Hey all,
So, my smart self was attempting to flash Marshmallow 6.0 from 4.3 (rooted)...I did the same thing that was here on this THREAD and now my tab can only go into TWRP, but there's no OS installed because I wiped (and didn't make a darn backup....), but there are a few differences from the thread I referred to:
- I can get into my Bootloader
- I can get into TWRP
- I have the current TWRP 2.8.7
- I've tried the Nexus Toolkit from HERE, my device serial is recognized, but it states that I'm offline
- Because I'm offline, I can't push any files to my device through the tool
- When I'm in TWRP, my computer will recognize my tablet and I can actually get into folders and what not, but I can't copy/paste any files to flash within TWRP and I get an error
- Anytime I power down or reboot within TWRP, it tells me that I have No OS installed
- I can't use ADB (as far as I know) because my device shows that it's offline
Is there any hope that I can recover even back to 4.3?
Any guidance would really be appreciated. I have to step away because I'm frustrated and am angry at myself that I didn't make a nandroid.
Thanks in advance.
kevs888 said:
Hey all,
So, my smart self was attempting to flash Marshmallow 6.0 from 4.3 (rooted)...I did the same thing that was here on this THREAD and now my tab can only go into TWRP, but there's no OS installed because I wiped (and didn't make a darn backup....), but there are a few differences from the thread I referred to:
- I can get into my Bootloader
- I can get into TWRP
- I have the current TWRP 2.8.7
- I've tried the Nexus Toolkit from HERE, my device serial is recognized, but it states that I'm offline
- Because I'm offline, I can't push any files to my device through the tool
- When I'm in TWRP, my computer will recognize my tablet and I can actually get into folders and what not, but I can't copy/paste any files to flash within TWRP and I get an error
- Anytime I power down or reboot within TWRP, it tells me that I have No OS installed
- I can't use ADB (as far as I know) because my device shows that it's offline
Is there any hope that I can recover even back to 4.3?
Any guidance would really be appreciated. I have to step away because I'm frustrated and am angry at myself that I didn't make a nandroid.
Thanks in advance.
Click to expand...
Click to collapse
Are you using stock rom? Because if you are, I wouldn't even try. What with the widespread knowledge that stock might brick, some people insist on it. Otherwise, if you can get to the bootloader:
(1) Make sure it's unlocked (if you're not familiar, connect tab to PC, make sure fastboot works, then enter "fastboot oem unlocked" without the quotes then follow instructions on your tab);
(2) Flash bootloader 4.05 if you haven't already;
(3) Get a USB OTG thumb drive (you might need an OTG adapter for this); and download a Marshmallow-based custom rom in the Android Development section;
(4) Get into TWRP and mount USB OTG. You should see all the files on your thumb drive;
(5) Copy all data you care about to your PC;
(6) Wipe everything except USB OTG twice. Then go to Format and do it twice too. If yours is 32GB, it will take a while (30 Mins average depending on how much data);
(7) Flash rom, then Gapps.
You should be able to boot after that. Good luck.
(4)
graphdarnell said:
Are you using stock rom? Because if you are, I wouldn't even try. What with the widespread knowledge that stock might brick, some people insist on it. Otherwise, if you can get to the bootloader:
(1) Make sure it's unlocked (if you're not familiar, connect tab to PC, make sure fastboot works, then enter "fastboot oem unlocked" without the quotes then follow instructions on your tab);
(2) Flash bootloader 4.05 if you haven't already;
(3) Get a USB OTG thumb drive (you might need an OTG adapter for this); and download a Marshmallow-based custom rom in the Android Development section;
(4) Get into TWRP and mount USB OTG. You should see all the files on your thumb drive;
(5) Copy all data you care about to your PC;
(6) Wipe everything except USB OTG twice. Then go to Format and do it twice too. If yours is 32GB, it will take a while (30 Mins average depending on how much data);
(7) Flash rom, then Gapps.
You should be able to boot after that. Good luck.
(4)
Click to expand...
Click to collapse
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
kevs888 said:
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
Click to expand...
Click to collapse
It shouldn't make a difference what rom you flash now so long as you wipe and format everything inside TWRP. But you must make sure you have bootloader 4.05. 4.02 will not allow you to flash LL or MM successfully, and the system does not upgrade on its own no matter what rom you're flashing now.
Since you said you couldn't get TWRP to copy anything, I suggested that you use a thumb drive. Basically, if you turn the tab totally off, hold power + volume down for a few seconds, it should take you to the fastboot page (pic). Look to see what bootloader version you have there.
From here, you can basically flash anything. I recommended that you wipe and format first with TWRP because it happened to me a few times when for some reason, wiping alone still left some residual data that interfered with flashing newer roms.
Stay away from anything stock for the moment. God knows it has bricked more than a few devices. Download SkipsoftToolKit and flash from the fastboot page if you want an automated process. It has worked wonderfully in my experience. Ask if you have more questions. Have fun.
kevs888 said:
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
Click to expand...
Click to collapse
Fastboot page
graphdarnell said:
It shouldn't make a difference what rom you flash now so long as you wipe and format everything inside TWRP. But you must make sure you have bootloader 4.05. 4.02 will not allow you to flash LL or MM successfully, and the system does not upgrade on its own no matter what rom you're flashing now.
Since you said you couldn't get TWRP to copy anything, I suggested that you use a thumb drive. Basically, if you turn the tab totally off, hold power + volume down for a few seconds, it should take you to the fastboot page (pic). Look to see what bootloader version you have there.
From here, you can basically flash anything. I recommended that you wipe and format first with TWRP because it happened to me a few times when for some reason, wiping alone still left some residual data that interfered with flashing newer roms.
Stay away from anything stock for the moment. God knows it has bricked more than a few devices. Download SkipsoftToolKit and flash from the fastboot page if you want an automated process. It has worked wonderfully in my experience. Ask if you have more questions. Have fun.
Click to expand...
Click to collapse
This is really helpful...I think I'm almost there.
I'm on a super old Bootloader (see attachment) so I'll need to update. I downloaded the update from this XDA Thread
More questions:
- Would I be able to push the 4.05 bootloader update and custom whatever Marshmallow ROM via the toolkit instead of from a USB OTG?
- If I was rooted on 4.3, am I still rooted so that I would be able to flash the custom ROM? I don't want to risk doing further damage, lol.
- I'm not home at the moment, so I can't test this out -- I'm thinking I couldn't put anything into my tablet last night because it was running TWRP and I didn't have it on the Fastboot screen. Would being in the Fastboot screen possibly allow me to copy/paste the zip files into my tablet?
- If there's nothing I need to copy from the tablet, would I still need the USB OTG? Or could I just use the Toolkit to push everything into my tablet and flash via TWRP?
Based on your answers to the above would this be the correct order:
1. Push 4.05 bootloader update and custom ROM via toolkit to my tablet
2. Flash 4.05 bootloader update within TWRP
3. *Per your earlier advice* Wipe everything except USB OTG twice. Is this cache, dalvik, system, and data? Or literally there's an option for "wipe everything" (I don't remember what I saw)?
4. Then go to Format and do it twice, too. I have a 32GB, so I'm expecting it to take awhile for the format
5. Flash ROM, then Gapps. I don't have any apps I need to put back so much as I need an OS to load, so I can add later.
Thanks again for everything!
EDIT:
Okay, so I came home and was able to use the Toolkit to recognize the device in fastboot mode. However, I wasn't able to push anything into the phone because the Toolkit said that I needed to be booted into Android.
The last thing I saw when I was in TWRP poking around was that I saw that I could install .zip files from USB OTG. Are either of these alright for me to connect my flash drive to and be recognized inside TWRP?
Example 1
Example 2
kevs888 said:
This is really helpful...I think I'm almost there.
I'm on a super old Bootloader (see attachment) so I'll need to update. I downloaded the update from this XDA Thread
More questions:
- Would I be able to push the 4.05 bootloader update and custom whatever Marshmallow ROM via the toolkit instead of from a USB OTG?
- If I was rooted on 4.3, am I still rooted so that I would be able to flash the custom ROM? I don't want to risk doing further damage, lol.
- I'm not home at the moment, so I can't test this out -- I'm thinking I couldn't put anything into my tablet last night because it was running TWRP and I didn't have it on the Fastboot screen. Would being in the Fastboot screen possibly allow me to copy/paste the zip files into my tablet?
- If there's nothing I need to copy from the tablet, would I still need the USB OTG? Or could I just use the Toolkit to push everything into my tablet and flash via TWRP?
Based on your answers to the above would this be the correct order:
1. Push 4.05 bootloader update and custom ROM via toolkit to my tablet
2. Flash 4.05 bootloader update within TWRP
3. *Per your earlier advice* Wipe everything except USB OTG twice. Is this cache, dalvik, system, and data? Or literally there's an option for "wipe everything" (I don't remember what I saw)?
4. Then go to Format and do it twice, too. I have a 32GB, so I'm expecting it to take awhile for the format
5. Flash ROM, then Gapps. I don't have any apps I need to put back so much as I need an OS to load, so I can add later.
Thanks again for everything!
EDIT:
Okay, so I came home and was able to use the Toolkit to recognize the device in fastboot mode. However, I wasn't able to push anything into the phone because the Toolkit said that I needed to be booted into Android.
The last thing I saw when I was in TWRP poking around was that I saw that I could install .zip files from USB OTG. Are either of these alright for me to connect my flash drive to and be recognized inside TWRP?
Example 1
Example 2
Click to expand...
Click to collapse
If you're comfortable using the ToolKit, you don't need an OTG cable. Connect your tab to PC, fire up ToolKit, complete all the prelim BS, then flash the bootloader from TK. Do not use TWRP for this. To do this, open the ToolKit folder in drive C:, locate the folder therein for zips, place the zip files (4.05 bootloader; TWRP; or custom roms) in there, and start to install. I am talking off the top of my head. But give me a few minutes to check the Kit again, and I'll give specific instructions. Bear with me, as I'm on Linux at the moment and therefore cannot start ToolKit (which is in Windows).
Things to do in order:
1. Download bootloader 4.05 (flashable zip HERE); and custom rom of your choice (zip format)
2. Locate the Unified Android ToolKit on drive C: on your PC and open it;
3. Locate the folder “put zip file to sideload here” → “Nexus 7 2013” then paste
bootloader zip and Rom zip in there;
4. Fire up Toolkit with tab connected; complete all the prelim questions;
5. Follow all the steps to install TWR 2870 (pic 8, choice 6);
6. Go to TWRP, wipe and format.
7. Go back to TWRP main page → “Advanced” → “ADB sideload”;
8 Go to ToolKit (pic 8) enter choice 16 (Look at the pics that follow for the correct choices) to
sideload Bootloader;
9. Flash Bootloader.
10. Go back to TWRP main page → Reboot → Bootloader. Once there check bootloader version 4.05;
11. Get into TWRP to sideload Rom; flash it.
graphdarnell said:
Things to do in order:
1. Download bootloader 4.05 (flashable zip HERE); and custom rom of your choice (zip format)
2. Locate the Unified Android ToolKit on drive C: on your PC and open it;
3. Locate the folder “put zip file to sideload here” → “Nexus 7 2013” then paste
bootloader zip and Rom zip in there;
4. Fire up Toolkit with tab connected; complete all the prelim questions;
5. Follow all the steps to install TWR 2870 (pic 8, choice 6);
6. Go to TWRP, wipe and format.
7. Go back to TWRP main page → “Advanced” → “ADB sideload”;
8 Go to ToolKit (pic 8) enter choice 16 (Look at the pics that follow for the correct choices) to
sideload Bootloader;
9. Flash Bootloader.
10. Go back to TWRP main page → Reboot → Bootloader. Once there check bootloader version 4.05;
11. Get into TWRP to sideload Rom; flash it.
Click to expand...
Click to collapse
Wow, this is awesome. Thank you so much.
I had already flashed TWRP 2870 before I wiped the OS, but I figured I'd try again using the Toolkit, but I got an error. I stopped here just in case.
Earlier, I tried flashing the zip for the bootloader the same way you just instructed, but my serial number turned into question marks?
Please see attachments. My pics are on the right side of the comparisons and I blacked out some of my serial number just in case for the TWRP pic.
Thanks again for the continued support!
kevs888 said:
Wow, this is awesome. Thank you so much.
I had already flashed TWRP 2870 before I wiped the OS, but I figured I'd try again using the Toolkit, but I got an error. I stopped here just in case.
Earlier, I tried flashing the zip for the bootloader the same way you just instructed, but my serial number turned into question marks?
Please see attachments. My pics are on the right side of the comparisons and I blacked out some of my serial number just in case for the TWRP pic.
Thanks again for the continued support!
Click to expand...
Click to collapse
Ok. One step at a time. Since you don't have an OS installed, ToolKit cannot complete the process of sideloading because it normally would have to use ADB from within the OS (which is absent) to restart the tab into recovery mode (TWRP). But if you're already in sideload mode within TWRP, it would detect it and transfer the file over to your tab. Let's go back.
(1) Fire up ToolKit (TK), go to sideload step, type the file name and stop. Get to fastboot page on your tab. Go back to TK and hit enter. TK should detect fastboot mode, download TWRP 2.7.1.1, take the tab into TWRP, tell you to go to sideload mode. Thereafter, it should detect this mode and transfer the file over. Then TWRP would flash the bootloader 4.05 automatically. If successful, sideload the rom the same way to flash it. Then upgrade TWRP back to 2870 with TK.
(2) Failing the above (because TWRP somehow doesn't function correctly), put the tab in fastboot mode, go to TK and follow the steps to flash TWRP anew. TK should detect fastboot and begin to flash the recovery. That done, go back and restart (1) above.
(3) If that still doesn't work, we have to resort to fastboot.exe and do it by command lines. But that's far ahead. Try the above first. We'll cross that bridge if we get to it.
I can send you an automated package that would upgrade the bootloader to 4.04 that I downloaded a year ago from Scott's Roms (thanks to him). It's good enough for Lollipop 5.1. The file is about 4MB and I'm not sure how we can do this through XDA. But if we ever get there, I'm certain we'll find a way. And smile, it's only a lousy tab.
graphdarnell said:
Ok. One step at a time. Since you don't have an OS installed, ToolKit cannot complete the process of sideloading because it normally would have to use ADB from within the OS (which is absent) to restart the tab into recovery mode (TWRP). But if you're already in sideload mode within TWRP, it would detect it and transfer the file over to your tab. Let's go back.
(1) Fire up ToolKit (TK), go to sideload step, type the file name and stop. Get to fastboot page on your tab. Go back to TK and hit enter. TK should detect fastboot mode, download TWRP 2.7.1.1, take the tab into TWRP, tell you to go to sideload mode. Thereafter, it should detect this mode and transfer the file over. Then TWRP would flash the bootloader 4.05 automatically. If successful, sideload the rom the same way to flash it. Then upgrade TWRP back to 2870 with TK.
(2) Failing the above (because TWRP somehow doesn't function correctly), put the tab in fastboot mode, go to TK and follow the steps to flash TWRP anew. TK should detect fastboot and begin to flash the recovery. That done, go back and restart (1) above.
(3) If that still doesn't work, we have to resort to fastboot.exe and do it by command lines. But that's far ahead. Try the above first. We'll cross that bridge if we get to it.
I can send you an automated package that would upgrade the bootloader to 4.04 that I downloaded a year ago from Scott's Roms (thanks to him). It's good enough for Lollipop 5.1. The file is about 4MB and I'm not sure how we can do this through XDA. But if we ever get there, I'm certain we'll find a way. And smile, it's only a lousy tab.
Click to expand...
Click to collapse
Let me just say, I'm so thankful for your help in all of this. Seriously. Thank you.
I kept on tinkering with the ToolKit and Fastboot kept on stopping everytime I switched to TWRP. I got to the point where TWRP showed 2.7.1 but the ADB Sideload kept getting stuck at the "Starting Sideload" prompt.
I went out and bought a $3 OTB USG cable and figured I'd give it a go since this sounded easier (theoretically). At first, I couldn't understand why the OTG wasn't recognized within TWRP. Then, I realized I needed to mount it within TWRP.
Once it mounted, I wiped and flashed the 4.05 bootloader zip. Success.
I went back into the Fastboot screen to verify 4.05. Success.
Went back into TWRP 2.8.7 and flashed a 6.0 ROM from these boards. Success.
Flashed Gapps. Success.
Rebooted. I'm now running a custom Marshmallow ROM and it runs so smoothly now.
Seriously. Thank you.
kevs888 said:
Let me just say, I'm so thankful for your help in all of this. Seriously. Thank you.
I kept on tinkering with the ToolKit and Fastboot kept on stopping everytime I switched to TWRP. I got to the point where TWRP showed 2.7.1 but the ADB Sideload kept getting stuck at the "Starting Sideload" prompt.
I went out and bought a $3 OTB USG cable and figured I'd give it a go since this sounded easier (theoretically). At first, I couldn't understand why the OTG wasn't recognized within TWRP. Then, I realized I needed to mount it within TWRP.
Once it mounted, I wiped and flashed the 4.05 bootloader zip. Success.
I went back into the Fastboot screen to verify 4.05. Success.
Went back into TWRP 2.8.7 and flashed a 6.0 ROM from these boards. Success.
Flashed Gapps. Success.
Rebooted. I'm now running a custom Marshmallow ROM and it runs so smoothly now.
Seriously. Thank you.
Click to expand...
Click to collapse
I'm glad you got it working again. Sorry you had to make a trip to the store. You should've waited for KT to switch the tab to TWRP 2711 for you. But it was not a waste of time anyway.
Hello everyone,
I recently did upgrade my phones OS from 1.2.x to 2.1.5i (ColorOS) via flash, not OTA.
Afterwards I rooted it using TWRP & SuperSu.
I did return to Stock Recovery (community. oppo. com/en/forum.php?mod=viewthread&tid=17397&extra= (Sorry, I can't post links yet, you have to remove the spaces between community oppo and com)).
My problem now is, that I want to use the "Switch Partition" option, to unify my phone storage, but everytime I try the phone does only boot into recovery, as I had a custom recovery.
Do I need a newer Stock Recovery Version? And where/how can I update it?
Or is it possible to unify the storage manually and continue using ColorOS?
Thanks in advance for any help,
Carroll
Probably you need a newer version. Try this.
Sorry for the late reply.
I did already try this - it didn't help.
I will flash the 4_4 recovery manually now.
Thank you
It seems to work.
Strange, I had to update the recovery via fastboot, when I tried to use the System Update tool it didn't work - although the phone told me so.
It worked.
Another strange thing: The gApps didn't get installed (only Settings & Photos). So now I'm sitting on a phone without any browser
maj0r_tom said:
Sorry for the late reply.
I did already try this - it didn't help.
I will flash the 4_4 recovery manually now.
Thank you
It seems to work.
Strange, I had to update the recovery via fastboot, when I tried to use the System Update tool it didn't work - although the phone told me so.
It worked.
Another strange thing: The gApps didn't get installed (only Settings & Photos). So now I'm sitting on a phone without any browser
Click to expand...
Click to collapse
Did you install ColorOS 2.1.5i and you don't have gapps? It's strange ...
Perhaps you could flash TWRP again and try to flash open gapps pico, but I'm not sure this works
javier.pc said:
Did you install ColorOS 2.1.5i and you don't have gapps? It's strange ...
Perhaps you could flash TWRP again and try to flash pico, but I'm not sure this works
Click to expand...
Click to collapse
I did just download and install the PlayStore APK, which worked fine.
maj0r_tom said:
Sorry for the late reply.
I did already try this - it didn't help.
I will flash the 4_4 recovery manually now.
Thank you
It seems to work.
Strange, I had to update the recovery via fastboot, when I tried to use the System Update tool it didn't work - although the phone told me so.
It worked.
Another strange thing: The gApps didn't get installed (only Settings & Photos). So now I'm sitting on a phone without any browser
Click to expand...
Click to collapse
I'm having the same problem as you do. Could you walk me through the steps you took to solve this problem?
Hello, can you please share the stockrecovery.img for fastboot?
nizohio said:
I'm having the same problem as you do. Could you walk me through the steps you took to solve this problem?
Click to expand...
Click to collapse
I think it is not necessary to download playstore.apk.
create a folder on your PC (Linux and Mac is your top choice), copy all your downloads in this folder (downloads = custom- rom zip, open_gapps zip, SuperSu zip etc)
next you need ADB (android debugging bridge) on your PC.
connect your smartphone with usb to your PC (usb debugging enabled on your phone- you find it under developer)
boot in recovery ( I assume you got lastest TWRP for your phone installed.)
in TWRP go to WIPE / ADVANCED WIPE --> tick Cache, Internal Storage, Data, System, Dalvik/Art Cache.
With this action you are going to lose all data, except data on your external SD and your OS as well. Common sense dictates to back up your data first :good:
after you swiped go to ADVANCED /ADB Sideload --> Swipe to Start Sideload
open your terminal on your pc and cd in your newly created folder with all your zip goodies.
type
Code:
adb sideload custom-zip
Use tab completion - very handy and you know there are no typos.
repeat this command with open-gapps.zip (beware you have to activate sideload in TWRP again) Caution: Do not reboot between installation of your custom - rom and open_gapps.
same procedure with Supersu.zip and so on.
After successful sideload installation, boot your phone to system. Now you should see welcome screen from Android and you have to do a few more setup steps to enjoy your new OS.
Hello everyone!
My oneplus3 is actually running no OS and I'm having a boot loop.
I will try to explain what happened to me with the most details I can.
Before I ****ed everything up, I think I was running OxygenOS 3.28, not really sure about it but im 100% sure it was below 4.0, and it was rooted with TWRP 3.0.2 installed.
1) Today I had a pop up saying OxygenOS 4.0.2 was available (the official one that pops on the screen on boot) "Yay so coooool Nougat!"
1.1) I downloaded it, 1.4Go, then I pressed install
1.2) TWRP showed up, I didn't know what to do and that's where I ****ed up, I set my phone "factory new" in TWRP.
1.3) Phone restarted fresh new, I thought I had 4.0.2 but naaaaah would've been too easy so the official pop up showed again, I was still 3.28 I think.
1.4) Downloaded it once more, TWRP opened again, this time i was looking for the update i just downloaded in the "install" section. I browsed for quite a while and couldn't find it.
1.5) Master ****-up here: I tried to restore a backup. Then the bootloop happened. The black screen with "Oneplus" written in white. I was able to go back in TWRP by pressing power + volume down
1.6) Tried every kind of restore unsuccessfully, and tried ADB but it wouldn't load. Also TWRP said that I was running no OS when I wanted to turn off my phone for example.
2) I downloaded 4.0.2 from one plus website on my mac, and i flashed the official recovery instead of TWRP.
2.1) Transferred the update from my mac to my PC (seems important to me) and installed ADB & everything on both PC/O+3.
2.2) so adb worked in forceboot, i've been able to flash official recovery, tried once more to wipe & everything, but clearly I have no OS now, as TWRP said.
2.3) so i had the update in a folder (not a zip, probably due to the download being done from a mac), I made it a .ZIP with winrar, but "adb sideload update.zip" crashed at 0% everytime
2.4) looked at the archive then i noticed it was first a folder "OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883" then inside it i had the content like "boot.img" & everything. So i zipped it again but without that first folder because I thought it was the problem, but it kept on crashing 0%.
2.5) restarted my PC, looked on several forums, but i couldn't find any fix. Now adb can't even open update.zip anymore, it fails even before 0%.. I tried naming it .zip.zip, keeping the name "OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip", using a third party app to allow more RAM to the cmd app...
I've been trying hard for 4 hours but I still have a O+3 without any OS... My last idea is downloading "OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883.zip" from my PC so it downloads it directly .zip unlike on my mac...
I hope I said everything, sorry for the long post but i'm desperate.. thanks for your attention,
Valentin
Try this guide: https://forum.xda-developers.com/oneplus-3/how-to/guide-flashing-oos-v4-0-1-custom-rom-t3537757
Let me know if it works.
EDIT: See FAQ #1, 2, 4, 12, 14 and 17.
dbabaev21 said:
Try this guide: https://forum.xda-developers.com/oneplus-3/how-to/guide-flashing-oos-v4-0-1-custom-rom-t3537757
Let me know if it works.
EDIT: See FAQ #1, 2, 4, 12, 14 and 17.
Click to expand...
Click to collapse
Thank you for answering! unfortunately i've already tried that and my problem occurs when i try to sideload the update from adb recovery... "couldn't load 'update.zip'"
I dont really know what to do now because I think my only option here is to load the OS through adb as I can't boot my phone to get the update zip inside a specified folder to load it from internal storage.
Try to install the new official TWRP version i think it is 3.0.3-0 through fastboot. Boot up TWRP, wipe every partiton and copy the update.zip onto the phone. You can copy it by connecting it normaly via USB(like you would do in OOS) and install the zip file afterwards.
Sleazy_ said:
Thank you for answering! unfortunately i've already tried that and my problem occurs when i try to sideload the update from adb recovery... "couldn't load 'update.zip'"
I dont really know what to do now because I think my only option here is to load the OS through adb as I can't boot my phone to get the update zip inside a specified folder to load it from internal storage.
Click to expand...
Click to collapse
install stock recovery and then try installing official OS. Or install modded twrp 3.0.2-1.28 and then try installing Freedom OS 2.3 via sideload or through internal storage.
Sleazy_ said:
Thank you for answering! unfortunately i've already tried that and my problem occurs when i try to sideload the update from adb recovery... "couldn't load 'update.zip'"
I dont really know what to do now because I think my only option here is to load the OS through adb as I can't boot my phone to get the update zip inside a specified folder to load it from internal storage.
Click to expand...
Click to collapse
Stop fiddling with the ROM. Download the ROM afresh directly to your Windows PC/laptop. Check the md5. Then start experimenting with the other suggestions but don't again meddle with the ROM!
Sleazy_ said:
Thank you for answering! unfortunately i've already tried that and my problem occurs when i try to sideload the update from adb recovery... "couldn't load 'update.zip'"
I dont really know what to do now because I think my only option here is to load the OS through adb as I can't boot my phone to get the update zip inside a specified folder to load it from internal storage.
Click to expand...
Click to collapse
I read your post again and here are a few things:
* Don't update Stock OOS via "System updates" in Settings if you are rooted and have TWRP
* Back up your data before updating, wiping or doing something with your phone.
* For the ADB error, see the FAQ #17 in the guide I provided.
Now, try this:
Flash TWRP via fastboot > boot to TWRP > connect your phone to your PC and copy the full Stock OOS v4.0.2 OTA to your phone > reboot to fastboot and flash Stock Recovery.
It didn't touch the internal storage. So, try to install from internal storage when you are in Stock Recovery.
Let me know if it worked.
Hi I've been away from the aftermarket ROM game for a while and I'm having a bit of trouble installing. Can anyone link to some instructions. All i could find was the ones posted by the Lineage Team but i am unsure if they are universal instructions or if they are only for Lineage. Some assistance would be great!
So details of what I've tried thus far:
Flashing from recovery (i assume this method is pretty much legacy at this point) -
reboot to recovery
factory reset
flash rom
While attempting this method I was unable to find a way to get the ROM zip on my device in an accessible fashion do to encryption, adb push never completeing, unable to mount external storage, and MTP not allowing me access to internal storage. (this is all with TWRP version 3.6 and 3.5 (the two newest as of this post))
ADB sideload -
Booted into TWRP and started the sideload channel
ran adb sideload <zip file>
this just sits and never progresses
I am using the adb and fastboot versions listed below:
ADB - 31.0.3
Fastboot - 31.0.3
I am also running Linux, I have tried using USB 2.0 as well as 3.0 (both had the same results). I have tried different cables (also same results).
Please let me know if any more information is needed to figure this out.
Thanks.
Some roms are designed to flash from fastboot, others from recovery.
Also, TWRP's failure to decrypt should only apply to Android 12 roms - but for those you'll need to format data (after a backup of course).
So tell us which rom you want to flash. Also see the rom's thread - generally, other users will have faced the same problems.
runekock said:
Some roms are designed to flash from fastboot, others from recovery.
Also, TWRP's failure to decrypt should only apply to Android 12 roms - but for those you'll need to format data (after a backup of course).
So tell us which rom you want to flash. Also see the rom's thread - generally, other users will have faced the same problems.
Click to expand...
Click to collapse
Sorry for the late reply, at the time I had just went back to the OS is was already running simply because they have a script to handle install. Though Right now I really want to at least go back to LineageOS, CalyxOS (the ROM on running now) is just too restrictive.
I know I've had issues installing LineageOS before and at that time I found away around it to get it installed but I don't remember what I did...
So this is what happens I When following the instructions here I always run into issues gaining access to the zip file in recovery/sideloading via ADB. I think last time I installed it I was able to boot to Lineag Recovery and sideload from there but sideloading in TWRP doesn't seem to work for me. and If I try to access the zip from TWRP (to flash in recovery) it's never there or errors out.
I think im going to try again today and will post any errors.
So i just remembered I can adb push and access an external drive while in slot_b but not slot_a.
Edit: NVM cant adb push on either slot in TWRP
So I just installed Lineage Recovery but sideloading doesnt progress at all just sits at verifying signature. I'll post in the lineage thread and post back here if I figure it out.
ok figured it out. Had to place the zip on an external drive, make sure my phone was in Slot A, boot TWRP, mount the external drive and flash from there, I got a few errors saying it couldn't mount /Vendor but it seems to work
deathblade said:
ran adb sideload <zip file>
this just sits and never progresses
Click to expand...
Click to collapse
Try connecting the phone through a USB hub. I had the same issue and this was how I resolved it.