MAC address unavailable, tried everything but still... T_T - Kindle Fire Q&A, Help & Troubleshooting

Hello,
Bought my kindle fire year ago,
Just up to jelly beans: http://forum.xda-developers.com/showthread.php?t=1778010 :highfive:
worked perfectly in 2 days, then my wifi stopped working, I cannot turn it on, it showed: Wifi MAC address unavailable
I went panic, flashed to every roms I could find: CM9 gede rom, hellfire, CM7 kang,................
still no use. every times I checked, it still show mac address unavailable :crying:
right now I use the original rom, 6.3.1, downloaded form amazon, but .......:crying:
I tried every tips and tricks I found in the forum: some mac-.... command, rename some kind of file (the orig file I don't remember its name), put the wlan-loader file into it,.....etc
still unavailable :crying:
what should I do now, it's my dad's fire and he gonna burn my ass if I won't fix it soon:crying:
help me please

Use idme command to set mac address
If you can get to a point where you can run a terminal emulator on the KF in superuser mode, you can type the command
Code:
idme \?
. What you see in response should include a line like:
Code:
mac 0x0030 [I] hhhhhhhhhhhh[/I]
where hhhhhhhhhhhh is replaced by a string of 12 hex digits. If you see something else there, or nothing, your Kindle doesn't have a mac address. (Even if you do have a twelve-digit hex string here, it may be a bad one.) You can give the fire a hopefully-good mac address by typing the command:
Code:
idme mac F0A22563[I]hhhh[/I]
where I chose 'F0A22563' because it is the start of one of my mac addresses and the last four hex digits can be anything, I think.
If you can't get a terminal emulator running on your KF, you can do the same thing using adb or fastboot on your computer with the Fire attached, but I'm much too tired to get into that right now.

Wi-Fi MAC Address: Unavailable
I tried various ROMs even stock ROM but I cannot get my Wi-Fi to work. I am on the same boat as tungnq, I even tried aarons510 solution with a terminal emulator but still the Wi-Fi MAC Address is Unavailable. I dont have any wifi configuration on my /system and /data. I cannot even find the file wpa_supplicant.conf. When I connect the Kindle to KFU, the wireless chip gets detected in the device manager as WAN MiniPort. So I think the WIreless chip is working but has it drivers deleted or corrupted. Please someone help me out with my current predicament.
Current ROM: Energy.7.31.2012.Kindle.Fire.CM9.ICS
Kindle Fire Model: D01400

I have the same problem. Can anyone show the way to fix?
Thanks

I run a terminal emulator on the KF. Command: idme \?
It shows can not open so that I can change the Mac address
Pls, tell how I can run it.

vinhntna608 said:
It shows can not open so that I can change the Mac address
Click to expand...
Click to collapse
What exactly does that mean? Are you saying the command 'idme \?' doesn't work for you?
"That's a special kind of stupid. The kind that makes me laugh."

soupmagnet said:
What exactly does that mean? Are you saying the command 'idme \?' doesn't work for you?
"That's a special kind of stupid. The kind that makes me laugh."
Click to expand...
Click to collapse
It shows that
Could not open /dev/block/mmcb1k0!
Can't read the idme.
So I can't change the Wifi Mac Address

vinhntna608 said:
It shows that
Could not open /dev/block/mmcb1k0!
Can't read the idme.
So I can't change the Wifi Mac Address
Click to expand...
Click to collapse
I don't know why it would say " Could not open /dev/block/mmcblk0" from entering the idme command. Can you post a screenshot?
"That's a special kind of stupid. The kind that makes me laugh."

This is from Terminal emulator running in superuser mode
Code:
[email protected]:/ # idme print
Reading idme data ...
version: 1.3
boardid: 807xxxx000000000
serial: D026A0A024xxxxxx
mac: E0CB1Dxxxxxx
sec: E9EPCF5OHIJFRP7UB6FD
bt:
pid:
pid2:
bootmode: 1
postmode: -
[email protected]:/ #
I've tried to change the wpa_supplicant.conf and figured out that ctrl_interface=wlan0 not tiwlan0. I've change it to tiwlan0 but then it was back to wlan0. I don't know why but I guess that makes my Mac address unvailable. How can I fix it?
Code:
[email protected]:/ $ export PATH=/data/local/bin:$PATH
[email protected]:/ $ su
10|[email protected]:/ # chmod 777 /data/misc/wifi/wpa_supplicant.conf
[email protected]:/ # cat /data/misc/wifi/wpa_supplicant.conf
update_config=1
[B]ctrl_interface=tiwlan0
[/B]
10|[email protected]:/ # chmod 755 /system/bin/wpa_supplicant
10|[email protected]:/ # chown system.wifi /data/misc/wifi/wpa_supplicant.conf
[email protected]:/ # cat /data/misc/wifi/wpa_supplicant.conf
update_config=1
[B]ctrl_interface=wlan0
[/B]

I have the same problem. Wi-Fi is grayed out. I cant turn it ON.
Installed v 6.3.2 Amazon pure stock software (unrooted) and when i go to settings / device wi-fi mac address shows as unavailable.
Tried changing Wi-Fi file in data/misc/wi-fi and didnt work, factory defaults reset didnt work, 20 sec pwr button reset did not work.
the idme \? shows the MAC address
idme mac XXXXXXXXXXXX changed the wi-fi mac address but the problem remains the same.
What else to do ?

same wifi and bluetooth issue
HEy iam having wifi and bletooth issue with this mod...
it says turning on wlan or bluetooth but takes forever and never turns on..
estored backup but nothing change problem still present....
in wifi and bluetooth mac adresses it is saying unavailable

Ernst tignedhe
I had this same issue and was able to solve it. In an attempt to put TWRP on my Kindle Fire HD, I broke the wireless.
These were the steps I followed: http://forum.xda-developers.com/showthread.php?t=2128848
The issue arises from flashing the incorrect boot version (kfhd7-freedom-boot-7.4.6.img). You have to use the version applicable to your OS, not simply the 7.4.6 version. Google for HashCode's goo.im page for the Tate device to find other versions.

fixed
tungnq said:
Hello,
Bought my kindle fire year ago,
Just up to jelly beans: http://forum.xda-developers.com/showthread.php?t=1778010 :highfive:
worked perfectly in 2 days, then my wifi stopped working, I cannot turn it on, it showed: Wifi MAC address unavailable
I went panic, flashed to every roms I could find: CM9 gede rom, hellfire, CM7 kang,................
still no use. every times I checked, it still show mac address unavailable :crying:
right now I use the original rom, 6.3.1, downloaded form amazon, but .......:crying:
I tried every tips and tricks I found in the forum: some mac-.... command, rename some kind of file (the orig file I don't remember its name), put the wlan-loader file into it,.....etc
still unavailable :crying:
what should I do now, it's my dad's fire and he gonna burn my ass if I won't fix it soon:crying:
help me please
Click to expand...
Click to collapse
if u have rooted phone turn off wifi and look for two files named .mac.info
delete them and do dalvik wipe. this worked for me!

aarons510 said:
If you can get to a point where you can run a terminal emulator on the KF in superuser mode, you can type the command
Code:
idme \?
. What you see in response should include a line like:
Code:
mac 0x0030 [I] hhhhhhhhhhhh[/I]
where hhhhhhhhhhhh is replaced by a string of 12 hex digits. If you see something else there, or nothing, your Kindle doesn't have a mac address. (Even if you do have a twelve-digit hex string here, it may be a bad one.) You can give the fire a hopefully-good mac address by typing the command:
Code:
idme mac F0A22563[I]hhhh[/I]
where I chose 'F0A22563' because it is the start of one of my mac addresses and the last four hex digits can be anything, I think.
If you can't get a terminal emulator running on your KF, you can do the same thing using adb or fastboot on your computer with the Fire attached, but I'm much too tired to get into that right now.
Click to expand...
Click to collapse
When I do the idme \? command in the KF terminal, with SU, it says "idme not found." What does this mean? I am trying to change the MAC address as I made a mistake earlier

Related

[APP] ADB enhanced Putty (replacement for "adb shell" command)

We all know that running "adb shell" from the command line is pretty crap, and when using a latter busybox version which has coloring support it's ultimately crap. One workaround was usually to start a telnet server on the phone, and use putty to connect to that telnet server. Actually there is a more easier way to do that which also works for non rooted phones.
Actually the Android Debug Bridge has a terminal connection feature (roughly speaking), which will be enabled after you connect to the adb server in "0006shell:" mode. You can actually use the putty to connect to this interface always, by setting the following things:
- Turn off line discipline in settings
- Use RAW mode to connect to localhost:5037
- Enter "0012host:transport-usb" (without quotes)
- Enter "0006shell:" (without quotes)
Now you've got a full fledged connection to your device. The main drawback is that it's tedious to repeat the above all the time, so I've made some modifications to the putty binary that adds a new type of connection, called "Adb"
To use the enhanced putty (via USB):
- Select Adb from the connection type list
- Enter "transport-usb" in the host (or any other connection string, check the adb socket interface documentation if you need something else than connecting via usb)
- Enter 5037 as port, if it's not already set there.
- Connect and enjoy (you might also save this connection, so next time you only have to double-click on the settings)
To use this via wireless adb:
- Connect to wireless adb using a command shell: "adb connect IPORT" (substitute ip and port for the real values)
- Enter "transport-any" in the host
- Enter 5037 as port if it's not already set there
- Connect and enjoy
To use this via the android emulator:
- Enter "transport-local" in the host. Everything else is the same
If you have multiple devices (for example multiple devices connected to usb and/or wileressly)
- Enter "transport:serial-number" in the host, where you substitute "serial-number" with the serial of the device you get by using "adb devices". Everything else is the same.
DL and source: http://github.com/sztupy/adbputty/downloads
Thanks
Great job
Love to use putty.
If this do what your say it's good buy adb shell!!
i am using putty for a long time, and i just tried urs, it looks great but i failed to connect coz i'm connecting to 2 devices....
so how can i add the -s param to specify which phone i'm gonna connect?
thx
EDIT: wow!!! i removed one of my devices and connected to it now!! ctrl-U now works!!!! THANK YOU!!!
EDIT2: quick question. if i use a normal putty, where to type in 0012transport-usb and 0006shell: ? i typed them in the term but it closed after 0006shell
Thanks. It works, but any idea how to get the up and down arrow keys to work on Putty? They work on the windows adb shell.
ykk_five said:
i am using putty for a long time, and i just tried urs, it looks great but i failed to connect coz i'm connecting to 2 devices....
so how can i add the -s param to specify which phone i'm gonna connect?
thx
EDIT: wow!!! i removed one of my devices and connected to it now!! ctrl-U now works!!!! THANK YOU!!!
EDIT2: quick question. if i use a normal putty, where to type in 0012transport-usb and 0006shell: ? i typed them in the term but it closed after 0006shell
Click to expand...
Click to collapse
The complete specification is here: http://android.git.kernel.org/?p=pl...T;hb=f41986bbc79055a4feed7266cac5c1b540296daf
This is what you can use:
- transport-any (either usb or local emulator)
- transport-usb (the only usb device)
- transport-local (the only emulator)
- transport:SERIALNUMBER (the concrete device with the appropriate serial number)
so in your case you have to use the latter.
For the second question, you need to ensure that all of the things are present:
- You are using RAW mode (connecting to localhost:5037)
- Line discipline is on "Force OFF" (in the terminal settings dialog)
- You make some pause between writing the two commands
- You don't press enter/backspace or any other key while entering the commands (the easiest way is to write the commands in eg. notepad, copy them, and paste them into putty by pressing ****+RIGHT MOUSE BUTTON)
hardcore said:
Thanks. It works, but any idea how to get the up and down arrow keys to work on Putty? They work on the windows adb shell.
Click to expand...
Click to collapse
The up and down arrow keys were actually handled by cmd.exe, which is non existent in putty. Instead it's now the responsibility of the shell to do the hard work. The included sh in the phone's sotfware (toolbox sh) is mostly useless here, but if you have busybox installed, you might want to run "busybox sh" after connecting (some rooted phones have busybox's sh as default, on them it should work out of the box).
Busybox's sh can not only handle the up and down arrows, but other things like tab completion works too.
sztupy said:
The up and down arrow keys were actually handled by cmd.exe, which is non existent in putty. Instead it's now the responsibility of the shell to do the hard work. The included sh in the phone's sotfware (toolbox sh) is mostly useless here, but if you have busybox installed, you might want to run "busybox sh" after connecting (some rooted phones have busybox's sh as default, on them it should work out of the box).
Busybox's sh can not only handle the up and down arrows, but other things like tab completion works too.
Click to expand...
Click to collapse
Use the ash.
edit:
Btw, thank you for this adb-putty.
sztupy said:
The complete specification is here: http://android.git.kernel.org/?p=pl...T;hb=f41986bbc79055a4feed7266cac5c1b540296daf
This is what you can use:
- transport-any (either usb or local emulator)
- transport-usb (the only usb device)
- transport-local (the only emulator)
- transport:SERIALNUMBER (the concrete device with the appropriate serial number)
so in your case you have to use the latter.
For the second question, you need to ensure that all of the things are present:
- You are using RAW mode (connecting to localhost:5037)
- Line discipline is on "Force OFF" (in the terminal settings dialog)
- You make some pause between writing the two commands
- You don't press enter/backspace or any other key while entering the commands (the easiest way is to write the commands in eg. notepad, copy them, and paste them into putty by pressing ****+RIGHT MOUSE BUTTON)
Click to expand...
Click to collapse
thx for u reply, but all i got in the log:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.10.09 13:10:54 =~=~=~=~=~=~=~=~=~=~=~=
0012transport-usb
0006shell:
FAIL0012device offline (x)
with adb turned on and working
sztupy said:
The up and down arrow keys were actually handled by cmd.exe, which is non existent in putty. Instead it's now the responsibility of the shell to do the hard work. The included sh in the phone's sotfware (toolbox sh) is mostly useless here, but if you have busybox installed, you might want to run "busybox sh" after connecting (some rooted phones have busybox's sh as default, on them it should work out of the box).
Busybox's sh can not only handle the up and down arrows, but other things like tab completion works too.
Click to expand...
Click to collapse
Yes and it will be great if busybox can handle history like linux
ADB over wireless ?
Hi, thanks for your great work
I'm using ADB Wireless
The first step is to connect first with
Code:
adb.exe connect 192.168.6.14:5555
And then the standard procedure
Is it possible for you to include these two phases directly inside Putty ?
So we just have to enter the IP address of the phone and here we go
PS : to disconnect, we have to do
Code:
adb.exe disconnect 192.168.6.14:5555
but that's not an obligation
seems to be a windows/putty problem because adb shell works wonderful on ubuntu with the default shell ...
btw. you can also easily get a sshd (dropbear) running. then you can ssh onto the device over wifi ... i can provide the binary+explanation if anybody is interested.
I'm very interested in that !
Sent from my GT-I9000 using XDA App
virus found
mathieumeuh said:
I'm very interested in that !
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
here is the explanation how to set it up (cyanogenmod wiki):
http://wiki.cyanogenmod.com/index.php?title=Howto:_Connect_to_Device_with_SSH
basically you have to create the keys on your pc and copy them onto the device. then you can connect via key-auth. if you want dropbear to autostart @boot you could add it to playlogos1 ...
and here are the binary's you need (including the missing dropbear-keygen) and a bash binary:
http://www.multiupload.com/B0L9FDQHPB
bash is optional of course but it's very nice to have tab-completion and the other improvements bash offers over sh. to replace sh with bash do the following:
Code:
cp bash /system/bin/
chmod 0755 /system/bin/bash
mv /system/bin/sh /system/bin/sh_OLD
ln -s /system/bin/bash /system/bin/sh
the chmod is really important. i forgot it once and then was unable to get shell access even over adb. was a pain in the ass to fix it again
jodue said:
seems to be a windows/putty problem because adb shell works wonderful on ubuntu with the default shell ...
btw. you can also easily get a sshd (dropbear) running. then you can ssh onto the device over wifi ... i can provide the binary+explanation if anybody is interested.
Click to expand...
Click to collapse
You seem to miss the point of this development. First, your method is mentioned as one of the possible workarounds in the first post. Second you need to have some kind of telnet/ssh server running on the phone, which you don't need, if using adb.
Meanwhile you don't even need a rooted phone or busybox or anything to get this thing working.
The main problem with adb shell under windows, that it uses the standard cmd.exe to run, and uses the standard cmd.exe's "readline" support, which only supports the up and down keys for history (and even that it only supports that within one session).
Putty is mainly the only good (xterm compatible) terminal emulator for windows (msys's or cygwin's rxvt is good too, but "adb shell" was programmed in a way that makes it kinda useless under rxvt too). There are two ways to fix this. One is to make adb.exe more comptible with rxvt, the other is to skip adb.exe entirelly and communicate with the adb server without it. This project utilises the latter.
But what is the advantage compared to "normal" ABD
But what is the advantage compared to "normal" ADB ?
Thank you!
DirkStorck said:
But what is the advantage compared to "normal" ABD
Click to expand...
Click to collapse
It has a real xterm compatible terminal emulator. Is you use busybox >= 1.17.1 you've got coloring, tab completion, resize events, keyboard events (applicatios like vi is working), etc.
This is the reason I recommend a faulty device: without the problems with the SGS the developments would go much slower Thank you for this putty, i have it connecting to the bash. Color coding and keys work perfectly.
Thanks for this Sztupy!
I hated using windows cmd.exe to access a linux shell

Got Ad-hoc wifi working on my Xoom! (binaries inside)

I've managed to build a version of wpa_supplicant that has ad-hoc enabled, by forward porting the patch in this thread:
http://forum.xda-developers.com/showthread.php?t=754961
After building and a couple of tests, it works.
To install, you need a rooted Xoom, of course, and just push the file to system/bin/wpa_supplicant.
Because zipfiles don't store permission, you have to make it executable as well.
Code:
adb remount
adb push system/bin/wpa_supplicant /system/bin/wpa_supplicant
adb shell chmod 755 /system/bin/wpa_supplicant
I also had to change the permissions on /data/misc/wifi/wpa_supplicant.conf for some reason:
Code:
adb shell chown system.wifi /data/misc/wifi/wpa_supplicant.conf
Then reboot, and try it!
It works with my Nokia N8 with JoikuSpot; I can't tether it any other way as the N8 doesn't support the PAN Bluetooth profile, and Android doesn't support DUN.
Don't forget to backup your files, and I am not liable, etc, etc.
The code I used is here:
https://github.com/kelvie/android-wpa_supplicant
Ok heres what happened to me..
I was able to push the first file and when I input the adb shell code it said the device was not connected I am rooted and had no problems rooting or access shell before
So I got a little cocky and thought that the port 5037 that adb communicates with was blocked so I typed adb tcpip 5036 to see if I could get shell access on that port well now when I type adb remount it immediately tells me error: device not found....help!
Got myself stuck without wifi (error)
Thanks for developing such a great app. If i m not wrong i think its working with all 3G carriers.
You can also turn your Motorola Xoom tablets to WiFi hotspot without rooting by enabling setting which are given here http://goo.gl/mgwdn
Also my xoom has been in debug mode and now all of a sudden I noticed that its not entering debug mode when connected there used to a little icon come up and not anymore it acts like nothing yet i can access it on my computer by going my computer and I see Xoom
Ok I got debugging mode back and xoom is plugged in now my problem is when the daemon server starts in adb shell it starts on port 5038
So when I try to copy "adb shell chmod +x /system/bin/wpa_supplicant" it still says device not found and thats if I copy and paste it exactly if I type adb shell it gives me the # Symbol then i put it "chmod +x /system/bin/wpa_supplicant" and it says bad mode
One good thing is I can now type /remount again so what I am doing wrong still stuck without wifi ;\
Ok I've tried everything except reflash my devices I've literally only been able to do step 1 which leaves me with no wifi because i cannot execute the shell commands so please a little help it's been a long night messing with this appreciate your time and I'd love to get this working!
kelvie said:
I've managed to build a version of wpa_supplicant that has ad-hoc enabled, by forward porting the patch in this thread:
http://forum.xda-developers.com/showthread.php?t=754961
After building and a couple of tests, it works.
To install, you need a rooted Xoom, of course, and just push the file to system/bin/wpa_supplicant.
Because zipfiles don't store permission, you have to make it executable as well.
Code:
adb remount
adb push system/bin/wpa_supplicant /system/bin/wpa_supplicant
adb shell chmod +x /system/bin/wpa_supplicant
I also had to change the permissions on /data/misc/wifi/wpa_supplicant.conf for some reason:
Code:
adb shell chown system.wifi /data/misc/wifi/wpa_supplicant.conf
Then reboot, and try it!
It works with my Nokia N8 with JoikuSpot; I can't tether it any other way as the N8 doesn't support the PAN Bluetooth profile, and Android doesn't support DUN.
Don't forget to backup your files, and I am not liable, etc, etc.
The code I used is here:
https://github.com/kelvie/android-wpa_supplicant
Click to expand...
Click to collapse
Ok...I tried this and got the same "bad mode" error at the
"adb shell chmod +x /system/bin/wpa_supplicant" stage.
So, I instead did "adb shell chmod 700 /system/bin/wpa_supplicant" and that was successful, so I finished the steps listed and can see my cell on my Xoom. I have a Windows Mobile 6.5 cell and my Xoom can NOW see my ad-hoc network. Thanks a lot Kelvie.
If not for the SDCard update from BRD, I think this thread would be getting alot more attention.
Not to be too mistrusting, but I am hesitant about loading this on my Xoom when it is posted by a new user with only one post.
Fusius said:
Ok...I tried this and got the same "bad mode" error at the
"adb shell chmod +x /system/bin/wpa_supplicant" stage.
So, I instead did "adb shell chmod 700 /system/bin/wpa_supplicant" and that was successful, so I finished the steps listed and can see my cell on my Xoom. I have a Windows Mobile 6.5 cell and my Xoom can NOW see my ad-hoc network. Thanks a lot Kelvie.
Click to expand...
Click to collapse
Hey that worked instantly love you!
PengLord said:
If not for the SDCard update from BRD, I think this thread would be getting alot more attention.
Not to be too mistrusting, but I am hesitant about loading this on my Xoom when it is posted by a new user with only one post.
Click to expand...
Click to collapse
I completely understand where you're coming from; but check my github repo, and google for me, I do leave a small internet trail...
I (mostly used to, don't do much anymore but answer the odd email) maintain an open source project (Basket for KDE), and try to participate in open source communities as much as I can.
I just did this to tether my Xoom Wifi to my phone, as I had no other way to get internet on the go.
Nice work. I tried to do this myself last week but ran into trouble just getting wpa_supplicant from the Android git to compile (with or without the changes)
First off, wow man thank you so much. I've been playing with this for a while and I've tried a number of different wpa supplicant files but they failed to initiate a scan of wireless networks. I just tried this one and it works great. I wanted to explain a different way to install it however for the people having ADB issues.
First you want to turn off your wifi. I have used the ADB method a couple of times but I find it easier to use Root explorer. Save the file to your Xoom, Copy it using root explorer, navigate to the system/bin folder and click mount R/W then paste the file into the folder replacing the original (make sure to make a backup!) then long hold on the file and view permissions, check all the boxes in the first two columns and the first 2 in the last column. (chmod 775) You can then restart your wifi and enjoy ad-hoc networks (no reboot needed.)
I've done this a couple of times and it works great. Thanks again.
First off, thanks a ton to the OP for getting this working!
Also, thanks to mr_wrong_0 for the root explorer directions. Not that I'm incapable of using the command prompt, it was just easier to do it this way.
mr_wrong_0 said:
First off, wow man thank you so much. I've been playing with this for a while and I've tried a number of different wpa supplicant files but they failed to initiate a scan of wireless networks. I just tried this one and it works great. I wanted to explain a different way to install it however for the people having ADB issues.
First you want to turn off your wifi. I have used the ADB method a couple of times but I find it easier to use Root explorer. Save the file to your Xoom, Copy it using root explorer, navigate to the system/bin folder and click mount R/W then paste the file into the folder replacing the original (make sure to make a backup!) then long hold on the file and view permissions, check all the boxes in the first two columns and the first 2 in the last column. (chmod 775) You can then restart your wifi and enjoy ad-hoc networks (no reboot needed.)
I've done this a couple of times and it works great. Thanks again.
Click to expand...
Click to collapse
Thanks so much for this! No issues at all. Wifi Xoom is tethered to my HTC Hero now.
Congrats on a killer mod! We are making progress nice and steady.
Installed, works great.
Thank you.
Great, thanks for your hard word.
I do have a question for those how have done this hack. I currently have an old iPhone 3g with tetherme installed and use Bluetooth tethering to give my Xoom (wifi only) internet access. This works great for me.
Is there are speed/battery life advantage to using wifi tethering instead?
Cheers
I don't know for sure. From what I understand wifi is potentially faster than bluetooth, but it can vary from device to device. I have noticed that my Epic seems to stay cooler and use less battery when broadcasting an Ad-hoc network vs broadcasting in infrastructure mode (using wifi tether 3.0.) But I've never been able to get my phone to tether with bluetooth so I don't know about battery life. One advantage of connecting over wifi is file sharing via apps like wifi file explorer. I have used that a lot to transfer files between my Xoom and my phone as well as the computer.
Noob question
Hello all,
Thank you very much for the patch.
I would like to try it out, but before that, I need to make sure of one thing;
If I root my Xoom, will I still be getting future updates from Motorola for the device if there is one? Or once I root it, is it impossible for me to update them from the manufacturer?
Thank you!
Thanks so much to the OP! I've been waiting for a reason to root my wifi Xoom. SDCard access was tempting, but I think this is the thing that pushes me over the edge!!
Thanks!!

Connect an HTC desire to an ad-hoc network

Ok, i found this tutorial.
ott.net/knowledge/htc-desire-adhoc/
Installed apk and trying to terminal adb shell command and getting error
abd: not found
what is wrong?
this terminal i runned from phone not from pc..
You have to run adb from pc. A guide for installing it can be found in my signature.
TouchPaled from Oxygen with Transparent XDA App
I started adb shell and when enter:
insmod /system/lib/modules/bcm4329.ko
I have this error:
insmod: init_module '/system/lib/modules/bcm4329.ko' failed (Operation not permitted)
atlantisu21 said:
I started adb shell and when enter:
insmod /system/lib/modules/bcm4329.ko
I have this error:
insmod: init_module '/system/lib/modules/bcm4329.ko' failed (Operation not permitted)
Click to expand...
Click to collapse
I have spent some time yesterday trying the exact same thing, I didn't succeed.
For your question:
Try using the command "su" before starting insmod.
Also remember to assign execute permissions to iwconfig, else it will not work either!
I probably did something wrong (or it just doesn't work on my ROM (I'm on redux2)) because i couldnt get it to work.
Also the app ad-hoc (follow the links on his page i think) fails for me. Wifi will go to error state and only reboot makes it work again.
If you succeed please tell us how you did it because I'm veeery interested!
Doesn't work with su command...
I trying to change bcm4329.ko permission with root explorer but nothing happening.
Maybe this is the problem?
And where is located iwconfig file?
Can I change file permission from adb shell and how?
Finaly WORKS!!!!!!!!!!!!!!
Because, I cant enable ad hoc on my Desire (I try many ways and nothinhg...),
I found another way to share wifi internet from pc to android phone.
This is my way:
Download VirtualRouter
Download fresh wifi drivers for Windows 7 64bit/32bit
Disable IP6 (if you have Windows 7 64bit)
After install VirtualRouter, reset your PC and VirtualRouter will start with your Windows in system tray.
In Network Connections, enable Microsoft Virtual WiFi Miniport Adapter if disabled.
Go to Local Area Connection (your default internet connection), properties -> sharing and check all box. Select home network connection -> Microsoft Virtual WiFi Miniport Adapter or Wireless Network Connection 2.
Run cmd as admin and type this:
netsh wlan set hostednetwork mode=allow ssid=Test key=password
netsh wlan start hostednetwork
VR automaticly write ssid and key and starting virtual network.
Desire CAN SEE this network, and you CAN CONNECT!
If you have problems go here.
atlantisu21 said:
Finaly WORKS!!!!!!!!!!!!!!
Because, I cant enable ad hoc on my Desire (I try many ways and nothinhg...),
I found another way to share wifi internet from pc to android phone.
[
Click to expand...
Click to collapse
I work in the same way (with connectify)>
Too bad you couldn't get ad-hoc to work, i would like to have that solution, it is more elegant.

IP / REST API for controlling Fire TV?

There does not seem to be an official documented API to send commands to the Fire TV via IP. The interface obviously exists and is used by the Fire TV Remote app. Does anybody know how to control the Fire TV via IP?
attunezero said:
There does not seem to be an official documented API to send commands to the Fire TV via IP. The interface obviously exists and is used by the Fire TV Remote app. Does anybody know how to control the Fire TV via IP?
Click to expand...
Click to collapse
I need the same thing so I can control it via Tasker. Unfortunately, communication is encrypted and far from simple (I sniffed the traffic with IP captcher)
djsvetljo said:
I need the same thing so I can control it via Tasker. Unfortunately, communication is encrypted and far from simple (I sniffed the traffic with IP captcher)
Click to expand...
Click to collapse
Well you could try decompiling the android apk and see if you can figure out what it's doing.
rbox said:
Well you could try decompiling the android apk and see if you can figure out what it's doing.
Click to expand...
Click to collapse
Unfortunately, my programming skills end with block diagrams, Tasker at most.
---------- Post added at 04:46 PM ---------- Previous post was at 04:42 PM ----------
BTW, do you know someone that knows SMALI? I need another app that needs a very simple change - doubling the output of one function. I was able to de-compile and find the function in .java but i can't compile it back to class/.smali (a friend of my helped me on this a bit).
Hi,
I am also interested in ip control for the Fire TV. So are there any news on this topic?
Thanks,
Wolfgang
If anyone is still interested it can be controlled by sending keyevents via adb. adb debugging must be enabled on the firetv and adb must be connected then you can send commands like so:
adb shell input keyevent KEYCODE_MEDIA_PLAY_PAUSE
A list of keycodes can be found here: developer dot amazon dot com/docs/fire-tv/remote-input.html#input-event-reference
I believe you can also find commands to start apps and things too.
despian said:
If anyone is still interested it can be controlled by sending keyevents via adb. adb debugging must be enabled on the firetv and adb must be connected then you can send commands like so:
adb shell input keyevent KEYCODE_MEDIA_PLAY_PAUSE
A list of keycodes can be found here: developer dot amazon dot com/docs/fire-tv/remote-input.html#input-event-reference
I believe you can also find commands to start apps and things too.
Click to expand...
Click to collapse
Can you connect to ADB via network (wifi) ?
https://forum.xda-developers.com/fire-tv/themes-apps/windows-app-simple-adb-remote-t2898206
TimmyP said:
https://forum.xda-developers.com/fire-tv/themes-apps/windows-app-simple-adb-remote-t2898206
Click to expand...
Click to collapse
It looks like it will be hard to implement via Tasker (which is what I needed in first place). Controlling mine with Harmony and Tasker Plugin for Harmony
djsvetljo said:
Can you connect to ADB via network (wifi) ?
Click to expand...
Click to collapse
Of course.
Code:
adb connect IP_of_your_FireTV
https://forum.xda-developers.com/fi...adb-remote-t2898206/post55882391#post55882391
djsvetljo said:
Can you connect to ADB via network (wifi) ?
Click to expand...
Click to collapse
Yes, that was my point. Sorry, thought that was implied.
I wrote this shell script to make sending the commands a bit easier. I use it in OpenHAB to control my FireTV via my home automation system Maybe somebody else might find it useful.
Code:
#!/bin/bash
# script to execute a comand on a fire tv via adb
# $1 : ip or hostname and connection port of firetv e.g. Snug-FireTV:5555
# $2 : command to execute
# array of available commands
declare -A COMMANDS=(
["UP"]="19"
["DOWN"]="20"
["LEFT"]="21"
["RIGHT"]="22"
["ENTER"]="66"
["BACK"]="4"
["HOME"]="3"
["MENU"]="KEYCODE_MENU"
["PLAYPAUSE"]="85"
["PREVIOUS"]="88"
["NEXT"]="87"
["WAKE"]="KEYCODE_POWER"
)
if [[ ! -z $1 && ${COMMANDS[$2]+_} ]]; then
# check for existing connection and create new if none found
CON=$(adb devices | grep $1 -c -i)
if [ $CON -eq 0 ]; then
adb connect $1
fi
# execute command
adb -s "$1" shell input keyevent "${COMMANDS[$2]}"
fi

Test Infrared

Hi there,
upon installation of a new TV and reprogramming the remote it seems that I cant control my Android TV shield anymore via Infrared.
Is there a way to test if the commands arrive?
I don't want to root my device.
In linux there was irw but I have no clue if it will work under Android .
Thanks in advance
Guy
Sounds to me like the problem lies with the Remote. If this were a Harmony Remote, then the answer would be as simple as telling you to redownload, and install the correct Shield TV Profile again.
But, for personal interest sake is this a 2015, 2017 16Gb or the Pro? 'Cause the new '17 Slim & Lite Shield TV does it like S0NY, and removed it to cut it's costs. So by that matric it couldn't work.
But, if I wanted to somehow diagnose this on a Command Line. I think I would do it something like this: (Note you will need a Laptop, or PC. Perhaps a Phablet with Android Terminal might even work)
Code:
$ adb devices
- to see if the Shield turns up. (Note: You will of course need to enable the Developer Settings, and turn ADB on first.)
Code:
$ su
- You may or may not need this but, to be S(uper)U(ser), you have to be root.
Code:
$ adb shell
- With this you now access the Shield (Or, other 'Droid type Boxen) On the command line leve!.
At which point you type this:
Code:
$ cat /proc/kmsg | grep -v -e CTS_ -e 'need set max' -e gpufre
- Which should start a running log. Now this may well be too busy, the first time you run it. 'Causing you to quickly swipe command + c to break it. But, on the second attempt it should be stable enough to show you any 'raw' inputs it receiving over the IR.

Categories

Resources