Develop Bugs

[HOW TO] Extended Power Menu with no header (reboot / download / recovery)

[HOW TO] Extended Power Menu (reboot / download / recovery) with no header
This HOW TO is rewritten from a French tutorial (HERE) itself rewritten from a XDA tutorial (HERE, and modified using this other one : HERE
Thanks to :
Okarin
untermensch
PaoloM70
Click to expand...
Click to collapse
warnings :
- This tutorial is for people who know what they will do, a mistake can fit your phone unusable so ...
- A modification of system files is always a delicate operation, pay attention and do not rush
Click to expand...
Click to collapse
Prerequisites :
First and foremost, you must master the decompilation / recompilation of APK and JAR using APK_Manager and smali/baksmali.
Click to expand...
Click to collapse
Mod the power menu :
Here is the way to add the options "Reboot", "Recovery" and "Download" to the Power menu (long press the power button)
For this part, we will work on 2 files:
framework res.apk
android.policy.jar
Click to expand...
Click to collapse
You can decompile the first with APK Manager, and the second with baksmali.
1/ framework-res.apk :
Extract it with APK_Manager (extracted in /project folder)
a/ Then, before going any further, you will have to find three new .PNG images to be displayed in the power menu, and name them :
"ic_lock_reboot.png" for reboot menu
"ic_lock_recovery.png" to enter recovery
"ic_lock_download.png" for download Mode
Click to expand...
Click to collapse
Place these 3 images in the : APK_Manager/project/framework-res.apk/res/drawable-hdpi
where you will find the other pictures already in the menu concerned.
It is easier for beginners to add customised icons (like for power off, silent or plane modes icons )after recompilation, using 7zip for example. .
b/ With NotePad + +, edit the file " res/values/strings.xml "
Go to the end of the file, and add before the last line "</resources>", the three lines:
Code:
<string name="reboot_recovery">Recovery</string>
<string name="reboot_download">Download</string>
<string name="reboot">Reboot</string>
This should give you something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
c/ Save your file.
d/ Now you can recompile the file "framework-res.apk" with APK Manager.
Remember that this is an APK system and delete the "keep/resources.arsc", since we have modified an XML file.
You will have a your moded apk here : "place-apk-here-for-modding/unsignedframework-res.apk"
Warning: You should not have errors when you re-compil. don't forget to add 3 new icons;
e/ using APK-Manager, decompil "place-apk-here-for-modding/unsignedframework-res.apk".
*Go to res/values/public.xml and edit with Notepad ++
*public.xml is auto-generated from others modifications during APK_MANAGER re-compilation. 6 new lines have been added, with 6 new Hex numbers. You will need these numbers later ...
Look for :
Code:
<public type="string" name="reboot" id="[B]0x01040488[/B]" />
<public type="string" name="reboot_recovery" id="[B]0x01040489[/B]" />
<public type="string" name="reboot_download" id="[B]0x0104048a[/B]" />
and for :
Code:
<public type="drawable" name="ic_lock_reboot" id="[B]0x010803d2[/B]" />
<public type="drawable" name="ic_lock_recovery" id="[B]0x010803d3[/B]" />
<public type="drawable" name="ic_lock_download" id="[B]0x010803d4[/B]" />
f/ Now you just have to rename "place-apk-here-for-modding/unsignedframework-res.apk" to "framework-res.apk" and voila!
Edit : never sign a system File using APK_Manager.
Here is the first part ended.
A tip, try this file on your phone, if it restarts fine, then the mod is correct, otherwise you can start over
It is important to test step by step, because it lets you know exactly from witch file comes the error.
2/ Now, we attack the second file "android.policy.jar".
Once decompiled with baksmal, edit the "out/com/android/internal/policy/impl/GlobalActions.smali."
Caution: Do not confuse it with the file "GlobalActions$Action.Smali"
a/ Find the line ".method private createDialog()Landroid/app/AlertDialog;"
then a few lines below, replace "const/4 v9, 0x4" with "const/4 v9, 0x7".
This line indicates the number of menu entries of extinction, we move from 4 to 7 (3 mor entries). You should have this after the changes made:
b/ Then find the line "
Code:
invoke-static {v0}, Lcom/google/android/collect/Lists;->newArrayList([Ljava/lang/Object;)Ljava/util/ArrayList;
" and insert just above:
Code:
const/4 v1, 0x4
new-instance v2, Lcom/android/internal/policy/impl/GlobalActions$8;
const v3, 0x10803d2
const v4, 0x1040488
invoke-direct {v2, p0, v3, v4}, Lcom/android/internal/policy/impl/GlobalActions$8;-><init>(Lcom/android/internal/policy/impl/GlobalActions;II)V
aput-object v2, v0, v1
const/4 v1, 0x5
new-instance v2, Lcom/android/internal/policy/impl/GlobalActions$9;
const v3, 0x10803d3
const v4, 0x1040489
invoke-direct {v2, p0, v3, v4}, Lcom/android/internal/policy/impl/GlobalActions$9;-><init>(Lcom/android/internal/policy/impl/GlobalActions;II)V
aput-object v2, v0, v1
const/4 v1, 0x6
new-instance v2, Lcom/android/internal/policy/impl/GlobalActions$10;
const v3, 0x10803d4
const v4, 0x104048a
invoke-direct {v2, p0, v3, v4}, Lcom/android/internal/policy/impl/GlobalActions$10;-><init>(Lcom/android/internal/policy/impl/GlobalActions;II)V
aput-object v2, v0, v1
You will notice in the code, the previous hex numbers generated. You have to modify the hex numbers quoted with the hex numbers you found in step 2 after decompilation of unsignedframework-res.apk
Warning in this code, the hex numbers have a 0 in less after the "0x" like : 0x1234567... and not 0x011234567 like in string.xml[/COLOR]...
Please not in the code you just added the GlobalActions$8, GlobalActions$9, GlobalActions$10 : you will add files .smali with same name later. If in your firmware GlobalActions$8 is already existing, then modify the "$X" to follow last used number
To help, here's what you should have:
3/ If you want to remove the header of the extended power menu, not having to scroll,
a/ search for ".method private prepareDialog()",
then look a few lines below, you should find "const v4, 0x104014a"
where This hexadecimal digit corresponds to the entry "<public type="string"name="global_actions" id="0x0104014a" /> in the "public.xml" file, which itself refers to the text of the menu in" string.xml " :
b/ find the corresponding hexadecimal number 0xXXXXX to the entry "<string name="config_tether_apndata" />" in the "string.xml" file. This entry has no text.
Now replace in "const v4, 0x104014a" with "const v4, 0xXXXXX," so it will not show anything in the power menu.
Save the file.
c/ Come on, we're almost there ...
Now copy the "out/com/android/internal/policy/impl/GlobalActions$4.Smali" to "out/com/android/internal/policy/impl/GlobalActions$8.Smali".
We choose #4 because it is one that contains the shutdown of the phone. We will rename it 8 because it's 8 in the next free issue ...
Remember this if ever in a future version of the files they are change.
d/ Now open the new file "out/com/android/internal/policy/impl/GlobalActions$8.Smali" and replace in, all occurrences of "\GlobalActions$4" with "\GlobalActions$8"
Then, Replace :
Code:
const/4 v1, 0x1
invoke-static {v0, v1}, Lcom/android/internal/app/ShutdownThread;->shutdown(Landroid/content/Context;Z)V
With :
Code:
const/4 v1, 0x1
const-string v2, "now"
invoke-static {v0, v2, v1}, Lcom/android/internal/app/ShutdownThread;->reboot(Landroid/content/Context;Ljava/lang/String;Z)V
e/ Save the file and copy it to "out/com/android/internal/policy/impl/GlobalActions$9.Smali"
Open it and replace in, all occurrences of "\GlobalActions$8" with "\GlobalActions$9
and
const-string v2, "now" with const-string v2, "recovery"
f/ Save the file and copy it to "out/com/android/internal/policy/impl/GlobalActions$10.Smali"
Open it and replace in, all occurrences of "\GlobalActions$9" with "\GlobalActions$10
and
const-string v2, "recovery" with const-string v2, "download"
Save the file and then ... compile it all!
The result, you will see that I also forgot to replace an icon:

Thanks you! finally someone willing to write a tutorial on this.

great tutorial.
thanx, we all need help sometimes

Excellent. Now for a tutorial on how to get the mobile data toggle in the notification bar and we can all build custom roms.
Sent from my GT-I9100 using Tapatalk

Wow, u really went the whole 9 yards explaining this, thanks, as always grateful for ur sharing....

Seems like you put a lot of time and effort in this post.
Very good and clear instructions on something I wanted to add to my custom rom for a long time. (without just adding some files)
Thank you very much.

No credit for the how to you copied this from?
what a shame
http://forum.xda-developers.com/showthread.php?t=811532

Nice guide. Two things when using apkmanager:
1) Never ever edit the public.xml
2) When Recompiling: Never sign system files. Copy their signature!
Sent from my GT-I9100 using XDA Premium App

designgears said:
No credit for the how to you copied this from?
what a shame
http://forum.xda-developers.com/showthread.php?t=811532
Click to expand...
Click to collapse
as Cognition user i can only agree with "my" developer, that most of the statings above are simply coppied - Ctrl+a--->Ctrl+V ---> well done

_JKay_ said:
Nice guide. Two things when using apkmanager:
1) Never ever edit the public.xml
2) When Recompiling: Never sign system files. Copy their signature!
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
If we don't edit Public.xml, how are going to achieve this? I keep getting errors while recompiling using apkmanager? They sometimes don't even extract the resources.arsc and throw a lot of errors.
I'm working on adding a few options in the settings apk and neither apkmanger nor apktool is letting me decompile settings apk. It always throws errors. I need to decompile to edit a few xml in values which i don't find if i unzip it with 7-zip or winrar! Editing smali files is not a prob for now!
Any solutions?

@ sicopat
All three options call the Shutdown thread and present the "Your phone will shutdown" dialog. How do we change this?
And i also want to add the subtext in all three options in the main options, where are those located?

Ghostbustersin said:
If we don't edit Public.xml, how are going to achieve this? I keep getting errors while recompiling using apkmanager? They sometimes don't even extract the resources.arsc and throw a lot of errors.
I'm working on adding a few options in the settings apk and neither apkmanger nor apktool is letting me decompile settings apk. It always throws errors. I need to decompile to edit a few xml in values which i don't find if i unzip it with 7-zip or winrar! Editing smali files is not a prob for now!
Any solutions?
Click to expand...
Click to collapse
public.xml is auto-generated! Try add a string or a png and compile then decompile again. You will see that the new resources has been added to the public.xml
The ids MUST be unique and increased by one! Its all done in the apktool!

designgears said:
No credit for the how to you copied this from?
what a shame
http://forum.xda-developers.com/showthread.php?t=811532
Click to expand...
Click to collapse
You are totaly right.
I didn't find lines to modify,
I just built a new How To, from a french one I found here : http://www.galaxys-team.fr/viewtopic.php?f=6&t=14562
I believe this french How To took its inspiration from this thread : http://forum.xda-developers.com/showthread.php?t=811532
I didn't found this thread myself, you found it for me.
I finished to write this thread at 1h30 AM and I am going just now correct this mistake ...
Sorry for this

_JKay_ said:
Nice guide. Two things when using apkmanager:
1) Never ever edit the public.xml
2) When Recompiling: Never sign system files. Copy their signature!
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
1/ Why never edit public.xml ?
2/ You are right for that

_JKay_ said:
public.xml is auto-generated! Try add a string or a png and compile then decompile again. You will see that the new resources has been added to the public.xml
The ids MUST be unique and increased by one! Its all done in the apktool!
Click to expand...
Click to collapse
Ok but i never had errors using this How To and so, modifing public.xml.
But I will add your recommandation for people to try this How To, without modifing public.xml.
Thanks

sicopat said:
I insist on it here: only perform additions, never modify the images during the decompilation / recompilation of APK with APK_Manager.
Thanks
Click to expand...
Click to collapse
Why this statement? I'd rather say ONLY edit PNGs when decompiled!

_JKay_ said:
Why this statement? I'd rather say ONLY edit PNGs when decompiled!
Click to expand...
Click to collapse
Cause when using Apk manager, during re-compilation a keep folder is created and if you don't delete every files (and png) you modified in this keep folder, then after recompilation you will have olds .png from the keep folder and not your new png from your project folder.
It is easier to just push your new .png after recompilation.
I am just a noob who want to help a little with my short experience.
I am ready to learn and to optimise my how to
Sent from my GT-I9100 using XDA Premium App

sicopat said:
Cause when using Apk manager, during re-compilation a keep folder is created and if you don't delete every files (and png) you modified in this keep folder, then after recompilation you will have olds .png from the keep folder and not your new png from your project folder.
It is easier to just push your new .png after recompilation.
I am just a noob who want to help a little with my short experience.
I am ready to learn and to optimise my how to
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Its true you need to delete the files you modify from the keep folder. But you should never try and modify 9patch pngs if they are not decompiled!!

_JKay_ said:
Its true you need to delete the files you modify from the keep folder. But you should never try and modify 9patch pngs if they are not decompiled!!
Click to expand...
Click to collapse
Yes i agree with you.
But in this How to, you don't need to edit 9patch.png
For begginers i think it's easier to push the customised reboot, power off, download mode icons ... after recompilation.
Sent from my GT-I9100 using XDA Premium App

sicopat said:
Yes i agree with you.
But in this How to, you don't need to edit 9patch.png
For begginers i think it's easier to push the customised reboot, power off, download mode icons ... after recompilation.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Ok...... But I think this could make beginners believe that this is always the case and how it should always be done. I rather teach them the right way

[MOD] no am/pm on ics status bar for the devs

The rom devs will know what this is ....
did this for skyrocket devs but works for your ics ports as well.
made this thread over here so i can stop getting pms from this side on howtos...
info http://forum.xda-developers.com/showthread.php?t=1591030
Remove AM/PM
1. Decompile SystemUI.apk
2. Goto: /systemui.apk /smali/com/android/systemui/statusbar/policy
3. edit Clock.smali
4. the line you want is typically 36 (its the static constructor)
5. change "const/4 v0, 0x0" to "const/4 v0, 0x2"
6. yup thats right, 1 character edit!
7. save and recompile
Color for Clock (if you havnt already)
1. Decompile SystemUI.apk
2. Goto: /res/values/
3. edit styles.xml
4. the style you want is "<style name="TextAppearance.StatusBar.Clock" parent="@android:style/TextAppearance.StatusBar.Icon">"
5. change "<item name="android:textColor">#ff33b5e5</item>" under this style (this is android blue, change at will)
6. save and recompile
enjoy!!

Will be put to use. Thanks.

theHOTNESS said:
The rom devs will know what this is ....
did this for skyrocket devs but works for your ics ports as well.
made this thread over here so i can stop getting pms from this side on howtos...
info http://forum.xda-developers.com/showthread.php?t=1591030
Remove AM/PM
1. Decompile SystemUI.apk
2. Goto: /systemui.apk /smali/com/android/systemui/statusbar/policy
3. edit Clock.smali
4. the line you want is typically 36 (its the static constructor)
5. change "const/4 v0, 0x0" to "const/4 v0, 0x2"
6. yup thats right, 1 character edit!
7. save and recompile
Color for Clock (if you havnt already)
1. Decompile SystemUI.apk
2. Goto: /res/values/
3. edit styles.xml
4. the style you want is "<style name="TextAppearance.StatusBar.Clock" parent="@android:style/TextAppearance.StatusBar.Icon">"
5. change "<item name="android:textColor">#ff33b5e5</item>" under this style (this is android blue, change at will)
6. save and recompile
enjoy!!
Click to expand...
Click to collapse
Tried it on stock FD10 ICS4.0.3 build for E4GT.
Didn't work unfortunately.
I found 3 instances of const/4 v0, 0x0 and changing any of them or any combination of 2 of them didn't remove AM/PM from status bar clock.
Any ideas or suggestions?

I also am trying this mod and would like to know what are the lines before or after the mod. Just to make sure I am making the changes to the right one since I also see 3 of them... Thanks in Advance

agat63 said:
Tried it on stock FD10 ICS4.0.3 build for E4GT.
Didn't work unfortunately.
I found 3 instances of const/4 v0, 0x0 and changing any of them or any combination of 2 of them didn't remove AM/PM from status bar clock.
Any ideas or suggestions?
Click to expand...
Click to collapse
Use notepad++ and go to line 36 and change the value
Sent from my SGH-T989 using Tapatalk 2

`SBR` said:
Use notepad++ and go to line 36 and change the value
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
actually I do not see static constructor but public constructor and lines 34-41 show this
Code:
# direct methods
.method public constructor <init>(Landroid/content/Context;)V
.locals 1
.parameter "context"
.prologue
.line 72
const/4 v0, 0x0

`SBR` said:
Use notepad++ and go to line 36 and change the value
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
I'm using notepad++.
There is no instance/value on line 36 in ICS file for E4GT.
First instance is on line 39.
Did try it. No dice.
And as mentioned above did try any combination of 3 instances of that value thru the file. No go.
May be ICS for E4GT is different and we should look somewhere else.

playya said:
actually I do not see static constructor but public constructor and lines 34-41 show this
Code:
# direct methods
.method public constructor <init>(Landroid/content/Context;)V
.locals 1
.parameter "context"
.prologue
.line 72
const/4 v0, 0x0
Click to expand...
Click to collapse
agat63 said:
I'm using notepad++.
There is no instance/value on line 36 in ICS file for E4GT.
First instance is on line 39.
Did try it. No dice.
And as mentioned above did try any combination of 3 instances of that value thru the file. No go.
May be ICS for E4GT is different and we should look somewhere else.
Click to expand...
Click to collapse
Hope you're looking into the file in the below path.
SystemUI\smali\com\android\systemui\statusbar\policy\Clock.smali
and search for the below line
Code:
sput v0, Lcom/android/systemui/statusbar/policy/Clock;->AM_PM_STYLE:I
above the line
Code:
const/4 v0, 0x0
change the 0 to 2 like below, it will be like this .
Code:
const/4 v0, 0x2
Save it and decompile the systemui.apk

`SBR` said:
Hope you're looking into the file in the below path.
SystemUI\smali\com\android\systemui\statusbar\policy\Clock.smali
and search for the below line
Code:
sput v0, Lcom/android/systemui/statusbar/policy/Clock;->AM_PM_STYLE:I
above the line
Code:
const/4 v0, 0x0
change the 0 to 2 like below, it will be like this .
Code:
const/4 v0, 0x2
Save it and decompile the systemui.apk
Click to expand...
Click to collapse
yea been there and its a no go apparently my Clock.smali is dfferent

playya said:
yea been there and its a no go apparently my Clock.smali is dfferent
Click to expand...
Click to collapse
I confirm that.
There is no such line in Clock.smali in E4GT ICS SystemUI.apk smali file.
There has been a lot of changes in apk, dex and jar files from GB to ICS.

agat63 said:
I confirm that.
There is no such line in Clock.smali in E4GT ICS SystemUI.apk smali file.
There has been a lot of changes in apk, dex and jar files from GB to ICS.
Click to expand...
Click to collapse
shhhhhhoooot I am trying to do it on GB but I looked in ICS as well and did not see it. I looked in services.jar and did not see it.. Believe me I know it should be out there somewhere but other than TSM mods I can not seem to find any tutorials on how to just remove am/pm... If anyone knows how to do this on GB or ICS which may be similiar please let me know. Its for the E4GT
Thx

[MOD][GUIDES] Unrestricted Native Tethering + Evade Data Cap Throttle + MORE!

Hello to all Developers and XDA members! I have come here to give you a guide on how you can use native tethering without restrictions and here is how you can do it!
What Is Required...
★ First you need to have experience and know how to decompile/recompile apks with Apktools, apkmanager, smali, and baksmali
★ Have 7-zip installed onto your computer/laptop
★ Make sure you have Notepad++ also installed!
★HOW TO ENABLE NATIVE TETHERING WITHOUT RESTRICTIONS★
STEP 1
★ Go into your system/framework folder and take out your "framework-res.apk"
★ Then use one of the applications such as apktools or apkmanager and then use the commands to decompile the framework-res.apk
★ Once you have decompiled the framework-res.apk, go to:
res/values/arrays.xml
Click to expand...
Click to collapse
Now with Notepad++ go and find:
Code:
<string-array name="config_mobile_hotspot_provision_app">
And then it will look something like this:
Code:
<string-array name="config_mobile_hotspot_provision_app">
<item>com.sec.tetheringprovision</item>
<item>com.sec.tetheringprovision.TetheringProvisionActivity</item>
</string-array>
Now what your going to need to do is remove both of the <item> lines that has "tetheringprovision" in them, the "string-" in the first line, and then remove the whole </string-array> from the last line, once you do it will look something like this:
Code:
<array name="config_mobile_hotspot_provision_app" />
Once your done now Recompile your framework-res.apk using apktools or apkmanager and your DONE!!!
NOTE: Remember by removing those "com.sec.tetheringprovision" lines in the arrays.xml, it bypasses all the checks, There will be no more popup message that's telling you to upgrade to a T-Mobile Hotspot Plan, and you will get no errors!. There is no need for any third party apps or creating a APN just to have Tether to work properly!
STEP 2
The next step that your going to have to do is go into your roms:
system/app
Click to expand...
Click to collapse
folder and then remove:
TetheringProvision.apk
Click to expand...
Click to collapse
This TetheringProvision.apk is no longer needed. If you were to remove it without doing the framework-res.apk mod, you will get constant force closes and a "Tetheringprovision Is Not Responding Message" after you have enabled Mobile Hotspot on your Samsung Galaxy S3 device. But since you have modded it, you can just delete it.
STEP 3
Now for this step, this is going to give you the opportunity to edit/remove the locked APNS And also it will show you how you can see any of the hidden APN's from the "Access Point Names" Menu which is in Settings-More Settings-Mobile Networks-Access Point Names. Also this step your going to have to change the APN site name which makes you tether without bringing you into the T-Mobile Hotspot Browser Page.
First your going to have to go into your roms folder which is:
system/csc
Click to expand...
Click to collapse
And then open up "customer.xml" with your notepad++ for editing.
Now go all the way to the bottom of this file and you will see the last APN Tethering setting which should looks like this:
Code:
<NetworkName>T-Mobile</NetworkName>
<Editable>no</Editable>
<EnableStatus>enable</EnableStatus>
<ProfileName>T-Mobile Tethering</ProfileName>
<Auth>none</Auth>
<Bearer>ps</Bearer>
<Protocol>http</Protocol>
<Proxy>
<EnableFlag>off</EnableFlag>
</Proxy>
<PSparam>
<APN>pcweb.tmobile.com</APN>
Now what your going to have to do is change where it says <Editable>no</Editable> into <Editable>yes</Editable>. By changing this, this will give you the permission to edit/remove this APN setting. REMEMBER: This APN Tethering setting only shows after you first use Tethering! And once your done with that go to where it says <APN>pcweb.tmobile.com</APN> and change it into <APN>epc.tmobile.com</APN>. By changing this APN site name it should give you total access for you to tether without bringing you into the T-Mobile Hotspot Browser Page from your PC's internet browser.
Once done it will look like this:
Code:
<NetworkName>T-Mobile</NetworkName>
[B]<Editable>yes</Editable>[/B]
<EnableStatus>enable</EnableStatus>
<ProfileName>T-Mobile Tethering</ProfileName>
<Auth>none</Auth>
<Bearer>ps</Bearer>
<Protocol>http</Protocol>
<Proxy>
<EnableFlag>off</EnableFlag>
</Proxy>
<PSparam>
[B]<APN>epc.tmobile.com</APN>[/B]
Now save this file with the new edits with Notepad++ and your DONE!
But your not done yet with this step, your going to have to do one last thing. The Tethering APN that you have modified from "above" is still hidden. Now what your going to have to do is go into your roms folder again to:
system/csc
Click to expand...
Click to collapse
And then open up "feature.xml" with your notepad++ for editing.
Now with Notepad++ go and find:
<CscFeature_Setting_HideApnList>pcweb.tmobile.com</CscFeature_Setting_HideApnList>
Click to expand...
Click to collapse
Now DELETE THIS WHOLE LINE! [This hides the Tethering APN that you have modified from "above" from view]. Once your done save this file with Notepad++ and THATS IT! Now Go Enjoy Your Native Tethering!!!
STILL HAVING PROBLEMS WITH TETHERING EVEN AFTER THE MOD? - Go into "Settings-More Settings-Mobile Networks-Access Point Names" and then press your phone's "Menu Settings Key" on the bottom left of your phone and then select "Reset To Default" and see if that helps.
★HOW TO ENABLE BLUETOOTH TETHERING★
This guide will show you how you can enable bluetooth tethering so here is how you can do it!
STEP 1
★ Go into your system/framework folder and take out your "framework-res.apk"
★ Then use one of the applications such as apktools or apkmanager and then use the commands to decompile the framework-res.apk
★ Once you have decompiled the framework-res.apk, go to:
res/values/arrays.xml
Click to expand...
Click to collapse
Now with Notepad++ go and find:
Code:
<array name="config_tether_bluetooth_regexs" />
And then it will look something like this:
Code:
<array name="config_tether_wimax_regexs" />
<array name="config_tether_bluetooth_regexs" />
<array name="config_tether_dhcp_range" />
Now what your going to need to do is add "string-" right before the "array" in the beginning of the config_tether_bluetooth_regexs, then under it add <item>bnep\\d</item> and make sure that the <item> from the beginning is aligned the same like the other <item> from the arrays.xml. Once you do, add </string-array> right under the "bnep\\d" line, then it will look something like this:
Code:
<array name="config_tether_wimax_regexs" />
[B]<string-array name="config_tether_bluetooth_regexs">
<item>bnep\\d</item>
</string-array>[/B]
<array name="config_tether_dhcp_range" />
Once your done now Recompile your framework-res.apk using apktools or apkmanager and your DONE!!!
★HOW TO EVADE/REMOVE DATA CAP THROTTLING★
This guide will show you how you can evade/remove data cap throttling and this is good for the people who don't have a unlimited data plan for their phone's carrier so here is how you can do it!
STEP 1
★ Go into your system/framework folder and take out your "services.jar"
★ Then use one of the applications such as apktool and then use baksmali commands to decompile and extract the classes.dex from the services.jar
★ Once you have decompiled the services.jar, go to:
com/android/server
Click to expand...
Click to collapse
Now open up "ThrottleService.smali" with your notepad++ for editing.
Once your in here go and find:
Code:
.method static synthetic access$1002(Lcom/android/server/ThrottleService;J)J
And then you will see something like this:
Code:
.method static synthetic access$1002(Lcom/android/server/ThrottleService;J)J
.registers 3
.parameter "x0"
.parameter "x1"
.prologue
.line 71
iput-wide p1, p0, Lcom/android/server/ThrottleService;->mMaxNtpCacheAge:J
return-wide p1
.end method
Now what your going to need to do is add an empty space below ".line 71" and then above "iput-wide" your going to add "const-wide/16 p1, 0x0", once you do it will look something like this:
Code:
.method static synthetic access$1002(Lcom/android/server/ThrottleService;J)J
.registers 3
.parameter "x0"
.parameter "x1"
.prologue
.line 71
[B]const-wide/16 p1, 0x0[/B]
iput-wide p1, p0, Lcom/android/server/ThrottleService;->mMaxNtpCacheAge:J
return-wide p1
.end method
By adding that, this will invoke the ".method private checkThrottleAndPostNotification(J)V" and also the clearThrottleAndNotification()V which are both in the "ThrottleService$MyHandler.smali" which looks like this:
Code:
.method private checkThrottleAndPostNotification(J)V
.registers 28
.parameter "currentTotal"
.prologue
.line 588
move-object/from16 v0, p0
iget-object v0, v0, Lcom/android/server/ThrottleService$MyHandler;->this$0:Lcom/android/server/ThrottleService;
move-object/from16 v21, v0
#getter for: Lcom/android/server/ThrottleService;->mPolicyThreshold:Ljava/util/concurrent/atomic/AtomicLong;
invoke-static/range {v21 .. v21}, Lcom/android/server/ThrottleService;->access$500(Lcom/android/server/ThrottleService;)Ljava/util/concurrent/atomic/AtomicLong;
move-result-object v21
invoke-virtual/range {v21 .. v21}, Ljava/util/concurrent/atomic/AtomicLong;->get()J
move-result-wide v15
.line 589
.local v15, threshold:J
const-wide/16 v21, 0x0
cmp-long v21, v15, v21
if-nez v21, :cond_18
.line 590
invoke-direct/range {p0 .. p0}, Lcom/android/server/ThrottleService$MyHandler;->clearThrottleAndNotification()V
.line 663
:cond_17
:goto_17
return-void
.line 596
:cond_18
move-object/from16 v0, p0
Now once your done with modifying the "ThrottleService.smali", Recompile your services.jar using apktool and smali commands and your DONE!
IMPORTANT REMINDER - This mod works best for the people who DON'T have a unlimited data plan so it will be good for devs to make a flashable.zip in their OP with this mod with their roms services.jar which could be different "since some devs maybe did other mods/tweaks into their roms services.jar" so the users that be having any throttling issues can flash it. Also use at your own risk!

Nice find!

evil1art said:
Nice find!
Click to expand...
Click to collapse
Thanks! Im trying to find all the ways and which apks tmobile can check for UAstrings, which makes them able to give them the info that we are using tethering for free. Im going to dig even more though.
Sent from my SGH-T999 using Tapatalk 2

jovy23 said:
Thanks! Im trying to find all the ways and which apks tmobile can check for UAstrings, which makes them able to give them the info that we are using tethering for free. Im going to dig even more though.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Thats works

I must have done something wrong because this borked my install. Any possibility of a flashable zip or something?

Hi! The mod looks great. I have two short questions though:
1. Is it exclusive to the T-Mobile Galaxy S III, or could possibly work for other variants of the device as well, on which the carrier might have enforced the same restrictions?
2. Is it exclusive to the Galaxy S III, or could possibly work for other similar devices by Samsung like the Galaxy Note II as well?
Thanks.

Would also like to know if there could be a flashable zip made for us noobs lol
Sent from my SGH-T999 using Tapatalk 2

chrisa887 said:
Would also like to know if there could be a flashable zip made for us noobs lol
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
A mod like this should be cooked into the rom. If can break mods if not

evil1art said:
A mod like this should be cooked into the rom. If can break mods if not
Click to expand...
Click to collapse
So, if I hear you right, you are saying watch for this to be available in Wicked JB soon? :cyclops:

Maybe djintrigue808 Can cook this up in the Frosty JB roms

bradleyw801 said:
So, if I hear you right, you are saying watch for this to be available in Wicked JB soon? :cyclops:
Click to expand...
Click to collapse
Maybe its easy enough
---------- Post added at 05:20 PM ---------- Previous post was at 05:20 PM ----------
nardone24 said:
Maybe djintrigue808 Can cook this up in the Frosty JB roms
Click to expand...
Click to collapse
I think dj stopped tw development

evil1art said:
Maybe its easy enough
---------- Post added at 05:20 PM ---------- Previous post was at 05:20 PM ----------
I think dj stopped tw development
Click to expand...
Click to collapse
Yipee! Will it be in the Wicked 4.2? I'm looking forward on this mod apply to wicked ROM. Thanks
Sent from TMO Galaxy S3

Works great thanx

HQRaja said:
Hi! The mod looks great. I have two short questions though:
1. Is it exclusive to the T-Mobile Galaxy S III, or could possibly work for other variants of the device as well, on which the carrier might have enforced the same restrictions?
2. Is it exclusive to the Galaxy S III, or could possibly work for other similar devices by Samsung like the Galaxy Note II as well?
Thanks.
Click to expand...
Click to collapse
It should work on other variants i have to check the framework-res on the other carriers stock firmware to see. I will be updating this post with the workarounds for the other carriers also
Sent from my SGH-T999 using Tapatalk 2

chrisa887 said:
Would also like to know if there could be a flashable zip made for us noobs lol
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I would say decompiling and doing this mod is the way to go because if i made a flashable.zip and you flashed it on any other rom, it could break/remove the other devs mods plus theming that they have cooked into their framework-res.apk.
Sent from my SGH-T999 using Tapatalk 2

Amazing find my friend! Thank you and will give credit were it it due.

Jamison904 said:
Amazing find my friend! Thank you and will give credit were it it due.
Click to expand...
Click to collapse
Your very welcome man!
Sent from my SGH-T999 using Tapatalk 2

"Amazing find my friend! Thank you and will give credit were it it due."
@Jameson904 - is there a good chance that this will be utilised in your next update?
BTW.. 3.7 is much appreciated
////ANDY

waiting for the 'flashable zip' =)

adulel08 said:
waiting for the 'flashable zip' =)
Click to expand...
Click to collapse
I posted about why there cant be a flashable.zip of it. It can break rom mods in them that a developer implemented.

[MOD][GUIDE]Enable and change color of %battery digits in 4.4 KitKat

So as you probably know by now, Android 4.4 came with a hidden feature in SystemUI to enable %battery within the battery icon when it's not charging. This can be accomplished by an app (credit to @kroegerama), an adb command, or a manual SystemUI smali edit (a quite easy one explained in this walkthrough). The problem is this text is the same color as the battery fill (white), making it useless until the battery is about 50% or less. I played around with the smali for a while and couldn't properly get the text to change colors (smali is certainly not my native tongue...), so I did it the old fashioned way. I changed it in source, built, and compared the results. With that, I'll show you how you can change the text color of the digits when %battery is enabled.
This tutorial will assume you have know how to use APKTool to decompile/recompile APKs while keeping their signatures in tact. There are walkthroughs that will show you how to accomplish this readily available. Method 1 will show you an easy way to change the color to black, and method 2 will show you how you can change things so you can set the text color to whatever you want, without having to figure out the java hex -> smali const equation (though if someone knows it I'm always loving to learn new things). This tutorial is for users on a DEODEXED ROM. If your ROM is odexed, it's probably easiest to deodex SystemUI, make the changes, then reodex ALWAYS HAVE A BACKUP READILY AVAILABLE IN CASE SOMETHING GOES WRONG!
Things you'll need:
APKTool
Notepad++
SystemUI.apk from your 4.4 ROM
Method 1 - an easy way to make the digits black.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Using APKTool, decompile SystemUI.apk
2. Open \smali\com\android\systemui\BatteryMeterView.smali in Notepad++
3. If you don't already have the white %battery enabled, enable it now. Find:
Code:
const-string v7, "status_bar_show_battery_percent"
const/4 v8, 0x0
and change 0x0 to 0x1
4. Now find:
Code:
iget-object v6, p0, Lcom/android/systemui/BatteryMeterView;->mTextPaint:Landroid/graphics/Paint;
const/4 v7, -0x1
and change "const/4 v7, -0x1" to "const/high16 v7, -0x100" (this is changing white (-0x1) to black (-0x100))
(Note: if you get an error regarding this line when recompiling, try "const/16 v7, -0x100" (without the "high". I know, where's the fun in that?))
4b. - Optional: If you'd like to change the font family, or make it bold, etc, you can do it here as well.
Search for:
Code:
const-string v6, "sans-serif-condensed"
const/4 v7, 0x0
"sans-serif-condensed" can be changed to "sans-serif" (or other families), and the result is slightly larger digits. The 0x0 is indicating it's normal style. Change this to 0x1 for Bold.
5. Save the changes and recompile the APK making sure to retain the original signature. Push back to /system/priv-app/ and set with RW/R/R permissions. Voila, now you have black text for your %battery
Method 2 - a few extra steps and a little more involved smali change, but will make it much easier to change the color to whatever you want once it's complete:
1. Using APKTool, decompile SystemUI.apk
2. Open \res\values\colors.xml
3. Under
Code:
<color name="batterymeter_bolt_color">#b2000000</color>
make a new line that reads
Code:
<color name="batterymeter_percent_color">#xxxxxxxx</color>
(where xxxxxxxx is an 8 digit hex color value - first 2 alpha, last 6 color):
4. Recompile the apk with the changes, preserving the signature
5. Decompile the new SystemUI that was just created
6. Open \res\values\public.xml and find:
Code:
<public type="color" name="batterymeter_percent_color" id="0x########" />
and write down/copy/take note of the 10 digit id number (0x########)
7. Open \smali\com\android\systemui\BatteryMeterView.smali in Notepad++
8. If you don't already have the white %battery enabled, enable it now. Find:
Code:
const-string v7, "status_bar_show_battery_percent"
const/4 v8, 0x0
and change 0x0 to 0x1
9. Now find:
Code:
iget-object v6, p0, Lcom/android/systemui/BatteryMeterView;->mTextPaint:Landroid/graphics/Paint;
const/4 v7, -0x1
invoke-virtual {v6, v7}, Landroid/graphics/Paint;->setColor(I)V
and replace it with the following, changing the id (0x########) with the one you previously made a note of:
Code:
iget-object v6, p0, Lcom/android/systemui/BatteryMeterView;->mTextPaint:Landroid/graphics/Paint;
const v7, 0x########
invoke-virtual {v5, v7}, Landroid/content/res/Resources;->getColor(I)I
move-result v7
invoke-virtual {v6, v7}, Landroid/graphics/Paint;->setColor(I)V
9b - Optional: If you'd like to change the font family, or make it bold, etc, you can do it here as well.
Directly under the code you just pasted, you'll see
Code:
const-string v6, "sans-serif-condensed"
const/4 v7, 0x0
"sans-serif-condensed" can be changed to "sans-serif" (or other families), and the result is slightly larger digits. The 0x0 is indicating it's normal style. Change this to 0x1 for Bold.
10. Save the changes and recompile the APK making sure to retain the original signature. Push back to /system/priv-app/ and set with RW/R/R permissions
Now if you want to change the color, just change the HEX value in \res\values\colors.xml and recompile
Building from source?
Method 1 when building from source:
-Open \frameworks\base\packages\SystemUI\src\com\android\systemui\BatteryMeterView.java.
-On line 191 you can turn the %battery on and off
-On line 208 you can set the %color.
Method 2 from source:
-Open \frameworks\base\packages\SystemUI\src\com\android\systemui\BatteryMeterView.java.
-On line 191 you can turn the %battery on and off, and on line 208 change (0xFF000000) to (res.getColor(R.color.batterymeter_percent_color)).
-Now open \frameworks\base\packages\SystemUI\res\values\colors.xml and add a line under "#B2000000" that reads "#XXXXXXXX" (where XXXXXXXX is your hex color value).
Happy Modding! :good:

homeslice976 said:
So as you probably know by now, Android 4.4 came with a hidden feature in SystemUI to enable %battery within the battery icon when it's not charging...
Happy Modding! :good:
Click to expand...
Click to collapse
Great guide :good:
As I'm running 4.4 odexed, I don't have access to the smali when decompiling SystemUI.apk so I went in a different direction and changed the colour of the battery icon (and a lot of other stuff too).

Spannaa said:
Great guide :good:
As I'm running 4.4 odexed, I don't have access to the smali when decompiling SystemUI.apk so I went in a different direction and changed the colour of the battery icon (and a lot of other stuff too).
Click to expand...
Click to collapse
Ah that's a good point. Odexed roms are going to be a little different, as you'll be working with Systemui.odex rather than Systemui.apk. I'll add that to the guide..

homeslice976 said:
So as you probably know by now, Android 4.4 came with a hidden feature in SystemUI to enable %battery within the battery icon when it's not charging. This can be accomplished by an app (credit to @kroegerama), an adb command, or a manual SystemUI smali edit (a quite easy one explained in this walkthrough). The problem is this text is the same color as the battery fill (white), making it useless until the battery is about 50% or less. I played around with the smali for a while and couldn't properly get the text to change colors (smali is certainly not my native tongue...), so I did it the old fashioned way. I changed it in source, built, and compared the results. With that, I'll show you how you can change the text color of the digits when %battery is enabled.
This tutorial will assume you have know how to use APKTool to decompile/recompile APKs while keeping their signatures in tact. There are walkthroughs that will show you how to accomplish this readily available. Method 1 will show you an easy way to change the color to black, and method 2 will show you how you can change things so you can set the text color to whatever you want, without having to figure out the java hex -> smali const equation (though if someone knows it I'm always loving to learn new things). This tutorial is for users on a DEODEXED ROM. If your ROM is odexed, it's the same idea, but you'll need to be working with SystemUI.odex and SystemUIapk, and decompliling/recompiling/pushing the odex file. Or deodex SystemUI before starting. ALWAYS HAVE A BACKUP READILY AVAILABLE IN CASE SOMETHING GOES WRONG!
Things you'll need:
APKTool
Notepad++
SystemUI.apk from your 4.4 ROM
Method 1 - an easy way to make the digits black.
1. Using APKTool, decompile SystemUI.apk
2. Open \smali\com\android\systemui\BatteryMeterView.smali in Notepad++
3. If you don't already have the white %battery enabled, enable it now. Find:
Code:
const-string v7, "status_bar_show_battery_percent"
const/4 v8, 0x0
and change 0x0 to 0x1
4. Now find:
Code:
iget-object v6, p0, Lcom/android/systemui/BatteryMeterView;->mTextPaint:Landroid/graphics/Paint;
const/4 v7, -0x1
and change "const/4 v7, -0x1" to "const/high16 v7, -0x100"
5. Save the changes and recompile the APK making sure to retain the original signature. Push back to /system/priv-app/ and set with RW/R/R permissions. Voila, now you have black text for your %battery
Method 2 - a few extra steps and a little more involved smali change, but will make it much easier to change the color to whatever you want once it's complete:
1. Using APKTool, decompile SystemUI.apk
2. Open \res\values\colors.xml
3. Under "#B2000000", make a new line that reads (where xxxxxxxx is an 8 digit hex color value - first 2 alpha, last 6 color):
Code:
#xxxxxxxx
4. Recompile the apk with the changes, preserving the signature
5. Decompile the new SystemUI that was just created
6. Open \res\values\public.xml and find:
Code:
and write down/copy/take note of the 10 digit id number
7. Open \smali\com\android\systemui\BatteryMeterView.smali in Notepad++
8. If you don't already have the white %battery enabled, enable it now. Find:
Code:
const-string v7, "status_bar_show_battery_percent"
const/4 v8, 0x0
and change 0x0 to 0x1
9. Now find:
Code:
iget-object v6, p0, Lcom/android/systemui/BatteryMeterView;->mTextPaint:Landroid/graphics/Paint;
const/4 v7, -0x1
invoke-virtual {v6, v7}, Landroid/graphics/Paint;->setColor(I)V
and replace it with the following, changing the id (0x########) with the one you previously made a note of:
Code:
iget-object v6, p0, Lcom/android/systemui/BatteryMeterView;->mTextPaint:Landroid/graphics/Paint;
const v7, 0x########
invoke-virtual {v5, v7}, Landroid/content/res/Resources;->getColor(I)I
move-result v7
invoke-virtual {v6, v7}, Landroid/graphics/Paint;->setColor(I)V
10. Save the changes and recompile the APK making sure to retain the original signature. Push back to /system/priv-app/ and set with RW/R/R permissions
Now if you want to change the color, just change the HEX value in \res\values\colors.xml and recompile
Building from source?
Method 1 when building from source:
-Open \frameworks\base\packages\SystemUI\src\com\android\systemui\BatteryMeterView.java.
-On line 191 you can turn the %battery on and off
-On line 208 you can set the %color.
Method 2 from source:
-Open \frameworks\base\packages\SystemUI\src\com\android\systemui\BatteryMeterView.java.
-On line 191 you can turn the %battery on and off, and on line 208 change (0xFF000000) to (res.getColor(R.color.batterymeter_percent_color)).
-Now open \frameworks\base\packages\SystemUI\res\values\colors.xml and add a line under "#B2000000" that reads "#XXXXXXXX" (where XXXXXXXX is your hex color value).
Happy Modding! :good:
Click to expand...
Click to collapse
This is a great tutorial for changing battery text color. In particular, I like your method 2. I can change color with success.

Sorry on offtopic.. Is there any solution to disable double press home button on cm11? Because home button has delay when I press it.. It is some kind of laggy ..
Sent from my One using Tapatalk

I wanna thank you.... Worked like a charm on Nexus 7 2013
Sent from my Nexus 7 using XDA Premium 4 mobile app

vrda08 said:
Sorry on offtopic.. Is there any solution to disable double press home button on cm11? Because home button has delay when I press it.. It is some kind of laggy ..
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Yes. See this ( http://forum.xda-developers.com/showthread.php?p=47660002) post. You'll want to set double tap to 0 for no action
mrjaydee82 said:
I wanna thank you.... Worked like a charm on Nexus 7 2013
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Glad its working!
Sent from my One using Tapatalk 4

homeslice976 said:
Yes. See this ( http://forum.xda-developers.com/showthread.php?p=47660002) post. You'll want to set double tap to 0 for no action
Glad its working!
Sent from my One using Tapatalk 4
Click to expand...
Click to collapse
Anyway to make the writing bigger or bolder Lol?
Sent from my Nexus 7 using XDA Premium 4 mobile app

mrjaydee82 said:
Anyway to make the writing bigger or bolder Lol?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sure is. That was my next venture. Should be simple enough though and when I've got it bI'll add to the walkthrough
Sent from my One using Tapatalk 4

homeslice976 said:
Sure is. That was my next venture. Should be simple enough though and when I've got it bI'll add to the walkthrough
Sent from my One using Tapatalk 4
Click to expand...
Click to collapse
Awesome ? can't wait
Sent from my Nexus 7 using XDA Premium 4 mobile app

@homeslice976 I try method 1 & 2 but not sucsess, would you mind to share your SystemUI.apk in method 1? Thanks
Device: Nexus 4
Rom: Stock KRT16S

Also interested on put this baby on my nexus 5 but to stupid to do it myself,any help will be much aprecieted.

mrjaydee82 said:
Anyway to make the writing bigger or bolder Lol?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Added notes in method 2 for making the digits slightly larger and/or bold..will keep playing to see if I can make them even larger
PigFire said:
@homeslice976 I try method 1 & 2 but not sucsess, would you mind to share your SystemUI.apk in method 1? Thanks
Device: Nexus 4
Rom: Stock KRT16S
Click to expand...
Click to collapse
Cruzfire said:
Also interested on put this baby on my nexus 5 but to stupid to do it myself,any help will be much aprecieted.
Click to expand...
Click to collapse
If you guys can upload your SystemUI I can probably do it for you

homeslice976 said:
If you guys can upload your SystemUI I can probably do it for you
Click to expand...
Click to collapse
Attached, thanks

PigFire said:
Attached, thanks
Click to expand...
Click to collapse
Here ya go. No reason anything should break, but for peace of mind please make a backup first. This is flashable in recovery. It will be black text, but I used method 2, so if you want to change the font color, all you need to do is decompile, open \res\values\colors.xml, change the hex value of <color name="batterymeter_percent_color">#ff000000</color>, and recompile.

i'm also having errors on compiling it..il just upload OMNI systemui instead.. TIA
View attachment SystemUI.apk

homeslice976 said:
Added notes in method 2 for making the digits slightly larger and/or bold..will keep playing to see if I can make them even larger
If you guys can upload your SystemUI I can probably do it for you
Click to expand...
Click to collapse
Thanks man try it later after work
Sent from my HTC One using XDA Premium 4 mobile app
---------- Post added at 09:23 PM ---------- Previous post was at 09:06 PM ----------
I can't compile the 2nd method and want the bold... https://docs.google.com/file/d/0B6ptKjzTSh3SUHJYZWNkeXhMTHM/edit?usp=docslist_api here's my systemui.apk if you could do it...I'd be very greatful..thank you for your awesome work..this is for a nexus 7.2
Sent from my HTC One using XDA Premium 4 mobile app

jefbuan said:
i'm also having errors on compiling it..il just upload OMNI systemui instead.. TIA
View attachment 2406866
Click to expand...
Click to collapse
Here ya go. No reason anything should break, but for peace of mind please make a backup first. This is flashable in recovery. It will be black text, but I used method 2, so if you want to change the font color, all you need to do is decompile, open \res\values\colors.xml, change the hex value of <color name="batterymeter_percent_color">#ff000000</color>, and recompile.

mrjaydee82 said:
Thanks man try it later after work
Sent from my HTC One using XDA Premium 4 mobile app
---------- Post added at 09:23 PM ---------- Previous post was at 09:06 PM ----------
I can't compile the 2nd method and want the bold... https://docs.google.com/file/d/0B6ptKjzTSh3SUHJYZWNkeXhMTHM/edit?usp=docslist_api here's my systemui.apk if you could do it...I'd be very greatful..thank you for your awesome work..this is for a nexus 7.2
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Here ya go. No reason anything should break, but for peace of mind please make a backup first. This is flashable in recovery. It will be black text, but I used method 2, so if you want to change the font color, all you need to do is decompile, open \res\values\colors.xml, change the hex value of <color name="batterymeter_percent_color">#ff000000</color>, and recompile. I also changed the font from sans-serif-condensed to sans-serif, bold

homeslice976 said:
Here ya go. No reason anything should break, but for peace of mind please make a backup first. This is flashable in recovery. It will be black text, but I used method 2, so if you want to change the font color, all you need to do is decompile, open \res\values\colors.xml, change the hex value of <color name="batterymeter_percent_color">#ff000000</color>, and recompile. I also changed the font from sans-serif-condensed to sans-serif, bold
Click to expand...
Click to collapse
Awesome...ty so much
Sent from my HTC One using XDA Premium 4 mobile app

[Guide] SuperuserMod for all 6.x Devices/Roms

Updated the SuperUser mode .. Click here
Firstly thanks to sagitt67 from 4PDA ( he did it )
I grabbed it and tested and working
Hope this should help all others
Requirements :-
* core-libart.jar
* services.jar
* Apktool/tickle my android
and patience
1. Decompile core-libart.jar
2. open core-libart/smali/java/security/Signature.smali
look for this method
Code:
.method public final verify([B)Z
in that method find this line
Code:
invoke-virtual {p0, p1}, Ljava/security/Signature;->engineVerify([B)Z
[COLOR="Red"]move-result v0[/COLOR]
Replace the red code with this
Code:
const/4 v0, 0x1
now find this method
Code:
.method public final verify([BII)Z
in that method find this line
Code:
invoke-virtual {p0, p1, p2, p3}, Ljava/security/Signature;->engineVerify([BII)Z
[COLOR="red"]move-result v0[/COLOR]
replace the red line with this
Code:
const/4 v0, 0x1
save and close
3. Now open this core-libart/smali/java/security/MessageDigest.smali
find this method
Code:
.method public static isEqual([B[B)Z
.registers 7
[COLOR="red"]const/4 v2, 0x0 [/COLOR]
Change the red line to this
Code:
const/4 v2, 0x1
save and close
Compile it and Replace
and Continued in next post

Continued
Now decompile services.jar
1. open services/smali/com/android/server/accounts/AccountManagerService.smali
Find this method
Code:
.method private isAccountPresentForCaller(Ljava/lang/String;Ljava/lang/String;)Z
look for this lines
Code:
iget-object v4, v0, Landroid/accounts/Account;->name:Ljava/lang/String;
invoke-virtual {v4, p1}, Ljava/lang/String;->equals(Ljava/lang/Object;)Z
[COLOR="Red"] move-result v4
if-eqz v4, :cond_2c[/COLOR]
cond_2c may vary with your code
in that 2 lines do the changes like this
Code:
[COLOR="red"]move-result v4 [/COLOR] to const/4 v4, 0x0
if-[COLOR="red"]eqz[/COLOR] v4, :cond_2c to if-[COLOR="Red"]nez[/COLOR] v4, :cond_2c
save and Close
3. Now open this services/smali/com/android/server/pm/PackageManagerService$InstallParams.smali
look for this method
Code:
.method private installLocationPolicy(Landroid/content/pm/PackageInfoLite;)I
find these lines
Code:
iget v8, p0, Lcom/android/server/pm/PackageManagerService$InstallParams;->installFlags:I
:try_end_22
.catchall {:try_start_10 .. :try_end_22} :catchall_5f
[COLOR="red"]and[/COLOR]-int/lit16 v8, v8, 0x80
Change the red to this
Code:
[COLOR="red"]or[/COLOR]-int/lit16 v8, v8, 0x80
save and Close
4. Now open this services/smali/com/android/server/pm/PackageManagerService.smali
in that look for this method
Code:
.method private checkUpgradeKeySetLP(Lcom/android/server/pm/PackageSetting;Landroid/content/pm/PackageParser$Package;)Z
in that look for these lines
Code:
iget-object v4, p2, Landroid/content/pm/PackageParser$Package;->mSigningKeys:Landroid/util/ArraySet;
invoke-virtual {v4, v3}, Landroid/util/ArraySet;->containsAll(Ljava/util/Collection;)Z
[COLOR="red"]move-result v4
if-eqz v4, :cond_20[/COLOR]
cond_20 may be different with your code
Change re lines to these
Code:
[COLOR="red"]move-result v4[/COLOR] to this const/4 v4, 0x0
if-[COLOR="red"]eqz[/COLOR] v4, :cond_20 to this if-[COLOR="red"]nez[/COLOR] v4, :cond_20
Now look for this method
Code:
.method static compareSignatures([Landroid/content/pm/Signature;[Landroid/content/pm/Signature;)I
and replace with this
Code:
.method static compareSignatures([Landroid/content/pm/Signature;[Landroid/content/pm/Signature;)I
.locals 11
const/4 v7, 0x0
return v7
.end method
and look for this method
Code:
.method private packageIsBrowser(Ljava/lang/String;I)Z
in that find these lines
Code:
iget-object v4, v4, Landroid/content/pm/ActivityInfo;->packageName:Ljava/lang/String;
invoke-virtual {p1, v4}, Ljava/lang/String;->equals(Ljava/lang/Object;)Z
[COLOR="red"]move-result v4
if-eqz v4, :cond_22[/COLOR]
cond_22 may be different with your code
Change re lines to these
Code:
[COLOR="red"]move-result v4[/COLOR] to this const/4 v4, 0x0
if-[COLOR="red"]eqz[/COLOR] v4, :cond_22 to this if-[COLOR="red"]nez[/COLOR] v4, :cond_22
Now save all and compile
replace both and Reboot
Tada
SuperUserMod Done....
#YourWish for this
Additional for Unlocked Bootloaders click here (complete mod)
Have Fun guys
Dont forget to mention me If you use my work

Thanks alot Buddy, really useful, I've been looking for this on some old thread.
Sent from my E6683 using Tapatalk

@venkat kamesh bro thanks for your tut
i do this but get error in service.jar
after edit , i want to recompile it but get this error:
Code:
Recompiling "services.jar" With Original Signature,
in work area "_WorkArea1", using "apktool_2.2.1.jar"
With Tickle My Android 14.2.0.0.
(tinyurl.com\ticklemyandroid)
----------------
I: Using Apktool 2.2.1
I: Smaling smali folder into classes.dex...
..\_WorkArea1\_working\services.jar\smali\com\android\server\pm\PackageManagerService.smali[7670,4] missing EOF at '.locals'
Exception in thread "main" brut.androlib.AndrolibException: Could not smali file: com/android/server/pm/PackageManagerService.smali
at brut.androlib.src.SmaliBuilder.buildFile(SmaliBuilder.java:77)
at brut.androlib.src.SmaliBuilder.build(SmaliBuilder.java:61)
at brut.androlib.src.SmaliBuilder.build(SmaliBuilder.java:38)
at brut.androlib.Androlib.buildSourcesSmali(Androlib.java:405)
at brut.androlib.Androlib.buildSources(Androlib.java:336)
at brut.androlib.Androlib.build(Androlib.java:292)
at brut.androlib.Androlib.build(Androlib.java:264)
at brut.apktool.Main.cmdBuild(Main.java:227)
at brut.apktool.Main.main(Main.java:84)
----------------
Recompile Not Successful!
how can i solve that?

Hamidreza2010 said:
@venkat kamesh bro thanks for your tut
i do this but get error in service.jar
after edit , i want to recompile it but get this error:
Code:
Recompiling "services.jar" With Original Signature,
in work area "_WorkArea1", using "apktool_2.2.1.jar"
With Tickle My Android 14.2.0.0.
(tinyurl.com\ticklemyandroid)
----------------
I: Using Apktool 2.2.1
I: Smaling smali folder into classes.dex...
..\_WorkArea1\_working\services.jar\smali\com\android\server\pm\PackageManagerService.smali[7670,4] missing EOF at '.locals'
Exception in thread "main" brut.androlib.AndrolibException: Could not smali file: com/android/server/pm/PackageManagerService.smali
at brut.androlib.src.SmaliBuilder.buildFile(SmaliBuilder.java:77)
at brut.androlib.src.SmaliBuilder.build(SmaliBuilder.java:61)
at brut.androlib.src.SmaliBuilder.build(SmaliBuilder.java:38)
at brut.androlib.Androlib.buildSourcesSmali(Androlib.java:405)
at brut.androlib.Androlib.buildSources(Androlib.java:336)
at brut.androlib.Androlib.build(Androlib.java:292)
at brut.androlib.Androlib.build(Androlib.java:264)
at brut.apktool.Main.cmdBuild(Main.java:227)
at brut.apktool.Main.main(Main.java:84)
----------------
Recompile Not Successful!
how can i solve that?
Click to expand...
Click to collapse
bro seems you deleted '.locals'
please recheck it
nothing more
Goodluck bro

what´s the diferencce with the davidMKD´s tutorial disable signature verification http://forum.xda-developers.com/showthread.php?t=2458144
I ve been using this method since kit kat and its working fine, and you only modified slightly services.jar nothing else. cheers

juanpirulo said:
what´s the diferencce with the davidMKD´s tutorial disable signature verification http://forum.xda-developers.com/showthread.php?t=2458144
I ve been using this method since kit kat and its working fine, and you only modified slightly services.jar nothing else. cheers
Click to expand...
Click to collapse
haha well said bro
but structure of signature verification is not same since 4.4 to till date
there are lot of modification in structure and security level of api developed in their best
seems you just seen the services.jar changes hmm
had you looked to core-libart.jar ?
and you just see lines bro ?
why don't you look the code back to java ( i meant from smali to java ) so you can know the changes what i did
read the java imports
https://github.com/frohoff/jdk8u-dev-jdk/tree/master/src/share/classes/java/security
read it get it
i had those changes too
the old guide is just allowing to install temporary ( if you already had old install and data is present)
but not a complete SuperUserMod
just for you to prove ( try only with marshmallow and this guide is from marshmallow )
for example add new settings.apk with new signatures replace it
clear data from recovery and check if your settings are there or not
Before commenting of comparison please go through the google, and try to read what changes are done ( analyze them in java )
then come to thread and give a comment
we are not ready to post something which is already persist/Working
Do tests and get back to here bro
Good luck bro

First, this is not superuser mod, this is three android patches from LuckyPatcher.apk
First two makes your phone very vulnerable, because you makes signature verification always true and disable .apk signature verification. (core-libart.jar)
Superusermod is just
Code:
comparesignatures
const/4 v7, 0x0
bla bla
All other just give you access for downgrade your installed apk (services.jar)
I think you must add this info (about core-libart.jar) to first post. Thanks.

Did it.all good!
Thanks bro!

@venkat kamesh bro is this need to do after these steps?
http://forum.xda-developers.com/showpost.php?p=68965462&postcount=1264
i mean we should to do it or steps of this page is enough ? ( i have unlocked bootloader )

venkat kamesh said:
haha well said bro
but structure of signature verification is not same since 4.4 to till date
there are lot of modification in structure and security level of api developed in their best
seems you just seen the services.jar changes hmm
had you looked to core-libart.jar ?
and you just see lines bro ?
why don't you look the code back to java ( i meant from smali to java ) so you can know the changes what i did
read the java imports
https://github.com/frohoff/jdk8u-dev-jdk/tree/master/src/share/classes/java/security
read it get it
i had those changes too
the old guide is just allowing to install temporary ( if you already had old install and data is present)
but not a complete SuperUserMod
just for you to prove ( try only with marshmallow and this guide is from marshmallow )
for example add new settings.apk with new signatures replace it
clear data from recovery and check if your settings are there or not
Before commenting of comparison please go through the google, and try to read what changes are done ( analyze them in java )
then come to thread and give a comment
we are not ready to post something which is already persist/Working
Do tests and get back to here bro
Good luck bro
Click to expand...
Click to collapse
sorry bro when i said "you just modified slightly the services.jar" I didnt meant yourself i meant in the david tutorial no your tutorial. i just wanted your explanation about yours because i didnt know the difference. Now its ok

juanpirulo said:
sorry bro when i said "you just modified slightly the services.jar" I didnt meant yourself i meant in the david tutorial no your tutorial. i just wanted your explanation about yours because i didnt know the difference. Now its ok
Click to expand...
Click to collapse
haha no worries bro
happy to explain
Good luck bro

Hamidreza2010 said:
@venkat kamesh bro is this need to do after these steps?
http://forum.xda-developers.com/showpost.php?p=68965462&postcount=1264
i mean we should to do it or steps of this page is enough ? ( i have unlocked bootloader )
i need to do both of them?
Click to expand...
Click to collapse
@venkat kamesh would you please clear me here?
thanks bro

As always venkat kamesh! Great guide bro!

venkat kamesh said:
haha no worries bro
happy to explain
Good luck bro
Click to expand...
Click to collapse
i dont know why Xperia M4 Services.jar and other file not have Smali Folder

Hello! Does this work on stock marshmallow .291 for sony devices? Also, does this work on locked bootloaders? Great tutorial BTW!

Can I do this if my services.jar is from another systemUI. I have a z3c and I flashed Xperia X sysui and it replaced my stock systemUi and services.jar

thank you bro
but after edit
any app not installed.

russel5 said:
First, this is not superuser mod, this is three android patches from LuckyPatcher.apk
First two makes your phone very vulnerable, because you makes signature verification always true and disable .apk signature verification. (core-libart.jar)
Superusermod is just
Code:
comparesignatures
const/4 v7, 0x0
bla bla
All other just give you access for downgrade your installed apk (services.jar)
I think you must add this info (about core-libart.jar) to first post. Thanks.
Click to expand...
Click to collapse
@russel5,
I am not familiar with how to decompile services.jar, and I am not sure I understand what this is. Do you know of any more basic of a guide on services.jar, deodexing and what it achieves?
Thanks a lot in advance,
MW

I have been served this guide to enable superuser mod in my xperia x
music widget particles requires superuser mod but my xperia x has it