Related
Hey guys, first of all I'm a complete n00b to all of this stuff, so please bear with me and consider using layman type language with me. Some of you may think I shouldn't even be messing with this stuff with my limited knowledge, but I'm determined to get the best out of my Galaxy Nexus and generally learn quickly and follow directions well.
Here's the bullet-point run-down of what happened:
- Bought a Galaxy Nexus that was "yakjuux" and wasn't getting updates.
- Read through a thread on here on how to flash to "yakju". Did so successfully.
- I then wanted to root since my device was already wiped from unlocking bootloader or flashing some partition or something
- Followed this thread (http://forum.xda-developers.com/showthread.php?p=19583168#post19583168)
- Rebooted, saw the "Superuser" app and thought I nailed it.
- Saw an update for Jellybean, it requested a reboot before install
- Upon reboot I got a dreaded android on it's back with a red exclamation, nearly wet myself. Took battery out, put back in, phone booted normally. It didn't update to JB anymore and when I check for updates it doesn't show. I figured it'll come around again.
- Went to "superuser" app to update, it said it "Failed!" upon trying to gain root access. Upon reading around, downloaded SU Update Fixer from the store, failed gaining root access. Read some more, downloaded "Root Checker" app and it said my device was not rooted.
So where do I go from here? I'm tempted to just follow the 'flash to yakju' thread again and go back to a clean ROM and forget rooting, but maybe there's something simple I can do from here.
** One side note, in that rooting thread I mentioned above, I did not understand step #7 (7. Using CWM recovery, install su.zip that you downloaded in step 1) too clearly. I didn't understand how my phone could even get the su.zip file. So after reading some other rooting methods, I copy and pasted the .zip into the "Internal Storage" drive under My Computer > Samsung Phone > Internal Storage. Then using CWM Recovery on my phone just selected to install it from sdcard (since the Gnex doesn't have an sdcard) and it seemed to be a success. But I'm not sure if that was right. I assumed it was since I got the Superuser app.
Another thing that felt kind of wrong is that, when I flashed to yakju, it wiped my phone clean. I expected rooting to do the same thing, but it didn't (I think because my bootloader was already unlocked?). So I'm not sure if that has anything to do with it either.
Please help. And remember to please refer to things in dummy form. I only know things that involve the above, like using the cmd and typing fastboot and flashing files from a directory, etc.
Thank you in advance.
BryMerc said:
Hey guys, first of all I'm a complete n00b to all of this stuff, so please bare with me and consider using layman type language with me. Some of you may think I shouldn't even be messing with this stuff with my limited knowledge, but I'm determined to get the best out of my Galaxy Nexus and generally learn quickly and follow directions well.
Here's the bullet-point run-down of what happened:
- Bought a Galaxy Nexus that was "yakjuux" and wasn't getting updates.
- Read through a thread on here on how to flash to "yakju". Did so successfully.
- I then wanted to root since my device was already wiped from unlocking bootloaderor or replace some partition or something
- Followed this thread (http://forum.xda-developers.com/showthread.php?p=19583168#post19583168)
- Rebooted, saw the "Superuser" app and thought I nailed it.
- Saw an update for Jellybean, it requested a reboot before install
- Upon reboot I got a dreaded android on it's back with a red exclamation, nearly wet myself. Took battery out, put back in, phone booted normally. It didn't update to JB anymore and when I check for updates it doesn't show. I figured it'll come around again.
- Went to "superuser" app to update, it said it "Failed!" upon trying to gain root access. Upon reading downloaded SU Update fixed from the store, failed gaining root access. Read some more, downloaded "Root Checker" app and it said my device was not rooted.
So where do I go from here? I'm tempted to just follow the 'flash to yakju' thread again and go back to a clean ROM and forget rooting, but maybe there's something simple I can do from here.
One side note, in that rooting thread I mentioned above, I did not understand step #7 (7. Using CWM recovery, install su.zip that you downloaded in step 1) too clearly. I didn't understand how my phone could even get the su.zip file. So after reading some other rooting methods, I copy and pasted the .zip into the "Internal Storage" drive under My Computer > Samsung Phone > Internal Storage. Then using CWM Recovery just selected to install it from sdcard (since the Gnex doesn't have an sdcard) and it seemed to be a success. But I'm not sure if that was right. I assume it was if I got the Superuser app.
Please help. And remember to please refer to things in dummy form. I only know things that involve the above, like using the cmd and typing fastboot and flashing .img files from a directory, etc.
Thank you in advance.
Click to expand...
Click to collapse
Re-install superuser the same way you did the first time. The OTA failed because you have a custom recovery installed. If you want to update to Jelly Bean, look into installing one of the JB ROMs in the development forums, or if you must have the OTA you'll have to flash the stock recovery and make sure everything else is stock as well. OTAs do not care if you are rooted or have an unlocked bootloader.
you can also install the OTA manually, heres my method
1) grab the link for yakju IMM76i > 4.1.1 from here: http://forum.xda-developers.com/showthread.php?t=1764536 and place that iin your sdcard. ALSO download this version of Superuser (chainfires one): http://download.chainfire.eu/197/SuperSU/CWM-SuperSU-v0.93.zip and place that in your sdcard too.
2) install clockworkmod recovery again the same way you did before, using fastboot flash recovery recovery.img, press vol down twice in the bootloader and go straight into the recovery.
3) install the OTA zip you downloaded and placed in your sdcard
4) clear cache and fix permissions (might not be necessary but you can do it just incase)
5) reboot, you should now have stock jellybean. the ClockworkMod recovery would be removed at this point because stock android has a file in system which replaces the stock recovery after every reboot, unless you delete that file.
6) go back into the bootloader, flash recovery as before and again boot straight into the recovery. this time flash the superuser zip you downloaded.
7) reboot. should be all sorted now
JaiaV said:
Re-install superuser the same way you did the first time. The OTA failed because you have a custom recovery installed. If you want to update to Jelly Bean, look into installing one of the JB ROMs in the development forums, or if you must have the OTA you'll have to flash the stock recovery and make sure everything else is stock as well. OTAs do not care if you are rooted or have an unlocked bootloader.
Click to expand...
Click to collapse
Thanks for the fast response.
So basically, I just copy and paste su.zip again into my Internal Storage on my computer. Put my phone into Recovery Mode, plug it in, find and install that su.zip again, and then reboot?
Also, this is something I didn't know: So if you are rooted, you cannot update "normally"? I will always have to flash over the latest ROM?
Thanks.
BryMerc said:
So basically, I just copy and paste su.zip again into my Internal Storage on my computer. Put my phone into Recovery Mode, plug it in, find and install that su.zip again, and then reboot
Click to expand...
Click to collapse
Yes.
BryMerc said:
Also, this is something I didn't know: So if you are rooted, you cannot update "normally"? I will always have to flash over the latest ROM?
Click to expand...
Click to collapse
JaiaV said:
OTAs do not care if you are rooted or have an unlocked bootloader.
Click to expand...
Click to collapse
They only care that the recovery and /system are stock, and even then (as I said) don't care if you're rooted. Rooting doesn't matter. Having a custom recovery does. They are not the same thing. Also, read through ||Nexus|| response.
IINexusII said:
you can also install the OTA manually, heres my method
1) grab the link for yakju IMM76i > 4.1.1 from here: http://forum.xda-developers.com/showthread.php?t=1764536 and place that iin your sdcard. ALSO download this version of Superuser (chainfires one): http://download.chainfire.eu/197/SuperSU/CWM-SuperSU-v0.93.zip and place that in your sdcard too.
2) install clockworkmod recovery again the same way you did before, using fastboot flash recovery recovery.img, but dont reboot this time, press vol down twice in the bootloader and go straight into the recovery.
3) install the OTA zip you downloaded and placed in your sdcard
4) clear cache and fix permissions (might not be necessary but you can do it just incase)
5) reboot, you should now have stock jellybean. the ClockworkMod recovery would be removed at this point because stock android has a file in system which replaces the stock recovery after every reboot, unless you delete that file.
6) go back into the bootloader, flash recovery as before and again boot straight into the recovery. this time flash the superuser zip you downloaded.
7) reboot. should be all sorted now
Click to expand...
Click to collapse
OK, thank you so much. I'm going to do exactly this. When I "fastboot flash" these over again, will they just replace the old ones? Or do I have to uninstall the ones already on my phone or something. I feel like it may get cluttered or something lol, sorry if that's stupid.
BryMerc said:
OK, thank you so much. I'm going to do exactly this. When I "fastboot flash" these over again, will they just replace the old ones? Or do I have to uninstall the ones already on my phone or something. I feel like it may get cluttered or something lol, sorry if that's stupid.
Click to expand...
Click to collapse
no, youre just reflashing the recovery which wont affect anything else. once you reboot it will revert back to the stock recovery anyway, so youll be able to get future OTA updates just fine.
edit: yes itll just be replacing the recovery, nothing else
IINexusII said:
no, youre just reflashing the recovery which wont affect anything else. once you reboot it will revert back to the stock recovery anyway, so youll be able to get future OTA updates just fine.
edit: yes itll just be replacing the recovery, nothing else
Click to expand...
Click to collapse
Hey, I just installed the Jellybean but how do I do #4? Clear cache and fix permissions?
BryMerc said:
Hey, I just installed the Jellybean but how do I do #4? Clear cache and fix permissions?
Click to expand...
Click to collapse
in clockwork mod recovery there should be a "Wipe Cache" option, and for fixing permissions go to "advanced" and "Fix Permissions"
BryMerc said:
Hey, I just installed the Jellybean but how do I do #4? Clear cache and fix permissions?
Click to expand...
Click to collapse
Wait, actually I don't think the JB installed now that I'm staring at the screen properly.
It went Installing update...
assert failed: file .........blah blah
Installation aborted.
Also, the drivers I thought I had for my phone seem to be messing up and in device manager it says "Full" with an exclamation point. I'm not sure why.
Sorry for the late responses as a n00b I'm stuck with 5 minute intervals here.
which country are you from?
IINexusII said:
which country are you from?
Click to expand...
Click to collapse
Canada.
I just tried reinstalling the drivers and everything and for some reason it's not working. I flash Clockwork Recovery, I see the JB.zip, but when I click to install it it says "assert failed" and has the dead Android. Not sure if it's a driver issue, but I redid the Universal Naked one I had before that worked.
BryMerc said:
Canada.
I just tried reinstalling the drivers and everything and for some reason it's not working. I flash Clockwork Recovery, I see the JB.zip, but when I click to install it it says "assert failed" and has the dead Android. Not sure if it's a driver issue, but I redid the Universal Naked one I had before that worked.
Click to expand...
Click to collapse
After selecting "Install zip from sdcard" I see an option "apply /sdcard/update.zip". Is that anything maybe I need to do or something?
check your PM
My Sprint phone keeps trying to install an update. My phone has CWM and ROOTED. What do I need to do get my phone updated from LF9 to LG4? When my phone trys to reboot to install the OTA update it just stops on the CWM screen then I hit reboot and it comes up ok but no update installed.
http://www.androidauthority.com/sprint-galaxy-s3-gets-update-not-jelly-bean-104066/
Check the development thread with OTA update in the title. Pretty much all you have to do is find the update.zip in your cache folder, flash it in CWM, reapply the root from recovery zip, and reboot. Check the thread for better instructions. Super easy.
flonker said:
Check the development thread with OTA update in the title. Pretty much all you have to do is find the update.zip in your cache folder, flash it in CWM, reapply the root from recovery zip, and reboot. Check the thread for better instructions. Super easy.
Click to expand...
Click to collapse
Thank You.
This is how to root your samsung captivate glide on ICS version 4.0.4
Step 1
Go over to http://androidsu.com/superuser/ and scroll down to ARM devices (2.0 – 4.1). Then you will see 3.2-RC2 under it is a link to the download, click it to start the download.
Step 2
Ounce you have downloaded it you want to put it onto the root of your SD card. You can do this by putting it onto your external SD card and copying it over to the root of your phone.
Step 3
Boot into CWMR. You can do this by shutting your phone down completely and ounce its shut off you hold down power and the volume down button.
Step 4
After you boot into CWMR you want to install zip from SD card so hit the volume keys to move up and down and click install zip from SD card. Then you scroll down to where the Superuser zip file is and flash it.
Step 5
Finally, once you have flashed it you want to reboot your phone by going back to main menu and clicking reboot. Now your done!! Just wait for your phone to boot up and you have successfully rooted your phone!
If you don't have CWMR after flashing ICS with the OneClick-Tool use this Guide for reflashing CWMR:
[RECOVERY][7/11/12][I927(R)]Clockwork Mod Touch Recovery 6.0.0.1 (STABLE)
A Working Download Link is somewhere one the last pages of this thread.
You will need the Odin-Tool.
Thanks
Roeni said:
If you don't have CWMR after flashing ICS with the OneClick-Tool use this Guide for reflashing CWMR:
[RECOVERY][7/11/12][I927(R)]Clockwork Mod Touch Recovery 6.0.0.1 (STABLE)
A Working Download Link is somewhere one the last pages of this thread.
You will need the Odin-Tool.
Click to expand...
Click to collapse
The working download link in the recovery thread was posted by me just so you can find it better.
Sent from my SGH-I927 using xda premium
jayjayjoker2 said:
The working download link in the recovery thread was posted by me just so you can find it better.
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
ItsMeBdon said:
This is how to root your samsung captivate glide on ICS version 4.0.4
Step 1
Go over to http://androidsu.com/superuser/ and scroll down to ARM devices (2.0 – 4.1). Then you will see 3.2-RC2 under it is a link to the download, click it to start the download.
Step 2
Ounce you have downloaded it you want to put it onto the root of your SD card. You can do this by putting it onto your external SD card and copying it over to the root of your phone.
Step 3
Boot into CWMR. You can do this by shutting your phone down completely and ounce its shut off you hold down power and the volume down button.
Step 4
After you boot into CWMR you want to install zip from SD card so hit the volume keys to move up and down and click install zip from SD card. Then you scroll down to where the Superuser zip file is and flash it.
Step 5
Finally, once you have flashed it you want to reboot your phone by going back to main menu and clicking reboot. Now your done!! Just wait for your phone to boot up and you have successfully rooted your phone!
Click to expand...
Click to collapse
On that page it only has 3.2-RC3 now intead of 3.2-RC2. Is that basically the same thing but a newer version or something completely different that I don't want?
It shouldn't matter its just the newer version of superuser.
Sent from my SGH-I927 using xda app-developers app
When rooting 4.0.4 can you get it so you can overclock to 1.2ghz like the other rooting guide says?
No, though at some point in the future we'll be able to. Overclocking is something that requires kernel support, and samsung hasn't released the source for the kernel we're using with ICS, so no custom kernels that will work with ICS have been made yet. Once that source is released, it's fairly simple to add overclocking support, and someone will have a custom kernel up fairly quickly. Then you'll just need to flash that, and overclock away.
ItsMeBdon said:
This is how to root your samsung captivate glide on ICS version 4.0.4
Step 1
Go over to http://androidsu.com/superuser/ and scroll down to ARM devices (2.0 – 4.1). Then you will see 3.2-RC2 under it is a link to the download, click it to start the download.
Step 2
Ounce you have downloaded it you want to put it onto the root of your SD card. You can do this by putting it onto your external SD card and copying it over to the root of your phone.
Step 3
Boot into CWMR. You can do this by shutting your phone down completely and ounce its shut off you hold down power and the volume down button.
Step 4
After you boot into CWMR you want to install zip from SD card so hit the volume keys to move up and down and click install zip from SD card. Then you scroll down to where the Superuser zip file is and flash it.
Step 5
Finally, once you have flashed it you want to reboot your phone by going back to main menu and clicking reboot. Now your done!! Just wait for your phone to boot up and you have successfully rooted your phone!
Click to expand...
Click to collapse
Is this smeant to work on the Rogers version SGH-i927R with stock Android 2.3 as well or only 4.0.4 ??
I tried the steps and there were no errors during install but its seems to have only half taken.
That is:
Superuser: Runs and says its rooted. It lists apps given root priv.
Root Checker: Says its rooted.
Titanium Backup: Says not all requirements met on startup and stays on black screen saying aquiring rights.
My Backup Root: Given root but when actually starting a backup it stays at 0%.
Directoy Bind: Given root but when it actually goes to create a link it hangs.
Maruzko said:
Is this smeant to work on the Rogers version SGH-i927R with stock Android 2.3 as well or only 4.0.4 ??
I tried the steps and there were no errors during install but its seems to have only half taken.
That is:
Superuser: Runs and says its rooted. It lists apps given root priv.
Root Checker: Says its rooted.
Titanium Backup: Says not all requirements met on startup and stays on black screen saying aquiring rights.
My Backup Root: Given root but when actually starting a backup it stays at 0%.
Directoy Bind: Given root but when it actually goes to create a link it hangs.
Click to expand...
Click to collapse
read title in op!!! there is a thread for gb root! Google is your friend!
dbrannon79 said:
read title in op!!! there is a thread for gb root! Google is your friend!
Click to expand...
Click to collapse
No prob, I ended up flashing the Stock UCLJ3 Rooted ICS from here:
http://forum.xda-developers.com/showthread.php?t=1994902
Works a treat.
Dumb questions deleted!
I figured it out with help from a lot of threads, and this one.
Thanks everyone!!!!
I now have cwm and am rooted on 4.0.4
I done the procedure but now my phone is freezed
elmer71 said:
I done the procedure but now my phone is freezed
Click to expand...
Click to collapse
Create.a thread in the general forum explaining exactly what you did and when your phone errors
Sorry to continue this thread at such a late date, but I have tried this and am having problems getting it to work.
I have a refurb Captivate Glide that AT&T gave me when the screen died on the original one. Samsung KIES would not update the refurb phone to ICS no matter what I did, so I had to read everything I could to learn to use ODIN to do the ICS update. I got that done (no thanks to AT&T), but now I want to root the device so that I can. tweak the performance and use "rooted apps."
I readily admit that I am a noob... However, I followed the directions in this thread and I am not ending up with a rooted device. I downloaded the ZIP as instructed, I put it in the root of what shows up as "Phone" for the SGH-I927 device in my Win computer's File Manager, rebooted the phone into recovery mode, selected apply update from external storage, then selected "..\", and then reboot. (There was no option to select the ZIP file directly... also, I see some references on the web to the file needing to be named update.zip... do I need to rename the zip?)
The Root Checker app tells me that the phone is not rooted. The app locates the Superuser app (I installed it from Google Play), but it cannot find the su bin.
Any suggestions?
SteveTheTechie said:
...
I readily admit that I am a noob... However, I followed the directions in this thread and I am not ending up with a rooted device. I downloaded the ZIP as instructed, I put it in the root of what shows up as "Phone" for the SGH-I927 device in my Win computer's File Manager, rebooted the phone into recovery mode, selected apply update from external storage, then selected "..\", and then reboot. (There was no option to select the ZIP file directly... also, I see some references on the web to the file needing to be named update.zip... do I need to rename the zip?)...
Any suggestions?
Click to expand...
Click to collapse
External storage in recovery (CWM, right? If not, you have to install clockwork mod recovery via ODIN) is your SD card. You need to put the .zip file on the SD then.
You can also install root zip from internal, so you have to put the zip on the Phone part in windows explorer.
The correct zip should be selected in recovery when installing.
braintweaker said:
External storage in recovery (CWM, right? If not, you have to install clockwork mod recovery via ODIN) is your SD card. You need to put the .zip file on the SD then.
You can also install root zip from internal, so you have to put the zip on the Phone part in windows explorer.
The correct zip should be selected in recovery when installing.
Click to expand...
Click to collapse
Thank you for your reply. When I load the My Files app on the phone and scroll to the bottom, I see the Superuser-3.2-RC3-arm-signed.zip file in the phone's /sdcard folder. Is that as it should be?
When boot the phone into recovery, all I see is folders to select from when I select to update from external storage... I do not see a specific file that I can select. Regarding CWM, I thought that was just another name for the phone recovery mode at boot up... Is CWM something different?
Again, thanks a lot for you assistance.
SteveTheTechie said:
Thank you for your reply. When I load the My Files app on the phone and scroll to the bottom, I see the Superuser-3.2-RC3-arm-signed.zip file in the phone's /sdcard folder. Is that as it should be?
When boot the phone into recovery, all I see is folders to select from when I select to update from external storage... I do not see a specific file that I can select. Regarding CWM, I thought that was just another name for the phone recovery mode at boot up... Is CWM something different?
Again, thanks a lot for you assistance.
Click to expand...
Click to collapse
CWM = Clockwork mod recovery, its needed to install any .zip update, and it differs from the default one. You cannot install any update unless the official one (I guess) via the default recovery.
braintweaker said:
CWM = Clockwork mod recovery, its needed to install any .zip update, and it differs from the default one. You cannot install any update unless the official one (I guess) via the default recovery.
Click to expand...
Click to collapse
Ok, thanks for setting me straight and for the link. A couple of questions...
1) I know how to do the update via Odin, since I updated to ICS w/ Odin. However, before I flash the CWM to the phone, can you tell me if I am going to lose anything (data, apps, etc.) before I do that? I will do a backup, but I would prefer not to have to restore everything on the phone again. (ICS update was bumpy... lost some stuff and restore from backup did not work as well as hoped)
2) Will installing the CWM prevent me from installing other firmware updates in the future?
(e.g., maybe a future Jelly Bean update for Samsung Capivate Glide? )
Again, thanks for all of your generous assistance.
different file, but works.
SteveTheTechie said:
Sorry to continue this thread at such a late date, but I have tried this and am having problems getting it to work.
I have a refurb Captivate Glide that AT&T gave me when the screen died on the original one. Samsung KIES would not update the refurb phone to ICS no matter what I did, so I had to read everything I could to learn to use ODIN to do the ICS update. I got that done (no thanks to AT&T), but now I want to root the device so that I can. tweak the performance and use "rooted apps."
I readily admit that I am a noob... However, I followed the directions in this thread and I am not ending up with a rooted device. I downloaded the ZIP as instructed, I put it in the root of what shows up as "Phone" for the SGH-I927 device in my Win computer's File Manager, rebooted the phone into recovery mode, selected apply update from external storage, then selected "..\", and then reboot. (There was no option to select the ZIP file directly... also, I see some references on the web to the file needing to be named update.zip... do I need to rename the zip?)
The Root Checker app tells me that the phone is not rooted. The app locates the Superuser app (I installed it from Google Play), but it cannot find the su bin.
Any suggestions?
Click to expand...
Click to collapse
This is what I used on my captivate glide, worked like a charm! The intro is loud, you have been warned, otherwise your your speakers up
http://www.youtube.com/watch?v=Cn879wTAXi4
Hi,
I have ClockworkMod Recovery v5.8.0.2. on my Galaxy Nexus. I'm running on XenonHD, but now I want to flash the latest 4.2 rom of Xenon.
Is my recovery outdated and should I update?
If so how do I update a recovery?
According to the cwm recovery page, the latest version for the gnex is 6.0.1.5
I can't remember which version added support for 4.2 (older versions would recursively create the /0 folder...), so you probably want to update it.
To update the recovery, just follow the same steps you did for install.
Your old backups may no longer work properly, although I think there might be a couple solutions mentioned in these forums on how to keep them.
meisanerd said:
According to the cwm recovery page, the latest version for the gnex is 6.0.1.5
I can't remember which version added support for 4.2 (older versions would recursively create the /0 folder...), so you probably want to update it.
To update the recovery, just follow the same steps you did for install.
Your old backups may no longer work properly, although I think there might be a couple solutions mentioned in these forums on how to keep them.
Click to expand...
Click to collapse
Thanks for the reply. I used a one click for all method, so I am not sure how I should install a recovery.
I found this thread: http://forum.xda-developers.com/showthread.php?t=1757146 can I just flash this flashable zip with CWM?
I can't post in the development section that is why I am asking about this here.
Sorry, I do not know if you can just flash the zip over it, as I just did the "fastboot flash recovery cwm.img" method.
If your original method was just clicking on a .bat file, you might be able to replace the .img file that was included with it with the latest img file for cwm, as chances are the bat file just executes the command I listed above. If the script also installed XenonHD, though, I would probably avoid using it as it might overwrite your existing install.
https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en
There you go OP. Install that app, hit the "flash CWM" button, grant root permission (set to remember), when it finishes I would hit the "flash CWM" button again and have it run w/o asking for root permission. You should be on the new CWM, it will show the # for the version you are on. :good:
Okay I will try the Rom manager app.
Just so you know Rom Manager is the official app from Koush, the dev behind CWM.
WiredPirate said:
Just so you know Rom Manager is the official app from Koush, the dev behind CWM.
Click to expand...
Click to collapse
Ooh okay, I heard about the app before but I never used it.
If you search here on the forums I believe you will find the "touch" version of CWM, or you can purchase it within the Rom Manager app and get the updates. I purchased it and I prefer it to the old method of using the volume buttons.
New forum member here, and I'm assuming this would be the place for an authoritative answer on why I can't root my Sprint GS3:
Model No: SPH-L710
Android v: 4.1.1
Baseband v: L710VPBLJ7
Kernel v: 3.0.3.1-329968
Build No: JRO03L.L710VPBLJ7
HW V: L710.14
For starters, I have two friends with S3's who have rooted/modded no problem. However, neither has a Sprint GS3, which I think is why I'm having these issues. The problem I'm having is one I've read about in these forums as well as other Android forums:
No root access after a "successful" install of CWM_SuperUser_v3.0.7.zip.
I have followed the instructions here:
http://www.androidauthority.com/galaxy-s3-sph-l710-sprint-easy-root-99304/
and here:
http://forum.xda-developers.com/showthread.php?t=1726088
The first thing I realized is that I can only get to the ClockWorkMod Recovery menu if I remove the battery after a successful install of that in Odin. Then I put the battery back in and boot to the ClockWorkMod Recovery, which allows me to "install zip from sdcard", etc;. Then I choose to install the zip via the menus, it takes a few moments then shows it is successful.
At this point, by all the info I have read, the phone should be rooted and BusyBox and RootChecker should be good with my phone.
It isn't and they aren't.
I have ran through this exercise perhaps 20 times or more and still no root.
I have seen several others post in Android forums, including this one, with the same issue, and I have seen no one offer any meaningful suggestions. I'm wondering what the common denominator is here?
I think the fact that I only get one "usage" of ClockWorkMod Recovery after the initial install of it, is the problem. If I reboot again after that first use, it defaults back to the stock Android Recovery Menu. I have read in the forums that "some people" have that issue, and that there is no workaround, other than removing the battery, then boot into ClockWorkMod Recovery and Root the phone. My friends with S3's don't have that issue. Once they install ClockWorkMod Recovery it is there and they can boot to it whenever they want.
Any help on this will be greatly appreciated, as I want to be able to manage my phone correctly.
TIA!
.tar file
Paleogryph said:
New forum member here, and I'm assuming this would be the place for an authoritative answer on why I can't root my Sprint GS3:
Model No: SPH-L710
Android v: 4.1.1
Baseband v: L710VPBLJ7
Kernel v: 3.0.3.1-329968
Build No: JRO03L.L710VPBLJ7
HW V: L710.14
For starters, I have two friends with S3's who have rooted/modded no problem. However, neither has a Sprint GS3, which I think is why I'm having these issues. The problem I'm having is one I've read about in these forums as well as other Android forums:
No root access after a "successful" install of CWM_SuperUser_v3.0.7.zip.
I have followed the instructions here:
http://www.androidauthority.com/galaxy-s3-sph-l710-sprint-easy-root-99304/
and here:
http://forum.xda-developers.com/showthread.php?t=1726088
The first thing I realized is that I can only get to the ClockWorkMod Recovery menu if I remove the battery after a successful install of that in Odin. Then I put the battery back in and boot to the ClockWorkMod Recovery, which allows me to "install zip from sdcard", etc;. Then I choose to install the zip via the menus, it takes a few moments then shows it is successful.
At this point, by all the info I have read, the phone should be rooted and BusyBox and RootChecker should be good with my phone.
It isn't and they aren't.
I have ran through this exercise perhaps 20 times or more and still no root.
I have seen several others post in Android forums, including this one, with the same issue, and I have seen no one offer any meaningful suggestions. I'm wondering what the common denominator is here?
I think the fact that I only get one "usage" of ClockWorkMod Recovery after the initial install of it, is the problem. If I reboot again after that first use, it defaults back to the stock Android Recovery Menu. I have read in the forums that "some people" have that issue, and that there is no workaround, other than removing the battery, then boot into ClockWorkMod Recovery and Root the phone. My friends with S3's don't have that issue. Once they install ClockWorkMod Recovery it is there and they can boot to it whenever they want.
Any help on this will be greatly appreciated, as I want to be able to manage my phone correctly.
TIA!
Click to expand...
Click to collapse
You have to flash a .tar file in odin that has root access for your device. CWM is just recovery. just do a search for .tar files for your device.
What he said
Also, CWM is replaced by the stock recovery as a safety precaution by the system (when it detects that stuff has been tampered with), theres a flashable zip by Team WIN that fixes this
I dont have the link handy but try googling it with "xda" at the end
Sent from my PG06100
Tar file
I didn't specifically mention it, but I did, and am continuing to, flash the clockworkmod.TAR file to the phone using Odin.
I have been assuming this tar file is ClockWorKMod Recovery, the menu I am able to get to on the next boot to allow me to then attempt to install the CWM_SuperUser_v3.0.7.zip.
Success!
I flashed with the SU recommended by evo4gnoob at this forum post:
http://forum.xda-developers.com/showthread.php?t=2143406
It worked and after a reboot BusyBox and RootChecker showed I was SU and I can now manage the phone correctly.
nice
Paleogryph said:
I flashed with the SU recommended by evo4gnoob at this forum post:
http://forum.xda-developers.com/showthread.php?t=2143406
It worked and after a reboot BusyBox and RootChecker showed I was SU and I can now manage the phone correctly.
Click to expand...
Click to collapse
nice work dude
This is the only link you need it has all the files and video on how to root your Sprint S3,this will also work on other variants
http://forum.xda-developers.com/showthread.php?p=27761844
Transmitted with a portable device using Xparent Blue Tapatalk 2