http://www.amazon.com/gp/product/B008KP4ZFI
Anyone seen this?
I ordered one, because i was looking for quick insertion/quick removal (and i needed something that would accept the thickness of the 4200MAh hyperion battery w/case). I have to admit, it surprised me. Not only does it hold the s3 complete with the largest battery to date, but it holds it even over HARD bumps. (disclamer: my car is on racing coilovers, and there more than a few places of horrendous bumpiness on the way to work).
To make it work like an iBOLT (for my purposes) i have a usb cable ziptied to it (so i still have to plug it in like an iBOLT, and the wires are routed inside my dash for a relatively clean install), and since i bluetooth to my car, instead of audio in, I made a profile on tasker, that when it sees my alpine EX-10, it switches to carmode (as in what the iBOLT and other OEM chargers do), turns the volume up , turns on GPS, etc... and switches back when I leave. only thing is, i have to turn on bluetooth for it to work (but i do that anyway).
and the metal plates you need to make it mount? they fit perfectly inside the case, between the case and the phone.
This looks very interesting, and I've been looking for a car mount recently. Any way you could post up some close up pictures of the part that holds the phone? It looks like a suction cup device, which makes me pretty skeptical of its effectiveness when used with a case that doesn't have a smooth surface for it to attach to.
Herp derp SGS3 Tapatalk 2
I don't how many people who still use their cd player, but if you don't, this mount is amazingly effective:
http://www.mountek.com/
I have been using it on the S3 now for a while and works flawlessly.
pizz0wn3d said:
This looks very interesting, and I've been looking for a car mount recently. Any way you could post up some close up pictures of the part that holds the phone? It looks like a suction cup device, which makes me pretty skeptical of its effectiveness when used with a case that doesn't have a smooth surface for it to attach to.
Herp derp SGS3 Tapatalk 2
Click to expand...
Click to collapse
it is not a suction cup. it is a rubber foot, with neodymium magnets embedded. (hence the metal plates it provides.) the magnets hold the plate, and rubber foot keeps it from sliding, or scratching your phone. i will get a pic or 2 at lunch.
ipaq_101 said:
I don't how many people who still use their cd player, but if you don't, this mount is amazingly effective:
http://www.mountek.com/
I have been using it on the S3 now for a while and works flawlessly.
Click to expand...
Click to collapse
I looked into that, but my CD player drops these 2 locks over the slot (mitsubishi factory 6 disk changer) and would not allow the insertion of the mount.
ipaq_101 said:
I don't how many people who still use their cd player, but if you don't, this mount is amazingly effective:
http://www.mountek.com/
I have been using it on the S3 now for a while and works flawlessly.
Click to expand...
Click to collapse
Would this mount hold the phone in horizontal position and what is the maximum size the mount opens up too.
I need something for quick insertion/quick removal as well
Related
If you haven't tried or seen the Mountek MT5000, you should take a look.
I ordered mine from Amazon for $20 shipped and have ben using it for a few days. I have to say this is one amazing mount. Not only does it fit in the CD slot, but any slot you have anywhere. Using mine at my desk at work and in the car.
Great idea.
Check out a small write up on GoodandEvo
http://www.goodandevo.net/2011/01/mountek-mt5000-mounts-htc-evo-in-cars-cd-player-slot.html
I have one in the car and love it.
thinking about getting another for work.
I got mine about 2 weeks ago, and I love it. I have the Ballistic HC case, and it still fits in the mount. I never thought about using it at work for other slots.
that thing looks awesome, i think i'll be investing in one of these soon
Guys, get this mount. This is the mount to end all mounts. It is so awesome. It installs in like 10 seconds flat. You put your phone on there and just squeeze to clamp it down. It rotates to portrait or landscape, and you can turn the phone to face you if you need to.
I'd been using it for a while with the CD slot, and then today I discovered that it was even more awesome installed on the vent because now I don't even have to look down. The guy who invented this thing is a genius. The only thing better than this mount, in my opinion, is the Palm Touchstone, but that doesn't exist for Evos. :-/
I also think that this mount is great. Such a clever design and the customer service at mountek is really good too.
FYI - You can snip out a gap on the removable bottom mount to make room for a charging cable
very cool idea, and I would free up the vent I am currently not able to blow on my face for this summer lol.
mrquaid said:
I also think that this mount is great. Such a clever design and the customer service at mountek is really good too.
FYI - You can snip out a gap on the removable bottom mount to make room for a charging cable
Click to expand...
Click to collapse
Actually, you can remove the bottom altogether if you want to ... it's removable and pops right off. I've found it unnecessary as the mount grips my Evo just fine in portrait or landscape without it.
My take on the mount
With all the glowing reviews here I'm somewhat hesitant to chime in but:
- if you are thinking this mount is in any way specific to the EVO- it's not; it's a generic sort of think which uses two pads and pressure to hold the sides of your phone.
- while the bottom bit of the holder can be removed, it's essential to do so because your charger will not fit into the phone with it there. It's WAY too much of a pain to remove the phone from it's case just to use this mount and I can't see using the phone without an extended battery.
- if you have an extended battery or a case the mount will basically not work- you may get it "in there" but the phone will be on the edge of the rubber pads and pop out on the first bump or when you try and use the phone (pressing on screen or trying to wake it up with the power button
- they do offer a money back warranty but as with most things these days it would cost me so much in shipping to send it back it's not worth the hassle but I'm sorry I got the thing- useless for my purposes and didn't work for my wife's EPIC either and not just because there's aren't provisions for the slide- it wouldn't hold her phone securely at all and she's caseless with stock battery.
TLDR: maybe a good idea but much flawed in execution. I'd return it if it was cost effective.
I see reviews that state that it works with the extended battery and case, which is perfect for me!
Does anyone know if you can swivel it left and right to change viewer angles?
wasnt said:
... but any slot you have anywhere...
Click to expand...
Click to collapse
WAT?
10chars
tutruong89 said:
I see reviews that state that it works with the extended battery and case, which is perfect for me!
Does anyone know if you can swivel it left and right to change viewer angles?
Click to expand...
Click to collapse
Yes it swivels a bit -- not much but enough to give you a good viewing angle from the driver's seat. You can also rotate it to portrait or landscape depending on your preference.
I have one with an extended battery and it fits fine. Bumps don't knock it loose. I only have to place it a little farther then the middle so it doesn't press the volume buttons.
Sent from my PC36100 using Tapatalk
I don't know what the other guy is talking about, I have the extended battery and case and mine ddoesn't pop out. I'm actually very pleased with it. I did remove the bottom bracket.
I've been waiting for this product to be re-stocked. Apparently, they've been sold out for a while now. Pre-ordered it in May and it finally arrived this weekend. So far so good! Fits my Droid Incredible but the charge port is blocked unless I remove the support bar. The side arms seem to hold snugly without it, but I'll have to shoot them an email and ask about that. Also looks like they've made some mods. The CD blade looks slightly different than the product photo and the tightening wheel is now smaller. I feel pretty good about this purchase. Build quality is higher than I expected. Seems durable too. We'll see how it continues to perform with time...
*****
Wow, I sent them an email and already got a response: "The device rest [support bar] is optional/detachable, and in most cases, the mount can hold your phone without it." So I guess I'm good.
Looks nice, but does it do any damage to the inside of the player? anyone have problems with the player trying to take it as a cd? this might be a great solution for my element.
Sent from my PC36100 using Tapatalk
ghostyroasty said:
Looks nice, but does it do any damage to the inside of the player? anyone have problems with the player trying to take it as a cd?
Click to expand...
Click to collapse
The Mountek MT5000 does not damage the CD player at all.
The blades never touch any part of the disc loading mechanism. It only fits into the slot opening where you then turn the knob just enough to spread the blades to gently hold the MT5000 into place.
If you still have CDs in the player, they can still be used too because the MT5000 doesn't engage any of the player's CD eject or load functions.
would this mount work for the evo 3d?
Sent from my PC36100 using XDA Premium App
It should work for the Evo 3d with no problems.
How many turns is everyone giving the tightening rod? The guy in the video gave it like two turns.. I'm cranking mine a few times.. And it can keep turning, but I thought it might be enough
I bought one a while ago, feels a bit cheap in terms of build quality but it does work as advertised.
I use my charger cable to loop and lock the phone in
Hi, just wanted to give a quick impression of 2 windshield mounts I ordered.
http://www.amazon.com/Arkon-Univers..._1_3?s=wireless&ie=UTF8&qid=1305654075&sr=1-3
http://www.amazon.com/Arkon-IPM515-...Holder-Compatible/dp/B003Z4L68S/ref=pd_cp_e_2
Overall they both work OK. I much prefer the "Universal Mount" just because of how the Slim Grip opens/closes. The Universal is a squeeze style close with a button release. The Slim Grip you have to push the lower part down to open it, and the same to get your phone out. Kind of a pain.
Plus, even though the Slim Grip seems to be OK in Landscape...it still scares me not having a physical piece there to hold it up in case the spring force isnt enough.
I am using the Slim Grip as a vent mount (using the vent mount supplied with the Universal) and the Universal as a Windshield mount. So far the suction cup on the Universal seems very strong and I have not worried about it coming down.
One thing I noticed on the Universal that is a bit annoying, when the unit is fully opened and you are driving it rattles. This is remedied by simply closing it 1 or 2 clicks (which still allows you to put your phone into it without opening it back up).
I have the same Universal mount but with the frictionless pad. How do you like the Vent mount though in the terms of removing it? I got scared away from it because the reviews had that the two clips to hold it in place easily break.
Ordered the Universal yesterday, should have it tomorrow. I'm curious to see how well it works with the extended battery, but I like the idea of mounting it to the vent. Can't wait to get it regardless though, since the other one I have will only work with the stock battery.. Grrr..
I had a mount similar to the universal mount here (different brand) that I grew to loathe quite a bit because it rattled with no device in it. I didn't put my phone in it every time I got in the car and this bothered me greatly. I'm glad I avoided that universal mount because I would not tolerate that at this point.
The second mount (that you have to push down on the lower part to insert device) is the one I use now. It doesn't bother me how it functions and it is quiet. It grips well enough that you shouldn't worry about it slipping, and the extended clips make it work great for this phone without needing a huge stretch on the cradle to insert the phone.
I got the universal mount yesterday. Love it so far. Haven't noticed any rattling, but I may not either unless I switch vehicles. Keeps the phone secure though, and it works nicely with the extended battery in place (no case yet).
I do kinda like the looks of that other one too. Maybe I might order it for the wife and try it out. Not sure how often she'd use something like that though...
frankspin said:
I have the same Universal mount but with the frictionless pad. How do you like the Vent mount though in the terms of removing it? I got scared away from it because the reviews had that the two clips to hold it in place easily break.
Click to expand...
Click to collapse
Hi, I do not have much experience with this yet as this mount is in my wife's car.
The vent mount clips do seem a bit flimsy...especially since I am using it on the "slim" mount. With the universal I wouldnt worry too much because of the button release, squeeze in. You arent putting much if any pressure on the clips.
But with the slim mount...I have a feeling these could break on me down the road.
Those clips are definitely flimsy. Solved the problem though: rather than use the clips, I pulled that other piece off and cable tied it to my vent. Solid, and not moving.
Obviously, it does no good if you switch vehicles, but for that I will use windshield mount then.
Sent from my ADR6350 using XDA App
Just wanted to update on my "hack" for the vent mount. Been very solid so far. I have some concern over the longevity of the cable ties, but honestly, it's a very minor concern. Very little movement of the phone, great location being on the air vent (especially in the summertime, keeps it cool).
I can post pics if anyone wants to see, but I'm glad I went that route. Leaves the windshield mount available for when I'm in a company vehicle or my wifes car.
Do any of these after-market mounts activate the car panel app? I've seen how you can find and run it through the HTC universal search but is there any other way to activate it (like with a magnet on the OG Droid)?
jesand83 said:
Do any of these after-market mounts activate the car panel app? I've seen how you can find and run it through the HTC universal search but is there any other way to activate it (like with a magnet on the OG Droid)?
Click to expand...
Click to collapse
Not with a magnet. My gut is that a resistor or something is what's required. Check this thread:
http://androidforums.com/htc-droid-incredible-2/350066-there-anyway-trick-dinc2-into-car-mode.html
Hey guys,
So im still wondering which one is the best car mount for me...my car has limited spots where to put it but I got this as a gift so cant complain hehe
I made a review as I always do with my products
Hope this helps you choose the right one for you
http://youtu.be/x8XNr7A91j0
Does the mount scratch up the bezel of the phone?
did u make this review? i don't see the phone being removed from the dock. that's my only issue with the dock. it's not that easy to take the phone off.
vw671 said:
Does the mount scratch up the bezel of the phone?
Click to expand...
Click to collapse
No,
the way the phone goes in you dont have any hard contact with the bezzel and also its ruberized on the corners. The back part of hard plastic but there is no movement of the phone so scratches will be minimal..Be sure of course to check for hard particles before putting your phone
dn3g3l said:
did u make this review? i don't see the phone being removed from the dock. that's my only issue with the dock. it's not that easy to take the phone off.
Click to expand...
Click to collapse
Yes , this is my review ..In the first part of the review when I put it in the table you can see me putting it in and out IIRC.
Indeed taking it out is not the easiest task as it is plugged into the charging port, however the benefit of it is the fact that you are minimizing cables and wires . When you pull out the part of the charger the removal is easy and the suction cup is strong enough to keep it in place
I rather it be locked in securely tho..However, as I explain on the video, there are better options out there with more mobility and same performance
i'm pretty sure removing the phone from the cradle got cut off. i saw you put the phone into the cradle 2 or 3 times but not removing it. just wanted to know if you have to push back on the tab really hard to kinda pop the phone out from the top part. everytime i try removing it, it seems like i'm not doing it correctly and will break it.
rault18 said:
Yes , this is my review ..In the first part of the review when I put it in the table you can see me putting it in and out IIRC.
Indeed taking it out is not the easiest task as it is plugged into the charging port, however the benefit of it is the fact that you are minimizing cables and wires . When you pull out the part of the charger the removal is easy and the suction cup is strong enough to keep it in place
I rather it be locked in securely tho..However, as I explain on the video, there are better options out there with more mobility and same performance
Click to expand...
Click to collapse
What are the better options out there for car mounts for this phone?
thanks
Did he say 49.99 or 14.99?
49.99 plus tax
Thanks for the review I went ahead and ordered one from Amazon $34 shipped.
dn3g3l said:
i'm pretty sure removing the phone from the cradle got cut off. i saw you put the phone into the cradle 2 or 3 times but not removing it. just wanted to know if you have to push back on the tab really hard to kinda pop the phone out from the top part. everytime i try removing it, it seems like i'm not doing it correctly and will break it.
Click to expand...
Click to collapse
oh im sorry well to be honest pushing was not that hard..yes there is resistance but not necesarely hard just be sure you are moving the bottom away first so the charging port doesnt go on an angle..the click you hear is more of the plastic getting in place than the charger getting in. It was slightly harder than removing a regular car charger. Just be careful when pushing the tab back and try to do it straight . The removing process should be exactly the opposite of the inserting one
$50 for a mount is too much. Although I love the phone and Google Navigation a lot, but it does get quiet hot while on GPS and charging at the same time. I will stick with my Garmin GPS.
Nice!
Great review! Thanks!! Saved me $50. This mount would have been a huge dissapointment for me and I was super close to getting it today. It's not like Samsung to skimp out on looks and functionality!?!
CincoDeDrinko said:
Great review! Thanks!! Saved me $50. This mount would have been a huge dissapointment for me and I was super close to getting it today. It's not like Samsung to skimp out on looks and functionality!?!
Click to expand...
Click to collapse
glad I was able to help! there are better ones out there..I will be trying to review some as well ..just waiting to purchase some hehe
I just dont understand why did samsung used so much plastic in the wrong parts!
It serves me perfectly.
The OEM Car Mount serves me really well.
I modified it with a vent mount because I did not want to install it to the glass.
After I put it to the vent, it works really well. It stays firmly even if I operate while I am driving. I do not have any problem to put or take out the phone from the mount even thou my phone has Ghost Armour Black Carbon.
Of course I have to use a force a bit to the tap, but no trouble to me.
After I got the mount, I have not used Garmin 1450LMT at all, so finally I sold it. The Car mount is the most useful accessory that I've purchased for the phone. I paid around $33 for the OEM mount & $2.50 for the vent mount from Amazon.com.
PS. Please excuse the dust in the vent. I was surprised when I saw the pictures. I think I need to detail the car very soon.
very well done sir! I like your custom mount option! The product is rock solid..however in my case I just needed more flexibility
I'm really digging the OEM navigation mount. Works wonderfully if attached to the windshield. But completely useless as a dash mount, don't know why they even give you the dash "puck" as there is not way in hell you can adjust it as a dash mount (*at least in a 4Runner).
But the BEST thing is the line-out capability in car mode!!! IT'S AWESOME!!!
I tried most phone mounts for the car and did not like them. I don't like the window mount as it obstructs your vision and leaves circles inside the front windshield. It is also too far away to touch the screen/phone as you drive. I didn't like the vent mount because during the hot Summer days, you have one less AC vent blowing at you. I recently bought the CD player slot mount and I LOVE IT! It places your phone a lot lower than the vent mounts and it fits a wide variety of phones. It is also more discrete to motorists around you and its way closer/easier to touch the screen. You just place your phone on it and squeeze the sides until it locks. Then you can tilt it to landscape, tilt it back and forward, and tilt it towards the left or right. When you are done, you just press the top rear and it opens up. It will fit our phone and even the Galaxy Note. Oh yeah I had to buy this as my 4.5" screen Samsung T989 did not fit my old vent mount that fit my G2X. I bought mine from a vendor through Amazon. Check out the 4.5 star rating from 134 customers. Its $19.95 with Free shipping.
http://www.amazon.com/Mountek-MT500...W3D4/ref=sr_1_1?ie=UTF8&qid=1325492429&sr=8-1
Is there a mount that I can place down by where the gear is? I don't want windshield or dash because they obstruct my view. I don't want vent mount because I need my vents for air conditioning and it's still a bit high. I can't do CD mount like the guy above posted because my cd slot is behind my built-in GPS which flips out to put CDs in.
Can anybody recommend a good mount or would any dash mount work for that situation. I'm thinking maybe putting it in the cup holder or nearby.
Here's my custom effort:
After trying several car mount, I almost give up
http://www.amazon.com/Kensington-Qu...BEV4/ref=sr_1_1?ie=UTF8&qid=1332967645&sr=8-1
This is the one I am currently using. However, the lower part of the holder always touches the power down button, which mutes the GPS!
What car mount do you use?
ssoonngg123 said:
After trying several car mount, I almost give up
http://www.amazon.com/Kensington-Qu...BEV4/ref=sr_1_1?ie=UTF8&qid=1332967645&sr=8-1
This is the one I am currently using. However, the lower part of the holder always touches the power down button, which mutes the GPS!
What car mount do you use?
Click to expand...
Click to collapse
Just use a big binder clip. It's super cheap and works better than any holder I've tried from eBay.
http://lifehacker.com/5747897/how-to-build-a-car-mount-for-your-cellphone-from-office-supplies
I use the Samsung Car Dock for the GS2/Infuse 4G. I've removed the little cover for the micro USB port and the Samsung dock works perfectly; charges and keeps my Nitro HD secure.
SolusCado said:
I use the Samsung Car Dock for the GS2/Infuse 4G. I've removed the little cover for the micro USB port and the Samsung dock works perfectly; charges and keeps my Nitro HD secure.
Click to expand...
Click to collapse
Thanks for the hint! I am going to get one.
LG phone with Samsung Dock
996gt2 said:
Just use a big binder clip. It's super cheap and works better than any holder I've tried from eBay.
http://lifehacker.com/5747897/how-to-build-a-car-mount-for-your-cellphone-from-office-supplies
Click to expand...
Click to collapse
Is our Nitro HD too heavy to be hold by the "thin" holder?
ssoonngg123 said:
Is our Nitro HD too heavy to be hold by the "thin" holder?
Click to expand...
Click to collapse
Nope, my Nitro HD + TPU case works fine with a 2" binder clip in a Honda Accord. I've used it as a GPS on 4 hour drives and it was much more stable than a windshield-mounted holder with a flexible arm.
ssoonngg123 said:
Thanks for the hint! I am going to get one.
LG phone with Samsung Dock
Click to expand...
Click to collapse
I know; who'd have thought?
This isnt the exact same one i purchased, but it looks extremely similar to it. The padded arms that hold the sides or the top and bottom (you can rotate it while its mounted) are individually adjustable so its easy to position them out of the way of buttons while leaving the buttons fully accessible, and the phone secured perfectly.
It comes with two attachments, one allows you to hook it to your heater vents and the other is the window mount.
The window mount is not very long, but very sturdy! This is what i currently use in my car. The vent mount is very nice and sturdy, but it seems its meant to permanently attach to the vents. I first tried to use it since it keeps it out of my window area, but because of the way my vents are setup in my car, it pointed the phone in a bad direction and there's no left-right adjustments that you can do other than the normal movement from the room available from the clips, so upon trying to correct it, the two mounting clips broke and its no longer usable.
Either way, it works out perfect! But again, the one listed is only close to the one i purchased. I picked that one to list though because its from radio shack, where i purchased mine. I went out to the car and there's not a single branding label on it anywhere! crazy..
http://www.radioshack.com/product/index.jsp?productId=3386930#
996gt2 said:
Just use a big binder clip. It's super cheap and works better than any holder I've tried from eBay.
http://lifehacker.com/5747897/how-to-build-a-car-mount-for-your-cellphone-from-office-supplies
Click to expand...
Click to collapse
That's just ghetto...Ghetto FABULOUS!!
Just so happens the big binders and strong rubber bands are items available at my work supply closet! The only thing better than a DIY project is a DIY project with parts you can get for free!
996gt2 said:
Nope, my Nitro HD + TPU case works fine with a 2" binder clip in a Honda Accord. I've used it as a GPS on 4 hour drives and it was much more stable than a windshield-mounted holder with a flexible arm.
Click to expand...
Click to collapse
Namuna said:
That's just ghetto...Ghetto FABULOUS!!
Just so happens the big binders and strong rubber bands are items available at my work supply closet! The only thing better than a DIY project is a DIY project with parts you can get for free!
Click to expand...
Click to collapse
Namuna, have u or anybody else here tried the modified binder clip? I'm currently trying to make one, but I realize that the "arms" seem to be a bit too short to hold it in place. Either it will slip of the top arm or the bottom one every now and then. I've curved them slightly more upwards to give it more of a hold, but it doesn't seem to wanna hold. I wonder if we replace the body of the binder clip with a smaller one and just use the longer arms whether it will work better?
996gt2, would you mind posting a pic or two to show how it looks with yours? Mine just seems to barely hold it, and constantly slips off the arms.
I've found that the Garmin Nuvi 200 mounts like this http://www.ebay.com/itm/Car-Windscr...ers_Mounts&hash=item3a6b7428f1#ht_1996wt_1163 work great with no modification with my body glove dimensions case on, easy to slip the phone in and out of it.
I've also used this same mount on my previous phones with slight modifications (Motorola Photon 4g and Samsung Captivate) which involves using a lighter to melt the sides to the right size.
Also this one looks like it would do the trick http://www.ebay.com/itm/GENUINE-ORI...ers_Mounts&hash=item1c2690c51d#ht_11995wt_905
0mfgroflmao said:
I've found that the Garmin Nuvi 200 mounts like this http://www.ebay.com/itm/Car-Windscr...ers_Mounts&hash=item3a6b7428f1#ht_1996wt_1163 work great with no modification with my body glove dimensions case on, easy to slip the phone in and out of it.
I've also used this same mount on my previous phones with slight modifications (Motorola Photon 4g and Samsung Captivate) which involves using a lighter to melt the sides to the right size.
Also this one looks like it would do the trick http://www.ebay.com/itm/GENUINE-ORI...ers_Mounts&hash=item1c2690c51d#ht_11995wt_905
Click to expand...
Click to collapse
So r u currently using that very Garmin nuvi mount? And it holds the phone nicely and stably? I find that sometimes these mounts lean sideways when I have both power n 3.5mm jack plugged in. If u r using the mount pls take a pic of the phone in the mount so I can see how well it holds it. For that price, if it works well, I'd rather go with that. I'm spending way more already with the DIY mount clip lol.
Sent from my LG-P930 using xda app-developers app
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
Thanks, never seen one that slides into the CD slot. Btw...that link said for iPhone 4S.
SamsungVibrant said:
Any suggestions?
Click to expand...
Click to collapse
http://www.slipgripcarmounts.com/Galaxy-S-III-I9300_c_27331.html
And chose one for you. I've ordered this one http://www.slipgripcarmounts.com/Sl...Using-OtterBox-Commuter-Case---_p_130841.html yesterday cause I've had the same one for my Fascinate for almost 2 years. Perfect fit and very good quality.
Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
That's really cool!
Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
That looks really cool. Does it go it and out of the CD player easily? Do you just leave it there or is it easy enough to quickly plug in when you want?
Does it still "see" the satellites well enough from the lower position in the car?
I assume you can confirm the GS3 fits well in it even though it says it's for iphone?
Anyone know of other CD mounts to compare to?
Amazon review for this one you got are generally very good.
http://www.amazon.com/Mounteks-Universal-Hands-Free-Devices-Magellan/dp/B004E5W3D4
Best car holder I've ever had!
Don't know if people just don't know about these or just don't like them. I got mine back in February and used it on my old E4GT and now the S3, I absolutly love it! The key is, for me anyways, getting a TPU case( always use TPU so no biggie there ) take an exacto knife and cut a perfect sized cut out for the tiny magnet. If you do it correctly the looks isn't bad at all( use the small magnet, works fine for me ) and more importantly it wont 'wobble' on the table, lays flat. Sorry don't have any pics of my old setup and haven't cut out my new one yet. Also, nice that we have replaceable back covers in case you're worried about it marring up the back if you want to remove it later.
As far as construction quality, magnet hold strenght both are superb, haven't hadd one inceidentl fall off the holder. Also magent doesn't seem to interfer with wifi or cell at all. NFC I haven't tested yet, but my suggestion would be to mount it towards the top side of the case away from the battery( like were the carrier logo is on the back )
Anyways just my 2 cents, check out youtube they have a couple good reviews of it on there.
http://eshop.tetrax.us/
I can't post pics/links but I followed Lifehacker's guide to making a car mount out of office supplies (site should be easy to find with that information). It works surprisingly well, even with the size of the S3 and the fact that my vehicle's vents aren't perfectly suited for the application. I thought it'd be kind of ghetto but it's hidden while in use and easy to remove and stash away when not in use.
I'll make a thread with pics once I have enough posts.
I got this one: http://www.amazon.com/SLIM-GRIP-WIN...CAR-STEREO/dp/B004H4FN6Q/ref=cm_aya_orig_subj
http://forum.xda-developers.com/showthread.php?t=1769055
Take your time and look around. There's plenty of car mounts that will fit this phone with a case.
Seems like most are the suction cup kind
will work for any phone even tablets
Sorry long time forum reader but first time posting. I can't post a link but search "soundgate m2 car mount"
You can probably find them cheaper. Used my for the og dinc for 2 years. I put the disc on my case instead of the phone. But I would have no reservations to put it directly on the phone as the disc is extremely unobtrusive. Just clean the spot you want to mount the arm really well with included wipe or rubbing alcohol. The arm mounts with a 3m adhesive pad and folds almost flush when not in use. Very slick. Put the discs on anything you want to dock to the arm. I forget how much weight it can handle but I saw a tablet being used as well. Sorry tried to upload pictures and after an afternoon of searching the forums on how to do it, i still cant get it. Just google "soundgate m2 car mount" you wont be dissapointed.
I have this one. I love it. Works with any case, holds tight. I have mine in the vents. http://www.breffo.com/collections/spiderpodium
lynseyw said:
I have this one. I love it. Works with any case, holds tight. I have mine in the vents. http://www.breffo.com/collections/spiderpodium
Click to expand...
Click to collapse
That looks interesting, never seen that before. How do you put that in your vent? Looks like it wasn't designed for that.
SamsungVibrant said:
That looks interesting, never seen that before. How do you put that in your vent? Looks like it wasn't designed for that.
Click to expand...
Click to collapse
you just kinda put it in the vents, and then bend it down. works great! It really stays put too. Check out the gallery section on the site, there are other pics of it in the vents. Got one for a friend and he loves it. It really does hold tight in the vent, even more so then ones designed for the vent. Easy to take out too
lynseyw said:
you just kinda put it in the vents, and then bend it down. works great! It really stays put too. Check out the gallery section on the site, there are other pics of it in the vents. Got one for a friend and he loves it. It really does hold tight in the vent, even more so then ones designed for the vent. Easy to take out too
Click to expand...
Click to collapse
Can I order if I live in the U.S.? Also I don't see the gallery.
lexluthor said:
That looks really cool. Does it go it and out of the CD player easily? Do you just leave it there or is it easy enough to quickly plug in when you want?
Does it still "see" the satellites well enough from the lower position in the car?
I assume you can confirm the GS3 fits well in it even though it says it's for iphone?
Anyone know of other CD mounts to compare to?
Amazon review for this one you got are generally very good.
http://www.amazon.com/Mounteks-Universal-Hands-Free-Devices-Magellan/dp/B004E5W3D4
Click to expand...
Click to collapse
It goes in very easy. It only takes a few seconds to install. It holds the S III securely even with a case on it.
Here's a video:
http://www.youtube.com/watch?v=B8uy-XfhEqQ&feature=related
Maverick777 said:
It goes in very easy. It only takes a few seconds to install. It holds the S III securely even with a case on it.
Here's a video:
http://www.youtube.com/watch?v=B8uy-XfhEqQ&feature=related
Click to expand...
Click to collapse
Does it hold the phone in the vertical position, or only horizontal?
RubenRybnik said:
Don't know if people just don't know about these or just don't like them. I got mine back in February and used it on my old E4GT and now the S3, I absolutly love it! The key is, for me anyways, getting a TPU case( always use TPU so no biggie there ) take an exacto knife and cut a perfect sized cut out for the tiny magnet. If you do it correctly the looks isn't bad at all( use the small magnet, works fine for me ) and more importantly it wont 'wobble' on the table, lays flat. Sorry don't have any pics of my old setup and haven't cut out my new one yet. Also, nice that we have replaceable back covers in case you're worried about it marring up the back if you want to remove it later.
As far as construction quality, magnet hold strenght both are superb, haven't hadd one inceidentl fall off the holder. Also magent doesn't seem to interfer with wifi or cell at all. NFC I haven't tested yet, but my suggestion would be to mount it towards the top side of the case away from the battery( like were the carrier logo is on the back )
Anyways just my 2 cents, check out youtube they have a couple good reviews of it on there.
http://eshop.tetrax.us/
Click to expand...
Click to collapse
wow that's nice! Why did you have to cut out a hole in your case, the link says it comes with a case (I'm assuming with the magnet attached)!
SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
ProClip. It is a little more money, but well worth it. I would get the proper mount for your vehicle (vent or side mount) and the adjustable phone mount so you can use it with a case. The also make a clip so you can move the mount from car to car.
Sadly, mine was recently stolen, but they offered me a discount because of my loss.
So I created a ghetto version as a sort of joke in exchange.
http://m.youtube.com/watch?v=jH3XoLqfXsY
www.proclipusa.com
SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
I use this one and I love it.. http://www.amazon.com/MSW-Exogear-Exomount-Universal-Mount/dp/B004Z8ZLOS/ref=sr_1_1?ie=UTF8&qid=1342868939&sr=8-1&keywords=exogear+car+mount