Galaxy W Bricked!! HELP!!! - Samsung Galaxy W I8150

hello guys,
I need a help,
well, yesterday, I try to flash the Bionic Cow Rom v7 it's works well. but today, when I decide to switch back into stock rom. and flashed the stock rom successfully with odin, but I get stuck at the SAMSUNG GALAXY W logo and never able to go to the homescreen.
I try to go into the Download Mode, but whenever I press the volume up button (after pressing the power + home + vol. down button) it keep showing me the Warning screen, no DOWNLOAD screen popup.
I didn't be able to use ODIN to install the stock rom.
I flashed the "I8150XXLM8_I8150OXXLC2_XSK" stock rom before I install the Cow rom.
When I try to get back to my default country roms (I8150DXLM3_I8150OLBLD1_XSE) I always get stuck with the SAMSUNG logo and also I didn't be able to go into download mode.
Any Ideas??
PLEASE! I NEED YOUR HELP!!!

do you have the clock work mod on your device?
maybe you'll be able to flash your old rom with that one.
sometime i although got the same problem with the "volume up" button in the download mode. Try to remove your battery and wait a short moment. Than - try again - maybe it's just a "timing" problem.

The 'Warning: Flashing a Custom OS can...' screen, or the Android with the red triangle screen?

Ndysilon said:
do you have the clock work mod on your device?
maybe you'll be able to flash your old rom with that one.
sometime i although got the same problem with the "volume up" button in the download mode. Try to remove your battery and wait a short moment. Than - try again - maybe it's just a "timing" problem.
Click to expand...
Click to collapse
LOL.
THANKS,, it works!! , I try to remove the battery and wait a short moment, then I put the battery back and try again to go into Download Mode.. and now I get my stock rom back.
Nope, I've the stock CWM.
juzz86 said:
The 'Warning: Flashing a Custom OS can...' screen, or the Android with the red triangle screen?
Click to expand...
Click to collapse
yeah,, but nvm.. the prob is solved..

Related

[Q] Help - hangs on boot with Samsung Logo animation

GS3 (SGH-i747M) is rooted and I tried a few ROMs, CM10 most recently.
I tried to go back to the stock ICS ROM so that I could then upgrade to JB.
However, after flashing back to the stock listed here, the phone started hanging during the boot.
I tried to go with the JB ROM from that same link, I tried all the ROMs there, I keep getting stuck at the same point in the boot. It's after the little flashy animation, with just the Samsung logo slightly animated. It just keeps animating and animating.
Any suggestions would be great.
joffet said:
GS3 (SGH-i747M) is rooted and I tried a few ROMs, CM10 most recently.
I tried to go back to the stock ICS ROM so that I could then upgrade to JB.
However, after flashing back to the stock listed here, the phone started hanging during the boot.
I tried to go with the JB ROM from that same link, I tried all the ROMs there, I keep getting stuck at the same point in the boot. It's after the little flashy animation, with just the Samsung logo slightly animated. It just keeps animating and animating.
Any suggestions would be great.
Click to expand...
Click to collapse
Reboot to recovery and do a factory data reset.
Thanks
tonymtl said:
Reboot to recovery and do a factory data reset.
Click to expand...
Click to collapse
That fixed it, thanks
also stuck in boot animation
I have the same problem going from Task650's JB ROM back to stock JB so I can sell my GS3. All completed successfully according to Odin, but after the usual boot animiation, it gets stuck in the SAMSUNG logo. But I can't get into either recovery or download modes. I try the Vol Up or Down-Home-Power and it reboots through animation, but then stuck there.
I've tried taking out the battery. Nothing works.
Can anyone help?
Thanks in advance.
Can u get into download mode?
Sent from my SAMSUNG-SGH-I747 using xda premium
Take the battery out, hold volume down, home, power, and plug into a computer. It should go into download mode.
shoestar said:
Take the battery out, hold volume down, home, power, and plug into a computer. It should go into download mode.
Click to expand...
Click to collapse
he fix it. BTW you don't need to plug in to PC if you want to get in to download mode.
shoestar said:
Take the battery out, hold volume down, home, power, and plug into a computer. It should go into download mode.
Click to expand...
Click to collapse
I was able to figure it out.
Thanks!
norbarb said:
he fix it. BTW you don't need to plug in to PC if you want to get in to download mode.
Click to expand...
Click to collapse
If the battery is out you do. Lol.

Asking for help after being stuck for 1 hr

Long story short
Rogers Note 2
Got AllShare Cast dongle today and got it working with Stock rom, as I understood that it doesnt work with custom rom - I went ahead and tried with - http://forum.xda-developers.com/showthread.php?t=2016575 and expected, it didnt work so this involved triangle away etc
Phone had no issue, went to TWRP recovery
So now, I though I will try something else like - http://forum.xda-developers.com/showthread.php?t=1984546&highlight=allshare
But I got stuck, it wouldn't go to recovery mode, it was stuck on SAMSUNG
So I ODIN'ed it and put stock back - I317MVLALJ2_I317MOYAALJ2_I317MVLALJ2_HOME.tar.md5
It went successfully, and then it rebooted but its stuck at SAMSUNG which is flashing with colorrs
I have seen this happen before with my Galaxy and S3 and the fix was to goto Recovery ( Stock ) and factory reset and it fixed it
BUT I just can't get into recovery mode
I then ODIN'ed TWRP but again, can't get into recovery mode
VOL UP + HOME + POWER
I am stuck big time, what else can I do?
inningsdefeat500 said:
Long story short
Rogers Note 2
Got AllShare Cast dongle today and got it working with Stock rom, as I understood that it doesnt work with custom rom - I went ahead and tried with - http://forum.xda-developers.com/showthread.php?t=2016575 and expected, it didnt work so this involved triangle away etc
Phone had no issue, went to TWRP recovery
So now, I though I will try something else like - http://forum.xda-developers.com/showthread.php?t=1984546&highlight=allshare
But I got stuck, it wouldn't go to recovery mode, it was stuck on SAMSUNG
So I ODIN'ed it and put stock back - I317MVLALJ2_I317MOYAALJ2_I317MVLALJ2_HOME.tar.md5
It went successfully, and then it rebooted but its stuck at SAMSUNG which is flashing with colorrs
I have seen this happen before with my Galaxy and S3 and the fix was to goto Recovery ( Stock ) and factory reset and it fixed it
BUT I just can't get into recovery mode
I then ODIN'ed TWRP but again, can't get into recovery mode
VOL UP + HOME + POWER
I am stuck big time, what else can I do?
Click to expand...
Click to collapse
When you Up/Home/Power do you get download mode? I had a similar issue and had to flash back to stock. If you can get download mode then not all is lost.
I will see if I can find the post I used.
EDIT: This was the post I used: http://forum.xda-developers.com/showthread.php?t=2004650 It will put you back to stock/rooted.
Krystm said:
When you Up/Home/Power do you get download mode? I had a similar issue and had to flash back to stock. If you can get download mode then not all is lost.
I will see if I can find the post I used.
EDIT: This was the post I used: http://forum.xda-developers.com/showthread.php?t=2004650 It will put you back to stock/rooted.
Click to expand...
Click to collapse
I did flash to stock and then get back to Recovery but all is fixed and here's the explanation
When I had TWRP - I press VOL UP + HOME + POWER in any order, and it went to recovery, my last try was CWM which ironically never installed the 1st time I installed recovery and read this post in some website that WAIT for Samsung and then release power, i was like - lets try
So VOL UP + HOME + POWER all the same time, only release power when Samsung logo came and voila, I was in CWM
Pheww.I was like, I am dead
Also found, the hard way that ROGERS STOCK ROM Posted here - http://www.sammobile.com/firmware/?page=8&view=8176 is actually BELL
tx for ur reply and link mate
inningsdefeat500 said:
I did flash to stock and then get back to Recovery but all is fixed and here's the explanation
When I had TWRP - I press VOL UP + HOME + POWER in any order, and it went to recovery, my last try was CWM which ironically never installed the 1st time I installed recovery and read this post in some website that WAIT for Samsung and then release power, i was like - lets try
So VOL UP + HOME + POWER all the same time, only release power when Samsung logo came and voila, I was in CWM
Pheww.I was like, I am dead
Also found, the hard way that ROGERS STOCK ROM Posted here - http://www.sammobile.com/firmware/?page=8&view=8176 is actually BELL
tx for ur reply and link mate
Click to expand...
Click to collapse
I am currently on JEDI 6.1 on my Note2 I was looking for something more flashy so I tried CM10. I guess I got something wrong cause I got constant boot loop. I thought all was lost since this is my first droid. But, went to stock, then back to Jedi. Glad this forum is here to help. This is what ultimately saved my @$$ so I am glad I didn't brick my phone and I am awaiting the Paranoid Andorid port to get done. I did install the 7100 version. nothing worked but man it sure was pretty.
Krystm said:
I am currently on JEDI 6.1 on my Note2 I was looking for something more flashy so I tried CM10. I guess I got something wrong cause I got constant boot loop. I thought all was lost since this is my first droid. But, went to stock, then back to Jedi. Glad this forum is here to help. This is what ultimately saved my @$$ so I am glad I didn't brick my phone and I am awaiting the Paranoid Andorid port to get done. I did install the 7100 version. nothing worked but man it sure was pretty.
Click to expand...
Click to collapse
You wanna try the N7105 Rom, its superb but I can't use it as I just got the Allshare cast dongle and that only works with stock rom/rooted so waiting for fix, but if if u really want a good rom, I would use http://forum.xda-developers.com/showthread.php?t=2016575 type 3 - the blue theme is divine
I was on jedi b4
if you can get the phone to power up then you're not all lost.
I would do a md5 check of the .tar you flashed and see if it was a bad download...
even if you can't get to recovery via the button combo have you tried download mode? try to odin to something different - if you want stock rooted, try the "how to root without tripping the flash counter" thread and download that dude's root as it's an entire ROM essentially that is installed to your phone. The flash will take much longer than you are used to, so don't worry about it and resist the temptation to pull your phone or cancel the flash midway through.... it's almost 1 GB of info that is being rewritten so it'll take time.
if you can't get to DL mode you can use a jig to force the phone into it and odin from there.
hopefully that helps out.

Note 8.0 N5110... Bricked?

Hey guys
I've problem with my Note so... Hope you can help me :/
I recently installed last CM10.2 nightly from get.cm. So I restored all my apps and after that I applied the nav bar trough Pimp My ROM...
Everything was going good up to here. When I tried to boot into Recovery Mode to wipe cache (Because the tablet won't boot) a message popped up saying that I was in "SDCARD MODE" (The hell is that!) followed by something like coping to EMCC... Like if it was coping something from the SD to EMCC
After that the tablet got (Bricked?)... No vibration, no Samsung logo, no nothing
Any suggestions? Did I ****ed it up?
Any help would be appreciated guys
Cheers
rena14 said:
Hey guys
I've problem with my Note so... Hope you can help me :/
I recently installed last CM10.2 nightly from get.cm. So I restored all my apps and after that I applied the nav bar trough Pimp My ROM...
Everything was going good up to here. When I tried to boot into Recovery Mode to wipe cache (Because the tablet won't boot) a message popped up saying that I was in "SDCARD MODE" (The hell is that!) followed by something like coping to EMCC... Like if it was coping something from the SD to EMCC
After that the tablet got (Bricked?)... No vibration, no Samsung logo, no nothing
Any suggestions? Did I ****ed it up?
Any help would be appreciated guys
Cheers
Click to expand...
Click to collapse
Can you enter download mode? If you can, flash a stock fw with odin. (Home + Volume Down + Power)
Go to sammobile.com for a stock FW.
Always better to start over from stock when things goes wrong like that IMO.
Bl00DGuY said:
Can you enter download mode? If you can, flash a stock fw with odin. (Home + Volume Down + Power)
Go to sammobile.com for a stock FW.
Always better to start over from stock when things goes wrong like that IMO.
Click to expand...
Click to collapse
I can't do anything dawg.... The tablet is like dead
Wether I try to enter download mode or recovery mode, nothing happens
Btw, y' know what's EMCC?
So if you hold the power button and volume down at the same time for between 5 to 10 seconds, you get no Samsung logo at all?
If you get absolutely no logo (and the battery isn't dead) then it sounds like you totally bricked your bootloader somehow.
If that's the case, I'd send it in for service.

[Q] T989 stuck on samsung logo - no power button

hey guys,
I was on 4.1.2 I had a "NO SIM" issue so i decided to try to root and flash 4.4 rom (was using touch recovery 2.7.0.0 all the way)
then it got stuck on samsung logo, I need to know if it's possible to boot RECOVERY MODE either FROM DOWNLOAD MODE or some touch/vol buttons way to boot into recovery, I have tried everything within my knowledge, I start the phone by sliding the battery out and in while USB plugged. or into download mode by holding both VOL buttons. I need to get into recovery and do a full wipe so I can do a fresh jelly bean 4.1.2 again.
thanks!
troolplay said:
hey guys,
I was on 4.1.2 I had a "NO SIM" issue so i decided to try to root and flash 4.4 rom (was using touch recovery 2.7.0.0 all the way)
then it got stuck on samsung logo, I need to know if it's possible to boot RECOVERY MODE either FROM DOWNLOAD MODE or some touch/vol buttons way to boot into recovery, I have tried everything within my knowledge, I start the phone by sliding the battery out and in while USB plugged. or into download mode by holding both VOL buttons. I need to get into recovery and do a full wipe so I can do a fresh jelly bean 4.1.2 again.
thanks!
Click to expand...
Click to collapse
Are you saying that your power button doesn't work or what? Also, this belongs in q&a. I'll ask a moderator to move it.
Sent from my SGH-T989
EDIT: thread moved.
I'd fix the power button first. Then the rest is easy. You're in for many headaches with a bad power button. Plus, if it acts up while flashing anything, you could be in real trouble.
it's a little urgent on needing the phone to use it, thats why am digging into this. the button wont be here until at least wednesday 13th.
but yeah i guess i'll wait
thanks for your responds guys!

BootLoop post Viper4Android module on Magisk with Lineage 15/Oreo

Lineage /Oreo was installed thru TWRP 3.xxx, running fine but unhappy , no Viper4Android , so I installed it as a module on Magisk,
after installing the driver, was ask to reboot as directed, but went into bootloop , stuck on a boot loop " Set Warranty Bit : kernel " top left corner and Samsung Galaxy Note 3 on screen ; I tried Vol Up +Home+ power combo and all other combi I could think but no luck , Odin wont recognize my phone, tried Samsung 300k tool with no luck, I fell like a newbie after using so many ROMs on all of my devices, I google how to get back to download mode but no luck, I need help to make my Samsung note 3 work again, PLEASE. THANKS.
Hi,
I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.
I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.
Best of luck.
EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.
Sent from my SM-N900T using Tapatalk
AndroidHacker99 said:
Hi,
I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.
I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.
Best of luck.
EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
Isn't download mode volume down + home + power?
Aykee said:
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
Click to expand...
Click to collapse
You need to take the battery out to force it out of the bootloop then push volume DOWN, home & power.
Sent from my SM-N900T using Tapatalk
audit13 said:
Isn't download mode volume down + home + power?
Click to expand...
Click to collapse
Sorry, I mean Vol down but no luck.
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Aykee said:
Sorry, I mean Vol down but no luck.
Click to expand...
Click to collapse
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.
Sent from my toaster using Magic
audit13 said:
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Click to expand...
Click to collapse
Sounds like a good idea, ordering on amazon..thanks
ludeawakening said:
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.
Sent from my toaster using Magic
Click to expand...
Click to collapse
I did all button combination, cant get into download nor recovery mode , am not sure if buttons are wack but it feel responsive and clicky but thanks anyway am going for the USB jig, I never had one.
audit13 said:
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Click to expand...
Click to collapse
I got the USB jig but nothing happen after plugging in, any other idea please?
Removed the battery, inserted the jig, and then inserted a charged battery?
audit13 said:
Removed the battery, inserted the jig, and then inserted a charged battery?
Click to expand...
Click to collapse
The jig that I bought didnt do anything so I make my own, I can go to download mode now, installed this ROM/firmware N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar.md5 succesfully but wont go pass beyond the tmobile logo, tried a few more firmware and lately this N900TUVUFOL1 and also , am stuck to Tmobile logo, anybody knows which firmware would likely bring my note 3 back to life, thanks in advance.:
Try this:
Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
audit13 said:
Try this:
Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
Click to expand...
Click to collapse
After "reset" status, I did remove cable, remove batt and boot up to recovery, the blue light lit up as if its going to recovery mode , android logo showed up but phone boot up to normal but not pass beyond tmobile logo, so I did CF-root via odin , but still not booting to recovery.
Try flashing the entire ROM in AP.
audit13 said:
Try flashing the entire ROM in AP.
Click to expand...
Click to collapse
Thanks Audit13,
I manage to restore my Note 3 to TMobile Android 5 using repair firmware , it looks like I wipe out the partition ,My phone runs like new, am just wondering why I cant go to Download mode with button combinations of Volume -/Home/power , tried to install twrp via Odin, it says PASS but Vol +/Home/Power wont lead me to bootloader, did tried CWM , it will boot up but before I could start using it, it will reboot to normal and I could not go back to bootloader with button combo Vol+/Home/Power........HELP...
Download mode is volume down+home+power.
To flash TWRP with Odin, try this:
Open Odin and only check f reset time. Flash TWRP. When you see the word reset in the Odin status window, remove the USB cable from the phone, remove the battery, replace battery, press home + volume up + power.
N900TUVUFOB6_N900TTMBFOB6_TMB and N900 PIT - are the files am using after screwing up my partition( I dont know how I did that ), this Note 3 is running like a hot knife on a butter BUT the only bug I notice is Volume Up + Home + Power ( recovery) NOR Volume Down + Home + Power (download ) does not work, I can only go to download mode using a USB JIG and no other way. I can flash TWRP via Odin with Auto-reboot not ticked , so I could remove cable, battery , hoping to get me to recovery mode but I couldnt. Did I miss a step?I need help.

Categories

Resources