[Release][PC]WP7Connector: Connect your phone easily & smartly - Windows Phone 7 Development and Hacking

forget your wpconnect.exe from the SDK.
this app is run on your PC, it could connect to your phone automaticly via USB, and your PC's network would be shared to your phone(and also you can deploy xaps).
and it also could detect Zune, so, if Zune has been launched it'll disconnect and reconnect when Zune is closed.
You NEED to install Zune before use(everyone has it)
SDK is NOT needed
Any Unlock is NOT needed
support Chinese & English language
support XP to Win7, both x86/x64
PS: on Win8, it has some bugs and may make your cpu usage to 100%
sorry for my bad English.

how to make it work in english on an italian w7 x64?

Hey does this require any kind of unlock??

Its a PC application
---------- Post added at 03:05 PM ---------- Previous post was at 02:45 PM ----------
what is the purpose of this app?

Magpir said:
Its a PC application
---------- Post added at 03:05 PM ---------- Previous post was at 02:45 PM ----------
what is the purpose of this app?
Click to expand...
Click to collapse
did you read first post?

Win 7 x64 not working ?

davide136 said:
how to make it work in english on an italian w7 x64?
Click to expand...
Click to collapse
it doesn't work?
i have only Chinese system and i think it should work on all languages, i'll check my code later, if it has any bugs i'll fix it

drsmart said:
Win 7 x64 not working ?
Click to expand...
Click to collapse
does it show some error message?
my computer is Win7 x64 and it can work very well. i'd tested it on Win7 x86/x64 and WinXP x86

sumedh123 said:
Hey does this require any kind of unlock??
Click to expand...
Click to collapse
no, it doesn't need any unlock

Chinese only, no other languuage

reker said:
forget your wpconnect.exe from the SDK
Click to expand...
Click to collapse
Hmm... Why should I "forget" wpconnect? It works perfectly well; and I've already published here on xda small utility for autorun anything on phone (or any USB device) insertion or removal (check this thread).

sensboston said:
Hmm... Why should I "forget" wpconnect? It works perfectly well; and I've already published here on xda small utility for autorun anything on phone (or any USB device) insertion or removal (check this thread).
Click to expand...
Click to collapse
it doesn't need wpconnect.exe from the sdk, even it doesn't need sdk, all you need is zune
and
when you open Zune, the connection created by wpconnect.exe will lose, and you must open wpconnect.exe again when Zune closed

titi66200 said:
Chinese only, no other languuage
Click to expand...
Click to collapse
the langage bug should be fixed, please download again in 1st post

It worked fine on Windows 8 yesterday.
But today it just gives me a "stopped working" error.
Any idea?

this app is run on your PC, it could connect to your phone automaticly via USB, and your PC's network would be shared to your phone(and also you can deploy xaps).
Click to expand...
Click to collapse
Pardon my ignorance, but I did not understand what this app is for . I can share my laptops internet connection on my phone via usb cable? If thats the case its not working for me

I've fixed my problem by reinstalling Zune.
Why I like this small app? Because it allows me to access Marketplace using my computer connection, while it's blocked when connected via Zune.

How to deploy xaps ?

reker said:
does it show some error message?
my computer is Win7 x64 and it can work very well. i'd tested it on Win7 x86/x64 and WinXP x86
Click to expand...
Click to collapse
Mine too, it doesn't show anything. double click the icon nothing happen.

maya79 said:
It worked fine on Windows 8 yesterday.
But today it just gives me a "stopped working" error.
Any idea?
Click to expand...
Click to collapse
i've tested it on win8,
it seems that it could only work when the 1st time phone pluged to pc
if you unplug and plug your phone again, the app will hung up
that is a big problem, i need some time to fix it

lsguntu said:
Pardon my ignorance, but I did not understand what this app is for . I can share my laptops internet connection on my phone via usb cable? If thats the case its not working for me
Click to expand...
Click to collapse
yes, it could share your pc's internet connection to your phone via usb
i think you can reinstall your zune, that maybe fix your problem

Related

WMDC 6.1 is now available!

Enjoy!
http://www.microsoft.com/windowsmobile/devicecenter.mspx
is it any different to 6.0.6783?
Still installing it, but it's supposed to be the first version to officially support WM6...
Is it just me or does it take ages for files to transfer using wmdc? if i use a £3 ebay purchased card reader its about 10x faster to pop the card in the reader and then put it back in the hermes when file transfer complete. I would have thought it wouldn't make that much difference but then again i don't much about that sort of thing
Wow for once it synced everything to Outlook 2007 thats something it never did before! Nice upgrade i must say
What version of WMDC is showing after your re-install?
Where would i find that? I know it said 6.1 when it installed
Open WMDC...
Click on the ? icon, and then check the "About WMDC..."
Thanks!
6.1.6965 ................
hmmm. 32-bit or 64-bit?
Is it me, or do ROM upgrades crash when using 6.1? I've managed to get ROM flashing working with Vista and WMDC (thanks mrvanx!), but with this update, the update application crashes after the phone goes into bootloader.
32 bit Vista ultimate
bizarre. I've downloaded/reinstalled the 32-bit English version three times, and my version still shows 6.0.6783
grrr
austinsnyc said:
32 bit Vista ultimate
Click to expand...
Click to collapse
Mine installed fine with Vista Ultimate also.
SK
Under Connections dialog: new choice, check or uncheck:
Allow data connections on device while connected to PC
Can get device certificates.
Exact same overall slowness to sync.
Opportunity to get stuff you don't need during driver install on first sync after upgrading to 6.1.
goestoeleven said:
Enjoy!
http://www.microsoft.com/windowsmobile/devicecenter.mspx
Click to expand...
Click to collapse
Thanks for the notice
Thanks for the update.
Q: After installing WMDC 6.1, can we still flash ROM images under Vista? Or do we need to replace the ActiveSync drivers with the 4.5 ones again?
goestoeleven said:
Enjoy!
http://www.microsoft.com/windowsmobile/devicecenter.mspx
Click to expand...
Click to collapse
good to know.
thanks.
goestoeleven said:
bizarre. I've downloaded/reinstalled the 32-bit English version three times, and my version still shows 6.0.6783
grrr
Click to expand...
Click to collapse
Ok, so I eventually got this running (both 32-bit and 64-bit Version 6.1.6965), but it was not a trivial install:
- had to disable firewall and antivirus
- had to uninstall all old versions and patches
- had to remove the device drivers for HTC USB Sync
Only then was I able to get it going (on both machines). Interestingly, I did not have to delete the partnership, but we'll see how today goes...
nbedford said:
Thanks for the update.
Q: After installing WMDC 6.1, can we still flash ROM images under Vista? Or do we need to replace the ActiveSync drivers with the 4.5 ones again?
Click to expand...
Click to collapse
Well, my first test results is you now can use RUUWrapper in Vista using the new 6.1 drivers from WMDC. Theres no need to change to old driver nor disable and kill the wmdc process... good news... i've just flash splash screen now for testing purpose.
I've tried the mtty too, but the port for connecting to PDA while in tricolour isn't in the list. Can someone put the name for the port, to test...i can't remember...
Thanks.

rom update in Vista

Hi everybody:
I recently started to use a PC with Vista. No activesync but instead WMDC exists. There is no problem in sync.ing with PPC but RUU does not work as expected.
I wonder if there is anyone else who successfully run RUU under vista and flush a new rom to the wizard..
I tried to apply the steps explained in this tread (which is for Hermes) : http://forum.xda-developers.com/showthread.php?t=299462 but I failed. RUU starts, then PPC starts in boot loader mode, after that the RUU hangs with an error...
Any advice, solution etc will be greatly appreciated.
Cheers,
Orhan.
did you try mobilty ceter
i think windows vista uses mobilty ceter not active sync
JIMBABY said:
i think windows vista uses mobilty ceter not active sync
Click to expand...
Click to collapse
he said that...that is WMDC...Windows Mobile Device Center...
Hi,
I will give a try to VMWare (virtual machine) and setup a virtual machine running XP under vista.. Hope it will work ... will report the result to the forum....
Orhan
killacam13 said:
he said that...that is WMDC...Windows Mobile Device Center...
Click to expand...
Click to collapse
I have used VMWare to update the ROM and it works without problems
it worked flawlessly!!
it worked flawlessly !!!!
1) install VMWare (http://www.vmware.com/download/ws/), 2) add a virtual machine in VMWare, 3) install Windows XP to that virtual machine (I used a 2GByte disk space for the xp virtual partitation), 4) Install activesync 4.5 ,
the rest is straight forward as you know
-orhan
orhtr said:
Hi,
I will give a try to VMWare (virtual machine) and setup a virtual machine running XP under vista.. Hope it will work ... will report the result to the forum....
Orhan
Click to expand...
Click to collapse
Yes, VMware works flawlessly on my vista x64... I've flashed ppc several times using XP virual machine and without any problem, but don't forget to disable usb connection on WMDC - else the RUU may cause an error in bootloader mode as it happened to me
Easier way?
So your saying this is the easiest way? There has to be an easier way to flash on vista.
i also use a virtual machine...its called Parallels Workstation...all vista users stick with a vitual machine...it is the easiest way so far...unless u just want the OS then just use ShellTools
Step By Step
Can somebody explain step by step how dos it work.Thank you.
dido said:
Can somebody explain step by step how dos it work.Thank you.
Click to expand...
Click to collapse
I'm not sure exactly what "it" is referring to, but if you are talking about how to install a VMWare workstation and create an image, there are plenty of helps online already to explain that. Just Google it. If you are referring to how to do the ROM update once you get into your virtual machine, it's pretty straight forward. You just plug in your USB cable from your cradle (when the Axim is on it) and the virtual machine will install it just as if you were running Windows XP natively on your machine. Again, there are lots of helps out there if you Google it.
htc prophet
1. installed vmware - xp pro
2. installed active sync 4.5
3. WMDC usb bypass
4. VM menu - REMOVABLE DEVICES - USB DEVICES - High tech computer usb device
5. nothing
just curious, but will this work with microsoft virtual pc instead of vmware? will probably test it myself when i next flash a new rom, but figured it was worth asking here...
monkey_knight said:
just curious, but will this work with microsoft virtual pc instead of vmware? will probably test it myself when i next flash a new rom, but figured it was worth asking here...
Click to expand...
Click to collapse
Yes, it should work just fine. It's the same concept either program you use.
I think that microsoft virtual pc 2007 doesn't support USB connections, so it won't work with it.
Jimm98y said:
I think that microsoft virtual pc 2007 doesn't support USB connections, so it won't work with it.
Click to expand...
Click to collapse
Oh really? Well why the heck would Microsoft do that (remove USB connection support)?
cavyman said:
Oh really? Well why the heck would Microsoft do that (remove USB connection support)?
Click to expand...
Click to collapse
hmmm...that would suck...though it does seem like virtual pc is a bit limited in it's hardware setup for a virtual system. if it doesn't work, i guess i'll have to try vmware...assuming it's free as well.
thx for the tips
monkey_knight said:
hmmm...that would suck...though it does seem like virtual pc is a bit limited in it's hardware setup for a virtual system. if it doesn't work, i guess i'll have to try vmware...assuming it's free as well.
thx for the tips
Click to expand...
Click to collapse
VMWare Player is free, but you would have to obtain a VMWare image somehow to use it. Otherwise, to create a VMWare image, you have to get VMWare Workstation which is gonna cost you.
yup...confirmed that virtual pc doesn't work...doesn't pick up connection (kinda sucks...since it was a free program)...
monkey_knight said:
yup...confirmed that virtual pc doesn't work...doesn't pick up connection (kinda sucks...since it was a free program)...
Click to expand...
Click to collapse
Well, it is a M$ product...free isn't really part of their vocabulary.

Problem with WMDC

Hello, i've installed WMDC 6.1, but i can't create a partership with the PDA.
When i connect it this error apears in eventviewer.
Windows Mobile-based device failed to connect due to communication (0x80072745) failure (see data for failure code).
thanks
Post #6; http://forum.xda-developers.com/showthread.php?t=315645
I've done that already.
If i Disable advanced network functionality Windows Vista don't create the windows mobile remote adapter, if i enable it it create it, but give me that error.
joaoccc said:
I've done that already.
If i Disable advanced network functionality Windows Vista don't create the windows mobile remote adapter, if i enable it it create it, but give me that error.
Click to expand...
Click to collapse
The guy solved the problem by creating new backups
I tried to connect to two computers at work, and give me the same problem.
That computrs work with HTC Touch.
joaoccc said:
I tried to connect to two computers at work, and give me the same problem.
That computrs work with HTC Touch.
Click to expand...
Click to collapse
... have you read the article? you need to create new backups on ur Artemis, then try syncing again.
what kind of computer?
I needed to get a hotfix from microsoft for my sony vaio for wmdc to work...

[Q] Windows Phone Unlock Chevron

i have samsung focus and i try to unlock my phone with chevron and i got all the time this error:
"please make sure it connected using usb
please start the zune app"
and i connected the usb and the zune app running
what can i do?
Read through this thread. People have run into the same issues as you, and there are a few options to go through.
http://forum.xda-developers.com/showthread.php?t=938106
Loiselle said:
Read through this thread. People have run into the same issues as you, and there are a few options to go through.
http://forum.xda-developers.com/showthread.php?t=938106
Click to expand...
Click to collapse
i still get the error
This was happening to me, too. After installing Windows Phone Developer Tools, the problem went away. The issue was that my PC's registry hadn't been modified. This key has to be in your PC registry:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]“DeviceReg”=dword:000069C5
The Developer Tools adds it when installed.
Try that and tell me if it works or not.
rmcgraw said:
This was happening to me, too. After installing Windows Phone Developer Tools, the problem went away. The issue was that my PC's registry hadn't been modified. This key has to be in your PC registry:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]“DeviceReg”=dword:000069C5
The Developer Tools adds it when installed.
Try that and tell me if it works or not.
Click to expand...
Click to collapse
thenx it work for me:]]]]]]
netayamin said:
thenx it work for me:]]]]]]
Click to expand...
Click to collapse
how did you add the code to the register?
gt5402.1 said:
how did you add the code to the register?
Click to expand...
Click to collapse
Installing Windows Phone Developer Tools writes the registry key to your computer. There are other methods, but that is the easiest.
Download Windows Phone Developer Tools

Windows XP and MTP mode

Anyone have any tips or tricks to getting MTP to function on a Windows XP (32-bit) machine? I keep getting an error message saying that it didn't install successfully, and I can't access anything on my sdcard (internal or external).
The error message is as follows:
Cannot Install this Hardware
There was a problem installing this hardware:
LGE Android Net MTP Device
An error occurred during the installation of the device
The specified service does not exist as an installed service.
Click Finis to close the wizard.
I've been searching high and low and have found and executed what seemed to be pretty good leads on getting it working, but all to no avail.
Things I've tried:
- Installed the LGUnitedMobileDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3.exe package.
- Ensured that Windows Media Player 10 or greater is installed.
- Ensured that USB Debugging is NOT checked in phone.
- Installed the Microsoft MTP Porting Kit.
- Opened and edited the wpdmtp.inf file located within the C:\WINDOWS\inf\ folder to include and point specifically to the Device and Vendor ID for the LG G3 D851 (for those wondering what that looks like, here it is: %GenericMTP.DeviceDesc%=MTP, USB\VID_1004&PID_633E&MI_00 )
- Opened Device Manager and manually updated the driver by pointing it to the LG Electronics folder created when installing the driver package above.
- Rebooted computer multiple times.
- Uninstalled and reinstalled device and drivers multiple times.
- Tried editing/deleting a registry key (don't worry, I backed it up and restored it when it didn't work)
I swear there were other things I tried, but if there were, I'm not remembering them right now.
Anybody have any suggestions? Anyone had success with Windows XP and MTP mode on this device?
Thanks for your time.
Come on, smart people! Surely someone has something to add, even if it's simply that they too couldn't get it to work. At least that would make me feel less incompetent... LOL
format your comp see how that works
Boostjunky said:
Come on, smart people! Surely someone has something to add, even if it's simply that they too couldn't get it to work. At least that would make me feel less incompetent... LOL
Click to expand...
Click to collapse
maybe its something to do with the drivers in your c drive too many drivers not good maybe u have to try format your comp and start new
It actually is a fresh format as of 2 weeks ago.
Sent from my LG-D851 using Tapatalk
Sounds like you didn't install the right drivers
Happen to have a link to the drivers you installed to make it work?
Here's the name of the driver I used:
LGUnitedMobileDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3.exe
Sent from my LG-D851 using Tapatalk
Those are the ones. I would uninstall thru windows. Also uninstall any other phone drivers you have restart computer. Redownload fresh drivers then install them. Connect phone and let is load as normal. First time will take a bit. When you get pop up saying that have installed correctly then disconnect phone and do it again. Should work perfect. I installed lg PC suits to make sure it saw my phone
BACARDILIMON said:
Those are the ones. I would uninstall thru windows. Also uninstall any other phone drivers you have restart computer. Redownload fresh drivers then install them. Connect phone and let is load as normal. First time will take a bit. When you get pop up saying that have installed correctly then disconnect phone and do it again. Should work perfect. I installed lg PC suits to make sure it saw my phone
Click to expand...
Click to collapse
No dice. Uninstalled LG United Mobile Driver package through "Control Panel" "Add/Remove Programs", reset computer, installed freshly downloaded copy of the LG United Mobile Drivers, reset computer, then plugged the phone in.
Same error message.
I haven't had any other phones connected to this computer since the reformat, so there were no other phone drivers to uninstall.
OK then install lg suite. I will find the link
---------- Post added at 11:49 AM ---------- Previous post was at 11:47 AM ----------
https://2acc1-downloads.phpnuke.org/en/c152286/lg-pc-suite
---------- Post added at 11:50 AM ---------- Previous post was at 11:49 AM ----------
If that does not work then it is your PC bro. Something might be lock down. Disable all firewalls and virus protection and try again.
BACARDILIMON said:
OK then install lg suite. I will find the link
---------- Post added at 11:49 AM ---------- Previous post was at 11:47 AM ----------
https://2acc1-downloads.phpnuke.org/en/c152286/lg-pc-suite
---------- Post added at 11:50 AM ---------- Previous post was at 11:49 AM ----------
If that does not work then it is your PC bro. Something might be lock down. Disable all firewalls and virus protection and try again.
Click to expand...
Click to collapse
Just not meant to be, I guess. Not happening any which way I go.
Just a quick questions. What version of windows are you running. Also you did run windows update and installed all of windows updates. That process alone took me a bunch of hours to complete
BACARDILIMON said:
Just a quick questions. What version of windows are you running. Also you did run windows update and installed all of windows updates. That process alone took me a bunch of hours to complete
Click to expand...
Click to collapse
It's Windows XP Professional 32-bit, and yes, I ran all the windows updates.
I guess at least I can use ADB to push/pull files to/from the phone. It's just nowhere near as convenient.
Boostjunky said:
It's Windows XP Professional 32-bit, and yes, I ran all the windows updates.
I guess at least I can use ADB to push/pull files to/from the phone. It's just nowhere near as convenient.
Click to expand...
Click to collapse
I am sorry man that sucks. I just don't understand why. If you can use adb then drivers are installed. And the program PC suite should load everything in place for you. I sorry bro.
BACARDILIMON said:
I am sorry man that sucks. I just don't understand why. If you can use adb then drivers are installed. And the program PC suite should load everything in place for you. I sorry bro.
Click to expand...
Click to collapse
It's all good, man. I appreciate the suggestions.
Sent from my LG-D851 using Tapatalk
worked for me after i installed wmp11
http://answers.microsoft.com/en-us/...e/aba95758-3b38-47b6-9ae4-56c1d9e7c916?auth=1
Same thing for me, but...
I traveled the EXACT path with my S3. I also had XP Pro 32 bit on my comp. I tried all the same would-be solutions listed in this thread with 0% working to fix the error. I however, could not use ADB. My phone literally did not show up anywhere when plugged into my laptop. I downloaded the Samsung toolkit offered her on XDA and it was useless as well. Over the past 1.5 years I would periodically start a new internet search hoping to find some new advice but never made any progress. I had the paid version of Solid Explorer installed on my phone as my file explorer and realized it had a FTP file transfer option and used that instead of USB made. This solution ended up being an easier way to access my device and SD card files so I gave up.
Fast forward to today and same problem exists with my S4 except the first time I plugged into my comp I saw a pop up window on my device that said something like...must have Service Pack 3 installed...WMP v.10 or higher...yada yada. Now I do have WMP 10 but I show Service Pack 1 and 2 only when I look at installed programs. I used to have Service Pack 3 and don't know how that changed. I'm gunna look into finding a download for SP 3 but not holding my breath anything will come of it.
I'll check back if my situation improves, but in the mean time I guess an install of Solid Explorer is due for my new phone.

Categories

Resources