked but didnt reboot, Im assuming you rebooted manually? It sounds silly but sometimes it's as simple as that. But again, after rebooting if one of those apps arent there, you are not rooted.
EDIT: I've never tried rooting with fiddy without being in charge only mode, Im wondering if being in mtp may install supersu/superuser app but not the binary? Probably not but I could be wrong. Just wondering if there is any possible way that the app could be there but you still wouldn't have root privileges. For me, if the app is there, I'm rooted but I don't pretend to know everything(far from it, lol).
EDIT#2: Once you are rooted and recovery is installed, here is the link to SuperNexus.
EDIT#3: And I can't stress this one enough....after rooting and unlocking the bootloader, before flashing ANYTHING, make a full backup of your stock AND copy the TWRP folder(with your backup in it) to a computer, JUST IN CASE! That way you will always have a backup elsewhere, even if something goes wrong with your phone's internal storage. Better safe than sorry!!! And it's also best to copy the entire TWRP folder.
@HPTesla You're on a roll!
Go with everything he's said.
I don't use Google music ,so I'm of little help there.
Almost every ROM has its quirks, and it's just a matter of finding the one that does what you need/want.
Our devs have given us a lot of options. And I know, I sure appreciate them.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Penley94 said:
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Click to expand...
Click to collapse
I ran OpTiMuS for a long time and every time I would try new roms, decide I didn't like or whatever and go back, I'd always have to 1. Dial ##72786# 2. Let it self activate sometimes twice, but usually just once before I would pick up 3g/4g. May have just been my phone but you may try that out if you go back to optimus De. Over all, my favorite stock like rom though.
Sent from my Optimus G using XDA Premium 4 mobile app
So I created this topic because there is hardly anything on the internet regarding this tablet. I just recently purchased it from Best Buy and it took me quite some time to find something that would help me root it. Finally, I tried vroot ( a rooting application) and I succeeded in rooting my tablet. I don't have the exact link I used to get vroot but a simple Google search should suffice. Anyway, I figured I'd start this topic for anyone and everyone who uses this tablet or knows of this tablet to discuss any other developments. For now, if anyone needs help rooting their tablet and getting superuser running, I'm here to help.~
For now, I hope you all can figure out how to use vroot (yes, I know it's in Chinese. I can not read Chinese but it was pretty simple to get through the process of rooting.) Anyway, I don't remember the specifics but if anyone else gets through it, I ask that you please post some details on how you did it for everyone else to get through it as well. Hopefully, with time, we can get some good stuff going with this tablet. Could anyone figure out how to get CWM Recovery running on it? I'm a bit new to this and I don't want to screw anything up.
Thanks for the heads up! I also bought this tablet about a month ago. I was impressed with how thin and light it was, and how nice and bright the (IPS) screen was, especially for a cheaper "no-name" tablet. I've since found virtually no online support for this. D2 didn't even seem to list it on their own website. Although, finally today, I found this thread, and this site: http://www.d2pad.info/index.php?option=com_content&view=frontpage&Itemid=585. Seem the model is exclusive to Best Buy.
The only problem I've had with this tablet is that on rare occasions, if the screen is left on too long, the touch controls go a bit haywire, detecting random touches all over the place, and not really responding. Simply turning the screen off and back on fixes the problem. (Also, the camera is kind of ****ty, but I don't really care about that)
Anyhow, I'll definitely be trying to root this tomorrow. I take it you didn't need any special drivers? I came across this (http://scottyzone.com/2014/03/17/connect-the-d2-961g-to-adb-using-google-usb-drivers/), which I'll try if I can't get the tablet connected to my computer properly to run Vroot.
Thanks!
arpitp said:
Thanks for the heads up! I also bought this tablet about a month ago. I was impressed with how thin and light it was, and how nice and bright the (IPS) screen was, especially for a cheaper "no-name" tablet. I've since found virtually no online support for this. D2 didn't even seem to list it on their own website. Although, finally today, I found this thread, and this site: http://www.d2pad.info/index.php?option=com_content&view=frontpage&Itemid=585. Seem the model is exclusive to Best Buy.
The only problem I've had with this tablet is that on rare occasions, if the screen is left on too long, the touch controls go a bit haywire, detecting random touches all over the place, and not really responding. Simply turning the screen off and back on fixes the problem. (Also, the camera is kind of ****ty, but I don't really care about that)
Anyhow, I'll definitely be trying to root this tomorrow. I take it you didn't need any special drivers? I came across this (http://scottyzone.com/2014/03/17/connect-the-d2-961g-to-adb-using-google-usb-drivers/), which I'll try if I can't get the tablet connected to my computer properly to run Vroot.
Thanks!
Click to expand...
Click to collapse
Thank you for bringing some needed attention to this topic! I actually used the Vroot application, rather than the software. It took a few tries but I got it to work. If you want to try the software, however, I've connected it to my computer numerous times without the need for any special drivers. Only thing I can suggest is the generic google drivers. By the way, I reverse searched the tablet's hardware and kernel and came across a duplicate device from China. It is exactly identical right down to the appearance, hardware and software to our tablet. It is called the Chuwi VX8 and the only difference is that it comes in white rather than black.
After making this discovery I came across a nice little development topic for the clone device (http://www.freaktab.com/showthread.php?16025-Chuwi-VX8-RileyROM-1-1) and it seems they've founded good amount of research into the tablet. They've come up with a rom (I've yet to test), CWM Recovery (Unable to flash. If anyone else can try, that'd be dandy.), root methods (with links), among other things. It seems that anything that would work with the Chuwi tablet SHOULD work with the Digital2 Platinum Pad 8. The same rooting method was required and everything about the two tablets is perfectly identical so I'm led to believe they're going to be able to use identical roms or recoveries. I'll look more into flashing CWM Recovery tonight and get back to you on my results.
Josh8550 said:
Thank you for bringing some needed attention to this topic! I actually used the Vroot application, rather than the software. It took a few tries but I got it to work.
Click to expand...
Click to collapse
Which app exactly are you referring to. I thought it was something in the Play Store, but no luck finding what you're referring to.
arpitp said:
Which app exactly are you referring to. I thought it was something in the Play Store, but no luck finding what you're referring to.
Click to expand...
Click to collapse
Found this link (http://products.mgyun.com/api/downjump?id=846) just for you. It should work but let me now whether or not it does. It's the exe for computers but if it doesn't work Google "vroot apk" for the app.
Josh8550 said:
Found this link (http://products.mgyun.com/api/downjump?id=846) just for you. It should work but let me now whether or not it does. It's the exe for computers but if it doesn't work Google "vroot apk" for the app.
Click to expand...
Click to collapse
As you mentioned, the link was for the (Windows) software. It requires ADB connection to a computer (usually requires special drivers).
When you said you used the application instead of the software, I assumed you used an APK. However, there is no apk of (the official) Vroot (it was designed to work through Windows). That makes me think the root app you used was something else. So I have to ask... what did you use to root this device?
vRoot is now iRoot
First off, I'd like to thank you for starting this topic. I've searched all over since I bought this tablet a couple of months ago but couldn't find any information. When I did a google search for vroot, i found http://www.mgyun.com/en/getvroot and the software is now called iRoot, and is in english. The main link on the page is for the windows ADB version, and there's a link further down the page for "iRoot for Mobile", which will give you the APK. Now that I've got root, I'll keep trying to get CWM recovery to work, and maybe we can start seeing some ROMs come out for this great device!
UPDATE: (IMPORTANT, please read): The APK does not work. or at least, I couldn't get it to work on my device. It tells you that you've got root, but doesn't really give it to you. Download the computer based exe from the link that Josh8550 posted earlier.
You will need developer permissions (Settings -> About Tablet -> tap Build Number until it tells you you're a developer).
Install ADB and Drivers on windows PC (http://forum.xda-developers.com/showthread.php?t=2588979)
Connect tablet to PC with USB cable.
Run vRoot (iRoot) on PC. Program will connect to tablet and check for root.
Click the "Get Root" button.
Wait...
Tablet will reboot.
Wait...
Program will connect to tablet and check for root.
Program should verify that you have root.
Download and Install SuperSU from the Play Store.
Open SuperSU and Update SU Binary. You will have to give SuperSU root permissions from the chinese interface (choose the box on the right, don't mark the check box).
Reboot.
Congratulations! You now have root access. Enjoy!
More info to come later...
nahrwoldinternet said:
First off, I'd like to thank you for starting this topic. I've searched all over since I bought this tablet a couple of months ago but couldn't find any information. When I did a google search for vroot, i found http://www.mgyun.com/en/getvroot and the software is now called iRoot, and is in english. The main link on the page is for the windows ADB version, and there's a link further down the page for "iRoot for Mobile", which will give you the APK. Now that I've got root, I'll keep trying to get CWM recovery to work, and maybe we can start seeing some ROMs come out for this great device!
Click to expand...
Click to collapse
Thanks man. I couldn't find the link to the apk again so that's a huge help for everyone here. I'll try to get CWM recovery working soon then I'll see about getting Cyanogenmod 11 ported over.
Rooting Digital 2 tablets
Hey everyone.
I successfully rooted with Kingo ROOT using my PC, however now Im stuck. Cant seem to find ROMs or Mods compatible with this tablet.
Any info out there would be great. Im running a 4.1.1 Jelly Bean.
Rooted now what?
Did you ever try the cwmr or cyanogen ROM you had mentioned above?
[email protected] said:
Did you ever try the cwmr or cyanogen ROM you had mentioned above?
Click to expand...
Click to collapse
I did, and ended up hard bricking it for months until I finally got it back out, fixed it and gave up.
I also have the D2-861G and ended up bricking it but have been unable to fix it, would you mind telling me how you got it back up and running.
Hey guys,
I really need to find at least the stock ROM for the new-ish Blu Advance 4.0L (model A010U), because the most recent OTA update unforgivingly bricked mine. Now I want to try to re-flash the stock ROM, but I am also open to custom ROMs, if there are any available. Please help me out! Thanks in advance
I am really surprised no one has replied yet, but again I am facing the same problem and I've been searching the Internet for one month now and I found absolutely nothing for this phone (specifically for version A010U).
So I am going to post a different question in the hopes that someone will read it and help us out:
I have two Blu Advance 4.0 L A010U phones, which are identical except for the color (white and green). They were manufactured a month apart one in 10/2015 and one in 9/2015.
Unfortunately after only a couple of months of light use and for no apparent reason (did not drop it, or wet it, etc) it started going through a boot loop. It will start, show the "bold like us" logo then restart again without making it to the operating system at all. Like I said I've been looking for over a month to find a ROM (stock or modded) to reflash but with no luck. Then I had an idea. Since I have the other identical phone that's working fine, is there a trick I can do using the working phone to create a ROM that I can use in my broken one. By the way, the non working phone will allow me to get into the recovery menu, but unfortunately nothing happens if I wipe the cache or even if I reset to factory defaults.
Anyone knows what's causing that "boot loop", how to fix it and where to find a ROM or even "extract" or "create" one using a working Advance 4.0 L ???
Thank you very much!
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Deuler93 said:
Hey guys,
I really need to find at least the stock ROM for the new-ish Blu Advance 4.0L (model A010U), because the most recent OTA update unforgivingly bricked mine. Now I want to try to re-flash the stock ROM, but I am also open to custom ROMs, if there are any available. Please help me out! Thanks in advance
Click to expand...
Click to collapse
I just got ahold of a couple of these devices myself and am in the process of going through all the in's and out's of them....I'm a Samsung nerd so I haven't messed with something like these in a while but I got one (that was supposedly dead bricked per the lady friend of mine I got them from) at least able to boot into factory mode and recovery via ADB and just as I'm posting this I'm in adb shell going through the device's internal memory.....so we'll see what all I find and can pull out of this one and possibly know enough to post an intelligible reply with solutions next time
The boot looping sounds like a common problem with these and when I get to that point I'm going to get rid of the stock bootanimation.zip ASAP and try something else. I get the idea that these things aren't exactly power houses built for much so the littlest thing or small bug in their coding could lead to this kind of crap happening.
Hopefully you figure yours out before I toss these out the window! lol
Cheers y salud!
---------- Post added at 02:27 AM ---------- Previous post was at 02:20 AM ----------
good.m. said:
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Click to expand...
Click to collapse
Forgot to add a couple things about your post, sorry! I beleive (and I just started digging into this phone) that the no command part is the locked bootloader these phones appear to have. I think it was a combo of holding both volume buttons down from a powered off state then pressing power button on that came up with the option for factory mode or recovery (which led to the sad 'no command' droid), i went into factory mode and theres an option for Tp Upgrade which Im assuming is F/W or something similar but I just hooked up to the PC and in that mode it's reading the internal and external memory of the phone and that's about where I'm at so far.
Wow! I'm surprised this thread is still going.
Anywho, I found a repository that is storing the default ROM for the 4.0L. The files were just added recently. I would have liked to have seen a custom Lollipop ROM made by now, but this device is far too irrelevant to get any attention, unfortunately. Just root and forget, I guess.
I can't wait to try it, thank you! And btw, were you able to get root successfully and if so, how?
Deuler93 said:
Wow! I'm surprised this thread is still going.
Anywho, I found a repository that is storing the default ROM for the 4.0L. The files were just added recently. I would have liked to have seen a custom Lollipop ROM made by now, but this device is far too irrelevant to get any attention, unfortunately. Just root and forget, I guess.
Click to expand...
Click to collapse
Hey Deuler93 -
You have my respect for digging out that BLU ROMs link and sharing with the rest of us. I downloaded the one for my Advance and used SP flash tool to flash the phone that was stuck on a boot-loop. Of course first I had to download and install the MediaTeK drivers for USB connectivity with my PC. Everything worked flawlessly, no glitches what so ever. All these links are easily found and widely available online if anyone is interested I can share here too. I just hope that this boot-loop was due to some software glitch and not hardware failure. Everything seems to work fine for now, keepint my fingers crossed it will NOT happen again.
Well, one less headache to worry about. By the way we're not that far, if you're ever in the Chicago area, I owe you a beer or something. Thank you!
Hi guys !
Thank you very much for the Advance 4.0L Roms.
I have successfuly recovered my phone, but the IMEI got lost.
So, I need to root it in order to recover the IMEI, but I just can´t get success on any method :
Kingroot
Framaroot
Towelroot
is there another way to root it ?
Thank you very much.
I got temporary root using the kingroot apk. But it messed things up and I don't trust it anymore. None of the other mentioned methods worked for me either, maybe try the PC kingroot method
well this helps one thing
good.m. said:
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Click to expand...
Click to collapse
umm. . . when the no command option comes up just press the power button and the rest of options will appear. doesnt exactly solve your problem however unless you have the ZIP file to install, which is what I'm looking for.
What might happen if a ROM is used for another blu phone. ??
A similar phone as well.
Plz advise.
Damn! This thread just keeps going!
I haven't even looked here in a while, so I will bunch my commentary here. I'm also salaried now, so I bought into a OnePlus X (onyx), a more expensive cheapo device, so I do not use the 4.0L anymore.
As for rooting tools, I used the Kingroot APK successfully in the stock environment. I never tried flashing something SuperSU myself, but it could work. Is flashing a SU app possible from the fastboot interface?
And to Steve's question - it is technically possible to flash a ROM for a different device onto your own device, but is considered a bad idea due to the possibility of introducing incompatibilities and missing proprietary requirements. I feel like this would hold especially true to stock ROMs because the manufacturer probably has no interest in supporting anything more than the device that they are manufacturing for. Doing so removes many possible "compatibility" issues from even having to be considered, but I digress. In short, try to find a ROM made for your device and your device only.
Did you find the zip file for the recovery
Marya Wynter said:
umm. . . when the no command option comes up just press the power button and the rest of options will appear. doesnt exactly solve your problem however unless you have the ZIP file to install, which is what I'm looking for.
Click to expand...
Click to collapse
i root my blu advance 4.0l a010u with the kingoroot PC apk, but i got some issues with the lock screen and some apps, so, i need some advice..
i was looking for a zip to use it via recovery but i can't find any..
Recover IMEI
srspinho said:
Hi guys !
Thank you very much for the Advance 4.0L Roms.
I have successfuly recovered my phone, but the IMEI got lost.
So, I need to root it in order to recover the IMEI, but I just can´t get success on any method :
Kingroot
Framaroot
Towelroot
is there another way to root it ?
Thank you very much.
Click to expand...
Click to collapse
You dont need root to recover imei all you have to do is type *#*#84666364#*#* in your dialer and you will be entered in EngineerMode then go into connectivity ,CDS information and radio information phone 1 or 2 then you will see AT+ type something eg.A then backspace and select the first thing you see. Put a space after AT+ and then put you imei code here "IMEI" between these "" You can find your imei by removing your battery it willl be there. After sending command reboot and imei is back.
links are down....check this instead
Hey guys, links here seems to be down .
Maybe this link would be useful for you all... stock firmware can be downloaded and useful help on videos is available too... Enjoy