Boot Looping Problems - Samsung Galaxy Nexus

First of all, I know I am in the general section when I should be posting in the thread of the current rom I am running. But the forum will not let me, it says I have an insufficient post count to post in a development section which is where thread is located. (I think this is a pretty stupid rule, especially when a person like me who lurks these forums and uses it to find roms to use, and when that lurker needs to find help they cannot post in the appropriate section ; end rant).
Anyway, onto the boot loop problem. My current phone setup is : ParanoidAndroid 1.9.7 for the ROM and Trinity kerenl with 1344Ghz cpu clock and 304Ghz gpu clock.
What is happening is a boot loop at the Google screen. The first time this happened, my on screen navigation keys disappeared and when I tried to reboot my phone it boot looped. To fix it i had to do a clean install (I still have access to recovery when this happens). That was about 4 or 5 days ago, and I was fine up until now. This time the navigation keys didn't disappear, it was just a normal reboot that I did because when i plugged my phone in for the night it didn't display that it was charging, this is a normal thing for me and all it takes is a reboot and it will display charging status. Except this time when I went to reboot it, it boot looped at the Google screen again. I heard that a dirty flash of the rom may help, but I am not sure about this, and I don't want to screw my phone up anymore than it is, other than that I am pretty stuck as far what to do to fix the problem goes.
If more information is needed or if my explanation is unclear just post.
Any help is appreciated. Thanks in advance.

crashngo said:
First of all, I know I am in the general section when I should be posting in the thread of the current rom I am running. But the forum will not let me, it says I have an insufficient post count to post in a development section which is where thread is located. (I think this is a pretty stupid rule, especially when a person like me who lurks these forums and uses it to find roms to use, and when that lurker needs to find help they cannot post in the appropriate section ; end rant).
Anyway, onto the boot loop problem. My current phone setup is : ParanoidAndroid 1.9.7 for the ROM and Trinity kerenl with 1344Ghz cpu clock and 304Ghz gpu clock.
What is happening is a boot loop at the Google screen. The first time this happened, my on screen navigation keys disappeared and when I tried to reboot my phone it boot looped. To fix it i had to do a clean install (I still have access to recovery when this happens). That was about 4 or 5 days ago, and I was fine up until now. This time the navigation keys didn't disappear, it was just a normal reboot that I did because when i plugged my phone in for the night it didn't display that it was charging, this is a normal thing for me and all it takes is a reboot and it will display charging status. Except this time when I went to reboot it, it boot looped at the Google screen again. I heard that a dirty flash of the rom may help, but I am not sure about this, and I don't want to screw my phone up anymore than it is, other than that I am pretty stuck as far what to do to fix the problem goes.
If more information is needed or if my explanation is unclear just post.
Any help is appreciated. Thanks in advance.
Click to expand...
Click to collapse
Why don't you try with 1.99 version? Also theres a fix for 1.9.7 did you installed it?
EDIT:
Also what GN are you using GSM?

Rotary Heart said:
Why don't you try with 1.99 version? Also theres a fix for 1.9.7 did you installed it?
EDIT:
Also what GN are you using GSM?
Click to expand...
Click to collapse
I was actually downloading 1.99 as I was typing that, and I was not aware of a fix for 1.97. What was the fix exactly? If it was for a boot loop problem I will feel like a total moron and sorry for wasting everyone's time.
Its CDMA.

crashngo said:
I was actually downloading 1.99 as I was typing that, and I was not aware of a fix for 1.97. What was the fix exactly? If it was for a boot loop problem I will feel like a total moron and sorry for wasting everyone's time.
Its CDMA.
Click to expand...
Click to collapse
Well I have GSM so I don't know if they are keeping it up the same but try the 1.99 with wipe and everything, report back when you are done. I don't remember what the fix do, but there is one.

Rotary Heart said:
Well I have GSM so I don't know if they are keeping it up the same but try the 1.99 with wipe and everything, report back when you are done. I don't remember what the fix do, but there is one.
Click to expand...
Click to collapse
There is a 1.99 for CDMA so I am going to flash that.

Rotary Heart said:
Well I have GSM so I don't know if they are keeping it up the same but try the 1.99 with wipe and everything, report back when you are done. I don't remember what the fix do, but there is one.
Click to expand...
Click to collapse
Well I flashed 1.99, only time will tell how it does.
Also I noticed your screen name, do you drive a rx-7 or rx-8?

crashngo said:
Well I flashed 1.99, only time will tell how it does.
Also I noticed your screen name, do you drive a rx-7 or rx-8?
Click to expand...
Click to collapse
I have had 5 RX-7 and I'm only 21... and more to come

Rotary Heart said:
I have had 5 RX-7 and I'm only 21... and more to come
Click to expand...
Click to collapse
Holy crap....lol
Im looking into getting a gen 1 RX- 8 just alittle worried about the renesis motors.

crashngo said:
Holy crap....lol
Im looking into getting a gen 1 RX- 8 just alittle worried about the renesis motors.
Click to expand...
Click to collapse
Worried why?

Rotary Heart said:
Worried why?
Click to expand...
Click to collapse
I've heard they can be very finicky and if not taken care of properly they'll have problems.

crashngo said:
I've heard they can be very finicky and if not taken care of properly they'll have problems.
Click to expand...
Click to collapse
Well same with any other engine, they need some care, but if you do it right (its not hard at all) you can have a sexy Daily Driver for a lot of years :highfive:

Rotary Heart said:
Well same with any other engine, they need some care, but if you do it right (its not hard at all) you can have a sexy Daily Driver for a lot of years :highfive:
Click to expand...
Click to collapse
Very true, and thats what I am hoping for.

crashngo said:
Very true, and thats what I am hoping for.
Click to expand...
Click to collapse
Remember to report back if you have any issue. Also you should try to post in the developers section of Paranoid Android now that you can
Good Luck with both the car and the phone :good:

Rotary Heart said:
Remember to report back if you have any issue. Also you should try to post in the developers section of Paranoid Android now that you can
Good Luck with both the car and the phone :good:
Click to expand...
Click to collapse
Will do, and thanks.

Any chance you found a resolution. I can't get mine to work either.

captnawesem said:
Any chance you found a resolution. I can't get mine to work either.
Click to expand...
Click to collapse
What version and kernel are you using?

Related

[ROM] Jelly Bean Gnex Port Alpha [6/30/12][v0] Discontinued

ANDROID MAISTER'S
PRESENTS
Jelly Bean Gnex Port
The Andromadus Team is working on Jb from source, best posible way to expirience jellybean as it should be, follow there progress/releases here
​
Here it is guys jb for our beloved g2, this rom is based on the gnex jellybean leak that we saw couple days ago, right now rom is as useless as the word could posibly describe it, the rom boots just fine, but it seems the launcher does not like being render in software mode so it crashes non stop, i tried other launcher they dotn seem to work ether, im just posting this so maybe someone else can help me, to ether get launcher working in software mode or getting egl acceleration working, for this will we mostlikely need a 3.0 kernel.
Again bare in mind this is pretty much useless, and its not much fun to use, untill we solv the launcher issue, dont expect this to be a daily driver any time soon
Working:
Touchscreen forgot to mention this
It renders and reaches lockscreen thats about it, im sure i can fix more, but theres no point if we cant get the launcher working.
Not working
mostly evrything
Screenshots
Download Link
http://www.androidfilehost.com/main/Rezound_Developers/siulmagic/Vision_ROMS/
Click to expand...
Click to collapse
siulmagic said:
ANDROID MAISTER'S
PRESENTS
Jelly Bean Gnex Port
​
Here it is guys jb for our beloved g2, this rom is based on the gnex jellybean leak that we saw couple days ago, right now rom is as useless as the word could posibly describe it, the rom boots just fine, but it seems the launcher does not like being render in software mode so it crashes non stop, i tried other launcher they dotn seem to work ether, im just posting this so maybe someone else can help me, to ether get launcher working in software mode or getting egl acceleration working, for this will we mostlikely need a 3.0 kernel.
Again bare in mind this is pretty much useless, and its not much fun to use, untill we solv the launcher issue, dont expect this to be a daily driver any time soon
Working:
It renders and reaches lockscreen thats about it, im sur ei can fix more, but theres no point if we cant get the launcher working.
Not working
mostly evrything
Screenshots
Download Link
Click to expand...
Click to collapse
maybe replace launcher with a different launcher dude?:good: cool port by the way
The Android Manual said:
maybe replace launcher with a different launcher dude?:good: cool port by the way
Click to expand...
Click to collapse
read description i did, it does not work, im guessing its jb was not meant to be used in software mode, thats why the launcher crashes.
I want to say that aside from the fact that it's on the DZ (which is a phone I own and use), the best thing about this thread are the advertisements on the bottom of the uploadhouse.com website.
:highfive:
Careless_ said:
I want to say that aside from the fact that it's on the DZ (which is a phone I own and use), the best thing about this thread are the advertisements on the bottom of the uploadhouse.com website.
:highfive:
Click to expand...
Click to collapse
That's not nice of you at all....
The thread proves that, unlike what a lot of people who knows little to nothing about programming say, JB can be ported to the G2 and it can boot.
First thing first. Stuffs come later.
@siulmagic: awesome at least it boots!
@siulmagic dont sell yourself short! It takes a lot to get something like this to boot! I am sure after a while someone will get something else to work. Like taz , he is a great porter!
lol i did not see those ads on the website, will upload somewere else, my bad haha.
I knew it was only a matter of time, n they said this wasn't possible? Sure there's issues and bugs but its still in the alpha stage.
siulmagic said:
read description i did, it does not work, im guessing its jb was not meant to be used in software mode, thats why the launcher crashes.
Click to expand...
Click to collapse
oh, ok dude we'll think of some fix :highfive:
Does touchscreen work?
Sent from my HTC Vision using XDA
xT4Z1N4TRx said:
Does touchscreen work?
Sent from my HTC Vision using XDA
Click to expand...
Click to collapse
yes. I just used it and was able to turn the phone on/off, pull the notification bar down, turn off/on the screen, and get to the recent apps screen. That is just about it. I didnt get any type of signal or data. and wasnt able to get to the settings from the statusbar.
Amazing !! Thanks !!
I download now !
I just test this rom and it crashed all the time but it is normal because is in alpha,but there are yet the three bottom under the screen ^^
I'm very impatient for the next release !!
Noob question of mine )
Hey what is software mode?
---------- Post added at 09:01 PM ---------- Previous post was at 08:59 PM ----------
jspina said:
yes. I just used it and was able to turn the phone on/off, pull the notification bar down, turn off/on the screen, and get to the recent apps screen. That is just about it. I didnt get any type of signal or data. and wasnt able to get to the settings from the statusbar.[/Q
what does it look like?
Click to expand...
Click to collapse
Also, is everything perfectly sized?
ALSOALSO what kernel is being used?
Wich launchers did you try?
Sent from the Going Merry
KyraOfFire said:
That's not nice of you at all....
Click to expand...
Click to collapse
I said "ASIDE FROM THE FACT". you misinterpreted.
I would have thought JB would have taken another year for anything to be on Desire Z.
I'm just learning these past 3 years and by no means unfamiliar with personal ports from other devices but took a look at doing something similar for my device for personal use and was humbled very quickly. It's the accomplishing of seemingly impossible tasks large well funded corporations don't bother tackling by one user who solves it on their free time that make me truly love open technology. Kudos. Keep it Up. Many Thanks!
xT4Z1N4TRx said:
Also, is everything perfectly sized?
ALSOALSO what kernel is being used?
Click to expand...
Click to collapse
yes this is aosp based, so it support's all res/dpi.
jspina said:
yes. I just used it and was able to turn the phone on/off, pull the notification bar down, turn off/on the screen, and get to the recent apps screen. That is just about it. I didnt get any type of signal or data. and wasnt able to get to the settings from the statusbar.
Click to expand...
Click to collapse
i can very easily get ril working but there's really no point, if theres no working launcher =P.

GPS Signal Broken -- Fix Found

Hello all,
Long time lurker, just wanted to share an issue I had.
I've flashed nearly every ROM that is out there since I got my SGS3 and have never had any GPS issues, however this weekend I used it without a problem but Tuesday all of a sudden turning it on and off still produced nothing...not even the increased battery drain from having GPS on.
Here's what I did in hopes that it can help someone or at least give some knowledge as there wasn't a lot out there when I searched:
1.) Restored a previous Nandroid that I knew had a working GPS --- Result = FAIL
2.) Searched XDA and Google...found a video with some USSD codes for the dialer, etc.. ---- Result = FAIL
3.) Pulled battery and sim card, etc... --- Result = FAIL
4.) Flashed Wicked as I know that is a stable and highly used ROM. Everything great but still no GPS. ---- Result = FAIL
5.) Found a suggestion about clearing cache in google framework, Maps and uninstalling Maps updates. Result = FAIL
**however Play Store wouldn't let me update Maps when I rebooted as it said it wasn't compatible with my phone. No clue why.
6.) Finally I decided to do Triangle Away and Chainfires unrooting procedure to get back to unrooted stock. ---Result = SUCCESS!
Not sure what about it made GPS come back, however the next step will of course be to root again and see if there are any issues.
Hope this helps someone who ends up in my situation. Feel free to PM if you need more details.
Thanks to all
Edit: Just as an FYI -- when I rooted again, GPS was still back and I've had no issues since.
Thanks man, I like threads like these because you never know when you may need them. Same issue for me. On CM10 ROMs,I have trouble locking onto GPS, and the fix for me has been downloading GPS test and running that before using something like navigation.it's a minor inconvenience but it works great
Overall, if you have something borked, no matter what rom you use... no matter how many times you wipe... odin back to stock, should fix it always.
mt3g said:
Overall, if you have something borked, no matter what rom you use... no matter how many times you wipe... odin back to stock, should fix it always.
Click to expand...
Click to collapse
True, but honestly, that doesn't always work. I have a second SGS3 Pebble Blue 32GB, and it won't play nice with Lean Kernel/Ktoonz, unless it's the touchwiz based kernels, whereas my white 16GB runs all of them flawlessly. They were rooted and booted the same way, and they both have the same GPS issue.
Out of curiosity, what's the chainfire way of going back to stock?
Also, do we have any guides here/on youtube that detail how to odin back to stock. I'm gonna give it a go on the blue one again/cross my fingers hoping I made a mistake, hence why I want a guide lol! *Searches*
thanks for the info jpk17!
saved us a lot of time here for whoever has that issue in the future.
can you provide the link to Chainfire's unroot procedure?
thanks!
Good to know but youcould have got straight to the point rather than writting five pages of useless stuff then saying something that to be honest is not any special invention anyways.
lazarat said:
Good to know but youcould have got straight to the point rather than writting five pages of useless stuff then saying something that to be honest is not any special invention anyways.
Click to expand...
Click to collapse
Kind of a **** huh? He was just explaining what he did. Geeze.
Sent from my SGS3 Stock Rooted & Odexed
I love this thing!
The only time my gps was ever messed up was when i used a sprint leak JB rom and had the gps turned off. Flashed a couple roms after no gps whatsoever. Odin'ed with 2 or 3 different versions and still couldnt get the gps back.
Finally I flashed another JB rom based on the sprint leak and turned GPS back on and everything started working again. Lesson learned on using sprint leaks lol.
Had op's problem myself before, and full wiping and Odin'ing back to stock actually didn't work.. what did work though was after full unroot, doing tmo ota update.
Who knows, this info could help someone out as well..
Sent from my SGH-T999 using xda app-developers app
Unroot Procedure Used
HG! said:
thanks for the info jpk17!
saved us a lot of time here for whoever has that issue in the future.
can you provide the link to Chainfire's unroot procedure?
thanks!
Click to expand...
Click to collapse
Here is the procedure I followed to unroot...followed step by step and couldn't have been easier to follow:
I can't post links as I don't have over 10 posts yet, but should be able to figure it out from this:
www . androidrootz . com
Copy the next line after the .com and you'll get to the page.
/2012/10/how-to-unroot-samsung-galaxy-s3-at.html
Mr. Pot ...meet Mr. Kettle
lazarat said:
Good to know but youcould have got straight to the point rather than writting five pages of useless stuff then saying something that to be honest is not any special invention anyways.
Click to expand...
Click to collapse
My sincere apologies that my 15 line post was too much to handle.
I'd also like to thank you for such a nice response to a first time poster that was clearly just trying to help the community for an issue that is rare and relatively undocumented based on my searches.
I shall go back to normal... lurking and wading through useless posts like yours to find those with relevance...
jpk17 said:
My sincere apologies that my 15 line post was too much to handle.
I'd also like to thank you for such a nice response to a first time poster that was clearly just trying to help the community for an issue that is rare and relatively undocumented based on my searches.
I shall go back to normal... lurking and wading through useless posts like yours to find those with relevance...
Click to expand...
Click to collapse
Just dont get some people....thanks for the steps. But im traveling away from home and only have my MAC and it cant get Bootcamp to work on this one, so my question is, how do i unroot on a mac.
Thanks i advance guys....
jpk17 said:
My sincere apologies that my 15 line post was too much to handle.
I'd also like to thank you for such a nice response to a first time poster that was clearly just trying to help the community for an issue that is rare and relatively undocumented based on my searches.
I shall go back to normal... lurking and wading through useless posts like yours to find those with relevance...
Click to expand...
Click to collapse
Dont let this guy discourage you. He's generally an arse to everyone. When i see a pointless **** post from him like you received, just keep reading through Thanks for the thread!
jpk17 said:
My sincere apologies that my 15 line post was too much to handle.
I'd also like to thank you for such a nice response to a first time poster that was clearly just trying to help the community for an issue that is rare and relatively undocumented based on my searches.
I shall go back to normal... lurking and wading through useless posts like yours to find those with relevance...
Click to expand...
Click to collapse
Hey man props for the post it'll probably help someone out, assuming they are respectful enough to search and try things before posting. Which I also want to commend you on. Most like to post frantically wanting help before bothering to search or try anything. So gj man
Sent from my SGH-T999 using xda app-developers app
Confirmed working
This fixed my GPS too. Triangle away and then flash stock NON ROOTED firmware and GPS will come back...NOW hopefully this fixes my weird battery life too. About to root again and shoot right back to PA android and see if it works there. Wish me luck
Edit. Yup it works. Went straight to pa android
osmosizzz said:
This fixed my GPS too. Triangle away and then flash stock NON ROOTED firmware and GPS will come back...NOW hopefully this fixes my weird battery life too. About to root again and shoot right back to PA android and see if it works there. Wish me luck
Edit. Yup it works. Went straight to pa android
Click to expand...
Click to collapse
Ok so i finally unrooted using above steps. Still no gps. Tried GPS Toolbox, GPS Test and the google navigation. Nothing.
What Im seeing is that the little Icon in the upper status bar never shows. Like ether it doesnt even see a SAT, or the receiver in my phone isnt even turning on.
If i cant figure out, i guess ill go back to Tmo....
Thanks for the help.
What I did was go to a stock ics based Rom then triangle away and then I followed the site that op posted. The download was ridiculously slow. Took like an hour for 690mb. That should do the trick. Do it in that order
Sent from my Rooted Gameboy
osmosizzz said:
What I did was go to a stock ics based Rom then triangle away and then I followed the site that op posted. The download was ridiculously slow. Took like an hour for 690mb. That should do the trick. Do it in that order
Sent from my Rooted Gameboy
Click to expand...
Click to collapse
HAHA funny, i actually did it EXACTLY like that. I tried a stock ICS ROM from wildchild and nothing. Then Triangle away, ODIN flash to stock with un root and factory reset and nothing.
If i wasnt getting lock, that would be different. But im not getting the little Icon in top left corner.
I have a friend with a Stock Sprint phone and his works in same room.
Thanks
Sucks cordell... Sorry you're not getting it working.
Only thought I had if I followed you correctly is you said you went to a wildchild stock. Maybe you need to go back to the older stock from the link that worked for osmosis and I?
Sent from my SGH-T999 using xda premium
jpk17 said:
Sucks cordell... Sorry you're not getting it working.
Only thought I had if I followed you correctly is you said you went to a wildchild stock. Maybe you need to go back to the older stock from the link that worked for osmosis and I?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I went to wild child stock just before i unrooted and went to Stock Tmo form the guide above. I didnt think that would have made a difference.
Im not gonna root and go to store, so ill go to store and see what they say.
The reason i went to the wildchild stock based ICS rom was hope that I wouldnt have to unroot....
Thanks.
EDIT>>> Just did the OTA from Tmo and back .. Yes GPS back,
Thanks minigame

[ROM][2.2.1][Sense]AnthraX - "Resistance is futile, you will be intoxicated"[BETA]

[ROM][2.2.1][Sense]AnthraX - "Resistance is futile, you will be intoxicated"[BETA]
AnthraX - "Resistance is futile, you will be intoxicated"
Ported from:
Using Flykernel 13
Ported from HTC Hero CDMA froyo ROM by zenulator = http://forum.xda-developers.com/showthread.php?t=834840
Problems:
GPS
Camera, open and see, it takes awsome pictures, artistic...
Notification LED and buttons backlight aren't working
Power menu shut down wont actually shut down the phone (LOL)
It'd be cool to have a reboot to recovery, fastboot menu..
Report if you notice any more bugs
If there are any devs that know how and are willing to fix some of these bugs, be my guest, if you manage to fix them post a patch and I'll incorporate them into the ROM
How to install:
---Download the rom and put it on your SD card
---Reboot to clockworkmod
---Wipe data, wipe cache
---Go to advanced tab/Wipe dalvik cache
---Flash the ROM
---Reboot and say hello to your new ROM
Tips:
Get Antutu CPU Master from market and overclock as much as you can, like always, change governor to smartassV2..
Get Spare Parts from market, open Spare parts, window animations and transition animations, set both to very slow, it will give you an animation that is slow till the app you wanted loads, nice trick for your brain
Credits:
---zenulator (His awsome CDMA ROM)
---1ceb0x (Helped me with speeding this up)
---Me
Download links:
http://goo.im/devs/Enverbalalic/AnthraX-FroYoHero-kemoba.zip
Screenshots:
None so far
Project update, started working on a new version, i wont release till im 100% sure everything is working, maby some of you will get a PM with a pre-release version just to help me test, currently working on the camera, i have no idea what is wrong
Downloading right now thanks for this bro, i cant wait to try this
Can't wait to dust off my Hero and try this. It's been so long since I flashed something
Sent from my HTC One X using xda app-developers app
http://forum.xda-developers.com/showpost.php?p=34154779&postcount=829
Aha! I was right !
Are GPS and camera gonna be fixed in next release(s)? Or no hope to get that working?
No problem with bluetooth?
Camera and GPS are fixed in herolatte: http://forum.xda-developers.com/showthread.php?t=1026699
maybe this could help you or just ask erasmux if he is still here
Bluetooth is ok, im aware of herolatte, im going to try to use some stuff from it, hopefully we'll get a 100% functioning ROM in a next couple of days, if some of you can test this and report if there are any bugs please
"Doing some boring stuff"... ^^
I'm about to try.
2 more issues :
- Notification LED and buttons backlight aren't working
- mobile Data gets on by itself
Your ROM is very fast. Good work, dude. Keep on doing great job.
pirlouit2 said:
2 more issues :
- Notification LED and buttons backlight aren't working
- mobile Data gets on by itself
Your ROM is very fast. Good work, dude. Keep on doing great job.
Click to expand...
Click to collapse
Thanks, you would like data to be off by default ???
kemoba said:
Thanks, you would like data to be off by default ???
Click to expand...
Click to collapse
No, problem is that if you put it off, it gets on randomly by itself...
Great work on getting this up on the forums, kemoba!
Guys, give you the full support for this because he needs it, he's prolly the last developer for Hero (until I come back ).
1ceb0x said:
Great work on getting this up on the forums, kemoba!
Guys, give you the full support for this because he needs it, he's prolly the last developer for Hero (until I come back ).
Click to expand...
Click to collapse
Thanks man, this could be my last ROM for Hero so i'll try to make it awsome
I would really like to use or at least test this ROM but I really use both GPS and camera so
I hope that gets cleared so I can use it :good:
I took it for a spin, but when I push the button to lock the screen, the phone freezes. I left it for 10 min, but there was no change. Also i left the screen to turn black by itself but the phone became unresponsive after that. Is anybody experiencing anything like this?
f1r3fl3x said:
I took it for a spin, but when I push the button to lock the screen, the phone freezes. I left it for 10 min, but there was no change. Also i left the screen to turn black by itself but the phone became unresponsive after that. Is anybody experiencing anything like this?
Click to expand...
Click to collapse
The clock is probably too high for you, i'll set it lower in the next version, sorry about that...
kemoba said:
The clock is probably too high for you, i'll set it lower in the next version, sorry about that...
Click to expand...
Click to collapse
Thanks!
AFAIK my Hero can run at 691 mHz max frequency.
f1r3fl3x said:
Thanks!
AFAIK my Hero can run at 691 mHz max frequency.
Click to expand...
Click to collapse
I think it's 633, or 572, what recovery are you using, did you do a full wipe, did you flash any different kernels or anything ?
kemoba said:
I think it's 633, or 572, what recovery are you using, did you do a full wipe, did you flash any different kernels or anything ?
Click to expand...
Click to collapse
I'm using the latest Amon Ra recovery (I think it was 1.7 or sth). I wiped everything, and i flashed just the rom, nothing else. I flashed it twice, first i thought it was a bad download or sth, but the checksums were correct.
Also I needed to sign it, because at first the rom failed the check. I used Auto-Sign_v0.65 Maybe this can cause an issue?

[Q] LuneOS Dualboot on Gnex?

In light of the newly-minted LuneOS alpha release, I was wondering if anyone had experience dualbooting webOS on their Galaxy Nexus? I know it's possible to do so with Android-based ROMs, but I want to keep my CM nightlies as a fall-back, especially since the LuneOS is in such an early stage and technically does not officially support the device (they're looking for community support *hinthint devs*). If you do, please drop a note with your experience in this area! Thanks in advance. :good:
drfandroid said:
In light of the newly-minted LuneOS alpha release, I was wondering if anyone had experience dualbooting webOS on their Galaxy Nexus? I know it's possible to do so with Android-based ROMs, but I want to keep my CM nightlies as a fall-back, especially since the LuneOS is in such an early stage and technically does not officially support the device (they're looking for community support *hinthint devs*). If you do, please drop a note with your experience in this area! Thanks in advance. :good:
Click to expand...
Click to collapse
Well,it would be cool,even with sailfish os,that i really love
Anyway for everybody who wants to try webos (LunaOs) http://webos-ports.org/wiki/Maguro_Info
I just saw the news on Engadget and came here to see if anyone was talking about this. I'm going to try this out since my GNex is mainly just sitting in a box now. I miss webOS.
The only thing I wonder about is that I have a Verizon GNex. If I don't use it for calls or anything, does it matter if I flash the Maguro version? I remember I was in the same boat with the Ubuntu phone port but I think I waited for the Toro port. I can't remember.
jsgraphicart said:
I just saw the news on Engadget and came here to see if anyone was talking about this. I'm going to try this out since my GNex is mainly just sitting in a box now. I miss webOS.
The only thing I wonder about is that I have a Verizon GNex. If I don't use it for calls or anything, does it matter if I flash the Maguro version? I remember I was in the same boat with the Ubuntu phone port but I think I waited for the Toro port. I can't remember.
Click to expand...
Click to collapse
Wondering this as well.
they had, and still have the best multitasking on a mobile device i've ever used. it was just so fluid and intuitive. some of their features they incorporated are still ahead of their time today
x000x said:
they had, and still have the best multitasking on a mobile device i've ever used. it was just so fluid and intuitive. some of their features they incorporated are still ahead of their time today
Click to expand...
Click to collapse
Agreed. Has there been any other phone that uses a gesture area like they did? I loved that.
jsgraphicart said:
Agreed. Has there been any other phone that uses a gesture area like they did? I loved that.
Click to expand...
Click to collapse
I looked for a long time, but nothing recent. there was one thing kind of similar, a few years back called 'itching thumb' http://www.xda-developers.com/android/use-itching-thumb-to-multitask-in-android/ but was discontinued long ago.
Yeah, well I just checked the comments on their official release post, and after some helpful replies I can (sadly) announce that there is no dual-boot support. Also, the latest build they have is a couple weeks old, since they no longer have a maintainer for the device The post is here, if any of you want to skim it . So at this point it's either flash a build that's dated, without a fall-back that would come with dual-booting, or wait and see
drfandroid said:
Yeah, well I just checked the comments on their official release post, and after some helpful replies I can (sadly) announce that there is no dual-boot support. Also, the latest build they have is a couple weeks old, since they no longer have a maintainer for the device The post is here, if any of you want to skim it . So at this point it's either flash a build that's dated, without a fall-back that would come with dual-booting, or wait and see
Click to expand...
Click to collapse
There's a Sept. 1st build there. More towards the Center.
http://build.webos-ports.org/luneos-testing/images/maguro/
There's a Sept. 1st build there. More towards the Center.
Click to expand...
Click to collapse
Yes, I just noticed haha my bad. I was just paraphrasing a comment off of the post I linked to. Shame there's only dual-booting available on the Touchpad (for now at least). I'll probably wait until the next stable release or so before diving in.
jsgraphicart said:
I just saw the news on Engadget and came here to see if anyone was talking about this. I'm going to try this out since my GNex is mainly just sitting in a box now. I miss webOS.
The only thing I wonder about is that I have a Verizon GNex. If I don't use it for calls or anything, does it matter if I flash the Maguro version? I remember I was in the same boat with the Ubuntu phone port but I think I waited for the Toro port. I can't remember.
Click to expand...
Click to collapse
im flashing it on a toroplus right now, gonna let you guys know how it goes when it finishes. on a related note, make sure to wipe /system before you flash, because the updater script doesnt do that. i had cm11 installed on there before and forgot to do it, so im reflashing clean now.
also, it looks like at least some of the android file system is retained, so that means we may be able to get data working by pulling libs from a 4.2.2 rom. dont quote me on that, ill try it and see what happens when i get this thing to boot. I pulled apart the boot.img and nothing seems to be stopping us there either from what I can tell.
edit: as much as i wish this worked, dont waste time flashing it if your not a maguro device. doesnt boot on toroplus, prolly wont boot on toro either.
whoshotjr2006 said:
im flashing it on a toroplus right now, gonna let you guys know how it goes when it finishes. on a related note, make sure to wipe /system before you flash, because the updater script doesnt do that. i had cm11 installed on there before and forgot to do it, so im reflashing clean now.
also, it looks like at least some of the android file system is retained, so that means we may be able to get data working by pulling libs from a 4.2.2 rom. dont quote me on that, ill try it and see what happens when i get this thing to boot. I pulled apart the boot.img and nothing seems to be stopping us there either from what I can tell.
edit: as much as i wish this worked, dont waste time flashing it if your not a maguro device. doesnt boot on toroplus, prolly wont boot on toro either.
Click to expand...
Click to collapse
That's too bad. What are you getting when it tries to boot? Have you let it sit for a while before coming to that conclusion? Maybe it doesn't have any sort of booting indication.
Update: I ended up going for it, and flashed the stable build onto my maguro. Worked, but none of the apps would open again after I had closed them for some reason (If I wanted to open Preware 2 again, I had to reboot the device...). The dev build wouldn't boot at all after flashing, so I'm running on the August 10th stable build.
jsgraphicart said:
That's too bad. What are you getting when it tries to boot? Have you let it sit for a while before coming to that conclusion? Maybe it doesn't have any sort of booting indication.
Click to expand...
Click to collapse
sorry it took so long to reply, but yep i waited 10 minutes for adb or any indication that it was going to boot. after reading drfandroid's post about getting august 10ths build to boot and not being able to get the newest nightly to boot, im thinking thats my problem too. ill try to use the one mentioned and see if i get different results.
whoshotjr2006 said:
sorry it took so long to reply, but yep i waited 10 minutes for adb or any indication that it was going to boot. after reading drfandroid's post about getting august 10ths build to boot and not being able to get the newest nightly to boot, im thinking thats my problem too. ill try to use the one mentioned and see if i get different results.
Click to expand...
Click to collapse
Well that sucks. Hopefully someone picks up development for this device. I'd like to try it out eventually. I have an HP Touchpad but it has Android on it as well. I havent looked into it yet but installing this might need a full wipe. I don't want to go through the hassel of starting all over again. lol
jsgraphicart said:
Well that sucks. Hopefully someone picks up development for this device. I'd like to try it out eventually. I have an HP Touchpad but it has Android on it as well. I havent looked into it yet but installing this might need a full wipe. I don't want to go through the hassel of starting all over again. lol
Click to expand...
Click to collapse
You're right, flashing it on your nexus pretty much requires a full wipe lol. The Gnex doesn't have dual-boot capability for LuneOS (yet!! ). I asked in the comments of the announcement post. Fingers crossed for that, though! Really hoping a dev steps out and continues the project, even if it's just on the side.
whoshotjr2006 said:
sorry it took so long to reply, but yep i waited 10 minutes for adb or any indication that it was going to boot. after reading drfandroid's post about getting august 10ths build to boot and not being able to get the newest nightly to boot, im thinking thats my problem too. ill try to use the one mentioned and see if i get different results.
Click to expand...
Click to collapse
Any luck with the August 10th build? My build can't activate developer options (Settings--> Developer Options, flicked the switch, still says "Developer mode is disabled"-->entered Konami Code into search, tapped on the dev mode result, nothing happened), so I can't activate USB Debugging or anything like that. On top of that, the phone takes forever to even boot into the Google screen, and I can't get into Recovery or Fastboot mode. In essence, even if I wanted to re-attempt to flash the nightly or go back to Android, I can't. I was hoping to go try the PA 4.6 Beta on my Gnex, so I was a bit gutted. Any ideas??
drfandroid said:
Any luck with the August 10th build? My build can't activate developer options (Settings--> Developer Options, flicked the switch, still says "Developer mode is disabled"-->entered Konami Code into search, tapped on the dev mode result, nothing happened), so I can't activate USB Debugging or anything like that. On top of that, the phone takes forever to even boot into the Google screen, and I can't get into Recovery or Fastboot mode. In essence, even if I wanted to re-attempt to flash the nightly or go back to Android, I can't. I was hoping to go try the PA 4.6 Beta on my Gnex, so I was a bit gutted. Any ideas??
Click to expand...
Click to collapse
yep no luck for me here, mine just wont boot into it at all. I can still access fastboot though, holding both volume buttons from and power from completely off doesnt get you into fastboot? if your volume button hardware has gone bad, i know you can buy new on ebay for cheap, might have to do that. sorry to hear about your problem, and I hope you get it fixed somehow.

Hard Reboot on attempt to change keyboard.

Hello everyone!
I made a stupid mistake of uninstalling my GO Keyboard app before disabling the input method. So I install the Google Keyboard app. But when I get to the point where I need to change the input method to Google Keyboard, the phone hard reboots, saying XPERIA then the boot animation. I tried everything but no luck.
Any help appreciated,
- cheesedude
Is the device rooted?
OwnDroid said:
Is the device rooted?
Click to expand...
Click to collapse
Yup, fully. I looked for an app like com.android.input to clear cache for, but I didn't find anything.
Typed from the terrible stock keyboard which changes to Chinese every few mins.
cheesedude said:
Yup, fully. I looked for an app like com.android.input to clear cache for, but I didn't find anything.
Typed from the terrible stock keyboard which changes to Chinese every few mins.
Click to expand...
Click to collapse
Lol XD, what kind of ROM do you run? Stock or CM based?
Stock D: My phone was £110 so I don't want any risks of a brick.
Any help? D:
Well thanks for the 'help' guys Seriously though you post on this forum no one replies for a day or so and then it is moved down to the bottom of the forum. And this reply thing is buggy as hell thanks for wasting my time and if Sony ever finds me, well screw you, you only take the popular. devices and update them, and leave the other devices to rot in bugs. Thank f***ing you, XDA, it took me 25 minutes to re type this because of your terrible website on mobile, and I can't change my profile picture from a terrible minecraft thingy to something proffessional. And before you people jump in and judge me as a 9 year old minecraft player, I am only pissed off.
Don't rage and factory reset.

Categories

Resources