Does it matter if I upgrade to the new baseband before or after installing Cyanogenmod?
steventrannn said:
Does it matter if I upgrade to the new baseband before or after installing Cyanogenmod?
Click to expand...
Click to collapse
it doesn't matter. the upgrade will revert your ROM to stock & locked either way. You'll need to use the jcase_rootme zip file to get root back after you upgrade to the new baseband. Should be able to find it on here or on android central. I can't remember but I think both forums have links to it.
You want to do it before. The update will revert you back to total stock. Then you need to root and install a custom recovery again. To update to the ZV9 Go here: http://androidforums.com/optimus-v-all-things-root/563443-guide-how-flash-zv9-update-step-step.html
To Root and install a custom recovery in one fell swoop, go here: http://androidforums.com/optimus-v-all-things-root/531810-rooting.html
Don't forget to make a backup of your system in the custom recovery before you try your hand at installing a custom ROM.
Wrong section. You should ask in Q&A
AndyOpie150 said:
You want to do it before. The update will revert you back to total stock. Then you need to root and install a custom recovery again. To update to the ZV9 Go here: http://androidforums.com/optimus-v-all-things-root/563443-guide-how-flash-zv9-update-step-step.html
To Root and install a custom recovery in one fell swoop, go here: http://androidforums.com/optimus-v-all-things-root/531810-rooting.html
Don't forget to make a backup of your system in the custom recovery before you try your hand at installing a custom ROM.
Click to expand...
Click to collapse
Man, THANK YOU, love the oneClick option...finally out of Z9 HELL.
Sorry for the of topic.
Is there a difference between the 3, or a reason to updating the baseband?
Related
All this time, whenever an OTA update is available, I have been unrooting my phone, returning back to stock, allowing the OTA update to run, then applying my root back. I have to think there's an easier way than that to allow my phone to update from 4.0.4 to 4.1.2. All I have is root and CWM, is there a stock 4.1.2 file that I am supposed to be flashing instead of my previous painstaking ways?
serstylz2 said:
All this time, whenever an OTA update is available, I have been unrooting my phone, returning back to stock, allowing the OTA update to run, then applying my root back. I have to think there's an easier way than that to allow my phone to update from 4.0.4 to 4.1.2. All I have is root and CWM, is there a stock 4.1.2 file that I am supposed to be flashing instead of my previous painstaking ways?
Click to expand...
Click to collapse
Checkout the android development section. There are Odin and zip flashable stock rooted updates you can use which are ever so much easier than unrooting and rooting again.
tkepk181 said:
Checkout the android development section. There are Odin and zip flashable stock rooted updates you can use which are ever so much easier than unrooting and rooting again.
Click to expand...
Click to collapse
Thanks.. just ran into this thread too http://forum.xda-developers.com/showthread.php?t=1904099
Gonna read around this evening
serstylz2 said:
Thanks.. just ran into this thread too http://forum.xda-developers.com/showthread.php?t=1904099
Gonna read around this evening
Click to expand...
Click to collapse
Just make sure that when you flash the LJ7 zip, you flash the following files IN ADDITION TO THE ROM
1. Team Epic Root from Recovery
2. Custom Recovery - download one of the recoveries found in the OP in billiard's thread. I'm a big fan of TWRP, but to each their own
If you just flash the zip, then all you're going to do is return your phone to stock with the stock recovery image.
Happy flashing!!!!
I recently took the ota update to 4.1.2 mb1 and lost root. My question is can I use odin to flash [ROM|Stock Rooted] 3/3/13 Sprint Touchwiz Jelly Bean 4.1.2 (L710VPBMB1) Odex/DeOdex? And If so do I use the full ROM odex? And Do I have to flash anything besides the ROM? Or can I keep everything else stock?
Monoclypsus said:
I recently took the ota update to 4.1.2 mb1 and lost root. My question is can I use odin to flash [ROM|Stock Rooted] 3/3/13 Sprint Touchwiz Jelly Bean 4.1.2 (L710VPBMB1) Odex/DeOdex? And If so do I use the full ROM odex? And Do I have to flash anything besides the ROM? Or can I keep everything else stock?
Click to expand...
Click to collapse
Hey there buddy, welcome to XDA (I see this is your second post).
Anyways, do you still have a custom recovery? I'm assuming you don't, since it sounds like you went all the way back to stock unrooted in order o get the update (in the future, Freeza typically has the update for Root users a week or so after the OTA release, so no need to go back to stock unrooted).
Anyways, back to your current situation. Since you most-likely have the stock recovery, you'll have to go back to being rooted with either CWM or TWRP (I prefer TWRP, but they're both good). I personally use mskip's toolkit, it's fairly straightforward. You could also follow qbking77's rooting method. He does a good job explaining how to root. Samsung hasn't locked their bootloader and don't try to in their updates, so these rooting methods stand the test of time (and updates).
Once you have a custom recovery installed (or if you already have one installed), FIRST THING to do is perform a nandroid backup. THIS IS KEY. Once you have one done, go ahead and flash Freeza's Stock Rooted ROM. I'd recommend doing a clean flash, as it's the best way to minimize the chances of errors and bugs. Just wipe system and cache and dalvik cache, and then flash the downloaded ROM. And speaking of downloading, be sure to check the md5 sum of the download before you flash. Most problems with the stable ROMs here on XDA stem from bad downloads.
You can also check out other ROMs. I won't go too crazy on advertising here, but scroll through these two sub-forums, Android Development and Original Android Development. I've enjoyed most ROMs I've tried.
Hope this helps!
ok
topherk said:
Hey there buddy, welcome to XDA (I see this is your second post).
Anyways, do you still have a custom recovery? I'm assuming you don't, since it sounds like you went all the way back to stock unrooted in order o get the update (in the future, Freeza typically has the update for Root users a week or so after the OTA release, so no need to go back to stock unrooted).
Anyways, back to your current situation. Since you most-likely have the stock recovery, you'll have to go back to being rooted with either CWM or TWRP (I prefer TWRP, but they're both good). I personally use mskip's toolkit, it's fairly straightforward. You could also follow qbking77's rooting method. He does a good job explaining how to root. Samsung hasn't locked their bootloader and don't try to in their updates, so these rooting methods stand the test of time (and updates).
Once you have a custom recovery installed (or if you already have one installed), FIRST THING to do is perform a nandroid backup. THIS IS KEY. Once you have one done, go ahead and flash Freeza's Stock Rooted ROM. I'd recommend doing a clean flash, as it's the best way to minimize the chances of errors and bugs. Just wipe system and cache and dalvik cache, and then flash the downloaded ROM. And speaking of downloading, be sure to check the md5 sum of the download before you flash. Most problems with the stable ROMs here on XDA stem from bad downloads.
You can also check out other ROMs. I won't go too crazy on advertising here, but scroll through these two sub-forums, Android Development and Original Android Development. I've enjoyed most ROMs I've tried.
Hope this helps!
Click to expand...
Click to collapse
Ok, just out of curiousity... Before I took the OTA i was rooted 4.1.1 stock with stock recovery. Is there any way to do it the same? The method I used before was this [HOWTO] [ROOT] No Tripping Flash Counter [SPR L710VPBLJ7] JB 4.1.1. It was super quick and easy.
Monoclypsus said:
Ok, just out of curiousity... Before I took the OTA i was rooted 4.1.1 stock with stock recovery. Is there any way to do it the same? The method I used before was this [HOWTO] [ROOT] No Tripping Flash Counter [SPR L710VPBLJ7] JB 4.1.1. It was super quick and easy.
Click to expand...
Click to collapse
Yeah, that same method should work. I personally like the custom recoveries, but understand your desires to leave it at stock recovery (not triggering the flash counter).
Like I mentioned before, Samsung hasn't (and most likely won't) locked their bootloaders, so any rooting method that has worked in the past should work in the future. Just make sure to read the last 3-4 pages of the thread for whatever method you're trying to use to see if there are any issues. I know an earlier version of mskip's toolkit was having issues with JB for a little bit (it's updated now).
Well I'm gonna give it a shot. Ill let you know how it turns out.
Sent from my SPH-L710 using xda app-developers app
Just went with cf autoroot. Worked fine.
Sent from my SPH-L710 using xda app-developers app
I've got a problem I installed the OTA and now I cant boot into android. Its stuck on starting apps. I have the stock recovery. How can I fix this?. What do I do? I can get to ODIN download mode. *edit** can get into safemode too. And I now have a custom recovery installed.
I still dont know what to do from here. How do I flash the downloaded rom because the new file I downloaded seems to be a zip and can only be flashed with CWM not ODIN. I cant place it in the right directory of my phone to do that.
jkj said:
I've got a problem I installed the OTA and now I cant boot into android. Its stuck on starting apps. I have the stock recovery. How can I fix this?. What do I do? I can get to ODIN download mode. *edit** can get into safemode too. And I now have a custom recovery installed.
I still dont know what to do from here. How do I flash the downloaded rom because the new file I downloaded seems to be a zip and can only be flashed with CWM not ODIN. I cant place it in the right directory of my phone to do that.
Click to expand...
Click to collapse
I replied to your thread. I hope it works for what you need.
I currently have Stock 4.2.2 Rom - S-Off - Rooted - TWRP
How can I get to the newest Stock 4.3 (Radios, etc) ?
Is it easier to just flash stock recovery, then take the update, then flash TWRP and superuser back?
Or has someone made the update into a root-friendly flash-able zip yet?
Thanks in advance if this is a dumb question, but I wanted to ask so I get it right the first time.
sdlucky7 said:
I currently have Stock 4.2.2 Rom - S-Off - Rooted - TWRP
How can I get to the newest Stock 4.3 (Radios, etc) ?
Is it easier to just flash stock recovery, then take the update, then flash TWRP and superuser back?
Or has someone made the update into a root-friendly flash-able zip yet?
Thanks in advance if this is a dumb question, but I wanted to ask so I get it right the first time.
Click to expand...
Click to collapse
Look here >>>>
santod040 said:
Look here >>>>
Click to expand...
Click to collapse
Thanks for the info...
So I can just flash these with no loss of data? Or do will I need to restore data after I flash the rom?
My plan would be:
1) flash "Odexed Full ROM"
2) flash "2.10.605.1 firmware"
That should put me latest update stock right? (I might need to re-flash superuser)
I can flash all of this through TWRP?
sdlucky7 said:
Thanks for the info...
So I can just flash these with no loss of data? Or do will I need to restore data after I flash the rom?
My plan would be:
1) flash "Odexed Full ROM"
2) flash "2.10.605.1 firmware"
That should put me latest update stock right? (I might need to re-flash superuser)
I can flash all of this through TWRP?
Click to expand...
Click to collapse
You cannot flash the firmware in twrp.
It has to be done following the instructions in the post.
I would do firmware and then the rom.
Put the rom on your internal storage before flashing the rom.
Flash the firmware as instructed, then in recovery flash the rom, reboot.
Do not try to reboot in between, it wont work.
If you do it in that order you won't have to wipe, you will be on the latest OTA and have a rooted boot.img.
Supersu is installed already. You can prevent it from updating or flash the newest one here.
Read the OP and post#2 and follow it you should be fine.
Yes you want odex coming from full stock...
Thank you for all of the help santod040 !!
Your files and instructions worked perfectly.
I'll make sure to check in on your threads when the 4.4 update comes around.
Hello guys
I cant install cwm recovery on my e980 using the freegee app. Can anyone help me with that issue
See the attached files
laith1234 said:
Hello guys
I cant install cwm recovery on my e980 using the freegee app. Can anyone help me with that issue
See the attached files
Click to expand...
Click to collapse
Two options:
1) flash back to stock 4.1.2, root and install cwm via freegee
2) install gpro_recovery.apk from forums, flash recovery from there, update that dinosaur (I think it's 6.0.4.4) to something newer (Philz, which is slightly newer or latest TWRP available) and profit.
Thanks again shadi
But u mean to flash the gpro recovery using odin? (The old familiar way)?
Odin is for Samsung devices Which option confuses you?
I cant access the recovery mode so how can i flash the gprorecovery?
You download an APK called GPRO recovery, install it, and flash from there. After that, update recovery and enjoy.
To be honest with you, better option is to return back to Jellybean and start from there, possible less problems (wakelocks, deep sleep, battery drains etc.)
I did what ShadySquirrel said myself, It took a lot of looking and reading. Used the LG flash tool to go back to 4.1.2 then used I believe easy universal root where you connect the phone to the pc with charge only chosen under pc connections, then on the pc you run the bat file and it tells you what to do and roots the phone, checked root with a root checker app then used FreeGee to install cwm and twrp. So far so good. Good luck like I said it took a lot of reading.
Many thanks again for both of you...
ShadySquirrel said:
You download an APK called GPRO recovery, install it, and flash from there. After that, update recovery and enjoy.
To be honest with you, better option is to return back to Jellybean and start from there, possible less problems (wakelocks, deep sleep, battery drains etc.)
Click to expand...
Click to collapse
shady i have an inquiry, do you recommend to go back to jellybean and then update the phone through the air? OTA update? or you mean to go back to JB and then start rooting and installing recovery?
as i understood from what you recommend is to go back to JB and then root and install recovery, but you mean to stay on JB??? and if not what i will get from returning back to JB, root and install recovery as im going to upgrade again to KK?
laith1234 said:
shady i have an inquiry, do you recommend to go back to jellybean and then update the phone through the air? OTA update? or you mean to go back to JB and then start rooting and installing recovery?
Click to expand...
Click to collapse
laith1234 said:
as i understood from what you recommend is to go back to JB and then root and install recovery, but you mean to stay on JB??? and if not what i will get from returning back to JB, root and install recovery as im going to upgrade again to KK?
Click to expand...
Click to collapse
Depending on what you plan to do.
If you want to use any non-stock based ROM out there (CM, Bliss, Slim etc.) it's better to return back to stock 4.1.2, root, flash recovery (Freegee + new TWRP after that) and start flashing. This way, you have great chances to avoid random wakelocks, problems etc. , which are typical for moving from stock 4.4.2 to any other ROM.
If you want to keep using stock ROM, well, you're in a problem because freegee doesn't support Kitkat, so you'll have to root, install GPRO_recovery.apk, flash it's recovery and then try flashing recovery from freegee or try flashing new twrp. If you want to stay on stock 4.1.2, then it's the previous cycle (root, Freegee, twrp update) and that's it.
If you decide to use stock roms, DON'T install OTAs, you'll get a soft brick because of custom recovery.
ShadySquirrel said:
Depending on what you plan to do.
If you want to use any non-stock based ROM out there (CM, Bliss, Slim etc.) it's better to return back to stock 4.1.2, root, flash recovery (Freegee + new TWRP after that) and start flashing. This way, you have great chances to avoid random wakelocks, problems etc. , which are typical for moving from stock 4.4.2 to any other ROM.
If you want to keep using stock ROM, well, you're in a problem because freegee doesn't support Kitkat, so you'll have to root, install GPRO_recovery.apk, flash it's recovery and then try flashing recovery from freegee or try flashing new twrp. If you want to stay on stock 4.1.2, then it's the previous cycle (root, Freegee, twrp update) and that's it.
If you decide to use stock roms, DON'T install OTAs, you'll get a soft brick because of custom recovery.
Click to expand...
Click to collapse
many many thanks for this explanation, but i decided to stay in stock KK, so i maybe in a little problem, so i will stay in KK and root my device without installing the recovery, then i will be OK
Many thanks again,,,,
my m9 has received an android 6 update massage. but after installing, the phone restarts in custom recovery.
please help me how to upgrade my rooted m9 to an official marshmallow. i do not want to upgrade to a custom ROM
excuse me, my English is so weak
How did you upgrade to Marshmallow with a custom recovery as that isn't possible...
Tell us what you have flashed...g
sjmahmoudi. persiangig . com / image / d .jpg
i could not upgrade to marshmallow. i received an OTA upgrade message. i download first part and then a installing confirmation widows appeared and when i confirmed it the phone restarted and boot on custom recovery.
since i am xda new user i can not ad links to my posts. a link to a screenshot of my phone is above this post. i add some SPACES to it so i can post it
In order to upgrade to official MM....you need a stock recovery image...and a stock system image...
Search for...and flash your stock recovery....if that is the only thing you have changed....g
gregsarg said:
In order to upgrade to official MM....you need a stock recovery image...and a stock system image...
Search for...and flash your stock recovery....if that is the only thing you have changed....g
Click to expand...
Click to collapse
thank you.
i just want to upgrade to android 6.
i know that i can flash custom roms with custom recovery. is it possible for me to download an stock system image and flash it with custom recovery the same way? i do not want to make everything back to its original. i want a rooted android 6 with custom recovery.
-----------------
i had some search. if i upgrade to stock android, then i will have to root my phone again and for that i have to flash a custom recover again. i searched and find out that android revolution custom ROM is a good choice for ones how wants to keep HTC Sense.
thank you for your support.
Check here for possible stock system images and recoveries...
You should be able to flash a stock system backup from this thread...to include recovery....then take your OTA....and flash TWRP afterwards....
Just make sure everything matches your carrier....cid/mid....so the outcome is favorable...g
http://forum.xda-developers.com/showthread.php?t=3132698
You'll quickly find, if you haven't already, that the latest Android Revolution HD (v20) requires you to have the latest firmware. Flashing it without it will throw your phone into a boot loop.
gregsarg said:
In order to upgrade to official MM....you need a stock recovery image...and a stock system image...
Search for...and flash your stock recovery....if that is the only thing you have changed....g
Click to expand...
Click to collapse
If he has removed his carrier's bloatware as well as the custom recovery, would he have to flash the system image also?
Or just flash the recovery?
I am asking as many AT&T users often root to remove AT&T bloatware, like I did. I used HTCDev.com to root, and my bootloader is unlocked.
Soundwve said:
If he has removed his carrier's bloatware as well as the custom recovery, would he have to flash the system image also?
Or just flash the recovery?
I am asking as many AT&T users often root to remove AT&T bloatware, like I did. I used HTCDev.com to root, and my bootloader is unlocked.
Click to expand...
Click to collapse
Flashing a stock RUU will guarantee that the system and recovery are completely stock...
The OTA scans the device prior to update and will detect any software that isn't signed or official...
I'd RUU back to stock...then OTA will prompt....and won't get stuck trying to update the system partition...g