Develop Bugs

[DFT] MAGLDR 1.13 released [AD RECOV support added] **DO NOT ASK FOR RELEASE DATES**

MAGLDR 1.13
After long (about 4 months) under awful developing, DFT proudly presents MAGLDR bootloader - The first bootloader with built-in Tetris!
LEO512 and LEO1024 are supported both.
MAGLDR doesn't replace OSPL/HSPL. It runs in the chain after. So it's safe to install and remove it.
You need HardSPL 2.08 before installation!
History:
V1.11 fixed "GO GO GO stuck issue".
V1.12 added WPH support.
V1.13 added AD Recovery support, fixed few bugs.
Installation:
You need radio which support 576 RAM.
Run ROMUpdateUtility.exe and install it.
Notes:
"Boot AD SD" - boots android from SD card.
zImage and initrd.gz loaded from directory selected via "AD SD Dir" menu.
rel_path=%ADSDDIR% added to kernel command line.
"Boot AD NAND"- boots android from NAND.
zImage and initrd.gz loaded from YAFFS2 partition with "boot" flag.
"Boot WPH" - boots WPH from nand. WPH must be flashed before.
"USB MassStg" - provide SD card as USB Stick to computer. You can copy files via it directly without OS.
Allow to change kernels fast for Android developers.
THIS FEATURE IS STILL EXPERIMENTAL. BE WARNED.
"USB Flasher" - use this item to flash Android or WPH.
"USB TTY" - need same drivers like MTTY for SPL access
"AD HardReset"- erase android partitons with "hr" in the flags. usually you need erase userstore.
"Tetris" - Tetris game. Get 111111 score to activate hidden features of MAGLDR
"DMESG to SD" - dumps dmesg android log to SD card. useful for developers. EXPERIMENTAL.
"DumpUDtoSD" - dumps asize partition to SD card. BUGGY, SLOW and not tested. Don't use it.
"UseLast24NAND" - allow to use last 24 megabytes of NAND. EXPERIMENTAL.
But if you update MAGLDR via RUU or press WM65 hard reset keys.
you will lost this 24 megabytes of data. I
It means data will be corrupted or device won't boot more.
Default is OFF.
Use "Home" key to return back from submenu.
Use "Power" key to enter main menu during autoboot.
New in MAGLDR113 :
*Added support for Android Recovery
*Added support for raw boot partition format (like in native android devices)
*Fixed USBMassStorage data lost on big transfers
*Fixed Power-Off-Cable-Plug-Stop. Phone now detects this situation and reboots. Battery controller inside LEO needs runtime control during charge, it implemented in OS.
*V1.13 still compatible with 1.10 1.11 1.12. Future version maybe not compatible with previous, be warned.
*Added option "ClearSD MBR". which erase MBR, so card can be formatted via any program after WP7 boot ("200 Mb problem").
Future developerment :
*planned to add Haret's startup.txt support for Android SD
*fast boot support (?)
*support of fixed partitions layout with ability to reflash any partition
*WM65 NAND boot with any rom (?)
*WM65 NAND boot with special designed roms for MAGLDR boot.
Disclaimer
This product is free to use at your own risk. We take no
responsibility for any conflict, fault, or damage caused by
this unlocking procedure. No warranties, implied or otherwise, are given if you agree to use this product.
No problems were found while testing this product on several different devices, your experience may vary.
This software is free, but not open source.
Download links
V1.13
Download NOW! (Right Click and 'Save Link As')
V1.11
Download NOW! (Right Click and 'Save Link As')
V1.10
Download it NOW!
Mirrows:
http://box.noobhands.com/magldr/DFT_LEO_MAGLDR110.rar
http://box2.noobhands.com/magldr/DFT_LEO_MAGLDR110.rar
http://box3.noobhands.com/magldr/DFT_LEO_MAGLDR110.rar
http://box4.noobhands.com/magldr/DFT_LEO_MAGLDR110.rar
http://box5.noobhands.com/magldr/DFT_LEO_MAGLDR110.rar
http://box6.noobhands.com/magldr/DFT_LEO_MAGLDR110.rar
Thread about LEO "Stock" Android NAND ROM
You can report bugs & suggestion & problems in this thread.
HAPPY NEW YEAR!,
30.12.2010
-DFT

Great job Cotulla , go go go

grats to the team! you guys need to take some time off now!

You guys are great, this is such a great thing to have for our devices!

O my good....Thanks very much @cotulla and DFT! HAPPY NEW YEAR!

Yeah Cotulla!! Your the best! Can't Wait to get this running!

Downloading right now !

Woooooow.. great work Cotulla. thanks so much

Is this replacement for HSPL????
or it works under HSPL. I just need simple answer???

come on downloading now cant wait to get rid of winmo!!!!

Game on...
Ready to go

thank ypu sohhhh much

Making it a sticky if you don't mind

OMFG Again nice one

Thank you DFT!
wow

Thanks for the great work.

Ermmm....excuse me for the noob question but this thing will get rid off windows of my Mobile's Nand and will be replaced with Android??????? Can someone guide us how to do it? I don't want to brick my phone!

you made %dunnahowmany% pepole happy :X thx for your work :xxx

A really great Job!!
Thanks to developers.

Great work! Thanks Cotulla!!

[07 JAN][NAND][ROM-ZIP][Discontinued] HD2ONE 1.2 CM6.1.1 for CWR

Discontinued​I'll make this short and sweet. Thanks to RaiderX303 recent work porting over clockwork recovery we can now flash roms in the update.zip format directly from sd with no need for a pc to flash a new rom. This allows most importantly the ability to to create Nandroid backups and restores.
Using RaiderX303 method I repacked my favorite ROM into a zip package ready for Clockwork Recovery.
Rom is Kouno.Takaaki's HD2ONE 0.3.6. This is based on his original release and everything should work just as it did before on this rom.
Please don't ask questions as to why this doesn't have xyz, or sense this or that, this is a close to stock vanilla android mod, if you want pretty sense skins, or don't like the way it looks, then get a sense rom.
His original thread http://forum.xda-developers.com/showthread.php?t=823471
Intrid.gz is updated to his newest version as of 1.2, details here http://forum.xda-developers.com/showthread.php?t=898067
Kernel is now Prj's .3, which is based off Hastarin's 8.6, modified for nand use. Feel free to update using the method in the Intrid.gz thread if you want a different kernel.
First you need to install clockwork recovery which has been ported by RaiderX303...
http://forum.xda-developers.com/showthread.php?t=898913
Then ...
How to flash;
1: Boot into Clockwork Recovery
2: Select install zip from sdcard
3. Select choose zip from sdcard
4: Select ROM file (HD2ONEupdate.zip) and then confirm
5: Wait for All Done! message
6: A wipe is recommended but not always required, if you experience force closes or things not working, try wiping before posting problems.
Please remember, I am not the original chef for this ROM, I have only repacked it into a format suitable for clockwork recovery so keep questions related to the underlying rom to the original forum. Also if you haven't read anywhere else, when you switch over to clockwork recovery method your userdata will be wiped so backup accordingly.
Download Link:
V. 1.2 http://www.multiupload.com/86KDPU1BXO
Wifi Tether App: http://www.multiupload.com/XVVRIFG83F
V. 1.1 http://www.multiupload.com/UR329DN289
V. 1.0 http://www.multiupload.com/06Q70SASLA
Changelog:
Version 1.2 01/07/2011
-Problems with intrid.gz not recognizing /.data/config.txt should be resolved. Changes to config.txt should now work properly.
-Kernel updated to prj's .3
Version 1.1 01/05/11:
-Updated Intrid.gz to Kouno.Takaaki v1.1 Ramdisk(should make update systemfiles,kernel,etc easier) See original thread for more details http://forum.xda-developers.com/showthread.php?t=898067
-Added Google Talk app and Google News/weather widget to systemapps as not downloadable from market, for all other google apps, ie. gmail,youtube, etc, download the newest version from market.
-Small modification to default MMS settings for Tmobile US users to fix mms send issues. If creating new data img settings will load by default, otherwise goto settings,wirelessnetworks,mobilenetworks,accesspoint names, menu button, reset to default, this will get you updated mms settings for tmobile us.
-If coming from 1.0 you should be able to do a no wipe update in recovery without problems.
Verson 1.0 01/04/11:
- Initial Release
Credits to;
Kouno.Takaaki for his Rom
RaiderX303 for his work on porting Clockwork Recovery
Cotulla + DFT - For MAGLDR and all the great work thats gone into NAND on the HD2
CyanogenMod Team - For the great recovery that allows flashing custom roms
Anyone else who has contributed to android on the HD2

Thanks, wanna try..

What a beautiful day

what initrd and zimage did you use for this rom.zip?
thanks..

rmnet or ppp? thanks!

Hi, I try to change the density with 200 in /system/build.prop. But it is not work when I restart my phone?
Is there a problem? I saw that the rom is based on CM build. But I can change it on CM 6.1.1 build. Could you please help me to take a look?

flashed fine but then just sits at the green htc screen...
did hard reset..same thing...boots to green htc screen.
thnx to titanium backup im back where i started 15 mins later

Does it support data.img on sdcard?

tried this but getting a nand kernel open failed when magldr tries to load the rom any ideas?? Do i have to supply my own kernel??
Ricey

Ok to address some questions and issues.
Build is RMNET, again based on original Nand HD2ONE.
Kernel is proj .2 which is based off of Hastarins Kernels.
Intrid is also from HD2ONE nand build so... it supports data.img to sd (off by default), therefore you must create a folder in the root of your SDcard and do the following:
Name folder. ".data"
Inside ".data" , Name a new txt file "config.txt"
Then you can add any of the following lines:
data2sd=0
- default nand userdata
data2sd=1
- enable data.img support
data_size=512
- size of data.img, only work when data.img support enabled
- default 512
lcd_density=240
- change the size of icons
- default 240
gps_zone=us
- country code, us, fr, jp, etc
- default us
As for people having issues booting or getting stuck at green htc, I would give a few pointers, if first boot then keep in mind the build is creating a new data file and first boot could take 10 minutes, so be patient. Second if getting issues with magldr saying it can't load a particular file/kernel, you probably had a bad flash and I would start by doing a wipe within clockwork recovery and reflash.

bigfoots1 said:
flashed fine but then just sits at the green htc screen...
did hard reset..same thing...boots to green htc screen.
thnx to titanium backup im back where i started 15 mins later
Click to expand...
Click to collapse
Fix permissions after flashing could help
Works just as HD2ONE should - flawlessly Thanks a lot

ok, I thought i had waited 10 minutes...
wasnt sure if it was building or not.
i will try again and wait it out.
like i said titanium backup to the rescueif needed anyway...
Thank you!
drewestate said:
Ok to address some questions and issues.
Build is RMNET, again based on original Nand HD2ONE.
Kernel is proj .2 which is based off of Hastarins Kernels.
Intrid is also from HD2ONE nand build so... it supports data.img to sd (off by default), therefore you must create a txt file in the root of your SDcard and do the following:
Name new txt file ".config" (without quotes)
Then you can add any of the following lines:
data2sd=0
- default nand userdata
data2sd=1
- enable data.img support
data_size=512
- size of data.img, only work when data.img support enabled
- default 512
lcd_density=240
- change the size of icons
- default 240
gps_zone=us
- country code, us, fr, jp, etc
- default us
As for people having issues booting or getting stuck at green htc, I would give a few pointers, if first boot then keep in mind the build is creating a new data file and first boot could take 10 minutes, so be patient. Second if getting issues with magldr saying it can't load a particular file/kernel, you probably had a bad flash and I would start by doing a wipe within clockwork recovery and reflash.
Click to expand...
Click to collapse

15 minutes and counting...still sitting on green htc screen...

please explain...
if there are extra steps needed then why isn't that mentioned prior to this?
schremer said:
Fix permissions after flashing could help
Works just as HD2ONE should - flawlessly Thanks a lot
Click to expand...
Click to collapse

Since this incorporates Clockwork Recovery, can this now be used to swap kernels as well?

25 minutes at the green htc screen. I think its safe to say this has nothing to do with the data file be created. it doesn't work.
followed instructions, it flashes the zip and after reboot it just sits at htc screen...
I think im done messing with this untill i see others who have actually got this to flash and boot properly...
if there is another step then please state it...nebulous comments like "change permissions" are useless
Thanks..

bigfoots1 said:
please explain...
if there are extra steps needed then why isn't that mentioned prior to this?
Click to expand...
Click to collapse
It depends Owning android phone before used to fix permissions after flashing.
Sent from my HTC HD2 using Tapatalk

This build is freakin good
But I have a little problem with me settings.. if I want to go to settings -> sounds the whole settings fc
Tried it with fixin the permissions in the CW mod, but didn't work.. someone else has this issue?

lol..so basically your talking out your ass?
schremer said:
It depends Owning android phone before used to fix permissions after flashing.
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse

bigfoots1 said:
lol..so basically your talking out your ass?
Click to expand...
Click to collapse
I'm not sure if understood you right. Anything personal?

[ROM | 1/5/2011] - NANDDROID - Android Froyo X Ginger Build

HTC Touch HD NANDROID Thread
!! Important !!
Guys i now jack-all at the moment for the Touch HD NAND Process, So dont even contemplate the idea of asking me !! Go to Tida8s forum, and ask there !
Although i already know YOU Will, But for those who have forgotten !!
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
Change Log
- 7-7-2011 Vir Twitter
Hi, guys News on blackstone nand. Maybe Sunday I will have the new files for the testing team.
- 1-07-2011
- 23-6-2011 Vir Twitter
Just give it the final touch. So it's official NAND BLACKSTONE 7/1 GET READY GUYS. THANKS GUYS
- 13-06-2011 07:36 AM.
-i will be using froyo x ginger w/o gapps (READY)
-building nbh (ready)
-working with the recovery.img (now)
- 14-6-2011 05:11 AM
UPDATE
ok guys. maybe friday i will be uploading FROYO X GINGER NAND FOR BLACKSTONE
just take a look inside the build update. and let me know if everything is good or if we need to add anything. thanks guys. eta: friday. build only
- 12-6-2011 Vir Twitter
(build) FROYO BLUE CWM 2011.06.12. blackstone. ready.
Youtube NAND v2 on Tida8's Touch Pro 2
- 10-06-2011 11:15 PM
update nand build. OK GUYS, GREAT NEWS. WE HAVE DATA WORKING. OH MAN THIS IS GETTING GOOD NOW. SO WE HAVE WIFI AND DATA WORKING.
- 10-06-2011 04:56 PM
update on blackstone nand
1-froyo x ginger blackstone nand is ready (rom)
2-building the blackstone.NBH now
thanks
- 08-06-2011 04:56 PM
Update on blackstone nand
Ok guys, I just went online to track my phone it will be here tomorrow.
1- I already have froyo x ginger ready with w/o gapps. That's the build that I will be using
2- need you guys to relax. This take time.
3- please don't ask for eta. It will be done when is done.
3- I will keep you guys updated on the proccess.
4- remember thanks to the A TEAM we have nand. It just a matter of time till our devices can have it. But we need people for this to happen
5- eventually I will get more devices, cuz the the only way to start nand testing is to have those the devices
6- my goal is see every device with nand. And to tell you guys the truth I can't do it by myself. Yes it will take time
7- I'm going to talk with tracker to see if we can have an IRC for . maybe
Also remember guys. I have a family outside android. 2 kids and a wife plus a job and a house. I'm always super busy
It's official nand testing for blackstone it' here guys
Sent from my CDMA BLAZN 2.2.2 NAND VERSION using Tapatalk
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
- NAND Tutorial
Page 1 By Tida8
setup you sdcard. format your card to fat32 and add this 3 updates
-froyo blue blackstone nand build
- kernel update
-root update
1-first we need to get android sdk set up for you devices.
http://dl.google.com/android/installer_r11-windows.exe (this the exe files) (Recommended)
http://dl.google.com/android/android...11-windows.zip (this the zip)
2- create 2 folder on you C: driver
- RUU (already has the ruu_signed.NBH AND task29)
- ADB (already has the recovery.img)
-download BlackstoneAdvancedRUU and unzip folder.
http://www.multiupload.com/RLJEC2GRCH
for more info on this ruu http://forum.xda-developers.com/showthread.php?t=943851
-download adb and unzip it in your adb folder http://www.multiupload.com/NEEPYUDO6T
3- set up path for your adb and fastboot
right click my computer on your desktop pc. advanced system settings. environment variables. then system variables and double click on path. add this line at the end. just like that
;C:\adb
click ok everything
4- test adb
-boot any build (blue, ginger, frx06. etc....)
-download PdaNet http://www.multiupload.com/OVJ9V01M4F now install pdanet and follow the screen. pdanet will ask to connect your phone. let it finish. when done disconnect usb.
-on your android build go to settings/applications/development/ and check ubs debugging, stay awake, and allow mock locations. now connect you usb
-on your pc. start, run, type cmd, and type adb devices and enter
- you should see your device. you may see this 00000000000 device. that's ok that's your device ID
- great adb is working
5- set up fastboot (the set up for fastboot is done when you flash RHODIMG.nbh)
-when you see the blue screen with usb connected fastboot driver will install. that all
6- [TUT][HSPL] Hard-SPL Unlocker for Blackstone
http://forum.xda-developers.com/showthread.php?t=431217
7- task29 set up ( this will erase windows mobiles) this tool is very important to flash nand or if you want windows mobile back on your phone
-turn off your phone. press vol down and power. you will see the (tricolour screen!). connect your phone usb. it may install drivers so wait till finish.
-open RUU folder on your c: driver pc
-right click on BlackstoneAdvancedRUU.exe and choose run as administrator and follow the screen. then the phone will reboot. but it wont pass the htc boot screen, just take the battery out.
8- flashing LK bootloader ruu_signed.NBH
- turn off your phone. press vol down and power. you will see the (tricolour screen!). connect your phone usb. it may install drivers so wait till finish
- open RUU folder. right click on BlackstoneAdvancedRUU and choose run as administrator. follow the screen. then the phone will reboot. you should see the blue screen. it may install drivers so wait, when finish you will see fastboot mode at the bottom in small letters. if nothing happen just pull the battery. read guide 9 recovery.img
9- how to flash recovery.img
-put battery back and connect your phone usb
-click on power. you will see blue screen look for fastboot mode at the bottom.
-on your pc. go to run type cmd and type this command to get to adb folder on your c: drive
cd C:\adb
then type
fastboot flash recovery recovery.img
wait till it finished. then to get to recovery mode type
fastboot boot recovery.img
the end key is (enter) vol down and up is to move. install updates in this order
-froyo blue build update
-kernel update
-root update
10- when done reboot. take the usb cable out. and welcome to nand
good luck and god bless you all
GUYS, ANYTHING ELSE THAT YOU GUYS WANT ME TO ADD PLEASE LET ME KNOW
i'm still updating this page-----------------------------
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
Page 2 by explicit
NOOB guide for blackstone nand BY explicit
IMPORTANT!!! If you don't have HARD SPL installed on your phone do not continue.You must have HARD SPL for Blackstone installed on your phone
More about HARD SPL in step 6.
Format your micro SD card to fat32.
Add this 3 files from NAND BLACKSTONE FULL PACKAGE
-update-blackstone-nand.zip
- kernel update.zip
-root update.zip
1. Download the android-sdk for your system and install everything on it. Android-sdk depends on Java SE Development Kit (JDK), so if you
don't have java Development Kit installed dovnload it and install it before installing android-sdk. Even after installing On x64 OS you still may get
Java not found during the installation of android-sdk.In that case click Back and than again Next. It should find it now.
Java Development Kit download: http://www.oracle.com/technetwork/ja...ads/index.html
Android-sdk download.Choose installer_r11-windows.exe (Recomended) http://developer.android.com/sdk/index.html
2. Create 2 folders on your C:\ drive
- ruu ( Here we need to have BlackstoneAdvancedRUU from the link below and ruu_signed.nbh from BLACKSTONE NAND FULL PACKAGE)
- adb ( here we need all files from the adb link below)
-download BlackstoneAdvancedRUU and unzip it un the ruu folder from above.
BlackstoneAdvancedRUU http://www.multiupload.com/RLJEC2GRCH
for more info on this ruu http://forum.xda-developers.com/showthread.php?t=943851
-download adb and unzip it. Copy all the files from the extracted archive in the adb folder above.
The path to adb.exe should be like this C:\adb\adb.exe
adb http://www.multiupload.com/NEEPYUDO6T
3. Set up path for your adb and fastboot
right click my computer and select properties. Now go to advanced system settings. Under the Advanced tab at the bottom select Environment Variables.
Under System variables find the line "path" For the Variable name stays path and for the Variable value at the end add this ;C:\adb
Close all windows with clicking OK.
4. test adb
-boot any build (blue, ginger, frx06. etc....)
-download PdaNet http://www.multiupload.com/OVJ9V01M4F now install pdanet and follow the screen. pdanet will ask to connect your phone. let it finish. when done disconnect usb.
-on your android build go to settings/applications/development/ and check ubs debugging, stay awake, and allow mock locations. now connect you usb
-on your pc. start, run, type cmd, and type adb devices and enter
- you should see your device. you may see this 00000000000 device. that's ok that's your device ID
- great adb is working
5. Set up fastboot (the set up for fastboot is done when you flash ruu_signed.nbh from NAND BLACKSTONE FULL PACKAGE)
-when you see the blue screen with usb connected fastboot driver will install. that all
6- [TUT][HSPL] Hard-SPL Unlocker for Blackstone
http://forum.xda-developers.com/showthread.php?t=431217
7. Task29 set up ( this will erase windows mobile from your phone) this tool is very important to flash nand or if you want windows mobile back on your phone
-turn off your phone. press and hold Volume down and power on your phone. you will see the (tricolour screen!). connect your phone to usb. it may install drivers so wait till finish.
-open RUU folder on your c: drive
-right click on BlackstoneAdvancedRUU.exe and choose run as administrator, select "Perform Task 29 only" and follow the screen. then the phone will reboot,
but it wont pass the htc boot screen, just take the battery out.
8. Flashing LK bootloader ruu_signed.NBH
- turn off your phone. press and hold Volume down and power on your phone. you will see the (tricolour screen!). connect your phone via usb. it may install drivers so wait till finish
- open RUU folder. right click on BlackstoneAdvancedRUU and choose run as administrator. Select Custom RUU (Task 32) and follow the screen. then the phone will reboot. you should see the blue screen.
it may install drivers so wait, when finish you will see fastboot mode at the bottom in small letters. if nothing happen just pull the battery. read guide 9 recovery.img
9. How to flash recovery.img
-put battery back and connect your phone via usb
-click on power. you will see blue screen look for fastboot mode at the bottom.
-on your pc. go to run type cmd and type this command to get to adb folder on your c: drive
cd C:\adb
then type
fastboot flash recovery recovery.img
wait till it finished. then to get to recovery mode type
fastboot boot recovery.img
the end key is (enter) vol down and up is to move. install updates in this order
-froyo blue build update
-kernel update
-root update
10- when done reboot.
Read more:
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
!! Important !!
Guys i now jack-all at the moment for the Touch HD NAND Process, So dont even contemplate the idea of asking me !! Go to Tida8s forum, and ask there !
Although i already know YOU Will, But for those who have forgotten !!
Click to expand...
Click to collapse

waiiiiiiiiiiiiiiiiiiiiting

mero0100 said:
waiiiiiiiiiiiiiiiiiiiiting
Click to expand...
Click to collapse
yeah, but i think it sahould be done by tonight or tomorrow

Really hope so.. I keep my fingers crossed about two weeks

NandDroid htc hd
I hope someone can make it.... i can't wait for it!!!! From C.R.

even more fun to know that he was also working on a nand version of gingerbread and honeycomb

Sounds interesting!
Sent from my MZ604 using XDA Premium App

Simon_WM said:
yeah, but i think it sahould be done by tonight or tomorrow
Click to expand...
Click to collapse
i didn't want to disappoint you but tiad say that he will buy blackstone to make trials on it till now he didn't have blackstone so not tomorrow
hope i am wrong and you are right as i want to play with android also

mero0100 said:
i didn't want to disappoint you but tiad say that he will buy blackstone to make trials on it till now he didn't have blackstone so not tomorrow
hope i am wrong and you are right as i want to play with android also
Click to expand...
Click to collapse
... would could be right, but either way if he is going to this is a massive step towards getting NAND !!

I love it. Keep it up. Waiting n waiting n waiting........
Sent from my HTC HD2 using XDA App

mel69hash said:
I love it. Keep it up. Waiting n waiting n waiting........
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Yup, patients is the game

Entering lotus position, waiting...

Guys?
I am little bit off but why are u so happy? NAND means that we will have full android on our blackstone? withnout emulating or things like that? Will it actually work properly?
thank u for response

OMG Nice
And i think my Blackstone is Crap now if full NAND comes yeah Baby ;D

unstable_ said:
Guys?
I am little bit off but why are u so happy? NAND means that we will have full android on our blackstone? withnout emulating or things like that? Will it actually work properly?
thank u for response
Click to expand...
Click to collapse
Just because Android is flashed on the phone instead of WinMo doesn't do magic. It will probably perform the same as from SD-card in case of problems. I believe R/W speed is somewhat faster from nand (different type of ROM than SD-card).
Edit. Besides, isn't there still some problems with nand on GSM phones?
Please fill me in here...

i can see everyone is just waiting to be done,and almost no one is actually contributing...not even with a small donation,because the guy is going to buy the phone so he could provide us something we have eagerly waited for,so even one dollar would be appreciated i am sure

farukb said:
i can see everyone is just waiting to be done,and almost no one is actually contributing...not even with a small donation,because the guy is going to buy the phone so he could provide us something we have eagerly waited for,so even one dollar would be appreciated i am sure
Click to expand...
Click to collapse
Not that i would really be in android/nand/... but i noticed this debate. The problem is that there were just too many false prophets with no results. I would rather recomend a donation to download (like xming) so people can donate for results not for good wishes.

farukb said:
i can see everyone is just waiting to be done,and almost no one is actually contributing...not even with a small donation,because the guy is going to buy the phone so he could provide us something we have eagerly waited for,so even one dollar would be appreciated i am sure
Click to expand...
Click to collapse
Am waiting on the release, then will help with doing bug testing and so on =D

root said:
Not that i would really be in android/nand/... but i noticed this debate. The problem is that there were just too many false prophets with no results. I would rather recomend a donation to download (like xming) so people can donate for results not for good wishes.
Click to expand...
Click to collapse
true (10 chars)

farukb said:
true (10 chars)
Click to expand...
Click to collapse
Yeah, for Android development, i think that seems fair,
What do you guys think ?

[ROM][NAND][CM7.2]unofficial Android 2.3.7 for Rhodium 2013.07.09

CM7 for Rhodium
Big thanks to ACL, detule (agps), pcgg (wifi fix) wizardknight (kernel) and CM7 team for HTC Hero support.
Based on official HTC Hero CyanogenMOD 7.2 and some libs, files, kernel and modules from ACLs OMGB or from Xdandroid nand.
AGPS support is from this link: http://forum.ppcgeeks.com/android-tp2-development/149104-testing-rhod-agps-xtra-support.html
2.6.27 kernel
- native tethering is not working
3.3.6 kernel
- native tethering is not working
- autobacklight is not working
- reboot is not working
- bluetooth only working partial
- usb mass-storage is not working
3.4.41 kernel
- update cm7.2 to 2013.03.01 hero source
- update kernel to 3.4.41 from wizardknight
- reboot and autobacklight work
- bluetooth please test and report if something not work
For faster gps fix --> enable data or wifi connection and gps --> reboot or use Leo AGPS injector
gps.conf is setup for europe servers.
Download CM7.2:
2.6.27 kernel CM7.2.0-RC1-rhodium-20120424.zip
3.3.6 kernel CM7.2.0-RC1-rhodium-GSM-kernel-3.3.6-201200523.zip
CM7.2-rhodium-GSM-kernel-3.4.41-201300709.zip
Mirror 1 (MEGA)
How to install starting from Windows Mobile: (HSPL needed on your phone) based on: How to install nand wiki from ACL:
install Android-SDK on your Windows PC http://developer.android.com/sdk/index.html
copy files from platform-tools.zip to Android-SDK/platform-tools/
copy cwm_recovery_latest.img to Android-SDK/platform-tools/ (http://code.google.com/p/rhodium-nand/downloads/list)
copy RHODIMG.NBH = ACLs LK for Rhodium to the root of your sdcard (http://code.google.com/p/rhodium-nand/downloads/list)
copy CM7.2-xxxx.zip to the root of your sdcard
shut down your phone
connect the phone via USB to your PC
start your phone with Power plus Vol-
phone detect flash image now
flash image
reboot your phone (usb connected)
install HTC android driver (htc android driver.zip)
open windows shell (cmd)
browse to /android-sdk/platform-tools
Next steps are taken from ACLs install wiki:
In your CMD window type these commands:
Fastboot erase recovery
Fastboot erase boot
Fastboot erase misc
Fastboot erase system
Fastboot erase userdata
Fastboot erase cache
Load the cwm_recovery.img with fastboot:
In your CMD window type this command:
Fastboot flash recovery cwm_recovery_latest.img
Reboot: (Or hit the reset button)
In your CMD window type this command:
Fastboot reboot
Once LK is starting to load (Blue screen) press and hold the "POWER BUTTON" until you feel it vibrate(Top button). LK will let you know when it detected a press. Your recovery should load (If it not work unplug USB cable and reset your phone)
To Navigate in Recovery you can use the Vol UP/DOWN(Move UP/DOWN), END Call Key(Enter/Select) or the keyboard arrows with the enter key.
Select "apply update from sdcard".
Select "CM7.2-xxx.zip" and wait for it to finish installing.
Select "reboot system now"
First boot need ~ 5min
GAPPS:
- GAPPS http://goo.im/gapps/gapps-gb-20110828-signed.zip
Edit build.prop and set ro.telephony.network=4 to get CDMA running thanks argenisaz
Better performance settings
- settings/cyanogenmod --> settings/performance
Compcache = disabled
use JIT = disable
surface dithering = disabled
use 16bit transparency = enabled (system maybe unstable after this)
- settings/cyanogenmod --> settings/display
disable screen off animation
- settings/display
animations = no animations
- settings/ADW launcher --> Drawer settings
disable animated drawer
disable fade app labels
Changelog:
2013.07.09 update kernel and cm7.2 source, new kernel fixed a lot of problems
2012.05.23 new 3.3.6 kernel build for GSM, back to acl ramdisk, gsm data and apn fixed
2012.05.22 added CM7.2 build GSM with new detule 3.3.6 kernel CM7.2.0-RC1-rhodium-GSM-kernel-3.3.6-201200522.zip
2012.05.15 added CM7.2 build GSM and CDMA with new detule 3.3.4 kernel
2012.04.23 modded ramdisk for ACL kernel https://docs.google.com/file/d/0B3OovGFEtCdnSEhMdVZINVlhU2M
2012.04.20 updated build with ACLs new kernel
2012.04.16 added link to ACLs new kernel
2012.04.15 update base to CM-7.2.0 RC1 Hero GSM, zipalign on boot, fix for button backlight
2012.04.03 fixed keyboard backlight, zipalign all apps
2012.03.27 first release

4shared demands signing up
no problem
you can use "whatever you want!"@trash-mail.com
no activation needed.
works fine
to rom:
what is your rhod version?

As I know, if the boot.img was not match the file:/system/lib/modules/modules.sqf , wifi will never start properly.
I modified a Tiad8 version, encountered the same thing. I changed the boot.img and the modules.sqf together to solve this.
PS: I feel cm7 works on the rhodium very slow with poor battery life...

pcgg said:
As I know, if the boot.img was not match the file:/system/lib/modules/modules.sqf , wifi will never start properly.
I modified a Tiad8 version, encountered the same thing. I changed the boot.img and the modules.sqf together to solve this.
PS: I feel cm7 works on the rhodium very slow with poor battery life...
Click to expand...
Click to collapse
Boot.img and modules.sqf are from latested OMGB kernel update.
You should disable window andimations to increase speed.

I already close the animation, but still slow in settings...
I am downloading it then try to find it out.

Got the solution !!!
Only replace the file attached (View attachment lib.zip), then wifi will work properly!!
Good luck!
Forget to say that, this file should be under dir /system/lib/ , you may know ah.

pcgg said:
Got the solution !!!
Only replace the file attached (View attachment 968147), then wifi will work properly!!
Good luck!
Forget to say that, this file should be under dir /system/lib/ , you may know ah.
Click to expand...
Click to collapse
Thanks will try it. If it work i will upload a new update.zip

On my CDMA Rhodium...
So far, not good on a CDMA Rhodium. It goes into a reboot loop, where the phone will just reboot after it gets to the "(acl)" screen for a little bit.

xXHawkeyeXx said:
So far, not good on a CDMA Rhodium. It goes into a reboot loop, where the phone will just reboot after it gets to the "(acl)" screen for a little bit.
Click to expand...
Click to collapse
Logcat? Can you post it. Use QtADB. http://qtadb.wordpress.com/

walter79 said:
Logcat? Can you post it. Use QtADB. http://qtadb.wordpress.com/
Click to expand...
Click to collapse
lol, what's wrong with good ole adb? Sometimes...

arrrghhh said:
lol, what's wrong with good ole adb? Sometimes...
Click to expand...
Click to collapse
QTADB easy to use. You can use normal adb too.

Please, could someone provide more info about this ROM in comparison with ACL OMGB? In particular I'm interested in battery life, stability and speed. Stability and speed of the ACL OMGB is good, battery life is not. At this moment I am back to WinMo, so I'm interested in whether there is a technical positive, which I am convinced of the return to Android? Thanks in advance.

milda25 said:
Please, could someone provide more info about this ROM in comparison with ACL OMGB? In particular I'm interested in battery life, stability and speed. Stability and speed of the ACL OMGB is good, battery life is not. At this moment I am back to WinMo, so I'm interested in whether there is a technical positive, which I am convinced of the return to Android? Thanks in advance.
Click to expand...
Click to collapse
Kernel is almost certainly the same. I seriously doubt battery life is any better, why would it be? Again, same kernel...
Run it yourself - no one can tell you quantitatively how good it actually is... Everyone's battery life experiences are going to be different.

xXHawkeyeXx said:
So far, not good on a CDMA Rhodium. It goes into a reboot loop, where the phone will just reboot after it gets to the "(acl)" screen for a little bit.
Click to expand...
Click to collapse
There is a official HTC HERO CDMA CM7 version. Maybe we can use this as base.
You can find it here: http://www.cyanogenmod.com/devices
Sent me a PM and i will sent you a how to use the official rom as baserom.

walter79 said:
Logcat? Can you post it. Use QtADB. http://qtadb.wordpress.com/
Click to expand...
Click to collapse
Aw snap, when it wasn't working, I just decided to go back to OMGB. I'll have to dig up some time later to mess with this.
walter79 said:
There is a official HTC HERO CDMA CM7 version. Maybe we can use this as base.
You can find it here: http://www.cyanogenmod.com/devices
Sent me a PM and i will sent you a how to use the official rom as baserom.
Click to expand...
Click to collapse
Yeah, I noticed that. Ok, I guess you could send me the instructions. Thanks.

I installed this rom today. It works oke but there is no keyboard backlight?
Nice work

Logcat for CDMA...
Ok, I followed your instructions, and got the CDMA Version ready and installed. This one actually boots up.
I got to the lock screen, but the touch screen's calibration is completely messed up, and when I managed to get it unlocked, ADW Launcher just keeps failing to load, and various other errors are happening.
I attached a Logcat to this post.

xXHawkeyeXx said:
Ok, I followed your instructions, and got the CDMA Version ready and installed. This one actually boots up.
I got to the lock screen, but the touch screen's calibration is completely messed up, and when I managed to get it unlocked, ADW Launcher just keeps failing to load, and various other errors are happening.
I attached a Logcat to this post.
Click to expand...
Click to collapse
Code:
PackageManager( 781): Not granting permission android.permission.DEVICE_POWER to package com.android.deskclock (protectionLevel=2 flags=0x8be45)
gralloc ( 781): 752 KiB allocation failed in GPU memory, retrying...
replace: /system/lib/hw/gralloc.rhodium.so
maybe you have to rename it to gralloc.heroc.com

walter79 said:
Code:
PackageManager( 781): Not granting permission android.permission.DEVICE_POWER to package com.android.deskclock (protectionLevel=2 flags=0x8be45)
gralloc ( 781): 752 KiB allocation failed in GPU memory, retrying...
replace: /system/lib/hw/gralloc.rhodium.so
maybe you have to rename it to gralloc.heroc.com
Click to expand...
Click to collapse
Done, same as before. Attached Log.
And the file was never named "gralloc.rhodium.so" it was "gralloc.default.so" Before I renamed it.
EDIT: I decided to give your build 1 more try, just in case something somehow went wrong somewhere the first time. Big surprise! It's working this time. Booted into android, everything looking good so far, but uh.... No service, and com.android.phone keeps failing to work. I'm guessing the reason should be obvious.
CM7 2.zip contains the Logcat for your build.

Perfect! It works onmy rhod100. The only detail is the keyboard backlight. The ROM in general is slightly faster than OMGB and it has Cyanogenmod Settings! I missed them (I used to have CM7 in the Galaxy Ace). Thank you for this release!

[Nand ROM] Android iceBread blackstone

I found this Android Rom Nand not tested now i´m with htc one X ...
hope this works
Warning
This is just for Future Development
its or own risk .... can damage or device if not done correctly
Now developers can start Nand Blackstone Roms
Welcome to Blackstone NAND Progress
IceBread on NAND
Credit's :
- ACL : Boot and Recovery base, ril
- XDAndroid team : Build base & Lot of stuff
- Herrickwong: Kernel
- Arganis31: Nbh for Blackstone
- Tiad8: some help for Blackstone Nand first progress
Hi Friends!
First of all, I would like thank all great guys who is helped for our device nand fighting! Of course BIG thank to ACL.
I would like too calling all devs who are want help for HTC Blackstone Nand progress that we have faster without any fight. I think this phone its really old that we fighting for few issue but i think its really possible the real and good nand. I adding credits if i know who is create fix for nand.
I dont know everythings like kernel example but i fixing currently.
Im glad if everyone can help!
Thank you very much
This is my first our Blackstone Nand version. I take lot of time that we have more user friendly and funkcionality NAND build.
Pls keep your attention that this is Test build and need lot of work. Im working on it the kernel too but its slow because its not easy.
Main Install procedure:
* you need reading NAND tutorial that you understand correct / clear what you are doing!!!
0 - Flash latest HardSPL from OliNex
1 - Create one folder in pc and copy here : adb files & fastboot.exe, recovery may be boot.img from build.zip
2 - Install pdanet usb driver
3 - Format your sdcard to fat32 and after copy here: blac.nbh & build.zip
4 - Boot to tricolor screen and you need task 29 ( erase wm ) from BlackstoneRUUAdvanced
5 - Reboot again the tricolor mode and flash nbh from sdcard
6 - After done, reboot again and you look the fastboot screen ( Blue )
7 - Plug usb and run terminal from pc go to your folder ( adb fastboot etc ) and write this :
fastboot flash recovery recovery.img after this ok write this :
fastboot boot recovery.img
8 - your recovery running now, install this build if done after make reset or battery pull out.
9 - turn on your phone and wait for booted Android.
Another Install guide with more info, maybe its better for you:
Thanks to FazZ! Great work!
Flash the latest HardSPL from OliNex
Extract the 'adb files & fastboot.exe' files to a folder
Format the microSD card fully as FAT32
Copy the 'BlacIMG.NBH' file and your selected ROM (zip) you wish to use to the root of the microSD
Boot in TriColour mode (Power button and Volume down button)
Whilst in the TriColour mode, connect the Blackstone to a USB port ('Serial' should now say 'USB')
Run 'BlackstoneRUUAdvanced' and select the 'Task 29' which is full wipe of the Blackstone
Once completed, insert the microSD card and reboot into the TriColour mode again
The Blackstone will auto-flash-install (after key confirmation) the 'BlacIMG.NBH' on the microSD card
The 'BlacIMG.NBH' must NOT be flashed via Windows using the RUU tool (it will only fail)
Once flashed with the 'BlacIMG.NBH' it will reboot to a new Fastboot screen (blue background)
After a short time the Blackstone in Fastboot mode with enter a USB connect ready state
Now connect the Blackstone to your Windows OS and open a CLi/Command prompt
Within CLi go to the directory where you place the 'adb files & fastboot.exe' files (from step 2)
Type: fastboot flash recovery recovery.img (this will flash install the custom CWR)
Then type: fastboot boot recovery.img (this will reboot your Blackstone into CWR)
In CWR use the Volume keys to move up and down, and the Power button to select
Scroll through list to enable the 'Back key' option (touch screen and capacitive buttons do not work yet)
You are now finally ready to install your chosen ROM that is on your microSD
Once installed, let it reboot into Android OS which takes about 5 minutes on the first run
Once the Blackstone has settled within the OS (you can see the typical Android home screen), reboot
This time round, it should only take about a minute to start and you can now start using you NAND ROM
AUDIO - You need one trick, if you have booted rom after plug headset and play music from musicplayer, after unplug and continue play and after you unlock system audio kernel problem
* If recovery flash done after every reboot like this step:
- Power key pressing in fastboot screen : booting to recovery.
- If not pressing power key after simply booting android.
- If plugged Ac / Pc Usb power after you have fastboot mode.
Big Thanks to all my donators: (included SD/NAND too )
-uberto.costanzo
-wanpaopao
-Drifft Art
-Osiris
-Roland
-Philippe
- Etoxus
Working :
Signal
Phone ( in / out )
Sms ( in / out )
Audio
Sdcard mounting
App install and run
Root with Superuser
All stock app
Mp3 found
GPS
Camera! - video not tested so far ( for photo my best app camera360 ultimate )
Headset
Lcd brightness
Touch Screen
Hardware keys
Keyboard
Bootanimation
3D
Games - Buggy so far
G-sensor
Not working :
Wifi
3G-2G data connection
BT
/ You look the best speed and ram ( deodexed = 128 Mb odexed ~ 140MB with clear boot ) on blackstone if im done my kernel. better speed & ram than all sd build. Patience! /
Blackstone NAND progress Downloads place + all neccessary files!
CHANGE LOG
Coming soon
IceBread V0.3
- System libs are updated for better speed stability.
- Better boot.img configuration
- Data connection progress, hope its done in this weekend but i dont guarantee!! its very close.
2012.04.17
IceBread V0.2
- New boot.img
Added to 3D fix, and sensor fix and other small change
- Right Sensor neccessary files for Blackstone GB nand.
Ready just boot.img-2012.04.15 if you need only this.
2012.04.07
First release
DOWNLOADS
REMOVED
REMOVED/

Let me get this right - you don't own the device? You're pushing something you can't test, that can potentially break someone's device?

jerdog said:
Let me get this right - you don't own the device? You're pushing something you can't test, that can potentially break someone's device?
Click to expand...
Click to collapse
changed first post
i will try it later i´m not expert with this .... Nand Android
This is just for Future Development
I have HTC HD but not tested this rom ... hope this works
i will test it later
now im with One X
its or own risk .... can damage or device if not done correctily
its just to help future developers
thanks

masrterk said:
I have HTC HD but not tested this rom ... hope this works
i will test it later
Click to expand...
Click to collapse
*shudders*
Frightening, honestly. Why would you post something that's clearly not yours? You didn't even write the words in the first post, let alone help with any of the actual development.

whats the problem?
this could help in future development
Finaly a Nand version for Blackstone and a Nand rom
they did something that works better then this SD psedo rom
Hope this help
Now with NAND annd this ROM development is possible ?

arrrghhh said:
*shudders*
Frightening, honestly. Why would you post something that's clearly not yours? You didn't even write the words in the first post, let alone help with any of the actual development.
Click to expand...
Click to collapse
i understand this is from tiad8, which is banned from xda, but anyways is work might be accepted! Please be careful be4 posting anything like this, this shouldn't stay here long time if it has warez...
anyways you need to test it first then you can share it! The instructions are actually clear, but if you post it, you try it first!

But now theres a nand Rom for htc HD
with sd android is impossible and very buggy to use
now they make some progress

masrterk said:
But now theres a nand Rom for htc HD
with sd android is impossible and very buggy to use
now they make some progress
Click to expand...
Click to collapse
You haven't even tested it... lol.
I don't see why SD Android is "impossible" and "very buggy" - when this is even buggier...!
Oh well.

Closing this thread as it is not the work of the OP and could be considered malicious to the device.