Related
What is the best thinnest case for the samsung captivate!
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
I have tried three different cases and found that thr "Body Glove" seems to be the one I end up using the most. It is very thin, tight fitting and feels good while holding the phone. There are really several good choices around. This is of course IMHO.
Sent from my SAMSUNG-SGH-I897 using XDA App
i use the bodyglove case with the diagonal lines on the back. my brother uses the sedio one that snaps in 2 and has the smooth body. the body glove is a little thinner and looks more stylish. both are around 15-20 dollars. i prefer the body glove one because of the back actually, just adds a little touch to an otherwise plain looking phone. both are nice because they dont pick up dust and lint like the cheapo 2 dollar ones. you can tell quality by the seams of the rubber and smell. you get what you pay for. if your phone is worth 400, why spend 2 dollars on a case right?
fastkx450 said:
What is the best thinnest case for the samsung captivate!
Click to expand...
Click to collapse
How much protection are you wanting exactly?
Just picked up the Body Glove yesterday. Really like it, doesn't collect dust and very thin. Good fit also.
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Check these out. They are not as sticky as regular silicone skins and they are fairly thin + cheap.
http://cgi.ebay.com/WHITE-TPU-CASE-...137991?pt=PDA_Accessories&hash=item3cb26715c7
http://cgi.ebay.com/SMOKE-Crystal-S...139274?pt=PDA_Accessories&hash=item5d2d4f700a
http://cgi.ebay.com/BLACK-TPU-SKIN-...791504?pt=PDA_Accessories&hash=item415455ec90
http://cgi.ebay.com/ORANGE-TPU-SKIN...810059?pt=PDA_Accessories&hash=item19c287018b
6 for 11$
http://cgi.ebay.com/6-x-Color-TPU-G...296126?pt=PDA_Accessories&hash=item3f06a32a3e
http://cgi.ebay.com/2x-Tpu-Gel-Case...544565?pt=PDA_Accessories&hash=item5ade97c375
http://cgi.ebay.com/Red-TPU-Crystal...340454?pt=PDA_Accessories&hash=item19c2cc2266
Body Glove is pretty darn thin. I have one but I replaced it with the Otterbox Commuter, just to change things up. Commuter is a bit thicker but I don't mind it at all so I am sticking with it. I do recommend the Body Glove though. Good sleeve.
Plus one for body glove.
Its perfect. Smooth enough that it comes out of pocket easy, but grippy enuff that I can throw it on dashboard without it flying off with the first turn I make.
I also think it looks great, fits perfectly, and I can hold the phone without dropping it-which is the reason I wanted it in the first place
are you looking for a hard case or skin? body glove or a tpu skin is your best bet for the thinnest protection but if you want a hard case then check out Seidio innocase surface
I just got a Xmatrix case (I think its a knock off as its not rubberized anywhere) but the fit is great and gives you a near naked feel. Covers the back and adds a bit to the front edge so the screen does not touch a flat surface if you lay it face down.
MobileNick said:
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
Click to expand...
Click to collapse
I just ordered one of these today, sounds like a good one.
Amzer argyle for $4
Sent from my GT-I9000 using XDA App
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
jgc121 said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
Click to expand...
Click to collapse
Looks just like a TPU case which if you don't mind having a not as fancy case you can get the Amzer one on amazon for $5 shipped and the knockoff ones on ebay for about $3-4 shipped. But the case you linked to is one very nice looking case.
All nice looking cases. I may have to try the TPU out. Looks nice.
Sent from my SAMSUNG-SGH-I897 using XDA App
bay_wolf said:
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Click to expand...
Click to collapse
+1
That Amzer case does it's job very well. It protects, looks good, thin and is subtle in a good way. The fact that it is now ~$6.00 makes it an absolute steal. I usually don't buy cheap stuff for my phone (or for anything for that matter) but this case performs like a $20 case.
Only issue I have with it is that mine seem to be less snug than it was when I first got it. I only take off my case when I have to do a battery pull so it's a bit surprising that it got loose so easily. I recently bought a Otterbox Commuter to replace this case because I was getting bored with it but I wouldn't say I changed because it was necessary; it was just cause I was bored and I found a good deal for it.
+1 for the xmatrix case. It's a hard case but very slim and is a good fit without any movement or shuffling. Plus, there is a minor lip on the front so you can rest it face down.
It snaps on in the back...just one piece.
Body glove for sure best slim streamline case
Sent from Serendipity 5.3 Captivate via XDA app
Does anyone have this one or used it? I just watched the video of it at Wireless Ground and it seems pretty high quality (for a silicon case). Would like to hear your thoughts. Its getting harder to wait for the Otterbox.
http://www.wirelessground.com/t-mobile-mytouch-4g-silicone-case-black.html
Looks OK. I had a silicon case and I hated it. Waste of $9. Really tacky, hard to remove from pocket, dust magnet, messed with screen protector.
If you want a temporary solution while you wait for the Otterbox, I recommend a TPU case.
The link below is what I am rocking!!! CHEAP and WORKS WONDERS!!!
http://www.amazon.com/Black-Rubberi...YPTE/ref=sr_1_3?ie=UTF8&qid=1296684592&sr=8-3
I have this and have had no problems. Absorbed one drop with no damage and doesn't get in the way. Super easy to remove and seems to retain shape well.
Sent from my HTC Glacier using XDA App
TPU is the way to go
I just ordered one. I'll let you know how the quality is when I receive it. It has to better than the TMo silicon case that I've had since launch. This thing is all stretched out like a used....ah, you know what I mean.
Sent from my HTC Glacier using XDA App
Thanks for the feedback guys, looking forward to how you like it Maxxreign. Please do update. I have a tpu case now from tpu-cases.com and I am not a big fan simply because it covers and power button and makes it difficult to press. I love the tpu feeling and how it doesn't attract dust though. Tpu doesn't have much give so I am not sure how much protection it would give you if you dropped the phone. I had ordered a $3 silicon case from Amazon (from SF Planet) http://www.amazon.com/Black-Silicon...MMWK/ref=sr_1_1?ie=UTF8&qid=1297189892&sr=8-1
and I dig if for the moment. Slides in and out of the pocket easily. I think I will be sticking with silicon for the moment.
I've gone through my fair share of cases for the MT4G: TMo silicon, Case Mate CC case and the Seidio case. I love Case Mate cases but the added CC sleeve makes for added bulk and the Seidio case just creaks/squeaks like crazy. I'm not a big fan of the silicone cases collecting dust either but they feel great in hand.
We'll keep you all posted.
@DMC78 OEM silicon case came in from WG yesterday. Fit, finish and quality is far superior to the TMo one. Unlike the Tmo case, the power, volume and camera buttons are exposed and the edges ride up a little higher to make for a better fit. In addition, the silicon is a lot thinner. IMHO, this is by far the best case I've owned for the MT4G.
Sent from my HTC Glacier using XDA App
Thanks for the feedback. How is it for attracting lint? Does it fit pretty snug?
Being silicon, it still attracts lint. However, not as much as the TMo one. The finish is comparable to the finish of the hard cases by Case-Mate. Granted it could be because it's new, the case fits really snug.
So I'm that type of person who has a case for every day of the week. Lol
I have here in order from left to right on the picture
Case logic pouch (For Android/Windows Phones is what it said on the packaging)
Otterbox Defender
Otterbox Commuter
Generic Black TPU Case from ebay
Generic blue hard snap on case.
The leather pouch is awesome! It fits the phone naked or with any of my cases with the exception of the otterbox defender. I had a Seidio spring loaded holster for use with the Captivate+Innocase and it had a very snug fit for the Atrix+any of the other cases aside from the Defender.
The defender is actually really nice on this phone! I had it on the Captivate and it was wayyy to bulky and it made it extremely frustrating whenever you tried to touch the capacitive buttons on the bottom. With the Atrix, it doesn't add too much bulk and I can feel safe whenever I have it on my phone. I usually use this one when I know I'm going somewhere where they'll be potential damage to my phone like the beach.
The commuter is my personal favorite case! It looks real nice with the fancy design on the back. It doesn't add too much bulk, but does add a good ammount of protection. I find it strange that all the Captivate otterbox cases make the phone twice as big, but that's not the same case for the Atrix. It's even stranger that a naked Atrix is bulkier than a naked Captivate.
The generic black TPU is also pretty nice. It doesn't add much bulk at all, but TPU usually offers good protection. Mine specifically has that stupid common Argyle pattern, but it's in the inside so it's not shown on the back of my phone! The only problem I have with this case is the fact that it attracts fingerprints like no tomorrow.
The generic blue snap on case was an impulse buy when I got my phone. I just wanted to make sure it was protected out of the box. I don't really like this case too much as I'm not a big fan of hard cases to begin with.
I'm still waiting on the Candyshell, and other cases to come out. I'll update asap!
If anyone has any detailed questions about any of the cases, let me know!!!
F_L_Abs said:
So I'm that type of person who has a case for every day of the week. Lol
I have here in order from left to right on the picture
Case logic pouch (For Android/Windows Phones is what it said on the packaging)
Otterbox Defender
Otterbox Commuter
Generic Black TPU Case from ebay
Generic blue hard snap on case.
The leather pouch is awesome! It fits the phone naked or with any of my cases with the exception of the otterbox defender. I had a Seidio spring loaded holster for use with the Captivate+Innocase and it had a very snug fit for the Atrix+any of the other cases aside from the Defender.
The defender is actually really nice on this phone! I had it on the Captivate and it was wayyy to bulky and it made it extremely frustrating whenever you tried to touch the capacitive buttons on the bottom. With the Atrix, it doesn't add too much bulk and I can feel safe whenever I have it on my phone. I usually use this one when I know I'm going somewhere where they'll be potential damage to my phone like the beach.
The commuter is my personal favorite case! It looks real nice with the fancy design on the back. It doesn't add too much bulk, but does add a good ammount of protection. I find it strange that all the Captivate otterbox cases make the phone twice as big, but that's not the same case for the Atrix. It's even stranger that a naked Atrix is bulkier than a naked Captivate.
The generic black TPU is also pretty nice. It doesn't add much bulk at all, but TPU usually offers good protection. Mine specifically has that stupid common Argyle pattern, but it's in the inside so it's not shown on the back of my phone! The only problem I have with this case is the fact that it attracts fingerprints like no tomorrow.
The generic blue snap on case was an impulse buy when I got my phone. I just wanted to make sure it was protected out of the box. I don't really like this case too much as I'm not a big fan of hard cases to begin with.
I'm still waiting on the Candyshell, and other cases to come out. I'll update asap!
If anyone has any detailed questions about any of the cases, let me know!!!
Click to expand...
Click to collapse
I dont feel like a loner anymore lol! I've always been obsessed with cases. I have the OBD, OBC, Feather, Bodyglove and the Candyshell. Caint wait for Sedio to release a Active X or Rugged. I'm also hoping for some case-mates soon? Request? http://support.case-mate.com/index.php?pg=request
I'm waiting on the seidio active x with holster! I loved the seidio holster I had for my captivate! It works pretty well still with certain atrix cases, but I ended up giving it away. Lol
Not the biggest case mate fan but ill submit a request and well see ;Db
Sent from my MB860 using XDA Premium App
You are not alone I couldn't decide btwn the defender or commuter so I got both to test out in person. I ended up liking.g the commuter mainly BC I had trouble plugging in some headphone jack devices because the defender is slightly bulkier
Sent from my MB860 using XDA App
I just ordered the black tpu with the argyle pattern on the inside off Amazon. I have a question for you, the buttons for volume look molded in, how hard is it to push the buttons with the case on?
How much bulk does the commuter add? I'm thinking of picking it up but I don't want it to be fat
Sent from my MB860 using XDA App
I didn't find it harder to press at all with the tpu case. Then again that might just be me not paying full attention to it. I'm not very picky... lol
The commuter does add a bit of bulk, but I don't think its bad at all especially for the ammount of protection it adds. I do also really dig the design on the back! I heard that it won't fit with any docks though to give you an idea. I was able to dock my phone with the TPU case though.
Sent from my Desire HD using XDA Premium App
bigc_13 said:
How much bulk does the commuter add? I'm thinking of picking it up but I don't want it to be fat
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
That was my biggest concern because I didnt really want a case but didn't want a broken phone. So I got the commuter and love that it doesn't make it that much bigger but makes it feel a ton safer.
Sent from my MB860 using XDA App
I just got the TPU case... dropped it from my lap getting out of the car in a parking garage.. unscathed. great case.. doesnt look as fancy as others but it does the job and its a pretty good price.
yeah, i bought a few of those snap on hard cases just for the sake of protection, however, they are a ***** to get off! And i use my vehicle dock often, so thats a no go. I bought a clear skin (like a zaag), and havent looked back since. It actually makes the back of the phone shinny and the CF weave pattern really POP...looks more like real CF
After checked a cpl of cases for my new Atrix, I found one in HK and its dirt cheap too ($6!!). Dual material PC + TPU with transparent back, flame, scratch resistant, very light and thin, washable too. The fact I disliked about otterbox and similar heavy armed cases (aside of being very bulky) is a lack of heat dissipation.
My suggestion goes for Momax iCasePro:
http://www.momax.net/en/Product_Show.aspx?ID=1415&T=1
Top notch.
F_L_Abs said:
So I'm that type of person who has a case for every day of the week. Lol
I have here in order from left to right on the picture
Case logic pouch (For Android/Windows Phones is what it said on the packaging)
Otterbox Defender
Otterbox Commuter
Generic Black TPU Case from ebay
Generic blue hard snap on case.
The leather pouch is awesome! It fits the phone naked or with any of my cases with the exception of the otterbox defender. I had a Seidio spring loaded holster for use with the Captivate+Innocase and it had a very snug fit for the Atrix+any of the other cases aside from the Defender.
The defender is actually really nice on this phone! I had it on the Captivate and it was wayyy to bulky and it made it extremely frustrating whenever you tried to touch the capacitive buttons on the bottom. With the Atrix, it doesn't add too much bulk and I can feel safe whenever I have it on my phone. I usually use this one when I know I'm going somewhere where they'll be potential damage to my phone like the beach.
The commuter is my personal favorite case! It looks real nice with the fancy design on the back. It doesn't add too much bulk, but does add a good ammount of protection. I find it strange that all the Captivate otterbox cases make the phone twice as big, but that's not the same case for the Atrix. It's even stranger that a naked Atrix is bulkier than a naked Captivate.
The generic black TPU is also pretty nice. It doesn't add much bulk at all, but TPU usually offers good protection. Mine specifically has that stupid common Argyle pattern, but it's in the inside so it's not shown on the back of my phone! The only problem I have with this case is the fact that it attracts fingerprints like no tomorrow.
The generic blue snap on case was an impulse buy when I got my phone. I just wanted to make sure it was protected out of the box. I don't really like this case too much as I'm not a big fan of hard cases to begin with.
I'm still waiting on the Candyshell, and other cases to come out. I'll update asap!
If anyone has any detailed questions about any of the cases, let me know!!!
Click to expand...
Click to collapse
Do they have those leather cases but sideways????? I'm looking for one that will fit those tpu cases as well.
Yes they do! I bought it at a local supermarket kinda store, but I did see it at Wally World too.
The description specifically sais "for Windows and Android Phones"
Sent from my MB860 using XDA Premium App
Helpful post, I got the commuter, it's pretty good
never really saw the need for a case it makes a good phone look ugly and doesnt really protect i prefer invisible shields
Until it slips out of your hands and hits the ground and ends up looking worse than with a case..... I like the look of the commuter otter box case
Sent from my MB860 using XDA Premium App
Question for anyone that does not mind answering. I currently have the otterbox defender which I have to say I enjoy having it while I am out running around etc. Like that feeling of safety with the "hefty" case since I have large hands does not bother me to much. BUT, I was thinking of getting another case to use just around the house and thinking about the feather case or something small and minimal. I tend to set my phone face down most of the time. Any suggestions? also to expound upon that if anyone else has tried or done this before if I did that i would look into getting a adhesive screen protector. If I did that would it work with the otterbox defender and its built in screen protector would I maybe have to cut that out? Which I am not totally opposed to just seems almost like a waste. I know gorilla glass is tough stuff I am just the meticulous kind of person that if i saw the scratch on my screen I would not be able to let it go and it would drive me crazy.
Ryan,
I would suggest either the otterbox commuter (still kinda bulky, but not as bad as the defender), or the body glove mirage (nice and thin).
As far as the screen protector, I've used the matte/anti glare from att with the defender. I do kinda notice its not as responsive when I'm typing and etc, but thar might just be a mental thing.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Hi, i was wondering about which case buy and want to see your opinions about the best case for the cappy.
I've been watching the Trident Clyclops: http://www.cyclopscase.com/products/Trident-Cyclops-Protective-Case-for-Samsung-Captivate--Red.html
And also the otterbox http://www.otterbox.com/samsung-captivate-cases/samsung-captivate-cases,default,sc.html.
Seidio http://www.seidioonline.com/product-p/csk3sscap-rd.htm?
Body Glove http://www.bodyglovemobile.com/produ...and,219,19.htm
Otterbox Defender is amaxing
Sent from my Darky's ROM 10.2 EE Captivate using XDA App
I had issues getting to the four buttons with the Otterbox Defender. Nevertheless, in terms of protection, I trust them wholeheartedly.
Anyone has tested the Trident?
In addition to otterbox and cyclops look at the seidio active x.
this one http://www.seidioonline.com/product-p/csk3sscap-rd.htm? i like the desing
I just had my second Otterbox holster break. They replaced the first one without batting an eye. I haven't had a chance to call about #2, but frankly I'm not sure if I want to risk it. Fortunately the phone fell out while I was driving my car, not my motorcycle, but I'm not sure I want to risk it again.
So far it's the only case I've tried.
I hate to buck the trend, but I really like the cheap TPU eBay cases. I know, I know, some of us think you need to spend a lot to pamper your Cappy, but I do have my reasons.
They are cheap. I'm big on spending less than $5 for things.
TPU is a great blend of rigidity and pliability. I think silicone is a touch too soft to disperse impact energy, and hard plastic transmits the energy to the phone and often breaks in the process.
They are slick, but easy to hold. I carry my phone in my pocket. I think holsters look kinda dumb. TPU is generally very smooth and slides in and out of a pocket very nicely.
They are thin. Many of the hard molded cases turn your sexy-thin Captivate into a non-sexy blob, cool molded patterns notwithstanding. Lots of the silicone cases have kind of a shapeless look that I don't like.
I've been using a plain black TPU case for a while now, and I get lots of comments on how thin my phone is. I've also dropped it several times with no ill effect, except a less shiny spot on one corner of the cover. No complaints, and I really have a hard time imagining how the expensive ones are better.
TPU is nice and much, much better than silicone. I wish otter/seidio/trident would use TPU. I have a thin TPU case (body glove) and like it alot. Its just sometimes I want the thicker, two layered plastic and rubber case which is why I also have the seidio active.
The first case I bought was the pdair aluminum which would be a nice case but it kills the cellular signal so I can't recommend anyone buy it. Wifi works fine so if I ever travel somewhere I won't have service I plan on using it.
I like my Bodyglove case just fine. I've used it since the launch of the cappy and couldn't be happier. It's more rigid than silicone and less bulky than the otterbox. I've dropped my cappy numerous times on pavement, and as long as a jutting edge doesn't hit the screen it won't break. There is a slight lip on the front of the body glove that makes it so the screen doesn't hit when dropped on a flat surface.
asrrin29 said:
I like my Bodyglove case just fine. I've used it since the launch of the cappy and couldn't be happier. It's more rigid than silicone and less bulky than the otterbox. I've dropped my cappy numerous times on pavement, and as long as a jutting edge doesn't hit the screen it won't break. There is a slight lip on the front of the body glove that makes it so the screen doesn't hit when dropped on a flat surface.
Click to expand...
Click to collapse
This right? http://www.bodyglovemobile.com/prod...-glove-snap-on-case-with-clipstand,219,19.htm
Is like the otterbox impact, i guess.
I just bought today the body glove, found a great offer in ebay. I will post my opinion after test it.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
I have the Otterbox Defender and I love it
I have an Otterbox Defender for my Captivate, but my Galaxy S 2 is naked. Need to find one for it.
I love my body glove, the phone is slim and easy to handle. I never droped yet but it feels really solid.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
I have a generic silicone protector on my cappy, and fits so good on it, looks so pro.
NightHawk877 said:
I have an Otterbox Defender for my Captivate, but my Galaxy S 2 is naked. Need to find one for it.
Click to expand...
Click to collapse
Last I checked, Otterbox only has the Commuter for the S2, ATM.
Body Glove
I have bought like 5 cases for my cappy, the Otterbox, Body Glove, a slim hard plastic snap on case and a full hard snap on case.
In the end my 2 favorites are the Body Glove and the Slim snap on that snaps only on the back.
The otterbox case is nice, it is just too bulky. I use the Body Glove daily because it protects from impact, is not bulky and slides in and out of the pocket easy.
Moving forward I am all about the TPU cases.
I use this case http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HK3SSCAP-BK
Look on ebay, I've seen these for $35. Dropped the phone twice and there's no damage on the phone at all.
I use the otterbox commuter with an invisible shield screen protector. I work with concrete and often get my phone cpvered with dust and grime. The case gets really dirty but when I remove it the phone is still perfect. I would take this case over the bulky defender version.
Sent from my SGH-I897 using XDA Premium App
Particularly one that can fit the OEM extended battery (which, speaking of, where's the best/cheapest place to get it)?
I'm used to just going for Otterbox, but the one for the Nexus looks ugly and like a complete lint/dirt magnet (the notification light cut-out part particularly). I already have a thin/light case on the way, which I got before I realized how small my hands are and how cautious I am about not dropping to phone due to a lack of grip when using one-handed - and it's already dropped once and left a tiny scratch on the back...and I've never dropped my phone before getting a Nexus.
So...recommendations? I read about Ballistic and Aegis cases a bit but aren't familiar with them at all. Seidio cases look nice, but no idea what kind of protection they offer. Anything with a plain black base is preferable, color accents would be nice (including pink if it's not too gaudy) - anything with a light base (white especially) is out.
I think the Trident Kraken is the most protective case out there. It's not very grippy b/c of the plastic being on the outside though. And it has a kickstand
Ngo93 said:
I think the Trident Kraken is the most protective case out there. It's not very grippy b/c of the plastic being on the outside though. And it has a kickstand
Click to expand...
Click to collapse
It looks grippy and rubbery from pictures, it's just a hard/smooth plastic on the outside? It looks nice otherwise, thanks. And is the kickstand plastic or metal?
I bought an Otterbox Defender series for Galaxy Nexus. It is fitting both the standard and the stock extended battery. It is the only case that has a tough protective material for the display also. Of course, it is stealing a little of the clarity, but it is a fair trade for the toughness that is providing.
ro_explorer said:
I bought an Otterbox Defender series for Galaxy Nexus. It is fitting both the standard and the stock extended battery. It is the only case that has a tough protective material for the display also. Of course, it is stealing a little of the clarity, but it is a fair trade for the toughness that is providing.
Click to expand...
Click to collapse
How's the material on the back? I had two Otterbox Commuter cases and found the back to be way too slippery/smooth (it was fine since the phones were small enough to grip easily). And is it possible to remove the screen protector? I already have a good matte screen protector on.
At the moment I'm kinda leaning toward the Trident Kraken for basically being a two-part case and being kinda nice-looking too.
The material on the back is a VERY grippy silicone. No plastic on the outside.
It is possible to remove the screen protector (I've seen other people doing it) but why in the world would you like to do it?
I bough the case to take the phone out on my mountain biking rides where I really need a tough screen protector not for the scratches but for the rocks .
I also have a XO screen protector on the display, for regular use.
I'm not using the tough case daily .. it is transforming the phone in the life signs detector used by the Earth crew in Stargate Atlantins
---------- Post added at 09:30 PM ---------- Previous post was at 09:26 PM ----------
I just recompiled what you wrote ... the otterbox IS two part case .. a polycarbonate case (which has the screen protector) which is fitting in a silicone enclosure ... and you also get a polycarbonate holster for the whole assembly
Try out the Seidio Convert case. I use it while at work and it is a pretty nice case!
http://www.seidioonline.com/samsung-galaxy-nexus-convert-case-holster-black-p/bd4-hkr4ssgnl.htm
Sent from my Galaxy Nexus using xda app-developers app
I've got the Ballistic. Seriously, it's awesome. I don't fear dropping it and it gives much more protection than the commuter. Says it was designed for the non gsm version, but my gsm with stock battery work perfect, so I guess with the extended it will also work. Very good grip on the back, seriously with the shell and silicon I don'T even think about the grip I sometimes just want to drop it lol. Corners = win.
Also, It looks manly. Fits in pocket, corners sometimes make it harder to pull out/in if you're sitting.
I would try the Seidio convert only if I decide to buy the extended. Looks beastly.
http://www.youtube.com/watch?v=UE_Z31IIByw
I don't care for the screen protector built-in the Defender since I already have a matte screen protector that diminishes the screen quality (and having a clear/glossy protector on top of it would also defeat the purpose of the anti-glare and silky feeling of the matte protector), and while I'm sold in the protection, I'm not sold on the looks of the front (the area around the LED is a bit much if you ask me, and seems like it'd make it difficult to see the LED at certain angles).
The belt clip/holster on any case (Defender included) are useless to me, but a kickstand (that doesn't require a belt clip) is very nice...and as a result I'm kinda stuck between the Seidio Active with kickstand (for price) and Trident Kraken (for looks and being two-part; being able to get different-colored bases for cheap is a huge plus).
Any other suggestions with kickstands would be nice, and I do appreciate the other input/suggestions; while I'm certainly not against multiple cases, I only have money for one and want it to last at least a month.
And yeah, "manly" looks aren't exactly a pro for me =P
I bought the Defender in pink so could use the extended battery, and I wanted something rugged. My husband got the Trident Kraken. His looks nicer but he complains that it is too slippery. Not sure if there is a perfect case out there
magus57 said:
Particularly one that can fit the OEM extended battery (which, speaking of, where's the best/cheapest place to get it)?
Click to expand...
Click to collapse
Got mine from a Korean seller on eBay (think it was shim shop or similar - had good seller ratings). Took a while to arrive but its the real deal.
SGS Hybrid and Zenus cases are fine with the bigger battery, but not very heavy duty.
Trident kraken is by far the most protective and will fit both stock and extended battery. It's not as grippy as the defender but it's by far better quality and the kickstand can be taken out and other accessories like gps mount, bike mount, desk mount, and tripod can be used with the case
I said screw buying a case for my nexus, when I can buy a complete rear housing and battery door for $20 on eBay. When the housing gets scuffed up replace it.