Related
Yesterday, I got the Update 6.3.1 and because I have CMW installed, it blocked the update and I get the yellow triangle. Then I changed the recovery from CMW to TWRP and my kindle update successfully with stock bootloader and recovery back. And I can get in the system.
I want to root it again but on my Mac, I cannot use the KFU, so I use the method here (http://forum.xda-developers.com/showthread.php?p=24129239).
After I issued these commands:
"
adb push fbmode /data/local/fbmode
adb shell chmod 755 /data/local/fbmode
adb shell /data/local/fbmode
adb reboot
fastboot -i 0x1949 flash bootloader <name of firefirefire image here>
fastboot -i 0x1949 flash recovery <name of recovery image here>
"
the terminal returns something like "Could not get PIPE properties" and it stucks here. And later, I typed ctrl+c to stop the command and "fastboot oem idme bootmode 5002
fastboot reboot"
Then the screen is black and blank. I do not know what to do. I have tried fastboot but always get "< waiting for device >". Even I hit the power button for 1 minutes, the light is not on and the screen is still black. But it seems that the battery is stll a little bit hot, which may indicate that it is using the battery. What should I do now?
You could just keep holding the power button down for a long time maybe you will get it to boot but otherwise I believe you need a factory cable. http://forum.xda-developers.com/showthread.php?t=1550999
Thanks for your reply!
Thepooch said:
You could just keep holding the power button down for a long time maybe you will get it to boot but otherwise I believe you need a factory cable. http://forum.xda-developers.com/showthread.php?t=1550999
Click to expand...
Click to collapse
Thank you so much! I ordered a factory cable and it is on the way. No matter how long I push the power button, nothing happens, no power light, no backlight....When I charge it, the charger get hot, which may indicate it is being charged. Can a factory cable save it? I guess I may flash the wrong bootloader. I should unzip the u-boot-firefirefire-1.2.zip file and then flash it. But I flash it directly without unzipping. Such a silly mistake!
You don't unzip it just flash it in recovery but look at this post too http://forum.xda-developers.com/showthread.php?t=1392693 there is a new bootloader here http://forum.xda-developers.com/showthread.php?t=1632375 follow the instructions you most likely corrupted the bootloader partition flashing a new one will fix that but you need to get to a state where you can until then your in limbo with a draining battery factory cable is maybe your only rescue. I'm not familiar with Mac so I can't really help ya there http://forum.xda-developers.com/showthread.php?t=1430038 good luck
Thepooch said:
You don't unzip it just flash it in recovery but look at this post too http://forum.xda-developers.com/showthread.php?t=1392693 there is a new bootloader here http://forum.xda-developers.com/showthread.php?t=1632375 follow the instructions you most likely corrupted the bootloader partition flashing a new one will fix that but you need to get to a state where you can until then your in limbo with a draining battery factory cable is maybe your only rescue. I'm not familiar with Mac so I can't really help ya there http://forum.xda-developers.com/showthread.php?t=1430038 good luck
Click to expand...
Click to collapse
I use the command "fastboot -i 0x1949 flash bootloader <name of firefirefire image here>". Does the "<name of firefirefire image here>" is like "u-boot-firefirefire-1.2.zip" or "u-boot.bin"? Sorry, but I am quite confused.
g0og1e said:
I use the command "fastboot -i 0x1949 flash bootloader <name of firefirefire image here>". Does the "<name of firefirefire image here>" is like "u-boot-firefirefire-1.2.zip" or "u-boot.bin"? Sorry, but I am quite confused.
Click to expand...
Click to collapse
When flash with fastboot you need to flash the u-boot.bin file
The zip file is for flashing by TWRP
they are used for two different method.
Problem Solved!
Problem solved here and I posted here.
Bricked Kindle Fire HD 7
Hi, so i bricked my kindle fire hd completely. i got a factory cable it it shows as fastboot kindle fire on the screen. But when i run the kfhd recovery tool, and try to restore it, all it says on the command prompt is, waiting for device. Help please!!
hii
wj3pic said:
Hi, so i bricked my kindle fire hd completely. i got a factory cable it it shows as fastboot kindle fire on the screen. But when i run the kfhd recovery tool, and try to restore it, all it says on the command prompt is, waiting for device. Help please!!
Click to expand...
Click to collapse
........
same problem , no solution l feel unlucky...
Hi everyone, I have two kindle fire, I messed with both of them.
I've root them the first one has the problem with the yellow triangle logo stucked. And the other one I've tried to reset it to the factory settings and everything was cool until I hit the TWRP utility and I think I erased everything.
I've see tons of posts regarding rooting and troubleshooting related to rooting and i'm pretty sick of rooting, I think that 3 months is sufficient time, please DON'T POST anything related to rooting.
I'm here asking if anyone knows how to flash all the data ofthe kindle from the pc and been able to install the factory software, firmware (I don't know) from scratch from my pc. Anyone, please?
The first one is probably stuck in fastboot. Try giving it a go with "fastboot oem idme bootmode 4000 && fastboot reboot".
For the second one, "I think I erased everything" is as descriptive as not wanting people to post about your procedure is helpful. What exactly is going on with it? For future reference: http://forum.xda-developers.com/showthread.php?t=1644970
You should also update both FFF and TWRP on both devices once they are working normally.
If i may suggest flashing modaco first after a good wipe everything except your sdcard I believe this will make a smoother transition if you desire to return to stock before returning to stock always do a good wioe to remove remnants of previous roms download the latest stock bin and rename it to update.zip do not place it in any folder just at the root of your sdcard flash in twrp this will also wipe out twrp and fff I really dont recommend doing this lots of people fail at doing the procedure correcty modaco is stock with only the market added try this approach first then you can retain fff and twrp for custom backups.
Ok, so, I've been investigating and what I'm really looking is to erase ABSOLUTELY everything from the kindle sdcard, system, etc, everything. And I'm looking for a method to sideload from the pc the orginal stock ROM of Kindle Fire. Any clues, directions? Any fully functional software?
I really, don't want to try the adb commands (I've tried them before), nor follow any tutorial about root troubleshooting.
I'm really sick of them and of all that mal-functioning software that you have to download(Eg. Not-responding superOneClick, kindleFireUnbrickUtility saying in one line <No device found> <Processing something> <Congrats, your kindle is good to go! (When it's not)>, Eternal loading Android Commander)
With all due respect I DON'T want any more of those, as I said, 3 months is sufficient time, I feel so frustrated.
jRam90 said:
Ok, so, I've been investigating and what I'm really looking is to erase ABSOLUTELY everything from the kindle sdcard, system, etc, everything. And I'm looking for a method to sideload from the pc the orginal stock ROM of Kindle Fire. Any clues, directions? Any fully functional software?
I really, don't want to try the adb commands (I've tried them before), nor follow any tutorial about root troubleshooting.
I'm really sick of them and of all that mal-functioning software that you have to download(Eg. Not-responding superOneClick, kindleFireUnbrickUtility saying in one line <No device found> <Processing something> <Congrats, your kindle is good to go! (When it's not)>, Eternal loading Android Commander)
With all due respect I DON'T want any more of those, as I said, 3 months is sufficient time, I feel so frustrated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=25730666&postcount=2
Read from "Reverting to stock software". You can manually rename the file and then copy it into the KF instead of using ADB for it, just make sure the extension is .zip and not .zip.bin (Windows hides extensions per default settings).
jRam90 said:
Ok, so, I've been investigating and what I'm really looking is to erase ABSOLUTELY everything from the kindle sdcard, system, etc, everything. And I'm looking for a method to sideload from the pc the orginal stock ROM of Kindle Fire. Any clues, directions? Any fully functional software?
Click to expand...
Click to collapse
To restore back to full factory
1. Download Kindle Fire Software Update Version 6.3.1
2. Rename the file to update.zip
3. Get in to TWRP and mount USB drive
4. Copy update.zip to Kindle Fire
5. Unmount USB drive
6. Do factory reset, then wipe system cache, and dalvik cache
7. Flash the update.zip
8. Let it bootloop about 3 times or so...
If you want FFF and TWRP then flash Stock 6.3.1 Basic from TWRP. This has no root or gapps.
Dasanko said:
http://forum.xda-developers.com/showpost.php?p=25730666&postcount=2
Read from "Reverting to stock software". You can manually rename the file and then copy it into the KF instead of using ADB for it, just make sure the extension is .zip and not .zip.bin (Windows hides extensions per default settings).
Click to expand...
Click to collapse
When trying to execute the adb shell commands all I get is:
- exec 'system/bin/sh' failed: No such file or directory (2) -
I've also tried, fastboot update | flash | boot | flash:raw
This is with one kindle, with the other one, I can't even get the PC to recognized it as a USB
Is there any tool, that really erases everything and take the stock ROM to be installed again? Software, script?
jRam90 said:
When trying to execute the adb shell commands all I get is:
- exec 'system/bin/sh' failed: No such file or directory (2) -
I've also tried, fastboot update | flash | boot | flash:raw
This is with one kindle, with the other one, I can't even get the PC to recognized it as a USB
Is there any tool, that really erases everything and take the stock ROM to be installed again? Software, script?
Click to expand...
Click to collapse
Ahh, that's a bother. It's a pretty annoying error. Could be something messed with your TWRP (I'm assuming you tried the commands from there).
There isn't one, but there's really no need for it... you just rename the ROM to update.zip, wipe cache, dalvik-cache and factory reset, and install update.zip. If you just want to flash stock because you like it better for whatever reason, you could also just look at the MoDaCo custom ROM instead, as it is stock based.
As for the other KF... you can't get it recognized, from where? The ROM? TWRP? Fastboot?
Dasanko said:
Ahh, that's a bother. It's a pretty annoying error. Could be something messed with your TWRP (I'm assuming you tried the commands from there).
There isn't one, but there's really no need for it... you just rename the ROM to update.zip, wipe cache, dalvik-cache and factory reset, and install update.zip. If you just want to flash stock because you like it better for whatever reason, you could also just look at the MoDaCo custom ROM instead, as it is stock based.
As for the other KF... you can't get it recognized, from where? The ROM? TWRP? Fastboot?
Click to expand...
Click to collapse
Both of the kindles, are damaged. I can't access them. I just can access one by USB.
For future reference:
This user's issues have been partially dealt with.
The first KF will require a factory cable to be fixed.
The second KF was soft bricked (there were a few corrupt partitions) after a bad flash attempt of the stock ROM. Luckily, FFF was still installed, but the Windows fastboot drivers weren't. Reinstalled FFF+TWRP from Firekit, and then fixed the partitions, wiped and flashed the stock ROM.
Dasanko said:
For future reference:
This user's issues have been partially dealt with.
The first KF will require a factory cable to be fixed.
The second KF was soft bricked (there were a few corrupt partitions) after a bad flash attempt of the stock ROM. Luckily, FFF was still installed, but the Windows fastboot drivers weren't. Reinstalled FFF+TWRP from Firekit, and then fixed the partitions, wiped and flashed the stock ROM.
Click to expand...
Click to collapse
Thanks a LOT, Dasanko !!!!
jRam90 said:
Thanks a LOT, Dasanko !!!!
Click to expand...
Click to collapse
Ok, So, I have the factory cable. How can I test its Ok?
I have another question, the kindle is pratically empty no system, no sdcard memory, probably corrupted ¿How do I use the factory cable, to format the Kindle and install the Stock ROM again?
With the KF off and unplugged, type "fastboot getvar product" on a shell (KFU/tools).
Then plug in the KF using the factory cable. If you get anything listed or returned, it should be working fine. Otherwise, if you wait a few seconds and still nothing, you'll have to check the drivers to make sure the correct fastboot ones are installed.
To check the partitions, you can just "fastboot boot twrp.img" to load a TWRP into memory, and then "adb shell parted /dev/block/mmcblk0 p" to print all partitions' information.
Dasanko said:
With the KF off and unplugged, type "fastboot getvar product" on a shell (KFU/tools).
Then plug in the KF using the factory cable. If you get anything listed or returned, it should be working fine. Otherwise, if you wait a few seconds and still nothing, you'll have to check the drivers to make sure the correct fastboot ones are installed.
To check the partitions, you can just "fastboot boot twrp.img" to load a TWRP into memory, and then "adb shell parted /dev/block/mmcblk0 p" to print all partitions' information.
Click to expand...
Click to collapse
Well, I'm at my job now. So I will try this at home, but the shell is not working since system/sh (shell) it's not in the Kindle. I was trying to boot it yesterday with "fastboot boot twrp.img" and nothing. I also tried: "fastboot getvar product" and nothing but I only used the console. Anyway, let's see what happens...
Quick question, I've read that the factory cable puts the Kindle straight into bootmode, ¿So the color of the power button, has something to do with it? ¿I mean how do I know the kindle has entered factory mode? ¿The orange light is an indicator? (With a standard USB Cable I only get the green light with the power button, with the factory cable I first get green light, then orange light)
I've also read that if I can see the Kindle fire logo, the bootloader is Ok. Hence my Kindle is OK, but I can't enter fastboot mode. ¿Can anyone confirm this?
It'll get stuck in the bootloader screen, and fastboot commands should work as well, provided the drivers are properly installed and working.
Dasanko said:
It'll get stuck in the bootloader screen, and fastboot commands should work as well, provided the drivers are properly installed and working.
Click to expand...
Click to collapse
OK, I've finally made myself a working factory cable. And in the device manger I can see the kindle listed as "Android phone" and in that root it says "Android ADB Interface". Look like drivers are not working. Where can I download them?
Those are the proper drivers for fastboot you should be able to use kfu to send twrp and fff to the device if that doesn't work you will need to fastboot flash them
All I get is < waiting for device>. Looks like the drivers are not installed.
Simply hold the power button down while connected when it says waiting then power it back on and it should send also try unplug replug when it says waiting
---------- Post added at 03:49 PM ---------- Previous post was at 03:44 PM ----------
If you would like some help I have some time before work but you must finish your thread for the benefit of others
My Kindle was rooted but I decided to try my hand at installing a custom ROM. However, the ROM I tried would not work and the screen stayed black. However, thanks to TWRP I could install Kindle from Amazon again. The installation went thru smoothly, or so I thought. Now, when I boot the Kindle, I see the Kindle Fire Logo and it stays there. The Computer can see the Kindle as an Android device, Android Composite Device. But Kindle Fire Utility cannot see it so I could try and re-install it again. Any suggestions?
Lacking information, so I'll just fill the voids with assumptions.
I *assume* you didn't wipe cache, dalvik-cache and most important when switching from a ROM to another, Factory Reset - this is the reason said custom ROM wouldn't work, and the reason flashing back update.zip (as you said you installed it, rather than restoring a backup) caused your KF to get stuck in a semi brick.
The most important question here is, do you have FFF installed?
If you do, fixing this is trivial. Just get into TWRP from FFF, wipe cache, dalvik-cache and factory reset and then install whatever ROM you'd like to try or use.
If you don't have FFF installed, then your solutions are to either get a factory cable (recommended) or to crack open the case and do the USB pin short trick. From there you can use fastboot to install FFF and boot into TWRP.
Alternatively, you can try "fastboot getvar product" or "adb shell idme bootmode 5001" to see if you get lucky.
Dasanko said:
Lacking information, so I'll just fill the voids with assumptions.
I *assume* you didn't wipe cache, dalvik-cache and most important when switching from a ROM to another, Factory Reset - this is the reason said custom ROM wouldn't work, and the reason flashing back update.zip (as you said you installed it, rather than restoring a backup) caused your KF to get stuck in a semi brick.
The most important question here is, do you have FFF installed?
If you do, fixing this is trivial. Just get into TWRP from FFF, wipe cache, dalvik-cache and factory reset and then install whatever ROM you'd like to try or use.
If you don't have FFF installed, then your solutions are to either get a factory cable (recommended) or to crack open the case and do the USB pin short trick. From there you can use fastboot to install FFF and boot into TWRP.
Alternatively, you can try "fastboot getvar product" or "adb shell idme bootmode 5001" to see if you get lucky.
Click to expand...
Click to collapse
I tried the USB pin short trick but now my Kindle won't turn on at all nor will it charge. Thanks anyways!
i have similar problem ......please need help
After successfully rooting kf with kfu and making a backup ... I did factory reset and flashed a custom rom ... now kindle is stuck on " kindle fire" logo and just keeps flashing and rebooting . My computer recognizes it as android phone ( android adb ) and kfu does too but only for a couple of seconds . During those few seconds I try recovery ... fast boot ...normal boot... n none seem to work . Kf just reboots n returns to boot loop . Any advice is appreciated .. thanks
Start a new thread when you're posting your own issues.
What colour is the "kindle fire" logo when you turn on your KF?
Force Kindle into Fastboot
Ok, so I have finally got my Kindle to turn on, using the USB Short Trick. Now my only question is about getting the Kindle to boot into fastboot mode so I can re-format the sdcard partition and finally load a new ROM. I have tried several different commands and they all seem to miss the window of opportunity to start the kindle in fastboot mode. Is there any way, short of a factory cable, that one can make the kindle start in fastboot mode?
Not fastboot get var
ComputerGenuis2.0 said:
Ok, so I have finally got my Kindle to turn on, using the USB Short Trick. Now my only question is about getting the Kindle to boot into fastboot mode so I can re-format the sdcard partition and finally load a new ROM. I have tried several different commands and they all seem to miss the window of opportunity to start the kindle in fastboot mode. Is there any way, short of a factory cable, that one can make the kindle start in fastboot mode?
Click to expand...
Click to collapse
fastboot getvar product doesn't seem to do the trick. The kindle seems to be in fastboot mode but the adb shell cannot access the device.
The problem is that you don't have the fastboot drivers installed (also, ADB will not work while fastboot is active) - Windows is painfully slow at detecting a device and installing its drivers, so by the time it even notices anything, the fastboot window is already over.
To solve this, use firekit: http://forum.xda-developers.com/showthread.php?t=1430038
The script that will probably suit your needs the most is usb_install_fff_twrp.
Used Firekit
Dasanko said:
The problem is that you don't have the fastboot drivers installed (also, ADB will not work while fastboot is active) - Windows is painfully slow at detecting a device and installing its drivers, so by the time it even notices anything, the fastboot window is already over.
To solve this, use firekit: http://forum.xda-developers.com/showthread.php?t=1430038
The script that will probably suit your needs the most is usb_install_fff_twrp.
Click to expand...
Click to collapse
I have TWRP and FFF installed. However, upon booting into TWRP, the sdcard partition cannot be mounted, to the Kindle that is, and as such, I cannot mount the sdcard to the computer. When I researched this some more, I found that I can fix this by using a command via adb shell. The guide instructed using fastboot to achieve this. When would be the best time to use adb shell?
What's the output of partitions.txt? (type the following from TWRP)
adb shell parted /dev/block/mmcblk0 p > partitions.txt
Can't use adb
Dasanko said:
What's the output of partitions.txt? (type the following from TWRP)
adb shell parted /dev/block/mmcblk0 p > partitions.txt
Click to expand...
Click to collapse
The problem at hand is using adb. I can never time it exactly right to open adb. I always get an "error: device not found". Windows even recognizes that Android ADB Interface is plugged in.
Okay, things are getting awfully confusing here.
What exactly is it that you can do and that you cannot do?
For example, are FFF and TWRP functional?
GOT IT!
Thank you! I finally figured out that the wrong driver had reinstalled and that was causing my computer to not be able to use adb shell. I fixed that and voila, I am now running CM9. Thanks again!
Recently tried to reset Kindle Fire back to stock from an ICS rom. I installed the Amazon update.zip file and it rebooted back into the original Kindle flash screen, but when I go to unlock it, I get a warning saying " The application Calendar Storage (process com.android.providers.calendar) has stopped unexpectedly. Please try again." and "The process android.process.acore has stopped unexpectedly. Please try again." Any ideas? Any help would be greatly appreciated!
You have to wipe system and factory reset when reverting to stock.
"That's a special kind of stupid. The kind that makes me laugh."
soupmagnet said:
You have to wipe system and factory reset when reverting to stock.
"That's a special kind of stupid. The kind that makes me laugh."[/QUOTE
What can I do to fix this? If anything?
Click to expand...
Click to collapse
davidnelson316 said:
What can I do to fix this? If anything?
Click to expand...
Click to collapse
Wipe everything. You don't need to wipe your SD card.
You can still access TWRP, right? You could always push through ADB if you can't access TWRP.
How do I push through with adb? I can't access twrp.
Sent from my SCH-I535 using xda app-developers app
davidnelson316 said:
How do I push through with adb?
Click to expand...
Click to collapse
When you plug in your kindle to your computer, does the computer still recognize the device? And/or does KFU register the device as online when it is plugged in?
Do you still have access to the shell?
Code:
adb shell
If you receive an error like "exec- /system/bin/sh: not found...", you need to get a factory cable before you can continue any further. If your prompt changes from '$' to '#' then you have access to the shell and you can use it to install FFF and TWRP.
You could use fastboot to install FFF and TWRP, but considering you don't really know whether or not your computer will be able to detect the device in fastboot mode, it's best to use the adb shell for now.
In the case that you do have access to the shell, you'll need to find and download TWRP 2.2.x. TWRP should be in a '.img' format. Rename the TWRP "open-recovery.x.x.x.img" file to twrp.img for simplicity.
Use adb to push twrp to your sdcard:
Code:
adb push /your/local/path/to/twrp.img /sdcard/twrp.img
When finished:
Code:
adb shell
dd if=/sdcard/twrp.img of=/dev/block/mmcblk0p5
idme bootmode 5001
reboot
Be very careful of typos. Entering the wrong partition number can wreck your device.
Once in recovery, wipe system and factory reset, then install the ROM of your choice (it should still be on your sdcard). Whether or not you wipe dalvik cache is inconsequential.
Flash FFF1.4a.zip in recovery to install FFF.
This happened to me. I just rooted from kfu while booting, and mounted, copied the stock rom, wiped everything (exept eternal), and installed.
hi all
I have a problem on getting TWRP to work properly.
I initially used BreakDroid to install TWRP, everything worked fine.
I tried to install the cm-11-20140512.1655-SKANKY-otter.zip OS but I first got the "error 7", fixed that, and then it was stuck at "updating package" (or similar)....
then I saw an updated version of TWRP, without realizing that it was for an asys TF101 tablet (http://forum.xda-developers.com/showthread.php?t=2434422)...I installed that and now twrp doesn't work because the screen is the wrong size and I can't get to various buttons including flash/wipe etc..
I can still mount it tho so I thought about using adb/flashboot...but I can't seem to override that version of TWRP.
...best part...i cannot restore the original amazon OS since I didn't do a backup (...i know...:angel
does anyone have any idea about how I can fix that and install a kitkat rom?
I have nandroid backup of stock in my list.
sd_shadow's collection of links for: Kindle Fire 1
Sent from my Amazon Kindle Fire using Tapatalk
sd_shadow said:
I have nandroid backup of stock in my list.
Click to expand...
Click to collapse
thanks for the reply.
I did look at it but my problem is that I don't need to backup the system, I need to be able to install a recovery tool (twrp or cwmr) that will allow me to flash a rom on my kindle.
my problem now is that I can't seem to be able to do that since the recovery I have is for a different tablet and the screen won't allow me to get to the right buttons...I can only turn the kindle on and off .
SbDROID2012 said:
thanks for the reply.
I did look at it but my problem is that I don't need to backup the system, I need to be able to install a recovery tool (twrp or cwmr) that will allow me to flash a rom on my kindle.
my problem now is that I can't seem to be able to do that since the recovery I have is for a different tablet and the screen won't allow me to get to the right buttons...I can only turn the kindle on and off .
Click to expand...
Click to collapse
you tried
with kindle fire in twrp, connected to mac
adb shell
su
idme bootmode 4002
reboot
# back in your PC shell
fastboot -i 0x1949 flash recovery openrecovery-twrp-2.6.3.1-otter.img
fastboot reboot
I don't have a mac, so commands might not be quite right
may want to read [GUIDE] Set up ADB and Fastboot on a Mac easily
and you will need openrecovery-twrp-2.6.3.1-otter.img
sd_shadow said:
you tried
with kindle fire in twrp, connected to mac
adb shell
su
idme bootmode 4002
reboot
# back in your PC shell
fastboot -i 0x1949 flash recovery openrecovery-twrp-2.6.3.1-otter.img
fastboot reboot
I don't have a mac, so commands might not be quite right
may want to read [GUIDE] Set up ADB and Fastboot on a Mac easily
and you will need openrecovery-twrp-2.6.3.1-otter.img
Click to expand...
Click to collapse
I did try to do that but
1)
adb shell
Click to expand...
Click to collapse
--> doesn't work and I get "error: device not found"
i did the "./android update adb" with "adb kill-server" and "adb start-server" but nothing changed..
2) I installed the img file anyway through
fastboot flash recovery
Click to expand...
Click to collapse
the img file but i still cannot get the twrp with the view for kindle...see attached image. i have NO ACCESS to some of the buttons, therefore I can't do much with it.
I would REALLY like to be able to install a CWM...i tried the one here http://forum.xda-developers.com/showthread.php?t=1454241 using
fastboot flash recovery cwm-file-here.img
Click to expand...
Click to collapse
but it gets to the boot page, I select "recovery" and then it's stuck with the kindle logo and the small "booting..." at the bottom of the screen...so I re-installed twrp even tho i still have that damn "build for Asus TF101 Series Tablets" (see attachment) warning on top!!
any help would be HUGELY appreciated!!
also, using "adb devices" I still can't see it.
Run this command from your computer with your kindle connected when you turn it on:
fastboot getvar product
The FFF bootloader temporarily enables fastboot as the device boots up. When you issue this command, it puts the device into permanent fastboot mode. Just flash the correct recovery after that:
fastboot -i 0x1949 flash recovery your-recovery.img
fastboot reboot
Duchman said:
Run this command from your computer with your kindle connected when you turn it on:
fastboot getvar product
The FFF bootloader temporarily enables fastboot as the device boots up. When you issue this command, it puts the device into permanent fastboot mode. Just flash the correct recovery after that:
fastboot -i 0x1949 flash recovery your-recovery.img
fastboot reboot
Click to expand...
Click to collapse
ok...that doesn't work...
I get the same problem, if I download the correct twrp from here http://teamw.in/project/twrp2/79 I get exactly the same screenshot I posted above..
and the cwm recovery is not available anymore so I don't really know how to fix this...without working recovery I can't install any rom!!
SbDROID2012 said:
ok...that doesn't work...
I get the same problem, if I download the correct twrp from here http://teamw.in/project/twrp2/79 I get exactly the same screenshot I posted above..
and the cwm recovery is not available anymore so I don't really know how to fix this...without working recovery I can't install any rom!!
Click to expand...
Click to collapse
When you are flashing TWRP image in bootloader/fastboot do you see sending ... writing... in command prompt?
like this?
sd_shadow said:
When you are flashing TWRP image in bootloader/fastboot do you see sending ... writing... in command prompt?
like this?
Click to expand...
Click to collapse
When I launch the fastboot flash in fastboot mode I do get nothing but the blank cursor on a new line, although I see the device with "fastboot devices". After a few min that was stuck then I turned it off and the first part came up saying " sending file" but then it gave me an error saying that the connection was lost...which makes sense cause i turned it off..
If instead I launch the command and THEN turn the kindle on it does show me the correct output in a couple of secs as your showed. But then even if I do fastboot reboot, it does reboot it but no correct recovery is loaded...still the wrong screen size... Very very frustrating...
And btw...thanks for bearing with me through this!!!
---edit---
Now that I think about it...the twrp screen, although the wring size, actually reflects the VERSION of twrp that I'm installing through fastboot...it's as if the twrp I got from here ( http://forum.xda-developers.com/showthread.php?t=2434422) controls the size of the screen while I'm able to change the version of twrp...I think that that is a recovery GUI for the Asus tablet, any idea if I can install another GUI?...hopefully this helps...
SbDROID2012 said:
When I launch the fastboot flash in fastboot mode I do get nothing but the blank cursor on a new line, although I see the device with "fastboot devices". After a few min that was stuck then I turned it off and the first part came up saying " sending file" but then it gave me an error saying that the connection was lost...which makes sense cause i turned it off..
If instead I launch the command and THEN turn the kindle on it does show me the correct output in a couple of secs as your showed. But then even if I do fastboot reboot, it does reboot it but no correct recovery is loaded...still the wrong screen size... Very very frustrating...
And btw...thanks for bearing with me through this!!!
---edit---
Now that I think about it...the twrp screen, although the wring size, actually reflects the VERSION of twrp that I'm installing through fastboot...it's as if the twrp I got from here ( http://forum.xda-developers.com/showthread.php?t=2434422) controls the size of the screen while I'm able to change the version of twrp...I think that that is a recovery GUI for the Asus tablet, any idea if I can install another GUI?...hopefully this helps...
Click to expand...
Click to collapse
Your guess is right, installing another TWRP version doesn't affect the theme you are using, unless it has a theme of its own. You could delete the ui.zip from the TWRP folder and that would solve it. The folder should be in sdcard.
Duchman said:
Your guess is right, installing another TWRP version doesn't affect the theme you are using, unless it has a theme of its own. You could delete the ui.zip from the TWRP folder and that would solve it. The folder should be in sdcard.
Click to expand...
Click to collapse
so..the problem with that is that I could not access the sdcard since adb doesn't work...however...as of now I've been able to fix the layout problem by using
fastboot -w
fastboot flash recovery twrp.2.7.0.1.img
fastboot reboot
Click to expand...
Click to collapse
once rebooting I had to re-wipe (advance wipe) sdcard/cache/data since when I tried to mount them I could not check the boxes.
now i STILL cannot mount it and adb does not recognize it.
I'm using mac and I tried
android update adb
Click to expand...
Click to collapse
but still adb can't see the kindle and I can't mount it through twrp
...however, I'm still able to reboot in bootloader and use fastboot
I don't think I can flash a .zip rom from fastboot tho...and I'm not sure how to transfer files on the kindle to flash them from twrp...any idea?
thanks a ton!!
-- edit --
i already modified the ~/.android/adb_usb.ini file adding 0×1949 and then running
adb kill-server
adb devices
but what I get is just
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
and nothing to it...the "adb shell" still gives me "device not found"!!
try flashing Cannibal Open Touch Recovery see http://forum.xda-developers.com/showthread.php?t=2025793
links are bad so uploaded my copy to http://d-h.st/XWy
sd_shadow said:
try flashing Cannibal Open Touch Recovery see http://forum.xda-developers.com/showthread.php?t=2025793
links are bad so uploaded my copy to http://d-h.st/XWy
Click to expand...
Click to collapse
SCORE !!!
dunno why twrp was the problem! the new recovery that you linked worked like magic, adb worked perfectly, I already flashed a rom and it works!!
so...why wouldn't twrp allow me to use adb or mount disks through usb?!
thanks so much for the help!!
Guessing it doesn't use the twrp theme, that was causing trouble.
Sent from my Amazon OtterX using Tapatalk