I am running the latest mikrom and lionfish kernel. for some reason, all of a sudden the WiMAX says turning on and you can't turn it off. I tried reflashing radios, clearing cache etc. nothing. Any ideas short of reflashing?
Sent from my iPad using Tapatalk HD
Have you checked your rsa keys for WiMAX? Go to market, search wimax key checker, download and run and report back.
Sent from my ADR6425LVW using Tapatalk 2
Go into recovery and wipe cache and dalvik cache, should be fixed. If not, re-boot your phone for a minimum of 1 hour (60) minutes if not more, re-boot and you should be good to go.
Worked for me, every single Evo 4G is different than the one someone else has.
I just turned airplane mode on then off and then tried 4g and it worked everytime on mikg.
Sent from my PC36100 using xda premium
Related
I am using Synergy RLS1, anytime i turn on the 4g it keeps saying "turning on" it doesn't connect nor turn on it's just stuck on turning on. i turn off the phone and take out the battery, wipe cache and Dalvic cache but NOTHING everything else work fine but its just 4g... please help me!
also WiFi signal SUCKS is there anyway to increase my phone picking up WiFi at a distance?
Go to the market and download Wimax key checker to see if you still have your keys
Sent from my Gruesomes Rom using XDA App
evo4gnoob said:
Go to the market and download Wimax key checker to see if you still have your keys
Sent from my Gruesomes Rom using XDA App
Click to expand...
Click to collapse
it says i have everything
Sometimes my wifi will say its connected and i know the router is working fine but anytime i use the browser or the xda app or the market or anything that uses data it will not work and it times out. If i switch to 3g then it usually will work fine. But sometimes when i switch over to 3g that does not work either this has only happened a couple of times with 3g not working. But wifi goes out every other day for a hour or so and reboots and clearing cache and dalvic does nothing
Edit: ok I have a problem my wifi is toast it will not work. Tried connecting to three different routers and nothing. Anyone have any pointers?
Bump.... anyone able to help me???
Sent from my SPH-D710 using XDA App
what rom are you using?
did you try a different one?
Is wifi sleep set to never
The newest calkulin v2.8.1 and it is set to never
Sent from my SPH-D710 using XDA App
I assume you have rebooted your router first, then tried to reset up the phone after the router rebooted; have you confirmed your router is sending out wifi signals via trying it with another device?
are you using 2.4 ghz wireless phones in your house?
that will interfere with wifi signals
did you ensure your router security settings and your phone security settings are identical?
yup did all that and no I don't have any wireless phones. It was working perfectly the other day. I have tried 3 different wifi conections with the same result. The wifi acts and looks like its connected and working but can not use any data it times out or says cannot display page.
Sent from my SPH-D710 using XDA App
Tried different kernel?
Flash Calkulin's format all twice and reflash ROM.
Sent from my SPH-D710 using XDA App
are you on the stock kernel?
overclocked, or underclocked?
change any of the battery or clock speed settings, or is everything stock?
Ok I will try format all. Do you happen to have a link?
Im on the stock kernel that comes with the calkulin 2.8.1 I have not done any thing else but flash that rom. So maybE I should try a new kernel? Anyone have any suggestions?
Sent from my SPH-D710 using XDA App
For some reason, Whenever I try to use 4G, it shows as connected, but I can't use any data, nothing connects when using apps of internet, but it shows at connected. Any ideas what to do. I tried unrooting, factory resets, etc
Mine has done this before and a simple toggle fixed it
Sent from my awesomely EPIC Phone
Try a different modem. Make sure you update profile and prl. Im on fd26 modem right now, seems to work well for me.
Get rid of sprint. That is what I am doing when the s3 goes to a t and t. 17 years is long enough to wait for them to get better.
Sent from my SPH-D710 using XDA
Lol
Sent from my SPH-D710 using XDA
Was running Aero's 10-11 build of CM10. Have been using his CM10 builds for a couple of weeks. Last night, the phone seemingly random rebooted on me. Rebooted when I tried to make a call after that. Now I can't get data. I have signal, and after wiping everything and restoring nandroid, I can make calls without the reboot, but have no 3g, or even 1x. I have flashed fresh installs of CM10, CM9, CM7, leak firmware w/ .320 radio, .312 radio, tried a couple different sets of apn, copied from My wife's dinc2 running cm7. Toggled mobile data numerous times...I'm out of ideas. Any thoughts?
Sent from my Incredible 2 using xda app-developers app
Look at today's post about antennas, make sure they are getting good contacts on the back cover
Sent from my Incredible 2 using xda app-developers app
Yeah, tried the cover a few times. But I have good signal strength, just as good as my wife's dinc2. Only difference is that I absolutely can't get data. On WiFi, everything is cool. And haven't had any reboots since before the OP.
I even restored to OE, tried *228 both options, again no luck. Rerooted and restored cm10.
Sent from my Incredible 2 using xda app-developers app
U guys need to check out my cm9/cm10 thread I've accomplish the global ability to have working GSM/cdma
Sent from my Incredible 2 using xda app-developers app
I'm having some issues. I am on Incredible HD RLS 2, I haven't been able to get on WiFi and this isn't the only ROM where WiFi isn't working. It will just never connect. Well, I tried to install ICS Official global CM9 upon initial boot it said it couldn't read my SIM. I powered down pulled the SIM put it back in and put the phone back together and then I couldn't get any service. No matter what I did I have no service.
Yes I followed all the instructions, wiped everything, flashed the proper gapps and the kernel.
Since that didn't work I went back to my nand and still no service. Anyone have any suggestions?? Please help
On global cm9 rum through setup and change network mode to cdma/evdo becuz it defaults to gsm
I'm so fresh you can suck my nits...
Will give it a shot, thanks.
Sent from my PG86100 using xda app-developers app
Awesome, got service back, but WiFi is still not working. It just forever searches and never connects to a network. Anyone have any ideas?
This happens to me sometimes and restarting my router usually clears it up, not sure if you have tried that, just throwing it out there.
I can't reset the router, I'm on a college campus. I have the latest firmware and radios,switched out rom after Rom and still WiFi doesn't work. Any other suggestions?
Sent from my PG86100 using xda app-developers app
JJsax said:
I can't reset the router, I'm on a college campus. I have the latest firmware and radios,switched out rom after Rom and still WiFi doesn't work. Any other suggestions?
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Anyone?
Sent from my PG86100 using xda app-developers app
Maby try to go under wifi and press the menu soft button to get to the advanced options and see if you have both freq checked idk if it'll help or
Sent from my Incredibly still working