Develop Bugs

Diagnosis code

hello guys, starting this trhead for a list of diagnostic codes. Samsung Omnia for 7 .. come forward and help all.
Enter always in diagnosis mode with: ##634# and hit the call button.
And now Try this code:
1) *#0*# for the LCD test
2) *#2*# for Debug Mode
3) *#3*# for TestBrigthnes
4) *#1234#* for Version
5) *#32489# for Test Mode - CIPHERING CONTROL
6) *#2263# for Test Mode - BAND PREFERENCE
7) *#0782# for RTC Time
8) *#0673# for MP3 Test
9) *#9090# for Test Mode - DIAG CONFIG
10) *#0842# for Vibrator Test
11) *#2580# for INTEGRITY CONTROL
12) *#0011# for Test Mode - WCDMA
13) *#7465625# for Personalize - Lock Status - Network Lock - Subset - SP Lock - Cp Lock
14) *#232337# for BT Mac Address
15) *#0002*28346# for INCREASE VOLUME !!!!!! - Sound Tuning: But i dont know use it - help me please
16) *#7284# for Micro USB Test (Zune Sync, Modem Tethered Call, Modem USB Diag)
17) *#1472365# for Location Service
18) *#05# for Simple Test
19) *#2470# for CameraFWUpdate

You can add :
Micro USB Test *#7284# (Zune Sync, Modem Tethered Call, Modem USB Diag)
Location Service *#1472365#
Simple Test *#05#
CameraFWUpdate *#2470#
PDAphoneAddict.com

Erwan960 said:
You can add :
Micro USB Test *#7284# (Zune Sync, Modem Tethered Call, Modem USB Diag)
Location Service *#1472365#
Simple Test *#05#
CameraFWUpdate *#2470#
PDAphoneAddict.com
Click to expand...
Click to collapse
Ok Many Tanks!!!

thank's but Not for Mozart maybe later ...

How do I input the codes once at the diagosntic screen?

What's with the beeping on the RTC Time screen?
The location service is actually pretty useful! It shows altitude and speed, as well as GPS co-ordinates.

more than 60 diagnosis codes
I've written 2 posts on my blog listing more than 60 diagnosis codes (tested on my Samsung Omnia 7), and how to use them:
post 1 : martani[dot]net/2010/12/windows-7-hacks-all-diagnosis-codes-you.html
post 2 : martani[dot]/2010/12/windows-7-hacks-all-diagnosis-codes-you_26.html (sorry can't post links yet!)
Enjoy

Long road almost there, error 67 :( calls & text ) but no data :( [evo on boost]

Long road almost there, error 67 :( calls & text ) but no data :( [evo on boost]
THE GOOD AND BAD NEWS... THE GOOD NEWS FIRST! i got my evo4g over to boost mobile with my boost account i already had open i can outgoing text and recieve text (no mms right now) i can call out and get calls in, works great shows my boost cell phone number on my evo and everything..
NOW THE PROBLEM...
my DATA doesn't work at all... i get the error 67
I TRIED THESE INSTRUCTIONS AFTER SEEING MY DATA DIDNT WORK..
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If data is not working move on to the next steps...
(Note: These are steps not verified by me as I still dont have neither 1x nor Evdo working but some people say 1 or 2 or all of these following steps combined worked for them, so i guess it depends on the network you are trying to get on)
1. First attempt to update your profile if it can or update PRL
Menu>Settings>About Phone>System Updates>Update Profile
Reboot and see if data works....
2. If still no Data, plug in your Hero to the computer, dial ##3424#, go to QPST folder and open QPST Configuration app.
Under the Ports Tab if the active COM port your phone is on is not in that list Click Add Port and add it.
Then go to Active Phones Tab, select the phone and then go to Start Clients>Service Programming
A new window opens, hit ok, then click Read From Phone on the bottom left, its gonna ask you for your MSL type it in
Then go to the M.IP Tab and under user profiles click on profile 0, click edit, and then deselect Profile Enabled, hit ok, then click Write to Phone.
Close the program unplug your hero, reboot it, and try your data again.
3. If still no data, plug in your old phone to the computer, open up QXDM
check Connections and make sure your COM port is being read.
Go to View>New>Common>NV Browser , in the Category Filter drop down menu, filter only Data
Then scroll down to ID numbers 1192 and 1194
Click read and copy down all the values in there until u reach 0x00
Then unplug your old phone and plug in your hero, dial in ##3424# and go to NV Browser
navigate to the same ID numbers 1192 and 1194, (just to be safe copy all the values here so you can revert back to the originals)
Then double click each value under the input column and it becomes changeable and change all the values to the ones from your old phone and hit write
Close QXDM unplug and reboot your hero, test Data again
4. If still no data, plug in your old phone to the computer, open up QXDM
check Connections and make sure your COM port is being read.
Go to View>New>Common>NV Browser , in the Category Filter drop down menu, filter only Data
Then scroll down to ID numbers 465 and 466
Click read and copy down all the values in there until u reach 0x00
Then unplug your old phone and plug in your hero, dial in ##3424# and go to NV Browser
navigate to the same ID numbers 465 and 466, (just to be safe copy all the values here so you can revert back to the originals)
Then double click each value under the input column and it becomes changeable and change all the values to the ones from your old phone and hit write
Close QXDM unplug and reboot your hero, test Data again
NONE OF IT WORKED.... SO I WENT TO THE SECOND SET OF INSTRUCTIONS.
Run the QPST config and plug in your phone, make sure your phone is detected in the COM port list. If not click Add New Port and add the one that it has detected your phone on. What it says may vary but USB will often be in the description.
Run QXDM click Options -> Communications and set the Target Port for the same one QPST config listed for your phone.
In the command box at the top type "spc 000000"
Note: If your SPC is not 000000 then you need to use the correct number instead!
If successful you will see a window titled "Command Output" that will output some text with the final line reading "SPC Result = Correct"
Next in the command box type "requestnvitemread ds_mip_ss_user_prof"
This will get you a lot of stuff in the Command Output window. It will start with the "DIAG TX item" section, ignore this one, we are interested in the "DIAG RX item" part.
The actual keys are 16 lines and marked in the output as 0-15. You will notice that quite handily both HA and AAA are both there. Take the part after the "0x" and that is actual key data. Just write down (or use word, notepad, whatever) to record this for safe keeping.
If you are doing this right then you have a long string of 30 characters all strung together for each key. DOUBLE CHECK YOUR COPYING! A single mistake will cause this to fail.
Putting the keys back into the phone:
Load QPST service programming, go to the M.IP tab. Double click profile 0 (in the white box) and use "Enter hex value" to enter your backups of your HA and AAA keys.
Write to phone.
Soft reset. (may not be required but I do it for good measure)
do "requestnvitemread ds_mip_ss_user_prof" for the sprint info and "requestnvitemread ds_mip_ss_user_prof 1" for the boost info
I'm telling you.. If you're getting the error 67, the following these steps above will fix it.. I'm on the Sprint network and the problem i was having was, in "Profile 0" The username which began with A000000 (this is actually your ESN #) Was from the original phone, not the donar phone... So i took the battery out the donor phone and looked at the ESN (not DEC) and began to type A00000 etc.
Then i used the steps above to get AAA Shared Secret from the Donor phone.. My AAA Shared Secret was 32 Alpha numeric characters...
i did that and still no dice.... i got the AAA key and the HA key .. both were 32 characters...
i even went as far as to get the profile info from the incognito phone, for profile 0 and 1, and made it exactly the same on my evo and addresses for the HA and alternate HA ADDRESS... still no dice.. i went into debug mode on my evo and even hit the restore to start fresh , and let it download the data via the servers... still didnt work...
i even re-entered the profile info and etc, for profile 0 and 1, and still not working
i know im close i just need to finish the puzzle please help.
oh yea, and when i go into debug mode it shows the authentication as failed.. i dont know how thats even possible I've triple checked the HA AND AAA keys via QXDM and they are the correct keys from the incognito boost phone.

[HOW TO] Restore your lost IMEI

If your IMEI is corrupted and/or shows 0s this could help you fix it. By using these steps you will not be able to change your IMEI to a different one than your original.
1.You need to be on stock ROM
2.Phone has to be rooted
3.Dial *#7284# on phone's keypad
4.Click Qualcomm USB Settings
5.Select RMNET + DM + MODEM and click ok
6.Download QPST and install it QPST
7.Connect T999 to Windows PC with USB cable (make sure you have all Samsung drivers installed and working)
8. In Windows open Device Manager, go to Ports (COM&LPT) and look up what port your T999 is using
9.Open QPST Configuration program
10.Click Add new port
11. Enter port (for example "COM6") from step 8 to boxes "Port" and "Port Label"
12.Open QPST RF NV Item Manager program
13.From top menu click on Settings then Comport
14. In Comport Configuration window click on drop down menu and select your port from Step 8 then click OK
15. In RF NV Item Manager click on Read Supported NV RF Items (first toolbar button or select it from File menu on the top)
16. Below on left side go to line number 550 and click on it
17. On the right side, check box "Hex" this will display 9 boxes below where you enter your IMEI
18. You enter it in pairs of 2 digits and backwards
Example:
your IMEI is 353024052511214
8 (this number is not part of your IMEI but has to be entered)
3a (first digit of your IMEI ,"a" has to be there also)
35
20
04 (this can be written as just 4 also)
25
15
21
41
19. Click Write NV button
20.You can reboot and disconnect your phone now.
21. On your phone's keypad dial *#7284# go to settings and check MTP + ADB to go back to original state.
Source of info above

[Q] Cannot switch the phone from UART to USB

T999 - pertinent replies are appreciated.
Dialed *#197328640# > UMTS > COMMON > DIAG CONFIG >
Code:
DIAG CONFIG
[1] USB ( )
[2] UART (*)
[3] DBG MSG ON (*)
[4] DBG MSG OFF ( )
Select the 1st option to switch it to USB and it comes back with:
Code:
USB_Diag Selected
Change Complete.
If You change Uart or USB diag
Please reboot the mobile.
Then, use Settings Key and select "Back" the USB is NOT selected.
Any ideas on how to get it switch to USB?
Tried the diag scripts but they don't enable it either. +those scripts are only for users not on TW (right?).
I've searched quite a bit for a while now with no luck. Need answer(s) specific to this phone as most solutions etc. including some of the USSD codes (eg. *#9090#) that work on other SGSIII don't necessarily work on T999.
The phone is still sim/network locked. Stock ICS 4.0.4 UVLH4 / Insecure Kernel / Rooted and busybox installed.

c'mon, someone's gotta have an answer to this...

I'm on the same boat now. I cant get it to switch to USB.

anyone ever figure this out???

Can you give a little more background ? What is the original problem that led you to try this solution ? Also what happens when you connect to a PC ? Does the MTP come on ?
After that second message about reboot, don't use back button do reboot.

try: menu >> key input >> 1

*#7284# ............ *#0808#
:fingers-crossed:

Restoring IMEI Number for mtk device

This guide is only for Android smartphones who has problems with IMEI number on MTK chipsets….
“I am not responsible for any damage caused to your phone by using this”
Method 1 – Using Engineer Mode (You must have rooted your device before doing this procedure)
Open the Dialer and type *#*#3646633#*#* you will enter the MTK Engineering Mode or using Mobile Uncle APP Hit the Engineer Mode option and choose the Engineer Mode (MTK).
On EngineerMode Chosee Connectivity and click the CDS information option.
You will see Radio information there and after tapping on it. If you have dual SIM ANDROID then you will see TWO option select any one on which you want to write IMEI with.
Click Phone 1
At “AT+” line add : AT+EGMR = 1,7,”my_first_IMEI_code”
Click on “SEND AT” button below
For second SIM tap Phone 2 and type this command
AT+EGMR=1,10,”my_second_IMEI_code”
Click on “SEND AT COMMAND” button below a second time
Reboot phone
Verify codes with *#06#* if IMEI codes are ok
Method 2 – Using Terminal Emulator (You must have rooted your device before doing this procedure)
change imei with terminal emulator
Install Terminal Emulator
Launch the Terminal Emulator app
Type SU then press ENTER button to get Superuser permission
After that, type this command then press ENTER button
echo ‘AT+EGMR=1,7,”IMEI_NUMBER”‘ >/dev/pttycmd1
If you have dual SIM add this line
echo ‘AT+EGMR=1,10,”IMEI_NUMBER”‘ >/dev/pttycmd1
Last step, reboot your phone/tablet and DONE!
Method 3 – Using MTK Droid Tool
Download MTK droid tools and Extract on your PC/Laptop
Download Universal USB Driver
Enable USB debugging on the phone then connect it to the PC (don’t enable mass storage)
Install Universal USB Driver on the PC with the phone connected; you should get a message saying drivers installed successfully.
Launch MTK droid tools on the PC (still with phone connected to PC)
MTK droid tools should detect and display your phones details
Next you need to click the ROOT button so that it will temporary have Root shell access on your phone in order for it to make the script work on the background.
Click on IMEI/NVRAM
change imei mtkdroid tool
Put your 15 Digits IMEI Number that you can get at the back of your phone inside not the back cover if you have 2 IMEI you need to put that.
Then click Replace IMEI
Restart your phone if it isn’t automatically restarted
Your IMEI issue should have been resolved
I am not responsible for any damage to your phone,do it at your own risk.

Instead we can use mobileuncle tools application from play store for this we need root

Fix Found .
Ghostrider26 said:
This guide is only for Android smartphones who has problems with IMEI number on MTK chipsets….
“I am not responsible for any damage caused to your phone by using this”
Method 1 – Using Engineer Mode (You must have rooted your device before doing this procedure)
Open the Dialer and type *#*#3646633#*#* you will enter the MTK Engineering Mode or using Mobile Uncle APP Hit the Engineer Mode option and choose the Engineer Mode (MTK).
On EngineerMode Chosee Connectivity and click the CDS information option.
You will see Radio information there and after tapping on it. If you have dual SIM ANDROID then you will see TWO option select any one on which you want to write IMEI with.
Click Phone 1
At “AT+” line add : AT+EGMR = 1,7,”my_first_IMEI_code”
Click on “SEND AT” button below
For second SIM tap Phone 2 and type this command
AT+EGMR=1,10,”my_second_IMEI_code”
Click on “SEND AT COMMAND” button below a second time
Reboot phone
Verify codes with *#06#* if IMEI codes are ok
Method 2 – Using Terminal Emulator (You must have rooted your device before doing this procedure)
change imei with terminal emulator
Install Terminal Emulator
Launch the Terminal Emulator app
Type SU then press ENTER button to get Superuser permission
After that, type this command then press ENTER button
echo ‘AT+EGMR=1,7,”IMEI_NUMBER”‘ >/dev/pttycmd1
If you have dual SIM add this line
echo ‘AT+EGMR=1,10,”IMEI_NUMBER”‘ >/dev/pttycmd1
Last step, reboot your phone/tablet and DONE!
Method 3 – Using MTK Droid Tool
Download MTK droid tools and Extract on your PC/Laptop
Download Universal USB Driver
Enable USB debugging on the phone then connect it to the PC (don’t enable mass storage)
Install Universal USB Driver on the PC with the phone connected; you should get a message saying drivers installed successfully.
Launch MTK droid tools on the PC (still with phone connected to PC)
MTK droid tools should detect and display your phones details
Next you need to click the ROOT button so that it will temporary have Root shell access on your phone in order for it to make the script work on the background.
Click on IMEI/NVRAM
change imei mtkdroid tool
Put your 15 Digits IMEI Number that you can get at the back of your phone inside not the back cover if you have 2 IMEI you need to put that.
Then click Replace IMEI
Restart your phone if it isn’t automatically restarted
Your IMEI issue should have been resolved
I am not responsible for any damage to your phone,do it at your own risk.
Click to expand...
Click to collapse
Please thank me if i helped you.
Fix found : -> http://forum.xda-developers.com/canvas-a1/general/fix-imei-perfect-fix-android-imei-t2943567

this will work in old versions, I tried in Engineer Mode v1.8.0, CDS Information is gone, had to flash my device with Android 5.1 and probably an older version of Engineer Mode app

Imei change mtk 6753 homtom ht20 pro android 6.0 sdk 23
NO ROOT
In dialler
*#*#12306#*#*
bring you to secret sub menu in mtk engineering mode
not available in this menu by using this code to *#*#3646633#*#* that option change imei is not available in NORMAL MTK Engineering MODE as CDS information witch one REQUIRED ROOT PERMISSION TO ADD CDS information IN SUB MENU IN NORMAL MTK Engineering MODE

Error shown this command is not allowed in user build. please tell what to do next
Error shown this command is not allowed in user build. please tell what to do next

kbsoni156 said:
Error shown this command is not allowed in user build. please tell what to do next
Click to expand...
Click to collapse
Put a space after AT like "AT +" and not "AT+". Rest should be written as above..

I recently found a problem while doing method 1
"This command is not allowed in user build"
So the solution for that is:-
When we are writing
AT+EGMR = 1,7,”IMEI_code”
we have to give a space b/w AT and +
so final command will be like this
AT +EGMR=1,7,"IMEI_code"
Hit thanks if it worked for u

vinaykharayat said:
I recently found a problem while doing method 1
"This command is not allowed in user build"
So the solution for that is:-
When we are writing
AT+EGMR = 1,7,”IMEI_code”
we have to give a space b/w AT and +
so final command will be like this
AT +EGMR=1,7,"IMEI_code"
Hit thanks if it worked for u
Click to expand...
Click to collapse
FWIW, this doesn't work on a BLU Vivo 5R running Nougat. Gives the same not allowed error with or without the space.

lugnut2099 said:
FWIW, this doesn't work on a BLU Vivo 5R running Nougat. Gives the same not allowed error with or without the space.
Click to expand...
Click to collapse
And just to add on, the terminal commands don't work either. They're accepted without any kind of error, but upon reboot there's still nothing there.

Thanks
It worked perfectly on Lenovo tab 2 a8-50lc, couldn't click thank you button though, its greyed out.
P.s: must have root access. Tried without root gave not allowed in userbuild.

lugnut2099 said:
And just to add on, the terminal commands don't work either. They're accepted without any kind of error, but upon reboot there's still nothing there.
Click to expand...
Click to collapse
No error message either, but not working also.
//Tested on ZTE Blade V10, Android 9, V1.8