Develop Bugs

ICS is out in Canada/Telus (SGH-T989D)

ICS is rolling out in Canada, Telus (SGH-T989D)
Canada/Telus (SGH-T989D/ZKDTLS)
T989DTLLE4/T989DTLLE4/T989DTLLE4/T989DTLLE4
build.prop
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IML74K
ro.build.display.id=IML74K.TLLE4
ro.build.version.incremental=TLLE4
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Wed May 16 23:56:26 KST 2012
ro.build.date.utc=1337180186
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-82
ro.build.tags=release-keys
ro.product.model=SGH-T989D
ro.product.brand=samsung
ro.product.name=SGH-T989D
ro.product.device=SGH-T989D
ro.product.board=MSM8660_SURF
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=CA
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=SGH-T989D
ro.tether.denied=false
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=SGH-T989D-user 4.0.3 IML74K TLLE4 release-keys
ro.build.fingerprint=samsung/SGH-T989D/SGH-T989D:4.0.3/IML74K/TLLE4:user/release-keys
ro.build.characteristics=default
# Samsung Specific Properties
ro.build.PDA=T989DTLLE4
ro.build.hidden_ver=T989DTLLE4
ro.build.changelist=579656
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.type=dyn
ro.sf.compbypass.enable=1
dalvik.vm.heapsize=64m
dev.pm.dyn_samplingrate=1
debug.enabletr=0
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.UseSwim=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.sync.swim.mode=false
persist.sys.hdmi.on=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=false
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-scan=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=17
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=true
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
# System property for cabl
ro.qualcomm.cabl=0
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
# system prop for adb_notification
persist.adb.notify=0
# system prop for usb_notification
persist.usb_mass_storage.notify=0
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=false
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
# for 480x800 panel
ro.sf.lcd_density=240
#add camera sound property for KOR concept
ro.camera.sound.forced=1
# Set default ringtone for Korea concept
ro.config.ringtone=ANDROMEDA.ogg
ro.config.notification_sound=Moonbeam.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.config.media_sound=over_the_horizon_preview.ogg
# System property for SIM
persist.radio.apm_sim_not_pwdn=1
# System prop for qmi adb log
persist.radio.adb_log_on=1
# Multimedia property for Smart View
media.enable-commonsource=true
# System property for UMS
persist.ums.popup=0
# System proverty for sys info indication
persist.radio.add_power_save=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
dev.sfbootcomplete=0
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.0_r2
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.error.receiver.default=com.samsung.receiver.error
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-samsung
ro.com.google.clientidbase.am=android-samsung
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.locationfeatures=1
ro.kernel.qemu=0
ro.monkey=0
ro.secdirenc=true
ro.secsddecryption=true
ro.secfulldirenc=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Source: @SGS2Update

good news..cant wait till Monday

Wonder if anyone will do anything with this.. Maybe Mr.X?
Sent from my SGH-T989 using xda premium

Damn, I was hoping it would be 4.0.4 but it is 4.0.3.
Any hope for TMO or you guys thing they will follow the telus launch?

Rod3 said:
Damn, I was hoping it would be 4.0.4 but it is 4.0.3.
Any hope for TMO or you guys thing they will follow the telus launch?
Click to expand...
Click to collapse
I'm sure our update on Monday will be 4.0.3
Sent from my SGH-T989 using xda premium

its it ota or kies?
- taz b.

any odin package yet? dont think we can flash directly though kies sinces it will look for a t-989D

I just sent a tweet to Telus Support regarding the update and this is the response that was given:
Hi there, the ICS upgrade is in acceptance testing and will likely be made available as of June 12th. http://www.telusmobility.com/pv_obj...92D19E2F2E672442F40200/filename/DOU_May31.pdf

Would the 4.03 kernel give enough info to ppl to make a 4.04.

the differences in 4.0.3 in 4.0.4 is minimal and only really benefits the galaxy nexus because it had a battery drain problem with 4.0.3

is their a uvlde update with the patch for the telus device?
Im just wondering cause t mobile told me we needed the update on our phones before we get 4.0

tdizzle404 said:
is their a uvlde update with the patch for the telus device?
Im just wondering cause t mobile told me we needed the update on our phones before we get 4.0
Click to expand...
Click to collapse
I am pretty sure that my phone has not had any updates since launch. Definitely not any type of UVLDE maintenance update. I wonder how this will be handled by the devs, maintenance update included, not included, etc.
Sort of teetering on the fence with whether I should go back to stock or not
Sent from my SGH-T989D using xda premium

Chochiwpg said:
I just sent a tweet to Telus Support regarding the update and this is the response that was given:
Hi there, the ICS upgrade is in acceptance testing and will likely be made available as of June 12th. http://www.telusmobility.com/pv_obj...92D19E2F2E672442F40200/filename/DOU_May31.pdf
Click to expand...
Click to collapse
It's officially available on Samsung FUS - Firmware Update Server. You should be able to update via Kies.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Has anybody tried it out yet? I'll be able to try it out in 5 hours or so, when I get home.
Quick screenshot of the contents of the zip. Looks like this could be used in Odin. But it's available on Kies as well? Might have to check that out first.

skadude66 said:
Has anybody tried it out yet? I'll be able to try it out in 5 hours or so, when I get home.
Quick screenshot of the contents of the zip. Looks like this could be used in Odin. But it's available on Kies as well? Might have to check that out first.
Click to expand...
Click to collapse
I haven't tried it because mine is standard (GT-I9100). You should be able to update via Kies. Anyways, you can extract *.tar.md5 file from zip e flash it using PDA option in Odin.

skadude66 said:
Has anybody tried it out yet? I'll be able to try it out in 5 hours or so, when I get home.
Quick screenshot of the contents of the zip. Looks like this could be used in Odin. But it's available on Kies as well? Might have to check that out first.
Click to expand...
Click to collapse
yes you can flash through odin as normal

Somebody should install this and provide our devs with a system dump.
I would do it but i am at work and they frown on that.

Octane70 said:
Somebody should install this and provide our devs with a system dump.
I would do it but i am at work and they frown on that.
Click to expand...
Click to collapse
I am at work as well.. Just need to go back to stock, correct? I know with Kies you do, but with Odin as well?
Sent from my SGH-T989D using xda premium

rizdroid said:
I haven't tried it because mine is standard (GT-I9100). You should be able to update via Kies. Anyways, you can extract *.tar.md5 file from zip e flash it using PDA option in Odin.
Click to expand...
Click to collapse
Will Kies allow you to update or would I be able to flash via PDA option in Odin if I am currently Rooted? Just running stock Telus ROM, but rooted with custom recovery.
I can try when I get home as well, if someone hasn't done so already by that time.

I'm thinking to be safe I will go back to stock, make sure my phone is recognized in Kies and go from there. Odin will be my plan b! Seems like the safest possible option.
Sent from my SGH-T989D using xda premium

I747UCALH1 - "Official" Leak

WARNING: <- read this for real
This will wipe your internal sdcard. This does contain bootloaders, flash at your own risk! This is for the I747 only! No one but you can be held responsible for your actions.
How to Root:
Flash CWM or TWRP with odin, boot into recovery and flash a SuperUser zip.
Download:
http://www.gigashare.in/3e46c
MD5: 6A99DFF8CCC886757E63ED3A556D1D99
Other info:
This is considered beta software until it is officially pushed out by AT&T/Samsung. Leaks do NOT come with changelogs, so don't ask, no one knows. I won't be providing any other versions of this leak, use the oneclick exe or wait for someone else to build a cwm/twrp flashable.
FLAMING or TROLLING:
The thread will be closed and links deleted.
Build.prop:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=IMM76D.I747UCALH1
ro.build.version.incremental=I747UCALH1
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Wed Aug 1 16:03:05 KST 2012
ro.build.date.utc=1343804585
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-87
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I747
ro.product.brand=samsung
ro.product.name=d2uc
ro.product.device=d2att
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product_ship=true
# Samsung Specific Properties
ro.build.PDA=I747UCALH1
ro.build.hidden_ver=I747UCALH1
ro.build.changelist=985684
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2att
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=d2uc-user 4.0.4 IMM76D I747UCALH1 release-keys
ro.build.fingerprint=samsung/d2uc/d2att:4.0.4/IMM76D/I747UCALH1:user/release-keys
ro.build.characteristics=att
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
ro.sf.compbypass.enable=1
ro.sf.lcd_density=320
dev.pm.dyn_samplingrate=1
#
# system props for the cne module
#
persist.cne.UseCne=false
persist.cne.UseSwim=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.sync.swim.mode=false
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.speaker.location=high
#camera changes..
persist.sys.camera.transform=0
persist.sys.camera.connect=0
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system prop for Bluetooth Dialup Networking
#
ro.qualcomm.bluetooth.dun=false
# system prop for Bluetooth FTP profile
ro.qualcomm.bluetooth.ftp=false
#
# system property for Bluetooth Handsfree Profile Wide Band Speech
#
ro.qualcomm.bluetooth.hfp.wbs=false
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=0
# System property for Default Brightness
ro.lcd_min_brightness=20
# System property for Default touch key light duration
ro.button_key_light=6000
# System property for SIM
persist.radio.apm_sim_not_pwdn=1
# Multimedia property for Smart View
media.enable-commonsource=true
# System proverty for sys info indication
persist.radio.add_power_save=1
# System proverty snapshot disable
persist.radio.snapshot_disabled=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.sec.fle.encryption=true
windowsmgr.max_events_per_sec=100
ro.hdcp2.rx=tz
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.monkey=0
ro.error.receiver.default=com.samsung.receiver.error
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
dev.sfbootcomplete=0
ro.com.google.clientidbase=android-samsung
drm.service.enable=true
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=off
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.0_r3
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
MOD EDIT: I HAVE PUT THIS IN DEVELOPMENT-the Archangel

Quite odd that it's not jelly bean . Either way, thank you.
Edit: Can someone please post their experience with this leak ASAP?

thanks!!!
@ theRominator- I think we will start seeing the JB leaks in a month or so.

theROMinator said:
Quite odd that it's not jelly bean . Either way, thank you.
Edit: Can someone please post their experience with this leak ASAP?
Click to expand...
Click to collapse
I have been using it for a week now, works fine.

Can someone make a flashable zip of modem?
Sent from my SGH-I747 using xda premium

Can't we flash this using Mobile Odin and avoid the new boot loader
Never mind it's an exe
Sent from my SAMSUNG-SGH-I747 using xda premium

designgears said:
I have been using it for a week now, works fine.
Click to expand...
Click to collapse
Hey DG, any chance of seeing you working on ROM for i747?

meleii said:
Can someone make a flashable zip of modem?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
+1 for the flashable modem
Sent from my SGH-I747 using xda app-developers app

Should post this in the att forum
Sent from my Galaxy Nexus using Tapatalk 2

weedolo9y said:
Should post this in the att forum
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
This is the att forum. Until you meant to say to post in att development section.

Thanks dg going to try this out tonight
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

I think we all could agree on a Cognition rom for the S3
Sent from my SAMSUNG-SGH-I747 using xda premium

Thankz to you sir
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Is this a jelly bean leak?

ssfirme said:
Is this a jelly bean leak?
Click to expand...
Click to collapse
No ..........

I must thank you DG for the leaks you give to us at&t Sammy users. But (as respectfully as possibly meant) could you put in the op about the possibility of brick when flashing a bootloader.
If not I can give a lil info.
DISCLAIMER:
When flashing a bootloader always plug your USB cable directly into the back of your computer. If you somehow don't get enough power or lose power during a flash your phone will become a $600 paperweight.
Please weigh your options and KNOW WHAT YOUR RISKING!!! Someone will make a cwm flashable zip really soon. So be careful. The new bootloader may make triangle away (counter reset app) no longer reset your flash counter.
Again thanks DG and I mean no disrespect by my post. I just want the people new to androids and Samsung aware of the risks.
Sent from my SGH-I747 using xda premium

designgears said:
I have been using it for a week now, works fine.
Click to expand...
Click to collapse
Since you have been using for a week what if any changes have you seen or noticed thanks.

Oh Btw this is in development now

Well did anybody load this bad boy up yet
Sent from my SAMSUNG-SGH-I747 using xda premium

designgears said:
I have been using it for a week now, works fine.
Click to expand...
Click to collapse
Nice to see you here. Remember you from HTC one x. Didn't know you got a gs3
Sent from my SGH-I747M using xda premium

T-mobile 4.1.2... Has anybody tried it yet?

4.1.2 premium suite got released on T-Mobile, was wondering if anybody has tried it on AT&T SIII yet?
http://forum.xda-developers.com/showthread.php?t=2276492&page=3

elfie said:
4.1.2 premium suite got released on T-Mobile, was wondering if anybody has tried it on AT&T SIII yet?
http://forum.xda-developers.com/showthread.php?t=2276492&page=3
Click to expand...
Click to collapse
I'm downloading it and will flash once my battery is over 60%. I'll let you know how its working.

popi09 said:
I'm downloading it and will flash once my battery is over 60%. I'll let you know how its working.
Click to expand...
Click to collapse
Please let me know how it works!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

I've been running it since this morning. Removed some Tmobile apps with Titanium, made some edits to the build.prop to identify itself as an att phone. It's been running great all day. An advanced reboot mod was just posted in their forum for this release. I just flashed it as well and it seems to be working as well.

How exactly do you get 4.1.2? Flash a tmobile rom then flash the radio?
Sent from my SAMSUNG-SGH-I747 using xda premium

Just flash the rom, do not flash the radio. And as far as I know, this only works for tmobile roms as their hardware is almost identical to ours.

Are you running stock rom, or the deodexed rom?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Downloading now.. will flash tonight.

lordmorphous said:
I've been running it since this morning. Removed some Tmobile apps with Titanium, made some edits to the build.prop to identify itself as an att phone. It's been running great all day. An advanced reboot mod was just posted in their forum for this release. I just flashed it as well and it seems to be working as well.
Click to expand...
Click to collapse
Any chance to post what you change to prop?
Thank you
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

lthary said:
Any chance to post what you change to prop?
Thank you
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I actually don't remember everything, but here is my build.prop:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JZO54K
ro.build.display.id=JZO54K.T999UVDMD5
ro.build.version.incremental=T999UVDMD5
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Mon Apr 15 11:54:03 KST 2013
ro.build.date.utc=1365994443
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-128
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I747
ro.product.brand=samsung
ro.product.name=d2uc
ro.product.device=d2att
ro.product.board=MSM8960
ro.chipname=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2att
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=d2uc-user 4.1.2 JZO54K T999UVDMD5 release-keys
ro.build.fingerprint=samsung/d2uc/d2att:4.1.2/JZO54K/T999UVDMD5:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=T999UVDMD5
ro.build.hidden_ver=T999UVDMD5
ro.build.changelist=1128078
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
debug.compbypass.enable=1
debug.hwui.render_dirty_regions=true
dalvik.vm.heapsize=64m
debug.enable.wl_log=1
debug.mdpcomp.maxlayer=3
#
# system props for the cne module
#
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.feature=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system property for Bluetooth Handsfree Profile version
#
ro.bluetooth.hfp.ver=1.6
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=1
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
ro.sf.lcd_density=320
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# System property for default touch key light duration
ro.button_key_light=6000
# System proverty for sys info indication
persist.radio.add_power_save=1
# System property for HDMI/WFD
persist.sys.camera.connect=0
persist.sys.camera.transform=0
persist.sys.videomode=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=10m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.hdcp2.rx=tz
ro.sec.fle.encryption=true
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=CLEAN_Tmo_Jingle.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.monkey=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=off
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.gmsversion=4.1_r4
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

Just flashed...works fine.

I flashed it, works great. I tried to fix all the d2tmo references in the build prop and that caused problems. I re flashed to fix...
I killed off all the tmo bloat with no issues.

lordmorphous said:
Just flash the rom, do not flash the radio. And as far as I know, this only works for tmobile roms as their hardware is almost identical to ours.
Click to expand...
Click to collapse
I mean a ATT radio lol.
Sent from my SAMSUNG-SGH-I747 using xda premium

How do you flash the rom without the radio?

Russ77 said:
I flashed it, works great. I tried to fix all the d2tmo references in the build prop and that caused problems. I re flashed to fix...
I killed off all the tmo bloat with no issues.
Click to expand...
Click to collapse
How the lte works for you?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

dave1977nj said:
How do you flash the rom without the radio?
Click to expand...
Click to collapse
I did it with mobile Odin. After selecting the .tar file you can clear the modem and recovery options before flashing.
---------- Post added at 06:10 AM ---------- Previous post was at 06:08 AM ----------
lthary said:
How the lte works for you?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I don't know, my house doresnt get LTE but I'll check later today when going to work.
I changed a lot of build.prop stuff to reflect att instead of tmo, and that ended up breaking play movies. The tmo build prop however works perfectly. Go figure.

dave1977nj said:
How do you flash the rom without the radio?
Click to expand...
Click to collapse
I just flashed the zip posted on http://forum.xda-developers.com/showthread.php?t=2276645 with cwm
It preserved my radio.
lthary said:
How the lte works for you?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
LTE work fine...it even has a 4G LTE icon

elfie said:
I just flashed the zip posted on http://forum.xda-developers.com/showthread.php?t=2276645 with cwm
It preserved my radio.
LTE work fine...it even has a 4G LTE icon
Click to expand...
Click to collapse
By the way you might have to add the pta apn for LTE to work...See attachement

Should be easy to add with multiwindow
Sent from my SGH-T999 using xda app-developers app

I have added the access point for att and I have lte !!!! I managed to replace some of the bild.prop to show that I use an att phone, works fine, thanks everyone for help!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

[Resolved] How to add Multi-Carrier support??

I have yet to figure out how to add more carriers into my ROM so
That it is more user friendly, sadly everyone I have asked about
Adding in Multi-Carrier support hasn't replied.
Hope someone can enlighten me on the subject a little.
Cheers.

Adizzzle said:
I have yet to figure out how to add more carriers into my ROM so
That it is more user friendly, sadly everyone I have asked about
Adding in Multi-Carrier support hasn't replied.
Hope someone can enlighten me on the subject a little.
Cheers.
Click to expand...
Click to collapse
Something in a rom with an aroma installer or you just port them each and post them in the respective forums. Which are you trying to do ?
Sent from my SAMSUNG-SGH-I747 using xda premium

hednik said:
Something in a rom with an aroma installer or you just port them each and post them in the respective forums. Which are you trying to do ?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I just wanted to port in some more carriers so when it first boots
the ROM is more compatible with more then just Telus users.
I haven't ever used aroma and don't plan to if I can.

Adizzzle said:
I just wanted to port in some more carriers so when it first boots
the ROM is more compatible with more then just Telus users.
I haven't ever used aroma and don't plan to if I can.
Click to expand...
Click to collapse
With a Canadian ROM all the user needs to do is as their APN and change their build prop to reference their specific device. An easy way to do this would be to make a flashable zip with the apns.conf file and like the one from my ROM and then make a build prop for the at&t device or any other i747m device that the user can flash after installing the ROM.
apns-conf.xml - 198.08 KB
Sent from my SAMSUNG-SGH-I747 using xda premium

So basically I'd have to just create the flashable zip + updater-script, add in the apns-conf.XML file along with an at&t build.prop? Sorry to clarify, I'm just a little uncertain.

Adizzzle said:
So basically I'd have to just create the flashable zip + updater-script, add in the apns-conf.XML file along with an at&t build.prop? Sorry to clarify, I'm just a little uncertain.
Click to expand...
Click to collapse
Yep that's the really basic way and it works for at&t and Canadian ROMs so you don't have to upload a whole new ROM. You can get more in depth if you so desire but then you'd need to do it as a separate ROM
Sent from my SAMSUNG-SGH-I747 using xda premium

hednik said:
Yep that's the really basic way and it works for at&t and Canadian ROMs so you don't have to upload a whole new ROM. You can get more in depth if you so desire but then you'd need to do it as a separate ROM
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Well I guess I better start learning some more of that updater-script stuff then, thanks very much @hednik now back to the Comp I suppose.

Adizzzle said:
Well I guess I better start learning some more of that updater-script stuff then, thanks very much @hednik now back to the Comp I suppose.
Click to expand...
Click to collapse
If you can wait I can make one tomorrow for you. I'm not good at it either but I've got a blank one I use for a template
Sent from my SAMSUNG-SGH-I747 using xda premium

I can most definitely wait, I think I may give it a go on my own as well so I can compare cause I'll probably end up giving myself a boot loop
I really appreciate the help dude.

Adizzzle said:
I can most definitely wait, I think I may give it a go on my own as well so I can compare cause I'll probably end up giving myself a boot loop
I really appreciate the help dude.
Click to expand...
Click to collapse
Can you send me your build prop ? I don't want to download the whole rom just for that haha
---------- Post added at 07:52 AM ---------- Previous post was at 07:52 AM ----------
Adizzzle said:
I can most definitely wait, I think I may give it a go on my own as well so I can compare cause I'll probably end up giving myself a boot loop
I really appreciate the help dude.
Click to expand...
Click to collapse
Can you send me your build prop ? I don't want to download the whole rom just for that haha. Just copy and paste is here and wrap code tags around it. Thanks !

Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JZO54K
ro.build.display.id=JZO54K.I747MVLDMF1
ro.build.version.incremental=I747MVLDMF1
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Mon Jun 3 20:10:12 KST 2013
ro.build.date.utc=1370257812
ro.build.type=user
ro.build.user=se.infra
ro.build.host=R0709-09
ro.build.tags=release-keys
ro.product.model=SGH-I747M
ro.product.brand=samsung
ro.product.name=d2vl
ro.product.device=d2can
ro.product.board=MSM8960
ro.chipname=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2can
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=d2vl-user 4.1.2 JZO54K I747MVLDMF1 release-keys
ro.build.fingerprint=samsung/d2vl/d2can:4.1.2/JZO54K/I747MVLDMF1:user/release-keys
ro.build.characteristics=default
# Samsung Specific Properties
ro.build.PDA=I747MVLDMF1
ro.build.hidden_ver=I747MVLDMF1
ro.build.changelist=1189444
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
debug.compbypass.enable=1
debug.hwui.render_dirty_regions=true
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
debug.mdpcomp.maxlayer=3
#
# system props for the cne module
#
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.feature=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system property for Bluetooth Handsfree Profile version
#
ro.bluetooth.hfp.ver=1.6
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=1
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
ro.sf.lcd_density=320
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# System property for Default touch key light duration
ro.button_key_light=6000
# System proverty for sys info indication
persist.radio.add_power_save=1
# System property for HDMI/WFD
persist.sys.camera.connect=0
persist.sys.camera.transform=0
persist.sys.videomode=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.hdcp2.rx=tz
ro.sec.fle.encryption=true
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=01_Over_the_horizon_Acoustic.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.monkey=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.com.google.apphider=off
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=4.1_r5
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

Hello my watch has your code how is that?

Problems with upgrade to 4.3 T999UVUENC2 T-Mobile

I buy this t999 on internet, the display was broken and the seller told me that the model was i747, when i change the display.
I restore with KIES, the phone was upgrade to 4.3
The matter was thah te imei and S/N in case is not the same that appear in settings, i discover this after install.
The cell power on correctly, the matter is thah don´t the wifi, bluetooth; the camera says CAMERA ERROR, i try to install another app to works the camera but nothing happends.
When KIES upgrade the phone to 4.3, the version is UVUENC2.
What can i do to camera, wifi and bluetooh works, i was reading that its posible that my cell is T999L but i not shure,
Cause says thath can flash a rom of T999 in a T999L, sometimes when flash roms, don´t works some functions like camera, wifi, buetooth as mi cell.
http://forum.xda-developers.com/showthread.php?t=2370981
Can you help me, i´m noob in this cell.
I make root and make a backup of IMEI and build.drop
This is the content of build.drop file:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JSS15J
ro.build.display.id=JSS15J.T999UVUENC2
ro.build.version.incremental=T999UVUENC2
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3
ro.build.date=Sat Mar 8 19:58:03 KST 2014
ro.build.date.utc=1394276283
ro.build.type=user
ro.build.user=se.infra
ro.build.host=R0210-18
ro.build.tags=release-keys
ro.product.model=SGH-T999
ro.product.brand=samsung
ro.product.name=d2tmo
ro.product.device=d2tmo
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use
ro.product.device
ro.build.product=d2tmo
# Do not try to parse ro.build.description or
.fingerprint
ro.build.description=d2tmo-user 4.3 JSS15J
T999UVUENC2 release-keys
ro.build.fingerprint=samsung/d2tmo/d2tmo:4.3/
JSS15J/T999UVUENC2:user/release-keys
ro.build.characteristics=tmo
# Samsung Specific Properties
ro.build.PDA=T999UVUENC2
ro.build.hidden_ver=T999UVUENC2
ro.build.changelist=1962493
ro.product_ship=true
ro.chipname=
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
persist.hwc.mdpcomp.enable=true
debug.compbypass.enable=1
debug.hwui.render_dirty_regions=true
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
debug.mdpcomp.maxlayer=3
#
# system props for the cne module
#
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/
OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/
UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.feature=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default
on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# system property for Bluetooth Handsfree Profile
version
#
ro.bluetooth.hfp.ver=1.6
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in
incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote
initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability
time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=1
# System property for Default touch key light
duration
ro.button_key_light=1500
#
# System prop for sending transmit power request to
RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
ro.sf.lcd_density=320
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# System proverty for sys info indication
persist.radio.add_power_save=1
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
# System prop for SPN
persist.radio.prefer_spn=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-
opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.hdcp2.rx=tz
ro.sec.fle.encryption=true
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=CLEAN_Tmo_Jingle.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.error.receiver.default=com.samsung.receiver.err or
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.crypto.support=recovery_mount|others
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=off
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-hms-tmobile-us
ro.com.google.clientidbase.am=android-tmobile-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.3_r1
ro.build.selinux=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
persist.gps.qc_nlp_in_use=0
What can I do to make work mi wifi, bluetooth and camera.
Thansk a lot.

Sounds like another one of these.
http://forum.xda-developers.com/showthread.php?t=2672790
If you got UVUENC2 running on there either by kies or odin then at least the motherboard is a T999. Im wondering if maybe you got mixed components from whoever sold it to you.
Check the imei and sn against the sticker under the battery.
Sent from my SM-N900T using Tapatalk

DocHoliday77 said:
Sounds like another one of these.
http://forum.xda-developers.com/showthread.php?t=2672790
If you got UVUENC2 running on there either by kies or odin then at least the motherboard is a T999. Im wondering if maybe you got mixed components from whoever sold it to you.
Check the imei and sn against the sticker under the battery.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Thanks, exactly, i forgot coment, the IMEI and SN is not the same that the numbers that appears in Settings.
I discover this when i change the display, and kies flash until i wrote i747m and serial in Kies flash t-mobile rom.
Other thing that i forgot, when i flash the fhon in download mode, don appears the progress bar, in others models that i have always shows the progress at the same time in odin, and in this case only odin shows the progress.
Thanks

I would contact the seller for an explanation before going much further, especially regarding the imei.

DocHoliday77 said:
I would contact the seller for an explanation before going much further, especially regarding the imei.
Click to expand...
Click to collapse
I tried contact the seller but i don´t have any answer, for this i try to make work wifi, camera and bluetooh.
What else can I do?
PD; The phone is unlocked, and works to make and recive calls.

Find the thread in general that hss the dialer codes and use that to check the cameras firmware version. Then grab an ATT rom and see if there is a corresponding file in the cameradata folder and copy it to yours. (Or you could try just copying the whole folder to see if it works).
If that doesn't work, I'm not sure what else to tell you...

DocHoliday77 said:
Find the thread in general that hss the dialer codes and use that to check the cameras firmware version. Then grab an ATT rom and see if there is a corresponding file in the cameradata folder and copy it to yours. (Or you could try just copying the whole folder to see if it works).
If that doesn't work, I'm not sure what else to tell you...
Click to expand...
Click to collapse
I flahs drivers camera and doesn´t works, I root and flash recovery TWRP, i was reading that maybe need to flash a different kernel, the question is what kernel you recommend me to flash to try to work the hardware.
Thanks

Stock kernel is all I use. Kernel thread is in General section. All you can do is try a few and see.
You said you flashed the camera driver? What exactly did you fo and what did you flash? Did you use the dialer code to check the cam firmware version?
When in download mode does it show the model?

DocHoliday77 said:
Stock kernel is all I use. Kernel thread is in General section. All you can do is try a few and see.
You said you flashed the camera driver? What exactly did you fo and what did you flash? Did you use the dialer code to check the cam firmware version?
When in download mode does it show the model?
Click to expand...
Click to collapse
I used this code:
*#34971539# Camera Firmware Update
based on this thread
http://forum.xda-developers.com/galaxy-s3/general/jb-4-1-2-camera-driver-t2006128
Cause this was my case
Rear Camera ZDFE02
Phone FW ZDFI02
After flashing
Rear Camera ZDFE02
Phone FW ZDFE02
But doesn´t works

In /system/cameradata, do you see SlimISP_ZD.bin? Or something to that effect...
Rear camera is the firmware version currently being used by the camera. Phone FW is the firmware loaded on the phone along with the rom or device firmware. So initially, what was on the phone was newer (this is normal btw). We used to be able to write the newer fw from Phone to Cam ourselves, but Damsung patched against that in 4.1.2.
In other words, whst it says for phone and rear cam do not need to match. Just make suure you have that ZD file in the cameradata folder.

DocHoliday77 said:
In /system/cameradata, do you see SlimISP_ZD.bin? Or something to that effect...
Rear camera is the firmware version currently being used by the camera. Phone FW is the firmware loaded on the phone along with the rom or device firmware. So initially, what was on the phone was newer (this is normal btw). We used to be able to write the newer fw from Phone to Cam ourselves, but Damsung patched against that in 4.1.2.
In other words, whst it says for phone and rear cam do not need to match. Just make suure you have that ZD file in the cameradata folder.
Click to expand...
Click to collapse
The file that you say is in cameradata folder, i don´t lnow whats the matter, and why don´t work the camera, bluetooth, & wifi.
Thanks