Develop Bugs

[Q] Wi-fi doesn't work what to do?

I tried to use different ROMs and Radios and no one can help me. When I turn on wi-fi it shows me "Error" all the time. What can I do to fix it? Some sayd me to open my phone, find wi-fi module and check a cable, but I don't have any chance to do it. What can you advise me? Thank

I had the same problem with HoneySense RC1, but I reflashed the ROM then UNITY V4 w/o booting between and has been working good...that's what I did with Honeysense but without knowing what ROM you're using it's hard to say what the problem is!!!!

I have Shokouhi Saga G2 ROM. But I installed a lot of different ROMs and no one helped me. Maybe today or tommorow I will install UNITY v4 and then write there what will happen. thank
installed UNITY v4 and nothing changed. Maybe i've done something wrong? Can You say me, how i should use this? I loaded ROM manager, booted into Recovery and flashed UNITY. What else? Thank

SuperWipeG2
You may wanna try SuperWipeG2:
http://forum.xda-developers.com/showthread.php?t=1044992
You will need to do a fresh install of a ROM but this has worked for me in the past also... Just flash the .zip like a ROM, then flash your ROM and then UNITY4 (only if you're using a Sense ROM)!!! Try that on for size, if that doesn't work you need someone more talented than I am!!!

BTTRDYZ said:
You may wanna try SuperWipeG2:
http://forum.xda-developers.com/showthread.php?t=1044992
You will need to do a fresh install of a ROM but this has worked for me in the past also... Just flash the .zip like a ROM, then flash your ROM and then UNITY4 (only if you're using a Sense ROM)!!! Try that on for size, if that doesn't work you need someone more talented than I am!!!
Click to expand...
Click to collapse
Done all this what you said me and nothing changed I turned on a wi-fi and it started and tried to find network, but after 5 seconds it shows me "can not start a scan for a network"
Maybe when I dropped my phone on the ground and that damaged a wi-fi module...

gingersense

Is there a way to for example flash wildfire s gingerbread rom and then change density?
Thanks.

No. Don't you think we would have had it a long time back then, if it were so simple? SFM is just that. Its based on the HTC Salsa Stock ROM, (The first release was based on the Wildfire S ROM, which had even more things not working) and you can see the results for yourself.

One more question... i installed jokersdroid 4.2 rom long ago, and i didnt have data connection. So i changed my rom to wildpuzzle, then cm etc. (everything was fine with data conn.) And now i flashed this http://forum.xda-developers.com/showthread.php?t=906557 (rooted), and the same problem appears... i tried to flash different radios, but still no change, i still cant activate my data connection. I really like stock roms, so i wanna keep this one... can you help me on this?
Thanks.

Aca902 said:
One more question... i installed jokersdroid 4.2 rom long ago, and i didnt have data connection. So i changed my rom to wildpuzzle, then cm etc. (everything was fine with data conn.) And now i flashed this http://forum.xda-developers.com/showthread.php?t=906557 (rooted), and the same problem appears... i tried to flash different radios, but still no change, i still cant activate my data connection. I really like stock roms, so i wanna keep this one... can you help me on this?
Thanks.
Click to expand...
Click to collapse
The custom ROMs include your operators APN by default (i.e. it's pre-configured). This is not the case in the Stock ROM (Since its untouched), so, you will have to add the APNs yourself, after which, I am pretty sure mobile data should work.

You have my thanks.

now i have other problems... sometimes i have singnal sometimes not, the same goes for data connection ... what now?

Honestly, I don't think this is ROM related, but, network issues. Were you getting such issues when you were on the Stock ROM (At that time when data wasn't working for you?).
Anyway, seems like the 2.34 Safe Flash RUU is causing you all sorts of problems (Which shouldn't really, because both WildPuzzle and JokerDroid use this very ROM as its base), so you might as well switch and install the WWE 2.22.405.1 Safe Flash RUU from here
http://forum.xda-developers.com/showthread.php?t=877977
You will have to re-enter APN again, as usual.

cant stop hitting the thanks button

i solved the problem with the signav and data conn... it seems it was all about nfinity kernel... strange...

Couple of issues with Wifi/Radio updates

So I recently installed MIUI, and as soon as I did my Wifi radio stopped working. Every time I try to switch it, it turns back off and says "error."
I figured this was a problem with my radio (26.02.01.15_M2) when I found another irksome problem. When I go to flash PC10IMG.zip the bootloader gets to "Checking PC10IMG.zip) and then quits and refuses to attempt the update.
Any ideas?
I apologize if this question has been asked, but I couldn't find anything similar in the short search I did.
Thanks in advance!

Could be a bad download? Which Radio are you trying to flash?
Download the radio from here http://forum.xda-developers.com/showthread.php?t=970809
Dont know what ROM you are running but Vision_Radio_12.52. 60.25_26.08.04.30 seems to be a good one,download the attached file for wiping the EFS(Important when flashing radios)
The link has further instructions and information,hope that helps

Hey, thanks for your response! I actually tried three different Radios from that thread (the first three), and none of them worked. I ran an efs wipe yesterday because I was having GPS problems, and these problems persisted after that...
FWIW, when I flash other kernels/ROMs, things work fine (CM7, PyroMod, Stock) but on MIUI these problems crop up.

alexonfyre said:
Hey, thanks for your response! I actually tried three different Radios from that thread (the first three), and none of them worked. I ran an efs wipe yesterday because I was having GPS problems, and these problems persisted after that...
FWIW, when I flash other kernels/ROMs, things work fine (CM7, PyroMod, Stock) but on MIUI these problems crop up.
Click to expand...
Click to collapse
Do you mean you can update the radio with other ROMs or do you mean that the wifi problem is only on MIUI?If your problem is only with MIUI cant help as I dont use that ROM but still doesnt explain your problem with flashing a radio as the bootloader is independent of the ROM

I think the wifi radio and the cellular radio are different and when you flash the radio firmware, it only updates the cellular radio firmware. Someone more knowledgable than me will probably correct me. It's probably something screwy with the MIUI roms which is effecting you. If you want to use MIUI then try one of the other MIUI roms that are out there and also notify the developer of the MIUI rom your using about your issue.

I hate the recent radios for G2 latest one from Bell sucks. Signal drops every few seconds, data connection is just OK. Very disappointed. I did the efs wipe and auto ril matcher V6 and all this other bs and I hate it.
Sent from my HTC Vision using xda premium

[q] gps not working on any custom roms

I can't get gps to work on any custom roms I install on my HTC DESIRE HD. The symbol comes on at the top when I enable and gps status ap shows that it is on, but it will just wont lock onto any satelites no matter how long i leave it on. Gps only seems to works on stock rom. I have tried loads of different gps.configs from this forum, even tried the stock rom config, Cleared AGPS updated AGPS without any luck.
Phone is rooted with bootloader unlocked.
current rom - CyanogenMod 11 by Mustaavalkosta
hboot 2. 00.0029
radio - 26.14.04.28.m
flashing with clockworkmod 5.8.0
S-on
stock rom DHD WWE 3.12.405.1 running android 2.35
I don't want to revert back to the stock rom, but I need my gps. Also the CyanogenMod seems to work best on my handset.
My first post so go easy on me
Any help much appreciated

Romsta said:
I can't get gps to work on any custom roms I install on my HTC DESIRE HD. The symbol comes on at the top when I enable and gps status ap shows that it is on, but it will just wont lock onto any satelites no matter how long i leave it on. Gps only seems to works on stock rom. I have tried loads of different gps.configs from this forum, even tried the stock rom config, Cleared AGPS updated AGPS without any luck.
Phone is rooted with bootloader unlocked.
current rom - CyanogenMod 11 by Mustaavalkosta
hboot 2. 00.0029
radio - 26.14.04.28.m
flashing with clockworkmod 5.8.0
S-on
stock rom DHD WWE 3.12.405.1 running android 2.35
I don't want to revert back to the stock rom, but I need my gps. Also the CyanogenMod seems to work best on my handset.
My first post so go easy on me
Any help much appreciated
Click to expand...
Click to collapse
there may be time to install rom fitting errors
try with
-fastboot erase cache
-fastboot flash boot boot.img
via fastboot
hopefully can help you
I expect from you, thx button

NO GAPPS
NO GAPPS?

WiFi not working on HTC one m8

Hi I pretty much know nothing about custom roms etc but I was forced to go for a custom ROM due to a friend wiping my phone but when I flashed Viper 3.2.1 everything was fine except the wifi button was greyed out, I also tried android revolution and the same problem occured. However it was fine when i tried candy5 but once i flashed google play the wifi stopped working again.
Does anyone know what the problem is and how i should fix it? thanks.

Hope you are on latest 4.4.4 firmware , link for the same should be in OP/FAQ of Viper.

fandam said:
Hi I pretty much know nothing about custom roms etc but I was forced to go for a custom ROM due to a friend wiping my phone but when I flashed Viper 3.2.1 everything was fine except the wifi button was greyed out, I also tried android revolution and the same problem occured. However it was fine when i tried candy5 but once i flashed google play the wifi stopped working again.
Does anyone know what the problem is and how i should fix it? thanks.
Click to expand...
Click to collapse
If you are only unlocked and not s-off you will need to manually flash the corresponding boot.img for each rom each time you flash a new rom. If you can get s-off you won't need to do this anymore.

Firmware needs to be updated. Confirmed on OP's other thread here: http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8-bricked-t2989202/page2
Also its not necessary to manually extract and flash boot.img on the M8, even when s-on. Folks giving this advice may be carrying over knowledge from an older HTC device.