Galaxy Y Duos S6102 Dial a number with a specific card - Galaxy Y GT-S5360 Accessories

Hi!
I have Galaxy Y Duos S6102 and need help doing two different things.
It's possible to call a number using a specific card using for example a phone number prefix??
I'm also trying to connect S6102 as modem on my mac. It always refuse to connect, the network settings are correct (I tried with both SIM network settings). I can't use it as modem.
Thu Aug 9 14:56:15 2012 : Apple Base Script.ccl Version 3.3
Thu Aug 9 14:56:15 2012 : CCLWrite : AT\13
Thu Aug 9 14:56:15 2012 : CCLMatched : OK\13\10
Thu Aug 9 14:56:15 2012 : Initializing device: AT&FE0Q0V1
Thu Aug 9 14:56:15 2012 : CCLWrite : AT&FE0Q0V1\13
Thu Aug 9 14:56:15 2012 : CCLMatched : OK\13\10
Thu Aug 9 14:56:15 2012 : Initializing PDP context: AT+CGDCONT=1,"IP","internet.vodafone.pt"
Thu Aug 9 14:56:15 2012 : CCLWrite : AT+CGDCONT=1,"IP","internet.vodafone.pt"\13
Thu Aug 9 14:56:15 2012 : CCLMatched : OK\13\10
Thu Aug 9 14:56:15 2012 : Dialing: ATD*99***1#
Thu Aug 9 14:56:15 2012 : CCLWrite : ATD*99***1#\13
Thu Aug 9 14:56:15 2012 : Waiting for connection
Thu Aug 9 14:56:15 2012 : CCLMatched : CONNECT
Thu Aug 9 14:56:15 2012 : CCLMatched : 7200
Thu Aug 9 14:56:15 2012 : Communicating at 7200 bps.
Thu Aug 9 14:56:15 2012 : Connection established
Thu Aug 9 14:56:18 2012 : CCLExit: 0
Thu Aug 9 14:56:18 2012 : Serial connection established.
Thu Aug 9 14:56:18 2012 : using link 1
Thu Aug 9 14:56:18 2012 : Using interface ppp1
Thu Aug 9 14:56:18 2012 : Connect: ppp1 <--> /dev/cu.usbmodemfa132
Thu Aug 9 14:56:19 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:22 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:25 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:28 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:31 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:34 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:37 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:40 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:43 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:46 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:49 2012 : LCP: timeout sending Config-Requests
Thu Aug 9 14:56:49 2012 : Connection terminated.
Thu Aug 9 14:56:49 2012 : CCLWrite : +++
Thu Aug 9 14:56:58 2012 : CCLWrite : ATH\13
Thu Aug 9 14:56:58 2012 : CCLMatched : ERROR\13\10
Thu Aug 9 14:56:59 2012 : CCLWrite : AT&F\13
Thu Aug 9 14:56:59 2012 : CCLMatched : OK\13\10
Thu Aug 9 14:56:59 2012 : CCLExit: 0
Thu Aug 9 14:56:59 2012 : Serial link disconnected.

fteixeiras said:
Hi!
I have Galaxy Y Duos S6102 and need help doing two different things.
It's possible to call a number using a specific card using for example a phone number prefix??
I'm also trying to connect S6102 as modem on my mac. It always refuse to connect, the network settings are correct (I tried with both SIM network settings). I can't use it as modem.
Thu Aug 9 14:56:15 2012 : Apple Base Script.ccl Version 3.3
Thu Aug 9 14:56:15 2012 : CCLWrite : AT\13
Thu Aug 9 14:56:15 2012 : CCLMatched : OK\13\10
Thu Aug 9 14:56:15 2012 : Initializing device: AT&FE0Q0V1
Thu Aug 9 14:56:15 2012 : CCLWrite : AT&FE0Q0V1\13
Thu Aug 9 14:56:15 2012 : CCLMatched : OK\13\10
Thu Aug 9 14:56:15 2012 : Initializing PDP context: AT+CGDCONT=1,"IP","internet.vodafone.pt"
Thu Aug 9 14:56:15 2012 : CCLWrite : AT+CGDCONT=1,"IP","internet.vodafone.pt"\13
Thu Aug 9 14:56:15 2012 : CCLMatched : OK\13\10
Thu Aug 9 14:56:15 2012 : Dialing: ATD*99***1#
Thu Aug 9 14:56:15 2012 : CCLWrite : ATD*99***1#\13
Thu Aug 9 14:56:15 2012 : Waiting for connection
Thu Aug 9 14:56:15 2012 : CCLMatched : CONNECT
Thu Aug 9 14:56:15 2012 : CCLMatched : 7200
Thu Aug 9 14:56:15 2012 : Communicating at 7200 bps.
Thu Aug 9 14:56:15 2012 : Connection established
Thu Aug 9 14:56:18 2012 : CCLExit: 0
Thu Aug 9 14:56:18 2012 : Serial connection established.
Thu Aug 9 14:56:18 2012 : using link 1
Thu Aug 9 14:56:18 2012 : Using interface ppp1
Thu Aug 9 14:56:18 2012 : Connect: ppp1 <--> /dev/cu.usbmodemfa132
Thu Aug 9 14:56:19 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:22 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:25 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:28 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:31 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:34 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:37 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:40 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:43 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:46 2012 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x145638b1> <pcomp> <accomp>]
Thu Aug 9 14:56:49 2012 : LCP: timeout sending Config-Requests
Thu Aug 9 14:56:49 2012 : Connection terminated.
Thu Aug 9 14:56:49 2012 : CCLWrite : +++
Thu Aug 9 14:56:58 2012 : CCLWrite : ATH\13
Thu Aug 9 14:56:58 2012 : CCLMatched : ERROR\13\10
Thu Aug 9 14:56:59 2012 : CCLWrite : AT&F\13
Thu Aug 9 14:56:59 2012 : CCLMatched : OK\13\10
Thu Aug 9 14:56:59 2012 : CCLExit: 0
Thu Aug 9 14:56:59 2012 : Serial link disconnected.
Click to expand...
Click to collapse
Enable use hotspot !!

Hmm...

Related

[Q] Question

Hello
can I use the sweep2wake feature on my hTC One X based on these info ?
if NOT, How I Can enjoying this tweak ?
Android Version: 4.1.1
Kernel Version: 2.6.39.4-cyanogenmod
[email protected] #1
Wed Nov 21 23:47:37 PST 2012
CyanogenMod Version: 10-20120919-NIGHTLY-endeavoru
Build Date: Wed Sep 19 02:36:43 PDT 2012

[Q] Please Please Please Please Please

is this Kernel compatible with my HOX international ?
http://forum.xda-developers.com/showthread.php?t=1873615
this is my 1X >>>
Android Version: 4.1.1
Kernel Version: 2.6.39.4-cyanogenmod
[email protected] #1
Wed Nov 21 23:47:37 PST 2012
CyanogenMod Version: 10-20120919-NIGHTLY-endeavoru
Build Date: Wed Sep 19 02:36:43 PDT 2012
It should, but try to repack it first.
Follow this link, http://forum.xda-developers.com/showthread.php?t=1815607

[Q] note2 imei problem ? how i find before or after update ? my log here

This is efs folder log file
Sun Jan 1 00:02:01 2012: nv data does not exist
Sun Jan 1 00:02:01 2012: default NV restored
Sun Jan 1 00:02:09 2012: OFFSET_FOR_PRESET2 writing input
Sun Jan 1 00:02:10 2012: 2nd NV built
Sun Jan 1 00:02:10 2012: NV data back-uped
Sun Jan 1 00:09:38 2012: check off
Sun Jan 1 00:00:04 2012: check off
Sun Jan 1 00:02:32 2012: 2nd NV built
Sun Jan 1 00:02:32 2012: NV data back-uped
Sun Jan 1 00:02:32 2012: check on
Sun Jan 1 00:00:34 2012: check off
Sat Sep 22 17:22:12 2012: check off
Sat Sep 22 09:23:16 2012: 2nd NV built
Sat Sep 22 09:23:16 2012: NV data back-uped
Sat Sep 22 09:23:16 2012: check on
Sat Sep 22 09:27:23 2012: check off
Sat Sep 22 09:27:46 2012: 2nd NV built
Sat Sep 22 09:27:46 2012: NV data back-uped
Sat Sep 22 09:27:46 2012: check on
Sat Sep 22 09:37:20 2012: fail - no checksum info
Sat Sep 22 09:37:20 2012: NV restored
Sat Sep 22 09:38:04 2012: OFFSET_FOR_PRESET1 writing input
Sat Sep 22 09:38:04 2012: 2nd NV built
Sat Sep 22 09:38:04 2012: NV data back-uped
Sat Sep 22 09:38:11 2012: OFFSET_FOR_PRESET2 writing input
Sat Sep 22 09:38:11 2012: 2nd NV built
Sat Sep 22 09:38:11 2012: NV data back-uped
Sat Sep 22 09:38:14 2012: OFFSET_FOR_PRESET2 writing input
Sat Sep 22 09:38:14 2012: 2nd NV built
Sat Sep 22 09:38:14 2012: NV data back-uped
Mon Aug 5 17:23:22 2013: input from cp
Mon Aug 5 17:23:22 2013: 2nd NV built
Mon Aug 5 17:23:23 2013: NV data back-uped
Fri Aug 30 19:41:01 2013: OFFSET_FOR_PRESET2 writing input
Fri Aug 30 19:41:01 2013: 2nd NV built
Fri Aug 30 19:41:01 2013: NV data back-uped
Hi,
I bought note 2 on ebay 2 Dec. 2013. before insert my sim card I decide to make an update with Kies...
After update imei was 0049..
I know my bad.. I had to check before update... but I do not know now is that note2 already broken or I broke during update...
so If it's not my fould I'll send it to seller.
I sent the NFS Log can some one help me ?
thank you
Hey I cnt help u with the log but I know a solution... you may flash the modem from the previous firmware you were running, and you will get ur imei correct
Sent from my GT-N7100 using XDA Premium 4 mobile app
http://forum.xda-developers.com/showthread.php?t=2567862
i posted this earlier. if you busted your efs try what i did.
if its only an imei issue try efs pro.
I gave my cell phone to samsung because still in warranty.
but they call today and said my serial number 00000000000 & not covered ask for 200€ !?*
I sent couple days ago my mobile to Samsung center (not seller or store) and they fix everything ?!* now everything fine...
even the serial and imei gone.. don't listen to others just try to send your mobile to send Samsung center.
The .. seller told me 200€ for fix this issue not covored bla bla....
Thank you guys..

Fire TV2 - OpenVPN

Hi,
i have installed openvpn binärie für Android 5.x to /system/xbin and chmof 755
the config is on /sdcard....
i become a tsl error...
the config iss correct (download fron cyberghost)
can everyboudy help me ?
Logfile
Hoggels said:
Hi,
i have installed openvpn binärie für Android 5.x to /system/xbin and chmof 755
the config is on /sdcard....
i become a tsl error...
the config iss correct (download fron cyberghost)
can everyboudy help me ?
Click to expand...
Click to collapse
Here my Config
client
remote 1-ch.cg-dialup.net 443
dev tun
proto udp
auth-user-pass /sdcard/openvpn/pas.key
resolv-retry infinite
redirect-gateway def1
persist-key
persist-tun
nobind
cipher AES-256-CBC
auth MD5
ping 15
ping-exit 90
ping-timer-rem
script-security 2
remote-cert-tls server
route-delay 5
verb 4
comp-lzo
ca /sdcard/openvpn/ca.crt
cert /sdcard/openvpn/client.crt
key /sdcard/openvpn/client.key
.........................
and Logfile
Thu May 5 15:51:48 2016 us=858896 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Thu May 5 15:51:48 2016 us=859110 Re-using SSL/TLS context
Thu May 5 15:51:48 2016 us=859292 LZO compression initialized
Thu May 5 15:51:48 2016 us=859574 Control Channel MTU parms [ L:1554 D:138 EF:38 EB:0 ET:0 EL:0 ]
Thu May 5 15:51:49 2016 us=17836 RESOLVE: NOTE: 1-ch.cg-dialup.net resolves to 10 addresses, choosing one by random
Thu May 5 15:51:49 2016 us=17940 Data Channel MTU parms [ L:1554 D:1450 EF:54 EB:135 ET:0 EL:0 AF:3/1 ]
Thu May 5 15:51:49 2016 us=18028 Local Options String: 'V4,dev-type tun,link-mtu 1554,tun-mtu 1500,proto UDPv4,comp-lzo,cipher AES-256-CBC,auth MD5,keysize 256,key-method 2,tls-client'
Thu May 5 15:51:49 2016 us=18063 Expected Remote Options String: 'V4,dev-type tun,link-mtu 1554,tun-mtu 1500,proto UDPv4,comp-lzo,cipher AES-256-CBC,auth MD5,keysize 256,key-method 2,tls-server'
Thu May 5 15:51:49 2016 us=18121 Local Options hash (VER=V4): '4d1bd89e'
Thu May 5 15:51:49 2016 us=18175 Expected Remote Options hash (VER=V4): '4e0f8044'
Thu May 5 15:51:49 2016 us=18231 Socket Buffers: R=[212992->131072] S=[212992->131072]
Thu May 5 15:51:49 2016 us=18273 UDPv4 link local: [undef]
Thu May 5 15:51:49 2016 us=18315 UDPv4 link remote: 185.32.222.15:443
Thu May 5 15:51:49 2016 us=53970 TLS: Initial packet from 185.32.222.15:443, sid=172cc2ce 4ea31aac
Thu May 5 15:51:49 2016 us=54538 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Thu May 5 15:51:49 2016 us=109247 VERIFY OK: depth=1, /C=DE/O=CyberGhost_VPN/OU=CyberGhost/CN=CyberGhost
Thu May 5 15:51:49 2016 us=111061 VERIFY ERROR: depth=0, error=certificate signature failure: /C=RO/ST=RO/L=Bucharest/O=CyberGhost_VPN/OU=CyberGhost/CN=CyberGhost/name=CyberGhost_VPN/[email protected]
Thu May 5 15:51:49 2016 us=111645 TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed
Thu May 5 15:51:49 2016 us=111842 TLS Error: TLS object -> incoming plaintext read error
Thu May 5 15:51:49 2016 us=112114 TLS Error: TLS handshake failed
Thu May 5 15:51:49 2016 us=112638 TCP/UDP: Closing socket
Thu May 5 15:51:49 2016 us=112978 SIGUSR1[soft,tls-error] received, process restarting
Thu May 5 15:51:49 2016 us=113172 Restart pause, 2 second(s)

need held building LOS16 with docker for unsupported device

Hi, I'm trying to build lineage 16 for my oxygen device. But after repo sync I'm getting this error:
/root/build.sh: line 141: [: $(PLATFORM_VERSION
$(TARGET_PLATFORM_VERSION): integer expression expected
>> [Sun Apr 7 06:12:21 UTC 2019] Missing "vendor/cm", abort
I can't find /root/build.sh and why is "vendor/cm" missing ??
why do I need this "cm" folder ?
I have the same problem as you.
Set cache size limit to 50.0 GB
>> [Fri Apr 12 18:47:02 UTC 2019] Branch: lineage-16.0
>> [Fri Apr 12 18:47:02 UTC 2019] Devices: herolte,hero2lte,
>> [Fri Apr 12 18:47:05 UTC 2019] (Re)initializing branch repository
>> [Fri Apr 12 18:47:07 UTC 2019] Copying '/srv/local_manifests/*.xml' to '.repo/local_manifests/'
>> [Fri Apr 12 18:47:07 UTC 2019] Syncing branch repository
/root/build.sh: line 141: [: $(PLATFORM_VERSION
$(TARGET_PLATFORM_VERSION): integer expression expected
>> [Fri Apr 12 18:49:54 UTC 2019] Missing "vendor/cm", aborting
~/LineageOS/16.0_microG $

Categories

Resources