Just to demonstrate the power of Steam, I hereby provide you a Steam Powered Gingerbread
This is based on SC's idea of using /data to store the gingerbread files, which works even if FSR is not loaded.
I also went forward and fixed the keyboard issue, so now the home, back and menu buttons work as expected! Oh, and also added recovery mode (running steam recovery of course ), that can be opened using the ususal three button combo. ("adb reboot recovery" or similar will not work however)
What still doesn't work:
- Wifi
- Modem (3g and phone)
- Camera
- Gps
Installation:
1. Download the system dump from here, and put the file on the root of your internal SD card
2. If not already on ext2 or ext4, convert your /data partition to ext4. (because the next step requires Steam Recovery, I'd go with Steam kernel, if your current one doesn't support ext on /data)
3. Download the afterburner install files from here
4. Create a steam directory on your internal sdcard, and put the previously downloaded file there. If there are other afterburner*.zip files there, delete them.
5. Enter Steam Recovery (there are multiple ooptions on how you can get it), choose afterburner, select both options, then press "Install". This will take a while. You might want to switch to log window 1, where you can see the /system extraction progress
6. After finished, reboot. Gingerbread will boot up.
7. If asked to install Steam kernel you can do so, but first read note.
8. Enjoy. To switch back, flash any kernel. If you want your old data back, flash a kernel with ext4 support.
9. If you switched back to a "normal" kernel, you can use afterburner to get back to gingerbread too. Only select the second option when running afterburner, and on the next reboot, gingerbread will greet you in a state as you've never left it.
Note: A steam kernel installation requires you to reboot into recovery after installing it. On base Galaxy S ROMs this is done automatically, but gingerbread's kernel lacks the commands needed to programmatically reboot into recovery. Therefore it will always reboot into normal android mode, where he finds out that he needs to reboot into recovery, but boots into normal mode, etc... to exit this loop simply reboot into recovery manually (using the three button combo), to finish installation of Steam Kernel. You will be greeted with the afterburner window, press back without selecting any of the options (they won't work anyway), and you're done.
Alternate install: Of course you don't need afterburner to install this. Simply follow the instructions on supercurio's page, but use the kernel found inside afterburner.zip, instead of the one provided on the mentioned thread. /data needs to be converted to ext4 though.
Source:
Steam Kernel: https://github.com/SteamMOD (all directories starting with android_bootable_steam_ / tag 2.9.9.1)
Fixed kernel: https://github.com/SteamMOD/steam_kernel_ns_on_galaxys
Initramfs: https://github.com/SteamMOD/steam_initramfs_galaxys/tree/master/ns-on-sgs-i9000
You can compile it by yourselves using the Android Compiler VM 2.0 with the compiler scripts found here
Not exactly following you on how to install the Steam Kernel. Do I need to pull the battery at some point? If so, when? If not, what am I supposed to to do manually get it into recovery mode? No matter what I do I am always greeted with "Steam doesn't seem to be installed, or it was recently uninstalled." etc.
Nice work, you lift up the level of this forum
Some x-mas beer for you :16T35690B39571910
This is awesome!
Happy x-mas
74W90842E13524051
Great job, will play with it ...
Thx a lot for your work ! -> 1VL15892XA210614G
you are awesome. just awesome.
i have a vibrant. But i lurk here to keep an eye on development.
Great very interesting indeed. May I know wats working and wats not? Thx and gd work!
Sent from my GT-I9000 using XDA App
Amazing. i will pay you the 2011 Sziget if that works. lol
Hmmmm nothing happens when I choose "Install" in afterburner menu.. It seems to be instant. Just like it didn't found the install file.
I named the folder "steam" at the root and put the afterburner.zip into it though..
Edit: Okay I'm f***** stupid, didn't check the two options. It works now.. really sorry
Edit2: It seems like I'm stuck in steam recovery. Everytime I reboot I get this message : "Partition /res/.fake/gingerbread/cache could not be mounted!"
The "format partition to ext4" function doesn't seem to work as well. Same for the proposition of installing Steam kernel..
I had my /data partition formatted in ext4 via voodoo though.
So basically, whatever choice I make, it'll never boot... Do I have any other solution than a flash with odin to get something working ?
huge work, and it works !
well done
Awsome, my Hungarian friend! It's not a slogan: you are really the best.
Sent from my GT-I9000 using Tapatalk
Can anyone report on what features work/ don't work. Will be real helpful for those willing to try it out. Thanks!
Ehm....ehm....but...what is Steam????
zat81 said:
Ehm....ehm....but...what is Steam????
Click to expand...
Click to collapse
steam is much more powerfull than CWM ... already intruduced in this forum ...
respect and nice work though
Yeah seems very nice. However I'm interested what's working and what not. Can please someone who already flasht this thing provide.me an answer?
Sent from my GT-I9000 using XDA App
Karupan said:
Can anyone report on what features work/ don't work. Will be real helpful for those willing to try it out. Thanks!
Click to expand...
Click to collapse
Ya would really like to know eagerly too
Sent from my GT-I9000 using XDA App
Is this a working gingerbread port with wifi,... ?
Sent from my GT-I9000 using Tapatalk
PhilAd said:
steam is much more powerfull than CWM ... already intruduced in this forum ...
respect and nice work though
Click to expand...
Click to collapse
Where can i read something about?
And what about a small vid like supercurio did, if it is possible ? would be very nice
What is it and why am I getting this prompt? I'm rooted with 2.3.4
Obviously I shouldn't accept this update but does anyone know what this is?
Sent from my Xoom using xda premium
Hi. I am new.
I just installed the ROM 2.3.4 last night that was posted in the xda forum(upgraded manually from 2.2 on a Unrevoked rooted Dinc).
I installed the 4.06 ROM and I am reading the official was 4.08...
Do I need another upgrade? Or is this 'the' upgrade that is for root users?
Not trying to steal your post ugxvibe. both of our questions might have similar answers.
if you update will you lose root control? What about all the apps? I'm most concerned about not being able to tether...
Just flash wildstangs 4.08.605.2 ota rom. It is the newest ota update, but already rooted.
how do I do that? Through rom manager?
Is there a way to stop the update reminder from popping up without actually installing it? I'm afraid I might mess up my phone and don't want to risk losing everything g on it.
Guys, to stop the prompt from appearing just press install and it will try to reboot but will just error and u will never see it again trust me .
Sent from my HTC Droid Incredible using xda premium
d-pabs said:
how do I do that? Through rom manager?
Is there a way to stop the update reminder from popping up without actually installing it? I'm afraid I might mess up my phone and don't want to risk losing everything g on it.
Click to expand...
Click to collapse
Yes thru rom manager.
You can dissable the notifications by editing your /system/build.prop file. Look for:
ro.config.htc.nocheckin = 0
and change the 0 to a 1. If you dont see that line add it somewhere in the file.
I went to make the nocheckin = 1 modification, but I already had it, and I'm still getting the update notifications. Not even sure how it got there. All I've done is root with Unrevoked, maybe that does the edit?
NetGoo said:
I went to make the nocheckin = 1 modification, but I already had it, and I'm still getting the update notifications. Not even sure how it got there. All I've done is root with Unrevoked, maybe that does the edit?
Click to expand...
Click to collapse
It should have worked, you may need to clear the cache partition. Or there is another method go to /etc/security and rename otacerts.zip to otacerts.zip.bak
Like what was said above...
If you have Clockwork or some other custom recovery, if you just allow it to update when prompted, it will not install and will cause no other problems. You must have the stock recovery in order for the update to install.
It CANNOT install if you don't have the stock recovery.
But, I would also go into the /cache directory and find the update file and zap it (It will be obvious). I just use ADB and "rm" it from my PC. You could use root explorer or something. Otherwise you will have a big update file just sitting there and hogging space.
cmlusco said:
It should have worked, you may need to clear the cache partition. Or there is another method go to /etc/security and rename otacerts.zip to otacerts.zip.bak
Click to expand...
Click to collapse
I found the file thru root explorer but cannot change it due to message that says it's read only. other options?
Thanks.
bgtruitt said:
I found the file thru root explorer but cannot change it due to message that says it's read only. other options?
Thanks.
Click to expand...
Click to collapse
At the top of the screen in Root Explorer, change r/o to r/w. Then make your change.
Sent from my ADR6300 using xda premium
im rooted n using the clockworld mod for roms, I attempted to run the 4.08 update from User wildstang following the instructions but after installing the update n rebooting it just sits at "Dorid incredible" white screen and never boots. I may be doing something wrong here, can someone break it down for me? suggestions?
NOTE: I use CWMR 5X. Some wipe options below are not included in earlier recovery versions. Still wipe what is available the best you can.
1. Put the Rom on the root of your SD Card
2. Compare MD5 Sum
Windows: MD5 Calculator
LINUX: Open Terminal and type: md5sum [path to the rom on your sd card]
Mac: Open a terminal and type: md5 [path to the rom on your sd card]
3. Reboot to Recovery
4. Wipe these:
Main Screen:
wipe data/factory reset - x2
wipe cache partition - x2
Advanced:
Wipe Dalvik Cache - x3
Wipe Battery Stats - optional
Mounts and Storage:
Format-
/boot - x2
/system - x2
/datadata - x2
/data - x2
/cache - x2
5. Install Rom from SD Card by going back and selecting install from SD card.
6. Reboot and enjoy!
followed each step to the letter but still wont boot : /
Ok i changed nothing in the method of installing the rom and for whatever reason it worked!! 4.08 now phone is 10X faster and im loving it. Only issue i see now is i cannot get back into clockworld mod! why is that? i hold down power and vol down for a long time and when release it just starts the boot sequence any suggestions?
clutchdroid said:
Ok i changed nothing in the method of installing the rom and for whatever reason it worked!! 4.08 now phone is 10X faster and im loving it. Only issue i see now is i cannot get back into clockworld mod! why is that? i hold down power and vol down for a long time and when release it just starts the boot sequence any suggestions?
Click to expand...
Click to collapse
Uncheck fastboot in menu > applications.
Thank you sir.
clutchdroid said:
Ok i changed nothing in the method of installing the rom and for whatever reason it worked!! 4.08 now phone is 10X faster and im loving it. Only issue i see now is i cannot get back into clockworld mod! why is that? i hold down power and vol down for a long time and when release it just starts the boot sequence any suggestions?
Click to expand...
Click to collapse
I had the same problem, but after two times running the install its still getting the hang. Hopefully I'll get better luck on try #3.
Did you figure out what caused the temporary issue?
spitzaf said:
I had the same problem, but after two times running the install its still getting the hang. Hopefully I'll get better luck on try #3.
Did you figure out what caused the temporary issue?
Click to expand...
Click to collapse
I may have missed a format inside mounts and storage make sure you hit them all.
cmlusco said:
Yes thru rom manager.
You can dissable the notifications by editing your /system/build.prop file. Look for:
ro.config.htc.nocheckin = 0
and change the 0 to a 1. If you dont see that line add it somewhere in the file.
Click to expand...
Click to collapse
OK I've found the file you're talking about and it doesn't have that line in it so I need to add it. I can't easily get access to a computer right now to run the command line on my phone so i have been trying to use the terminal emulator instead. It says I doesn't have a text editor...is there a way to edit via the emulator? Do you wkno which commands to use?
Thanks again
Yep, still having a minor issue with this. I have added the line suggested and I have cleared my cache yet I still get periodic prompts to install the update. I'm not really keen on doing so. Can anyone else suggest a way to stop the (weekly) prompts?
Thanks
Since the information for this device is so fragmented, I decided to attempt to keep it all in one (or a series of) posts. I aim to link to the original posts as well as outline what do to with your device from the time it leaves to box to running the latest and greatest modified rom or CM9 or whatever else is out there. I will not link directly to anything, rather I will link to the thread, and I very seriously recommend reading at least the post, if not the thread, before you begin ANYTHING.
This guide is a work in progress, it is not complete, and I will work on it bit by bit until it's completed!
Section 1: So its shiny and new...how can I MOD IT?
This will be assuming the new shiny toy in question is indeed an Acer Iconia Tab A100, this is not meant to cover any other devices. And, this is assuming it's coming with Honeycomb installed, in stock form. If its used, or comes with ICS, the next section will amuse you.
First thing most users that want to mod their devices do is root their device. Now, rooting is not unlocking, as carrier unlocking is not boot loader unlocking. Rooting a device allows you to access the system in a much more in depth manner, including read/write (R/W) access to the /system partition, among other things. It allows use of programs such as Titanium Backup (TB or TiBu) ROM Toolbox, overclocking or other clock setting utilities such as SetCPU or CPU Master for overclocking (if the kernel supports it) underclocking and undervolting.
So...how do I do that rooting thing? Well assuming you are running Honeycomb and are wanting to update to ICS plus root and unlock the bootloader, we will use the info from this thread Simple Root Method by ZeroNull to update you to ICS and then gain Root access on that new ICS install!
What about rooting Honeycomb? Well most users are already running ICS and prefer it, and those on Honeycomb are likely wanting to update to ICS, so I will leave this out for now. If I have the time I will come back and include the link for that as well.
Now, ICS is installed, and you're rooted, what else can I do? Well you can unlock your bootloader, and load up a custom recovery such as CWM or TWRP and using those, install Custom ROMS! For this, we visit this thread here Install unlocked bootloader by ZeroNull. Follow ALL directions in this thread for a fully unlocked bootloader!
Custom recoveries, what are they and how do I get that shiz? Custom recoveries, CWM and TWRP, allow the user to flash anything they want, provided its for their device and properly packaged. This included custom roms, some tools, and allows you to "wipe" various parts of the device's storage and backup/restore to a previous installation. Powerful, and dangerous, do not go pushing buttons to things you do NOT understand! Also, you MUST delete or rename /system/etc/install-recovery.sh prior to flashing recovery! This will restore stock recovery every time android boots, wiping out your custom recovery. The only time you want that file there is if you are using the crossix mount swap mod, which replaces that file with a modified version that leaves recovery alone.
Safe to do wipe:
Wipe cache, data, dalvik cache, system. Theonew also reports Flex and boot can be wiped as well as SD-EXT. This is not to be confused with External SD, this is a separate partition on your External SD card, wiping it will NOT wipe external SD, only what's installed on that partition, the rest is safe and requires a separate wipe.
If you wipe system you MUST install a new rom or restore from backup!
If you wipe boot please restore or install a new ROM before rebooting! Safety first.
Not safe to wipe:
Don't wipe anything else, and always install a new rom or backup after wiping system!
Never reboot system after wiping without first restoring or installing a new ROM!
Post 2 will cover custom recovery functions in more detail, for both recoveries.
Now that you have an unlocked bootloader, what can I do? Install that custom recovery! There is two flavors, CWM and TWRP, CWM available here CWM Recovery by ptesmoke. Follow the instructions in this post to the letter! Only attempt this after you have ICS, rooted, and unlocked the boot loader correctly! Next we have TWRP Recovery here TWRP Recovery by ZeroNull. Again, follow the instructions to the letter, and attempt only after ICS, root and unlocked boot loader are finished.
Ok, gots me some custom recoveries, what about custom roms? This is why we just did all that work, to prepare for this! Custom ROMs! I'll be listing some (all?) ROMs that you can use, besides stock HC and ICS.
The list in order of version, oldest to newest, updated to retired:
4.0.3
KEBBERSROM by Hardslog Stock based 4.0.3
Flex Reaper by civato ICS 4.0.3 Modified Stock
Green ICS by lgcmn & ZeroNull ICS 4.0.3 Modified Stock
4.0.4
KEBBERSROM SHELLSHOCK by Hardslog 4.0.4, based on A500 and A700 ROMs
Nightly Builds of CM9 by pio_masaki ICS 4.0.4
Aoikaze Modified CM9 by pio_masaki ICS 4.0.4
4.1.1
CM10 Preview builds by waydownsouth 4.1.1
4.1.2
Unofficial CM10 builds by pio_masaki (stock and modded, Phone UI and Tablet UI)
Jellytime Sosei by pio_masaki Jellybean 4.1.2
Cyanosaki_Flex by Hardslog
4.2.2
CarbonROM JB 4.2.2 Unofficial by pio_masaki
These are most of the ROMs. There are others that seem to no longer be in active development and are based on the old leaks that vache was kind enough to grab for us. Development is currently only active in the KEBBERSROM builds by Hardslog, and occasional updated in the CM10 builds by pio_masaki.
That ends Section 1, preparing for awesomeness, and Post 2 will continue with installing your new custom ROM!
Section 2: Recoveries and what they can do for you.
This section will cover recoveries and what they can do, and how to do it. I will be starting with TWRP, as I use that on all of my devices, and after that I will include a CWM section, as a lot, if not most, use that. They are similar in what they do, but different in where things are.
TWRP Recovery
Official TWRP for A100 by linuxsociety
This assumes you have already done everything in section 1, including installed ICS, rooted it, unlocked your bootloader, and installed TWRP custom recovery. Links for this information is provided in Section 1, in the post above.
First thing you should ALWAYS do when you enter recovery, before doing ANYTHING ELSE, is make a nandroid backup!
Getting into recovery: Depending on what ROM you use, this is done a couple ways. First is an AOSP ROM, like CM9/AOKP, which you can hold the power button, then select Reboot, then Recovery. In modified stock or rooted stock ROMs, this menu doesn't exist, you can either use an app like Quick Boot, and select recovery, or power off, then hold the Volume - key (closest to the rotation lock switch) and while holding it, hold power, once the acer screen comes up and starts saying Recovery kernel, release both and recovery will boot provided an update.zip is NOT on the root of your external SD card. This method works for any ROM.
Now I'm in recovery, what do I do? As I mentioned, make a nandroid backup before you do ANYTHING else! From the first screen (home screen) in TWRP select Mount. In mount you can leave everything alone and at the bottom will be two options with Circles. Select Using external SD Card for Backup. This will store your backup on your external SD card, never use internal SD if possible. After you select use external SD, press the Home button in the upper right corner. Now, back on the Home screen, select Backup. Double check the boxes checked are System, Data, Boot and Recovery. At the bottom is a nice little slide bar, slide that over and sit back. Takes about 4-5 minutes depending on how full your device storage is. This does NOT backup internal SD! After this is done, you have created a nandroid backup that when restored will put the system exactly how it was last time you used it. You can make multiple backups of multiple ROMs without issue, just however big your SD card is to hold them.
The restore menu, or the OOPS SAVE MEH menu is your best friend. This will restore you back to the last state your device was in for the backup that is restored. By default TWRP saves by date and time, however you can rename this with any file manager, never caused me any issues. Theonew reminded me of an MD5 issue that can happen on renaming backups, if this does happen, rename it back to the stock naming system to fix it. Generally I'll just append the ROM name to the front, so instead of 2012-6-14--18-25-01 it'll be CM9-2012-6-14--18-25-01. Make sense? That way to restore it in case of error, just drop the name. Easy. Theonew also did some testing, and confirmed that spaces in the folder name WILL cause MD5 errors and fail the restore, please use ONLY dashes and underscores (- and _ lol) in the folder name! To restore make sure you are on the Home screen, then select Restore. In the window you will see a list of your current backups, select one. Next screen has check boxes, make sure System, Data, Boot and Recovery are checked, then slide the bar to begin. This takes a bit, make sure you let it finish! Once done, your system will be at the last point it was used for that backup.
Advanced restore...I'm to lazy to reload and reset up my stuff after a ROM flash, so this is the fast and dirty way of doing it. If you flash a ROM and you don't feel like manually restoring your apps, you can uncheck System, Recovery and Boot, and leave only Data checked. This will restore your user installed apps and settings over the current ROM install. I don't recommend this for different ROMs, only for updates of the same ROM! Up to you but if you get alot of issues, you'll know why. After advanced restoring, go to the Home Screen and select Advanced, then Fix Permissions. Press Home again and select Wipe. Wipe Cache and Dalvik Cache, then reboot system.
Alright, enough already lets get our flash on! From the Home screen, select Wipe, then press on Cache, Dalvik Cache, Factory Reset, and System. Optional you can wipe Battery Stats if your battery seems off. Leave the rest alone. Once these are all wiped, go back to the Home screen, and press Install. The window on the left is your device folders, window on the right is contents of the current folder. I hope you remembered where your rom.zip is, because you select it here. Press on the zip for the ROM of your choice, then slide the bar to flash it. After that is done, select the left button Wipe Cache and Dalvik, then select Reboot system.
OK LETS ROCK THAT ROM! Woah, slow down scooter, there's a few things to do, or not do, first. After it boots, meaning it's past the boot animation and is sitting on the Welcome screen, set it down and leave it alone for 10 minutes or longer. Don't sign in, don't do anything, just leave it be for 10 minutes. If you can't think of what to do to manage the time you have to wait for awesomness of custom ROMs, read the thread of the ROM you chose. Set the thread for 50 posts and just read. After 10 minutes, hold the power key, and either choose Power off or Reboot, Reboot depending on ROM used. After it finishes rebooting (that was alot faster wasn't it?) you can go ahead and do the Welcome stuff, log in to Google, setup your device, download your apps, restore your apps etc. After restoring your apps (try not to restore app + data if possible, though I know games and stuff you'll want to) reboot one more time. After that second reboot, use the tablet as normal. From my experience this offers the BEST possible ROM usage, a vast reduction in lag, bugs, and oddness.
What else can I do with the TWRP Recovery? Well, the most useful tools are Backup, Restore (and advanced restore) and the wipe menu, plus fix permissions. Those generally can fix anything thats wrong. If you notice alot of lagging, FCs or general unruliness, wipe Cache, Dalvik Cache, and Fix Permissions. Another useful ability is ADB, which is beyond the scope of this section, but may be included generally in a later section. ADB can be used to repair otherwise bricked devices, and offers a very large amount of tools that you don't normally get to use in Recovery. Keep in mind ADB is powerful, and can quickly destroy your device, so please, be careful using it.
Placeholder for CWM Recovery section - coming soon!
CWM Recovery for A100 by ptesmoke
Section 3
Additional Recovery tools:
Blackhole Wipe/Nullifier by pio_masaki
These are tools I created to make wiping a little easier, but please read the post completely before deciding to use it! There are multiple versions, and they can and will wipe internal SD, as well as take up to 40 minutes to run (1, not all). Please ask questions if you have them there and I will help as best I can!
AROMA Recovery Touch Recovery
A touch file manger to be used in recovery, even on non touch CWM! Good for renaming backups as soon as you make them (I tend to forget afterwards and get confused by 6 backups with just dates). Also moving a downloaded zip from internal to external or whatever before running a system wipe, any number of things. Please read the post completely before using this tool! It can cause damage if not used properly and with care!
Kernels:
linuxsociety / godmachine's A100 OC Kernel
Plenty of extra balls thrown in for good measure, a good place to look if you like high benchmarks and plenty of extra goodies baked in. Available in a few flavors, with some GPU OC thrown in for good measure.
ezterry's A100 OC/UV Kernel
The only other option for a kernel that we have besides stock and CM9's included kernel. Excellent kernel, really wakes up the A100, allows up to 1.5 GHz for some extra umph and undervolting to help conserve power on our very weak batteries.
PRO TIPS:
The 10 minute rule:
The reason I mention waiting 10 minutes on first boot of a ROM install is this: Alot of things happen the first time the ROM runs, alot of scripts run, the kernel has to settle and search and move things, files are flying all over the nand. Think of a tornado in a cubicle. That's first boot for your device. Allowing it 10 minutes uninterrupted allows all of that to happen and settle down. The following reboot lets all that new info fire up from it's new home and continue settling in. After restoring and downloading apps, that reboot allows that new info to settle into it's new home and the system to catch up. This isn't device specific, rather a general rule of thumb for all devices. Does not really apply to restores unless something is changed.
Undervolting:
Undervolting on this device is only available on ezterry's excellent kernel. The following is a rough guideline of how to do it, and do it right:
Start small, don't just dump it -200 and expect it to work. For the time you're testing, make sure it is NOT set for boot. If something goes wrong you don't want it doing it everytime it boots, right? Go in small increments, -25 is usually OK. For now, don't overclock. Starting at 1 Ghz, lower every speed range down -25, and run the device for at least 10-20 minutes, normal use, hard use, benchmark, browse the web, watch a HD movie. If all is fine and its not lagging, freezing, force closing or heating up more then usual, move everything to -50, and repeat. My device freezes at -150 but runs stable at -145. Every device and chip is different, mine may do -145 yours may do -175 or only -50.
Overclocking
Overclocking is available on ezterry's bodacious (already used excellent) kernel, up to 1.5 GHz, and the CM9 kernel up to 1.4GHz. As with undervolting, this should be done in small steps and tested between to find your max. Generally 1.5 GHz is fine for every device, however all devices and chips are slightly different, and some may not be stable at it. Mixing undervolting and overclocking can be tricky, but following the steps above for undervolting you can find that sweet spot for your device.
Batteries and why they fail
This section is entirely my opinion, other's swear one way, other's another, but this is what I've concluded from multiple posts for this device.
Consider 10% to be 0%. There have been more then a couple posts that say they let their battery fall below 10% and they can NOT get the device to work properly again afterwards. I think there's a few reasons for this, and I'll explain them now. First, a lot of batteries tend to have some kind of breaker protection if the voltage drops below a certain level. This is to prevent damage to the cells, which it does, however we can't close that breaker to restore activity from the battery, IE, it's dead anyways. This threshold varies from one device to another, one battery pack to another, some can go to 0% and be ok, others can't. I say voltage level, because while draining the voltage can spike up, and it can also spike down, which can fall below this threshold even though it says you have 5% battery life remaining, and trigger the protection.
The acer does not seem to power on without a working battery. If the battery is "dead" it doesn't seem to boot. Its basically a brick until either the battery is replaced (by acer I would assume) or the motherboard is replaced due to some sort of damage causing this. Replacing the motherboard costs almost as much as a new unit, so at this point, just save up some more and buy a new one.
For this, I never go below 10% if ever possible. Even on my phones.
Another thing I try not to do is charge in bursts, or at random times. Basically, I plug in at 10%, then allow full charge to 100%, I don't charge in between those ranges, and I don't charge for periods less then 100%. So I don't plug in at 48% then unplug at 60%. I've learned this one from my Evo 4g, the battery was fantastic for months, then I started using the car charger to top off, and the battery life over the course of 2 weeks took a very noticable hit on overall life. I lost easily 4 hours a day usage on it. This on a phone and ROM combo that got me 16 hours a day.
Again this entire section is just what I've noticed and is purely my opinion, please do whatever you please with your device, it is yours after all!
ADB and Fastboot...is it really a faster boot?
No, fastboot isn't a toggle to boot at warp 9. Fastboot is a mode you can put your bootloader into for flashing the system for upgrades, repairs, mods, or general havok if you're not careful. The bootloader is what you see when you first turn on your device, that lovely Acer logo with the text up in the left corner (usually saying bootloader version and Unlocked Mode if unlocked, or nothing if it's locked). If you go into fasboot, it will say download usb protocol, so if you see that, you're in fastboot mode for whatever reason.
How do I get into fastboot mode?
Well you can do this in a couple ways, either Quickboot app (reboot bootloader), if you're on CM9, the power menu will give the option, or you can use ADB for it.
adb reboot bootloader
I'll explain some more about adb after fastboot, I know its odd, but one does have something to do with the other at times.
Once you've rebooted to the bootloader (device will turn off, vibrate, then boot to acer screen) you can then issue your fastboot commands assuming 2 things:
Acer USB drivers are installed and working correctly (if you use adb to reboot, then it is)
Your tablet is connected to your PC over USB.
Now, at this point, its up to you to do whatever you want, but BE CAREFUL USING FASTBOOT FLASH! It doesn't care or check what you're flashing, it'll just flash it. For example, I flashed CWM Touch recovery to boot once because I was distracted and mixed up the images for whatever reason. End result: Can't boot android. Why? Because boot was recovery, it only booted to CWM Touch recovery. Booting to actual recovery booted to TWRP, which was my previously installed recovery. I got it back easy enough once I figured out what I did wrong, but not all mistakes are reversible, or fixable!
General Fastboot uses and commands...
general layout goes like this:
fastboot (this is calling the command) flash (this is what fastboot will do) recovery (where it will send it to) recovery.img (the file it will send)
So, it looks like this:
fastboot flash recovery recovery.img
it will then flash whatever img to whatever partition you said, and let you know when it's done. You can flash any img to any partition, provided it fits, which means you do have to be careful about what you flash to where!
when you are finished with fastboot:
fastboot reboot
There are plenty of other commands, but the general basic use of fastboot is to flash a recovery or bootloader, so that is what I laid out above.
This section is hugely in need of improving, I know, but the guide in general is still rough, my apologies.
What about ADB?
ADB, or Android Debugging Bridge, can be used in System or in custom recoveries to interact with the device behind the curtain, meaning what you do isn't readily apparent on the device itself, unless you do something obvious like reboot it. ADB has a ton of commands, in particular in ADB Shell mode (you drop into the device shell itself, issuing commands from within itself, not from the PC).
Some random ADB commands:
adb reboot (where to reboot to) so:
adb reboot recovery
adb pull (what file to copy) /(where to copy file to) so for example, a recovery log to the adb working folder:
adb pull /cache/recovery/last_log recovery.txt
adb push /(file to copy to) /(file to send to device) so for example, placing that recovery file back into the device:
adb push recovery.txt /cache/recovery/last_log
Thats all the time I have for now, sorry in advance, I'm still working on all of this, I swear lol
Placeholder for additional tips and usage, some ADB stuff, and anything else I can think of.
Placeholder for Toubleshooting.
Placeholder for FAQS.
System Modding
justjackyl's Iconia A100 CM10 Setup & Use Tips/Tricks
A good guide to check out to try to get the most out of your A100 on CM10 (or any JB ROM like Sosei/black bean). A must read for those new to CM10/JB on these devices or in general. Not an outright mod, but a good source of information about some modding you should browse.
Hulu Flash Hack by NoSudo
What the Hulu Flash Hack by NoSudo does is allow you to use our android browser (setup according to the thread) to watch sites like Hulu to play on your android flash player. Its basic function is to scan for, then backup, then place a modified libflashplayer.so file. Setup with script manager and run at boot for best results. As always, read the thread for more information.
Mount Swap by crossix
What the Mount Swap by crossix does is pretty awesome, it mounts your external SD as internal, meaning your 32GB external SD card shows as internal, and is used for your apps, data, downloads, whatever, as if it was your internal SD. Internal SD is then mounted as external SD. It's operation is based on install-recovery being replaced with crossix's version. Instead of replacing recovery, it runs the mount swap. Requires Root, as the file is placed into /system/etc. Designed for stock/modified stock ROMs, it can be used with AOSP/AOKP ROMs by using script manager and setting it to run as Root at Boot. Please read the thread for the files and information on how to use it.
Adapted to ICS Build Prop Mods by patrick_spd4u adapted from crossix
What the Build Prop mods do is pretty basic, however can greatly increase the abilities of the A100, including faster boot times, more apps/games available for download in the Play Store, and tons of other stuff. Adapted from crossix's mods for HC.
Guide to 2 ways of running the crossix mount swap script, Acer based and AOSP/AOKP based
Direct paste from a post I made about this earlier...details using ES File Manager, however you can adapt it for any root file manager.
Using your tab, download the crossix mod zip file.
Unzip the file to get your epic mount swap mod by crossix, it can be unzipped anywhere.
At this point, I'm using ES File Manager but you can use Root Explorer or whatever. I'll be giving directions for ES.
Go into settings, scroll down and check the box for Up to Root.
Scroll a little futher down, same menu, and check the box for Root Explorer. Tap Yes, then allow when SU asks.
Now check the box next to Mount File System.
A little notice should pop up saying system is writable. If it fails at this point, you'll need to reroot, though it should work fine.
Press back, and go to where your crossix install-recovery.sh file is, hold your finger on it, and select Copy from the menu.
Press back and keep pressing it until you get to /. You'll see folders like acct, cache, config, d, etc.
Scroll down to system, and tap on it to go into system
Tap on etc to enter the etc directory.
You should now be in /system/etc, check up top there will be the address bar showing where you are.
You shouldn't have an install-recovery.sh file there, but if you do, long press it and select rename, then rename it install-recovery.bak.
On the upper buttons, select paste.
Now hold on the install-recovery.sh and select Properties, all the way at the bottom of that menu.
Next to where it says permissions, click Change
You will get a new window showing 3 rows of 3 colums of boxes with Xs.
Check the boxes so it looks like this:
XXX
XXX
XXO
Click on OK, then OK again, you should be back to the main ES window. Go ahead and hit home, or hit back over and over to exit.
Stock or Modified stock ONLY
Reboot the device by whatever method you prefer.
Once it finishes booting, wait a minute, then check your Settings>storage and your external SD card should show as internal. You only need to do this 1 time, it will continue to do this after.
AOSP/CM9/AOKP ONLY
Go to the Play store and download Script Manager(smanager).
After it installs, open the app then select Browse as root, Allow when SU asks, then click OK.
It will likely be listing /mnt/sdcard as your default directory, press the folder with .. to go back up until it says /
Click on system, then etc
It should now show /system/etc
Find your install-recovery.sh file, and it will open a new window.
Pay close attention here!
Right under the buttons that say Run Exit Edit Save are some icons,
Fav Su Boot Net Wick Ntfy
Press on Su and Boot, then click on Save.
Now exit smanager and reboot.
Wait a minute, then check settings>storage and your external SD should show up as Internal.
Don't disable smanager from running at boot! If you disable it, your script won't run. smanager must remain installed, or the script won't run.
Thanks to:
ZeroNull: For being one of the pioneers for getting our devices cracked open for our amusement!
ptesmoke: Also for being a pioneer in getting custom recoveries on our devices!
vache: For releasing the ICS leaks way ahead of schedule and hosting them for us to use and abuse!
civato: For releasing his Flex Reaper ROMs on our devices, his modified stock ROMs are still (IMO) the slickest available!
da-pharoah: For helping me understand how recoveries work a little better, allowing me to create Blackhole Wipe/Nullifier, and general encouragement for creating things for this device! (G2x and KF forums)
ezterry: For creating an OC/UV kernel that so far is the best EVER for any ROM on our device!
Theonew: reading ALL of that, and providing some nice info I missed and left out, and catching typos (Almost made it...)
crossix: that mount swap mod is just awesome, I never run a ROM without it!
NoSudo: creating a method to easily modify the system to watch HULU and other sites that normally won't allow it!
There's more I'm forgetting, I'll be adding more as I remember, I promise.
Even though I knew everything you posted, it was very interesting and I recommend everyone (even if you don't need it or already know) to read this guide. Its a marvellous read with some humor to keep you going. One thing though:
- You stated that its only safe to wipe "cache, dalvik cache, data, and system". Technically, this is not true. Flexrom and boot partitions are also safe to wipe (and for some roms for certain devices, the boot partition must be wiped for stable kernel performance, etc.). It's also a good idea to wipe sd-ext if you have it set up (in most cases). Once again, excellent guide (you even did a part of my job ).
Theonew said:
Even though I knew everything you posted, this is a brilliant guide and I recommend everyone (even if you don't need it or already know) to read this guide. Its a marvellous read with some humor to keep you going. One thing though:
- You stated that its only safe to wipe "cache, dalvik cache, data, and system". Technically, this is not true. Flexrom and boot partitions are also safe to wipe (and for some roms for certain devices, the boot partition must be wiped for stable kernel performance, etc.). It's also a good idea to wipe sd-ext if you have it set up (in most cases). Once again, excellent guide (you even did a part of my job ).
Click to expand...
Click to collapse
While sd-ext is safe to wipe, using factory reset wipes that for you, and I think, could be wrong, but cwm does it on data wipes. Part of why I missed it was I confused it with my phone, where wiping sd-ext bricks the phone, and also people mix it up with external SD. I'll add it in as its a very valid point, and I shouldn't let personal things interfere with the guide.
As for boot, our devices don't need that wiped and honestly asks for problems if someone doesn't restore or install a rom to cover it. I've never wiped it on any device, however I will also add that in as it is good info. I left it out of "safe" to prevent possible issues from wiping it.
I forgot about flex and I honestly don't know what it is for lol. Again thanks for reminding me and I'll add it in.
Of course I'm open to posts like these please give some input on what I missed or need to correct, I want this to be the go to guide for the a100 for anything needed!
Tapatalked from my Galaxy S II.
pio_masaki said:
I forgot about flex and I honestly don't know what it is for lol....Of course I'm open to posts like these please give some input on what I missed or need to correct, I want this to be the go to guide for the a100 for anything needed!
Click to expand...
Click to collapse
In your 4th to last sentence of the "Advanced Restore" section, you have a typo . Anyways, according to here: forum.tegraowners.com/viewtopic.php?f=10&t=149, Flexrom is "a partition on the nand that acer made to hold some proprietary apks and build information".
Oh damn almost made it without a typo...not bad for just running through all of that without really checking on it..other then it was english.
Corrections and additions added to the posts, thanks!
pio_masaki said:
Oh damn almost made it without a typo...not bad for just running through all of that without really checking on it..other then it was english.
Corrections and additions added to the posts, thanks!
Click to expand...
Click to collapse
One more thing - This occurred for one of my other devices, but the problem may still exist here. I haven't tried it with TWRP, but renaming CWM backups can cause a md5 mismatch error to occur. If this happens, simply rename it back to a date (in the default format).
I've never ran into that issue on any of my devices in CWM or TWRP, however I have heard of it occuring, definatly something I should add in there. Full of good catches tonight aren't you?
Awesome write up, thanks you guys!!
What about Zeronull's .014 v1.2 rom? http://forum.xda-developers.com/showthread.php?t=1574897
I'm still digging through all the threads for the ROMs, however I included the currently developed or recently released ROMs first, ZN has since released Green ICS, which is included already. I do plan to list every ROM, but it'll take some time to finish this guide up with as much info as possible, then go back and add things in.
pio_masaki said:
I've never ran into that issue on any of my devices in CWM or TWRP, however I have heard of it occuring, definatly something I should add in there. Full of good catches tonight aren't you?
Click to expand...
Click to collapse
I tested it to see if it occurs, and it turns out that it does. I made a backup with CWM, renamed it then tried to restore, and it immediately gave me the "md5 mismatch" error.
Theonew said:
I tested it to see if it occurs, and it turns out that it does. I made a backup with CWM, renamed it then tried to restore, and it immediately gave me the "md5 mismatch" error.
Click to expand...
Click to collapse
That is so weird I never have that issue cwm or twrp. I use es file manager..maybe why?
Tapatalked from my Galaxy S II.
pio_masaki said:
That is so weird I never have that issue cwm or twrp. I use es file manager..maybe why?
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
I renamed it using Root Explorer. Have you tried renaming them to something including spaces?
Theonew said:
I renamed it using Root Explorer. Have you tried renaming them to something including spaces?
Click to expand...
Click to collapse
No, as its a Linux based environment I use dashes and underscores never spaces in directory names. That shouldn't cause md5 fails because the md5 is based per zip not the folder name. If you could try an experiment and rename with es I'd appreciate it, and maybe with and without spaces. I'll try root explorer when I get home and see if it causes issues.
Tapatalked from my Galaxy S II.
pio_masaki said:
No, as its a Linux based environment I use dashes and underscores never spaces in directory names. That shouldn't cause md5 fails because the md5 is based per zip not the folder name. If you could try an experiment and rename with es I'd appreciate it, and maybe with and without spaces. I'll try root explorer when I get home and see if it causes issues.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
Done. The error seems to only occur when spaces are used in the name.
Theonew said:
Done. The error seems to only occur when spaces are used in the name.
Click to expand...
Click to collapse
Thanks for taking the time to figure that one out, I've been testing a new rom on my phone plus a new test T20 kernel for ezterry and getting cm9 build 5 up, just kinda managed to forget that experiment lol
I'll have some time...maybe...to append that new bit into that section tonight. The "free" time has been spent trying to get aokp for the a100 but my lack of experience, random problems with the repos and devs ignoring my PMs its been going slow. And by slow I mean nowhere.
Tapatalked from my Galaxy S II.
Great read. Sorta like flashing for dummies. Thaanks for your work.
Sent from my HTC Glacier using Tapatalk
It's great to have all this information compiled in one location. Looking forward to your next installment. THX
Motorola Defy Mini XT320/XT321 all-in-one script/utility
I've ported mattlgroff's DROIDRAZR all-in-one Script to the Motorola Defy Mini XT320/XT321. This will make life easier and it will do it for you.
Make sure you have fastboot mode if not please refer to this guide for fastboot but there is a fastboot checker in option 6 but it won't install fastboot for you.
Link: http://forum.xda-developers.com/showpost.php?p=36199694&postcount=3
Options available:
1. Root your Motorola Defy Mini XT320/XT321
2. Install 2nd-init/TWRP Recovery
3. Overclock installation
4. Unroot Device
5. Wipe Data/Factory Reset
6. Fastboot checker.
7. Exit Utility
Instructions:
NEW PACKAGE & instructions
1. Download the EXE file at http://www.mediafire.com/?c81fnrtrki65e9i
2. Double click on the exe.
3. Choose an option by entering a number from 1 to 7
OLD PACKAGE & instructions
1. Download package at [REMOVED OLD LINK]
Please Download the fixed package at http://www.mediafire.com/?krxtemrthsz5ier
EXE Version: http://www.mediafire.com/?0kwmx4whjj1ua8c
2. Extract the zip file making sure all the files are in the same place.
3. Click on the batch file named 'DefyMiniUtility.bat'
4. Choose an option by entering a number from 1 to 7.
Credits to:
- Bernd.Defy for overclock module and Guitwo2 for init.d script
- Guitwo2 and jkkk88 for TWRP and aweosomeabhjeet for 2nd-init
- DoOMLoRD for unroot script
- Mattlgroff for the original DROID RAZR all-in-one script
If anyone knows if I missed a member for the credits, please PM me. Thanks
Make sure press thanks if it works
Guys please don't repost it as your own work, otherwise I'll report it and you will get banned from XDA.
NOTE: If you have previously used the old EXE to install TWRP then please remove the old folders by using these instructions using cmd before using updated exe to install TWRP;
1.
Code:
adb shell
2.
Code:
su
3.
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock11 /system
4.
Code:
rm -R /system/bootmenu
Then use the updated exe to install TWRP.
NOTE: If you don't like TWRP, you can download Guitwo2's Permanent CWM at http://forum.xda-developers.com/attachment.php?attachmentid=1875373&d=1365682716
Temporary CWM Recovery: http://forum.xda-developers.com/attachment.php?attachmentid=1875299&d=1365680458
2nd-init does NOT work in CWM Recovery
Thanks to @Guitwo2 for CWM Recovery.
Instructions on how to install Permanent CWM Recovery:
1. Make sure stericson-busybox is installed
2. Put XT320_bootmenuV2.zip in the root of your sdcard
3. Reboot into fastboot mode by typing this command in cmd:
Code:
adb reboot bootloader
4. Then type this command in cmd:
Code:
fastboot boot recovery.img
5. Then use volume keys to navigate and power button to select option. Select install zip from sdcard, then select XT320_bootmenuV2.zip and select yes to install the zip file
6. Then reboot device by selecting reboot device now.
CWM 6 has a bug where it asks you to 'disable recovery flash' when you select reboot system now make sure you select NO or you will soft brick your device.
Changelog:
-v2 No need to mount /sdcard in CWM Recovery. Fixed TWRP installation issues.
-v2.0.1 Released an .exe version of script, to simplify installation
-v2.0.1.1 Fixed bootmenu.zip
This can install a custom recovery?
This can install a custom recovery?
Thank you
The root process worked for me. Now i can install link2sd and set up a swap partition.
I cant install TWRP and i think the reason is that the bat was having some problem to send that bootmenu.tar file to my sd card. I tried to send that file myself before starting the entire process and it didnt worked.
I took a picture of the error i'm getting . Thank you again, i was really mad about that low internal space xD
same problem... someone can fix it? please
fca.sjc said:
The root process worked for me. Now i can install link2sd and set up a swap partition.
I cant install TWRP and i think the reason is that the bat was having some problem to send that bootmenu.tar file to my sd card. I tried to send that file myself before starting the entire process and it didnt worked.
I took a picture of the error i'm getting . Thank you again, i was really mad about that low internal space xD
Click to expand...
Click to collapse
sfoot13 said:
same problem... someone can fix it? please
Click to expand...
Click to collapse
Ok, I've made a fixed script here. The error was that the sdcard is a directory so it will refuse to push files into it.
Here's the updated script below. Just put the .bat file in the same place as the other files.
Thanks
rootdefyxt320 said:
Ok, I've made a fixed script here. The error was that the sdcard is a directory so it will refuse to push files into it.
Here's the updated script below. Just put the .bat file in the same place as the other files.
Click to expand...
Click to collapse
Ty for the quickly answer.
Btw, my gsm network wasnt working after the root process. If the same thing happens to someone else, just do a master reset and it will work again.
pull command is working now
That sdcard copy part is working now. The TWRP process is still not working for me. I tried to do myself the commands using the adb interface and when i use the command to intall the tar, i got the message 'tar: no space left on device" . I hope you can help me with that and i'm sorry about all this questions xD .
fca.sjc said:
That sdcard copy part is working now. The TWRP process is still not working for me. I tried to do myself the commands using the adb interface and when i use the command to intall the tar, i got the message 'tar: no space left on device" . I hope you can help me with that and i'm sorry about all this questions xD .
Click to expand...
Click to collapse
You must have more than 5MB free in your /system partition. Please move your apps to the /flex partition or delete the useless apps in /system.
rootdefyxt320 said:
You must have more than 5MB free in your /system partition. Please move your apps to the /flex partition or delete the useless apps in /system.
Click to expand...
Click to collapse
Thank u so much to everyone who make it possible xD
(can i do now a overclock to 720 without problems?)
sfoot13 said:
Thank u so much to everyone who make it possible xD
(can i do now a overclock to 720 without problems?)
Click to expand...
Click to collapse
Yes but it sometimes gets unstable so you should overclock to 700MHz which is the highest I got without reboots. pll2_l_val=73 gives you 700MHz.
rootdefyxt320 said:
Yes but it sometimes gets unstable so you should overclock to 700MHz which is the highest I got without reboots. pll2_l_val=73 gives you 700MHz.
Click to expand...
Click to collapse
Thank u so much and TWRP doesn't work xD i have 8.5 mb free on system but it can't create the folders on bootmenu
sfoot13 said:
Thank u so much and TWRP doesn't work xD i have 8.5 mb free on system but it can't create the folders on bootmenu
Click to expand...
Click to collapse
I've released an .exe version of my script. This should work now .
Link: http://www.mediafire.com/?0kwmx4whjj1ua8c
Thank u bro and sorry but i can't overclock it to 700 =/
i installed TWRP but it doesn't work and when i turn on my mobile it freezes on home screen :/ is a mess.... it's possible install it via recovery (temportal CWM)?
OFF TOPIC.
Congrats on your well deserved mention on the portal.
sfoot13 said:
i installed TWRP but it doesn't work and when i turn on my mobile it freezes on home screen :/ is a mess.... it's possible install it via recovery (temportal CWM)?
Click to expand...
Click to collapse
It worked for others but in your situation the only thing I can advise is to do a data wipe and relfash SBF file. Just go to Guitwo2's there to install permanent CWM.
Link: http://forum.xda-developers.com/showthread.php?t=2229233
rootdefyxt320 said:
It worked for others but in your situation the only thing I can advise is to do a data wipe and relfash SBF file. Just go to Guitwo2's there to install permanent CWM.
Link: http://forum.xda-developers.com/showthread.php?t=2229233
Click to expand...
Click to collapse
:good: Working! Thank u so much, now i have CWM working on my defy mini, i'm really thankful, thanks again
Hi, it's me again... i have a new trouble
i installed the xt320_bootmenu.zip (from this thread http://forum.xda-developers.com/showthread.php?t=2229233) the first time that i rebooted works fine, but the on the second reboot it doesn't work, then i went to data to check if test.log was there and here's the problem... no test.log...
init.d was working fine until that i did it, i guess that my phone have troubles making work init.d
some solution for this annoying guy? thanks in advance!
sfoot13 said:
Hi, it's me again... i have a new trouble
i installed the xt320_bootmenu.zip (from this thread http://forum.xda-developers.com/showthread.php?t=2229233) the first time that i rebooted works fine, but the on the second reboot it doesn't work, then i went to data to check if test.log was there and here's the problem... no test.log...
init.d was working fine until that i did it, i guess that my phone have troubles making work init.d
some solution for this annoying guy? thanks in advance!
Click to expand...
Click to collapse
Looks like 97bootmenu deleted itself, please reinstall the CWM zip again and it should work.
hi!
i installed the regulat 1.6 update to my FP1 and everything was just fine.
then I tried to install the "unified 1.6 update" which worked but the problems begun:
things I noticed:
1. backup ist not really a backup for the apps but just a way to reinstall the apps I had installed without any settings. not a fun way to find that out when reopening your apps.
2. the update to the 1.6 unifyed also messed with my SD card and deleted files and put new ones there. not something I was expecting. luckily I had a backup of the SD card.
the thing I am looking for a solution:
after merging the partitions I cannot acces the phone storage on my PC (mac osx 10.9.4). not directly as a drive. the android fil transfer tool works, but it does not have all abilities finder/explorere provides. how do I get acces to the phone storage again?
As all my settings are gone anyway I am open to reinstall the phone from scratch.
fivel_ said:
the thing I am looking for a solution:
after merging the partitions I cannot acces the phone storage on my PC (mac osx 10.9.4). not directly as a drive. the android fil transfer tool works, but it does not have all abilities finder/explorere provides. how do I get acces to the phone storage again?
Click to expand...
Click to collapse
Because of the partition layout it no longer is possible to expose the internal storage as mass storage device. Adb will work but the preferred way of transferring files is using the MTP protocol.
I am not a mac user but I think you need to install some additional software.
https://www.android.com/filetransfer/
_keesj said:
Because of the partition layout it no longer is possible to expose the internal storage as mass storage device. Adb will work but the preferred way of transferring files is using the MTP protocol.
Click to expand...
Click to collapse
thanks a lot, that is what I feared.
hi, i'm also have an upgrade problem: mine is that i can't upgrade at all.
i've repartitioned earlier with the app mentioned in the wiki (wiki/Fairphone_Fairphone/Guides#How_to_partition_your_Fairphone).
i've also done the steps _keesj descripes in thread "unified storage setup on re-partitioned FP1" ("Steps for "fiixing" your upgrade").
i'm having Cherry 1.6, and two 7 GB partitions.
does anyone has a solution?
see other (missplaced) post
This post might be of help:
http://forum.xda-developers.com/fairphone/general/unified-storage-setup-partitioned-fp1-t2834642
Donat.Callens said:
This post might be of help:
http://forum.xda-developers.com/fairphone/general/unified-storage-setup-partitioned-fp1-t2834642
Click to expand...
Click to collapse
thanks, i've read it again and tried _keesj's solution again, unfortunately it didn't solve my situation.
i'm a layman in this area, so probably i shoudn't haved 'played' with partitions at all (but with the app it was easy).
my previous post wasn't quite complete... i have had an unified partition before...
because of an app that didn't work, i used the repartition app again to see if that could solve the problem.
it did, but later i wondered if a wrong install in the unified sistuation was the problem... so i thought 'let's try the unified partition again'...
i thought i could simply re-use the Fairphone Updater...
so maybe i'm now having a unified partition divided in 2?
and lost the ability to ever upgrade to newer versions of the Fairphone OS?
i hope someone can help me...
jjjanssen said:
i could simply re-use the Fairphone Updater...
Click to expand...
Click to collapse
Make sure you allow it to reinstall the default recovery.
Donat.Callens said:
Make sure you allow it to reinstall the default recovery.
Click to expand...
Click to collapse
how do I allow it? i didn't get the question you've got ("ROM may flash stock recovery on boot. Fix?").
i downloaded Cherry 1.6 again and chose Install, gave it SU (forever) access, it automatically restarted to the Android with the text “Installing system update…” (no progress bar), and after a few minutes it restarted and nothing is changed. After starting the Fairphone Updater again, it immediately gave the Install option again. Same after selecting the Storage Upgrader.
I also tried restoring from the recovery (default, never replaced), from sd and adb (1.6 does install, 1.3 doesn't, and 1.6 partition upgrader doesn't either, gets aborted)…
Hi,
jjjanssen said:
how do I allow it? i didn't get the question you've got ("ROM may flash stock recovery on boot. Fix?").
i downloaded Cherry 1.6 again and chose Install, gave it SU (forever) access, it automatically restarted to the Android with the text “Installing system update…” (no progress bar), and after a few minutes it restarted and nothing is changed. After starting the Fairphone Updater again, it immediately gave the Install option again. Same after selecting the Storage Upgrader.
I also tried restoring from the recovery (default, never replaced), from sd and adb (1.6 does install, 1.3 doesn't, and 1.6 partition upgrader doesn't either, gets aborted)…
Click to expand...
Click to collapse
Non unified images have a different signature. The moment you use the partition upgrader it will change the accepted signature and will no longer allow older images. If all is as I expected your running image is still the parition upgrader image and it contains the tools to perform the last step of the re-partitioning (e.g. calling the script and performing a recovery with format).
If you want to know what is going wrong with the zip install check the /cache/recovery direcotry. it will contain logs of the failing install.
As for a solutions I think you either need to run the script or flash your device using a 1.6 FUSE image.
_keesj said:
If you want to know what is going wrong with the zip install check the /cache/recovery direcotry. it will contain logs of the failing install.
As for a solutions I think you either need to run the script or flash your device using a 1.6 FUSE image.
Click to expand...
Click to collapse
I couldn't find any (log) files in /cache/recovery, but...
flashing the EBR1 from the FUSE binaries (FP1U) to my FP1 solved it! :victory:
thanks to _keesj, Rick (from Fairphone) and Christian (Fairphone forum)!
here is Rick's tutorial (with a few notes of my own):
You can only fix this by flashing your phone:
For GURU's only! (flashing with ADB). The alternative is to use the windows flasher tool.
1) Download the original image binaries from Fairphone's site (as a new user I, jjjanssen, can't post links yet).
(Download FP1U's zip: Fairphone_Cherry_1.6_FUSE_Image_2014-07-31.zip)
2) unzip the file
(I chose to unzip to location D:/FP1U.
after that i moved all content from the directory which contained EBR1, to D:/FP1U.)
3) enable usb debugging (on your phone: Settings, Developer options, turn USB debugging on)
4) push EBR1 on the phone: (Open (if you're using Windows) the Command Prompt)
adb push FP1U/EBR1 /mnt/sdcard/
(For instructions on how to use ADB search this site)
5) become root:
adb shell
(after that I also became super user (command su), but maybe that's not necessary; Rick didn't mention it. )
6) override the partition inforation:
dd if=/mnt/sdcard/EBR1 of=/dev/ebr1
7) reboot into recovery:
reboot recovery
8) choose to wipe data and cache
(after that, choose reboot)
Click to expand...
Click to collapse